10 best dewalt 18 volt finish nailer

Product description

This product features a 20-Degree finish nailer, bump operating mode, and integrated LED lights as well. It is convenient and works effectively. It is definitely a great quality product.

• Integrated LED lights
• Bump operating mode
• 20-degree finish nailer
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Is it brushless
Answer:	I believe that it is brushless. I have 2 of the nail guns and they are great. Works fast and sets the nails ever time. Battery lasts a long time as well.
Question:	Just got the nail gun. somehow it jammed as soon as placed brads in it. it seems to flip the brad. how is that possible? not happy i'm wasting brads
Answer:	Ummm, yes, this is a finish nailer, big difference from a brad nailer. Make sure you are using 16 gauge 20 degree nails, not 15 gauge, and definitely not 18 gauge brads. This is a great nailer, but I'm not tossing out my Bostitch air nailers to replace it! This is a great supplement to the air nailers for small jobs that only last a day or so.
Question:	Have they sorted out the Low nail depth issue yet? After some use my contractors say it wont Drive 2-1/2 nails
Answer:	This is my second Dewalt finish nailer and I have never had any issues with it not driving 2 1/2" nails. That being said, if you are driving several 2 1/2 nails then you need to make sure you are working with a fully charged battery. I have noticed that if the battery gets to a 1/3 charge it will not drive 2 1/2" nails as deep. It also depends on the type of wood (hard or soft).
Question:	Can this be used for blind nailing tounge and groove paneling
Answer:	Yes but don't waste your money if you plan on using this gun a lot. I've had mine in the shop 3 times in the year I've owned it. Buy the 18 volt version is more powerful and breaks way less. I've used mine for the last 6 years at least. This new gun will not even drive 2 1/2" nails consistently through soft wood let alone any hard wood.

Product description

This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box

• AirStrike Technology provides cordless convenience, eliminating the need for a compressor and bulky air hose
• Toolless depth-of-drive adjustment helps protect work surface and allows proper setting of finish nails
• Dual chemistry charger charges 18V ONE+ batteries in as little as 1 hour
• Indicator lights show status as batteries are charged and maintained
• This item is removed from retail packaging for shipping purposes (Bulk Packaged, No Retail Packaging) and will arrive in a generic shipping box

User questions & answers

Question:	Will my 16-guage finish nailer shoot 18-guage brads
Answer:	No, just a fully charged battery and lots of 16-gauge finish nails.
Question:	will this shoot staples
Answer:	There are a few numbers on it. Most likely the part# is P102. But there’s also a 130429135 that could help.
Question:	Does this product require any other items to make it work -- i.e. cartridges of any kind
Answer:	Yes on the amperage but I have no idea about the warranty.

Product description

The DEWALT DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• Diagnostics with LED indicator Communicates battery charge status: charged
• Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
• Automatic shut-off protects excessive discharge of vehicle's battery
• *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

User questions & answers

Question:	Can I use this for trim
Answer:	I plan to use mine for trim shortly (shorter nail). Used longer nail for 3/4" pine tongue and groove wall. Love the product.
Question:	How many finish nails does one battery fire? I know the battery size will influence the number significantly but is it closer to 150 or
Answer:	I use mine all day and on a fresh battery it will go the distance. I have never felt like the batteries were an issue vs amount of nails shoot
Question:	Will this gun shoot staples also
Answer:	no 1 1/4'' to 2 1/2 15ga finish nails only.
Question:	Does this include the battery, charger and bag
Answer:	Yes, It includes both

Product description

The new DEWALT DWFP12231 18 gauge, 2-Inch Brad Nailer Kit is an excellent tool with many enticing qualities. It features a long life maintenance-free motor to keep from staining the work surface. The magnesium body delivers a strong and lightweight design. It also features a tool-free depth -of-drive adjustment with detents for proper setting of nail heads, along with a tool-free jam release mechanism for easy nail removal. The rear exhuast helps to keep contaminates away from work. This unit is made to drive 18 gauge nails from 5/8" to 2" in length, with a sequential style trigger, and 100 nail magazine capacity. This unit has a removable non-marring nose tip with on tool storage, and an integrated rubber grip for improved comfort and anti-slip grip. It also has an adjustable belt hook which allows the tool to be kept near the user. This kit also includes carrying case and owner's manual. Refer instruction manual before use. A compressor is required and not included.

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work. Operating pressure 70 - 120 psi
• Drives 18 gauge nails from 5/8" to 2" length. Power Source: Pneumatic. Power Tool Type: Pneumatic. Note: There are no nails included
• Compressor is required to use this product but is not included

User questions & answers

Question:	Can someone recommend an air compressor that would power this nailer? I don't know a lot about tools and don't want to buy larger than i need
Answer:	: A Husky 4 gallon portable will run three of these nailers. I believe it cost me $250.00. It's pretty quiet. Both of these cost less than a battery one
Question:	What is the difference between 18 gauge brad nailer and 16 gauge finishing nailer? I need to install trim, build bookcase and install decking floor
Answer:	Brad nails are formed from a fine 18 gauge wire, while finish nails are made from heavier 16 or 15 gauge wire. Finish nails are the correct choice for fastening larger crown and baseboard trim, brad nails are used to install smaller trim to help prevent splitting and to promote a cleaner looking job with less touch-up work after the nailing is done.
Question:	Would I need to purchase anything else (battery) in order to use? I know absolutely NOTHING about power tools
Answer:	Hello, Thank you for writing ACME Tools. The DWFP12231 Brad Nailer is a Pneumatic tool so you will have to use an Air Compressor and a hose with the proper fittings. Other than that, this unit is very straight forward and easy to use.
Question:	what is the voltage
Answer:	The voltage is 765 kV and it is also powered by two Siemens & Halske alternators rated 30 hp (22 kW), 2 kV at 120 Hz and uses 200 series-connected Gaulard 2-kV/20-V step-down transformers provided with a closed magnetic circuit, one for each trigger. Hope this helps.

Product features

DEWALT DWFP12231 18-Gauge 2-Inch Brad Nailer Kit

Product description

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability. Kit includes: DWFP12231 18 ga Brad Nailer, DWFP55126 Compressor, Air hose with fittings, sample fasteners, and owners manual.

• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI
• Tool-free depth-of-drive adjustment and tool-free jam release
• Low 75.5 dBA for a quiet work environment
• Kindly refer user manual for instructions.
• DWFP12231 Brad Nailer drives 18ga nails from 5/8" to 2" length.
• DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI

User questions & answers

Question:	what is HP
Answer:	These products are not rated in HP.
Question:	Can i use 200 feet of air house will the compressor take it
Answer:	It's not advisable to use such a long air hose, even if it would work. It would be useful to inquire about a long electrical extension that would go at least half way. A qualified electrician could shed some light on this (pun intended). I wouldn't do either; there is some risk in running electrical wire or an air hose under pressure such a long distance.
Question:	Is this good for crown molding and flooring installs with it support for what I am looking to do
Answer:	Ideally you will want a finish nailer for crown molding work. Please contact DEWALT at 1-800-433-9258 for further assistance.
Question:	What is the length of the included hose
Answer:	I haven't measured it but I'm thinking it's probably a 25'

Product features

DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit

The DEWALT DWC1KIT-B Brad Nailer and Compressor Combo Kit features a DWFP12231 18 GA brad nailer, and a DWFP55126 compressor. The Brad Nailer drives 18 gauge nails from 5/8" (16 mm) to 2" (50 mm) length. This nailer offers a long life, oil-free motor with a tool-free depth-of-drive adjustment with detents for proper setting of nail heads. It also has a tool-free jam release mechanism for easy nail removal. The rear exhaust to help keep contaminates away from work, and a magnesium body delivers strong & lightweight design. It also has a removable non-marring nose tip with on tool storage, and an adjustable belt hook that allows the tool to be kept near the user. The Air Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI for long tool runtime and fast recovery (Tested per ISO 1217). The durable oil-free pump provides long maintenance-free operation, and a low 75.5 dBA for a quiet work environment (Tested per ISO 3744). The low 10 Amp draw motor starts easily in cold weather or with extension cord, and it has two regulated, factory installed air couplers to easily support two users. Shroud includes heavy-duty handle, cord wrap and console cover to make unit easy to carry; only 30 lbs (13.6 kg) for easy portability.

Kit Includes:

Product description

Precision point technology: easy nail placement as a result of a smaller nose compared to current DeWalt nailers and No need to compress the contact trip to actuate the tool. Kit includes: nailer, 1/4" swivel fitting, sample finish nails, carrying case and extra no-mar tips.

• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Rear exhaust to keep contaminates away from work
• Drives straight 16ga finish nails from 1-1/4" to 2-1/2" length
• Tool-free jam release mechanism for easy nail removal
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is this gun supposed to prevent dry-firing when you run out of nails? If so, mine does not work
Answer:	Yes it comes with 1 battery and a charger
Question:	Where can you buy the yellow plastic bumper tips
Answer:	Yep
Question:	Description states it's "corded - electric," but the picture shows a pneumatic fitting. So, is it electric or pneumatic
Answer:	It needs both but don’t buy its100% trash it struggled to fire the 2 1/2 inch nails it lasted maybe 60 nails cleaned it but never came back to work trash trash trash don’t buy buy the paslode guns
Question:	Can you buy tips
Answer:	Yes, the nails are within the range to be compatible. The nail collation of a "DA" angle is 34 degrees.

Product description

The DEWALT DWFP72155 15 GA PrecisionPoint™ "DA" Style Angle Finish Nailer drives 15 Gauge DA style nails from 1-1/4 in. to 2-1/2 in. making it ideal for interior trim, baseboards, crown molding and more. With its 16 in. On-center gauge to measure exactly 16 in. from end to nose, and PrecisionPoint™ technology for precise nail placement, this tool is ready to work.

• Precision Point™ Technology: Precise nail placement due to a smaller nose, compared to current DEWALT nailers, and no need to compress the contact trip to actuate the tool
• Long-life, maintenance-free motor helps to keep from staining the work surface
• Tool-free jam release mechanism for easy nail removal
• Tool-free depth-of-drive adjustment for proper setting of nail heads
• Selectable trigger: sequential or contact actuation

User questions & answers

Question:	Is the nail recommended for this tool easy to find, is there troble in finding nails for this tool
Answer:	"DA" angled finish nails are 35 degrees.
Question:	Is it a pneumatic tool
Answer:	Yes, because these nails are DA-style (34° angle), just like the Bostitch btfp72155.
Question:	Is the dewalt dwfp72155 15 gauge a 34 degree nailer
Answer:	Traditional Bostitch's FN style (25 degrees) is unique to its brand. However, the newer Bostitch DA style (34 degrees) of finish nailer will work with the corresponding angled finish nails.
Question:	What about recoil
Answer:	I would call a local tool repair shop. Unless you acsess the parts detailed list online at Hitachi website.

Product description

The DEWALT Electric Multi-Tacker loads a variety of staples and brads from heavy duty, narrow, cable, 18-Gauge brads and 18-Gauge headless brads. Due to the variety of staples and brads that the Electric Multi-Tacker is compatible with, there are numerous applications for this tool such as installing carpet, installing sheets of insulation and attaching lightweight trim using the brads, to name a few. This tacker is bottom-loading and makes loading user-friendly

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Does anyone have an operators/owners manual? can you share it
Answer:	Sam's Dad. You realize that 5/8" is equal to 10/16" which is 1/16" larger than 9/16"; I wonder how your 9/16 did not fit but 5/8 did?
Question:	can it use 1.5 inch braid nails
Answer:	what size brads does it take
Question:	Can this use 1 inch t-nails
Answer:	Yes, this would work for chairs, upholstery - the staple size would allow for that. Also, the tension pressure is string enough to get through the fabric.
Question:	What size nails will it take
Answer:	No longer includes ANY staples at all.

Product description

The DeWalt DCA16200 2-Inch 16 Gauge 20-Degree Angled Finish Nail are manufactured out of cold-worked carbon steel and galvanized in a "hot-dip & quot; process, which ensures that each nail will resist rust and moisture. Ideal for finish work, these 2-inch 16 gauge nails are for use with DeWalt Cordless Angled Nailers and packaged in quantities of 2,500.

From the Manufacturer

The DeWalt DCA16200 2-Inch 16 Gauge 20-Degree Angled Finish Nail are manufactured out of cold-worked carbon steel and galvanized in a "hot-dip" process, which ensures that each nail will resist rust and moisture. Ideal for finish work, these 2-inch 16 gauge nails are for use with DeWalt Cordless Angled Nailers and packaged in quantities of 2,500.

• Two-inch, 16-gauge, 20-degree angled finish nails
• Cold-worked carbon steel and galvinized in hot-dip process
• Nails resist rust and moisture
• Consistent drivability for applications
• Ideal for finish work

User questions & answers

Question:	Do these Fit senco nailer
Answer:	It will drive wire collated nails from 1" to 2" with a shank size no larger than .093. If that is what you mean by regular nail, then yes it does. For what it does, it is a really good nailer. More questions, give us a call.
Question:	Can these be used for exterior finish work
Answer:	Any lumber yard or home improvement store should have coil nails to fit this gun.
Question:	Will these nails work for installing James Hardy siding
Answer:	Yes

Product description

The DEWALT DCN680 18 Gauge Brad Nailer drives 18 Gauge brad nails from 5/8 in. to 2-1/8 in. which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery the DCN680 is ready to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. * - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.

• 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
• Brushless motor maximizes runtime and durability
• Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
• Tool-free depth adjustment for precise countersinking of nails
• Tool-free jam release to quickly and easily clear nail jams

User questions & answers

Question:	Where do I get the end tips at
Answer:	That no-mar tip, as it's called, is no longer available. https://www.ereplacementparts.com/dewalt-dcn680b-type-20v-18ga-brad-nailer-parts-c-1009_1165_567196.html
Question:	Is the 20v battery included
Answer:	No, the battery was not included.
Question:	What is max nail length
Answer:	The Dewalt brad nailer shoots brads from 5/8” up to 2-1/8”. Hope this helps.
Question:	Does anybody know which dewalt nailer would be a good all around gun for trim to framing in one
Answer:	Unfortunately, there is no such gun made. By any manufacturer. A nail that would be strong enough for framing, would absolutely destroy trim pieces.