9 best fan grille with springs

Product description

Spring-mounted Grille assembly for 663, 670, 671, 675, 688, 689, Sears and others. For use with Broan bathroom fans and ventilators.

• For use with Broan bathroom fans
• Easy to install
• Made with high quality material
• Country of Origin: United States

User questions & answers

Question:	My old cover is nutone d-30429....will this cover work? spring spacing roughly 6-3/4”. fan dimensions 7.5x7.5. thanks for your help
Answer:	There are two metal mounting brackets on the fan that mount to the structure with screws. A 3" flexible duct runs from the fan to a wall or roof cap. Two adjustable 3" metal screw clamps are required to hold the 3" flex duct to the fan & cap. An electrical circuit is required to power the fan & it requires an on-off switch. This requires a moderate amount of skill.
Question:	Will this work for a nutone c-350c2 b-unit fan
Answer:	Yes, it will. The model is 688. The "K" just indicates which version of the 688 your fan is.
Question:	will this fit a NuTone
Answer:	Housing is 7 1/4 Length, 7 1/2 Width, 3 5/8 Height / Grille is 9 Length, 9 1/4 Width ( Dimensions in Inches This is a very versitle fan and the 688 Series is typically all the same dimensions.
Question:	What is the distance between the spring clips
Answer:	Broan web site shows it as a 3" duct size.

Product features

Broan-NuTone BP46 Fan Spring Mounted Grille, Pack of 1, White

Grille Assembly, Spring-Mounted for (663, 670, 671, 675, 688, 689, Sears and others)

Product description

Genuine NuTone Broan S97006651 grille assembly with Springs. This Broan grille assembly S97006651 fits the following NuTone/Broan models: 663, 670A, 670B, 670C, 670D, 670E, 670F, 670G, 670H, 670I, 670J, 670K, 671, 688, 689. Dimensions:   10-Inch by 10-Inch.

From the Manufacturer

Genuine NuTone Broan S97006651 grille assembly with Springs. This Broan grille assembly S97006651 fits the following NuTone/Broan models: 663, 670A, 670B, 670C, 670D, 670E, 670F, 670G, 670H, 670I, 670J, 670K, 671, 688, 689. Dimensions:   10-Inch by 10-Inch.

• 10 In
• Fits Many Bath Fans From Nautilus
• Made in United States
• Genuine NuTone Broan S97006651 grille assembly with Springs
• This Broan grille assembly S97006651 fits the following NuTone/Broan models: 663, 670A, 670B, 670C, 670D, 670E
• And also fits: 670F, 670G, 670H, 670I, 670J, 670K, 671, 688, 689
• Dimensions: 10-Inch by 10-Inch

User questions & answers

Question:	would this fit Nautilus N590-A
Answer:	Did you ever get an answer to this question? I have the same old cover with the same part number and wondering if this is the right replacement. I see another customer said it replaces his 99110873B but not sure how different B is to A.
Question:	How do you get the v-clip to swivel up? (Mine won't slide over the hump and I'm afraid of breaking the plastic
Answer:	Yes. My installation has exhaust fan with heat lamp in center. So the cover would work if you just have a heat lamp. Seattle - Terry
Question:	Are there more credible dimensions for this product
Answer:	It’s a huge bare hole
Question:	What is the distance between the spring clips
Answer:	They fit my 4 year old perfectly
Question:	Does the philips 416743 heat lamp fit the opening of this grille [ broan 161]
Answer:	Dear customer ，it is compatible with PC or any device with 3.5mm jack.Thank you!
Question:	Would this be the same part as 99110873A
Answer:	Yes to both
Question:	I have a heat lamp that is a separate unit from the exhaust fan. Would this work safely on a HEAT LAMP ONLY unit? Thank you
Answer:	Yes. Volume limit is good for 5 year old granddaughter
Question:	Does this part have a lens cover or is it a huge bare hole
Answer:	I would reach out to Amazon. I bought mines almost two years ago and they stopped working a long time ago. I have since purchased a different headset.

Product description

Easily replace the cover on your Broan or NuTone medium sized bath with the Broan-NuTone FGR300S. This cover only fits Broan and NuTone fans with a housing size of 9-1/4" x 10". It is not compatible with other brands. Check the springs on your current cover to make sure they match the springs in the picture. Installation can be completed in 5 minutes or less. The cover is sized just right to conveniently cover existing drywall cuts for an easy, no cut install.

• COMPATIBILITY: Fits Broan and NuTone branded bath fans with a housing size of 9-1/4" x 10"; (Not compatible with other brands)
• RETROFIT STYLE: For an easy retrofit, check the springs on your current cover and make sure they match the springs in the picture
• EASY INSTALLATION: Quickly and easily installs in under 5 minutes
• DIY INSTALLATION: No drywall cutting or patching required, hides existing drywall cuts
• INSTANT UPGRADE: Blends with any decor to coordinate with most white ceilings

User questions & answers

Question:	I want to replace my NuTone S97011308 cover, would this one fit
Answer:	The FGR300S has a size of 11-1/2" x 12". It is suitble for a housing size that is 9-1/4" x 10". It would not be suitable for your unit as the housing is probably too small. .
Question:	how would i know what the springs look like
Answer:	THe FGR300S Kit is compatible with existing fan housing dimension of 9-1/4” x 10”. If the housing in the ceiling is a different size, then this grille will not be compatible. It is designed to fit Broan® and NuTone® InVent™ fan only models. Grille dimension: 11-1/2” x 12”. The springs are backwards compatible grille springs. If you need additional information, please contact Customer Service Department at 1-888-336-3948 between 7:30 AM and 6:00 PM (CDT) Monday-Friday.
Question:	Why don't you show a picture of the back
Answer:	Thank you for asking about the FGR300S. Our Marketing Department decides what photos are best to put on the site. I will advise them of your concerns. If you need to speak with a Technical Support person, they can be reached at 1-800-637-1453 between 7:30 AM and 6:00 PM (CST) Monday-Friday.
Question:	What are the dimentions and how far apart are the mounting springs
Answer:	The FGR300S has the following specifications: *Kit is compatible with existing fan housing dimension of 9-1/4” x 10”. *Grille dimension: 11-1/2” x 12”. *Fits Broan and NuTone InVent™ fan only models.

Product features

Broan-NuTone FGR300S Grille Cover, 11.25 x 11.75 x 1, White

Installation can be completed in 5 minutes or less thanks to backwards compatible grille springs. No wiring is required and the grille is sized just right to conveniently cover existing dry wall cuts for an easy, no cut install.

• Retrofits InVent Ventilation Fan Installations
• No Professional Installation Required
• No Cuts, Wiring or Dry Wall Patching
• Hides Existing Dry Wall Cuts
• Instant Upgrade Blends with Any Decor
• White Finish Coordinates with Most White Ceiling Paint
• Kit is compatible with existing fan housing dimension of 9-1/4” x 10”
• Fits Broan and NuTone fans only
• Grille dimension: 11.25” x 11.75”

Product description

Genuine NuTone Broan S97013576 grille with Springs. This Broan grille S97013576 fits the following NuTone/Broan models: Broan 676, Broan 684. grille Dimensions: 10-5/8-Inch by 11-1/8-Inch.

From the Manufacturer

Genuine NuTone Broan S97013576 grille with Springs. This Broan grille S97013576 fits the following NuTone/Broan models: Broan 676, Broan 684. grille Dimensions: 10-5/8-Inch by 11-1/8-Inch.

• Genuine NuTone Broan S97013576 grille with Springs
• This Broan grille S97013576 fits the following NuTone/Broan models: Broan 676, Broan 684
• Grille Dimensions: 10-5/8-Inch by 11-1/8-Inch
• OEM replacement part

User questions & answers

Question:	Springs or clips
Answer:	my grill came with springs and clips
Question:	Can I get a fan cover 12" x
Answer:	I have looked everywhere. I need 12x12” also. If you found one, where???
Question:	what is the distance between the spring units that connect the plastic grill to the motor frame
Answer:	5"
Question:	Is that pure white color or beige
Answer:	It is pure white

Product description

Replacement/optional grille. Designed specifically for Panasonic Whisper series models. Complements the style and appeal of the fan. Fits FV-05VK3, FV-08VK3, FV-08VKS3, FV-13VK3, FV-13VKS3, FV-05VQ5, FV-08VQ5, FV-11VQ5, FV-15VQ5, FV-05VF2, FV-08VF2, FV-11VF2.

From the Manufacturer

Panasonic fans are quiet enough that you might not even know they're on. Now you can accessorize their appearance too. Panasonic offers optional grilles for select Whisper series models to complement its innovative, advanced ventilation fans. The Panasonic FV-GL3TDA Grille is subtle, unobtrusive and blends in for a natural look. Made from ABS material, this light weight 13- by 13-Inch snap-on cover is slotted with a beveled edge and white finish. The FV-GL3TDA works with the following non-lighted Panasonic models: FV-05VK1, FV-08VK1, FV-08VKS2, FV-13VKS2, FV-05VQ3, FV-08VQ3, FV-11VQ3, FV-15VQ4, FV-05VF2, FV-08VF2, and FV-11VF2. The Panasonic FV-GL3TDA 13-Inch Designer Vent Grille is covered by a manufacturer warranty for period of three years from the date of the original purchase and is sold one item per package.

• Replacement/optional grille
• Designed specifically for Panasonic Whisper series models
• Complements the style and appeal of the fan
• Fits FV-05VK3, FV-08VK3, FV-08VKS3, FV-13VK3, FV-13VKS3, FV-05VQ5, FV-08VQ5, FV-11VQ5, FV-15VQ5, FV-05VF2, FV-08VF2, FV-11VF2

User questions & answers

Question:	will this fit a panasonic fv-0511vqc
Answer:	The v clip is designed to fit in little hole at the end of the metal strips on the edges. Stick them in the holes and keep working them upward.
Question:	I have a very old broan, can't get the model number off the unit. it is 9 1/4" x 10 1/2". will this cover work? thanks
Answer:	I am not sure but this one fit my fan perfectly....my house was built in 1985 so I'm guessing standard dimensions for this product is the norm...hope that was helpful...this was the only product i found to be a bright white as well
Question:	will this fit panasonic fv-08-11vf5 whisperfitez fan 80 or 110 cfm
Answer:	7 inches
Question:	will this cover fit a fv-11vq5 fan (Panasonic) it is not listed in the product discription
Answer:	Yes it fit perfectly

Product description

This is a genuine OEM Brogan square grille designed to fit with bathroom fan models 670, 671, 676, 684, 688, 689, HD50, HD80, 663, 670A-K and HD80. Replaces model 97008485. Grille Dimensions: 10-1/4-inch by 10-1/4-inch. Steel baked white enamel finish.

• This is an O.E.M. authorized part
• Fits various Broan models
• OEM Part Number S97011308
• This is a Broan replacement part
• Part Number S97011308
• This is an O.E.M. part
• Brogan replacement grille for models: 671, 676, 684, 689, HD50, HD80, 688, 663, 670A-K

User questions & answers

Question:	How far apart are the spring clips
Answer:	Yes, the fan can be wired so that the fan and light operate independently.
Question:	I have a cover that measures 9.5 x 10 will this accommodate it
Answer:	The AE110L has the following specifications concerning the LED: 11-Watt integrated LED lighting for energy efficiency; 3000K color temperature provides soft white light - ideal for bathroom illumination; LED lasts up to 25,000 hours for maintenance-free convenience.
Question:	what makes this product so special
Answer:	Unvented will NOT remove steam. It has a charcoal filter for smell which will not last long. Hire someone to vent your fan. You won’t regret it. Same goes for kitchen fans.
Question:	Does the cover come with the spring clips
Answer:	This unit does not use LED bulbs. It uses a sealed LED module. The model number for the replacement module is S99271607.
Question:	how difficult is the install without a preexisting fan
Answer:	On a scale of 1-10 and 10 is very quite. This is a 6 or 7
Question:	Will this replace 688-k? The K seem difficult to match. Thanks
Answer:	Yes. It is a typical heat/light/vent unit.
Question:	I currently have a 688-K, is this the proper replacement
Answer:	Heya Sandra,The exhaust duct right out of the housing is around 4 inches by 3 inches or so, however, a plastic part comes with the unit that changes the rectangle to a 4 inch circle so you can use regular old fashioned dryer ducting. The plastic part also has a flapper (valve) in it to prevent air from coming back through.It does not have a night light function. It only has the regular light, exhaust vent, and heater (which REALLY works!). Good luck,Todd
Question:	What diameter vent hose does this use? Is it
Answer:	Based on the question I am assuming you have the same unit now and are trying to replace it because either the heater doesn't work or something else is not working. I had to replace the heater element in mine . If your looking to replace your unit with a new one and unless you have access to the heater from the top or you have space to slide the unit from one side to the other you really can not unhook the unit from the hinge pins. What I did was left the shell of the unit in the ceiling and replaced the fan and the heater element from my new one. It's fairly easy just to unscrew all the components and replace them with the new parts. You will need to rewire the connections from both heater and fan to the in bound power source. Hope this helps

Product features

Broan 670 Ceiling/Wall Mount Fan, White Plastic Grille

Broan Standard Economy Series fans are versatile, compact, and ventilation solutions.

White polymeric torsion spring grille mounting.

Compact housing fits easily between ceiling joists or wall studs.

Grille Dimensions: 9” Length x 9-1/4” Width.

Product description

Broan-NuTone FGR101S Replacement Grille Cover for Ceiling Ventilation and Exhaust Fan is the perfect DIY Upgrade for your Fan. The Grille Cover allows you to easily replace your old bath fan grille/cover for the Broan 688 ventilation fan. Takes less than 5 minutes to install and involves no wiring and no drywall cutting - the easiest DIY ever. Grille Cover is compatible with Broan and NuTone models 695, 696N, 670 688, E050, 671, 689 Ventilation Fans to freshen up the look of our fan! Broan-NuTone is dedicated to providing you with fresh air quality and home solutions to help you live better.

• RETROFIT STYLE: Economy Grille Cover retrofits ventilation fan installations for quick results
• EASY INSTALLATION: Grille is easy to install, in just under five minutes you can replace your bathroom old grille with the new - no cutting, wiring or dry-wall patching required!
• BRILLIANT FINISH: Decorated with a white finish that coordinates with most white ceiling paint
• DIY INSTALLATION: No professional installation required and grille helps hide existing dry wall cuts
• COMPATIBLE MODELS: The Grille Cover is compatible with Broan Model #s 695, 696N, 670 688, E050, 671, 689 and with existing fan housing dimensions of 7. 5" x 7. 25"
• Note: The packaging on the item in the warehouse will state FGR101, however, is the exact same item as the FGR101S

User questions & answers

Question:	Is there a Broan replacement exhaust fan cover white 10x
Answer:	I ordered 7.5 x 7.5
Question:	I ordered one, it came in and installed it, but now I keep getting more in the mail, I have gotten two more
Answer:	It is probably a system error. Please contact our Customer Service Department at 888-336-3948 for assistance.
Question:	how far are the spring clips apart
Answer:	The grille springs on the FGR101S are 7.202 inches apart.
Question:	Does the fan include the hardware to attach it to the fan
Answer:	The FGR101S comes with grille springs so it can attach to the fan housing.

Product features

Broan-NuTone FGR101S Economy Replacement Square Ceiling Bathroom Ventilation and Exhaust Fans, Easy DIY Installation, White Grille Cover

Installation can be completed in 5 minutes or less thanks to backwards compatible grille springs. No wiring is required and the grille is sized just right to conveniently cover existing dry wall cuts for an easy, no cut install.

• Retrofits Economy Ventilation Fan Installations
• No Professional Installation Required
• No Cuts, Wiring or Dry Wall Patching
• Hides Existing Dry Wall Cuts
• Instant Upgrade Blends with Any Decor
• White Finish Coordinates with Most White Ceiling Paint
• Kit is compatible with existing fan housing dimension of 7-1/2” x 7-1/4”
• Grille dimension: 9-1/4” x 9-3/4”

Product description

This Bathroom Heater Cover consists of a grille and springs assembly. Part is used in the 163/164/9427/9422 double bulb heater. Fits Brogan bulb heater models: 163, 164, 9427P-R01, 9422P-R01. Grille Dimensions: 15-3/4-inch by 10-1/4-inch by 1/2-inch. White Finish.

• Brogan replacement grille and springs for models: 163, 164, 9427P-R01, 9422P-R01
• Grille Dimensions: 15-3/4-inch by 10-1/4-inch by 1/2-inch
• White Finish

User questions & answers

Question:	is this mounted with a V-spring or a coil spring
Answer:	Yes I just bought two of these ones few weeks ago and they fit perfectly
Question:	Do you by chance have one that is a grille with springs for a fan with a light insert that is the same size
Answer:	It's 13 x 13
Question:	does this come with the lens with rounded corners
Answer:	Yes
Question:	Does anyone know how far apart the springs are one this cover? I need a 7" span for this to work
Answer:	I bought this cover because of its oversize dimensions. I replaced the smaller cover I had in our bathroom with this one because of poor workmanship around the opening. This product worked perfectly to not only cover the fan but also the bad opening.
Question:	what are outside dimensions of the grille
Answer:	Not sure, I would measure my fan it would give you a accurate answer.