13 best werner attic ladders

Product description

WERNER LADDER AA1510 AA1510 LADDER Aluminum ATTIC 250LB is rated for 250 pound load capacity; lightweight and easy to open and close with the included assist pole; installs into small openings for access to untapped storage space; ideal for hallways, closets and other tight spaces; non-marring feet; telescoping design gives you quick, hassle-free access to small attic openings anywhere or anytime; hardware for door included (door not included).

• Lightweight and easy to open and close
• Includes assist pole
• Installs into small openings
• Non-marring feet
• Ideal for hallways, closets and other tight spaces
• Floor to Ceiling Height Range

User questions & answers

Question:	When are you bringing back the telescopic ladder? This “compact” style doesn’t work if you do t have a lot of empty space inside your attic
Answer:	I've purchased a 32 oz and a gallon. I think I reviewed the 32oz.
Question:	Is it attached to the door
Answer:	The Alba website shows no parabens in the ingredients for this product. I believe the ingredients list on this Amazon listing is a misprint and should be corrected. If you’re in doubt, check the website or your local store (I think Target carries it) to verify the ingredients. Worst case, if you order this and it shows parabens on the product, just send it back and request a refund because it’s not the product you ordered if you ordered something without parabens.
Question:	what ladder is suitable for vertical position
Answer:	Smells horrid, like acrid oil paint. I can't use it and I usually like natural lotions, but the scent of this is unbearably strong and pungent.
Question:	I have a 30x30 rough opening and a 8' ceiling. Will this ladder work? Also, what is the quality of the ladder
Answer:	It smells but I wouldn’t say it’s a scent. Just lotion smell. It’s not strong but if you are sensitive it might bother you

Product description

ONLY FITS Werner Brand Attic Ladders MANUFACTURED AFTER February 2010. Includes: - Counter Balance Arms (Left & Right), Hardware, & Instructions. Fits These Werner Series Attic Ladders: Models Mk 5 WU2210 W2208 W2210. THIS KIT DOES NOT INCLUDE SPRINGS. SPRINGS ARE SOLD SEPARATE. Werner 55-2 Will Only Fit Werner Attic Ladders Mfg. After 2010. They Will Not Fit On Any Other Brand Attic Ladder.

• ONLY FITS These Werner Series Attic Ladders Made After 2010: Models Mk 5 WU2210 W2208 W2210

User questions & answers

Question:	I don’t know ,is it fit my ladder. If it isn’t fit my ladder, can I return it
Answer:	You could view this device as a Relay Activated wifi switch. There is a relay inside that closes when the correct signal is applied. Closing the contacts on the relay allows the door to activate open/close. The two piece halleffect (Magnetic) sensor is available to independently indicate when the door is open or closed. Main Unit Device housing has a blue and a red LED indicator. For my system, Blue LED indicates garage door is closed. Red LED indicates garage door is open.
Question:	I have an older set of wood pulldowns , the company is gone, are these generic enough to use on any / a different wood ladder
Answer:	The unit connects to the manual wall switch that opens and closes the door. As far as I know that includes all garage openers.
Question:	Hello does this product come with the pivot plates where the lag bolts go, because my plates are damaged
Answer:	I would avoid buying this. The software is terrible. It does not function in google like a door or light. So google home has no idea if your door is open or closed. You have to go into the app itself to see. If you say Hey google, open garage door, it will ask for a pin number but the app wont allow one to be set. Since google doesnt know if door is up or down, the loophole for the pin number is to say Close Garage Door to open and close it.
Question:	I have a older set pre- 2010 yet your picture for 2010 and over looks like the correct set? My hinge has that square box with the hinge -to pivot
Answer:	HI, yes, you must control your garage door separately! One of our controllers can only be used in one lifter!

Product description

Werner 55-1: Fits all Werner made attic ladders 2006 and Older.

• Werner 55-1: Fits all Werner made attic ladders 2006 and Older.
• If you don't have a Werner attic ladder the 55-1 will not work on your attic ladder.
• The 55-1 includes hinge arms, Hardware, & Instructions.
• Pivot Plates are not included with the 55-1.
• Use existing pivot plates or don't use them at all, more information in the 55-1 instructions.

User questions & answers

Question:	How do these "attach" to the existing pivot plate? Or do they screw into the frame another way
Answer:	Gates and garage doors that have a normally open type input for opening and closing on the control boards are compatible with Remootio. These input terminals are often called: Impulse, P.P, OSC, Start, Trigger, etc. depending on the manufacturer. You'll find the list of compatible gates and garage doors on our website: https://www.remootio.com/pages/compatibility If you can't find the model you are looking for, please let us know and we'll check it for you.
Question:	What size are the lab bolts? I lost them
Answer:	Remootio2 comes with a power adapter that can be plugged into an outlet. (The product does not include a battery). If you have any questions, please let us know
Question:	I need both arms for a 1994 attic ladder, please let me if you have them available. Thank you
Answer:	There are no additional fees or subscriptions. All the advertised functions work without any monthly fees. Voice control is also free to use. There is only a one time fee (the cost of the product itself).
Question:	Will this fit a Werner Model #2210 Spacemaster wood? The bolt broke out of the pivot plate, but pivot plate looks ok. Is pivot plate bolt included
Answer:	Yes, it works with Mighty Mule MM572W. You'll need to wire Remootio's control output to COM and CYCL terminals of the Mighty Mule control board. To see a wiring diagram, please visit https://www.remootio.com/pages/compatibility and type in MM572W. (Depending on whether you have a wall socket near your opener, you might need to add a 110V/230V to 5V power adapter to your order) If you have any questions, please let us know.

Product description

WERNER LADDER AA1510CA AA1510CA AL ATTIC LD 7'-9'10 is rated for 250 pound load capacity; lightweight and easy to open and close with the included assist pole; installs into small openings for access to untapped storage space; ideal for hallways, closets and other tight spaces; non-marring feet; telescoping design gives you quick, hassle-free access to small attic openings anywhere or anytime; hardware for door included (door not included).

• Lightweight and easy to open and close
• Includes assist pole; Material: Aluminum
• Installs into small openings
• Non-marring feet
• Ideal for hallways, closets and other tight spaces

User questions & answers

Question:	what is the weight limit on this ladder
Answer:	When it becomes the single tip,it will be 1.9inches lower.
Question:	I have a 20.5" wide x 5ft opening and I want a attic pull down ladder, also a 9ft ceiling
Answer:	Dear friend, The cane can be used in the snow, but the 4 tips on the bottom, extra glue is added to make them more stable.If used in the snow for a long time, it may cause the glue to be less sticky and may cause the cane to be less stable.
Question:	Does this ladder shorten if you want to shorten it when not in use
Answer:	I guess it is a matter of personal preference. For me, I wanted a cane that would stand on its own since I don't need it constantly and need to have it near by in case I have to have it. Also, check height range to be sure it will suit your height too.
Question:	Would this work for a 22x22inch wide opening
Answer:	Hello I wouldn't consider it soft but would suggest with Amazon get one and try it - I was holding off getting one for a while, came out of PT after she fixed it to fit me and some kid said "just like gramps" boy did that kill me good luck

Product description

Fits On Models AA08 AA10 AA10-QVC

User questions & answers

Question:	why does this little plastic latch cost so much? they break so easily
Answer:	5/16" x 3" hex head lag bolts
Question:	Where can I buy the strike for it
Answer:	If it is a Werner Attic Ladder made before 2010, then this will work. It will not work on any other brand or if the ladder was made after 2010
Question:	Does this come with both parts? The hook and the latch
Answer:	If the ladder was manufactured prior to 2006, then yes it will fit. The pivot point is replaced by a lag screw.

Product description

Fits D1100 series Werner ladders.

User questions & answers

Question:	Is this for a pair of
Answer:	Suburban Water Heater 170374 gas inlet may be what you are looking for. Look on eBay.

Product description

The Werner 250-Pound Duty Rating Wood Folding Access Ladder-Attic Ladder has a duty rating of 250 pounds (type I). Allows easy access into attics or storage areas in the garage. Counter balance mechanism eliminates sag and springiness. Every step is rodded for strength and durability hinges butt metal to metal to maintain rigidity. Easy to open and close, fully assembled ready to install. Smooth fiberboard door ready for painting.

• Floor to ceiling height range 7-foot to 8-foot 9-inches
• Rough opening width 22-1/2-inch by 54-inch length
• Full wrap-around door hinge minimizes heat loss
• Quality door is ready for staining and pull string allows for ease of operation
• Counter-balance mechanism eliminates sag and springiness and every step is rodded for strength and durability

User questions & answers

Question:	What are the inside and outside widths of the ladder
Answer:	Yes it could restrict the gas flow. Be for I changed the valve I would check and see if there is a problem the regulator or an obstruction in the line. Of all is good and a poor flame air adjustment. Good luck
Question:	Can I cut this down to work with a nine foot ceiling
Answer:	The connections were in the wrong place so it was the wrong type of valve for my application.

Product description

' Attic Ladder, Material Aluminum, Ceiling Height Range 7 ft. 11 In. to 10 ft. 3 In., Load Capacity 375 lb., ANSI Type IAA, Series AE Series, Rough Opening 22-1/2 In. x 54 In., Swing Clearance 70 In., Landing Space 63 In., Step Width 3 In. '

• Price For: Each Series: AE Series ANSI Type: IAA Rough Opening: 22-1/2" x 54" Ceiling Height Range: 7 ft. 11" to 10 ft. 3" Step Width: 3" Material: Aluminum Item: Attic Ladder Load Capacity: 375 lb. Swing Clearance: 70" Landing Space: 63" Country of Origin (subject to change): Mexico

User questions & answers

Question:	Does this ladder come with the attic door as well
Answer:	I wish I knew
Question:	width of step side to side
Answer:	The metal strike is no longer available.

Product description

The Ah Series Universal Attic Ladders Are Lightweight, With A Load Capacity Rating Of 375 Lb. The Strut Design Eliminates Springs And Allows For A Wide Access Opening. Easy-To-Open And Close. Wide Steps Are Slip-Resistant And The Feet Are Non-Marring. Ladder Is Trim Mable To Fit Ceiling Heights From 8' To 10'. Ladder Swing Clearance: 5'10". Ladder Landing Space 4' To 5'3". Plywood Door.

From the Manufacturer

Werner 10-Feet x 25-Inch x 54-Inch accommodates spaces that have extra wide ceiling openings. This durable ladder is built from lightweight aluminum and features adjustable feet for a universal fit. Non-slip step tread for safe climbing. This ladder fits ceiling heights from 7-Feet 8 in to 10-Feet 3-Inch and ceiling openings measuring 25-Inch x. 54-Inch 375-Pound Maximum Load Capacity.

• The Ah Series Universal Attic Ladders Are Lightweight, With A Load Capacity Rating Of 375 Lb

User questions & answers

Question:	My ceiling is 10 feet 5 inches. Is this ladder suitable
Answer:	This only comes with the white plastic latch as shown. The metal latch on the frame itself is no longer available.
Question:	The title said is 21.3 inches. Is that true ? Or has 25 inches like description said
Answer:	I believe so. I did.
Question:	How is the ladder adjusted for varying ceiling Heights
Answer:	No, they are not "generic" enough. They are manufacturer specific. If your ladder was not made after 2010 you should not order these.
Question:	Does this unit have a handrail
Answer:	Yes they do, but the hole pattern is different from what I had. The "newer" pivot plates were smaller. I had to drill out the pivot pins and use harden bolts and washers to mount my older style plates.

Product description

Rated for 375 pound load capacity; the strut design eliminates springs and allows for a wide access opening; easy to open and close; wide steps are slip resistant and the feet are non-marring; available for standard or extra-wide openings. Highlights: For access to attics, garages and storage spaces Ceiling height from 7 ft. 8" to 10 ft. 3" Minimum rough opening 22.5" x 54" Quiet gas strut for easy open and no-slam close - no bulky springs Adjustable non-marring feet and 15" x 3" slip resistant steps Oversized hand rail

From the Manufacturer

Werner 10-Feet x 22-1/2-Inch x 54-Inch This durable ladder features durable construction of lightweight aluminum. Non-slip tread for safe climbing. This ladder fits ceiling heights from 7-Feet 8-Inch to 10-Feet 3-Inch, and ceiling openings measuring 22-1/2-Inch x 54-Inch 375-Pound Maximum Load Capacity

• N/A
• Imported
• Durable construction of lightweight aluminum
• Fits openings measuring 22-1/2-Inch x 54-Inch
• Fits ceiling heights from 7-Feet 8-Inch to 10-Feet 3-Inch
• High-quality door for painting or staining to match your home decor
• Easy step-by-step online installation video

User questions & answers

Question:	Is the opening insulated? Other websites state it's R10 but nothing here states it but it's the same Werner AH2210 model
Answer:	Hi Bill, The ceiling height adjustment involves cutting the lowest ladder section to the approximate correct length, within +/- 1/2 inch. A hacksaw works well. Then you slide two feet onto the cut ends of the ladder rails, line it all up with the ladder fully deployed and the feet on the floor, clamp the feet to the rails, drill 1/4 inch holes for two hex head screws, and finally bolt the feet to the rails. I installed mine last October, and we love it. Be sure to follow the instructions in order. Don't skimp on the framing, especially if the ladder is perpendicular to your rafters. If your installation is in a hallway between two walls, screw or nail the rafters to the top plates of the walls before cutting them. In my case, one of the rafters I cut (the bottom member of a truss) is now supported on the inboard end only by the ladder framing. I used 3 1/2 in. Torx socket deck screws for the framing rather than nails.--John G.
Question:	is this ladder fire rated
Answer:	Although not seen in the picture, there is a handrail at the top on the section backed by the trap door. We have found this to be a very safe and comfortable way to access the roof of our facility.
Question:	I have a drop ceiling that is 7 ft 1 " will this ladder work? can you cut it that much
Answer:	I'm not sure which vendor you are looking at. One of them had the 350# ladder and a price too good to be true. Turned out the ladder was the light weight one. Returned it and bought through a different vendor and it truly is the 350# version. So, if it in the price range you see other places, it is 350. If substantially cheaper, it is not.
Question:	Ladder spec says 54" opening length is required. Mine is 53 1/2" rough framed dimension. Will ladder fit or can ladder be trimmed to fit
Answer:	Steps are wooden treads only, no extra metal support under the steps .

Product description

This extra heavy duty wood folding access ladder-Attic Ladder has a duty rating of 350 pounds. Allows easy access into attics or storage areas in the garage. Counter balance mechanism eliminates sag and springiness. Every step is rodded for strength and durability hinges butt metal to metal to maintain rigidity. Easy to open and close, fully assembled ready to install. High quality door can be painted or stained. Comes with a push/pull rod.

• Floor to ceiling height range 8-foot 9-inches to 10-foot 3-inches
• Rough opening width 22-1/2-inch by 54-inch length
• Full wrap-around door hinge minimizes heat loss
• Quality door is ready for staining and pull string allows for ease of operation
• Counter-balance mechanism eliminates sag and springiness and every step is rodded for strength and durability

User questions & answers

Question:	Does the duty rating include some overhead. I am 380 and it is rated at 350. I know standing ladders can hold 3 times their rating
Answer:	Hi I found my replacement by searching for the part number on the valve itself. Not the unit model number. I would be happy to help if you can give me all information off the valve!
Question:	can it be ship international address? what is the dimension of the package and weight
Answer:	No you will have to transfer your old fittings
Question:	Do they sell an insulating blanket for this so when it;s up it's insulated against the cold
Answer:	i suggest that you contact the manufacturer directly.,
Question:	is this ladder rated 1A or 1AA
Answer:	No

Product description

This Louisville elite series aluminum attic ladder has a working load capability of 375 pounds. This aluminum attic ladder fits ceiling heights of 7-Foot 8-inches to 10-foot 3-inches and has a Rough opening of 22.5-Inches x 54-inches. The elite AA2210 attic ladder features slip resistant cross-tread steps, adjustable shoes, an advanced cylinder design, and an ergonomic T-handle. The Louisville AA2210 aluminum attic ladder meets or exceeds the safety standards set by ansi.

From the Manufacturer

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model AA2210 number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily. It utilizes a gas cylinder instead of a traditional spring mechanism. The gas cylinders provide more clearance space allowing easy transport of large boxes. The gas cylinders allow the smooth opening and closing of the door, reducing the force needed with traditional spring operated attic doors. The gas cylinder design also eliminates destructive door slamming. This Louisville attic ladder features 3-1/4 inch deep steps to increase stability. The adjustable shoes on the Louisville attic ladder make it easy to fit with any type of flooring.

• ROUGH OPENING DIMENSIONS: 22-1/2 x 54-inches
• CEILING HEIGHT: Fits 7-foot 8-inches to 10-foot 3-inches ceilings. Step Depth : 3.25 inches.Rail Size : 3.125 inch
• STURDY AND SAFE: Able to hold up to 375 pounds, with reinforced, grooved steps to provide maximum traction. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb
• CUSTOMIZABLE ELEGANCE: Elegant and smooth finish with adjustable spring tension; Ceiling Height Maximum (ft): 10.25

User questions & answers

Question:	Do you have installation available for this item? Atticc ladder
Answer:	Yes it does
Question:	I have an attic ladder I want replaced that the outside frame measures 24 3/4" x 53 1/8". Would this ladder be the right size with shims
Answer:	It's made from China.
Question:	I have 22" wide, so mine is not as 'standard' as I thought. Neither would work then for me
Answer:	Yeah, it can be unfolded into straight 16feet telescoping ladder.
Question:	I ned a ladder that is art least 11 feet, which one should I get
Answer:	The height depends on angle of A shape, but most height is 250cm, about 8.3ft

Product features

Step 1 Measure the rough opening must be 54" by 22.5"

THE JOURNEY TO FIND THE CORRECT ATTIC LADDER STARTS HERE

TOOLS NEEDED:

Step ladder, hammer, Phillips screw driver, Framing square, drill with 1/8" bit, 2 ea 7/16" wrenches, 2 ea 1" x 4" x 32" boards, Wood shims, Tape Measure

Step 2 measure the floor to ceiling height

If the floor to ceiling height where you intend to install your attic ladder is between 7'8" and 10'3" this is the correct attic ladder for your space.

Step 3 Measure the area where the attic ladder will be opened to ensure proper swing space

You will need at least 74-inches to ensure that the attic ladder has enough space during opening.

Step 4 Measure the landing space for the attic ladder

Landing space may vary depending on your ceiling height. If the ceiling is 10 feet 3-Inches, you will need 67-inches of landing space. This is the maximum amount of space needed.

Louisville Ladder Elite Aluminum Attic Ladder 375 Pound Capacity

This Louisville Ladder Aluminum Attic ladder helps homeowners reach additional storage space. Homeowners looking to find extra storage space will find that the Louisville Attic ladder model number has many user-friendly features. The Louisville aluminum attic ladder allows a wider clearance to reach the storage space easily.This Louisville attic ladder features 3-1/4 inch deep steps to increase stability.

Product description

Louisville Ladder premium wooden attic ladders are ideal for obtaining easy, unobstructed access to small attic or storage areas. Able to hold up to 250 pounds, each ladder has grooved steps to provide maximum traction. A Louisville premium attic ladder is great for using in tight spaces where regular staircases won't fit, and it features exclusive metal ez-hang straps for quick and simple installation. Because each ladder meets the standards set by the ansi and OSHA, you can feel reassured knowing your Louisville Ladder is safe for your whole family to use.

Louisville Ladder Premium Wooden Attic Ladders are ideal for obtaining easy, unobstructed access to small attic or storage areas. Able to hold up to 250 pounds, each ladder has grooved steps to provide maximum traction. A Louisville Premium Attic Ladder is great for using in tight spaces where regular staircases won't fit, and it features exclusive metal EZ-hang straps for quick and simple installation. Because each ladder meets the standards set by the ANSI and OSHA, you can feel reassured knowing your Louisville ladder is safe for your whole family to use.

Offers Greater Access to Attic and Storage Areas

With the Louisville Ladder Premium Wooden Attic Ladder, you can gain unobstructed access to attics and other ceiling compartments. Able to be used in tight spots, this ladder unfolds to provide a compact and sturdy way for you to reach high-up storage areas. Not only does this ladder save you space, but it also saves you money on building expensive staircases. The Louisville Premium Attic Ladder folds and unfolds quietly. When you're ready to use it, simply tug on the ergonomic T-Handle that's designed to give you a secure grip for easy opening.

Built for Strength and Safety

Each Premium Wooden Attic Ladder is built to withstand 250 pounds of pressure (person included), and features grooved steps to provide maximum traction as you move up and down. Heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb. A "full grip" hand rail gives you added security as you hold a box in one hand and grip the ladder in the other.

The Louisville Premium Attic Ladder meets safety standards set by the American National Standards Institute and the Occupational Safety and Health Administration.

Designed for Easy Installation and a Proper Fit

This premium ladder features metal E-Z hang support straps to help you install it quickly and safely. Easy-to-follow instructions show you how to fit the ladder to the proper dimensions of your ceiling and floor, creating a sturdier base when opened and a perfect fit when closed.

What's in the Box

One Louisville Ladder Premium Wooden Attic Ladder.

From the Manufacturer

Louisville Ladder 10-Feet, Wood Attic Ladder Type I, Working Load Limit 250 LB, 22.5-Inch by 54-Inch by 8-Feet 9-Inch - 10-Feet, Perfect for Any Attic Space, In The House, Garage, Anywhere, Easy To Pull Down and Raise Up.

• Rough opening dimensions: 22.5-By-60-inches
• Ceiling height: fits 8-foot 9-inches to 10-foot high ceilings. Rail Size - 0.75 x 3.375 inches
• Sturdy and safe: able to hold up to 250 pounds, with reinforced, grooved steps to provide maximum traction
• Superior stability: heavy-duty hinges not only help the ladder unfold smoothly, but they also keep it from wobbling dangerously as you climb. Wire rod under each step provides added strength
• Quick installation: exclusive ez hang strap system makes for a quick and easy installation

User questions & answers

Question:	Is this ladder fire rated for garage installation? This is requirement in California
Answer:	It is 12" WIDE BY 1 1/2" DEEP
Question:	My studs are @22.5" on center, is this too small for the ladder? Or does the frame meant as 22.5" on center, rather than 24" (I think) on center
Answer:	sorry ... sounds like a safety standard I'm not familiar with
Question:	Will the L22 4P fit in a 22" opening
Answer:	Hi, I start collapsing from the top down. The most important item for safety is not having your fingers in a position that they get pinched when a section drops.
Question:	I bought a house with this style of attic ladder, but the springs are missing. Does anyone know the length and diameter of the springs
Answer:	NOT IF THE AREA YOU ARE WORKING IS ABOVE 10 FEET...IT IS SAFE , DURABLE & LIGHTWEIGHT...THE MAX EXTENSION IS 12 FEET