12 best roof zone ladder hook

Product description

Quickly and safely access steep roofs. Attaches to the top two rungs of any ladder or extension ladder. Simply roll/slide the ladder past the roof peak and turn over, the hook secures to the opposite side of the roof peak.

• Rubber Grip T-bar to prevent damage to shingles and metal roofs
• Yellow Zinc plated steel for longer life
• 2 ladder hooks are recommended for each ladder (this Kit includes 2 hooks)
• INCLUDES: 2 Ladder Hooks with Wheel

User questions & answers

Question:	What is the wheel for
Answer:	I roll the ladder up the roof with the wheels from another ladder and then flip it over. These are easy to use and very secure (we have a steep roof) I also wear a safety harness attached to a guy wire.
Question:	What are the dimensions? Need to go over a thick parapet
Answer:	the hooks are about an 8 to10" diameter arc......maybe a little less. definitely designed for a pitched roof i dont think youd do well trying to straddle even a narrow paraphet wall with these. hope thats helpful
Question:	How much do they weigh
Answer:	not exactly sure- but they are heavy. Hard to lift ladder with them installed!
Question:	Are the wheels on casters or fixed position
Answer:	These wheels are in a fixed position, not on casters. Of course, the wheels spin but the metal piece they are connected to is fixed. Hope this helps!

Product description

Qualcraft 2481 Ladder Hook with Wheel

The Qual-Craft ladder hook comes complete with a convenient wheel to roll the ladder along the roof without damaging shingles. Sporting a tough, steel construction for added durability, the ladder hook adjusts to fit between the top two ladder rungs. The ladder hook fits single or extension ladders in wood, fiberglass, or aluminum in both round and D rung styles. Two hooks must be used per ladder.

From the Manufacturer

The Qual-Craft ladder hook comes complete with a convenient wheel to roll the ladder along the roof without damaging shingles. Sporting a tough, steel construction for added durability, the ladder hook adjusts to fit between the top two ladder rungs. The ladder hook fits single or extension ladders in wood, fiberglass, or aluminum in both round and D rung styles. Two hooks must be used per ladder.

• Provides Ideal Method Of Securing The Top Of A Ladder To A Rooftop, When Used With A Paired Ladder Hook
• Both Hooks Fit Over The Top 2 Rungs Of The Ladder & Hook Over The Roof Edge
• Wing Nuts Of Both Hooks Are Tightened Holding The Ladder Firmly In Place
• Designed To Fit Single Or Extension Ladders
• Made From Powder Coated Steel For Superior Durability & Strength.
• Durable and convenient ladder hook with wheel
• Adjusts to fit between the top two ladder rungs

User questions & answers

Question:	With detention ladders, what keeps the back one from extenuating
Answer:	The lock on the ladder.....
Question:	Why does this one have the blade edge to shingles and not the other side as others have it
Answer:	This ladder hook is meant to have the wheel feature used to roll the ladder up over the ridge and then the ladder is turned over to hook on the ridge.
Question:	What are the dimensions of the hook portion? Need to go over a thick parapet
Answer:	6.75 inch opening. From flat portion total curve is 9.75 inches.
Question:	I just came across this item. we do work off of roofs quite a bit. What are the wheels used for, or rather, what is the purpose of the wheels
Answer:	The wheels roll the ladder up the roof and then you turn it over to hook it to the top edge. That keeps your ladder from tearing up the roof shingles. This works well especially since this model is so heavy because it is made out of steel instead of aluminum.

Product features

Qualcraft Safety Ladder Hook

The Guardian Fall Protection Ladder Hook provides an ideal method of securing the top of a ladder to a rooftop. When used with a paired Ladder Hook, both hooks fit over the top two rungs of the ladder and hook over the roof edge.

Then the wing nuts of both hooks are tightened, holding the ladder firmly in place. These hooks are designed to fit single or extension ladders, and are made from powder-coated steel for superior durability and strength.

Features

Ladder Hook Applications

Qualcraft Ladder Hook is specially designed to use in multiple industrial or residential construction jobs. It is generally used to fix the ladder to the roof shingles, allowing the personnel to work smoothly with precision.

Durable Construction

This red colored roof ladder hook is made from high-quality metal that makes it reliable to use in heavy-duty applications. This ladder hook can be used in pairs in order to secure the ladder to the rooftop.

Ladder Hook Wheel

This hook is accompanied with a wheel attached for smooth movement of the ladder. Thus, it can be easily fitted on different styles of ladders including D-style rungs or the round styled ladder rungs.

About Guardian Fall Protection

Privately owned and locally operated since its founding in 1993, Guardian has since been the top manufacturer and provider of safety products for America’s construction workers. Guardian is headquartered in Kent, WA, with offices and warehouses located throughout the United States. Supported by its hardworking employees and strong distributor partnerships, Guardian is constantly striving to enhance the safety and productivity of its customers.

Product description

Louisville Ladder stabilizer Fits extension and single ladders with rail up to 4'' by 1 3/4'' Designed for added stability

From the Manufacturer

Fits extension and single ladders with rail up to 4” x 1 3/4”. Holds 12 inches from wall and spans 48 inches to clear most windows. Stabilizers attach with 2 U-bolts and feature replaceable extra heavy duty rubber tips.

• SUPERIOR BUILD This Louisville stabilizer is made of superior quality with an elegant design and smooth finish In addition the stabilizer attach has 2 U-bolts which feature replaceable extra heavy duty rubber tips
• FITS ALL Clears most windows

User questions & answers

Question:	What is the stand off with it attached to the ladder
Answer:	You should be able to slide a passport right into either of the zipper pockets...It seems large enough.
Question:	Need to clean gutters and have vinyl. Appears, even though I have unit, I now find out it won't stand off against roof
Answer:	Yes, but it's still a little difficult to get out as it's a very snug ID pocket. But, after a little use it gets easier.
Question:	Will this fit an old Keller 24' aluminum with D rungs
Answer:	Made in India. Hope this will help. Thanks.
Question:	Can this stabilizer rest on the roof, or does it have to rest against the wall
Answer:	I don’t know the exact weight measurement but it is light - the leather is not heavy

Product features

Extra safety

Add another layer of safety to your ladder with this durable ladder stabilizer.

The ladder stabilizer fits extension ladders with rails up to 4'' by 1 3/4''

• roof ladder hook made of rubber surface coating and steel, for superior durability & strength，designed to fit single or extension ladders
• ladder stand stabilizer provides Ideal method of securing the top of a ladder to a rooftop
• ladder wall hook both hooks fit over the ladder top, hook over the roof edge for superior great stability and safety
• rubber grip prevent damage to shingles and metal roofs，2 ladder hooks are recommended for each ladder
• Approximate size; 8.26 inches / 21cmX 4.1 inches / 10.5cm

User questions & answers

Question:	How do I fix it to the ladder
Answer:	I just used 1 hook. Stability wasn't an issue since the sides of the ladder increase the surface area in contact with the roof. It didn't 'wiggle' at all. I did choose to 'tie off' the ladder using a stout rope to an old-growth tree on the opposite side of the roof as an added precaution - more for peace-of-mind than anything else. I've used it about 4 times this way and feel very confident in it's design. The only way I'd recommend using 2 hooks would be if 2 people would be on one ladder (yikes!) or if the pitch of the roof is excessive, or a combination of the two.
Question:	Do you get two hooks when ordered
Answer:	The safety issue is up to you, but I would consider the following advice safe enough for me (I weigh ~175 lbs). I don't have one of these ladder hooks yet, but it looks to me like you could put metal rods (threaded at each end) across your step ladder at two appropriately placed positions to fit this ladder hook and not get in the way of your feet when using the ladder normally or on the roof. I'd size the holes for a tight fit, and use lock washers under the nuts (and, being aluminum, I'd probably use 2 nuts and 2 washers on each end - a nut and flat washer on the inside side of the rail, and a nut and lock washer on the outside side of the rail; tighten one nut against the other to avoid too much inward pressure on the two rails ... none is needed). With a little more risk, you could use an appropriately sized wooden dowel (definitely size the holes for a tight fit, and I'd add a thin bolt on each end, as pins, to guarantee it can't slide out of the holes).

Product description

Titan, 81DR, Roof Hook

• Attaches to any style extension ladder
• Comes with wheel on back
• Only 1 needed per ladder
• All steel design

User questions & answers

Question:	What is the weight capacity of one of these? I have an employee that is around 280lbs
Answer:	The hook is very strong. Weight. Don't know i would think the latter would break before the hook does id just used it i way about 185

• Is Discontinued By Manufacturer :
• Date First Available :
• Manufacturer :
• ASIN :

User questions & answers

Question:	Is it compatible with the Werner multi position ladders
Answer:	Only if you were to modify it, and I would not do that!! It pieces together well with the ladder sections that it was designed for. I know it’s pricey, but it’s the best option for steep roof pitches. There are other ladder hooks out there to attach to a regular extension ladder, but I preferred this one. If you can get past the cost, I recommend it.
Question:	What is the diameter of the hooks
Answer:	Hook secures ladder when placed over the roof ridge. No need to bolt the hook to the roof except when the roof pitch is so low that the hook does not catch at the ridge.
Question:	will this work with a ridge vent
Answer:	Sometimes, depending upon the pitch of the roof, there isn't enough clearance to work with some roof vents.
Question:	will these work on any ladder or just Warner
Answer:	This product is made in Milwaukee WI.

Product description

Turns a ladder into roof climbing aide. Just attach to a flat ladder or one section of an extension ladder; then roll up to peek of roof and flip over for hook to grab. Reinforced roof ridge ladder hook with fixed wheel and swivel bar. Fits D-rung and round rung ladders. Easily installs on steep pitch roofs. . 300 lb capacity. Yellow. No. 11082: Fits Models: D-Rung and Round Rung, Material: Metal, Features: Wheel, Pkg Qty: 1

• Allows safe climbing on steep slope roof by attaching a section of extension ladder to the peak
• Only need one per ladder
• Fits D-rung and round rung ladders
• Reinforced rod around hook adds strength and stability

User questions & answers

Question:	Hi, did you use 1 or 2 hooks per ladder for more stability? Thanks
Answer:	Hello. Diameter of rungs is 0,9 inch and Diemeter of rope is 0,72
Question:	Does this work with a 7 foot aluminum step ladder? I have a short roof section I need to navigate for a window repair. Thanks
Answer:	✓ Ladders ✓ Shop vacs ✓ Strollers ✓ Bikes ✓ Kids’ scooters ✓ Skateboards ✓ Brooms and mops ✓ Shovels and rakes ✓ Leaf blowers ✓ Gardening equipment ✓ Bulky power tools ✓ Hoses and extension cords ...and SO much more!
Question:	What is the distance between ladder rungs (bottom of lower rung to top of upper rung) that this ladder hook will accommodate
Answer:	It’s perfect, I haven’t found anything it can not hold yet. My garage looks very organized now. Will buy more for other rooms.
Question:	Does the hook work over ridge vents
Answer:	Yes, it 's non-slip and can protect the things I hang on it from being scratched.Awsome Utility Double Hooks!

User questions & answers

Question:	Does this work with roofs with ridge vents
Answer:	Hello. Ofcourse can, but I reccomend you our 32 feet ladder with safety cord and (if 32 f is not enough) 16feet ladder. Here is link https://www.amazon.com/Emergency-Escape-ladder-Resistant-Ladders/dp/B07CMNB71M/ref=sr_1_8?ie=UTF8&qid=1548133613&sr=8-8&keywords=fire+escape+ladder+3+story
Question:	Where are these made
Answer:	12 inch

Product description

The Compact Goat comes with 4' poles and a soft touch hook pad and wheel. 20LF Total weight 16LBS.



Product Length: 20 Ft.



Weight limit do not exceed 350 lbs when using this device.



Roof pitch limits do not exceed 45 degrees /12/12 pitch.



Do not pull up when using this device on a roof.



Be sure device is secure on the roof before applying your weight.



DANGER watch for wires this device conducts electricity.



This device is to be used only as intended, intended use first man up, last man down and or one-man inspection tool.



Do not use as a work platform.



Always maintain a three-point stance.



*Package includes Five 4' poles plus a hook and soft touch pad and wheel.

User questions & answers

Question:	Can this be used with a rope
Answer:	I think it can only be purchased as it is on the pictures.
Question:	is the price really
Answer:	In the description the wallets that are 14.99 are synthetic and the ones that are 19.99 are genuine leather.

Product description

Roof Zone 19-Inch Ladder Extension Steel Stand-Off Ladder safety is our number 1 priority. We built our ladder stand off with durable steel materials to ensure you stay completely safe and secure when up on your ladder. Improves your stability no matter how high while also protecting your gutters and siding from costly damage. Why Choose Roof Zone? -19 inch stand off between yourself and whatever surface you are leaning against. -Premium gutter guard that prevents you from leaning an extension ladder against your gutters. - Features 2 rubber bumpers that protect your siding from damage. -Built with lightweight yet strong steel materials that will provide you with the safety and stability you’re looking for -They can attach to track rungs where no hardware is required. -Durable ladder accessories with minimal assembly required -Quick and easy installation. Install on your ladder within seconds. -Works Great With: Aluminum, Wood, and Fiberglass portable/extension and single section ladders. Type 1A, 1AA, I, II, and III. Safe and Secure: The Ladder Stabilizer Stand-Off is manufactured and tested to meet or exceed OSHA ladder standards (1926.1053). -Ladder Stabilizer Great For: General contractors Homeowners Gutter cleaners Window cleaners Installing Christmas lights Painting and other DIY home projects Specs: Width: 20 in. Height: 3 in. Depth: 35 in. Weight: 10 lbs

• 19-INCH WALL STANDOFF – Ladder standoff gutter guard protector that keeps you 19 inches away from the sidewall. Gives you plenty of room to safely work without the worry of damaging your siding, gutters, or roof. Prevents costly damage
• GREAT FOR EXTENSION LADDERS – Easily attach to your standard extension ladder. The stand-off easily attaches to your ladder within seconds with just minor assembly required. Attach to round rungs with no hardware required. NOT recommended for ladder hoists
• ADDED SAFETY & STABILITY – The ladder stand-off locks into place on your extension ladder giving you the stability you need to safely get the job done. Keep yourself a safe distance from the wall, gutters, or roof
• DURABLE MATERIALS – The Roof Zone Ladder Extension Stand Off is built with strong, high-quality steel materials to keep your extension ladder sturdy. Features 2 rubber bumpers on each end to protect whatever surface you are leaning against. Meets OSHA ladder standards
• GREAT FOR – Our ladder stabilizer standoff is great for general contractors, gutter cleaning, roofers, painters, installing Christmas lights, window cleaning, and for homeowners who like to do their own home maintenance

User questions & answers

Question:	can it be used with little ladder
Answer:	If it's a standard size ladder it should fit. The stand-off fits extension & single ladders with rail up to 4" x 1 3/4" and D-rung. Holds ladders 12" from walls & spans 48" to clear most windows and can be adjusted across the width.
Question:	Will this fit over a 36 inch window plus a couple of inches trim on each size
Answer:	I was skeptical about this being able to rest on the roof when I cleaned gutters. But it works. I have a shallow sloping roof and the stabilizer rests on the roof about 8 inches above the gutter with the ladder at an appropriate angle. I can clean the gutters without damaging them, which was why I purchased the stabilizer. It shouldn't hurt the shingles as long as you're careful.
Question:	Can it be used with an extension ladder that has round rungs
Answer:	No, it is paper envelopes
Question:	Will this extension work on Little Giant ladder
Answer:	It goes on and off sale

Product description

Ladder Lock Pro ladder stabilizer is an easy to install, fit for all types of roofs and strong metallic clamp to save you from accidents and stranding on roof due to ladder fell. You do not know you need it until you TRY it.

Increased Safety and Easy to Install

This Ladder Lock Pro is the first of its kind allowing you the ability to lock your ladder to stand against the gutters to perform work on the roof. Ladder Lock Pro ladder slip away protector is very easy to install. It is made of light weight aluminum and you can easily carry it to the top of the ladder to install it. You only need to tight 3 screws and your ladder grips the roof tightly. You can install it on any kind of roof and your ladder would standoff the wall firmly. It is made of metal so you may feel yourself extra secure as compared to other plastic or weaker material gutter guard ladder attachment or accessories in the market. It will increase ladder safety and grip for all roofers, contractors, building inspectors, firemen and everyone else that has to access the roof by climbing a ladder.

Perfect Gift Idea

You have a friend or family member who have to do a lot of roof works, whether they are painters, roof inspectors, electricians, cable technicians, windows cleaner or contractor who have to climb on ladder frequently; this is a perfect life-saving ladder buddy gift idea and they are going to love it.

Disclaimer

Ladder Lock Pro ladder stabilizer is not a human fall protection tool. Its purpose is to save ladder from falling. For fall protection use ladder tie strap or other safety equipment.

Leave all your ladder problems behind with the Ladder Lock Pro. We know safety is most important and that's why you need one! Click ADD TO CART Now!

• SECURE LADDER TO AVOID ACCIDENTS – Our ladder hooks will keep your roof ladder fixed in its place against the ridge to save you from serious accidents; Safety is always a top priority, no matter it is 8 feet or 18 feet
• EASY TO INSTALL IN SECONDS – Your safety on ladders is just 3 screws away; Lightweight ladder stabilizers are easy to carry and simple to install; Tighten 3 little screws, attach the pin and you are secure; Easy and much better than straps
• PEACE OF MIND – No need to jump off the roof because your ladder blown away while working; Hook ladder roof with our extension ladder stabilizers and work without any tension; No worries of ladder falling on neighbors or customers property
• FOR ALL PERSONS AND FOR ALL KINDS OF ROOFS – Our ladder safety tool will work for any kind of angled or flat roofs; Must buy for your loved ones working out on the roofs; Must be declared mandatory tools for all employees by their contractor
• OUR COMMITMENT – We are committed to reduce the roofing accident to zero; We assure you that our high-quality Aluminum equipment will never fail you. We are so confident about our quality that we offer lifetime manufacturer guarantee