12 best 4 inch submersible pumps

Product description

Hallmark Industries is the leading brand of water pumps for household and industrial applications. Based in Chicago, IL, all customer services and warranty will be handled in the U.S.1HP, 110(115)V/60HZ/1PH, 8 stages, 3.8" max OD, 33 GPM Max, 207 feet head, all S.S. , 1-1/4 NPT discharge. Warning: This is 110V pump! Using 220V will burn the pump!Specifications: 3.8" deep well submersible pump. 1 HP, 115V, 10.3 Amps, 8 stages, 1-1/4 NPT discharge Industrial grade heavy duty, also good for home usage This pump has max OD of 3.8", which fits a 4" or larger well casing; Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps. Water temperature: (32 113of) Trans medium’s Ph.: 6.5 8.5; All stainless steel construction, including shell, motor shaft, discharge and intake, etc to ensure corrosion resistance; High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start; Built in control box. This pump DOES NOT require an external control box! This pump uses high quality motor and high quality sealed ball bearings guarantee its excellent performance; This is a 2 wire pump (2 wires + ground wire) with 10' long electric cord included; Heavy-duty thermoplastic impellers, diffusers, and intake screen; Submersible design creates quiet operation, with its unique design reduces its noise; 207 feet max head is for open water tanks. Refer to the 'Pump Selection Guide' (posted here) for the pressure tank applications; Include splice kit, and water proof tape kit for wiring; Free phone support for installation and trouble shooting; Warranty: 12 months limited manufacturer's warranty

• American company
• Pump, Deep Well Submersible Pump, 1HP, 110V 60HZ, 33 Gpm, Stainless Steel, for 4" or bigger well, long life
• 2 wire pump with built in control box- DOES NOT require external control box; Industrial grade heavy duty, good for home usage; Built in thermal protection
• 207' Head, Stainless

User questions & answers

Question:	How will the wrong depth head pump affect the pump and the water system? Is it real crucial
Answer:	I use it in my septic system which is about 10 ft deep and it works real good
Question:	will this pump run on 220 amp
Answer:	no, it is 110 , most deep well pumps are 220 but this one pumps 33 gpm on 110. Don't worry about amps.
Question:	Can a pump with the wrong depth head still be used in the well
Answer:	Long as it's within the specified range
Question:	Hi, where do yo tie the safety rope that is connected to the submersible pump to at the top of 5" casing? Please help you know. Thanks
Answer:	You need to go to a pluming supply place and get a 1 1/4 npt to 1 inch brass adapter. This has eyelets to attach the rope.

Product features

Hallmark Industries MA0414X-7 Deep Well Submersible Pump, 1 hp, 110V, 60 Hz, 33

This is 110V (115V) pump. Does not work for 220V.

Product description

Hallmark Industries MA0419X-12AEXT pump, 4 inch deep well submersible, 2 HP, 230VAC/60Hz/1pH, 35 GPM max, stainless steel, with control box

Features & Technical Specifications:

* 4" deep well submersible pump. Fits 5" or bigger well casing (will not fit 4" well casing).

* 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge.

* Industrial grade heavy duty, also good for home usage.

* Patented impeller & 12 stage unique design provide a much longer pump life than other brands.

* 35 GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.

* 400 ft is total water head.

* Water temperature: (32 ~113oF) Trans medium’s Ph: 6.5~ 8.5

* Shell, motor shaft are made with stainless steel to ensure corrosion resistance. High quality sealed ball bearings guarantee its excellent performance.

* Hermetically sealed motor has thermal protection to prevent overheating, for longer life and powerful start.

* This pump comes with a starter box (control box).

* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, and uses less energy

* This is a 3 wire pump with ground wire (total 4 wire)

* 10' long electric cord, installation tape & electric tape kits are all included in the package.

* Heavy-duty thermoplastic impellers, diffusers, and intake screen.

* Unique design reduces its noise.

* User's manual included. Free technical support available during your installation.

* This pump has a built in check valve. However installing additional check valves is required.

* Shipped with pump head and motor separately. Assembly required.

User questions & answers

Question:	What is the gpm and psi ratings on this pump set at 300' deep
Answer:	If the water level is 300', the max psi the pump can produce is 43 psi. Please note it is based on the water level, not where the pump is. At max psi the flow is 0 gpm. At 300' water level with no pressure, the flow is about 15 gpm. Thank you.
Question:	Do you have a 3/4hp, 220 volt 4" deep well pump
Answer:	Yes. The part # is MA0459X-14A by Hallmark Industries Inc. Thank you.
Question:	Can you upgrade control box? If so, what type/size did you upgrade to
Answer:	The control box contains a starting capacitor which is designed to match the pump. So you can not change the control box. Thank you.
Question:	Do you have 3" 110 volt with 1" outlet box built in
Answer:	Yes. This is the link: https://www.amazon.com/Hallmark-Industries-MA0459X-14-S-Shell-Stainless/dp/B07BPFJ9BQ

• ★【Technical Specifications】4"，1HP, 230V, 5.1Amps , 60Hz,1-1/4” NPT discharge. 8 Impellers；Fits in a 4" casing.
• ★【Economy & Effective】33GPM max & 207ft head；33ft lengthy electric cord -allows for easy connection; built-in controlbox;built-in check vavle;built-in thermal protection
• ★【Outstanding Performance】Stainless steel body& permanent magnet motors&thermoplastic impellers -industrial grade heavy duty - guarantees high durability and long-lasting use;
• ★【Widely Application】 Perfectly convenient for use at home and for factory usage;can be implemented in different types of wells-ash pipe wells, steel pipe wells, or soil wells；Can be used for extracting water from reservoirs, canals, rivers, open water tanks and other water lifting works
• ★【 Built-in Controlbox】This item is with a built-in control box, it is for thermal protection, short-cut protection and overload protection

Product features

iMeshbean Submersible Deep Well Pump

• Outlet Diameter :1-1/4" NPT Discharge
• Diameter: 4"
• Protection Grade: IP58
• Pump Body Material: Stainless Steel - High strength and corrosion resistance
• Water Temperature: (32 ~113 ℉ )
• Water Ph: 6.5~ 8.5
• Maximum Sand Content: 0.25%

Coupling & Outlet

• Cast iron with electrophoretic paint.
• Easy to install and connect with the water pipe.

Stainless Steel Strainer

• Fixed with a filter screen to prevent solid grain of a given size from entrance of the pump

Power Cord

• 33 FT Power Cord
• 2 wire pump with 3-Wire (2 wires + ground wire)

Strong Motor:

• Copper Wire Coil
• High Efficiency
• Strong Power

High Precision Rotor:

• High Efficiency
• Stable
• Energy-saving
• Long-life

High-quality Bearing:

• Strong wear resistance.
• High-hardness
• Rustless

Applications:

• Water supply from wells or reservoirs
• Household use, for civil and industrial applications
• Garden and courtyard irrigation
• Swimming pool filling
• Fountains

• [ STRENGTH ] - DC 24V, 5A Max, Flow rate: 12LPM/3.2GPM, maximum lift: 230ft (70m), maximum submersion: 100ft (30m), cable length: 10ft (3m)
• [ EIFFICIENCY ] - This well water pump is made for DC power source like solar panel and battery. Start-up fast, efficient and strong stability.
• [ WIDE USE ] - An ideal solution for remote watering needs without electric power , like garden , farm irrigation and tank filling etc .
• [ EASY HOOKUP ] - Collocate with solar panels and 24V battery systems , can be powered by some car and boat battery .
• [ WARRANTY & NOTE ] - 1 year warranty. Please note: Thermally protected. Do not pump flammable liquds.

User questions & answers

Question:	Does this have auto shut off? If all valves are closed, will it stop pumping
Answer:	Of course, when you use it every time you connect. If you stay connected every day and the water inlet stays in the water source, not.
Question:	Can I run this pump strictly with solar panels? Will the pump be damaged as the voltage drops during the evening
Answer:	Yes, it is made of stainless steel. The better point is low noise.
Question:	can this pump work on 36v? my solar panels are 18v hooked in series
Answer:	Sometimes I put it in the rain, I’m too lazy to take it away, but it still works.
Question:	Can the pump operate dirrectly with solar panel thru controller without using battery? I mean i only need it during daytime
Answer:	Approx 3/4" depends on what size you go with

Product features

24V Stainless Steel Submersible Deep Well Pump

• Voltage: 24V DC
• Amps: 5.0 Max
• Flow Rate: 12LPM/3.2GPM
• Maximum Lift:: 230 Feet (70 Meters)
• Maximum Submersion: 100 Feet (30 Meters)
• Material: 304 Stainless Steel
• Inlet: 50 Mesh Stainless Steel Inlet Screen

Ideal Choice for The Supply of Fresh Water to Rural Homes, Farms, Cabins, Etc.

Product description

Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550)For submerged use in parts washers using aqueous solutions or UL-listed solvents. Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Features: Completely submersible Rated for continuous duty 1/4" MNPT discharge Thermal overload protection 1/2" MNPT Master Builders conduit fitting 6´ power cord without plug Nylon pump head Double lip Viton shaft seal Stainless steel motor shaftLittle Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Specifications: Horsepower: 1/40 Flow: 300GPH @ 1' Cord Length: 6' Shut Off: 12. 2' Voltage: 115 Hertz: 60 Amps: . 8 Watts: 47 Weight: 4. 5 lbs. Height: 5. 55" Width: 2. 9" Length: 5. 4"

From the Manufacturer

Little Giant pump for submerged use in parts washers using aqueous solutions or UL-listed solvents. Includes 6-Feet cord.

• 1/40 horsepower
• 300 GPH @ 1 Feet rise to 12. 2 Feet max
• 115 VAC, 60 Hz single phase
• 1/4-Inch MNPT discharge and 1/2-Inch MNPT Master Builders conduit fitting
• Completely submersible

User questions & answers

Question:	what options are there for mounting this unit? bolt/screw holes in the bottom or back? zip tip to something? included mounting bracket? thanks
Answer:	It’s not really strong smelling, but it’s flammable.It should only be used in a parts washer designed for a a flammable solvent.
Question:	how cold of solutions can the pump operate at
Answer:	It shouldn’t be used in a cheep parts washer that requires a water based solvent as it is very flammable.
Question:	Can this be used in a parts washer using diesel for the cleaner
Answer:	we are using st right no dilution and it took 15 gallons to fill our tank
Question:	I purchaed parts washer from TSC and put Superior Products "Brake Parts Cleaner" the pump practically melted. Does anyone if this pump will hold up
Answer:	HI, This is a liquid. Thanks

Product description

This complete submersible well pump set includes a 16 stage pump-end, a 2HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with motor overload protectors.



Flow at typical depth: 13.2GPM at 206ft., 11GPM at 328ft., 8.8GPM at 440ft., 6.6GPM at 525ft., 4.4GPM at 587ft.



Connector terminal inside the control box accepts up to AWG #8 solid wire or #6 stranded wire.



This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire.



Net weight 40Lb.(18Kg); Net length: 40” (1020mm).



1 year warranty.



external check valve(not included) is required in a water tight system but is not required for free flow applications.

User questions & answers

Question:	Your ad says expert instslation. Who does the installation
Answer:	No it will not stop
Question:	What would this product produce, GPM at 160 feet
Answer:	I have been running my pump just off the solar panels for almost a year now. The decrease in sun will lower the voltage output, decreasing the amount of water the pump will push. However, it hasn’t appeared to have damaged mine from it.
Question:	Where was this made
Answer:	It is a 24v pump, but, DC voltage has a higher rating than the voltage designation (i.e 12v = have a minimum input/output of 14.4v, 24v = minimum of 28.8). The newer panels have higher ratings, so you must have 2 - 12v panels hooked in series to get 36 volts. Should work, since in my experience that higher voltage will probably get you a higher water volume flow. I get about 30 volts and 6 amps out of 4 panels (2 banks in parallel hooked together in series, they are old 40watt panels) and I am getting about 5gpm from the pump which is only rated for 3gpm. As long as you meet the required amperage of 5 amps, the voltage will increase power. Which means higher voltage equals more water volume pumped. Make sure you have a pump controller (critical for extending pump life) and make sure your pump can't run dry (determine your well's static water level). The pump is advertised for 230' depth, but came with a disclaimer to not install it any deeper than 100'. I have one installed at 100' and 1 at 70', they have both worked flawlessly for over a year now. Feel free to contact me if you have any more questions. Our house has been off grid for 37 years now, we have 3 solar wells for stock watering and I have rigged a dedicated solar on a home freezer system, as well as our RVs.
Question:	what is the max O.D. of the pump unit
Answer:	yes, that's currently how I have it operating.

Product description

If you had a hard time pulling your old 4 inch pump out of the well because the 4" steel well casing is rusted or the PVC casing is melted, consider to use a 3" pump instead. This pump is also an ideal replacement for your jet pump. Go green, tired of priming your jet pump? get rid of your jet pump and use this higher efficient submersible! This complete submersible well pump set includes a 18 stage pump-end, a 1HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with a motor overload protector.



Flow at typical depth: 14GPM at 115ft., 12GPM at 160ft., 9GPM at 210ft., 5.3GPM at 253ft.



Connector terminal inside the control box accepts up to AWG #6 wire.



This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire.



Net weight 28Lb.(13Kg); Net length: 42” (1050mm).



1 year warranty.



external check valve(not included) is required in a water tight system but is not required for free flow applications.

User questions & answers

Question:	Is this a commercial grade pump
Answer:	Hi, for shipping purposes we had to start separating the motor from the body pump because of them dropping the pumps and damaging them. But attaching the pump to the motor would be the easiest part of installing a deep well pump and very simple to do. In the box comes; the motor, the pump, control box, and a splice kit. all packaged as best we can and protected from falls.
Question:	Here is it manufacture
Answer:	You can attach airplane wire with electrical tape...The 3 or 4 wire electrical wire that runs to the motor is sufficient to hold if the pvc pipe breaks when lowering or pulling up the pump. I used electrical tape every 16" or so with a complete wrap at the pump 2ft going up..
Question:	Hello,, with it being 3 inches diameter, wouldn't a 4 inch ID casing be cutting it pretty tight? there would be only 1/2 around the pump
Answer:	Hi, no, the control box contains the starting capacitor which at some point it might need to be replaced (it's like a car battery), pumps with no control box have the capacitor built inside which makes it very difficult to replace, kind regards - Oscar PREMIUMPUMPSUSA
Question:	What is the smallest I. D. PVC well casing pipe that can be used with a 3" pump
Answer:	Hi, it does have a wire guard, but this model is designed to fit in a 3 inch well casing. As long as its 3 inch well casing and not a different kind of pipe it should fit. No customers have told us that it didn't fit in their 3 inch well casing

Product description

This complete submersible well pump set includes a 10 stage pump-end, a 2HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with motor overload protectors.



Rated Flow 23GPM.



Flow at typical depths: 26GPM at 180ft., 22GPM at 233ft., 17.6GPM at 259ft. 13.2GPM at 275ft.



Connector terminal inside the control box accepts up to AWG #6 wire.



This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire.



Net weight 40Lb.(18Kg); Net length: 38.5” (970mm).



1 year warranty.



external check valve(not included) is required in a water tight system but is not required for free flow applications.

User questions & answers

Question:	can it work well in a very deep well ? say about 80meter below pls
Answer:	For 160 feet head, you should choose a different pump. If you want low flow around 9GPM, use a 1HP pump, Amazon listing number is B00J1WTL1M . If you want higher flow, and you want a 2HP pump. You can choose one of the two pumps that pumps higher flow. For 160 feet free flow(open flow). Use Amazon# B006OSS0CW model TH4-023-10 , If you require 50PSI pressure , use Amazon# B006PJ3L4M , model TH4-015-12 . Note that 50PSI is equivalent to 116 feet head, so the Total Dynamic Head is 160+116= 276 feet. Look up the pump curve at 276 feet to get the flow rate information from the model that you choose.
Question:	Where is this pump manufactured and made
Answer:	Somewhere in Canada I think.
Question:	Have a control box MA-2 and i lost manual on the wiring how do i know this color is common start or run
Answer:	1 1/4 "

Product description

**To be used for up to 160 feet with free flow or up to 100 feet in a system with a pressure tank** This complete submersible well pump set includes a 7 stage pump-end, a 3HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with motor overload protectors. Flow at typical depth: 48GPM at 128ft., 37GPM at 157ft., 32GPM at 170ft. 26GPM at 180ft. Connector terminal inside the control box accepts up to AWG #8 solid wire or #6 stranded wire. This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire. Net weight 42Lb.(20Kg); 1 year warranty from the date the items are received. All warranty claims must have an assigned RMA number. Please contact us ahead of time to obtain an RMA number. Unopened items may be returned for a refund of full payment less shipping costs by contacting us for an RMA number within 14 days and postmarked within 30 days of receiving the items.

User questions & answers

Question:	What kind of pressure does this pump produce
Answer:	call a electoral professional
Question:	how long is the wire on the pump
Answer:	A well person would be installer. I had my installed by a well guy.

Product description

This complete submersible well pump set includes a 9 stage pump-end, a 1HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with motor overload protectors.



Flow at typical depth: 13.2GPM at 105ft., 11GPM at 164ft., 8.8GPM at 219ft., 6.6GPM at 262ft., 4.4GPM at 291ft. Please read the pump curve



Connector terminal inside the control box accepts up to AWG #8 solid wire or #6 stranded wire.



This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire.



Net weight 30Lb.(14Kg); Net length: 30.25” (760mm).



1 year warranty.



external check valve(not included) is required in a water tight system but is not required for free flow applications.

User questions & answers

Question:

Will this pump 6 gpm at 360 feet

Answer:

China, of course. The same pump is made in Arkansas and would have been $2200 from our local pump guy. The AR pump needs replacing or reworking about every 7 years under our system of water delivery. The property is for sale and I did not want to spend more. I usually do not buy China items but if the AR pump does not last why spent the $? I did not know country of origin when the purchase was made.

Product description

The Utility Transfer Pump from SumpMarine is a 1/10th HP multi purpose transfer pump capable of transferring up to 330 Gallons per hour. This lightweight, portable utility pump is perfect for household applications and/or emergency use. Compact and easy to store, a SumpMarine Utility Transfer Pump is the perfect solution for household and light commercial use. Specifications: - Light weight, Portable Pump with metal hose connectors to a standard garden hose - Powerful 1/10th HP Motor - Capable of transferring up to 330 Gallons per Hour - Self Priming and removes water down to 1/8-inch of surface when water suction attachment is connected Included in this Package: - 1/10th HP Pump operating with standard 115V power from a wall socket - 6 foot garden hose with water suction attachment - Complete impeller replacement kit Applications: - Ideal for everyday household water transfer requirements - Perfect for water distribution such as watering lawns or gardens - Great for draining waterbeds, clogged sinks, and aquariums. This item is flammable if not used as instructed. This item may internally explode if not used as instructed.

• Heavy Duty 1/10th HP Pump operating at 115V from a wall socket with up to 330GPH pumping capacity
• Made of durable material with Metal hose connectors for higher reliability than plastic threads
• Light weight and portable. Fill pump with water, connect hoses, plug in and you're ready to go
• Perfect for household and utility applications of transferring water from one place to another
• Includes 6' hose and Water Suction attachment as well as an impeller replacement kit

User questions & answers

Question:	how much pressure does this have. I have a on demand water heater that need 20# of pressure, will this work
Answer:	This won't work. This pump probably has only 10 psi at best. I used this with a water hose to transfer a 60 gallon pond of water, it took 45 minutes to do so. Buy a bigger pump. It's nice if you only have a low demand like I did. Plus this pumps shuts off automatically every 7-10 minutes of use.
Question:	How long is the power cord
Answer:	About 4 feet.
Question:	Where can you get repair parts
Answer:	This did come with impeller replacement kit in the box. Anything other than that, I am not sure. We haven't had ours long enough to need parts.
Question:	Can I leave this pump outside during warmer weather
Answer:	I would think so but only if its protected it from the weather. The motor body has vents at the end where a cooling fan spins and if water gets in there...I dont know. Also, if it gets too hot it will shut down until it cools. Its not a sump pump, and its great for emptying say a 50 gal reservoir in 10-15 minutes but its not heavy duty.

Product description

Quietly and quickly drain your pool or pond in a matter of hours with the EZ Travel Submersible Drain Pump. This pump is perfect for emptying water tanks, ponds, pools, hot tubs, low lying flooded areas, and more. The impact-resistant plastic body is rust-resistant and built to last. This drain kit includes an exploded parts diagram and instructions. Unlike other drain pumps on the market; this model is rated at horse power and can drain a hot tub in minutes. The pump requires little work to operate and is completely submersible. An overheat prevention mechanism automatically shuts the pump off when the water line becomes too low. Sit back and let this EZ Travel Submersible Drain Pump do the work to drain your pool or pond in just a few hours!

• UP TO 2,000 GPH - This new automatic submersible drain pump from EZ Travel Collection is capable of pumping up to 2,000 gallons of dirty water an hour. Complete with a drain hose, hose clamp, and automatic float switch shutoff feature, this pump takes the hard work out of pool maintenance.
• 400 WATT MOTOR - Rated at horsepower, this transfer pump drains a hot tub in minutes. The pump requires little work to operate and is completely submersible. The removable and adjustable spigot makes pump maintenance simple.
• COMPLETELY SUBMERSIBLE - Easy to operate, this automatic sump pump is completely submersible. The overheat prevention mechanism automatically shuts it off when the water line becomes too low to feed the pump.
• PORTABLE AND RELIABLE - This EZ Travel Collection submersible drain pump combines portability, reliability, and power. With strong impact-resistant casting, our new streamlined design includes a durable and convenient carry handle.
• DIMENSIONS - Pump: 12.5" x 6" x 6" (L x W x H). Drain Hose Length: 25' Drain Hose Diameter: 1-1/2"

User questions & answers

Question:	Safe to use with Salt water pool
Answer:	Yes, safe for use with salt water pools. Thank you!
Question:	i want to pump water out of may crawl space will it work
Answer:	This pump is designed to be submerged into deep water. It works great for draining hot tubs, pools, ponds, but just as long as the water is at least 1-2 feet to start. The pump will leave about 2-3 inches of water at the bottom of said hot tub or pond. So as long as your crawl space has deep water (like 1-2 feet) then yes, otherwise if the water level is low to begin with; I would try a pump like this: https://www.amazon.com/dp/B07PH2Z2Y3?ref=myi_title_dp
Question:	Have a stream in back of home. Looking for emergency pump to send excess water down driveway slope if we ever got excess rain. Would this work
Answer:	As long as the pump is under water; it will work just fine. This means you would have to place this pump in a place where your stream is at least 2 feet deep before plugging it in and running the hose over to your driveway.
Question:	Does it come with everything you need to start using it
Answer:	Yes, you just set it upright in the bottom of your spa and unroll the hose then plug it in and it starts pumping water out automatically. Nothing else needed to buy. Works great and drains my 350 gallon spa in about 20 minutes.