14 best aluminum boats

• Perfect for 4 adults to enjoy a fun summer of boating
• Designed with heavy duty, puncture resistant PVC for comfort and durability
• Contains three air chambers including an inner auxiliary chamber inside the main hull for extra safety
• Inflatable cushions are included for comfort and seating stability; U.S. Coast Guard I.D. - NMMA Certified, TUV approved
• Fishing and relaxing have never been easier with the two built-in fishing rod holders and gear pouch
• Motor mount fittings are included for the flexibility of adding the Intex motor bracket and trolling motor
• A grab handle on the bow and an all-around grab line are provided for your convenience, as well as welded oar locks and oar holders, a U.S. Coast Guard I.D., and a repair patch kit

User questions & answers

Question:	Can I take my 70 pound lab mix on it
Answer:	Yes! They are the best rod holders for catfish I have ever used.
Question:	can you get your dog in the boat she is 55 pounds
Answer:	No it is rusting. Screws were to short though. I had to buy longer ones.
Question:	Intex challenger vs intex seahawk comparison
Answer:	no
Question:	why does the boat rotate instead of moving forward
Answer:	Driver, passenger, front casting deck, rear casting deck !!

• 3 air chambers including an auxiliary air chamber in hull for extra buoyancy
• Boston valve on two main hull chambers for quick-fill & fast-deflate. All around grab line
• Inflatable I Beam floor for comfort and rigidity. Has 2 welded oar locks on each side
• Motor Mount Fitting. Hi Output Manual Hand Pump. 54 inch deluxe aluminum oars. Item is 144.09 long x 66.14 wide in inches
• Boston valve on two main hull chambers for quick fill & fast deflate. Do not inflate in 30 minutes after patching
• 3 air chambers including an auxiliary air chamber in hull for extra buoyancy
• Boston valve on two main hull chambers for quick fill & fast deflate

User questions & answers

Question:	how much weight does it hold (people
Answer:	Designated for 800 pounds or 4 people. It can actually squeeze in 6 people...
Question:	Can one person row the boat on his/her own
Answer:	It's possible, but not easy. Took me about 15 minutes to row 1/4 mile with 550lbs on the boat.
Question:	rock
Answer:	Dwayne Douglas Johnson, also known as The Rock, was born on May 2, 1972 in Hayward, California, to Ata Johnson (born Feagaimaleata Fitisemanu Maivia) and Canadian-born professional wrestler Rocky Johnson (born Wayde Douglas Bowles). His father is black (of Black Nova Scotian descent), and his mother is of Samoan background (her own father was Peter Fanene Maivia, also a professional wrestler). While growing up, Dwayne traveled around a lot with his parents and watched his father perform in the ring. During his high school years, Dwayne began playing football and he soon received a full scholarship from the University of Miami, where he had tremendous success as a football player. In 1995, Dwayne suffered a back injury which cost him a place in the NFL. He then signed a three-year deal with the Canadian League but left after a year to pursue a career in wrestling.
Question:	Does boat come with the girls in the picture
Answer:	You mean Do girls come with the boat in the picture? I am sure Amazon is not selling girls, at least not that I know of.

Product description

z

• Gluvit barrier coat seals and protects hulls and decks
• Provides superior protection for fiberglass, wood, aluminum, and steel
• Seals leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks
• Hard protective coating flexes with hull movements to bridge and seal hairline cracks
• Fills minor cracks and pinholes
• Note:Epoxy Sealer” is 1.8 pounds. and the Gluvit Catalyst” is .268 pounds.

User questions & answers

Question:	ccan you hrush on gluvit over your entire boat, including bottom and sides
Answer:	Yes it has to be mixed. The small bottle is the hardener, you will have a period of time to work with it before it hardens.
Question:	Can it be used on the bottom side of my boat
Answer:	Depends on ur thickness u put but it cover a 16ft john boat the bottom transum and other spots
Question:	Does it have to be mixed together
Answer:	Hi KCLC, I'm afraid the wooden handle will burn in the oven. May I know why you would like to use it in the oven? Warm Regards, Daphne The Mammafong Family
Question:	How much will it cover? Thanks
Answer:	Yes it has a finish on it....it’s just not bare wood.....very, very nice lid.

Product features

Marine-Tex RM330K Gluvit Waterproof Epoxy Sealer

Description:

Gluvit barrier coat seals and protects hulls and decks. Provides superior protection for fiberglass, wood, aluminum, and steel. Seals leaky seams and rivets in aluminum hulls, and leaks around fiberglass cabins or decks. Hard protective coating flexes with hull movements to bridge and seal hairline cracks. Gluvit fills minor cracks and pinholes. Its long working time allows penetration into cracks to seal and strengthen. Acts as a barrier coat to minimize water absorption and galvanic corrosion. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking and molding.

On wooden hulls, Gluvit seals and protects planks and sheeting against water absorption and damage from marine parasites. On aluminum hulls, Gluvit seals seams and rivets and acts as a barrier coat to minimize galvanic corrosion. On jet skis, rowboats and canoes, Gluvit provides abrasion resistance to protect hull sides and bottoms from damage by grounding on beaches or rocks.

For maximum ultraviolet protection, Gluvit must be painted after full cure. Gluvit can be overcoated with any marine paint or other coating compatible with epoxies. Check with your paint supplier and make sure the coating you are using is epoxy friendly and suitable for your application.

Product description

Instructions

1). These wheels have 2+1 adjustment positions for length base on the wheel arm end rotation position upper or lower. to remove the leg assembly from the bracket, simply push the stainless steel locking button and then the rotation button to release.

2). The wheels must face towards the boat tubes and be as far apart as possible (this will give you more stability when moving the boat around) and clear the boat tubes by about one inch so they don't rub against the tubes when being raised or lowered. the wheels must also clear the bottom of the boat by about one inch when placed in their lowered position.

3). Once you have determined the mounting positions for the brackets which should be straight up and down on the transom and about 6-8 inches up from the bottom of the bracket to the bottom of the boat, mark where to drill the 5/16” holes (drill bit not included). This is best done by separating the leg assembly from the bracket. double check everything again before drilling any holes! holes and transom must be vertical.

4. Use the supplied washers and lock nuts on the bolts on the inside of the transom to secure the brackets to the transom and then cap them with the supplied acorn nuts to protect your boat when rolled up.

www.seamaxcanada.com 1877-907-7766

• Seamax Easy Load Boat Launching Wheels Set is designed by Seamax Canada, made by hardest marine grade T6 aluminum alloy with CNC processing; Shiny looking anodized coating on all aluminum parts, product is good for saltwater using; Small parts are all made by solid stainless steel. Lab 1000Lbs tested, support MAX 500Lbs loading in all condition, good for inflatable boats, aluminum boats and fiberglass boats.
• This system is designed for boats with transom, the length of the boat should not exceed16 FT & total weight within 500 Lbs. These transom wheels should only be installed by an adult with some experience in working with tools. To install the wheel set properly, you will need to drill 4 holes (5/16”) in the transom for the mounting. Addition reinforcement may be required on some aluminum transom. And you can use marine sealant and suggested Sikaflex 291.
• Benefit from its new Push Button design & max 3 stages wheel arm, the system can be adjusted while afloat in the boat leaving or coming into, it can also bring different performance position for boat launching. The wheel arm length increment is 2.5” per stage, plus the wheel’s diameter, the range of length is 22-28 inches.
• Tire inflation: Dolly tires may not be fully inflated when shipping; please only give 15-20 PSI pressure at room temperature before using. Best to use portable type digital air pump in case tire over inflated. Tire over inflated will cause damage and the warranty is not covered. Dual wheel kit is available for this dolly for heavy loading application.
• Maintenance: Wash it after using from salt water or sandy beach. Check tire pressure before every using. Don’t store the wheels under the sun or beside the heat to maximize its life time. Take the wheel arm off from the transom bracket when store your boat. Lube the spring load dolly system is necessary. Keep the lock pin on the dolly bracket. Manufacturer 2 years Parts Limited Warranty within USA & Canada. 30 days free replacement on any defective ransom wheel sets.

User questions & answers

Question:	I have a pelican predator 103. i've noticed the transom is not as wide as the inflatable boats. i'm wondering if these would work for my boat
Answer:	My suggestion, a floor - although a good option - has two drawbacks. Make it a little harder to deploy and pack, and there is no protection if the dog scratches the side. What I use are these rubber dog boots. Your dog can use any unprotected rubber raft, protects their feet, rubber so it not slippery even on wood or tile, etc. Two notes: 1) do NOT get a perfect size, get one size larger. They need to be a little floppy because it is more comfortable for the dog and it is easier to put on and take off if you are a single person. If you are goign to use them for a bit of snow protection then you want them snug because lateral movement on the ground may make them come off. In either case it is easier to put them on using two people especially if the dog has long hair, one holding a wide hole, the other navigating the paw. Clearly worth it and far more versatile and helps non slip even on surfboards. http://www.amazon.com/Pawz-Water-Proof-Boot-Small-2-Inch/dp/B001J22876/ref=sr_1_sc_1?ie=UTF8&qid=1435465163&sr=8-1-spell&keywords=dog+fubber+boots
Question:	Can the wheels be removed for storage, and do they interfere with motor movements
Answer:	Hi; I have a 55-60 lb. dog and getting her in is no problem. What I find helpful tho is putting a tarp or cutting an air mattress the length of the boat. The added protection helps keep toenail pokes and scratches from getting to the raft itself.
Question:	Will this fit a sea eagle foldcat
Answer:	Let me tell you something, the Seahawk 2 was the best thing that has ever happened to me. They pointed and laughed and said it would never make it down the green river. I showed them. At the end of it all I sang the star spangled banner with all of the patriotism I have. Just buy it dude.
Question:	can you add the extra wheels to these like you can on the delux modle
Answer:	must be coriolis Force. try boating on equator.

Product description

The Classic Accessories StormProTM is the Heavy-duty boat cover designed for both long-term storage and highway travel. The high strength StormProTM Marine Canvas has been engineered for extra durability and all-weather protection that is extremely strong and protects your boat from UV damage, dirt, and any type of weather that might damage your investment. The full cut given to the cover allows extra room for accessories such as bow rails, running lights, etc... The elastic cord sewn into the bottom hem, and the dual rear air vents designed to reduce moisture and ballooning, give the cover a tight, custom fit. An integrated buckle and strap system provides easy fitting while trailering your boat, and adjustable straps snap into quick-release buckles on the cover. Our advanced fabric coating technology and heavy-duty fabric give you the maximum in water resistance and repellency. The included support pole provides additional structure to the cover, preventing water from pooling and helps to preserve the life of the cover. A heavy-duty storage bag and trailering straps are also included with the cover.

• For smaller utility and fishing boats 12' 14' long, up to 68 inch beam width
• Heavy duty 600D boat cover designed for both long term storage and highway travel
• Integrated buckle and strap System for easy fitting and trailering, adjustable straps snap into quick release buckles on the cover
• Includes stuff sack storage bag, cover support pole to prevent water pooling, and trailering straps
• Five year limited Warranty

User questions & answers

Question:	Will any of these fit a 1973 classic Boston whaler 13 ft
Answer:	I've had mine for over 12 years. I have taken it down a lot of class 3 rapids and over rocks. It has an inner bladder which is what inflates. This is an outstanding inflatable for the money. After 12 years, mine has just this year started losing air in one tube. It is a very slow leak and I can still use the boat, but heck for this price, I will be ordering a new one. They are out of stock right now, but I am ordering another one as soon as they are back in stock.
Question:	I have a 19' 2" Vectra sport boat. Im not concerned about the width being an issue, but will it fit since my boat is 2" longer than
Answer:	Open water can be rough with paddles only but I think most fish finders would work. There is plenty of room for mounting. I probably wouldn't put it on the pontoon if you can't pull it up when your moving. Might cause a little to much drag and be hard to go straight. I would mount the sensor on the cage behind you and your screen up front near the rod holder. I've also found you can stand on top of the seat if water is calm enough and you haven't had to many beers yet.
Question:	I have a h17 xpress bass boat, if i want to leave the seats up should i get the 16-18.5 or 17-19 ft
Answer:	First thing I would do is replace the oar locks with Scotty oar locks ( http://www.amazon.com/Scotty-Strongback-Lock-Pair-Pack/dp/B001M4HTCA/ref=sr_1_1?ie=UTF8&qid=1421029285&sr=8-1&keywords=scotty+oar+locks )....no chance of breaking those and loosing an oar. This boat will have no issue with class 2 water and the pontoons are tough enough to slide over rocks in shallow water. However, for class 3 ...I would replace all of the pins that hold the frame together with stainless steel bolts and lock nuts to keep the frame solid. Also for class 3 I would replace the seat with a stronger one...the back of the stock seat will break under class 3 stress. With these mods....you will do well on most waters to the plus side of class 3 easily...just don't take it over a water fall. Always remember, cold air and water will reduce the air pressure in the pontoons that were inflated in a warmer environment. Like wise, pontoons inflated to pressure in cool temps may over pressurize in warm water and a hot sun. Keep an air pump strapped on it at all times for such adjustments. ..... just read the water and go with the flow....enjoy!
Question:	Will it fit my Clackacraft Drift Boat
Answer:	No, it's not difficult. It's time consuming, but what boat isn't when it's time to launch or recover it?. The Colorado Pontoon boat weighs about 75 pounds. The newer models come with a transport wheel. I've had mine since the summer of 2005. It's easy to put together and take apart and, when disassembled, it fits right in with your camping gear in the back of your truck. I often take mine to lakes where I can back my Jeep up to within a few feet of the waters' edge. That way I can inflate, assemble, deflate, disassemble ,and recover it with no problem. I recommend a high volume electric or manual pump for easiest inflation. I personally use an electric , high volume air pump that plugs into the rear power port on my Jeep.

Product features

StormPro Boat Cover

Weather the storm with StormPro, Classic Accessories' heavy-duty boat cover, constructed from a durable polyester fabric for all-weather protection and long-term storage.

Classic Fabric

High-strength polyester fabric provides durability and water resistance and is free of PVC carcinogenic chemicals.

Strapping System

Quick-release buckle and strap system provide for easy fitting.

Elastic Hem

Elastic cord sewn into the bottom hem gives the cover a tight, custom fit.

Support Pole Included

Support pole included to prevent water from pooling and to help preserve the cover.

US-based company with 35+ years of experience

Classic Accessories was born in 1983 in a small basement in Seattle, WA. Our founder started by creating auto accessories like seatbelt pads, steering wheel covers, and fuzzy dice. Over the past three decades, the company has steadily expanded its range of products and distribution. Today, Classic Accessories is the leading manufacturer of high-quality covers, cushions, hammocks, umbrellas, and more. From the backyard to your favorite boat launch, we’ve got you covered.

Our Purpose

We don’t just cover vehicles and equipment – we support your lifestyle. Time outdoors is important, and we want to help you make the most of it. We share your passion for adventures, that’s why we carefully consider all the tiny details that make our products useful, convenient, and practical.

Design Process

Our US-based design team creates products that are easy to use, pleasing to the eye, simple to store, and built to last. We believe it’s all in the details.

We’re all about using high-quality materials and thoughtful features to give you the best experience possible.

Excellent Customer Support

Our customer support team provides you with excellent assistance and product knowledge. We’re committed to helping you with any questions or issues you may have.

Product description

Boat Cover Support Pole

• ADJUSTABLE HEIGHT FOR A PERFECT FIT These boat cover support poles feature an easy-to-use telescoping pole that adjusts to any custom height from 23.5” to 56” to fit your boat perfectly, keeping it protected. Our boat cover support poles holds up boat covers and tarps made from canvas, plastic and more to prevent water from pooling and debris from accumulating. This boat support pole set works great as a pontoon cover support , boat tarp support , boat canvas pole support and boat cover poles.
• COMES W/ MUSHROOM CAP & BUTTON SNAP RUBBER END These boat cover support poles with snap and mushroom cap accommodates various styles of covers. The boat cover support pole caps have slits that accept additional support straps (not included) used to provide extra support in order to stand up to the elements. These versatile support pole for boat cover set can be used as a pontoon boat cover support pole to hold up a pontoon tarp , as pontoon cover poles or a part of boat cover support systems
• ULTRA DURABLE MARINE GRADE: This prop cover boat pole is made from strong yet lightweight aluminum that resists rust and has a long useful life. Our aluminum tarp poles are reliable and dependable. These telescoping adjustable poles for tarps are effective and sturdy support poles for a boat cover that won't bend or break. We stand behind the quality of our adjustable poles for tarps and boat covers!
• EXCEPTIONAL QUALITY: Better Boat offers a comprehensive line of premium quality boat care, boat detailing products and boat cleaning tools. Developed by boaters for boaters, our marine-grade products are made to strict, tested, trade-secret standards. We offer all the tools and boat supplies needed to make caring for your boat easier so you can spend less time cleaning and more time on the water.

User questions & answers

Question:	There are slits for "additional support straps (not included)". Can you include the size of strap it will accept? 1 inch
Answer:	Initially we purchased 2 poles for our 22’ Pontoon. For our boat 3 poles would be the perfect number but we had to buy 4 (2 packs of 2). 4 should be the right number for a 24’ boat. Quick tip - to help stabilize the poles we have Put the base in a small bucket filled with stones. This helps keep the pole stable and upright. Quality is good and product works well.
Question:	I already ordered these and they seem shorter. The picture shows 3 pole per system but I only got 2. Is there a way to order another pole
Answer:	The base of the support stand is 7" wide. Hope that helps and thanks for your interest in Better Boat.
Question:	How many poles are recomended for a 24 ' pontoon
Answer:	Yes, I used the entire can on the bottom and sides to make sure all was covered and tiny holes were filled. It dried on great in the summer weather. I was able to paint over it, as it dried with a kind of green tint that wasn't very attractive.
Question:	What is base width
Answer:	Yes you can. I have a 14 ft aluminum boat that is ancient and been through the ringer. The rivets have had it. It one point I had 114 rivets leaking. I was scrapping the boat until I found gluv it. I gave it a shot and now it is leak free. All the leaks were in the bottom

• COPPER-FREE ANTIFOULING PAINT for superior single-season protection on pontoon & aluminum hulls.
• ABLATIVE PAINT wears away to continuously expose fresh biocide for maximum protection.
• SPECIFICALLY FORMULATED FOR PONTOON & ALUMINUM BOATS. Bottom paints are used below the waterline only.
• EXCELLENT PERFORMANCE ON OUTDRIVES & RUNNING GEAR. Copper-free formula won't cause galvanic corrosion.
• AVAILABLE IN QUARTS & GALLONS, IN YOUR CHOICE OF BLACK OR BLUE. Coverage: 500 sq. ft. per gallon (125 sq. ft. per quart)

User questions & answers

Question:	What is the finish shine
Answer:	They are 3 poles in one and extend high enough to elevate our boat cover to keep water from pooling on the cover. They work really well for our 18ft ski boat!

Product features

Copper-Free Antifouling Paint Gives Aluminum & Pontoon Boats Powerful Protection Against Barnacles & Slime.

This season, rely on TotalBoat AlumiPaint AF to maintain the integrity and cruising speed of your aluminum boat or pontoon boat. Its copper-free formula contains a potent pairing of concentrated organic biocide and zinc that's safer for delicate marine ecosystems, and ideal for areas that restrict the use of copper-based bottom paints. Because it doesn't contain copper, it won't cause galvanic corrosion, making it safe for all aluminum surfaces & underwater metals, such as outdrives & running gear.

TotalBoat AlumiPaint AF ablative antifouling paint is safe for aluminum surfaces, and safer for marine environments.

If you keep your aluminum boat in salt or brackish waters, it needs an antifouling paint to keep barnacles, weeds & other marine fouling organisms from clinging to the bottom. But, applying copper-based biocide directly to an aluminum hull or pontoons causes a severe chemical reaction called galvanic corrosion, where the aluminum disintegrates into a white powdery substance, aluminum oxide powder. You won't get barnacles, but you'll destroy the bottom of your boat. TotalBoat AlumiPaint AF contains a different kind of antifouling agent. It's a potent, copper-free organic biocide that repels hard marine fouling, such as barnacles & zebra mussels. Copper-free biocide is safe for aluminum hulls, aluminum pontoons, and underwater metal parts on submerged running gear, such as outdrives & trim tabs. It's also very effective in low concentrations, and is better for marine environments because it's biodegradable, breaking down quickly as it's released into the water.

Excellent full-season protection in salt and brackish waters.

TotalBoat AlumiPaint AF wears away gradually as water flows under the hull. It releases fresh layers of biocide at a controlled rate to provide full-season protection in salt water where the water flow is unrestricted. Proper preparation and priming of bare aluminum is critical for performance and corrosion prevention.

TotalBoat Customers Get Great Results

• "Had boat in from May to October in saltwater at NJ Shore. Boat is docked in saltwater lagoon when at rest which normally has junk that just sticks and grows all over bottom within 2 weeks but almost nothing grew on it." - BKNJ17 via Amazon Reviews
• "Product arrived with no damage. It applied well over the aluminum boat. Looks great! Will recommend and use again." - Randy E. via Amazon Reviews

Clean the aluminum surface.

If you're painting bare aluminum, you need to use the right primer and follow the right process, or no paint will stick. For best results, we recommended the following process:

1. Clean the surface to remove loose dirt.
2. Sand with 220-grit sandpaper or an abrasive pad, or blast to bright, shiny metal.
3. Remove residue.

Apply an aluminum-safe barrier coat within 1 hour of sanding prep.

Bare aluminum and other metals will begin oxidizing immediately after sanding prep, so the barrier coat must be applied within 1 hour after sanding/blasting.

1. Apply 2-3 coats of TotalBoat Aluminum Boat Barrier Coat, waiting 2 -6 hours, depending on temperature.
2. To prime properly prepared steel and iron surfaces, use TotalBoat TotalProtect Epoxy Barrier Coat Primer, as directed.

Apply TotalBoat AlumiPaint AF over barrier coat.

For proper adhesion, it's important to apply the first coat of AlumiPaint AF within 3-6 hours of applying the final coat of TotalBoat Aluminum Boat Barrier Coat.

1. Shake or stir AlumiPaint AF thoroughly.
2. Apply by brush, roller, or spray gun. We recommend a 3/16" nap or foam solvent-safe roller cover.
3. Apply 1-2 coats, waiting 1-4 hours between coats. Two coats are recommended for application over bare substrates, around the waterline, and any areas with increased wear.
4. Allow paint to dry 2-8 hours (depending on temperature) before launching the boat.

It all started simply enough. As boaters, we wanted better stuff for our own boats.

Even our favorite products, the ones we'd come to rely on, had room for improvement. It'd be nice if they could hold up longer, cure faster, coat better, apply easier, and—since we all know boat ownership creates a mini maelstrom in your pocket—cost less. So we took everything we knew from 35 years of customer feedback, combined that with our own boating knowledge, and after a few years of rigorous R&D, TotalBoat was born. Launched, rather. By boaters, for boaters.

Need help? The members of our TotalBoat Tech Team are boat owners who really know their stuff. So whether you're trying to figure out what to buy or the best solution for your particular project, they have years of hands-on training, experience, and a passion to help you succeed.

Product description

TotalBoat Aluminum Boat Paint gives aluminum and galvanized metal boats a corrosion-resistant, non-reflective low-sheen finish. While most marine paints won't stick very well, TotalBoat is specifically formulated for aluminum, making it ideal for your jon boat, duck boat, flat bottom boats, bass boats, canoe, dinghy, pontoon boat, trailers, houseboats, and other aluminum boats or boat parts, such as railings and spars. It also comes in camo colors that you can apply one layer at a time for a custom camouflage pattern to improve concealment in natural settings. Or mix colors for a more realistic blend for your particular hunting or fishing area to conceal your duck or hunting blind, tree stands and ladders.Apply directly to metal as a topcoat, or use as a primer and apply the topcoat of your choice. This easy-to-use water-based polyurethane can be applied directly to prepared substrates with a brush, roller or spray gun. No need to etch or prime first, saving time and effort. You'll also finish faster because Aluminum Boat paint dries extremely fast; overcoat in just 1 hour at 72 degrees F without sanding between coats. Before the final coat, wait 12 hours, sand lightly and remove residue. Let the final coat dry for 48 hours, and you're ready to put the boat in the water.TotalBoat Aluminum Boat Paint can be used above or below the waterline on boats used in fresh or salt water. Chromate-free finish has a low VOC content of 75 g/L, very little odor, and cleans up easily with soap and water. Note: TotalBoat Aluminum Boat Paint does not have antifouling properties. For antifouling protection use TotalBoat AlumiPaint AF antifouling bottom paint for aluminum boats. Compare to flat finish paints like Sea Hawk Aluma Hawk, Majic Paints Camouflage Paint, Parker Coatings Duck Boat Paint and Duralux Aluminum Boat Marine Paint. All TotalBoat products are developed for boaters by boaters, to provide great value and great results. 100% made in the USA.

• TOUGH MARINE PAINT: Durable, one-part polyurethane formula adheres directly to aluminum and galvanized metal. No need to etch or prime first; prevents corrosion and resists UV damage, chemicals and abrasion
• ATTRACTIVE LOW-SHEEN FINISH: Ideal for aluminum canoes, dinghies, pontoon, hunting, and fishing boats, jon boats, duck boats, hunting blinds, tree stands, ladders, boat trailers and more. Easy to create a camouflage finish for hunting
• EASY TO APPLY AND DRIES FAST: Apply 2-3 coats by brushing, rolling or spraying. Overcoat in just 1 hour at 72 F, without sanding between coats. Get superior adhesion to prepared aluminum without priming
• ENVIRONMENTALLY FRIENDLY ALUMINUM PAINT formula is chromate-free, has low VOCs, low odor, and easy soap & water cleanup. Thin up 20% with water. Finish won't peel, chip, or fade
• AVAILABLE IN EARTH BROWN, KHAKI, BLACK, WHITE, LIGHT GRAY AND ARMY GREEN (similar to olive drab green paint); Sizes: Quart and Gallon; Coverage: 80-100 sq ft/qt; 320-400 sq ft/gal; Use above or below the waterline (note: is not an antifouling paint)

User questions & answers

Question:	Can i apply this paint in the cold? i live in wisconsin and have a project to complete before the spring. (if i allow the paint to cure for 72 hrs
Answer:	Yes by all means use etching watsh first then paint it that same day.
Question:	How dark is the army green or how tan is khaki
Answer:	I personally sprayed it using a siphon feed latex gun and am extremely pleased with the results. It can also be brushed or rolled on. I HIGHLY recommend taking the time to scuf the aluminum with 50-100 grit sandpaper using any tools you may have or by hand. The primer will adhere to the metal much easier and will last much longer.
Question:	Will this work well on an exterior aluminum railing? Would using the etch wash first help make the finish adhere better
Answer:	Flat finish
Question:	How do I apply the paint on a 15 foot aluminum boat
Answer:	Yes the slits are designed to work with 1" straps. We offer straps designed to work with our poles but are currently out of stock at the moment. You will find them here when back in stock. https://www.amazon.com/dp/B08CHJLVQD Hope that helps and thank you so much for your interest in Better Boat.

Product description

New Aluma Hawk seahawk Ah7033/gl Gallon Jon Boat Green : Aluma Hawk is a quick-dry high-solids corrosion-inhibiting coating designed for use on aluminum with no need of primer. It is chromate-free and may be used above or below the waterline but contains no antifouling characteristics.

• aluminum boat paint

User questions & answers

Question:	Can this paint be applied with a spray gun
Answer:	Yes, this is a copper free paint. This is not an antifouling paint. Bottom Paint Store
Question:	What color is this paint
Answer:	The manufacturer does not provide a color comparison/match for this product. The Jon Boat Green is a dark green which is similar to the popular green used on John Boats.
Question:	is this paint copper free
Answer:	Hello, the minimum recommended application temperature for this product is 50 degrees. Please keep in mind that application temperature does impact cure time. The colder it is when applied, the longer it will take to fully cure. Thank you.
Question:	How does this match Lowe Boats “dead grass green
Answer:	Army green is light

Product description

Fortress Marine Anchors 

Product Overview

Fortress Anchors are constructed from a high-tensile, corrosion-resistant, aluminum magnesium alloy that is precision- machined into interlocking components with no welds to weaken the metal. This results in a lighter, easy to handle anchor with superior holding power. All Fortress Anchors are precision-machined for sharpness and quick penetration into common sea bottoms, which insures faster setting performance. 

100% Lifetime Warranty

Fortress Anchors offers a Lifetime Parts Replacement Warranty. In the unlikely event of damaging an anchor part, Fortress will replace the damaged part for free, you only pay shipping and handling. 

Fortress Anchor MODEL FX-7

• Boat Length: 16-27’ Inches

• Anchor Weight: 4 lb.

• Replaces Steel Anchors 6-9 lb.

Fortress Anchor FX-7 Holding Power

• Working Load: 700 lb

• 32° Hard Sand Holding: 2,800 lb

• 45° Soft Mud Holding: 840 lb

• 32° Soft Mud Holding: 420 lb

Fortress Anchor FX-7  Dimensions

• Shank Length “A”: 24” in

• Fluke Length “B”: 14” in

• Stock Length “C”: 19” in

Fortress Anchor FX-7 Hardware

• Proof Coil Chain: 3/16 “ in

• Nylon Rope 3/8 “ in

• Shackle Size: 1/4 “ in

• The Fortress Anchor Advantage: A hardened High-Tech, rustproof aluminum-magnesium alloy anchor.
• For boats of 16-27’ feet, Fortress FX-7 Anchor has superior holding power at a fraction of the weight . Easily assembles and disassembles for convenient storage.
• Highest rating in over 20 independent tests worldwide. Over 1 million+ people have joined the Fortress Marine Anchor family.
• FORTRESS ANCHORS: offers a 100% Hassle-Free Lifetime Warranty, and a product made in the USA.
• FORTRESS ANCHORS: provides a product tested and used by the U.S Navy and U.S Coast Guard.

User questions & answers

Question:	Does it come with the storage bag
Answer:	It’s all aluminum
Question:	The anchor rod going side to side, My boat has an anchor holder that will hold between 19" and 21". Which anchor fits better the 4or 7 lb
Answer:	Our boat was 32’ and it worked great. We took our boat around Tierra Verde.. Fort Desota area. Very sandy stuck first time.. every time
Question:	does it contain any lead or it's all aluminium
Answer:	Yes, it looks very good spray applied. Thin with MEK up to 10% as recommended by the manufacturer. Bottom Paint Store
Question:	Would this work well for a 24' tritoon boat used in central west florida near shore? we have mostly sand but some rocky bottoms
Answer:	Product number 7033 is the Jon Boat Green Aluma Hawk. It is also available in blue, grey, white, tan, and black. Bottom Paint Store

Product description

Board a pontoon, dock or floating raft effortlessly with the Extreme Max Pontoon and Dock Ladder! Even in deep water, the angled design and extra-wide steps make boarding safe and comfortable. Designed to mount easily to pontoons, docks or floating rafts in less than 5 minutes. Use the same ladder for all three applications with the purchase of additional mounting hardware. The simple, secure mounting system makes relocating the ladder fast and easy, and allows convenient set-up and storage. Stainless steel mounting hardware included. Corrosion-resistant in freshwater applications; oxidation may occur in brackish and saltwater. Two-year replacement .

• 100% aluminium 5-step pontoon ladder
• Heavy-duty square tubing construction
• Step Interval: 11. 5" / Step Width: 15. 75" / Total Width: 17. 75"
• Weight Capacity: 300 lbs.
• Two-year replacement
• Fit Type: Universal Fit

User questions & answers

Question:	Will this ladder hold 285 lbs
Answer:	Yes the ladder is aluminium and comes with the clips to screw down. It does not include the screws. Use #14 stainless screws 1 1/2" to 1 3/4" long - available at Lowes. You will need 4 screws ( 4 to 6 in a pack)
Question:	How do I order additional mounting hardware
Answer:	Mine came the same way and it was perfect. That’s up to you.
Question:	Is this ladder made of aluminum and does it come with installation bolts
Answer:	No , just the fortress comodore line for small boats comes with storage bag
Question:	I received the boat ladder I ordered - the box is destroyed but it looks like most of the stuff is in it- not sure do
Answer:	The length of the 4lb anchor is 19" and the 7lb is 22".

Product features

Pontoon and Dock Ladder

This angled, heavy-duty aluminum ladder is designed to do anything. Whether you're planning to take it on your pontoon, put it at the end of the dock or use it on a swim raft.

The built-in angle makes boarding effortless, with extra-wide steps spaced 11.5" apart for solid footing. It's constructed of 1" aluminum tubing for unsurpassed strength and extra-light weight.

Never struggle getting out of the water again with a purchase of Extreme Max Pontoon and Dock ladders.

Relocate With Ease

One set of stainless steel mounting hardware is included. Use it to mount your ladder on a pontoon, swim raft, or dock. Purchase the Footman Relocation Kit (3005.3455) to use your ladder in other places. Simply install the Footman Relocation Kit wherever a ladder will be necessary. The next time you need to move your pontoon/dock ladder you will be ready to go with your pre-installed Footman Kit.

Mounting hardware installs in 5 minutes. Ladder attaches and detaches easily for use in multiple locations or easy storage and transport.

Extreme Max

Extreme Max is more than a brand.

It's a way of life. It's the expectation that your outdoor gear will withstand high speeds, low temperatures and deep powder; long days in the water and sun; or muddy rough-and-tumble terrain.

For every outdoor extreme, we have the equipment.

Extreme Max. Do more outdoors.

Product description

Features locking 2-7/8'' seat mount that swivels 360°. 2-7/8''-dia. tube with 9''-dia. base. Adjusts from 12'' to 18''. Two-year warranty. Meets ABYC standards. Class A driver-side pedestal.

Features:

• Locking 2-7/8'' seat mount
• 2-7/8''-dia. tube with 9''-dia. base
• Adjusts from 12'' to 18''
• Meets ABYC standards

• Wise adjustable Height Locking Pedestal is strong and durable
• Locking 2-7/8" seat mount with 360 degree swivel
• 2-7/8" diameter pedestal adjusts 12" to 18" in height
• Smooth, thick wall, polished anodized aluminum
• Wise Hardware features a three year warranty

User questions & answers

Question:	Can the seat and pedestal be removed when not in use? Just the mounting plate remain in place
Answer:	The post is 11". the base shown is 3/4" thick
Question:	Is the pedestal removeable for stowing
Answer:	It will fit tight! Push hard to get it in. It will be even harder to get out!
Question:	can you use for driver seat
Answer:	Search for stainless brackets. I went with aluminum to reduce the weight in my Jon boat.
Question:	Pedestal will be attached to wood boat bench. What size screws are recommeneded
Answer:	.0177” is about 1/57th of an inch or .45mm. You would need a #77 (.4572mm or .018”) drill bit. I would say that’s a little too small.

Product features

Wise 8WP21-18S Adjustable Boat Seat Pedestal 12"-18"

Features:

• Adjusts from 12" to 18" in height
• Thick walled, 2 7/8" polished anodized aluminum post
• Seat spider mount with adjustment knob and locking paddle handle
• 9" diameter base with recessed mounting holes
• 360° rotation with locking knob

Product description

Adjustable outboard motor bracket Works with 4- stroke motors up to 15 HP or 2- stroke up to 20 HP, max weight of 132 lbs. This black, hard-coat anodized aluminum bracket is built to handle the increased torque output of today's four stroke engines. Twist-knob Safety Locks provide increased torque rating while helping secure bracket in place. Motor's weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. Boasts a 2"-thick, extra-wide, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware. Five-position lock bar and 10" of travel on 55-0407AL, and four-position lock bar and 11" of travel on 55-0408SS allowing for better range of trim adjustment letting you fine tune motor height for optimal performance. Rated for long or short shaft engines.

• Designed for 2- and 4-stroke motors up to 15 HP or 132 lbs
• 10" of travel and 5 vertical running positions let you fine tune the motor height for optimal performance
• Do not use without Panther 55-0415 safety cable—included
• Meets ABYC Standards

User questions & answers

Question:	What’s the drilling dimensions? I.e. 7x6 (LxH
Answer:	Looks like 14” - very good unit lifted my 10hp with no trouble
Question:	How far does this mount swing out when it goes up and down
Answer:	It did not come with a back plate. I did not use one myself. I only used bolts washers and nuts. Use it on my deckboat for a 25hp kicker. I take the motor off though when transporting and put on when we get to the water.
Question:	In the up position how far is it from the top of the transom on the unit plate to the first or top bolt hole
Answer:	4 small bolts fasten ladder with warshers, ladder seem very solid. holds 215 good.
Question:	Does this come with a backplate to mount on the inside of the hull? Or do you need to purchase seperstely
Answer:	What are you wanting to buy. This lader has everything you need. It comes with everything you need to mount it. I love it. It's very sturdy ,well built, very nice looking . I give this a 5 star rating . Very good deal. I strongly recommend buying this product.

Product description

Star brite is the marine industry's leading manufacturer of waxes, polishes, cleaners, teak finishes, motor oils, fuel additives and more. Because Star brite is run by avid boaters who test every item on their own boats, only the latest technology and highest-quality ingredients are used.

• Formulated to clean and restore stained or dull aluminum pontoon boats, Jon boats and canoes
• Use Ultimate Aluminum Polish as step 2 when removing stains and restoring older boats
• Convenient 64 fl. oz. size with sprayer for easy application

User questions & answers

Question:	Lo puedo utilizar con estufa de aluminio
Answer:	This product can be used on all bare, unpainted aluminum surfaces. Please refer to the How To video on www.starbrite.com or call (800) 327-8583 for more information.
Question:	Will this clean cement from a black metal fence around pool
Answer:	you need (4) 64oz bottles ?
Question:	Does this work on aluminum fuel tankers
Answer:	6 1/2 width x 7 1/2 height
Question:	How much is needed to clean 2 20' pontoons
Answer:	I would expect the answers of 10" to a "foot" are correct. I'm very impressed with this bracket with a 8 h.p. 4 stroke Honda attached. I't.s robust enough to handle the weight and makes it very easy to raise and lower this size of outboard. It replaced an older 2 stroke bracket and is excellent for this class motor.

Product features

Ultimate Aluminum Cleaner & Restorer

Star brite Ultimate Aluminum Cleaner & Restorer is engineered to bring back unpainted aluminum surfaces that have become dull or stained.

Unlike other 'all surface' cleaners, this product is formulated specifically for use on aluminum and strips away grime, stains and oxidation without harming the metal.

Ultimate Aluminum Cleaner & Restorer is an excellent choice for quickly cleaning and improving the appearance of all aluminum pontoon boats, jon boats, canoes and other unpainted aluminum surfaces that have lost their original luster.

Typical Weathered Aluminum

Pontoons are a lot of fun, but keeping them looking like new can be a real chore! Star brite has a complete line of cleaners and restorers for all your pontoon & boating needs. Plus, Star brite is a US company that manufactures Aluminum Cleaner and hundred of other cleaning products and tools right here in the United States. So we are always just a phone call or email away if you have any questions

Before & After

Restore your toon to like new condition with Ultimate Aluminum Cleaner & Restorer. It's specifically for use on aluminum to strip away years of oxidation, grime and waterline/lime stains without harming the metal.

Before & After Jon Boat

Star brite Ultimate Aluminum Cleaner & Restorer works great on aluminum jon boats & canoes too. It makes any unpainted aluminum look brand new.

Polish & Protect

Don't forget to polish and protect your aluminum with Star brite's Aluminum Polish. It's specially formulated to preserve the finish of aluminum pontoon boats, canoes and jon boats with PTEF polymers that provide UV protection and help repel dirt and future stains