7 best generic pool sand filters

Product description

Sand Filter T-Joint 1.5 & 1.25" Hose Connector for Bestway Coleman Pools

Product description

When your swimming pool filter is in need of a new replacement part, look no further than the Hayward CX900RE Replacement Cartridge Element. This swimming pool replacement part is designed to specifically pair with the Hayward StarClear Plus cartridge filter models C751, C900, C1200, C1750, C1900. This part is precision-engineered, molded and extruded cores help provide maximum hydraulic efficiency and structural stability. All in all, this part will help you get the most out of your Hayward Filter. Don't settle for subpar swimming pool replacement parts. Instead, use the Hayward CX900RE Replacement Cartridge Element for superior performance.

• Fits Hayward C900 Filter

User questions & answers

Question:	Will ft fit c
Answer:	Yes, CX900RE Cartridge Element is the correct element for C900 Series Filter Unit. This is per Hayward replacement parts manual and works great; I have a C900 and this is the element I use.
Question:	We need a 10 x 24 filter. You advertise this as a 10 x 24 but that's not what I received. Wgat are the real dimensions of this filter
Answer:	I do not have the dimensions of this filter. But I purchased this filter once because my pump/filter label listed the C900 as the replacement filter. The factory label was marked incorrectly. If this would help you, I have the 1250 filter. it is 9" in diameter by 19-3/8 long, with a 3" hole in the center....
Question:	is this a genuine Haywood filter
Answer:	I'd get the pleatco. The Hayward works well, thick filter material, but seems to be breaking down on me when I clean it. Pleatco you have to clean more, but the filtering material seems to be more durable
Question:	How long does this filter last before you have to replace it
Answer:	The useful life of a filter element will depend on application, water chemistry, bather load, environment, cleaning and care.
Question:	Are hayward navigator hoses interchangable with this model or do i have to buy a hayward phoenix instead
Answer:	I have an older Navigator and now The Pool Cleaner. They use the same hoses. The Pool Cleaner comes with around 10 standard hose lengths, or about 40' of hose.
Question:	My pool varies from is 33 ft long, 3 1/2 to 10 feet deep, dedicated suction line. Will 2 wheel version work efficiently in the deep end
Answer:	I have a pool 35 feet in length, 18 feet wide, 4 feet to 9 feet deep. I have a solar cover on my pool whenever it is not in use. Started with the 2 wheel version and it had a hard time getting to the opposite end due to the hose moving against the solar pool cover. Got the 4 wheel version and it works excellent. Goes to the other end with no issues and climbs the wall with no problem.
Question:	I'm unclear as to whether hoses come with it and how many
Answer:	Yes 10 1 meter hoses with the two wheel model and 12 hoses with the 4 wheel model. One of the hoses is a special lead hose for each cleaner. Here is the pdf owners manual: http://www.thepoolcleaner.com/PoolCleanerSUCTION.pdf
Question:	Is this the next generation or the original that is sold through Amazon
Answer:	Next generation

Product features

The PoolCleaner

The PoolCleaner is a suction cleaner available in 2 or 4-wheel drive to suit any pool size. Patented features such as self-adjusting turbine vanes ensure maximum power at any flow and effortless debris management. Adjustable skirt and tire treads work in concert with programmed steering to ensure easy wall-climbing, obstacle management and maximized pool coverage.

Self-Adjusting Turbine Vanes

All of The PoolCleaner models have patented self-adjusting turbine vanes. The flexible vanes ensure maximum power at any flow. Their ability to move allows easy passage of large debris to ensure full cleaning with peace of mind.

Robust Tire Treads

One look and you will see the patented tire treads give The PoolCleaner enhanced climbing ability and obstacle maneuverability - especially with main drains. This makes The PoolCleaner ideal for all pool surfaces and shapes.

Steering System

The PoolCleaner has multiple pre-programmed internal steering sequences, which cause the left wheel to periodically reverse, allowing it to turn and then move into another direction. This feature ensures full pool coverage and efficient cleaning.

Interchangeable Throats

3 interchangeable throats allow optimization of suction performance at lower flow and larger debris passage. As such, it is the ideal suction cleaner for use with variable speed pumps.

Hayward Genuine Replacement Filter Cartridges

Hayward cartridges are designed to meet our high quality performance and durability standards with Hayward filters. Only Hayward replacement filter cartridges will provide maximum hydraulic efficiency, exceptional first pass debris removal and extended durability with Hayward Cartridge filters.

Water Clarity

Hayward offers the very latest in pool filter technology ensuring your pool water is clear and clean. Our filters' simplistic operation and low maintenance requirements set standards for performance, value and dependability.

Keep Debris Where it Belongs

When water passes through a cartridge filter, dirt is screened out at the surface of the cartridge element. When clean, the element will trap larger particles, with finer particles being filtered out as the pores of the element become clogged by the larger debris.

Simple Operation, Minimum Maintenance

All Hayward filters are engineered and designed to deliver reliable, all-weather performance with minimal care on today's most demanding installations.

Product description

PureLine Aftermarket Replacement Cartridge for Hayward 150 Sq Ft XStream. This PureLine cartridge replaces the Hayward 150 Sq Ft XStream cartridge. Is your pool water starting to look a little dull? Is your pressure gauge reading a higher PSI than normal? Are your pool jets a little less powerful? These are all signs that it is time to replace your pool filter cartridge. Replace your pool filter cartridge today and regain that crystal clear pool water and extend the life of your pool pump. Typically for single cartridge pool filters we suggest replacing your cartridge every 6-12 months and for filters which take multiple cartridges, we suggest replacing your cartridges every 3 years.

• This Cartridge is Commonly Used In Hayward XStream 150 Sq. Ft. Filter CC150
• Alternate Part #'s 25230-0150S, PXST150, C-8316, C8316, CCX1500-RE, XLS-821, FC-1286, FC1286
• Dimensions - Length: 23 - 1/4", Outside Diameter: 8 - 15/16", Inside Diameter: 4", Filtration Area: 150 Sq. Ft.
• This cartridge does NOT work on the Pentair CC150 Clean & Clear Filter
• This cartridge is 23 - 1/4" Tall. If your cartridge is 17 - 3/16" then you have the CC100 Filter and require the PL0131 Cartridge

User questions & answers

Question:	Will it fit cc1500e Hayward
Answer:	Not sure. Measure your old one. This one is 23 1/8 inches long by 8 7/8 inches round. The hole in the center is 4 inches. I’ve bought this 2 years in a row to swap out the old one and it works great and fits perfectly for mine.
Question:	Looking for replacement cartridge filter for hayward CS150e. Is this the right one
Answer:	Yes, I believe so. It measures 23 1/8 long by 8 7/8 round with a 4 inch hole.
Question:	Will this work on the Hayward cc15093s model
Answer:	Yes this is the correct replacement cartridge for a Hayward cc15093s
Question:	Will this replace cc1750e
Answer:	That is what I order for a Hayward xstream filter

Product description

Pentair 271096 White Bulkhead Union Replacement Set Pool and Spa Filter

• Bulkhead union replacement set
• Fits Pentair Triton II, TR100C and TR140C pool and spa sand filters
• Also fits Pentair Clean & Clear Plus cartridge and FNS Plus D.E. pool/spa filters
• For installations without valve
• Measures 2-1/2-inch length by 2-inch height by 2-1/2-inch width

User questions & answers

Question:	did this come in a set of 2? Picture shows the set of
Answer:	Yes, a set of 2 - just as pictured.
Question:	Is this the part that you attach the hose to (e.g., for backwashing)? In other words, one side of this part screws into the pump and the other side y
Answer:	No, these parts are for direct connection to the sand filter. Backwash connection is on the MPV and is a solvent weld connection to your backwash discharge.
Question:	Is the slip side for 2" pipe. If so, is it male or female
Answer:	A 2" pipe will fit inside this bulkhead fitting.
Question:	if i have a 2 in. pipe that needs to be cut in half would this kit reconnect the pipe where it was cut in half
Answer:	The bulkhead kit connects the Pentair filter to the 2 or 1 1/2 inch CPVC or PVC piping. If you are connecting two pieces of piping, try a union or coupling.
Question:	What country is this gauge manufactured in? any country other than china is ok, usa us the best
Answer:	It's China and very bad quality, it broke after one week
Question:	Is the fitting 1/4 inch on this
Answer:	Yes
Question:	I'm a novice pool owner. My pool guy wants to charge me 160 bucks to replace and install this gauge. Any tips for installing this piece myself
Answer:	Go to hardware store, pick some Teflon tape, go onto You Tube and do a search on swimming pool gage replacement video's or ask a plumber to show you. Unless you have some exotic insulation or some special attachment, 160 is a little bit steep. Of course it may just be a service call and parts pricing. It won't take you much longer than 5 minutes. You just need a wrench to put on the flats of the gage fitting, (the square part above the threads.) Then it's "righty tighty, lefty loosey." Unscrew the old one and put the new one on carefully so as not to cross thread the gage into the plastic fitting.
Question:	does this fit a c17502 hayward filter
Answer:	Yes

Product features

Hayward ECX270861 Boxed Pressure Gauge Replacement for Select Hayward Sand and D.E. Filter

Perflex Extended-Cycle D.E. filters clean pools fast, removing particles as small as two microns the first time through. Its patented Flex-Tube design gives longer cycles between cleaning because the same D.E. filter powder is used over and over.

Product description

Deluxe automatic pool cleaner vacuum with a set of hose included! This item is perfect for efficiently cleaning dirt, leaves, debris, bugs, pebbles and short twigs from your pool; allowing you to spend more time in your swimming pool instead of cleaning it. No wheels or gears means no jamming, breaking or otherwise interrupting the cleaning process. Thinking smarter, not harder, is the key to enjoying your backyard oasis worry-free this summer! Features: Design- Design High efficiency and low maintenance Durable Cleaner - More durable than those cleaners made of thinner PVC Simple Design - There are no wheels to jam, no gears to break Its smart design for easy maintenance Existing Filtration System - Attaches to your existing filtration system. Acts like moving drain, moving more water through the filtration system over a shorter period of time Requirement - Require at least a 3/4 hp swimming pool pump or 1600ghp to function properly Great Energy Saver - The devices navigate around the water by themselves. This means that your pool stays clean without the need to expend your time and effort dragging cleaning implements through the waters Able to Clean Gently and Thoroughly - Soft and thickened pleated seal(base plate) to clean your swimming pool gently and thoroughly, regardless of size, shape, or construction. Clean your pool from top to bottom automatically and effortlessly Effective - Clean a variety of different types of debris from the pool including leaves, twigs, algae and numerous other particles. This can prevent a build-up of debris which could cause damage to the integrity of your pool Recommend for swimming pool up to 16' x 32' No tools required / No electricity needed Package Content: Pool Cleaner Hoses Sets Regulator Valve Manual

• 10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs
• Require at least a 3/4 hp swimming pool pump or 1600 GHP to function properly.
• No tools required and no electricity needed; Attaches to your existing filtration system
• 1 Year Warranty for Parts Replacement (For order purchased from Amazon.com Prime and Ihubdeal ONLY )
• Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Note : Refer to PDF attached below in Technical Specification for User manual

User questions & answers

Question:	what size motor does it need? will it go around on its own
Answer:	I have a 2100 GPH rated filter and the vacuum operates fine.
Question:	Will this unit replace a clogged Kreepy Krauly wall climber
Answer:	We are using it to replace ours...
Question:	Will it work with my 12x24 oval above ground pool
Answer:	Yes. I have a 16x18 above ground pool and 4 works beautifully! Eats the dirt, bugs and algae right up. I highly recommend it. And yes my pool is vinyl, no problems!
Question:	My pool cleaner stopped working after just three months - flapper stopped moving - Suction is great, pool filter is fine, cleaned flapper - now what
Answer:	Jeez. All pool cleaners get jammed every once and a while from debris, leaves, twigs being sucked into the mechanism. If you're going to buy and use your own equipment, you need to learn how to clean out anything it sucked up. With my pine trees, I might have to clean it once a week. To the other people replying--don't blame the product if you don't know how to use it. And yes, if you can't figure out how to clean it, do take it to a pool store. They'll probably show you for free, so great advice from the vendor. Yup, you do have to change the oil in your car, clean your furnace filter, and unclog your drains every once in a while.

Product features

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design - Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design - Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design - Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design - Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

Product description

Hayward cartridge filter elements are made of a superior reinforced polyester material. Hayward elements provide a high degree of water clarity and longer filter cycles. To maintain your pool water cleanliness and clarity, Hayward genuine replacement cartridge elements are the number one choice in cartridge filtration.

• High-quality, reinforced polyester elements provide maximum filtration area and easily trap dirt and debris.
• Precision-engineered extruded core design provides maximum water flow while reducing energy cost.
• Consistent with Hayward high quality and compatible with all Hayward specified chemicals.
• Individually packaged with the Hayward name on end caps and plastic wrap to identify as genuine Hayward parts.
• Diversified sizes to meet both above-ground or in-ground cartridge filter applications.

User questions & answers

Question:	for just one cartridge
Answer:	Yes. This filter runs for close to $50.00 at the pool store and they have to order it as well-not in stock.
Question:	Is this a genuine oem hayward cx580xre cartridge or is that just a misleading picture and the item is “by pleatco” as depicted under the title? thanks
Answer:	Most likely they are made by Pleatco but branded as Hayward. Hayward, I understand, does not actually make the fabric filters for their filter systems but contracts with other companies to make them. BTW, I just installed Pleatco branded filters in my system; they work fine and are cheaper at Amazon than Hayward branded ones.
Question:	Whats the top hole diameter
Answer:	3" top & bottom.
Question:	Will this fit 5030 filter
Answer:	I have a C2030. It holds 4 filters. The owners manual list 5 models of top manifold cartridge filters, one of which is the C5030.

Product features

Hayward Genuine Replacement Filter Cartridges

Hayward cartridges are designed to meet our high quality performance and durability standards with Hayward filters. Only Hayward replacement filter cartridges will provide maximum hydraulic efficiency, exceptional first pass debris removal and extended durability with Hayward Cartridge filters.

Water Clarity

Hayward offers the very latest in pool filter technology ensuring your pool water is clear and clean. Our filters' simplistic operation and low maintenance requirements set standards for performance, value and dependability.

Keep Debris Where it Belongs

When water passes through a cartridge filter, dirt is screened out at the surface of the cartridge element. When clean, the element will trap larger particles, with finer particles being filtered out as the pores of the element become clogged by the larger debris.

Simple Operation, Minimum Maintenance

All Hayward filters are engineered and designed to deliver reliable, all-weather performance with minimal care on today's most demanding installations.

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.