12 best mesh safety pool covers

Product description

Durable, long-lasting Blue Wave covers are strong enough to support your entire family, yet light enough to put on or remove from your pool in five minutes or less. These premium covers are made of super-strong two-ply mesh with a break strength of over 4,000 lbs. During use, the cover is held in place with brass anchors that recess flush with your pool deck when the cover is not in use. Rest assured that your children and pets are protected from accidental drowning. In addition to its safety features, Blue Wave safety covers afford excellent winter protection for your pool. Its fine, lightweight mesh allows rain to seep through but screens out leaves and debris. Spring clean up is a snap because no water collects on the cover. The cover comes complete with brass anchors, stainless-steel springs, buckles, installation tools and storage bag. Backed by a 18-Year Warranty.

• Select cover based on your pool size. Actual cover measures approximately 2-ft wider and 2-ft longer
• Comes complete with all hardware to install on concrete decking
• Includes: brass anchors, stainless-steel springs, buckles, installation tools, and storage bag
• Drill and tamp style brass anchoring system permanently secures anchors in concrete
• Multi-seamed stitching ensures safety and prevents wear and tear
• Stainless steel hardware resists damage from the elements
• High scrim mesh panel design lets water though but protects pool against dirt and debris
• Reinforced wear strips on underside of cover to guard against cover abrasion and fraying

User questions & answers

Question:	Will this work with a Kayak Pool, 16 ft x 32 ft? Does it come with the necessary fittings
Answer:	If your pool is in ground and has a cement walk around it, this will work. You can even dig a hole and fill it with cement. And, yes, all the equipment comes with it.
Question:	Just need a new storage bag,Can it be bought separately
Answer:	Hello, Unfortunately we do not carry a replacement storage bag for this safety cover.
Question:	We have a 13 x 29 pool, will the 16 x 32 cover fit
Answer:	Yes, 26x32 cover will be 18x34
Question:	How many anchor points does the 16x32 have
Answer:	It’s 26 not 25! Sorry. I answered incorrectly earlier. My husband pointed out that I had missed one that was underneath the diving board. I couldn’t see it.

Product description

Pool Safety Cover 16x32 ft Rectangle Inground Safety Pool Cover Blue Mesh with 4'x8' Center End Steps Solid Pool Safety Cover for Swimming Pool Winter Safety Cover

We offer you high quality pool cover. It is made of pp material, which is soft and has strong coverage. It has insulation function so you won’t feel very cold when you step in swimming pool if your pool can be heated. At the same time, the swimming pool cover can prevent water evaporation, reduce damage to swimming pool equipment, and save water resources. Finally, it also prevents children and pets from drowning and enhances safety.

Feature:

This swimming pool membrane is well sealed and can be used to heat heated water in winter.

Reduce water evaporation, protect swimming pool equipment from corrosion and prolong service life.

Prevent children and pets from drowning while keeping water clean.

Designed for 16X32 ft swimming pool, reserved size for easy installation.

Polypropylene material, material safety, easy to use, good toughness, high temperature resistance.

Specifications:

Material: Polypropylene

Swimming pool size: 16X32 ft

Center step size: 4X8 ft

Surface: Tight Mesh

Color: Blue

Tension spring: 304 stainless steel

Ground bolt: Brass

Package size: 72X50X50 cm (28.3X19.7X19.7 inch)

Gross weight: 23.8 kg (52.4 lb)

Package Content:

1 X Pool Cover

1 X Tension spring

1 X Ground bolt

1 X A set of installation tools

• 【Good Material】- Soft and tough PP material, environmentally friendly, non-toxic, high temperature resistance.
• 【Reasonable Size】- Suitable for 16x32 ft swimming pool;The size of the swimming pool cover is 18x34 ft
• 【Easy to install】- Comes with installation tools that makes it easy to install at home.You can drill a 40mm deep hole with a 19mm diameter drill bit
• 【Safe Step Section】- 4X8 foot center step, more comprehensive coverage.
• 【High Quality】- After rigorous testing, this product is durable and practical, and can be stored for years with care.

User questions & answers

Question:	how far to the straps extend past the cover
Answer:	40×20
Question:	How do you get old ground bolts out of the concrete
Answer:	Drill them out
Question:	I am seeing conflicting pictures. Does the 4x8 step on the 20x40 cover have 5 or 6 anchor points
Answer:	Hi i have the same cover. It has 5.
Question:	My pool is 21’ x 40’. Is the 20’x40’ pool cover big enough
Answer:	Do not buy this cover! It ripped first year!

Product features

Safety & Child-protective

• The durable pool cover boasts good toughness that can prevent children and pets from drowning while keeping water clean.

High Quality PP Material

• Made of soft and tough PP material, the pool cover has good toughness, high temperature and abrasion resistance.

Easy To Install

• All installation tools are included that makes it easy to install at home. Reinforced webbing for steady and safety.

Rainwater Permeability

• The pool mesh safety cover allows water to pass through easily for the best drainage. Moreover, this swimming pool membrane is well sealed and can reduce water evaporation for better protection.

Prevent Debris& Leaves

• Tight mesh keeps out sundries, resistant to damage caused by pool water, reinforced webbing on the top and bottom of every seam.

Wide Application

• Suitable for all types of pools such as home, garden, hotel, engineering to better protect your pool.

Specification

• Material: Polypropylene
• Swimming pool size: 18x34 ft,Suitable for 16x32 ft swimming pool.
• Center step size: 4X8 ft
• Surface: Tight Mesh
• Color: Green
• Tension spring: 304 stainless steel
• Ground bolt: Brass
• Package size: 72X50X50 cm (28.3X19.7X19.7 inch)
• Gross weight: 21.9 kg (48.3 lb)

Product description

Pool Safety Cover 20x40 ft Rectangle Inground Safety Pool Cover Blue Mesh Solid Pool Safety Cover for Swimming Pool Winter Safety Cover

We offer you high quality pool cover. It is made of pp material, which is soft and has strong coverage. It has insulation function so you won’t feel very cold when you step in swimming pool if your pool can be heated. At the same time, the swimming pool cover can prevent water evaporation, reduce damage to swimming pool equipment, and save water resources. Finally, it also prevents children and pets from drowning and enhances safety.

Feature:

This swimming pool membrane is well sealed and can be used to heat heated water in winter.

Reduce water evaporation, protect swimming pool equipment from corrosion and prolong service life.

Prevent children and pets from drowning while keeping water clean.

Designed for 20X40 ft swimming pool, reserved size for easy installation.

Polypropylene material, material safety, easy to use, good toughness, high temperature resistance.

Specifications:

Material: Polypropylene

Swimming pool size: 20X40 ft

Surface: Tight Mesh

Color: Blue

Tension spring: 304 stainless steel

Ground bolt: Brass

Package size: 72X50X50 cm (28.3X19.7X19.7 inch)

Gross weight: 31.6 kg (69.6 lb)

Package Content:

1 X Pool Cover

1 X Tension spring

1 X Ground bolt

1 X A set of installation tools

• 【Good Material】- Soft and tough PP material, environmentally friendly, non-toxic, high temperature resistance.
• 【Reasonable Size】- Suitable for 20x40 ft swimming pool;The size of the swimming pool cover is 21x41 ft
• 【Easy to install】- Comes with installation tools that makes it easy to install at home.You can drill a 40mm deep hole with a 19mm diameter drill bit
• 【Tight Mesh】-Porous, tight mesh keeps out silt and debris, and damage caused by pool water, reinforced webbing on the top and bottom of every seam.
• 【High Quality】- After rigorous testing, this product is durable and practical, and can be stored for years with care.

User questions & answers

Question:	is a wood anchor kit avaiable
Answer:	I don't recall. Never used it if it did. We just rolled it and secured with bungee cords.
Question:	Would this cover work on an above ground pool that has a substantial wooden deck built around it
Answer:	Yes, when installed correctly, it would easily keep an adult, child, pet from the pool.
Question:	Is this fire resistant
Answer:	Depends on manufacturer and cover style, generally they 3’ 4’ and 5’.
Question:	Do you make 12x24 covers
Answer:	Will this cover fit a 87x77

Product features

Safety & Child-protective

• The durable pool cover boasts good toughness that can prevent children and pets from drowning while keeping water clean.

High Quality PP Material

• Made of soft and tough PP material, the pool cover has good toughness, high temperature and abrasion resistance.

Easy To Install

• All installation tools are included that makes it easy to install at home. Reinforced webbing for steady and safety.

Rainwater Permeability

• The pool mesh safety cover allows water to pass through easily for the best drainage. Moreover, this swimming pool membrane is well sealed and can reduce water evaporation for better protection.

Prevent Debris& Leaves

• Tight mesh keeps out sundries, resistant to damage caused by pool water, reinforced webbing on the top and bottom of every seam.

Wide Application

• Suitable for all types of pools such as home, garden, hotel, engineering to better protect your pool.

Specification

• Material: Polypropylene
• Swimming pool size: 22x42 ft,Suitable for 20x40 ft swimming pool.
• Surface: Tight Mesh
• Color: Green
• Tension spring: 304 stainless steel
• Ground bolt: Brass
• Package size: 72X50X50 cm (28.3X19.7X19.7 inch)
• Gross weight: 31.6 kg (69.6 lb)

Product description

Durable, long-lasting Blue Wave covers are strong enough to support your entire family, yet light enough to put on or remove from your pool in five minutes or less. These premium covers are made of super-strong two-ply mesh with a break strength of over 4,000 lbs. During use, the cover is held in place with brass anchors that recess flush with your pool deck when the cover is not in use. Rest assured that your children and pets are protected from accidental drowning. In addition to its safety features, Blue Wave safety covers afford excellent winter protection for your pool. Its fine, lightweight mesh allows rain to seep through but screens out leaves and debris. Spring clean up is a snap because no water collects on the cover. The cover comes complete with brass anchors, stainless-steel springs, buckles, installation tools and storage bag. Backed by a 18-Year Warranty.

• Select cover based on your pool size. Actual cover measures approximately 2-ft wider and 2-ft longer
• Comes complete with all hardware to install on concrete decking.Fabric Type:Polyethylene
• Includes: brass anchors, stainless-steel springs, buckles, installation tools, and storage bag
• Drill and tamp style brass anchoring system permanently secures anchors in concrete
• Multi-seamed stitching ensures safety and prevents wear and tear
• Stainless steel hardware resists damage from the elements
• High scrim mesh panel design lets water though but protects pool against dirt and debris
• Reinforced wear strips on underside of cover to guard against cover abrasion and fraying

User questions & answers

Question:	Will this cover with stand a Michigan winter i get 24 to 36 inches of snoe in my yard over my pool cover
Answer:	Heavy thick plastic. I love mine it works great and you dont have to lift it all the way up like others. This is my second one my old house had one also with that hot tub. I tried the easy lift and it ended up bending over Tim plus I have a bad shoulder so lifting it up was difficult
Question:	Can you match up the anchors from an existing cover that has gone bad
Answer:	from the mounting surface, to the end of bars is 32 1/2"s , there is a 1 3/4" offset that is 6 inches deep from the top of the bars at the mounting surface that allows for any protrusions around the upper edge, of the tub. hope this helps. Bill
Question:	What is the thread count and thickness
Answer:	Its simple, just set the brackets as shown in the instructions and drive in the screws they send with the brackets. Took about 10 minutes.
Question:	Does the anchors come with the cover
Answer:	I also have rounded corners. It doesn’t matter. Cover is perfect.

Product features

Blue Wave 20-ft x 40-ft Rectangular In Ground Pool Safety Cover

Durable, long-lasting Arctic Armor covers are strong enough to support your entire family, yet light enough to put on or remove from your pool in five minutes or less. Arctic Armor covers are made of super-strong two-ply mesh with a break strength of over 4,000 lbs. During use, the cover is held in place with brass anchors. These anchors recess flush with the deck when the cover is not in use. Rest assured that your children and pets are protected from accidental drowning. In addition to its safety features, Arctic Armor affords excellent winter protection for your pool. Its fine, lightweight mesh allows rain to seep through but screens out leaves and debris. Spring clean up is a snap because no water collects on the cover. The cover comes complete with brass anchors, stainless-steel springs, installation tool and storage bag.

Details

• Drill and tamp style brass anchoring system permanently secures anchors in concrete
• Multi-seamed stitching ensures safety and prevents wear and tear
• Stainless steel hardware resists damage from the elements

• High scrim mesh panel design lets water though but protects pool against dirt and debris
• Reinforced wear strips on underside of cover to guard against cover abrasion and fraying
• Comes complete with all hardware to install on concrete decking

Product description

WaterWarden Pool Safety Covers are UL classified in accordance with ASTM Standard F1346-91, giving you peace of mind that your inground pool will be properly safeguarded. This swimming pool cover features 2-ply strapping that’s triple stitched throughout for maximum strength. All straps have non-corrosive aluminum tips and large X-tacking manually sewn on for added safety and durability. The solid brass anchors recess flush into the pool deck so they don’t pose a tripping hazard when the cover is not in use. Abrasion-resistant pads protect the pool cover from wear at its contact points with your pool decking. The fine, lightweight mesh material of this safety pool cover allows rain to seep through into the pool but screens out leaves, twigs & other debris. This WaterWarden Pool Safety Cover features a generous 1’ overlap on all sides to ensure complete coverage. The overall cover measures 22' x 42' plus a 4' x 8' right step for a 20’ x 40’ inground swimming pool with right step. A tamping tool, installation rod, and hex key are included for installation.

• HIGHEST QUALITY STANDARDS – WaterWarden Pool Safety Covers are UL classified in accordance with ASTM Standard F1346-91, giving you peace of mind that your inground pool will be properly safeguarded.
• ADDED SAFETY AND DURABILITY – This swimming pool cover features 2-ply strapping that’s triple-stitched throughout for maximum strength. All straps have non-corrosive aluminum tips and large X-tacking manually sewn on.
• INSTALLATION HARDWARE INCLUDED – A tamping tool, installation rod and hex key are included for installation. The solid brass anchors recess flush into the pool deck so they don’t pose a tripping hazard when the inground pool cover is not in use.
• SUPERIOR PROTECTION – This mesh safety cover has a break-strength of over 4,000 lbs. Abrasion-resistant pads protect the cover from wear at its contact points with your pool decking.
• FITS A 20’ X 40’ POOL WITH RIGHT STEP – This WaterWarden pool cover features a 1’ overlap on all sides to ensure complete coverage. Overall cover measures 22' x 42' plus a 4' x 8' right step for a 20’ x 40’ inground swimming pool with right step.

User questions & answers

Question:	does this cover come with the plastic covers for the springs
Answer:	They are 4 inches tall, but the cork stopper adds another 1\4 of an inch. The description states 4 inches overall, however that is incorrect.
Question:	is this a solid or mesh cover? if mesh , do you have solid
Answer:	These jars are BPA free and lead free.
Question:	Does this cover help with evaporation
Answer:	I think the size is just right, you can write a short greeting on it.
Question:	Is this a solid cover
Answer:	They could hold two full sets as long as they aren't a chonky set. Normal sized 7 or 11 piece sets will fit wonderfully.

Product description

Southeastern 3 Pack Pool Safety Cover Patch Green Mesh 4" x 8" Self Adhesive

• 3 Pack 4" x 8" Green Pool Cover Patch Kit
• Self Adhesive Peel & Stick Backside adhesive
• Great for small repairs to Mesh Pool Covers

User questions & answers

Question:	does the green and black mesh pattern match looploc's green mesh pattern exactly
Answer:	Over a longer time they do rust. But I've had mine for several years. I use a quartered square of plastic wrap, or a square of used cleaned storage bags to keep the lids from rusting further. I put the small square over the top of the bottle & screw on the lid. Works fine. Don't know why they just don't make the lids out of stainless steel. ¯\_(ツ)_/¯

Product description

Guard your children & pets as you protect your pool. Durable, long-lasting Dirt Defender covers are strong enough to support your entire family, yet light enough to put on or remove from your pool in five minutes or less. These premium covers are made of super-strong two-ply mesh with a break strength of over 4,000 lbs. During use, the cover is held in place with brass anchors that recess flush with your pool deck when the cover is not in use. Rest assured that your children and pets are protected from accidental drowning. In addition to its safety features, Dirt Defender safety covers afford excellent winter protection for your pool. Its fine, lightweight mesh allows rain to seep through but screens out leaves and debris. Spring clean up is a snap because no water collects on the cover. The cover comes complete with brass anchors, stainless-steel springs, and installation tool.

• Lite Strong Mesh Technology
• Drill and Tamp style brass anchoring system permanently secures anchors in concrete
• Multi-seamed stitching ensures safety and prevents wear and tear
• Stainless Steel hardware resists damage from the elements High scrim mesh panel design lets water though but protects
• Reinforced wear strips on underside of cover to guard against cover abrasion and fraying

User questions & answers

Question:	I have an 18 × 36 pool with octagon corners would a rectangular cover work
Answer:	Are you referring to Winter Cover - which comes with a bag ?? The thermal cover has a roller with a handle - it has a black velcro cover for sun protection when not in use on top of the pool water.
Question:	How do I order a custom size with side steps
Answer:	Yes
Question:	do you count the steps when measuring or is that already factored in
Answer:	Did this fit your pool. I have an kidney shape pool same size as well
Question:	Your description says it comes with a storage bag. There wasn't a bag in my kit. Can you advise on this
Answer:	HMMMM....good question. I have not had any problems with my cover. good luck

Product description

Features:

The pool cover with good toughness that can prevent children and pets from drowning while keeping water clean.

The swimming pool cover can protect against sun, snow, ice and wind for maintaining your pool.

Suitable for all types of pools such as home, garden, hotel, engineering to better protect your pool.

Extremely useful for maintaining your swimming pool when not in use.

Safety guarantee with tight mesh by preventing your kids or pets from downing to the pool.

Good drainage and sealing of our inground swimming pool cover.

Suitable for both inground and above ground swimming pool.

Easy to assemble this pool safety cover with manual, tools and accessories.

Specifications:

Material: PP, stainless steel

Size: 18 x 34 Feet

Color: Green

Surface: Tight Mesh

Package includes:

1 x Pool PVC cover

22 x Buckle

22 x Anchor

22 xSpring

1 x Tamping tool

1 x Allen wrench

1 x Tension bar

3 x Patch stickers

• 【TIGHT MESH】With high-density mesh surface design, our pool cover can allow water to pass through easily for the best drainage, while keep the water clean by preventing leaves or debris.
• 【IMPROVED DETAILS】Reinforced webbing of every seam, multi-seamed stitching can prevent wear and tear. Reinforced wear strips on the bottom of the pool safety cover to guard against cover abrasion and fraying.
• 【SUITABLE SIZE】The size of this inground pool cover is 18 x 34 ft, which can match the swimming pool of 16 x 32 ft or any size smaller than the size of the cover. The long side has 6 gaps, the distance between the straps is 1.72m/5.67ft, and the short side only 3 gaps, measures about 1.8m/6ft.
• 【HIGH QUALITY MATERIAL】 Made of premium soft and tough PP material , the pool cover is environmentally friendly with high temperature resistance. The hardware springs equipped are made of stainless steel, which is not easy to rust, last longer service time.
• 【EASY TO INSTALL】 Includes all needed tools and manual, so it is easy to install this swimming pool cover. You can drill a 4cm/1.57inch deep hole with a 1.9cm/0.75inch diameter drill bit. 3 free patch stickers to deal with accidental surface damage.

User questions & answers

Question:	Will the pool safety cover allow rain water through
Answer:	Sure.
Question:	Is this cover uv resident
Answer:	No. Thank you for your question. FamilyPoolFun 320-695-2899
Question:	Weight limit? What if dogs walk on it. We have 3 large breed dogs
Answer:	No, the anchors are made for a concrete deck.
Question:	Can you get the steps cover on the side
Answer:	We went on you tube to get direction

Product description

ARDILA VEELA Pool Safety Cover Patch Repair Kit is the easiest DIY way to fix small holes and tears in your mesh swimming pool safety cover fabric.

Each set has 3 green mesh patches 12 x 8 inches. No tools and skills required.

HOW TO USE:

• Clean and dry the damaged area
• Remove a protective layer
• Attach the repair patch
• Push with a moderate effort for a few seconds

• Using Our Pool Cover Patch Kit is an easiest way to repair tears and abraded areas in mesh or solid safety covers.
• Each Pool Safety Cover Patch Set includes 6 self adhesive patches with dimensions 12 x 8 in.
• Big Pool Cover Patches are easy to use, no tools required.
• Clean and dry the damaged area, remove a protective peel and attach the Pool Cover Repair Patch with a moderate pressure.
• ARDILA VEELA Cover Saver Patch green color makes it suitable for the most popular swimming pool covers.

Product description

WaterWarden Pool Safety Covers are UL classified in accordance with ASTM Standard F1346-91, giving you peace of mind that your inground pool will be properly safeguarded. This swimming pool cover features 2-ply strapping that’s triple stitched throughout for maximum strength. All straps have non-corrosive aluminum tips and large X-tacking manually sewn on for added safety and durability. The solid brass anchors recess flush into the pool deck so they don’t pose a tripping hazard when the cover is not in use. Abrasion-resistant pads protect the pool cover from wear at its contact points with your pool decking. The fine, lightweight mesh material of this safety pool cover allows rain to seep through into the pool but screens out leaves, twigs & other debris. This WaterWarden Pool Safety Cover features a generous 1’ overlap on all sides to ensure complete coverage. The overall cover measures 14' x 26' to fit a 12’ x 24’ inground swimming pool. A tamping tool, installation rod, and hex key are included for installation.

• HIGHEST QUALITY STANDARDS – WaterWarden Pool Safety Covers are UL classified in accordance with ASTM Standard F1346-91, giving you peace of mind that your inground pool will be properly safeguarded.
• ADDED SAFETY AND DURABILITY – This swimming pool cover features 2-ply strapping that’s triple-stitched throughout for maximum strength. All straps have non-corrosive aluminum tips and large X-tacking manually sewn on.
• INSTALLATION HARDWARE INCLUDED – A tamping tool, installation rod and hex key are included for installation. The solid brass anchors recess flush into the pool deck so they don’t pose a tripping hazard when the inground pool cover is not in use.
• SUPERIOR PROTECTION – This mesh safety cover has a break-strength of over 4,000 lbs. Abrasion-resistant pads protect the cover from wear at its contact points with your pool decking.
• FITS A 12’ X 24' POOL – This WaterWarden pool cover features a generous 1’ overlap on all sides to ensure complete coverage. The overall cover measures 14' x 26' to fit a 12’ x 24’ inground swimming pool.

User questions & answers

Question:	Is it possible to put it on a reel system? https://smile.amazon.com/gp/product/b01m6w9sgc/ref=crt_ewc_title_dp_1?ie=utf8&psc=1&smid=a3k59k47qg3ebx
Answer:	Yes, this is a solid green, 20x40 , right step safety cover. SPQ Brands
Question:	Dose anyone have a link for the wood Anchors
Answer:	I wouldn't. For most canning jars, there is a risk of breakage if you pour hot water into a cold jar, or cold water into a hot jar. You may be better served adding warm water to the bottle, and making a small batch of super dark/super infused tea with boiling water in a separate pot, then adding that boiling tea into the warm water in the bottle and give a good shake.
Question:	What do i use for a wood deck around my pool
Answer:	I don't know as I don't do pressure canning. I use them just to store coffee for iced coffee and juices that I have made.
Question:	is it possible to get extension straps with this cover
Answer:	NO! No glass container is freezer safe. Water expands in all directions when freezing. Just because it didn't break this time doesn't mean it won't. Also these have necked down openings, meaning the water will expand up against the sloped sides and jam, cracking it. If you want to freeze you should use disposable soda bottles that you can toss after the freezing stretches the plastic. Or even plastic bags.

Product description

Specification

Color:Green

Size:18x34feet

Material:PP, stainless steel

Suitable for:16x32ft Rectangle Inground Swimming Pool

Package included:

1xPool cover

22xBuckle

22x Anchor

22XSpring

1xTamping tool

1x Wrench

1xTension bar

3xPatch stickers

• 【NECESSARY FOR WINTER】This large pool safety cover is necessary for inground pool from autumn to spring, especially for winter. You can use our cover to protect the pool from falling leaves and snowfall, if you do not need to use the pool.
• 【HIGH QUALITY MATERIAL】Our large pool safety cover is made of tough PP material which is soft, environmentally friendly. Multiple stitches and reinforced wear-resistant strip processing with white scratch-resistant strips on the backprevents wear, very durable. The hardware springs equipped are made of stainless steel, which is not easy to rust, last longer service time.
• 【MULTI-MESH DENSITY DESIGN】Our swimming pool cover uses a unique high-density mesh surface design, allows water to penetrate into the swimming pool while protect the pool from dust and debris.
• 【REASONABLE SIZE】You can choose the safety pool cover based on your pool size. Our cover measures 18x34ft, approximately 2-ft wider and 2-ft longer than pool size, suitable for 16x32ft inground swimming pool. The long side has 6 gaps, the distance between the straps is 1.72m/5.67ft, and the short side only 3 gaps, measures about 1.8m/6ft.
• 【ALL NEEDED HARDWARE INCLUDED】The package contains installation tools, tie rod, tamper, wrench and high-quality hardware accessories, such as metal buttons, rivets, springs. 3 free patch stickers included, is to deal with accidental surface damage. You can check the manual before installation, drill a 4cm/1.57inch deep hole with a 1.9cm/0.75inch diameter drill bit.

User questions & answers

Question:	I already have bolt holes drilled in the ground, will I be able to use the old holes for this cover
Answer:	The water passes through this cover
Question:	Is this pool safety cover easy to put on and take off? Because I want to be able to take off on the weekends
Answer:	Yes. If you need more information we can help you. Thank you for your email. FamilyPoolFun 320-695-2899
Question:	Is this good for fallen leaves
Answer:	This cover has concrete anchors. There is a wood package. Thank you for your interest. FamilyPoolFun 800-950-2210
Question:	How far from the edge of the cover do you install the anchors
Answer:	It is basically a tarp with a tension string around it to tighten it to the pool. It’s heavy duty tarp material. Sorry I don’t have any kind of measurement.

Product description

Pool Safety Cover Patch Kit - repair small holes and tears in your mesh swimming pool safety cover fabric with this universal, do-it-yourself, peel and stick patch kit. Each package contains three sheets measuring 4" x 8". Green.

• Pool Cover Patches Green: designed to repair tears and abraded areas in mesh or solid safety covers.
• Pool Safety Cover Patch Kit: 3 patches per kit 4" x 8".
• Swimming Pool Safety Cover Repair Kit: easy to use.
• Mesh Patch Kit for Pool Cover: self adhesive peel & stick backside adhesive.
• Cover Saver Patch: green color.

User questions & answers

Question:	Can the patch be applied to cover already installed
Answer:	The purpose of the cover is to provide safety for the swimming pool. SPQ Brands