14 best longboard bearings

• 100% SATISFACTION GUARANTEED - We promise you will be stoked on this or your money back.
• INCREDIBLE SPEED - Bones Reds are some of the best bearings in the world for a reason, they're awesome!
• BEARING SIZE - Bones Bearings are bearing size 608, which measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle).
• PRECISE SPACERS - Unlike most spacers, each Dragon Spacer is precision cut for extremely tight tolerances of +/- 0.02 mm. The width is 0.405”(10.29 mm) and designed for 8mm axles.
• STOKED TOOL - Each tool has a 9/16" (kingpin), 1/2" (axle), and 3/8" (hardware) Sockets, 1/8" Allen and #2 Phillips Driver and made from hardened steel with a chrome finish.

User questions & answers

Question:	Will these work on spitfire formula four lock-ins 53mm wheels
Answer:	Its now optional. Click the dropdown menu under size to choose whether you want bears with spacers/washers.
Question:	Will these work on a penny board
Answer:	spacers vary but it should still work
Question:	Does it come with the washers
Answer:	Yeah, but remember you'll need two boxes for a set of skates
Question:	Will these bearings work on 80mm wheels
Answer:	Hi, Thank you for your interest with Bones Reds. 608 bearings measure 22mm (diameter) x 8mm (inner diameter) x 7mm (width). Please feel free to contact us with any other questions or concerns. Thanks, David

Product description

The standard by which all other bearings are measured. High speed. Set of 8 Bearings. This bearing is not 'ABEC' rated. Imported. Spacers, washers, and speed cream included.

• Bestselling skate bearing brand in the USA
• Single, non-contact, removable rubber shield for easy cleaning and less friction; high speed nylon ball retainer for greater strength and speed
• Includes set of eight bearings, instructions, and logo sticker
• Includes 4 spacers and 8 washers

User questions & answers

Question:	Do i need spacers and washers or can i just buy the bearings by themselfs
Answer:	No
Question:	Do these fit on any longboard, would they work with https://www.amazon.com/gp/product/b01mu91kta/ref=oh_aui_detailpage_o00_s00?ie=utf8&psc
Answer:	These should fit into almost any size wheels as almost almost all wheel cores fit a standard sized bearing!
Question:	Do they work good on the street
Answer:	These are fast on a skateboard or roller skates. Note that this is for a 16 pack, or enough for 8 wheels. You could use 1 of these to replace 2 skateboards worth of bearings. Your 5-star satisfaction is our #1 priority. Please feel free to contact us with any other questions or concerns. Thanks, David -- Stoked Ride Shop (310) 462-9991 [email protected]
Question:	Can this be cleaned with a mass air flow sensor cleaner as well
Answer:	The shield is rubber so if you aren't careful you can damage it, but it is easy to remove and replace.

• HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Electric Skateboards, and has the highest precision in the market.
• PRE-LUBRICATED WITH HIGH SPEED RACING LUBE: Ultra-Fast Lube for Guaranteed High Speeds and minimal friction. Yellow shield seals lubricant inside bearing and wheel
• ENGRAVED COLOR SEALS FOR PROTECTION: Cool engraved colored seals for bright colors and protection from dirt, rocks, dust, to lengthen the life of the bearing and maintain precision
• TOP QUALITY AT LOW END PRICES: Yellow Jacket Bearings are built for racing and durability at a fraction of the cost. Hand inspected before packaging to ensure highest quality for customers
• HASSLE-FREE MONEY-BACK GUARANTEE: Designed to last longer than any other bearing on the market. If for any reason you are not 100% satisfied, please return your Yellow Jacket Bearings for a no-questions asked, full refund

User questions & answers

Question:	Do these fit roller skates ( premier fo-mac Wheels
Answer:	Not familiar with those specific wheels, but these fit standard skateboard as well as inline skate wheels (I use them on my Reebok inline hockey skates).
Question:	How do people get 2:30 spin times with these bearings? I got them and they only spin for 30 seconds. Several reviews said that they got 2:30 spin time
Answer:	Wayne. It really depends on how hard you spin the spinner and the type of spinner you are using. Our recommendation to customers is to use ceramic bearings in spinners. Good news is our fidget spinner bearings are being release this week on Amazon so please check back on Wednesday for them and they will for certain spin even longer.
Question:	Are they made in usa
Answer:	They are not
Question:	How well will these work for fidget spinners? And when are you going to launch your line for fidget spinners? I am highly interested in those
Answer:	Ryan. In the best interest of our customers I would recommend using a ceramic bearing if it is for the middle of your spinner. Ceramic has a lower friction coefficient so it should spin longer. If you were looking for some different color bearings for the outside of the spinner as weights I would absolutely recommend these yellow jacket bearings. We plan to release a set of yellow jacket fidget spinner bearings in about 45 days so please check back.

• ULTRA SMOOTH, ULTRA-FAST – These precision skateboard bearings are pre-lubricated with special lubricant to make the fastest, smoothest bearings out.
• UNMATCHED PRECISION DESIGN – Heady Shake bearings for skateboards offer a quiet rotation, high-spinning speed, and long-lasting durability for more efficient support.
• BLAZING SPEEDS FOR ALL YOUR GEAR – These top-quality bearings can be used for a variety of skates, including inline and roller skates, longboards, skateboards and kick scooters.
• HIT THE SKATE PARK IN STYLE – These inline bearings don’t just boast sleek, skater-friendly designs, they come complete with 8 professional-grade bearings, 4 skateboard spacers, and a waterproof sticker.
• GUARANTEED SATISFACTION – Heady Shake longboard bearings are backed by superior craftsmanship, reliability, and a true satisfaction guarantee. We’ll refund your money 100% if you aren’t completely happy.

Product features

Pre-Lubricated with Premium Speed Oil

We’ve pre-lubricated each bearing to give you maximum ride support right out of the box and to reduce the amount of effort it takes to replace old bearings and get on the road.

Be Prepared For Serious Sessions

Crafted with heavy-duty, ultra-precision titanium, our skateboard bearings with single-side sealed rubber shields are far better than standard bearings or generic replacements.

Reinforced Design For Gnarly Ride

These premier skate bearings and not only sleek and easy to install, they’re easy to clean thanks to a non-contact removable rubber shield that causes less friction.

Strong, Reliable Precision

These versatile skate bearings are pre-lubricated to ensure a smooth rolling design, work efficiently with a wide range of skate products, and instantly give you more stability, control and reliability than standard bearings.

Versatile Compatibility

Our Heady Shake professional skate bearings offer premium versatility! In fact, they work with a wide range of today’s top equipment and brands, including skateboards, longboards, inline skates, and even kick scooters.

Complete 8-Piece Skate Set

Every order comes with everything you need to replace old, worn out or stock bearings on your board, including eight 608 RS skate bearings complete with matching skateboard spacers. This makes them ideal for riders of all skill levels.

Product description

Bones Reds are near Bones Swiss performance at a fraction of the cost. They offer the greatest combination of performance, durability and low cost in the industry. They are the best selling skate bearing brand in the U.S.A.

The bestselling skate bearing brand in the USA, Bones REDS are manufactured to Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings possible. They are thoroughly inspected before being shipped, and offer an outstanding combination of performance, durability, and low cost.

Features

• Single, non-contact, removable rubber shield for easy cleaning and less friction
• High speed nylon ball retainer for greater strength and speed
• Pre-lubricated with Speed Cream racing lubricant
• Skate Rated clearances, tolerances, materials, and lubricant

What's in the box?

• Set of eight bearings
• Instructions
• Logo sticker

• Bestselling skate bearing brand in the USA - BONES know interludes the SKATE RATED sticker on most of there packaging to help prove authenticity of the bearings received. If your bearings do not come with this sticker contact bones directly for help.
• Single, non-contact, removable rubber shield for easy cleaning and less friction; high speed nylon ball retainer for greater strength and speed
• Pre-lubricated with Speed Cream racing lubricant
• Skate Rated clearances, tolerances, materials, and lubricant
• Includes set of eight bearings, instructions, and logo sticker

User questions & answers

Question:	Do Reds still come with bearing spacers
Answer:	If you order from our store, they will be a genuine product. We are an Authorized Dealer for all Bones products. Your 5-star satisfaction is our #1 priority. Please feel free to contact us with any other questions or concerns. Thanks, David -- Skateboards R Us (310) 462-9991
Question:	Can I use these on my Kryptonics 22.5 inch deck and use the spacers that came with the board? It came with abec-5 sealed grease speed bearings
Answer:	Yes these will fit. However, this is a 16 pack and for a skateboard you will only need an 8 pack. Let us know if you have any other questions or concerns. Thanks, Skateboards R Us 310-462-9991
Question:	Do these fit in roller derby skate wheels as well
Answer:	Hello,Thank you for your interest!These are 608 bearings, which are standard for this industry.Thanks,Customer Service
Question:	What is the diameter
Answer:	608's are 8mm.627's are 7mm.These bearings are the best that you can buy for the money. All the moderate competition folks at the rink use them. I have them in my skates, and so does my son.

Product description

As one of the emerging brands, KVENI always adheres to the original quality.

KVENI skateboard bearings have always beenaimed at high speed, lubrication and penny.

We believe that in future, KVENI can be known by many people.

KVENI skateboard bearings will be your perfect companion that sliding on the road.

The KVENI skateboard bearing is made of advanced Chromes steel and 608rs ceramic balls.

Precise 608RS ABEC 9 chrome steel rims and ceramic ball bearings pre-lubricated with high-speed bearing oil,

durable nylon retainers for absorbing repeat impacts, and removable rubber metal shields for easy cleaning.

The inner part of the skateboard bearing is made of racing car lubricant, which makes the bearing rotate faster and quieter.

The red cover makes the skateborad bearing look cool and easy to remove and install.

Our bearings are widely used in skateboard, scooter, professional skateboard, fingertip baubles and so on.

• 1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality Chrome steel and ceramic ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling.
• 2.PRECISION FITMENT: The red skateboard bearings size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard ceramic bearings). Able to fit perfectly with most of the wheels on the market.
• 3.SCOPE OF APPLICATION：KVENI ceramic skateboard bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more.
• 4.BLUE UNIQUE COLOR SEALS:This waterproof skateboard bearings easy to disassemble and clean and protection from dirt, rocks, dust, Pre-lubricated with racing lubricant to lengthen the life of the bearing and maintain precision.
• 5. AFTER-SALE SERVICE：If your skateboard bearings have any quality problems, please contact us via Email, we will offer you hassle free replacement or money back during the week. Fast delivery and 100% satisfaction guarantee, friendly customer support for you.

User questions & answers

Question:	Can these skateboard bearings be used in my inline skates
Answer:	This is a standard 608 sized bearing, aka "skateboard" bearing. That is 8mm ID, 22mm OD, & 7mm width.
Question:	How long does it take to break them in
Answer:	Hi Michael, Thank you for your interest with Dragon Bearings. Yes, the bearing size is 608 and measures 22mm (diameter) x 8mm (inner diameter) x 7mm (width).Please feel free to contact us with any other questions or concerns. Thanks,David
Question:	How many skateboard ceramic bearings are in the box
Answer:	Hi, Thank you for your interest with Dragon Bearings. ABEC ratings are not relevant in any skating application. Allow me to explain. ABEC is a scale for tolerances. The higher the ABEC number, the more precise the bearing is. At the onset, this sounds relevant. However, ABEC ratings are most useful when comparing bearings in a low load and very high RPM (revolutions per minute) environment. Skateboarding, scooters, and roller skates are high load, low RPM. Because of this and the exposure to dirt, water, etc makes ABEC ratings lose their relevance as soon as your wheels hit the ground. Frankly, skate companies have used ABEC scales just to create price tiers of products. While the bearing quality might be better at a higher ABEC rating, it is wrong to assume a higher ABEC rating means a better bearing. It is much more important to look at the brand reputation, the type of lubricant used, and the bearing shield style. These features will make a huge difference. Dragons are lubricated with either light grease (ENDURE) or oil (RACE) and have very good shield seals. They were skater designed and tested. Dragon promises 100% satisfaction. We hope this helps. Please feel free to contact us with any other questions or concerns. Thanks,David
Question:	Do these come with spacers
Answer:	Hi, Thank you for your interest in Dragon Bearings. Yes, Dragon Bearings will work in your Razor A5 Lux Scooter. Your 5-star satisfaction is our #1 priority. Please feel free to contact us with any other questions or concerns. Thanks, David

Product description

- The unique feature of our lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. - This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time. - The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities. - Extremely low water washout. - Corrosion on the inside of the bearing is nearly eliminated.

• Precision 8mm axle holes
• 0.5mm built in speedrings
• Green rubber seals to keep dirt and debris on the outside of the bearing
• Lubed with Archoil Nanoceramic Grease

User questions & answers

Question:	Would these fit standard roller skate wheels
Answer:	Most likely yes, but please measure the inside of the hub. If the spacer part is wider than 10.2mm, then these bearings will not work. Your 5-star satisfaction is our #1 priority. Please feel free to contact us with any other questions or concerns. Thanks, David -- Stoked Ride Shop (310) 462-9991
Question:	Just got the bearings but they’re slow than described. Do these bearings need to break in so they can roll for much longer
Answer:	They do need to be broken in. Zealous were designed to be downhill bearings and they break in very quickly at speed. It will take longer to break them in pushing. Once they are broken in they are amazing. They hold the track record at multiple venues around the world and are the go to choice for many downhill racers.
Question:	Because of the built in spacer will i still be able to pop the bearings out with the axle
Answer:	I use the Swiss bearing puller which is easier in my opinion, but the answer is yes. BTW, ZEALOUS IS A GREAT BEARING! My son has about 10 longboards which leads to constantly cleaning bearings. As you probably know zealous bearings are sealed on both sides, stay clean, ride great, improve sliding wheel, and are basically made to use and throw away in about 1 yr. I'll never clean another bearing! There are a few wheels that these do not fit due to spacer depth, but very few and they do offer another version for those narrower wheels. Good luck, you will not be sorry you purchased zealous.
Question:	How do these compare to the bones ceramic super reds, or the pacific flyers silicon nitride ceramic bearings? do they need less maintenance/cleaning
Answer:	with zealous they are a lot slower than what you ceramic bearings. The major benefit is that they stay clean and is a more long-term

Product description

Most Skate One Corp. products are made in the USA at our own factory in Santa Barbara, CA. With over 35 years of experience, we use our superior technologies, top quality materials and proven procedures, to build the very best skateboard products in the world. Our brands include Powell-Peralta Skateboards, BONES Wheels, Bones Bearings, these wheels, POSITIV Skateboards, Mini-Logo Skateboards, hoopla skateboards, Area trucks and Golden Dragon Skateboards.

• Skate One has been a manufacturer & distributor of high performance skateboarding equipment and clothing since 1976
• Designed by professional skaters. Made in the U.S.A
• All Skate One Corporation products come with a warranty

User questions & answers

Question:	Will these fit my formula four wheels
Answer:	Yep, they fit all skateboard wheels. But I do have them in some formula fours
Question:	Are the used just as the new ones
Answer:	Yes they're the same size and go in the wheels the same way. They just have a built in spacer, so you don't have to worry about using spacers. They're pretty good bearings but I would probably just go with regular reds. Good luck!
Question:	What is the purpose of the mushroom look
Answer:	There speed racers those " mushroom " are actually called speed rings meant to make the whole wheel go faster
Question:	Will these fit 56mm bones rough riders
Answer:	They should fit any wheel tbh I have them on sector9 race formula wheels which are 72mm I believe great ride real smooth and glides

Product description

This unique design features six larger diameter balls of 8mm instead of seven. The advantage is higher speed, quicker acceleration, greater strength and durability

• Unique bearing design with six larger balls of for increased speed, faster acceleration, and greater strength
• Single, non-contact, removable rubber shield for easy cleaning and less friction; pre-lubricated with Speed Cream
• High speed nylon ball retainer for greater strength and speed
• Skate Rated clearances, tolerances, materials
• Lifetime warranty against manufacturing defects

User questions & answers

Question:	Are they good for fidget spinners
Answer:	I would imagine that they would be. These are very good bearings as are the standard bones Swiss. And since they won't see as much dirt/dust in a fidget spinner, they'll last forever with little to zero maintenance.
Question:	Some Bones bearings are from China. Others are not. Where are THESE specific bearings manufactured
Answer:	all bones bearings come from china
Question:	Is this listing for an 8 pack or 16 pack of bearings? What mm are they
Answer:	8 pack. Enough for a single board (4 wheels), standard 608 (Outer diameter of 22 mm). While far from an expert on inline skates, as I recall, most are 608 fitting for the wheels even on skates. As the previous reviewers mentioned, it'll be two packs for skates. Seeing as these aren't ABEC (deeper rails and the unusual count of 6 ball bearings), made from stronger steel than the cheap chinese, they'd probably work well for inline skates as well.
Question:	Can these be used in longboards as well? I'm not sure if there is a different size
Answer:	Im pretty sure you can these are 608 in size just like many other skateboard bearings

Product description

BESIY 608 2RS Skateboard Bearing

Features

Carbon Steel Material

Double Rubber Sealed for lubrication

Single-Row Bearing

Package Included: 8 Pack

Specification

Inner Diameter: 7mm

Outer Diameter: 22mm

Height: 8mm

Application

Moderate Load Use: skateboards, inline skates, scooters, roller etc

User questions & answers

Question:	my daughter ordered the bearings and got six how does she get the other
Answer:	Yes, it would work fine. However, the hose is not very long for you to use when it would be setting so low. It would be easy to extend the hose with some extra hose and fittings. You might look around and see if you can find an electric sprayer on wheels. I really like the sprayer for my purposes. I've probably sprayed over 40 tanks now and it is working great.

• ABEC-9 608RS Universal High speed Skateboard Bearing, 7x8x22cm
• No Noise, wear resistant, smooth and fast ride.
• Durable Cr Mo steel Bearings, long last use.
• Universal for skateboards, longboards, roller skates, inline skates, electric skateboards etc.
• Double side black cover, dust proof, long lasting use.

User questions & answers

Question:	Are these bearings water resistant
Answer:	They are sealed bearings, there for I would say water resistant, but not water proof.
Question:	What is the difference between 608zz and 608zb? old ones are 608zz
Answer:	The zb and zz has to do with how the bearings are shielded. ZZ is typically sealed on both sides of the bearings not allowing maintenance of the bearings as it should not really be needed. The sealed bearing will run a little slower as they typically use grease instead of oil as a lubricant to help keep debris out of the bearings.
Question:	Are these from china
Answer:	Probably!! Not sure of where the location is where they come from but probably China
Question:	Tengo unos roller skates con ruedas 77,5 mm 78A , me gustaría saber si estás LE son compatible perfectamente
Answer:	Si son compatibles exelente

• SMOOTHER RIDE: Set of 8 Oldboy ceramic bearings are heavily lubricated to resist drag. Break them in with a few gnarly rides, then experience a new level of smooth
• EXTENDED LIFE: Super hard ceramic balls are pre-lubricated to reduce friction and prevent wear and tears. Perfect for slalom skating, bombing hills, or long-distance cruising
• BETTER THAN STEEL: Don’t settle for metal bearings that promise a long spin time right out of the box, but are prone to rusting and are easily scratched by dirt. Oldboy ceramics are made with indestructible polished glass balls. No worry about rust or damage from dirt with ceramic balls
• LUBE PROTECTED: Heavy lubrication prevents wear and tear, resists damage from water, and helps keep nylon bearing cage from cracking. No matter how fast and hard you ride, these bearings will let you perform like a pro
• OLDBOY SWAG: You get TWO gnarly stickers inside every pyramid-power box (patent pending)

User questions & answers

Question:	Abec-11 is a brand name, not a standard. what is the actual abec raiting
Answer:	Most ceramic bearings dont get rated on the abec scale, however, they are usually around abec 9 metal bearings or better in my experience.
Question:	will this fit the boosted board mini s
Answer:	They're standard 22 OD x 8 ID x 7Wide mm skateboard bearings so if that board takes standard size bearings they would fit. That's probably the case, but you could contact Boosted to make sure... They're great bearings.
Question:	Are these 8mm or 7mm? I want to know if they fit my quads
Answer:	The Oldboy Ceramic Bearings measure 22 x 8 x 7mm.
Question:	Are the outer and inner rim rust proof or is it normal steel
Answer:	The outer and inner rim are steel so you may get some rust if you ride in wet weather a lot. If a set rusts out let our support know and we will replace them no problem.

Product features

PYRAMID POWER

Oldboy Ceramics are the only bearings packed in a pyramid box for good vibrations. It looks so good we patented the design. United States Patent No. D896,628

EXTENDED LIFE

Super hard ceramic balls reduce friction and prevent wear and tear at high speeds.

Perfect for slalom skating, free boarding or long distance cruising.

Fits scooter, inline, quad or hockey skate wheels, but are designed for skate and longboards.

EASY MAINTENANCE

One shield design for easier cleaning. No need to pry open a shield when cleaning or adding lube.

LOVE THE FEEL

SMOOTHER: Oldboys are Loaded with Lube for a longer lasting, smoother ride. Break them for a few days then experience a new level of smooth.

Face it. You get what you pay for. Cheap metal bearings are a drag.

Premium ceramics maximize your enjoyment of the sport.

BUYER'S GUIDES PICK OLDBOY

THUMBS UP: Oldboys are a growing favorite in the skate community. Search "best ceramic bearings for longboards" and find 15 Buyer's Guides that now recommend Oldboys as the best ceramics on the market.

No Bones about it. Oldboys are better.

SCIENCE BASED FUN

SPECS: 608RS ZrO2 -- 7 x 22 x 8 mm (standard 8mm bearings).

SUPER HARD: White ceramic ball density is 7.80 g/cm3 -- making them virtually indestructible. The ceramic material is rust proof too. We don't call them Oldboys for nothing. These gems will last longer than metal bearings by far.

No bearings last forever, but Oldboys will outlive cheaper brands to prolong your skating enjoyment.

MAXIMUM DYANMIC LOAD

MECHANICAL RATINGS: Oldboy Ceramics are engineered to handle the heaviest skater.

With a basic load rating of Cor(KN) 1.62 and a dynamic load rating of Cr(KN) 3.96, these bearings take 364 pound-feet of force without breaking.

How many 360 pound skaters do you know?

Oldboy's are tough and durable.

HERE TO HELP:

If you find that Oldboy Ceramic Bearings are not perfect for your boarding needs just let us know. Our team is always here to help.

PASSION FOR BOARDING

Match your passion for boarding with a set of premium bearings and skate like a pro.

FASTER: Ceramic properties permit your wheels to tolerate extended use.

These 608RS ZrO2 ceramics will take abuse and last much longer than metal bearings.

SMOOTHER: Ride Oldboys for a few days to break them in and disperse the lubricant. Then experience a new level of smooth.

Oldboy Ceramics are not like non-lubed metal bearings or spinner toys that spin a long time out of the box. Lubrication slows down spin time at first.

Pro skaters know that fully lubed bearings last longer and ride smoother. That is why professionals avoid metal bearings in favor of high performance wheel bearings.

OLDBOY STICKS WITH YOU

Every box comes with TWO totally sick logo stickers. Put it on your board or helmet to show that you are a proud Oldboy.

DOING SOME GOOD. A portion of your purchase is donated to the National Outdoor Leadership School -- a Wyoming based organization that takes disadvantaged youth on wilderness backpacking trips. You show that skateboarders care about others less fortunate every time you make an order.

BORN IN THE USA: Founded by skater and his friends from Kirkland, WA, Oldboy is an American owned company.

JOIN OUR MISSION: Prolong the awesomeness of skating for as long as possible.

Slap in a set of Oldboy bearings and skate while you can!

• 🟥 RACE LUBRICANT - The superior grade steel balls have a light oil applied in the RACE for an ultra smooth and fast ride. Please note these high precision bearings require a short 'break in' period before optimal performance can be achieved
• 🔥 DUAL LABYRINTH SHIELDS - Unlike any bearing at this price point, Dragons come standard with two Labyrinth shields for unparalleled protection from the elements and maximum lubrication retention
• 🔥 PREMIUM BUILD QUALITY - Each bearing uses the highest grade steel and comes complete with a Nylon ball cage (for reduced friction for a fluid roll) and Labyrinth seals (for improved longevity and lubrication retention). Install and forget - Dragons are designed to last
• 🔥 PRECISION FITMENT - Manufactured to our exact specifications, these 608 bearings measure 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle) and is designed for use in skateboards, longboards, inline skates, roller skates, rollerblades, electric skateboards and more
• 🔥 LIFETIME BEAST GUARANTEE - At Fireball we stand behind our products and are proud to offer a Lifetime Warranty on our bearings, giving you protection against any manufacturing defects for the life of your bearing

User questions & answers

Question:	They are normal 8mmx22mmx7mm correct
Answer:	Yes. Stain the wood before you use it to prevent weather damage. We attached ours to a tree. Works great!
Question:	what Abec are these
Answer:	Correct. Used 3/8 lag bolts and it is great
Question:	Will these fit my a5 lux razor scooter
Answer:	Yes, it comes with two pegs
Question:	Are these bearings good
Answer:	The spacer looks just like our other boards with 3/4" spacer (not the 18" brackets though). Most of our other listings have pictures of the back. Mount with 3/8" lag screws at least 5 1/2" length. We don't put pictures of the recommended hardware because buyers will assume that the item comes with hardware.

Product description

A cousin to the Bones Swiss, the Bones Reds feature a removable high-speed nylon ball retainer, Bones Speed Cream lubricant, and ground super finished chromium steel balls. A premium bearing that allows for a sublime skate. Comes with a skateboard tool from the same CCS you've been trusting since 1985.

• Bones Reds are manufactured to Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry.
• Single, non-contact, removable rubber shield for easy cleaning and less friction. High speed Nylon ball retainer for greater strength and speed. Pre-lubricated with Speed Cream racing lubricant. Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible.
• Includes a set of 8 Bones Reds Bearings, 8 Speed Washers, and 4 Bearing Spacers.
• Instructions and Sticker are included in the box of Bones Reds Bearings.
• Bones Reds Bearings fit all skateboard wheels. This package includes enough bearings to outfit 1 set of 4 skateboard wheels.

User questions & answers

Question:	Do you Prefer the normal bearing or the Ceramic ones
Answer:	Yes. You can get a fast and smooth riding.
Question:	how come when I have both of my bearings in, it is slower than with just one bearing in? improper alignment
Answer:	They are wheels manufacturing company from China, with over 15 years of experience in the design of sports goods like scooters, skateboard and so on.
Question:	are these supposed to be extremely slow and barely move straight out of the box
Answer:	Si - son para skateboards.
Question:	Are these better or worse than abec 9s
Answer:	Hello, dear. The 58mm-60mm wheels are best for Penny board, it fits the beginners, smooth and speed. Best wishes!