12 best pocket holsters

Product description

UTG Professional Ambidextrous Open Top Pocket Holster for Sub Compact 9mm / .40 Autos, Ruger LCR or Similar, with Non-Slip Bands, Ultimate Pistol Protection and Side Pocket for Certificate, License, Cash or Cards, 3.9-Inch x 5.6-Inch in Size

• Ambidextrous design
• Front and back pocket storage
• Non slip bands retain holster in your pocket with gun is drawn
• UTG Professional Ambidextrous Open Top Pocket Holster for Sub Compact 9mm / .40 Autos, Ruger LCR or Similar
• with Non-Slip Bands, Ultimate Pistol Protection and Side Pocket for Certificate, License, Cash or Cards
• 3.9'' X 5.6'' in Size

User questions & answers

Question:	Will this one work for my new glock 42 .380? someone has already said it's a bit too slack? so guys! which one do i order for my little glock
Answer:	Not sure but I have the Ruger LCP .380 in mine and it fits pretty good. Hope this helps
Question:	Will it fit a s&w shield 9 with a tlr
Answer:	I use this for a LC380. My glock 26 won't fit. If that helps
Question:	will is fit a ruger lcr with lasermax
Answer:	It fits my Ruger LCR .357 with a LaserMax laser attached just fine. The .357 has the same dimensions as a .38. This holster fits either one perfectly with or without a LaserMax attached. See my review with photos dated 12/2/2016.
Question:	Will it work with a glock
Answer:	No. Your trigger guard will be exposed. Glock 26 &27, yes. These will fit J frame revolvers and 'sub' compact semi-automatics. The exception would be the Ruger SP101 2.25" barrel which I do NOT put into the catagory of J frame but it works well in it. That combo is used in my car. Walther PPS, Glock 43 and similar sized subcompact semi's.. YES it fits. Stay safe.

Product description

THE Protector Premium Pocket Holster for Concealed Carry

A high quality Football Leather type material holster that won't break the bank!

- Durable material that grips your pocket so the holster stays in your pocket when you draw your firearm.

- Fits comfortably in your pocket and hides the outline of your gun.

- Compatible with most subcompact 380 pistols.

• MADE FROM HIGH QUALITY MATERIALS - We use quality materials for the outside as well as the inside of this holster. The outside material is designed to stock to your pocket while the inside material of the holster is slick and allows for a smooth draw.
• COMPATIBLE WITH MOST 380 AUTO PISTOLS - Compatible with Glock 42, Ruger LCP, S&W Bodyguard, Sig Sauer P238, Taurus 738, and Many More. Note: DOES NOT FIT Glock 43, Ruger LC380, and other larger frame 380's.
• COMFORTABLE CONCEALED CARRY - Carrying a firearm can be uncomfortable, especially in the middle of those hot summer months. Pocket carry can sometimes be the only way to comfortably carry a firearm, and The Protector Premium Pocket Holster doesn't disappoint.
• FAST SMOOTH DRAW - We designed the inside of this holster with material specifically chosen because it is "slick" allowing you to draw your pistol in one smooth motion so your holster won't come out when you draw your gun.
• OUR PROMISE – We stand by and believe in our products! If you have any problems, contact us and we will offer you a full refund or replacement!

User questions & answers

Question:	Can it be used iw
Answer:	Hello this is Joe from ComfortTac. This holster does not have a clip or any way to "hold" IWB besides friction. If you wear tight fitting pants it may hold but the grip material on the holster may not be comfortable against your skin.
Question:	Where is this shipped from please
Answer:	No. My keltec without laser is snug
Question:	Will the Sig Sauer P365 fit well into this pocket holster
Answer:	I don't own a p365 but I don't think they will fit the p365 is a lot larger than the spectrum
Question:	will a taurus spectrum .380 work with this holster
Answer:	yes

• LIGHTWEIGHT & COMFORTABLE - Made of lightweight neoprene for comfortable concealed carry. The neoprene is covered in a suede like material inside and out to provide protection for your gun while the exterior lining of the holster grips the inside of your pocket to ensure your holster stays in your pocket when you draw your gun.
• COMPATIBLE WITH MOST COMPACT AUTO PISTOLS - The holster measures 6" tall by 4" wide to be compatible with a wide range of compact pistols. Will be compatible with guns with a maximum overall length of up to 6.5" and a width (top of slide to bottom of trigger guard) of 2.625". It is compatible with popular guns like the Glock 42,43,36,27,39,28,33, S&W M&P Shield, KelTec PF9, Taurus PT709 & 704, Ruger LC9s, Bersa Thunder, and More.
• AMBIDEXTROUS - Carry in right or left pocket and draw with right or left hand. You can even carry in your back pocket if you prefer.
• FAST SMOOTH DRAW - The suede like lining provides a smooth draw while the suede like exterior grabs the pocket to ensure the holster says in your pocket when you draw. A rubber strap also helps keep the holster in your pocket when drawing your gun.
• OUR PROMISE – We stand by and believe in our products! If you have any problems, contact us and we will offer you a full refund or replacement!

User questions & answers

Question:	Does it work for a taurus pt22 poli 22lr? i'm looking to use it in my purse to keep the safety engaged
Answer:	It fits my SCCY CPX-2 PERFECTLY
Question:	Which size would fit a DB9 Gen
Answer:	NOT the very small one .
Question:	Holster for sw
Answer:	I do not know. It fits my .25 caliber Phoenix 10 round semi- auto perfectly.
Question:	Am i assuming correctly in that i should get the “compact” size for my springfield hellcat
Answer:	I don't know much about your Hellcat. I know this Comfort Tac M fits my Sig P938 with an armalaser nicely. My Sccy with its Armalaser will not go completely in the Comfort Tac M. I feel but not 1000% sure my Sccy would fit if I removed the Armalase. If you look up the dimensions of my 2 handguns and yours I'm sure you can make a conclusion.

Product description

The Nemesis has revolutionized pocket holsters. This pocket holster absolutely will not move out of position in your pocket. The inside is made of a slick pack cloth for a no-friction draw, and the core has just the right amount of foam to break up the outline of the gun. Ambidextrous. Made in USA.

• Model: Nemesis
• Pocket Holster
• Fits S and W J-Frame/Bodyguard .38 Special/Taurus 85 2-Inch
• Ambidextrous
• Black Cloth

User questions & answers

Question:	I see one comment about fit (being too generous) for a S&W Airweight 642/442. Am looking for any further thoughts on this. Thanks
Answer:	This is very small. VERY SMALL! I do not recommend for anyone over 3 years old
Question:	Will this fit the S&W .38-calibre Bodyguard revolver (with laser
Answer:	Yes, they are green. Please let us know of you have any additional questions.
Question:	Will it fit a smithwesson 642 revolver
Answer:	The wheel is made of strong rubber.
Question:	Does this holster have an opening at the bottom where the muzzle will be exposed? My only concern is pocket lint and other junk getting in my muzzle
Answer:	The tub is also made of metal. We hope this information is helpful, please let us know if you have any additional questions. Thanks!

Product description

A Better Means of Concealment; Better Protection for Gun and Clothing. Lessens print-through and recognition of gun carried inside pants or jacket pocket. Open-top holster prevents movement of gun levers, buttons or catches common to loose pocket carry.

• Quality materials used for all Uncle Mike's products
• 100% designed and tested for the toughest situations and environments
• Whether you are a professional, recreational user, or even casual, Uncle Mike's will fit the mold for all types of people
• Better protection for gun and clothing
• Laminate lessens print-through and recognition of gun, cushions your leg and blocks perspiration
• Open-top holster provides grip-up positioning and prevents movement of gun levers, buttons or catches common to loose pocket carry
• Non-slip band retains holster in pocket when gun is drawn

User questions & answers

Question:	What size should I order for my S&W bodygard
Answer:	I got the number 2. Number 2 I believe I read should fit your 380. I bought no. 2 for my S&W M&P shield. Fits great easy to pull weapon out of pants pocket without pulling holster with it.
Question:	What size should i choose for bodyguard 380 (no laser)? thanks
Answer:	Definitely the size 3. I went by the description and ordered the size 2, which said for most .380s, but it is too small. (And my Bodyguard 380 does not have the laser.) The BG won't go in very far in the size 2, and even then the holster fits so tightly it comes out with the firearm when you draw. The size 3 works and fits just a little loosely and long on my BG. If I insert the gun as far as it will go, the rear sight is covered and there's not enough grip outside. But if I only insert it just up to the front of the rear sight, it works well and stays in my pocket when I draw the firearm. I went to the Uncle Mike's website, and they don't even list a pocket holster for the Bodyguard 380, perhaps because neither size fits perfectly. The size 3 works, though. (I'm considering getting a Remora holster for it, too, if I ever decide to carry it more often. The Remora will work inside a waistband, no belt needed, or in a pocket. It has a grippy texture on the outside. I have one for my M&P Shield 9mm. They cost around $25 on the Remora website, and are made to the exact size of each gun.)
Question:	What size do I need for a Smith and Wesson M&P Shield 9mm
Answer:	There's a chart to look at when you look at the holster at the left
Question:	What size for a sig P
Answer:	Directly from the Uncle Mike's web site:SizeRight/Left Product Number Fit Information1 87441 Small autos (.22 - .25 cal.)2 87442 Most .380s3 87443 5-shot revolvers; Sigma .380>4 87444 Most sub-compact 9mm/.40 autos

Product description

The Bianchi 152 Pocket Piece Pocket Holster is the perfect option for those looking to carry off the belt. The full grain leather construction of the 152 breaks up the outline of the pistol when carried. The rough out leather design helps keep the holster in place during the draw stroke-further assisted by two pocket hooks which further lock the holster in place.

• Full grain leather interior for smooth draw, suede exterior to stay in pocket
• Dual rear and front pocket hooks for enhanced security
• Vertical assist raised back for smooth draw and comfort
• Will Fit Chart # 25200
• Full grain leather interior for a smooth draw
• Vertical Assist finger pad for facilitating draw from pocket
• Designed with dual molded pocket hooks to help prevent holster movement when drawing
• Leather is rough side out to cling to pocket interior

User questions & answers

Question:	Will this fit a 640 pro with night sights
Answer:	I bought it for my 3 year old grandson. It is a little big for him. it is very sturdy and well made.
Question:	Will this fit a taurus 605 stainless steel
Answer:	Yes
Question:	Does this fit a kimber k6s
Answer:	We bought it for our grandson when he was less than 40 inches tall. I think it would be too small for a child close to 4 feet tall
Question:	This is noted as “left hand orientation “. How do you go about getting a right hand version
Answer:	it definitely for children I didn't have all the screws with mine so ended up going to hardware store .. would recommend putting a heavier coat of shellac or polyurethane on handles to prevent wear cute wheelbarrow

Product description

This will revolutionize pocket holsters. Never before has there been a material this viscous. This pocket holster will absolutely not move out of position in your front pocket. The inside is made of a slick pack Cloth for a low friction draw, and the core is just the right amount of foam to break up the outline of the gun. Available in black.

• Fits Glock 43
• Ambidextrous
• black in color
• Sports product

User questions & answers

Question:	Will it work with a hellcat
Answer:	I have a BodyGuard 38 which is very similar to a 642/442 in size/shape and am very pleased with the Nemesis. Works perfectly for front or rear pocket carry as well as IWB appendix carry.
Question:	Will this holster for a 642 revolver
Answer:	It is a pocket holster and it will fit the .38 Bodyguard revolver, that is what I use.
Question:	Anyone using this for their 43X? How do you like it? Thank you
Answer:	Yes that's the gun I have and it fits nicely
Question:	what are the dimensions
Answer:	It is open (not stitched) but does not gape open. In my picket the bottom stays closed as the material is fairly stiff and my LCP doesn't extend below the bottom edge. I get no trash, lint etc in my muzzle.

• What's a Sticky Holster?: The outside skin is a super non-slip material that, with a little pressure, adheres to just about anything.
• MD-4 Medium: Suitable for Single Stack Sub-compact Medium Autos up to 3.6” barrel. Fits right and left-handed users.
• Perfect for Waistbands or Pockets: They can be used in sweatpants, yoga pants, jeans, and everything without a belt.
• No More Loops or Clips: Sticky Holsters don’t come with clips or loops to secure it, as the outer “sticky” skin is specially created to adhere to your waistband, undergarments or your skin.
• Quality AMERICAN Craftsmanship: Sticky Holsters Inc. stands by the quality of our holsters and accessories, 100% Made In The USA.

User questions & answers

Question:	I ordered 2 holsters and 1 mag pouch. I only recieved 1 mag pouch. No paperwork, nothing about a backorder? What gives
Answer:	I don't know but it fits my S&W Bodyguard, perfectly. It has a built in laser and is .38 Special. I'm not familiar with a 640 Pro with night sights.
Question:	will this fit the g5 glock45 9mm
Answer:	I believe so. I am using it for a S&W 37 It is a 5 shot 38 special and it doesn’t fit tight
Question:	How's the fit on a Ruger sr40c
Answer:	I do not own a Kimber. I do know that this holster will accept any one of several 5 shot 2 inch .38's. Compare the cylinder diameter at any gun store that carries 2 inch 5 shot .38. By-the way, this is an excellent holster in terms of maintaining the piece in an available posture, excellent retention for both the piece and the holster "in the pocket".
Question:	How do you clean the holster
Answer:	Mine was for a right hand pocket version

Product description

Black Scorpion Outdoor Gear Pocket Holster Ambidextrous W3, Black, Fit Gun Ruger LC9S. Sig P365 Most 380 Autos, HC13-IWB05-BSGPNW3-BKRH

• Lightweight & Comfortable - Made of neoprene for comfortable and safe concealed carry. The pocket holster offers a non-slip band that prevents the holster from flying out when drawing the handgun from your pocket. The pocket holster also features a front and back pocket for document storage.
• Suitable for the Sig P365, 3.1'' BBL and similar handguns
• Ambidextrous - Carry in your left or right pocket and draw with either hand.
• Fast Smooth Draw - The soft nylon inside of the pocket holster provides a smooth draw while the rubber band grabs sticks to the pocket to ensure that the holster stays in your place when drawing your handgun.
• Black Scorpion Gear is an industry leading competition and concealment manufacturer, catering to enthusiasts and professionals around the world. Your satisfaction is our priority. All of our products come with a Lifetime Warranty. If you're not completely satisfied with our product, please contact us so we can make arrangements on returning your purchase.

User questions & answers

Question:	does a Taurus spectrum fit
Answer:	I think most of the .380 auto small handguns will fit this case very well.
Question:	For a bersa thunder 380 cc, will a size 2 or 3 fit better
Answer:	This should fit about any 380 caliber pistol. If you are still unsure, call the manufacturer.

• WHAT'S A STICKY HOLSTER: We have developed special holsters into a modular system, where you can use it IWB, in the pocket, on your ankle, etc. The outside skin is a super non-slip material that, with a little pressure, adheres to just about anything.
• MD-1 MEDIUM: The MD-1 is Suitable for small 9MM’s - Med/Sm autos such as Smith and Wesson Sigma, Ruger LC9, Glock42 and other makes and models with frame size up to 3. 5" barrel. Ambidextrous fit for right and left-handed users.
• tick Holsters MD-1
• NO MORE CLIPS OR LOOPS: Sticky Holsters don’t come with clips or loops to secure it in place, as the outer “sticky” skin is specially created to adhere to your waistband, undergarments, or your skin.
• QUALITY AMERICAN CRAFTSMANSHIP: Sticky Holsters stands by the quality of our holsters and accessories, 100% Made In The USA.

User questions & answers

Question:	I have a phoenix arms hp-22, is this the right size
Answer:	Yes. I use it for my glock 43 and it fits nice, but have squeezed my glock 26 in as well, lol. The hellcat is about the same size as the 43, so should be perfect.
Question:	Will this fit a Glock
Answer:	Not likely. This particular holster is a pocket holster.
Question:	Will this work with a SCCY CPX
Answer:	I use it for my 43...I assume the X would stick out a little more since the grip is longer. However, dont think it would be too bad. I love this holster for pocket carry and would recommend for any bag use (my wife carries hers in a bag around her body).
Question:	Anyone have a lc9 that uses this? Wondering how it'll fit. Thanks
Answer:	Grayson the holster measures 5"x5" and fits nice in my back Jean pocket.

Product description

The nemesis has revolutionized pocket holsters. This pocket holster absolutely will not move out of position in your pocket. The inside is made of a slick pack cloth for a no-friction draw, and the core has just the right amount of foam to break up the outline of the gun. Ambidextrous. Made in USA.

• Pocket Holster
• Designed To Stay In Place In Front Pocket
• Features A Low Friction Draw
• Country Of Origin: China

User questions & answers

Question:	Will this fit the smith and wesson m&p9 shield m
Answer:	Contact the product site I have no idea
Question:	i have a walters TPH 22 what holster will fit
Answer:	I Have a Glock 19 Gen 5 & 45 Gen 5 every holster I’ve bought for my 19 will fit the 45 they have the exact same slide the 45 WILL NOT fit holsters designed for a 17 length slide
Question:	will this holster work for the springfield hellcat
Answer:	Hello, the Ruger SR40c does fit the MD-4 holster. Please feel free to order. Thanks for the question.
Question:	model number is same as the nemesis for teh Springfield XDs 45 according to DeSantis website. Does this indeeed fit the XDs
Answer:	Hello J.M. The best way to clean you holster is to use a rag or wash cloth. Wet the rag and put a small amount of mild detergent (we use Murphy's Oil Soap) on the rag and ring out so it is damp. Simply wipe down the holster and let it air dry overnight. This will help clean off any body oils and dirt and it will retain its stickiness again. Thanks for question

Product description

The Trickster conceals your small automatic in the back pocket of those slick fitting slacks. It is simple, smart and very effective.  Available in black unlined leather.

• Conceals small automatic weapon
• Holster for back pocket
• Dimensions: 5 1/4" x 4"
• Country Of Origin : United States

User questions & answers

Question:	Will this fit a bodyguard 380 with laser
Answer:	Go to the sticky holster website. They have a size chart for pistols
Question:	Appears to be for the left pocket, do you have one for right pocket
Answer:	I have an MD-4 and a MD-1. I use my MD-1 100% of the time. And my 43 fits perfectly in the MD-1 in my Gunbunker GS-1.
Question:	If used in the rear pocket wouldn't it be for a left-hand draw? If it was placed in right rear much of gun wouldn't be concealed or be backwards
Answer:	You need the md1 for sccy cpx2 that is the gun I carry that is the holster that I have it is very awesome holster
Question:	Would this work for a Kimber Micro
Answer:	Using it with my LC9s everyday. It fits great and it doesn't move around like I thought it would. I like it better than my kydex holster with the belt clip.