11 best scope for ar15 american tactical

• These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.
• Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
• Made from aircraft-grade 6061-T6 aluminum for optimum strength.
• Sold two rings per package.
• Base Clamp Screws:25-30 in/lbs

User questions & answers

Question:	Will these work on the AR15 rifle, if so what height is recommended
Answer:	Yes, these mounting rings work perfectly on an AR15. I have them mounted on my AR15 and they are 1.5" high from the mounting grooves to the center of the scope rings. However, they are not compatible with the standard AR15 iron sights or the standard 'Carry Handle' upper receiver of a stock AR15. In order to use these rings, the AR15 must have a 'Flat Top' upper receiver. However, you don't have to give up iron sights in order to mount a scope. There are various 'Back-Up' iron sights (BUIS) available that can be mounted on the side of the upper rail and used in case the scope gets damaged or out of alignment. There are photos on the internet that will illustrate the above setup. Hope this helps!
Question:	will these fit 20mm picatinny rail
Answer:	Yes. Should fit fine.
Question:	Will these rings work in picattini bases? What brand you recommend
Answer:	These rings will work w/any Weaver style bases to include picitiny Bases. Jon
Question:	Will these sit high enough for a crossfire II 50mm scope
Answer:	These Vortex Hunter Rings (Medium) position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.http://www.vortexoptics.com/product/vortex-hunting-1-inch-rings-mediumThe front "bell" of most of the 50mm Crossfire II scopes that use 1" rings is either 2.44" wide (4-12x50) or 2.24" wide (3-9x50) so whichever one you are talking about, cut that number in half (1.22 or 1.12). Then if you put a straight edge on your scope bases, measure up 0.87 inches (center height of the MEDIUM rings). If that is at least 1.22 or 1.12 off the barrel (depending on which 50mm Crossfire II you are looking at) the MEDIUM rings will work. If not you will need the HIGH rings (position the center of the riflescope tube at a height of 1.22 inches (31.0 mm) from the base) will be needed.

Product description

Nikon new p-tactical riflescopes provide the features you need to maximize your shooting experience-regardless of the platform you mount it on. Fully multicoated optical systems housed in rugged, one-inch, aircraft-grade aluminum main tubes brighten even the most dismal environments and unforgiving conditions.

• The BDC carbine reticle provides a 200 yard Crosshair with "hash marks" at 400 yards and 600 yards
• One inch body tube
• Spring loaded instant zero resets turrets
• Elevated windage and elevation turrets
• Generous consistant Eye relief
• Included Components: Scope Caps

User questions & answers

Question:	New guys asking is this a fixed focus scope
Answer:	Fixed eye piece adjust only to focus no power adjustment great scope super compact
Question:	What is the distance for maximum tube length for a one piece ring mount. I have an American defense qd
Answer:	The 1" tube has about ~29mm (+/-0.5mm) on either side of the adjustment turret block (which is 33mm long). DL the manual, it has dim's. Great scope
Question:	I have an A2 front sight on my AR carbine 16" barrel will i need high mounts
Answer:	You can use high mounts but to make it sleek you will have to replace your gas block, or just cut off the sight.
Question:	If this is a good fit for an ar 15, what size of mount do i need? pls anybody
Answer:	any 1" rings will work. Or the one piece like the Nikon M-223 XR Mount

Product features

NIKON P-TACTICAL SCOPES

Nikon’s P-TACTICAL scopes provide the features you need to maximize your hunting experience — regardless of the platform you mount it on. Fully multicoated optical systems housed in rugged, one-inch, aircraft-grade aluminum main tubes brighten even the most dismal environments and unforgiving conditions. The versatile 3x zoom ratio (on variable models) provides the field of view at the low end and the detail at the high end to satisfy most shooting demands. P-TACTICAL’s hash-marked MK1-MOA or MK1-MRAD reticles are matched to ergonomic turrets with directional indicators to make every come-up-or down — both simple and intuitive. Dedicated caliber models — including rimfire — match the reticle to your preferred caliber. When used in conjunction with Nikon’s free Spot On Ballistic Technology, all reticles offer exact holdover points or elevation adjustment for any long-range engagement.

Bright, Fully Multicoated Optics

Fuly multicoated optical systemshoused in rugged, one-inch, aircraft-grade aluminum main tube brighten even the most dismal environments.

Spring-loaded Instant Zero-reset Turrets

Windage and elevation turrets are clearly marked for quick adjustments. Rugged, aircraft-grade aluminum main tube.

Quick Focus Eyepiece

Smooth-turn aluminum ring with rubberized eye guard allows crisp reticle focus and quick target acquisition. Spring-loaded windage and elevation knobs can be reset to “zero” after sighting-in for easy reference when making field adjustments.

Waterproof/Fogproof/Shockproof

O-ring sealed to prevent moisture from entering body and nitrogen purged for total reliability against thermal shock. Shockproof construction shrugs off hard recoil and rugged use.

BDC 600

The P-TACTICAL line offers models with the newly designed MK1-MOA and MK1-MRAD reticles, as well as the platform-based, caliber-designated BDC 150, BDC 600, BDC 800, BDC SuperSub and BDC Carbine.

MK1-MOA

The MK1 reticle’s asymmetrical design allows for additional holdover and can be used to estimate range, target size, elevation holdover and wind-drift at the designated magnification.

BDC Carbine

The BDC reticles can be optimized with Spot On Ballistic Technology at NikonSportOptics.com/SpotOn

• [ULTRA DURABLE] - Constructed With Heavy Duty Industrial 600D PVC Nylon
• [ULTRA SPACIOUS] - Holds 2 Rifles & 2 Pistols w/ Additional Pocket Compartments
• [ULTRA SAFE] - Lockable Zipper Sliders On Both Firearm Compartments
• [ULTRA DELUXE] - Molle Grid, Paracord Zipper, D-Ring and Backpack Straps
• [SAVIOR WARRANTY] - Unquestioned Lifetime Warranty. Love It Or Return It.

User questions & answers

Question:	My rifle measures 34 inches. Will the 36" bag be large enough
Answer:	Yes, but two 34" guns will be tough. I tried putting a kel-tec RFB and KSG (both 26") into the 28" bag. It worked... But it was tight, and then it limits access to the pistol pockets and other internal accessory pockets. I upgraded to a 32" bag.
Question:	Will .308 mags fit in the pouches
Answer:	Yes
Question:	How many people have one of these and really love it? Is it the best, or what’s the best/most protective
Answer:	I really love mine and it protects fairly well, it does what it is suppose to do... I believe this is a best bang for your buck bag... Also after a while you just start paying for the name... but with that being said the more money you spend the more protective features you get in different bags... look at your budget and make a decision.
Question:	I don’t see an option for the 55” long one
Answer:	I don't think they have 55" in OD green.

• 🔫 HEAVY DUTY: This tactical range duffel bag is composed of heavy duty water resistant polyester that's durable enough for daily use. Inner PVC lining provides protection from water spillage on the inside or outside.
• 🔫 LARGE OPENING: Main compartment is a wide U-shaped opening for maximum opening space without compromise to functionality. Side pockets also have large openings relative to their size.
• 🔫 SAFETY: Main compartment features lockable YKK zippers to keep unwanted people out of your belongings and firearms.
• 🔫 COMFORT: Features an adjustable padded should strap and wrap-around Velcro strap handles.
• 🔫 Large Tactical Duffel Bag DIMENSIONS: 30"L x 14"W x 12"D

User questions & answers

Question:	How tall is this bag, outside
Answer:	Although it is not marketed for the V4, the 50mm flip up will fit on 50mm V4 models.
Question:	Where is it made
Answer:	The V8 50mm flip-up cover will not fit the Victory V8 2.8-20x56. You will need the V8 56mm flip-up cover for that model.
Question:	Are the molle strap wide enough to actually work? I just returned a bag with undersized molle strap that fit nothing
Answer:	I have mine mounted on a V6 3-18x50 the 50 is what counts, It should fit. Beware that you will have to take the scope off in order to mount the lens cover, due to clearance. Well worth the effort when protecting awesome glass. Recommend the glass cleaning kit too.

Product description

Ask any trophy hunter. They'll tell you more tags are filled in the low-light hours than any other time. Enter the Bushnell Banner 3-9x 40 Multi-X riflescope, a scope designed to excel in early-morning and late-evening light. Featuring Dusk & Dawn Brightness (DDB) multi-coated lenses for clarity and brightness in low light, you'll add precious minutes to every hunting day with the Banner Dusk & Dawn series. With one-piece tube design, the Banner Dusk & Dawn line includes a full assortment of specialty scopes for big-game, varmint, .22 rimfire, slug, black powder and turkey hunting.

• Quality optics with stunning HD clarity
• 100 percentage quality materials used and tested extensively
• Beautiful design and durability built to last
• Low light rifle scope with 3 to 9x magnification and 40 millimeter objective lens
• Dusk & Dawn Brightness (DDB) multicoated lenses for clarity and brightness
• Multi X reticle; 1/4 MOA fingertip windage and elevation adjustments
• 100 percent waterproof/fog proof construction; 3.3 inches of eye relief
• Fast focus eyepiece; Measures 12 inches long

User questions & answers

Question:	How do i contact seller
Answer:	Go to your orders through amazon and you should see the seller, otherwise just contact amazon directly to try and get resolve to your issue.
Question:	What reticle does this scope have? I do not like the fine crosshairs
Answer:	If you don't like fine cross hairs you will like this scope,but just so you know the thinner the crosshair the more accurate the shot
Question:	does it have a 1" or a 30mm tube, I need to know what size scope rings to buy for it
Answer:	1 inch you'll LOVE this scope!!!!!!!!!!
Question:	Which sun shade can i get for this scope? Thanks
Answer:	Bushnell does not have a stand-alone sun shade compatible with this particular scope.

Product description

The new VX-Freedom delivers the legendary Leupold performance and dependability hunters and shooters have demanded for decades, combined with a host of new and improved features. The VX-Freedom is guaranteed to get the job done every time.

• Model #176011 - VX-Freedom 450 Bushmaster 3-9x40 with Duplex reticle and Matte finish
• 100% Waterproof, fogproof, and shockproof.
• Includes ballastically matched bullet drop compensation elevation dial optimized for .450 Bushmaster
• Twilight Light Management System - Adds up to 10 extra minutes of shooting light and reduces glare for crisp image quality
• Precision 1/4 MOA finger click adjustments for windage and elevation offer absolute repeatability and dependability over a lifetime of extreme use

User questions & answers

Question:	Does this scope have rubber on the eyepiece to lessen scope burn
Answer:	The Leupold VX-Freedom line does not have rubber on the eyepiece, but it does have very generous eye relief (4.17" on low power and 3.66" on high power), so when mounted correctly being hit or "burned" with the scope due to recoil should not be an issue.
Question:	would it also be compatible with other loading's such as the barnes 275 grain ttsx, or am i better of getting a cds for that specific load
Answer:	Cds for that load
Question:	Will it fit a Remington
Answer:	You would want the standard 3-9x40’this one is made just for the 450 bushmaster Hornady round. You would have a hard time getting it to dial in if at all
Question:	I was told by a gun buyer that they discontinued the cds scope is this true
Answer:	Not sure

Product features

Leupold VX-Freedom

The new VX-Freedom delivers the legendary Leupold performance and dependability hunters and shooters have demanded for decades, combined with a host of new and improved features. The VX-Freedom is guaranteed to get the job done every time.

Twilight Light Management System

Leupold's Twilight Light Management systems delivers industry leading brightness and clarity by balancing light transmission, glare reduction, and image contrast and resolution ensuring a crisp image in any lighting condition.

Designed, Machined, & Assembled in the USA

We design, build, and test our products with a single-minded focus: to make sure they'll perform.

No matter where you take us, on the battlefield, competition, or on the hunt, we won't let you down.

So Be bold. Be tenacious. Be relentless.

Product description

The Flambeau Outdoors 6500AR AR Tactical Gun Case provides a convenient and secure way to store your gun. The case has an interior convoluted foam lining that keeps the weapon inside protected. The case is equipped with storage accessories inside to keep all of your gear organized. Includes 10" x 13" magazine storage dividers infused with anti-corrosion Zerust technology and Velcro straps for securing gun and magazines inside. Made with Zerust dividers. Zerust products are made with a proprietary chemical formulation that is invisible, odorless, non-toxic, non-reactive, non-flammable and non-allergenic. This chemical formulation releases a vapor that diffuses throughout an enclosure made with Zerust VCI materials and settles on exposed metal surfaces to form a microscopic corrosion inhibiting layer.

• RUGGED CONSTRUCTION: The hard plastic exterior of the case protects your firearms from hard impact and general wear-and tear. Convoluted foam inside provides additional support - the interior foam padding insulates the guns against shock due to falls.
• ZERUST ANTI-CORROSION TECHNOLOGY: Includes an anti-corrosion Zerust tab that releases a corrosion inhibiting vapor that forms a protective layer on metal to stop rust. Provides a minimum of 5 years of protection.
• SECURE CLOSURES: This Flambeau Outdoors gun case is designed with four locking points for safe secure closure of your weapon during storage and transport.
• SMART STORAGE DESIGN: Includes 10" x 13" magazine storage dividers infused with anti-corrosion Zerust technology and Velcro straps for securing gun and magazines inside.
• SPECIFICATIONS: Interior dimensions are 40" L x 12" W x 4" D. Meets TSA and airline safe requirements. Made in the U.S.A.

User questions & answers

Question:	Which one is the biggest size? I need to fit in that case my AR 15 with 3-in-1 scope/laser/red dot
Answer:	Absolutely. That is an advantage to keep the gun in place and tight, especially if you have accessories like a scope attached.
Question:	Is it okay to NOT cut out the foam and have both sides squish tight around the rifle while closed
Answer:	My AR with scope (which sits centered in the case and puts the scope close to the handle with just over an inch of clearance above and below) is 14 inches from bottom of handle to top of scope. The scope and mounts are 3 inches high. I have a 16 inch barrel so if I needed more room I could easily slide the gun to one end and avoid the handle on the case altogether.
Question:	Will AR-15 with red dot or holigraphic mounted fit
Answer:	We do not have the exact inside dimensions but the outside dimensions are 41.5" x 15" x 5" so it would be just slightly smaller.
Question:	What are the inside dimensions of the case
Answer:	Personally I think it would fit just fine. I have mine on a 10 inch build that I just did and it looks and fits nice.

Product features

Flambeau Long Gun Storage

You spend a lot of time dialing in your rifle; keep it safe, secure, and sighted in with Flambeau protective cases. Our cases are designed to keep your sights protected and your rifle in the same condition you put it into the case at.

Flambeau Hand Gun Storage

Keep your everyday carry secure and protected from range to home. Our cases are designed to keep firearms preserved to perform.

About Flambeau Outdoors

As a family owned company from its foundation in 1947, that very philosophy remains the backbone of our brand and serves as the origin story of our logo—shared memories of hunting and fishing by the Sauey family under sunrises over the Flambeau River. Over 72 years later, our company remains dedicated to providing quality hunting and shooting sports products that are more than just standalone tools of the trade—we provide a legacy as a heritage brand that stands behind its product as the sportsman’s and sportswoman’s constant partner in the outdoors.

Product description

The AD-RECON mount is made for putting high power glass onto a flattop style gun. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.

• Does not require proprietary tools for adjustment
• Can be adjusted with your finger or a flat blade screwdriver
• Lever can be configured to lock to the front or the rear
• Superior clamping surface to insure maximum rail engagement
• The AD-Recon works with scopes with Objective Housings as large as 2.2 inch

User questions & answers

Question:	Seller - I need this in 1 inch but with Prime 2day delivery?? Would inserts work in the 30mm if you don't have it in 1" Thnx
Answer:	13"
Question:	will this mount be high enough to clear a standard picatinny rail with a 50mm scope
Answer:	Made in Pakistan
Question:	Is this mount 0 MOA
Answer:	I usually use the handle to carry my range bag, but the strap looks pretty substantial and I wouldn't hesitate to use it if needed, Good luck.
Question:	why does the photo have three screws
Answer:	Unfortunately, ZEISS does not currently sell flip-up covers for the Conquest V4 4-16x44 riflescope.

Product features

American Defense Riflescope Optic Mount

The AD-RECON-OFFSET-NW mount features the Patented QD Auto Lock(tm) Titanium Lever system which has the following advantages :

• Does not require proprietary tools for adjustment.
• Can be adjusted with your finger or a flat blade screwdriver.
• Lever can be configured to lock to the front or the rear.
• Superior clamping surface to insure maximum rail engagement.

• With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
• Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
• Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs.
• Quickly attach to or detach from the rifle using existing swivel stud.
• Foldable arms with spring tension control. Come with the mount adapter.

User questions & answers

Question:	How do i attatch the rail mount to the bipod itselfl
Answer:	Yes... Remove the plastic tube from the bipod, untwist the thumb screw, thus will loosen the fingers. Place onto the piece that mounts to your to your rail system, finger tighten then attach the bracket to your rail at desired location and tighten with supplied allen wrench. The plastic protection tube can throw you off...
Question:	Would tho bipod fit on a springfield saint ar 15 5.56 rail
Answer:	This bipod comes with a weaver/pictatinny mount adapter so if your fire arm has either of those rail types, it will fit. It requires about 4 slots on a picatinny rail (just an estimate).
Question:	Can a sling be mounted to the attached bipod? I don't want to give up my sling to mount a bipod
Answer:	Yes, there is the ring on the bipod for you to attach sling.
Question:	Does it have the swivel or pivot feature
Answer:	It doesn't have a swivel or pivot feature, however I just got mine and mounted it and just checking it out at home I found that you actually can pivot up and down a reasonable amount, and I was actually able to pivot it a good amount as well. Didn't measure, but probably around 20-30 degrees worth, which would translate to many moa's and a good amount of distance at range. I had a bipod with swivel and pivot features and it never really locked in like I would have liked, so I actually like the way this one feels more. First impressions are really high. So far I can't tell the difference between this one and a much more expensive 'famous maker' one I had. Will be taking it out in the next day or two and can't wait.

Product description

Proper eye position ready for combat rifle scopes 2x QD Lever Optics Type: 30mm / 1 inch Auto Lock Lever System Weight just 8.4 ounces Color: Dark Earth, DE ( GBO - QD -DE ) Scope Rings Mount Top Rail 30mm - 1 inch Ring Tactical Recon for Burris, Nikon, Leupold, Vortex, UTG, (Black)

• See photo above for detailed specs. ( GBO - QD -DE ) Scope Rings Mount Top Rail 30mm - 1 inch Ring Tactical Recon for Burris, Nikon, Leupold, Vortex, UTG, (Black)
• Ships from Central Texas, Very High Quality QD Scope Mounting System
• Super Precision Engineered, Riser Mount for Rifles with Picatinny/Weaver Rail
• All heat treated steel and aluminum construction and Precise machining
• Designed fit for most 30mm / 1 inch scope brands and models

User questions & answers

Question:	will this work on a Henry 22 mag pump 3/8 dovetail? if not, does your company make one that will fit a Henry
Answer:	Depends on the scope mount.
Question:	Is it possible to tighten the locks at the base? It's loose enough to be able to slide forward and back on my rail
Answer:	That is a good question, I have no idea, the reticle is for 5.56 NATO, mine is mounted to a 16in barreled AR15 carbine, Its built well I think it will handle a larger caliber rifle's recoil impulse. I hope that helps.
Question:	Do you know if this will fit a Thompson Center Venture .270 that has a two-piece base
Answer:	Yes, the magnification is adjustable between 1x zoom and 4x zoom
Question:	Will this work with 30mm main tube scopes? Or just
Answer:	We have several customers who run it on Bushmaster .450 with no problem. This scope does carry a lifetime warranty, so if the recoil causes any issues we will fix or replace it for you at no cost to you.
Question:	What is the center height measurement (Top of Pic Rail to horizontal center-line of the scope
Answer:	i would not
Question:	How does this scope hold up when on larger caliber rifles
Answer:	Yes, I have a 40mm scope on my AR, and it has over 1/2 inch clearance between scope and rail.
Question:	Can you adjust magnification
Answer:	Not sure I am following the question - kindly trust the following will assist: "0 MOA" refers to accuracy of a scope as opposed to the scope-mount. AD-RECON mount is dependent upon the rail to which said scope is attached; and second, the scope itself. The scope, after the scope is mounted should be sighted in to preference (e.g., 100 yards, 200 years & so on). Every mount should follow the manufacturers instructions to mount to a fire arm. In short, all mounts are designed to align to the rail for accuracy, but are not characterized as "0 MOA." Scopes are characterized as "0 MOA."
Question:	Will this handle the .50 Beowulf recoil
Answer:	Hello,Amazon controls the photos on the listings. Our main website, eurooptic.com has accurate images.

Product description

The Ruger Defiance Tactical Rifle Case has extra-rugged Endura fabric construction with a soft knit lining. The case also features a magazine pocket and multiple accessory pockets, as well as a padded carry handle. Lockable.

• Fits tactical rifles up to 42"
• Rugged Endura fabric construction
• Embroidered Ruger logo
• Magazine and accessory pockets
• Thick foam padding and soft knit lining

User questions & answers

Question:	Is the side accessory pocket large enough for a Glock
Answer:	No, Super Precision Engineered, Riser Mount for Rifles with Picatinny/Weaver Rail
Question:	Will a Ruger American Rimfire with 22 inch barrel fit on this bag
Answer:	Once you tied the screws, the only way to take it off is by releases the side handles the only way is coming out is pulling up
Question:	I bought 2 of these in June of 2019 for less than $37.00, now it is almost $50.00? Why the huge increase in price
Answer:	Yes it will
Question:	Will a Ruger Precision Rifle fit in this case
Answer:	works with both, 1" with inserts, 30mm without inserts.