14 best scuba regulators

• Ideal scuba diving regulator for beginners and travelers at an affordable price. Piston 1st stage plus a compact single-hull second stage. 1 HP and 4 LP ports. Weight: 923 g - 32.6 oz. Made in Italy.
• A heavy-duty piston 1st stage, affordable, simple, reliable and robust, suitable for intense use. Appreciated by Dive Centers and specialized companies who consider it to be a very reliable device, due to the surprising level of performance.
• Conical filter with large filtering capacity, essential for preventing infiltration of particles from the tanks. Exterior LP regulation with a common hexagonal key, greatly facilitates managing adjustments and technical maintenance.
• Asymmetrical frontal 2nd stage cover drilling. The water flow pushes the diaphragm anti-clockwise direction to create its retraction in a flat position and to make the lever decrease gradually in precise perpendicularity, regardless of condition.
• The specific calibration of the inhalation mechanism slightly changes the personality of the air outlet by rewarding an abundant flow without the need to exploit the Venturi effect, beyond the exquisite touch and sensitivity of this type of regulator
• The AC2/Compact regulator is designed and manufactured in Italy by Cressi, an Italian brand pioneer in scuba diving, snorkeling and swimming equipment since 1946.The product is covered by a 2-year limited warranty.

User questions & answers

Question:	How long is the hose? Some people have commented that it is short
Answer:	Water sensors are always on.
Question:	What type of vave is this compatible with
Answer:	No, SimpliSafe uses a different method of wireless communication as other companies. Unfortunately, this means that the SimpliSafe system is not compatible with other brands components.
Question:	Is the 2nd stage adjustable for easier/more resistance in air flow
Answer:	Yes you need Simplisafe. Anytime the water sensor comes into contact with water, the sensor will transmit a wireless signal to the SimpliSafe base station, which will audibly announce the water trigger to you. If you are subscribed to our alarm monitoring, you’ll also get a call from our alarm monitoring service to inform you.
Question:	My wife has a small face/mouth. Is the second stage light and how is the mouthpiece for small mouths? Thanks
Answer:	Smart Alerts will be sent to your phone if you are connected to our Interactive Monitoring Plan.

Product features

AC2 COMPACT

TECHNICAL FEATURES 1ST STAGE - Piston design - 1 outlets HP 7/16 UNF - 4 outlets MP 3/8 UNF - Service pressure: 232 bar (3365 psi) Yoke version - Calibration pressure: 9,5-10 Bar - Brass body Electroless Nickel plated - High capacity conical filter electroless nickel plated - Aisi 316 long lasting piston - Extremely easy in maintenance since IP is adjustable from the outside - Stainless steel spring - Flow rate: 2100 l/min - Yoke version weight: 635 gr - 22.4 Ounces CERTIFICATION EN250/2000

HEAVY DUTY PISTON

Piston 1st stage plus a compact single-hull second stage. 1 HP and 4 LP ports. Weight: 923 g - 32.6 oz. Made in Italy. A heavy-duty piston 1st stage, affordable, simple, reliable and robust, suitable for intense use. Appreciated by Dive Centers and specialized companies who consider it to be a very reliable device, due to the surprising level of performance.

ASYMMETRICAL FRONTAL 2ND STAGE COVER DRILLING

The water flow pushes the diaphragm anti-clockwise direction to create its retraction in a flat position and to make the lever decrease gradually in precise perpendicularity, regardless of condition.

Product description

1st Stage Regulator Spec: - Maximum working pressure 3500PSI (232BAR). - Intermediate pressure output balanced piston 135-145PSI - Four 3/8-24 UNF-2B intermediate pressure ports - One 7/16-20 UNF-2B high pressure ports - Chromium plated bass body - Stainless steel springs. - Weight: 537 grams.

• High quality regulator first stage and second stage with 36" yellow hose on the octopus and black hose on the 2nd stage regulator
• Unbalanced Flow-by Piston Regulator
• Non-adjustable second stage
• Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage
• Large purge button

User questions & answers

Question:	Does this regulator have two 2nd stages - a regular and an octopus
Answer:	Yes. Each unit ca send an alert via the Flo by MOEN app, sound an audible alarm or emit a blinking LED light.
Question:	Do these regulators have to use your 1st stage, or would I be able to use my first stage with them
Answer:	The 3 Pack of Smart Water Detectors include 3 leak sensing discs. The Leak Sensing Cables are sold separately as an accessory.
Question:	Will Palantic AS101 diving yoke and regulator work safely in 30 to 50 degree water
Answer:	The Smart Water Detector needs to be connected to the existing wifi in the property and you would need to have access to the account that the device is paired to.
Question:	Can u go down to depth of a 100 ft with this regulator
Answer:	Hello, Yes you can adjust your notification delivery for the system to send you an email, SMS Text, or Push notification. Please contact our Support Team if you have additional questions. Thanks!

Product description

Feature:

145 PSI Yellow 2nd Stage Scuba Explorer Diving Dive Regulator

Material:

PC +ABS

Valve: Electro Less Nickel Plated Brass

Diaphragm: Silicone

Color: Yellow

Quantity: 1 pc

Size: as the picture shows

Pressure hose length: 57cm / 22.44"

Type: downstream demand valve

Maximum Intermediate Pressure: 145 PSI

Inhalation Effort: 1.10 - 1.25 CIW

Exhalation Effort: 1.10 CIW

Flow Rate: 30+ SCFM (air supply: 3000 PSI)

Package includes: 1 x Scuba Diving Dive Regulator

• 22" low pressure hose.
• Silicone mouthpiece.
• Free flow resistant.
• Under-chin exhaust system, directing bubbles to the sides.
• Mechanically balanced for smooth and easy inhalation and exhalation.

User questions & answers

Question:	Can I hook this to t80 compressor
Answer:	No, it does not support Alexa. It can send notification and email to you when the sensor contact water. Need any help, please contact us to [email protected].
Question:	What is the size of the brass tip on the regulator. Or what is it called
Answer:	I have the gateway in my kitchen (middle floor of 4,000 sq ft house) and sensors in both basement and 2nd floor at opposite sides of the house and the connectivity is fine.
Question:	Is this adjustable for input pressure? I see no way to adjust
Answer:	APP can not remotely disable the beep. Since the water-leak detector has sensors on the surface, once it is wet, it will beep, only if there is no water on the sensors, it will stop beeping. Hope we could have your understanding! Need any help, please contact us to [email protected] :)
Question:	can i use this with my scuba tank aluminium 80 3000psi
Answer:	Yes. I believe so. As long as you place it out side the tub wall on the floor where potential water will overflow, it will work. The leak detector 4 sensors at the bottom of the device to alarm you whenever there is a pool of water. Note : There is also a sensor on the top ( two parallel lines) which can detect a drip from the faucet also. Hope that helps.

Product description

Special mouthpiece designed to reduce jaw fatigue,high quality, soft silicone,easy to install,increases breathing confort.

• Scuba mouthpiece replacement.High quality,soft silicone confortable and durable design.
• Confort bite fit most standard mouthpiece scuba diving regulators and snorkel.
• Completely moldable mouthpiece fit theeth,relaxes facial muscles.
• Special scuba diving,black design,fit mouth choice.
• A pack of three mouthpieces and three regulator tie included.

Product description

The SCUBAPRO MK2 EVO/R195 is the perfect go-anywhere regulator for people who like to keep their diving simple and fun. The regulator’s classic downstream piston design features a chrome-plated brass body with one high-pressure and four low-pressure ports. SCUBAPRO’s Extended Thermal Insulating System fully isolates the mechanical elements from the cold, increasing freezing resistance in cold-water conditions without compromising breathing performance. Dive confidently with the modern second-stage design, which combines a classic downstream valve with a large diaphragm, functional purge, and VIVA switch to control free flow. The ultra-comfortable orthodontic mouthpiece is easy to grip yet doesn’t inhibit airflow. Driven to constantly innovate and improve the diving experience, SCUBAPRO builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface. Features INT connector; reversible hose attachment for use on deco tanks; suitable for cold, temperate, and warm waters; one-year warranty.

• Scubapro MK2 EVO/R195 Regulator
• Legendary Safety and Reliability
• Bulletproof Reliability and Trouble-Free, Minimum Maintenance Regulator
• 3/8" Threaded Low Pressure Hose
• First Choice of Diving Centers and Rental Facilities Worldwide

User questions & answers

Question:	Will this reg handle Nitrox
Answer:	The Ecolink is a Z-wave device. The question you need to ask Adt pulse is the Ecolink a configurable device on their system. I am using it with a Samsung Smartthings hub.
Question:	Is the r195 balanced
Answer:	No it’s not a tempature output type. It’s a above freezing. Below freezing. Output type Sensor.
Question:	Does this come with an alternate air source
Answer:	Kind of...I added it as a generic open/closed door sensor (open indicates flooding). I then used IFTTT to make it so that I get useful alerts (i.e. IFTTT makes it so that it actually says there is flooding. Pretty easy to do - worked great.
Question:	Can this be purchased with the DIN attachment instead of yoke
Answer:	I don’t know anything about the August Connect hub however the Ecolink works with z-wave enabled products. So if that hub uses z-wave it should work. Hope this helps.

Product features

Classic, All-Purpose Regulator System

Discover the peace of exploring the water with the SCUBAPRO MK2 EVO/R195 system, which combines the compact MK2 EVO first stage with the R195 second stage to create an all-purpose, all-weather regulator system.

The perfect go-anywhere reg for divers who like to keep their diving simple and fun, the MK2 EVO first stage with downstream piston features SCUBAPRO's patented XTIS (Extended Thermal Insulating System) to isolate the mechanical elements from the cold. The R195 second stage features a classic downstream valve and comes with a VIVA switch to control free flows.

The Benefits of Piston Technology

The task of a first stage regulator is quite simple: reduce the high-pressure air flowing from the tank to a consistent intermediate pressure for delivery to the second stage. By far the best way to accomplish this necessary step-down process is with a piston-style first stage.

MK2 EVO: Classic Downstream Piston First Stage

A reliable diving workhorse, the MK2 EVO first stage downstream piston-style first stage offers internal components that are specifically designed to resist freezing in extreme cold-water conditions—perfect for both reef diving the Caribbean and wreck diving the Great Lakes.

It’s a great entry-level reg for new divers, as well as for veteran divers and travel divers who like to keep their diving simple and affordable.

The MK2 EVO first stage is 3.5mm smaller than its predecessor but houses an oversized piston by 1.6mm that provides better breathing performance and increased airflow. Additional internal technical improvements include a spring insulating bushing and coating, an insulating piston bushing, an insulating sleeve and antifreeze cap.

Classic Downstream R195 Second Stage

A modern second stage design that combines a classic downstream valve with a large diaphragm, the SCUBAPRO R195 reg also features a functional purge button and Venturi-Initiated Vacuum Assist (VIVA) switch for smooth and easy breathing and simple operation.

A sensible safe second stage for all divers, the R195 reg is also perfect for deco tanks thanks to its extra-long hose and reversible hose attachment. It also features an ultra-comfortable orthodontic mouthpiece, a rugged reinforced technopolymer casing, and durable metal valve housing.

Product description

The XS Octopus has a body of the 2nd stage of traditional dimensions, made of technopolymers and a downstream delivery system with side valve (adjustable), simple and very reliable. An injection duct that channels a flow of pilot air towards the nozzle enhances its performance. The 2nd stage is equipped with a flow diverter that acts on the Venturi effect, with a dive/pre-dive function. Moved to the (-) position, it works as a pre-dive, for entering in the water and for the initial phases of the dive, while moving it to the (+) position allows the regulator to develop maximum performance. Constantly updated over the years, is a regulator that has many admirers in the world for its simplicity and robustness, which translate into practice in ease and low maintenance costs. The performance is high and suitable for any type of diving. The XS Octopus is designed and manufactured in Italy by Cressi, an Italian brand pioneer in scuba diving, snorkeling and swimming equipment since 1946. The product is covered by a 4-year limited warranty.

• The XS Octopus has a body of the 2nd stage of traditional dimensions, made of technopolymers and a downstream delivery system with side valve (adjustable), simple and very reliable.
• Downstream system
• Adjustable venturi effect
• Easy maintenance
• Weight without hose: 206 gr - 7. 27 oz
• JACKETED HOSE extremely light and flexible weight: 153 gr - 5. 4 oz
• CERTIFICATION Annex B EN 250: 2014_ A>10°C
• The XS Octopus is designed and manufactured in Italy by Cressi, an Italian brand pioneer in scuba diving, snorkeling and swimming equipment since 1946.

User questions & answers

Question:	can somebody please make video on how to use that exact make and model and put
Answer:	The LP hose is 33.5 in - 85 cm
Question:	Se puede utilizar hasta que mezcla de EANx con esta segunda etapa
Answer:	Hello Kea, You will need the yoke valve. Happy Diving, Cizon Online Scuba on Amazon 1.702.897.5111 or 1.866.728.2293
Question:	How do I contact Cressi for a warranty claim? The octupus did not work properly after purging and a mixture of air/water was delivered through it
Answer:	no...not on this one
Question:	What type of fitting is this , is it a NPT
Answer:	Mine came with a small mouth piece. Or you could buy one they are attached wit a zip tie fairly cheap and easy to install

Product description

Mares Instinct 15X Regulator: Lightweight and Compact Design Great Travel Regulator, Comprehensive Owner's Manual - Balanced Diaphragm First-Stage DFC System, Chromed Marine Grade Brass, Inherently Environmentally Sealed Design, Design Provides Protection from Sand, Salt, Chlorine, Pool Acid and Contaminants, Pre-Oriented Pressure Ports, A.C.T. Advanced Coating Tri-Material Valve Technology, Four 3/8" Threaded LP Port, Two 7/16" Threaded HP Ports - Downstream Demand Valve Second Stage, Material: Techno-Polymer, Small & Compact Design, Side Exhaust, Deflects Exhaled Breath, Compensating Openings, Prevent Free-Flow in Current, Oversized Purge Button, Vortex Assist Design (V.A.D.) System, Fluid Dynamic Deflector (FDD) - Mouthpiece: Soft Hypoallergenic Silicone, Reduced Jaw Fatigue . . . Mares Prestige Octo: The Prestige is a mid-size octopus with a stylish design, strengthened by technology to give steady, natural and effortless breathing. All Mares second stages are a reliable downstream valve design and offer the unique patented Vortex Assisted Design (VAD) system. The air bypass tube conveys air to the mouthpiece creating a swirling vortex with a low-pressure area in the center that keeps the diaphragm down during inhalation, for very sensitive and easy breathing at all depths.

• Package includes: Mares Rover 2S Regulator + Mares Rover Octopus
• Mares Rover 2S Regulator Reliability, light weight and simplicity.
• Mares Rover Octopus Compact and lightweight.

User questions & answers

Question:	How many low abd high pressure ports are there
Answer:	Yes Used this for about 15 dives Works great
Question:	Is this a yoke system
Answer:	no use can use your 1st stage
Question:	What else would need to be added to complete the regulator set other than a computer
Answer:	Not 100% sure but I would probably say no because of the price.
Question:	Does it come with hoses
Answer:	i cannot trust it yet. i just had a pool session .the yellow cap came out.

Product description

Brass 2nd Stage Quick Disconnect - Add a quick-disconnect to most regulators or full face mask

• Add a quick-disconnect to most regulators or full face mask
• Installs between low pressure regulator hose and second stage
• Chromed brass construction
• Lock-down screw to prevent accidental disconnection
• Low pressure use only - below 200 psi

User questions & answers

Question:	Will this work on a Poseidon Odin regulator? I'm looking to do a double regulator setup for travel
Answer:	Nope. The T80 is a low pressure compressor and will not generate enough pressure to make this work.
Question:	Will this work on my guage cable? For removing my computer that's in my cluster
Answer:	The Brass tip can be used to contact the Dive tube, if you remove the brass tip, the screw hole can be used to contact the dive pressure reducing valve.
Question:	Pueden montar un video de como se usa esto exactamente
Answer:	Yes! I have mine set to breathe easily at 90psi. The adjustment is located inside the regulator, accessable by unscrewing the supply hose. You can use a large flat screwdriver to adjust it. I recommend watching a YouTube video on "Adjusting regulator freeflow" if you are unsure what I'm talking about.
Question:	Do you have just the female
Answer:	Since this question got mixed answers, I'll confirm for anyone else reading it: This is a standard (albeit cheaply-made) regulator. You can use it for SCUBA as a primary second stage, or a safe-second octopus. It can also be used for surface-supplied diving. It comes with a barb-fitting adapter, but under that is a 3/8th O-ring fitting that connects to the intermediate pressure ports on any first stage regulator. It is set at 145psi when you receive it, but you can easily adjust the working pressure to whatever your first-stage puts out for easy breathing effort. There are lots of video on youtube showing how, it is standardized on most regulators. Dive shops will also adjust it more precisely for you, however they honestly may not touch this one because of the brand/cheapness.

Product description

If you believe that you shouldn't have to sacrifice performance for price, the Alpha 8 Sport is for you. The Alpha 8 Sport is the top performing regulator in its class, and one of the most affordably priced regulators you can buy. The SP-5 First Stage Regulator offers all divers the opportunity to own a top performing regulator.

• The best price-to-performance ratio in its class
• Designed to perform to the U.S. Navy's Class A standards at 198 feet
• Inexpensive to maintain
• Paired with our SP-5 Sport Piston First Stage

User questions & answers

Question:	Is it nitrox compatible
Answer:	Hi, Thanks for your question. It is not a balanced 2nd stage. Thanks Divemaster Chris 866-728-2293 Onlinescuba
Question:	Is this yoke or din
Answer:	Nope, alternate air source is not included and should be purchased separately
Question:	Does it also include the first stage
Answer:	Hi Mike, Great question, Yes you can purchase it with a DIN attachment instead of yoke for an additional charge or you can purchase the DIN attachment right out of the box. I hope this helps. Have a great day and Happy diving :) Ivy

• EVA Foam
• HYBRID ULTRA-PROTECTION - Molded EVA foam hard-shell lid, foam padded side/back with hidden protective plastic backing for the safety of your regulator, dive instruments and accessories
• TANGLE-FREE, KINK-FREE DESIGN - Rounded shape with flat stand-up bottom and double internal security straps protects your regulators and hoses
• IDEA TRAVEL BAG - Heavy-duty 14 x 12 x 4" (35 x 30 x 10 cm) bag fits your regulator, hose, octopus, dive computer, gauges, etc + Internal mesh zippered pocket for tools and accessories + External zippered pocket for your log book, larger personal items or accessories
• PREMIUM QUALITY DETAILS – D-ring utility anchors to attach to suitcase or scuba bag, double lockable zippers, comfortable rubber grip carrying handle, reinforced stitching, premium fabric, and meticulous construction make this the best regulator bag on the market to serve you dive after dive, year after year
• BACKED BY THE ATHLETICO 100% SATISFACTION GUARANTEE - If your are not satisfied with your new Athletico Scuba Regulator Bag for any reason, simply return it for a full refund, no questions asked!

User questions & answers

Question:	Weight of this bag empty
Answer:	I am unsure what an NPT fitting is. If you are using it for scuba diving, this works with the hose supplied. If you are trying to use another hose, you may problems. Not sure this will help you.
Question:	Can i fit 3 sets of regulators in tbis case
Answer:	Thanks for reaching out to us! This regulator can handle up to 40% Nitrox out of the box, however if the mix is greater than 40% you will need to have it O2 cleaned by an authorized ScubaPro service technician. if you have any further questions please don't hesitate to ask! Thanks, Jared HouseofScuba

Product features

Athletico Scuba Regulator Travel Carrying Case | Hybrid EVA Foam Hard Shell LID + FOAM Padded Bottom w/impact-resistant plastic reinforcement backing

The Athletico Scuba Regulator Bag is built to protect and conveniently store your scuba regulator, dive computer, and gauges. Perfect for travel.

HYBRID ULTRA-PROTECTION

• Molded EVA foam hard-shell lid
• Foam padded sides and back
• Hidden protective plastic backing

TANGLE-FREE, KINK-FREE DESIGN

• Rounded shape with flat stand-up bottom
• 2 internal security straps. Adjustable hook/loop closure

EXTRA STORAGE

• Internal mesh zippered pocket for tools and accessories
• External zippered pocket for your log book, larger personal items or accessories

Premium Quality Details

• D-ring utility anchors can be used to attach to scuba bag or suitcase
• Double lockable, corrosion-resistant, quality zipper pulls
• Comfortable rubber grip cushioned carrying handle

Premium deluxe carrying case to protect your scuba regulator - with hybrid hard shell + foam padding to keep your gear safe

Beyond its storage capacity, this premium carrying case is comfortable and durable. Made with high quality fabric, this bag is lightweight, yet rugged enough to protect your regulator, octopus, dive computer, etc. This Athletico Scuba Regulator Carrying Case is designed to make storage and transportation simple, safe and convenient.

Keep track of small tools and accessories

Internal mesh zippered pocket to secure small tools and parts.

Two hook and loop adjustable straps secures your hose to prevent kinks and tangles

Perfect for travel

The webbing handle is cushioned with a rubber carrying grip.

Discrete design is sleek, contemporary and doesn't advertise expensive contents.

Extra storage

Keep your log book, snacks, phone, personal items handy in the exterior back pocket while you travel.

Utility anchors on the back let you secure the bag to your suitcase or scuba bag.

Athletico Stands for Quality

Athletico stands by our products. We strive to provide the highest quality & standards and exceed our customers' expectations.

Athletico is proudly based in the U.S.A. and serves our customers around the world.

Quality first, always.

Athletico offers a range of dive and swim bags and accessories. Athletico stands for quality. Shop and buy Athletico with confidence.

Product description

1st Stage Regulator Spec: - Maximum working pressure 3500PSI (232BAR). - Intermediate pressure output balanced piston 135-145PSI - Four 3/8-24 UNF-2B intermediate pressure ports - One 7/16-20 UNF-2B high pressure ports - Chromium plated bass body - Stainless steel springs. - Weight: 537 grams. 2nd Stage Regulator Spec: - 150PSI maximum intermediate pressure. - 1.2 to 1.4 CIW (column inches of water) - inhalation effort (ADJ-KNOB on Max) - 1.1 CIW exhalation effort - 30+SCGM (air supply: 3000psi) - Weight: 251 grams - Adjustable.

• High quality regulator first stage and second stage with 27" hose
• Comfortable silicone mouthpiece
• Large purge button
• High performance over-balanced first stage provides progressively greater intermediate pressure
• Octopus comes with 36" yellow hose

User questions & answers

Question:	is this nitrox ready
Answer:	Yes...Yellow for the Octo and black for the stage two
Question:	Are the regulator hose and octo hose both included
Answer:	This is used just as you would use most second stage Octopus', as a redundancy back-up in the event that your buddy ran out of air. If you would like to learn more, we offer a full range of scuba diving courses and training. MSDT Frankie G
Question:	Can I add a hose for tank pressure gage and/or BC fill with this setup
Answer:	Hi, Thanks for your question. Yes, you can use this with EANx. Thanks Divemaster Chris 866-728-2293 Onlinescuba
Question:	Do these use traditional rubber hose or more flexible braided hose
Answer:	Hi Robert, Start by contacting the shop you purchased this from and they can then help trouble shoot this for you. Then they can set up a return for warranty for you, Hope this helps, Instructor Bill OnlineScuba 1 866 728 2293 Since 1996

Product description

Scuba Choice - Top rated dive shop with discounted prices. We have everything you need- Scuba Diving/Snorkeling/Spearfishing/Swimming/Surfing/Bow fishing Gears.

• Non-adjustable second stage
• Comfortable silicone mouthpiece
• Large purge button
• Comes with a yellow 36" 350PSI hose

User questions & answers

Question:	Can this regulator be used as a second stage for a scuba set-up (not air compressor
Answer:	Hello Jason, thank you for your question. The XS Scuba Second Stage Quick Disconnect is a set of both the male and female. It can be purchased in male only but not female only. If we can be of further assistance, please give us a call. Happy Diving, Cizon Online Scuba on Amazon 1.702.897.5111 or 1.866.728.2293
Question:	Will this operate below 40 psi feed? My compressor maximum is 40 psi
Answer:	Hi, Thanks for your question. The 1st stage has 1 HP port on it. If you have any other questions, please let us know. Thanks Divemaster Chris 866-728-2293
Question:	Would this fit with a air compresser
Answer:	Hello James, Yes this is a yoke system but can be converted into Din with a kit. Hope this helps.
Question:	can i use this with a hookah or air compressor (low pressure air system
Answer:	Nothing

Product description

Looking for a BCD and regulator package for the summer dive season that is high quality and economically priced? The Cressi Solid Scuba Package is just what you're looking for. The Solid BCD is a fantastic Jacket style BCD that provides plenty of lift. This durable BCD has two zippered pockets and multiple D-rings for storage and attachment of accessory items with two 1" (25mm) techno polymer D-rings on the pockets. The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. If used at dive facilities a size indicator is highly visible on the right shoulder. BCD adjustable sternum strap along with both 2" (50mm) torso adjustment straps and waist strap are all equipped with squeeze-style side-release buckles for easy donning and doffing. The light-weight back support is rigid for proper cylinder stability but is fully padded for comfort and the ridged backpack is equipped with a grab handle for easy transport and gear donning assist. BCD is built to last made from 500D Cordura (exterior part) and 420D nylon (interior). The Cressi Solid BCD has the following lift capacities according to size: XXS 17.6 lbs. (8 kg), XS 26.5 lbs. (12 kg), SM 30.9 lbs. (14 kg), MD 35.3 lbs. (16 kg), LG 41.9 lbs. (19 kg) and XL 48.5 lbs. (22 kg). The Cressi Solid BCD come with a 3/8" t

• BCD, 1'st-Stage, 2'nd Stage, Octopus, Low-Pressure Hoses, Pressure Gauge, HP Hose, Owner Manuals
• Cressi Solid Scuba Package
• Complete Life Support BCD & Regulator System
• Jacket Style BCD
• BCD Available in Multiple Sizes

User questions & answers

Question:	Is this a good package for someone just getting ready to take lessons and get started in diving
Answer:	Jana,The first stage is included with this product. It is included with all primary second stages. The alternate air source regulators do not include the first stage.-MontseSugar Land Dive Center
Question:	Does this package come with a pressure gauge? It is listed only in the description
Answer:	Not without an adapter. Poseidon regulators have M31-1.5mm threads on the second stage and these quick connects only work with the standard 3/8” threads.
Question:	Does it include hose to inflate BCD
Answer:	It will only work on an LP regulator hose. You will need to get a high pressure quick disconnect. Feel free to contact us to get the correct one for your model
Question:	Does this have the integrated weight system
Answer:	Excelente producto 👍🏻

Product description

You can now get a complete primary and backup scuba air delivery system in one package, and it's only available at Amazon! Decor has put together a complete air delivery system exclusively for West marine. The pacer plus X6 air delivery system (ads) is tested, pre-tuned and fully assembled. Included is a chrome-over-brass first Stage Regulator, primary second Stage Regulator, octopus (alternate air source), quick disconnect buoyancy compensating device (bed) hose, octopus clip, gauge clip and an analog tri-gauge with pressure, depth and Compass. Decor has managed to pack all this gear neatly in a high quality, water-resistant tarpaulin Regulator bag for easy travel. All you have to add is an air tank, wetsuit, mask, fins and a bed and you're ready to dive! why is the pacer plus X6 air delivery system so incredible it has everything needed to deliver air for most recreational diving, there's no need to shop around for all the pieces and parts you need so you can spend your time in the water rather than looking for just the right part to complete your system. Everything fits together like it was made to fit together! that's because everything was. Nothing is left to chance. Factory technicians have safety tested each piece, tuned it as necessary and assembled the complete system to ensure that everything works as intended right out of the box.

• Includes: Decor Nautica xvi weight integrated BCD, pacer Plus X6 regulator system, spare-air 3000 3.0 kit, sea R3 400 Lumen LED dive light, mares universal hanger
• Durable jacket style buoyancy control device with hard backpack for stability, rugged 840 denier nylon material for durability and long life
• Balanced diaphragm, tested, pre-tuned and fully assembled. Chrome-over-brass first stage regulator, primary second stage regulator
• Spare air 3.0 kit: allows quick and easy refills from scuba tank, redundant alternate air source for safety, helps assist rescue and self rescue, refillable back up system, Small and easy to use
• R3 LED ultra bright scuba diving light: brightness: 400 lumens, operating modes: light intensity adjustable using magnetic switch, beam: Zoom adjustable, from 12 degree to 75 degree