13 best bed bug heaters

• Kills 100% of bed bugs in all life stages, including eggs, nymphs and adults.
• Completely non-toxic and safe: No pesticides, no chemicals, just heat.
• Extremely easy to use: Set up, load with items and press on.
• Large size. Measures 23" x 37.5" x 23"
• One person set-up. Folds flat for easy storage.

User questions & answers

Question:	How much of a hit does using this give your electric bill
Answer:	Backpacks and luggage typically include a mix of items that will come up to temperature at different rates. For example, a heavy book will take longer than a t-shirt. Because of this, we really recommend a longer treatment time than necessary to ensure that everything is treated. While most items treated in a Ranger will be done within a 3-4 hours, we include an 8-hour setting on our timer so that users can be 100% confident without having to monitor temperatures. Electronics need to be evaluated on a case-by-case basis and as the manufacturer we cannot recommend heat-treatment for complex electronics. Basic electronics such as alarm clocks, remote controls, headlamps, etc. are fine with the prolonged exposure. Customers have treated higher end electronics without issue, but it can depend on the item – cell phones and tablets, for instance, are much more durable than laptops. We will release a series of videos with recommended practice for electronics in the coming months.
Question:	how long is the treatment
Answer:	Yes for queen size blanket so I would think so
Question:	Some library books I get have a thin plastic protective cover; will these covers hold up under ZappBug's temperatures
Answer:	Clothes will not shrink as they do in a dryer. A dryer blows very hot air and will remove moisture causing fabric to shrink or contract. The Ranger is a sealed enclosure that simply heats the contents without pulling away the humidity. For example, if you place damp clothing into the unit, the material will heat up and destroy any bed bugs, but it will not actually dry the clothing. Regarding shoes: Some synthetic materials may hold their shape if the shoes were tightly packed and 'squished' before treatment. Athletic shoes or fabric uppers have no issues. If after a treatment shoes are misshapen, they can generally be reshaped by either wearing the shoes - or by compressing material inside the shoe and letting them sit for a while.
Question:	Would it be safe to treat desk top computers and stereo receiver and speakers etc, in this device? Also, how long does one load take to treat
Answer:	The Ranger is perfectly safe all types of fabrics – including wool, leather, silk, cotton, etc. The temperatures inside the Ranger are similar to a car on a hot summer day or a commercial dryer. The heat, of course, is being uniformly delivered on all sides and maintained for several hours to ensure everything is treated.

Product features

Features

The ZappBug Heater is a non-toxic, natural, and environmentally safe way to kill 100% of bed bugs in all life-cycle stages – eggs, nymphs, and adults.

Thermal Units

The ZappBug Heater includes one 120-volt, 1500-watt thermal unit, which requires an independent 120-volt circuit to operate.

The thermal unit includes a timer that you can set. Once the set time is complete, the unit will shut-off.

The thermometer and wireless sensor (included) will allow monitoring of the temperature inside items within the unit. The battery-powered wireless probe sends the temperature reading to the thermometer base station. Once a sustained temperature of 120 degrees Fahrenheit is reached, bed bugs will die within minutes.

When placing items in the ZappBug Heater, it is essential to allow 6-to-12 inches of space between your items and the thermal unit. If the vent is blocked, a warning light and beeper will indicate the unit is beginning to overheat, and the thermal unit will automatically shut down. If the warning light is on, remove any items blocking airflow from around the thermal unit and allow 20 minutes for to cool before restarting the treatment.

Best Practices

Airflow is the key to eradication success. Leave at least 2 inches of space around items for hot air to circulate. All items need to be placed on the included blocks and/or support net to allow airflow around the bottoms, tops, and sides of items.

It is best to place the ZappBug Heater on a carpet, area rug, or blanket during treatment. Hardwood flooring, linoleum, or concrete will absorb heat from the unit during the treatment. Placing the Heater on a carpet, thick blankets, towels, foam pads, or even cardboard will provide the necessary insulation for effective operation during the thermal treatment.

It is best to load the ZappBug Heater more often with small to medium-sized loads. Large loads take longer periods of time to heat the items and are less efficient.

Easy Eradication and Prevention

The ZappBug Heater is designed to eliminate current infestations and prevent problems in the future. The ZappBug Heater can kill pests quickly, safely, and thoroughly.

The ZappBug Heater can be easily transported and within minutes setup to eradicating bed bugs, moths, carpet beetles, and other pests without hazardous sprays, powders, or other environmentally unsafe products.

The ZappBug Heater is an effective system used by homeless shelters, nursing homes, hospitals, and thrift stores to keep bed bug threats at bay and prevent re-infestations.

Travelers can quickly heat treats luggage, clothing, and other items and be assured that unwanted pests will not follow them home.

Product description

The DR-122 Bed Bug Toaster is a portable, chemical-free, high performance heating chamber with a quiet, multi-blade turbo fan that can exterminate existing and potential bed bugs. This powerful 18 cubic feet Toaster can reach 120F-155F in a few minutes from room temperature. It comes with a 2-tier steel rack shelf to help treat a variety of items more conveniently and safely without any hot spots or cool spots. The tent is constructed of heavy duty nylon with industrial grade zippers that ensure uses for many years to come. This energy efficient and well insulated Bed Bug Toaster is the ideal choice for heat treatment to kill bedbugs in all life stages.

• Upgraded and reliable heating system that quickly reaches 120-155F in minutes and effectively kills bed bugs at all life stages
• Huge treatment area of 38x38x26 inch
• 2-tire steel rack system that easily fits a variety of items for heat treatment
• Portable, rugged and collapsible tent allows easy storage after each use
• Includes Thermometer/timer with alarm
• High performance heating system that quickly reaches 120-155F in minutes
• Wattage: 1500.0 watts

User questions & answers

Question:	Can you put a large suitcase in this
Answer:	The heater is rated at 1.5 killowatts (1500W) and the average cost of electricity in the US is $.12kw/hr. So at the recommended/max treatment time of 6hrs they all multiply together to get $1.08 per run.
Question:	Can this be used for a couch
Answer:	Hello,We always recommend running the unit for 1 hour once it reaches 120F, but the time to reach 120F will vary depending on how much you place inside. In most cases it will take 3-4 hours to reach temperature, so 4-5 hours total is pretty normal for this unit. With smaller loads it can be faster, and if you're treating very large items like a duvet it can take longer. If you're not able to be there to monitor the treatment then we recommend selecting the 8 hour option on the timer as that will be sufficient for almost every load. Best,ZappBug
Question:	Can the shelves be removed to fit larger furniture in this
Answer:	I am not sure but i know the heat can be quite high inside. I have measured it at over 145 degrees in different places. It was high enough to melt a medicine bottle one time and melt the glue on the sole of and old pair of shoes another time. So my guess is it could melt the thin plastic protective cover.
Question:	Can I order extra shelves
Answer:	Yes, it it safe to treat electronics in a device like this. The components in most electronics will withstand temps higher than 130F. Most commercial electronics have a rated max around 70C (~159F) . I'd say it takes 60-120 minutes, depending on what you put in the device. You get a basic thermometer to track the temp. Put the batteries in the "outside" thermometer on first, then put the batteries in the one with the LCD display. Bury the outside therm as deep as you can among the items in the enclosure. You should see temps on both sides of the display. I got it to treat luggage after trips and thrift store finds. It holds quite a bit, and folds to a small size for storage.

Product features

Dr Infrared Heater Upgraded Version 2-Tier 18 Cubic feet Portable Bedbug Heater with Thermometer and Timer

The DR-122 Bed Bug Toaster is a portable, chemical-free, high performance heating chamber with a quiet, multi-blade turbo fan that can exterminate existing and potential bed bugs. This powerful 18 cubic feet Toaster can reach 120F-155F in a few minutes from room temperature. It comes with a 2-tier steel rack shelf to help treat a variety of items more conveniently and safely without any hot spots or cool spots. The tent is constructed of heavy duty nylon with industrial grade zippers that ensure uses for many years to come. This energy efficient and well insulated Bed Bug Toaster is the ideal choice for heat treatment to kill bedbugs in all life stages.

Features

• High performance heating system that quickly reaches 120-155F in minutes and effectively kills bed bugs at all life stages
• Huge treatment area of 38x38x26 inch
• 2-tire steel rack system that easily fits a variety of items for heat treatment

• Portable, rugged and collapsible tent allows easy storage after each use
• Includes Thermometer/timer with alarm, kindly refer the user manual for troubleshooting steps.

• Dry-Heat Decontamination Cycle Between 152°F - 161°F (67°C - 72°C) for treating critical equipment
• Guaranteed to Reach over 120°F / 49°C core temperature to kill all life-stages of bed bugs
• Lab Certified for Safety and Recognized as one of the most effective products on the market today
• Engineered for durability and effectiveness. Includes Built-In Timer and Digital Thermometer
• Large 18" x 14" x 29" is able to treat most sized luggage as well as books, bedding, etc.

User questions & answers

Question:	Is the product safe to use on backpacks or suitcases containing laptops, phones, and other electronics
Answer:	Just pick a damn color! It's a personal preference. Go out on a limb, do something on instinct, it's not a major decision.
Question:	Can i put a queen size mink blanket in here
Answer:	You should be able to buy it where you get the yoyo. Barbara J., Customer Service Mgr., The Lake Arrowhead Company
Question:	Will this shrink clothes like a tumble dryer and will it ruin shoes
Answer:	Yes. The string is wrapped around the middle. You cannot see in the package view but it is attached & ready to use when opened.
Question:	Okay to put wool in thermalstrike
Answer:	Depends on how tight the string is. The string is actually 1 long string that runs down and around the axial and then back up. It is twisted and different tricks will tighten or loosen it. When it is too loose it will not return at all. If it is too tight it will not sleep. your classic throw down and return tightens it 1/2 turn. A lunar loop loosens it 1/2 a turn.

Product features

Bed Bugs Change Your Life

You might not understand this statement if you haven’t experienced it, but an infestation can change your life in many ways. The hardships of bed bugs take on many forms at different level including mental, physical, and financial distress. In our case the infestation started just after Christmas 2008 – a time when most American’s didn’t believe bed bugs were real. A few months later we would find the infestation had spread through our bedroom and our children's.

The next day we called exterminators to find out that it would be almost two weeks before we could get treatment - and another four to six week until we'd likely be bug free. When you have bed bugs, there's not much you can do besides lie as bait. You wake up swearing something is crawling on you, but usually it's nothing. Generally family and friends are supportive, but distance themselves. I knew I had to do something.

Over the last 10 years, ThermalStrike has enabled people to feel confident when traveling, helped numerous shelters and charities continue their work, and help people take control when dealing with an infestation.

________________________________________________________________________

Meet The Ranger

1. Heat is 100% effective while chemical treatments (including many of those available only to exterminators) may only be marginally effective. Unlike when dealing with other pests, such as roaches, the chemicals must make direct contact with the bedbugs and can have limited effect on eggs. Over time a colony of bed bugs may even become immune or resilient to a particular chemical. Finally, chemicals that may leave a harmful residue, discolor, or damage items.
2. Heat is able to penetrate deep into hiding places that cannot be visually inspected or reached by chemicals. These are the type of places that bugs love to hide.

___________________________________________________________

Patented Heating System

Heat surrounds the bed bugs from all sides making it impossible to escape. Our uniform heat delivery system works without the complexity of blowers and allows for safer and effective treatment.

100% Usable Space

Our technology allows 100% of the space to be utilized. Blower systems require up to 6 inches of space around all sides of items being treated. This puts the Ranger on par with much larger treatment systems while taking up a much smaller footprint.

Keeps The Heat Inside

Blowers are noisy, heat the room, and have mechanical parts which can fail. The Ranger was designed to be efficient - so no heat or bugs can escape.

Safety First

Seven safety sensors monitor and control the temperature while the 2-4-8 hour timer shuts-off after treatment. Constructed of UL listed parts, the Ranger is safe, durable, and effective.

Used by Professional Exterminators to Protect Their Own Home

When you're dealing with bed bugs on a daily basis - you can't take chances. Ranger is the choice for many pest management professionals for its durability, effectiveness, and ease-of-use.

• PVC enclosure area is sealed, welded construction to prevent escape during treatment.
• Insulated outer shell of high durability 420D nylon with industrial zippers for years of use.
• Constructed with a UL recognized heating element which evenly distributes the heat around all 6 sides.
• Hassle-Free and Versatile. The Ranger is easy to load. No rearranging the contents to ensure air flow, unlike fan-forced heating systems.

Remove Ranger and Parts

• Ranger Heated Bag
• Instruction Manual
• Digital Thermometer
• Built-in Timer
• Four Poles & Floor Base

Insert Poles Into the Sleeves

Four sleeves are located on the body of the Ranger - two on the front and two on the back. The poles slide down and are locked in place with a Velcro strap.

Insert the Protective Base

Place the base at the bottom of the Ranger. The base protects the heating elements from heavy suitcase wheels and helps to distribute the heat around the floor.

Load, Zip, and Start Timer

Load contents into the Ranger. Use the thermometer to check temperatures inside - or just set the timer for 8 hours.

Product description

The RIDGID AM2288RT Air Mover is made for high volume air movement to quickly dry any space or surface. The 3-Speed Heavy-Duty induction motor provides 1625 CFM, select the ideal angle and speed to direct airflow for efficient drying of wet surfaces. The integrated wheels and collapsible handle allow for easy mobility while the 25 ft. power cord allows for extended reach. Use the Dual Outlets to safely daisy chain multiple air movers or power tools for maximum performance on the job. Vertically stack up to 2 units for convenient transport and storage. Buy with confidence with the RIDGID full lifetime warranty against material defects and workmanship.

• 1,625 CFM - High-volume air movement
• Daisy Chain - Includes 2 built-in outlets for connecting other units (8 amps max).
• Collapsible handle and wheels - Allows for convenient transport
• 25 ft. power cord - For extended reach
• Lifetime Warranty - Buy with confidence with RIDGID's full lifetime warranty

Product description

Powerful greenhouse heater , compact, energy-efficient & safe in operation - all these are features of the new Palma heater with digital thermostat by bio green. Its robust housing is constructed largely from stainless steel. With its timeless design, this floor-standing heater looks good in any situation. Palma is also the ideal solution for the smaller greenhouse where space is at a premium. Thanks to its compact design, slip-resistant rubber' & practical carrying handle, it can be used almost anywhere. The technology that we have developed ensures that the temperature is maintained reliably at a reasonable level with no energy-wasting temperature peaks in the greenhouse. The energy savings that are made are not due to half-hear-ted heating but to sensible use of the available energy. Heating a greenhouse – the challenge To keep a greenhouse frost-free, the temperature must remain above 32°F even in the corners. If the current of air does not reach there, then the temperature on the heater has to be really high, however, then a large proportion of the warmth goes up into the gable of the greenhouse, where it is not needed, while the corners may still dip down to minus temperatures. This is unsatisfactory, because heating energy is being wasted. In addition, there may be a significant temperature difference between when the heater switches on and especially with cheaper thermostats. This means if the thermostat has a switching differential of, for example, 43°F, then the greenhouse has to be heated up to 47°F if it is not to fall below the frost-free limit of 36°F before the heating switches on again automatically. Bio Green heaters avoid this unnecessary heating up by keeping the switching differential to a minimum, as can be seen from Diagram. This results in significant energy savings. Therefore, we as greenhouse specialists have developed a range of heaters which offer important advantages: High ventilation rate up to 460 m³/h. The fan setting. By using the fan setting, all the air in the greenhouse can be circulated even in the summer season. With the window open and the fan on, the greenhouse can be cooled down. Air circulation in the summer is also necessary for the pollination of many flowers and vegetables. Bio Green is a family owned manufacturer for greenhouse heaters since 1984 with a lot of expertise and experience in the greenhouse heating field.

• Easily heats spaces up to 120 ft. ² ideal for greenhouse heating, sheds, store room, garage, milk-house
• With digital summer/winter thermostat (110 V) UL - Approved and external sensor cable to measure the ambient temperature in the greenhouse.
• Stainless Steel housing, Floor-Standing greenhouse heater with display x4 splash-proof
• Stainless Steel heat elements - engineered in Germany for greenhouse heating use
• 5118 BTU/ 1500 W heating output - durable fan with bearings made for humit environments
• Very inexpensive to operate

User questions & answers

Question:	Will this be ssfe in a greenhouse with a polyethelene material's cover
Answer:	The response time is 6ms. I watched netflix on it without any problem. I'm not sure about playing games
Question:	Can the thermostat be placed outside and if not how long are the cords
Answer:	http://www.pcworld.com/product/1410160/asus-vs24ah-p-widescreen-lcd-monitor.html
Question:	If the power is interupted will the heater come back on when power come back on
Answer:	There's only one VGA connector on the back and that's it.
Question:	How has anyone determined that the thermostat isn't working? Have my temp set at 50 so it should be on - radio next to heater says
Answer:	per the discription:50,000,000:1 ASUS Smart Contrast Ratio dynamically enhances the display’s contrast to delivering lifelike images; Inputs of D Sub, DVI, HDMI

Product features

Palma 1.5 kW” / 5.120 BTUs Greenhouse heater

Powerful, energy-efficient, compact and safe – Bio Green‘s electronic fan heater, Palma, is a fantastic addition to your greenhouse, with it’s timeless design, stainless steel construction and solid build quality. Adaptable and efficient, the Palma is splash-proof rated to IP X4, and in addition to greenhouse use, it is also safe to use in damper rooms, like garages, basements, storage rooms, outbuildings and workshops – it can even be used as an emergency heater if required.

Ideal Protection Against Cold And Frost

Perfect for smaller greenhouses where space is at a premium, the powerful Palma features 1.5kW of heating power, and can circulate 163 cubic metres per hour, with temperature controlled by a single, easy to use dial. If required, the Palma can also be used to maintain temperatures below 32°F, via the addition of the optional digital thermostat (Palma digital version only) – making it suitable for the cultivation of plants that sprout in the frost.

Heating or ventilation in a snap

Palma ensuring that warm air is circluated quickly and evenly throughout your greenhouse removing any cold air pockets.

Air Movement

Palma Basic supplied with a built in capillary thermostat, or Digital - Palma Digital supplied with an additional electronic digital remote thermostat for instant switching accurate temperature control.

Spraywater proof

The portable, robust Palma meets very stringent safety standards; it has IPX4 protection and is thus splash-proof in all directions.

Thermostatic control (Palma digital version only)

The digital thermostat even allows you to select temperatures in the minus range. Thanks to the heater's temperature accuracy (+/-35.6°F), energy consumption is surprisingly low, saving you money.

Product description

The DR-122X4 large size bedbug heater system terminates bed bugs of all types, even growth stages like eggs, nymphs and adult bed bugs, making this the perfect non-toxic natural bed-bug treatment system. This system is large enough to treat bed bug infested items such as: sofas, beds, desks, seats, footwear, books, dressers, night stands, clothes, sheeting, appliances, and much more when you're ready to start toasting the bed bugs here's a few things to note: the DR-122X4 takes approximately 10 minutes to assemble. Due to the size of the product, we recommend a minimum of 150 sq ft space for set up. This bedbug heater system requires a total of 50 amps or 6, 000 watts to operate. Each heater needs to be plugged into a 120V Outlet and each Outlet needs to be on its own Circuit. The four heaters may need to use four extension cords (not included in package). a typical residential and/or commercial building has one Circuit per room. Do not use extension cords rated below 1500 watts or under 16 gauge.

• Wipes out 100% of bed bugs of all forms
• Safe, powerful, and non-toxic form of treatment
• Easy to set up and load infected items for treatment
• Sizable service space: (112L x 58W x 79H inches)
• Ideal for treating many infested items such as sofas, beds, desks and much more

User questions & answers

Question:	Did it kill the bed bugs and eggs
Answer:	Yes, it will fit a large suitcase.
Question:	Will this fit over a full size bed with frame & headboard
Answer:	We're not sure the size of the couch. If the couch fits inside the tent, then yes, you can do it.
Question:	I read that these didn't stay heat well and some came torn can i return this item
Answer:	The shelves can be removed - but the furniture would have to be pretty small.... And warning - do not put photos in this - I had placed a locket in there and the image was destroyed (I should have known better)
Question:	Is there a warranty
Answer:	Hello, thanks for your email. We don't have any extra shelves at the moment. Please check back with us in a few months.

Product description

Ventilate like a professional in high temperature work environments with the XPOWER X-35AR Professional Heat Resistant Axial Fan for Heated Environments (Does Not Produce Heat). The energy-efficient 1/4 HP motor produces up to 1720 cubic feet of airflow per minute while drawing only 1.6 amps at its highest speed setting, making it ideal for circulating hot air for thorough pest control, water damage restoration, and more. This axial fan can also be paired with a heater for pest control jobs (HEATER NOT INCLUDED). Rack/stand is included allowing 360-degree rotation for multiple drying positions. With built-in power outlets and dual thermal protection, you can safely link together additional fans or plug in items such as power tools and mobile phone chargers. It can also be stacked up to 5 units high for storage or transportation. Constructed with polycarbonate housing, this commercial-grade floor fan is designed for long-lasting durability. Measuring 18.6″ x 9.2″ x 19.4″ and weighing only 17.6 pounds, this compact and lightweight blower fits into tight spaces in workshops, job sites, garages, basements, tool sheds, or anywhere you need additional airflow. The 20 ft. long industrial power cord with wrap-around design and built-in handle provides convenient transportation from site to site. The XPOWER X-35AR Professional Heat Resistant Axial Fan for Heated Environments (Does Not Produce Heat) is backed by a 1 year manufacturer limited warranty. XPOWER Manufacture Inc. brings over 25 years of experience developing an expanding series of products with the most advanced technology in today’s market. By creating a fully integrated design with state-of-the art miniaturization, XPOWER’s innovative products are lightweight, quiet, and rugged – without sacrificing power or durability.

• PROFESSIONAL AXIAL FAN (Does Not Produce Heat): Designed to circulate air in high temperature work environments up to 180 degrees F and can be paired with a heater (NOT INCLUDED)
• ENERGY EFFICIENT 1/4 HP SEALED INDUCTION MOTOR: Produces up to 1720 CFM while drawing only 1.6 amps at its highest setting
• BUILT-IN POWER OUTLETS: Daisy chain multiple fans for a wider range of coverage
• ADJUSTABLE FEATURES: Rack/stand included allowing 360-degree rotation for multiple drying positions
• LIGHTWEIGHT AND PORTABLE: Measures 18.6″ x 9.2″ x 19.4″ and weighs only 17.6 pounds with a built-in handle for convenient storage and transportation

User questions & answers

Question:	what is the max operating temperature of the fan? Can it handle 170f being blown through it like an exhaust fan would
Answer:	Absolutly...cant see why not. If the greenhouse is safe the heater is too
Question:	How many of these units will be required to heat a 10X12 room to 120F to kill bedbugs
Answer:	No I would not place it outside but if you do I would make sure that its covered. Unfortunately the cords are not as long as i expected them to be. Their shorter than 6 feet, probably around a 4 foot cord length.
Question:	What the voltage
Answer:	I did not know the answer so I unplugged mine, waited a few minutes, & plugged back in. My Thermo2 controller went back to the setting I had entered. Don’t know about an extended power outage.
Question:	What is the cfm on low setting
Answer:	I set mine at 70 degrees. I have other thermometer inside my green house (6 x 8) and the thermometer reads 3 - 5 degrees lower that the Palma Heater.

• POWER REQUIREMENTS: The ZappBug Room is easy to transport, power up and operate in residential or commercial locations. The Room’s extermination system uses four independent thermal units. Each unit requires a separate 120 volts, 1,500 watts circuit.
• SUPERIOR BED BUG KILLER: The ZappBug Room system kills 100% of bed bugs in all stages of the parasites’ life cycle – eggs, nymphs and adults.
• EASY TO USE: The ZappBug Room is a snap for anyone to assemble. Once setup, simply load the Room with items and press the power button. The Room measures 6.5 feet-by-9.25 feet-by-5 feet It is large enough for a full-size couch or bed frame and mattress.
• LARGE CAPACITY: Large enough to offer complete bed bug removal for couches, mattresses, furniture and items big or small. Bed bugs can be eradicated in multiple items at the same time because of the expansive size of the ZappBug Room.
• SAFE, ENVIRONMENTALLY NONTOXIC AND NATURAL: No need to use potentially harmful bed bug sprays or insecticide powders. The ZappBug unique thermal heating system rapidly kills all bed bugs while protecting your family from the unsightly nighttime bites from the parasites. The ZappBug Room is also safe for use around pets.

User questions & answers

Question:	How long does it take for the temperature to reach 135 degrees
Answer:	Yes if used according to instructions.
Question:	How long do you have to leave items in the chamber in order to kill all stages of the bedbugs
Answer:	Tent size is 58w 112 L ,it should fit a standard full size bed 54* 75 no problem.
Question:	Will the heat penetrate into the non removable cushions and interior of a thick leather recliner sufficiently to raise the temperature to 120 degrees
Answer:	Any damaged item always can be replaced or refunded
Question:	Is the Zappbug room durable? Does it tear easily
Answer:	Yes there is a warrenty

Product features

Features

The ZappBug Room is a nontoxic, natural and environmentally safe way to kill 100% of bed bugs in all life-cycle stages – eggs, nymphs and adults.

Thermal Units

The ZappBug Room system includes four independent thermal heat units. Each requires a separate 120 volts, 1,500 watts circuit. Each thermal unit includes a timer that can be set and left to exterminate bed bugs, and then it will power down the heat units when the process is completed. Each unit has a safety warning light and beeper that indicates if the unit is overheating. If the warning light flashes on, remove any items blocking airflow circulation out of the thermal chamber. Allow 20 minutes for the Room to cool down, and then restart the treatment process.

Recirculation Fan

The ZappBug Room recirculation fan is another added feature. The fan allows hot air to fully circulate in and around items for quicker, safer treatments.

Foldable Frame

The ZappBug Room has an easy foldout frame that is popped out and up. The frame can be quickly setup, and then the fabric tent is secured to it.

Multiple Loading Options

When beginning the extermination process, the ZappBug Room’s doors and walls are zipped open. This feature allows large or small items to be quickly loaded from three open sides into the chamber. A foldable cloth floor gives the option of pushing or rolling heavy objects into the unit. This feature is particularly helpful when one person is loading items into the chamber.

Transport And Power Up

The ZappBug Room is specifically designed for operation in residential or commercial locations. The ZappBug room can be easily transported to any location.

The ZappBug Room is simple to move, setup and operate. One person can assemble the Room on site in less than 10 minutes. The ZappBug Room includes timers that automatically shut-off the thermal units when the extermination process is complete. A wireless digital thermometer with three probes is included to ensure the internal temperature of the items in the chamber rises above 120 degrees Fahrenheit. Bed bugs die once the temperature reaches 120 degrees or above.

The Process

During the extermination process the temperature inside the room ranges from 120 degrees Fahrenheit to 155 degrees, which will kill all bed bugs and is safe for beds frames, mattresses, furniture and most personal items.

The heaters are designed for safe and secure operation. There is also an added tip-over security feature. If an accident occurs, the power is automatically shut-off.

Easy Extermination

Whether a bed bug problem is at an early stage or at an advanced infestation, the ZappBug Room will kill the parasites quickly, safely and thoroughly. The ZappBug Room will end the anxiety and embarrassment from an infestation. Worries about unsightly welts from bed bug bites will be over.

In a commercial setting the ZappBug Room is the perfect solution. It can be transported to a site and within minutes the system is at work getting rid of bed bugs, moths, carpet beetles and other pest without hazardous sprays, powders or other environmentally unsafe processes. Customers and staff members will appreciate the safe, secure treatment without the use of chemicals.

• Medium size: Measures 39.5 inches-by-39.5 inches-by-28
• Extremely easy to use: Set up, load with items and switch on.
• One person setup and folds flat for easy storage.

User questions & answers

Question:	Are the heaters compatible with 220v adapter
Answer:	The XPOWER X-35AR axial fan is designed for high temperature work environments up to 180 degrees Fahrenheit.
Question:	Do you have to bag your stuff inside the ZappBug oven? Or are the zippers bugproof? The Thermal Strike makes you bag your stuff, it's a pain
Answer:	These units do not heat. For air circulation with heaters.
Question:	Is running the oven noisy an obnoxious? I have a small apartment and wondering if I need to leave while it's on
Answer:	This requires 115V.
Question:	So what exactly are the power requirements for this thing? That is, amps for each motor
Answer:	This unit has a variable speed control. It is 350 CFM on the lowest speed.

Product features

Features

The ZappBug Oven 2 is a non-toxic, natural, and environmentally safe way to kill 100% of bed bugs in all life-cycle stages – eggs, nymphs, and adults.

Thermal Units

The ZappBug Oven 2 includes two 120-volt, 1500-watt thermal units. Each requires an independent 120-volt circuit to operate.

Each thermal unit includes a timer that you can set. Once the set time is complete, the unit will shut-off.

The thermometer and wireless sensor (included) will allow monitoring of the temperature inside items within the unit. The battery-powered wireless probe sends the temperature reading to the thermometer base station. Once a sustained temperature of 120 degrees Fahrenheit is reached, bed bugs will die within minutes.

When placing items in the ZappBug Oven 2, it is essential to allow 6-to-12 inches of space between your items and each thermal unit. If the vent is blocked, a warning light and beeper will indicate the unit is beginning to overheat, and the thermal unit will automatically shut down. If the warning light is on, remove any items blocking airflow from around the thermal unit and allow 20 minutes for to cool before restarting the treatment.

Best Practices

Airflow is the key to eradication success. Leave at least 2 inches of space around items for hot air to circulate. All items need to be placed on the included blocks and/or support net to allow airflow around the bottoms, tops, and sides of items.

It is best to place the ZappBug Oven 2 on a carpet, area rug, or blanket during treatment. Hardwood flooring, linoleum, or concrete will absorb heat from the unit during the treatment. Placing the Oven 2 on a carpet, thick blankets, towels, foam pads, or even cardboard will provide the necessary insulation for effective operation during the thermal treatment.

It is best to load the ZappBug Oven 2 more often with small to medium-sized loads. Large loads take longer periods of time to heat the items and are less efficient.

Easy Eradication and Prevention

The ZappBug Oven 2 is designed to eliminate current infestations and prevent problems in the future. The ZappBug Oven 2 can kill pests quickly, safely, and thoroughly.

The ZappBug Oven 2 can be easily transported and within minutes setup to eradicating bed bugs, moths, carpet beetles, and other pests without hazardous sprays, powders, or other environmentally unsafe products.

The ZappBug Oven 2 is an effective system used by homeless shelters, nursing homes, hospitals, and thrift stores to keep bed bug threats at bay and prevent re-infestations.

Travelers can quickly heat treats luggage, clothing, and other items and be assured that unwanted pests will not follow them home.

Product description

Powerful greenhouse heater , compact, energy-efficient High ventilation rate up to 460 m³/h. The fan setting. By using the fan setting, all the air in the greenhouse can be circulated even in the summer season. With the window open and the fan on, the greenhouse can be cooled down. Air circulation in the summer is also necessary for the pollination of many flowers and vegetables. Bio Green is a family owned manufacturer for greenhouse heaters since 1984 with a lot of expertise and expirience in the greenhouse heating field.

• Heats up A greenhouse with an area of 120 sqft easily
• Floor-standing greenhouse heater, high airciculation fan agains mold formation on plants
• Heater casing made from Stainless Steel / and paimted steel grills
• IPX4 splash-proofing ideal for use in humid areas such as hobby greenhouses
• 1500 w/ 5118 BTU heating output, 2 years
• Very energy efficient to operate
• Ideal for greenhous, milksheds, garage, workshop

User questions & answers

Question:	The Amazon description states that the digital thermostat is now included. I have ordered this twice and why is thereno digital thermostat in the box
Answer:	Amazon has made alterations to this themselves ... we have adressed this in Vendor Central ... its certainly not correct ...there is a manual Palma and a digital version of Palme that comes with the digital thermostat
Question:	how many amps does this use
Answer:	The information in the product description says that it draws a max of 9.0 amps.
Question:	Is the more powerful bio green phoenix heater sold in the us? if not when might it be
Answer:	Hi there ...our Flagship Phoenix Heater will be availabel end of December beginning of January 19
Question:	I can use this fan in the summer time without the heater on
Answer:	No, fan is “Low” powered - doesn’t really work very well for the hobbit was designed for - I wouldn’t recommend this product.

Product features

Palma 1.5 kW” / 5.120 BTUs Greenhouse heater

Powerful, energy-efficient, compact and safe – Bio Green‘s electronic fan heater, Palma, is a fantastic addition to your greenhouse, with it’s timeless design, stainless steel construction and solid build quality. Adaptable and efficient, the Palma is splash-proof rated to IP X4, and in addition to greenhouse use, it is also safe to use in damper rooms, like garages, basements, storage rooms, outbuildings and workshops – it can even be used as an emergency heater if required.

Ideal Protection Against Cold And Frost

Perfect for smaller greenhouses where space is at a premium, the powerful Palma features 1.5kW of heating power, and can circulate 163 cubic metres per hour, with temperature controlled by a single, easy to use dial. If required, the Palma can also be used to maintain temperatures below 32°F, via the addition of the optional digital thermostat (Palma digital version only) – making it suitable for the cultivation of plants that sprout in the frost.

Heating or ventilation in a snap

Palma ensuring that warm air is circluated quickly and evenly throughout your greenhouse removing any cold air pockets.

Air Movement

Palma Basic supplied with a built in capillary thermostat, or Digital - Palma Digital supplied with an additional electronic digital remote thermostat for instant switching accurate temperature control.

Spraywater proof

The portable, robust Palma meets very stringent safety standards; it has IPX4 protection and is thus splash-proof in all directions.

Thermostatic control (Palma digital version only)

The digital thermostat even allows you to select temperatures in the minus range. Thanks to the heater's temperature accuracy (+/-35.6°F), energy consumption is surprisingly low, saving you money.

• 【Portable Space Heater】BORKA new designed space heater aims to create more convenience. Three-Legged solid wooden stand with rubber makes the space heater more stable. Small enough to put on table, ideal for home patio yard bedroom etc. It’s an ideal gift for winter and Christmas.
• 【PTC Ceramic Heating】Our newly designed heating facility is more stable and more efficient. It come to constant temperature state within 3 seconds. This material can keep a longer lifespan. You can use this eco-friendly space heater for many years.
• 【100% Safe Protection Mechanism】Our portable space heater outer surface is made of flame retardant ABS material. It’s safe even your kids use it. Tip-Over and Overheat protection and automatic safety shut-off system for worry-free use. ETL,FCC certificated
• 【3 Modes Heating】BORKA space heater begins to works only 1-3 seconds without waiting.3 heating modes regulate power consumption,1000W-high heating,500W-low heating, 5W-fan only.
• 【Very Quiet Heater】BORKA portable space heater works less than 45DB. Honeycomb large wind tunnel design,better wind output and reducing noise. Your best choice in the winter for working,reading, sleeping.

User questions & answers

Question:	Is the heater safe to use in the bathroom
Answer:	While it's possible to use 220V adapters with the unit we don't recommend it. If you do use them, make sure that they are highly rated enough that they can handle the power draw of each heater - 1500 Watts. Also make sure they are UL certified, and if possible specifically for high power appliances.
Question:	does it have a handle
Answer:	I don't think I can answer that question with any first hand knowledge since I don't think our problem got to the level where things outside furniture were contaminated. I bought it and used it on clothing and other things just to be as thorough as possible. During the process we saw no evidence that they had gotten into any of the stuff we "cooked" in the "oven." However this is my opinion based on the instructions and my observations.There would be 4 possible ways the bugs could escape during the process.1- The zipper. It's a relatively large metal zipper, 2 actually which can close at either end of the opening or meeting anywhere in between. The closure point is not tight like you see in the better mattress covers. I don't think it can be due to the heavy duty construction of the zipper.2- The 2 heater inlets. Two inlet fabric heat tubes are sewn into the main body. There is tight elastic at the ends of the tubes. You insert the heaters into the tubes, the elastic is supposed to be tight enough to prevent escapes.3- The are screen vents sewn into the main body. The mesh to fine enough to prevent an adult bed bug from getting though it. I don't think even smaller ones could get through the mesh.4- Rips or tears. Obviously if there are any rips or tears in the unit the bugs could escape.With the exceptions of rips or tears I would not be concerned about bugs escaping unless the articles being placed in the ovean are so contaminated the bugs are literally climbing out of the articles as you are handling them. The thing you have to remember is how to use it properly. You are supposed to set up the oven and turn on the heaters before you start putting things in it. Then you have to unload your sealed bags directly over and into the oven opening so that anything alive will fall into the opening. The reason to have the heaters on is that the manufacturer claims the heat will either stun the bugs or cause them to run further into the center away from the incoming heat.We did not bag or containerize anything inside the oven. Clothing and stuff you place on the suspention net, heavy stuff on the blocks. The only exception was small items which we placed in plastic storage boxes for convienence. Some of the boxes warped a little from the heat but they only were worth about a buck or two which is nothing compared to what fighting bed bugs costs.A word of warning. If you have live bugs crawling around your stuff you can generally kill them by liberally spraying them with 97% rubbing alchol or Steri-Fab. But don't use alcohol or Steri-Fab near the heaters when they are on, the heaters can ignite the alcohol or Steri-Fab.As long as your unit is in good shape, properly assembled and you pre-heat it I don't see anything getting out of it alive. Hope this helps.
Question:	Does this space heater have automatic shut-off system
Answer:	It was a bit noisy. I had it in a two-bedroom apartment, in the spare room and it was fine. I don't think I could've handled it in my own room. For me it was the smell, that bothered me the most.
Question:	how long is the cord
Answer:	Hi Barbara,The ZappBug Oven 2 runs on two separate heaters, each of which are 1500W and operate on standard 110V power. The amperage will vary slightly depending on your wiring but it's normally 12.5 amps each. We suggest running each heater on a separate circuit so that you don't pop a breaker and include one extension cord so that you can have one heater plugged in directly beside the unit and the other plugged in to another circuit via the extension cord.

Product features

Very Quiet Working

BORKA space heater works less than 45DB. The Honeycomb large wind tunnel design,better wind output and reducing noise. Our ceramic space heater uses a honeycomb large air duct design to ensure smooth airflow, stable operation and super quiet.

Flame Retardant

Our portable space heater outer surface is made of flame retardant ABS material. It’s safe even your kids use it. Tip-Over and Overheat protection and automatic safety shut-off system is your best guard. 3 heating modals Upgraded electronic heater is designed with 1000W high heat mode, 600W low heat mode or normal natural wind/bring you the proper warmth.

3 Legged Wooden Stands

3-Legged solid wooden stand with rubber makes the space heater more stable. Small enough to put on table, ideal for home patio yard bedroom etc. You can carry it on when you have a camp or you take it to outdoor activities. The fourth gear will be delayed for 10 seconds to shut down. The advantage of this setting is to protect the internal parts and extend the service life of the heater.

How to Use

How to use BORKA space heater

1.Turn on: Press the button on the back

2. 5W cool fan: Press the top gear switch to enter to the first natural fan mode

3. 500W: Press the top gear switch again to enter to the medium temperature hot mode

4. 1000W: Press the top gear switch for the third time to enter to the high-grade temperature hot mode

5. Turn off: Press the button on the back once again

Parameters

Specification

Voltage: 110V

Rated frequency: 60Hz

Rated power: 1000W/500W/5W

Product size: 176*187*206mm

Product weight: 0.89KG/1.97lbs

Package Content

Package Content

1 * Electric heater

1 * Power cord

1 * User's Manuel

2 * Protective foam

3 * Wooden stands

3 * Non-slip rubber mat

Ideal Present

The combination of a mechanical switch and electronic switch is easy to operate and convenient. This is a great facility and present in this winter

Product description

Nobody wants to live with bed bugs — but when "solutions" involve costly and hazardous chemicals or ineffective vacuums, the tradeoff can seem nearly as bad. With the BBHD-PRO7 Heater from Prevsol, bed bug removal becomes easier and more effective than ever. Portable and user-friendly, the BBHD-PRO7 Heater uses heat to quickly and comprehensively eliminate all bed bugs in a room by heating it to a temperature of 140̊F. This temperature is both cool enough to not cause any damage to indoor objects and hot enough to effectively exterminate all nearby bed bugs — even those in hard-to-reach spaces such as wall cracks or floorboards. Unlike insecticides, the BBHD-PRO7 Heater is also chemical-free, making it the clear favorite bed bug killer when environmental-friendliness and the health of those in your space are priorities.

Recent research has found that 7 of the 12 bed bug species are either immune or becoming immune to the chemicals used in treatments. Safety concerns aside, heat has a clear advantage over insecticides in that it is the only 100% effective bed bug treatment on the market today. The BBHD-PRO 7 Heater is also available at a fraction of the price of professional insecticide treatments, and it gets the job done in a fraction of the time. Simply place this bed bug heater in a space, go about with your day, and come back after 6-8 hours to move it to another site.

Designed and manufactured in the USA, the BBHD-PRO 7 Heater heats rooms up to 300 square feet. The package includes:

• BBHD-PRO 7
• 15' 110 Volt Extension Cord
• 25' 110 Volt Extension Cord
• 50' 110 Volt Extension Cords
• High Temperature Fan
• Infrared Temperature Gun
• Instruction Card
• Instructional DVD
• Sprinkler Head Covers

All sales are final, no return policy. Warranty: 12 month full manufacturer warranty; 24 months on the resistors.

• HEAT: THE MOST EFFECTIVE BED BUG TREATMENT. Insecticides don't always get the job done — and worse, they're harmful. Bed bugs die at 111̊F. Their eggs die at 117̊F. The BBHD-PRO 8 Heater heats rooms up to 300 square to 140̊F to ensure comprehensive extermination every time.
• EASY SET UP — GREAT FOR SMALL SPACES. The BBHD-PRO 7 is the first PrevSol bed bug heater that runs on 4 12-amp outlets and a 120-volt circuit. These can be set up in virtually any space with the package's included extension cords.
• MONEY-SAVING AND TIME-SAVING. Insecticide extermination and other professional methods can cost property owners thousands. This bed bug Heater is available at a fraction of the price of these methods and gets the job done between 6-8 hours. Longer with concrete buildings.
• ENVIRONMENTALLY FRIENDLY. Chemical-free and operating at a home and apartment-safe heat temperature of 140̊F, the BBHD-PRO 8 Heater is both environmentally-friendly and property-friendly.
• USA DESIGNED, USA MANUFACTURED. Designed and manufactured in the USA, the BBHD-PRO 8 Heater is rated for superior quality and performance.

Product description

The TPI Corporation HF686TC fan forced portable heater is a 680 series heater that has a forced air fan that distributes and circulates heat through a room, providing temperature rise to 75 degrees F. The steel housing is powder-coated for resistance to corrosion and has a handle for portability, as well as a swivel base for mounting to a wall, floor, or ceiling. The finned tubular steel heating element helps draw air flow and discharge heat, and the fan moves air at 262 cubic feet per minute, with an air throw distance of 10’. The heater includes a thermostat for adjustable temperature control from 35 to 85 degrees F, as well as an internal manual reset thermal cutout switch for overheat protection. The single-phase wiring operates on either a 240V circuit at 5.6kW, or a 208V circuit at 4.2kW. The unit weighs 20 lb., includes a 6’ power cord with a molded NEMA plug, and is compliant to standards for use in the United States and Canada by United Laboratories (UL).

Electric heaters generate warmth through a central heating element that is housed in a reflective enclosure that concentrates the energy produced. An element made of a combination of metals produces heat or infrared energy by the electrical resistance created when an electric current passes through it. Fan-forced heaters pass air over the heating element to expel heat from the enclosure for greater throw and circulation. Radiant heaters do not use a fan, but warm nearby objects through energy transfer. A heater’s voltage and wiring should be matched to the electrical circuit where it is to be used. Heaters are used in a range of commercial applications that include shop floors, construction sites, and industrial buildings. All local electrical codes should be followed when installing permanent mounted electric heating equipment.

TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.

• Forced Fan Heater: durable heating equipment features internal manual reset thermal cut-out. Ideal heating accessory for small rooms. Ensures effective spot heating, area heating and freeze protection. 5600/4200 W, 240/208V. Provides even distribution of heat from floor till ceiling
• Lightweight Heating Equipment: corded-electric power source is a travel friendly heater. The portable heating accessory has a compact structure and can be used in low traffic areas like workshops, garages. Features 10FT air throw
• Reliable Portable Heater: easy DIY installation flexibility. Shockproof fan heater. Corrosion resistant and moisture proof, space heater features swivel base and is ideal for winter season and colder areas.
• High Performance Heating Appliance: electric appliance can be used as air circulator, drier or heater. The indoor electric heater is certified. The heating appliance features temperature control thermostat for achieving the desired warmth and comfort
• Care Tip: the low maintenance heating accessory can be used to remove loose dust with microfiber cloth. Wait for the heater to cool before cleaning. Wipe with damp cloth. Do not use any detergents or cleaners.Amps high:23.4

User questions & answers

Question:	What is a manual thermal reset cutout and how does it work
Answer:	1.7 oz
Question:	I'm looking for an adaptor i can use to plug this unit into my generator...does tpi sell adaptors
Answer:	Well, it sure looks like the real deal. It’s in an original Aveda bottle and came unopened. It seems to work just like the real stuff. It’s either genuine or a very good imitation.....
Question:	Is there a reset? When in off position the light is red. When thermostat is set above temp I can hear it click, but the heater won’t turn on
Answer:	You have to go on Aveda site. Undo not use product anymore
Question:	How long is the power cord to this unit
Answer:	It a plastic.

Product features

TPI Corporation 680 Series

The 680 Series Portable Unit Heaters are great for indoor residential, commercial & industrial areas. It offers quick and powerful heating action in a compact size. Rotational mounting bracket for multiple mounting configurations: floor mount, ceiling mount, or wall mount. Ideal for small rooms and work areas. Can be used in workshops, garages, basements, warehouses, sheds, construction sites and more.

Workshop Areas

Construction Sites

Garages and Body Shops

About TPI Corporation

For over 70 years, TPI Corporation has been known as America's Comfort Conditioning Company. TPI Corporation is a manufacturer of electric heat equipment, ventilation products, task lighting equipment, process heat ovens, and custom thermostatic controls. TPI Corporation is a privately held organization, based in the United States, and provides innovative and high quality products manufactured under the brand names such as Markel, Fostoria, Raywall, TPI Industrial, TPI Commercial, HotPod, and Columbus Electric. So, if you have a need in the industrial, commercial, or residential marketplace – TPI is here to help.