11 best replacements for dogtras
Replacements for Dogtra products, such as collars, harnesses, and leashes, can refer to various components and accessories designed to maintain or enhance the functionality of these pet supplies. Here are some common replacements and accessories for Dogtra products:
Replacement Collar Straps: Over time, the collar strap on electronic training collars or bark control collars may wear out or become damaged.Dog owners can purchase replacement straps to ensure the device stays securely on their pet.
Transmitter Batteries: Dogtra training collars often come with remote transmitters that require batteries for operation. Replacement batteries are readily available to keep the transmitter functioning correctly.
Receiver Collar Batteries: In electronic training collars, the receiver worn by the dog also requires batteries. Replacement receiver collar batteries are essential to ensure that the training collar continues to work as intended.
Contact Points: Electronic training collars typically have contact points that touch the dog's skin. Dog owners may need to replace these contact points if they become damaged or worn, ensuring proper electrical contact.
Charger and Charging Cables: Many Dogtra products are rechargeable, so replacement chargers and charging cables can be necessary if the original ones are lost or damaged.
Remote Transmitter Antennas: The antennas on remote transmitters can sometimes get bent or broken. Replacing the antenna can help maintain signal strength and communication with the dog's collar.
Strap Clips and Buckles: Collars and harnesses may have clips or buckles that could break or wear out. Replacement clips and buckles are available to keep these pet supplies functional and secure.
Replacement Leashes: While not specific to Dogtra, dog owners may seek replacement leashes if their current leash becomes frayed, damaged, or lost.
Replacement Remote Transmitters: In cases where the remote transmitter is lost or damaged beyond repair, dog owners may need to purchase a new transmitter to continue using the training collar effectively.
These replacement parts and accessories can help dog owners maintain the safety and effectiveness of their Dogtra collars, harnesses, and leashes while ensuring the well-being of their pets during training and outdoor activities.
Below you can find our editor's choice of the best replacements for dogtras on the marketProduct description
For Models:175NCP200 Series280 Series300 Series7000 Series1100NC1200 Series1500 Series1600 Series1700 Series1900 Series2300 Series7100 SeriesRR Deluxe
- Dogtra 2" Replacement Transmitter Antenna
User questions & answers
Question: | I am looking to replace my Dogtra Edge antenna. Will this work |
Answer: | I had the same issue. Mine lasted not even 2 years, replaced the battery in the collar and recall and still did not work right |
Product description
It features a 400-yard range, 2-hour rapid charge batteries and Dogtra's reputation as the world's finest e-collar. Now the unit can be expanded to train two dogs at once. This transmitter can be used to replace an existing or lost transmitter.
- Precise stimulation level (0-100). 400-yard range.
- Nick', 'Constant' and non-stimulating pager/vibration.
- Weight: 0.2lbs. Dimensions: 8.5"L x 6.75"W x 2.25"H
- LED battery life indicator.
- Fully waterproof collar/receiver and water-resistant transmitter.
User questions & answers
Question: | this remote have a 2 collar setting |
Answer: | This one works for an e collar |
Question: | Does this come with direction on how to program to existing collar |
Answer: | Yes, it's plenty long for a large breed dog. I got the replacement collar/strap for our model and it fit just fine. |
Question: | Can I buy a replacement collar-receiver |
Answer: | JOBST MAKES THAT TYPE ALONG WITH OTHERS. ORDER THE 15-20 COMPRESSION ALONG WITH YOUR SIZE ( LARGE. MEDIUM OR SMALL). |
Product description
DOGTRA 1" Contact Points & 1" Sparky Pet Co High Flex Replacement Strap
Replacement Contact Point for Dogtra models
Available 1" length. Sold as sets .
Fits all Dogtra models using female contact points, except YS200 and 150NCP.
E-collar, Bark Collar, or GPS Collar Replacement Strap
Perfect replacement strap for most e-collars, no-bark collars, or tracking collars using a 3/4-inch strap. Convenient D ring at the buckle.
Heavy polyurethane coated nylon is rugged and waterproof, while remaining flexible enough to fit your e-collar or GPS collar. And the strap keeps its flexibility - even in cold weather.
30 sizing holes are spaced tightly to allow for a perfect fit. Strap width is 3/4 inch and the length measures approximately 28” inches from one end of the nylon to the other (including buckle). The unique strap material may be cut to your desired length - no need to worry about the collar unraveling or being damaged.
Both ends and all holes are heat-sealed for a long-lasting, finished look. smooth, 3 flat rivets add strength and durability, but don't snag.
Strap is maintenance free, easy to clean (just wipe with a damp cloth), resists mildew, bacteria and rotting, and is odor resistant.
Proudly Made in the USA.
Features
- Convenient D ring at buckle
- Polyurethane coating
- Rugged and Waterproof
- High Flexibility
- Tightly spaced Holes allow perfect fit
- 3/4" inch wide
- Approx 28" long ( including buckle)
- Heat-sealed ends and holes
- 3 smooth, flat rivets
- Nickel-plated Hardware
- Curved Roller Buckle
- Maintenance free
- Choose Black, Red, Blue, Neon Pink, Neon Orange, Neon Yellow, Neon Green, Dark Purple
- Made in the USA
Manufactured by: Sparky Pet
- Bundle of 1 pair of Dogtra Stainless Stel 1 inch Contact Points
- Fits all Dogtra models using female contact points, except YS200 and 150NCP
- Perfect replacement strap for most e-collars, no-bark collars, or tracking collars using a 1-inch strap. Convenient D ring at the buckle. Heavy polyurethane coated nylon is rugged while remaining flexible enough to fit your e-collar or GPS collar.
Product description
744622870039 Features: -Replacement transmitter. -For models 175NCP, 200 Series, 280 Series, 300 Series, 7000 Series, 1100NC, 1200 Series, 1500 Series, 1600 Series, 1700 Series, 1900 Series, 2300 Series, 7100 Series, RR Deluxe. Product Type: -Replacement / Additional Parts. Pet Category: -Dogs. Color: -Blacks & Grays. Generic Dimensions: -2'' H. Dimensions: Overall Height - Top to Bottom: -2 Inches. Overall Product Weight: -0.05 Pounds.
- For Models: 1800 Series 2000TandB Series 2500TandB Series 3500NCP Series RRD System 2200 Series
User questions & answers
Question: | will this work on a 300m |
Answer: | yes. I colored coordinated the collars to make sure I am consistent with the pet setting is on which collar. |
Question: | does this antenna work on dogtra dogtra 282C |
Answer: | Mine didn't, but a quick youtube search did the trick |
Question: | Is this for the element |
Answer: | Yes. I’m very happy with the replacement. Read the instructions to link to the collar. |
Question: | Is this a 2 or 3 inch? It says 3 inch in the description but 2 inch in the about this section |
Answer: | Yes, the Dogtra 200C unit has a 3/4" strap. |
Product description
For 1900S and 1902S receiver. Receiver battery for 1900S and 1902S.
- Make sure you already know which model battery you need before ordering.
- Weight: 0.1lbs.
- Dimensions: 1.25"L x 1.125"W x 0.75"H
- Receiver battery for 1900S and 1902S.
Product description
Replacement handheld transmitter battery for the iQ Plus, 280C and 282C. Replacement handheld transmitter battery for the iQ Plus, 280C and 282C.
- Capacity: 400 mAh.
- Battery Voltage: 3.7V.
- Weight: 0.05lbs. Dimensions: 1.5"L x 1"W x 0.13"H
- Li-Pol. Replacement handheld transmitter battery for the iQ Plus, 280C and 282C.
Product description
For Models: 1800 Series, 2000TandB Series, 2500TandB Series, 3500NCP Series, and RRD :Works with all Dogtra remote dog trainers3 inches tallFor Models: 1800 Series, 2000TandB Series, 2500TandB Series, 3500NCP Series, and RRD :Works with all Dogtra remote dog trainers3 inches tallItem Details:Color: BlackFor Models: 1800 Series, 2000TandB Series, 2500TandB Series, 3500NCP Series, and RRD System. Works with all Dogtra remote dog trainers 3 inches tall
- 3 inch Replacement Transmitter Antenna
User questions & answers
Question: | Will this work with dogtra 2002 t&b |
Answer: | Hello, works fine for me. I can only recommend it |
Question: | Does it work with |
Answer: | I'm sure you could. But you would have to find the same width and thickness of collar. Plus the Same heavy duty non slip rubber type material. Just to be safe and it doesn't slip off. But the electronics are not wired into the collar. Call dogtra, they are very helpful. Or At least they were to me. |
Question: | Will this work on a dogtra 200c |
Answer: | The holes don’t go all the way around the band, so most likely not. Even if you could get it small enough, this would be way too powerful for a small dog. You would have to keep the setting really low, and then if you had a correction situation for the lab, it probably wouldn’t be strong enough. We have 3 dogs and use a separate unit for our small Weimaraner. It is inconvenient, but it has the right amount of power for a 40 pound dog. |
Question: | Does this antenna fit "all" dogtra transmitters? Thank you |
Answer: | The handsfree control can only be used with one dog at a time. |
Product description
The Dogtra iQ PLUS combines all the essential features of a remote trainer in a compact form for dogs that need basic obedience training and behavior management. The iQ PLUS offers an ultra-compact sized receiver and ergonomically designed transmitter with a front-facing dial, which provides a one-handed operation of the stimulation and vibration. The 400-yard range iQ PLUS e-collar outputs a low-mid stimulation in 0-100 levels and is a great tool for all dogs, 10 pounds and up.
- ULTRA-COMPACT DESIGN: This receiver is perfect for small dogs with its compact design. It’s designed for dogs up to 10 pounds or more and is perfect for obedience or field training. It’ll fit comfortably and snug around your small companion.
- ONE-HANDED OPERATION: With 100 stimulation levels, you’ll have no problem finding the perfect level for your pet. The levels can be adjusted with one hand by using the front-facing Rheostat Dial. Finding the settings while in action has never been easier with its “no look” control design.
- CORRECTIONS: With 100 levels of Nick (quick ½-second) and Constant (up to 12 seconds) corrections, you’ll have no problem finding the perfect level for your pet. The levels can be adjusted with one hand by using the front-facing Rheostat Dial.
- EXPANDABILITY: The transmitter comes with a selector switch that enables it to be expandable to two dogs. This allows you to maximize obedience training with up to 2-dogs to get the most out of a training session.
- TRUSTED DURABILITY & RELIABILITY: Made and assembled in South Korea, the iQ PLUS was produced with high quality standards that lead the industry. Our class-leading tools and dedicated customer service team based in the United States enhances your training journey with durable products to ensure the best customer experience.
Product features
Dogtra iQ PLUS
The Dogtra iQ PLUS combines all the essential features of a remote trainer in a compact form for dogs that need basic obedience training and behavior management. The iQ PLUS offers an ultra-compact sized receiver and ergonomically designed transmitter with a front-facing dial, which provides a one-handed operation of the correction and vibration. The 400-yard range iQ PLUS e-collar outputs a low-mid correction in 0-100 levels and is a great tool for all dogs, 10 pounds and up.
EXPANDABILITY
With a medium output and the ability to expand to two dogs, the iQ PLUS is the perfect compact training tool for smaller dogs. This allows you to maximize obedience training with up to two dogs to get the most out of a training session.
ULTRA-COMPACT DESIGN
This receiver is perfect for small dogs with its compact design. It’s designed for dogs up to 10 pounds or more and is perfect for obedience or field training. It’ll fit comfortably and snug around your small companion.
CORRECTIONS
With 100 levels of Nick (quick ½-second) and Constant (up to 12 seconds) corrections, you’ll have no problem finding the perfect level for your pet. The levels can be adjusted with one hand by using the front-facing Rheostat Dial.
Product description
For 280C, 282C and ARC receiver. Receiver battery for 280C, 282C and ARC.
- Make sure you already know which model battery you need before ordering.
- Weight: 0.1lbs.
- Dimensions: 0.75"L x 0.75"W x 0.75"H
- Receiver battery for 280C, 282C and ARC.
Product description
DOGTRA 5/8" Contact Points & 3/4" SPC High Flex Replacement Strap
Replacement Contact Point for Dogtra model
Available 5/8" length. Sold as sets.
Fits all Dogtra models using female contact points, except YS200 and 150NCP.
E-collar, Bark Collar, or GPS Collar Replacement Strap
Perfect replacement strap for most e-collars, no-bark collars, or tracking collars using a 3/4-inch strap. Convenient D ring at the buckle.
Heavy polyurethane coated nylon is rugged and waterproof, while remaining flexible enough to fit your e-collar or GPS collar. And the strap keeps its flexibility - even in cold weather.
30 sizing holes are spaced tightly to allow for a perfect fit. Strap width is 3/4 inch and the length measures approximately 28” inches from one end of the nylon to the other ( including buckle). The unique strap material may be cut to your desired length - no need to worry about the collar unraveling or being damaged.
Both ends and all holes are heat-sealed for a long-lasting, finished look. Smooth, 3 flat rivets add strength and durability, but don't snag.
Strap is maintenance free, easy to clean (just wipe with a damp cloth), resists mildew, bacteria and rotting, and is odor resistant.
Proudly Made in the USA.
Features
- Convenient D ring at buckle
- Polyurethane coating
- Rugged and Waterproof
- High Flexibility
- Tightly spaced Holes allow perfect fit
- 3/4" inch wide
- Approx 28" long ( including buckle)
- Heat-sealed ends and holes
- 3 smooth, flat rivets
- Nickel-plated Hardware
- Curved Roller Buckle
- Maintenance free
- Easy to clean
- Resists mildew and bacteria
- Odor resistant
- Made in the USA
- Convenient D ring at buckle
- Polyurethane coating
- Rugged and Waterproof
- High Flexibility
- Tightly spaced Holes allow perfect fit
Product description
Used for charging multiple dogtra components at one time this splitter is the most common splitter dogtra uses except for older models.
- For all of the newest dogtra models
- Fits selected older models
- Must Check serial numbers for older dogtra models
User questions & answers
Question: | Does this work with the 1400ncp model |
Answer: | Comes fresh but you can freeze fresh dough. |
Question: | Will it work for model: aec-4112b |
Answer: | No, the iPhone 5 is taller and thinner. |
Question: | Will this work with the 7100h model |
Answer: | I doubt it. The 5 is a very snug fit in the CandyShell and the 5c is bigger by about 1/2mm in length width and height. I'd wait for a respin or get the SmartFlex which is more flexible and may work. |
Question: | We have dogtra 280ncpwill this work |
Answer: | I'm not really sure what size "small" means but I have this Speck case for my iPhone 5s & it fits perfectly!! |
Latest Reviews
View all
Hp Mac Compatible Printers
- Updated: 10.01.2023
- Read reviews

Piano Amplifiers
- Updated: 31.03.2023
- Read reviews

Stren Braided Lines
- Updated: 26.06.2023
- Read reviews

Football Training Equipment
- Updated: 30.01.2023
- Read reviews

Most Expensive Scooters
- Updated: 04.06.2023
- Read reviews