11 best chipper shredder mulcher

Product description

Quickly turn your yard debris into nutrient-rich garden mulch and do your part to reduce, reuse and recycle with the Sun Joe Chipper Joe electric chipper/shredder. Powered by a robust 14-amp motor, the CJ601E electric wood chipper and shredder generates speeds of up to 4,300 revolutions per minute, making quick work out of the brush, leaves and branches overcrowding your lawn. Designed for light-duty jobs, this wood chipper effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick, reducing your yard waste up to 1/16th its original size. The minimized wood chips resulting from Chipper Joe’s efforts are perfect for use as garden mulch around your trees and flower beds. Easy to assemble and virtually maintenance free, the Chipper Joe electric chipper and shredder is ready to go when you are. Just plug it in and instantly start chipping! Unlike gas-powered tools, the electric-powered Chipper Joe means you don’t have to deal with smoke, fumes, unpredictable starters and costly tune-ups. The CJ601E also features a safety stop that automatically engages when the hopper is opened. The Chipper Joe electric wood chipper/shredder is ETL-approved and backed by a full two-year warranty.

• POWERFUL: 14 amp motor effectively chips and shreds branches up to 1. 5-inches thick. No load speed is 4300 rpm
• MULCHING: Ideal for turning branches and twigs into nutrient-rich garden mulch, reducing your yard waste up to 1/16th its original size
• PORTABLE: 6-inch wheels for easy portability
• SAFETY HOPPER: Locking knob prevents the motor from operating when opened

User questions & answers

Question:	I had a load of wood chips delivered from a tree service and those chips are kind of large. Will this chip those chips down to a smaller size
Answer:	Page 9 of the engine manual shows SAE 30 for temps from 50 to 100+F but it probably won't make any difference since 10w - 30 will be the same once warmed up. The manual actually calls for 15w - 40 for most of the temp range but again any difference will not be significant with your average temps.
Question:	Will this handle rose clippings? Thanks
Answer:	Actual amount of oil is in the manual, but it is less than a quart.
Question:	How well does it do with bamboo? I have the yellow groove variety. Some of the stalks are over 1 inch thick
Answer:	Not really.
Question:	I just bought a few acres with thousands of 1 inch diameter "weed" trees on it. Can I run this for several hours a day every day
Answer:	The owners manual for the engine says to add fuel stabilizer if an ethanol blend is used. Like everything else it's all made in China. This is only useful for the smallest branches and twigs, I used it for 2" or smaller oak and manzanita branches and the cutters dulled quickly. Pine branches with needles clogged it up quickly. There's an access panel to get to the blades to sharpen them but you still need to take it apart to get them completely off. I'm thinking about sending it back.
Question:	Manual recommends sae 30 oil, but this page recommends 10w-30 - which is correct? average temp here is 50-90 degrees fahrenheit
Answer:	What you see is what you get. The white plastic insert comes out and you plug in your extension cord. This machine is a beast. It will "devour" a pile of freshly (day old) cut shrubs in a short time. I "processed" a pile of trimmed crape myrtles 12'x12'x4' in less than 2 hours. I chip/shred into a kids plastic swimming pool and then shovel the results into a single 50 gallon bag that weighed nearly 50 lbs. The "beast" never clogged or stopped running the entire 2 hours.
Question:	So oil is not included. how much oil is needed
Answer:	Terrible. I purchased it for that reason; I wanted a sturdy, toothed shredder, not one of those glorified string trimmers. However, the feed throat is only 5"x1 1/4", large enough for about five leaves at a time. And those leaves I did feed through the machine came out the discharge chute slightly mangled, but certainly not shredded. I set it in the back of the shed, sadder but wiser, and bought a Toro 51621 UltraPlus shredder vac. Emptying the bag is a hassle, but it really sucks up the leaves, and pulverizes them. If you can handle the leaf dust, it would make quick work of your leaves using it without the bag.
Question:	Self feed feature
Answer:	I owned the CJ602E briefly. The cutting blades operate entirely differently for each machine. For the (2) they are more like guillotines. Whirring by and cutting, inch by inch as the material is pulled down by gravity. The (2), also jams much more easily, with the only remedy being...turn off the machine, unplug it, unscrew the locking bolt to the hopper, lift the hopper, find the culprit, and manually rotate the wheel that holds the blades in the opposite direction with a stick or a gloved hand until the "culprit" breaks free, pull it out, close the hopper, screw the hopper bolt back down tight, plug it in, turn it on, and proceed. You can hit the reset switch too for good measure. Now with the (3), it rarely jams due to its "squirrel wheel" design. When you look into the hopper, it is as if your are viewing the top of a "squirrel wheel." The material is pulled to the right and then crushed inbetween the wheel and a counter plate. (3) slows down as it processes the bigger pieces of material, but rarely, if ever, stops. Also, you always have the option of reversing the wheel, which spits everything back up/out. It is not perfect. Occasionally, a branch gets cut into an awkward size due to a protruding limb that gets snapped in half...and just rattles around in there. A stick and patience and time usually solves this, but every once in a blue moon, you have to turn off the machine, disconnect the power, and go fishing with a metal hanger. The chunks from (3) are much larger than (2), and often not as clean looking due to the tremendous efficiency of the guillotine like action of (2). The shear number of times that you spend unjamming (2), makes it a much less efficient use of your time. Let's face it, most of us do not love yardwork. We do it because it has to be done. We don't want it to take any longer than it has to... as we have other things to do with our time. So, spend the few extra bucks and get (3). The work will get done, it will look almost as good as (2), and you can get on with your life.
Question:	No ethanol what do you do if you live in california says carb compliant we have ethanol? who's engine is it where made
Answer:	I owned the CJ602E briefly. The cutting blades operate entirely differently for each machine. For the (2) they are more like guillotines. Whirring by and cutting, inch by inch as the material is pulled down by gravity. The (2), also jams much more easily, with the only remedy being...turn off the machine, unplug it, unscrew the locking bolt to the hopper, lift the hopper, find the culprit, and manually rotate the wheel that holds the blades in the opposite direction with a stick or a gloved hand until the "culprit" breaks free, pull it out, close the hopper, screw the hopper bolt back down tight, plug it in, turn it on, and proceed. You can hit the reset switch too for good measure. Now with the (3), it rarely jams due to its "squirrel wheel" design. When you look into the hopper, it is as if your are viewing the top of a "squirrel wheel." The material is pulled to the right and then crushed inbetween the wheel and a counter plate. (3) slows down as it processes the bigger pieces of material, but rarely, if ever, stops. Also, you always have the option of reversing the wheel, which spits everything back up/out. It is not perfect. Occasionally, a branch gets cut into an awkward size due to a protruding limb that gets snapped in half...and just rattles around in there. A stick and patience and time usually solves this, but every once in a blue moon, you have to turn off the machine, disconnect the power, and go fishing with a metal hanger. The chunks from (3) are much larger than (2), and often not as clean looking due to the tremendous efficiency of the guillotine like action of (2). The shear number of times that you spend unjamming (2), makes it a much less efficient use of your time. Let's face it, most of us do not love yardwork. We do it because it has to be done. We don't want it to take any longer than it has to... as we have other things to do with our time. So, spend the few extra bucks and get (3). The work will get done, it will look almost as good as (2), and you can get on with your life.

Product features

Chip Away!

Chipper Joe generates speeds of up to 4,300 revolutions per minute, making quick work out of the brush, leaves and branches crowding your lawn. Chipper Joe effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick.

Quickly turn your yard debris into nutrient-rich garden mulch and do your part to reduce, reuse and recycle with the Sun Joe Chipper Joe electric chipper/shredder. The minimized wood chips are perfect for use as garden mulch around your trees and flower beds.

Powerful 14 Amp Motor

Chipper Joe is powered by a 14-amp motor generating speeds of up to 4,300 RPM to make quick work of the brush, leaves and branches on your lawn.

Safety Features

Featuring a safety hopper locking knob to prevent the motor from operating when opened and a reset button in the event the chipper is overloaded.

16:1 Reduction Ratio

Quickly turn your yard debris into nutrient-rich garden mulch. Effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick.

Product description

This is the GreatCircle LCE01, 7 HP Heavy Duty 212cc Gas Powered Wood Chipper/Shredder for Lawn and Garden. This 3 in 1 multi-function capable Wood Chipper design comes with a top hopper for volume chipping; Side chute for small branch and limb; a shredder and access to back vacuum inlet for leaf loading w/ the purchase of a Vacuum Kit. This Wood Chipper has a 3" max Wood Diameter chipping capacity that can handle tough jobs with without a problem and 1/2" shredder capacity. It features a powerful recoil starting 7 HP/ 212cc gas engine (87+ unleaded NO ETHANOL RECOMMENDED) (ENGINE OIL NOT INCLUDED,MUST ADD OIL BEFORE USE).

• MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• EFFICIENT DESIGN; Hookup your favorite: ATV, lawn mower or small tractor, for easy transportation with a Tow Bar Kit (SOLD SEPARATELY) and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (SOLD SEPARATELY)
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	Where can I get blade replacements for this chipper
Answer:	Not tried privet hedge, did very well with fir tree clippings and branches. The branches handled were over 1.5IN and it just chipped away. Very pleased with this purchase, not the cheapest shredder but works extremely well.
Question:	What is the assembly involved for this piece of eqpmt
Answer:	This device is pretty strictly a chipper and does not do any shredding. Depending on the size of the mulch/nuggets it would definitely chip them down in to finer pieces, but you'd really need to control how many you put in at a time. Also there is an adjustment to where you can tighten it down to chip smaller pieces, but you'll just have to experiment to see what works best and gets you the smallest chips without clogging/stopping the device.
Question:	Does it come assembled
Answer:	Use a 16 gauge, 3 prong outdoors extension cord.
Question:	whats the difference between a 850 & 950 engine
Answer:	Dear customer: This shredder works on Bamboo stalks, but it depends on its size and dryness. The dry wood turns into sawdust basically, the more wet wood will create larger pieces – The combination of dry and more wet wood makes the best chipped output mixture. Also bear in mind, do NOT use fresh wood that is still green – it needs to dry out for a few days otherwise it can become gummy in the shredder and ruin the mechanism/blades. You can’t do big branches over 1.77″ – so large logs won’t go in – don’t even try, and you can’t get them into the slot anyway. You will know what you can put in based on the hole size at the top slot. If you have branches that have offshoots going in all crazy directions, clip those off so that they don’t cause issues with the chipper sucking in the branch. The main pieces should be fairly straight to go down easily. Hope this answer will help you and thanks for your question！

Product description

Quickly turn your yard debris into nutrient-rich garden mulch and do your part to reduce, reuse and recycle with the Sun Joe electric chipper/shredder. Powered by a robust 15-amp motor, the CJ602E electric wood chipper and shredder generates speeds of up to 4,300 revolutions per minute, making quick work out of the brush, leaves and branches overcrowding your lawn. Designed for light-duty jobs, this wood chipper effectively chips and shreds wooden sticks and limbs up to 1.5-inches thick, reducing your yard waste up to 1/17th its original size. The minimized wood chips resulting from Sun Joe’s efforts are perfect for use as garden mulch around your trees and flower beds. Easy to assemble and virtually maintenance free, the Sun Joe electric chipper and shredder is ready to go when you are. Just plug it in and instantly start chipping! Unlike gas-powered tools, the electric-powered Sun Joe means you don’t have to deal with smoke, fumes, unpredictable starters and costly tune-ups. The CJ602E also features a safety stop that automatically engages when the hopper is opened. The Sun Joe electric wood chipper/shredder is ETL-approved and backed by a full two-year warranty.

• Ideal for turning branches and twigs into nutrient-rich garden mulch
• Powerful 15 amp motor effectively chips and shreds branches up to 1.5-Inches thick
• Compact design with 6-inch wheels for easy portability
• Safety hopper with locking knob prevents the motor from operating when opened
• ETL approved; Full 2-year warranty. No load speed (rpm) - 4100 rpm

User questions & answers

Question:	What is the difference between this and the 14 amp model apart from the slightly higher current draw? I'm wondering why they would make two models
Answer:	Could be your speaker wire getting some interference
Question:	Is this loud? Like obnoxiously irritate-the-neighbors loud? I live in a townhouse in close proximity to my neighbors. Thanks
Answer:	Dear customer, the Bluetooth frequency may be causing interference. Please try to separate the devices. But there may also be a problem with the wire. If the problem still cannot be solved, would you please take a video to us?
Question:	Does the unit jam up easily? When it jams, what is the process to clear it and get it running again
Answer:	Dear customer, this amplifier supports AUDIO/ USB / wireless connection. Easily connected to external audio sources such as DVD / TV / Computer/ Phones/ ipad / MP3 player via the RCA (L/R) of audio input. And through USB input, you can connect the amplifier to a USB flash drive, supporting music formats including MP3 / APE / WAV / WMA, etc. You can refer to the product parameter to see if it is suitable for your speaker.
Question:	Would this work for my neighbor
Answer:	Dear customer, the system can only receive one model individually, so it can only be paired with one.

Product features

Reduce, Reuse and Recycle

Quickly turn your yard debris into nutrient-rich garden mulch and do your part to reduce, reuse and recycle with the Sun Joe electric chipper/shredder. Powered by a robust 15-amp motor, the CJ602E electric wood chipper and shredder generates speeds of up to 4,300 revolutions per minute, making quick work out of the brush, leaves and branches overcrowding your lawn. The minimized wood chips resulting from Sun Joe’s efforts are perfect for use as garden mulch around your trees and flower beds.

Powerful 15 Amp Motor

The powerful 15 amp motor effectively chips and shreds branches up to 1.5 inches thick.

Instant Start

The CJ602E features an instant-start switch located under the safety hopper.

Safety Hopper

The CJ602E features a safety hopper and locking knob that prevents the motor from operating when opened.

Product description

This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 2.5" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute. The ability to hook up your Chipper to your own personal ATV, lawn mower/small tractor, allows for easy transportation on your land to where you need it, w/ the purchase of a Tow Bar Kit (SOLD SEPARATELY)

Our Wood Chipper Shredder comes has a Cutting Edge Engine supplied by KOHLER. Boasting a 6.5 HP 196cc Horizontal 4-stroke Single Cylinder OHV Gas Powered design. Spinning at a 3600RPMs & a rowdy 10.5 ft lbs of torque, it can handle loads up to 3" diameter wood without a problem. User-Friendly features like the Ultra-Quiet Operation, Easy-Pull Recoil Starter & easy pour Accu-Fill design. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 2 Quarts(2.1L).

Our Wood Chipper is approved on all fronts and is Emission Compliant with CARB PHASE III & EPA Phase III. The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED).

• POWERFUL & EFFICIENT - This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 2.5" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute
• CAPABLE DESIGN - Our Wood Chipper Shredder comes has a Cutting Edge Engine supplied by KOHLER. Boasting a 6.5 HP 196cc Horizontal 4-stroke Single Cylinder OHV Gas Powered design. Spinning at a 3600RPMs & a rowdy 10.7 ft lbs of torque, it can handle loads up to 3" diameter wood without a problem. User-Friendly features like the Ultra-Quiet Operation, Easy-Pull Recoil Starter & easy pour Accu-Fill design. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 2 Quarts(2.1L)
• SAFETY & PROPER USE - Our Wood Chipper is approved on all fronts and is Emission Compliant with CARB PHASE III & EPA Phase III. The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED)

User questions & answers

Question:	Will this shred leaves
Answer:	It is good at chopping up sticks. It will be difficult to feed the chips into it. It may work but it will be more work than it is worth.
Question:	Wondering if this chipper is good for dry hard wood? I have tons of dead ash
Answer:	No
Question:	Will this shred bamboo
Answer:	I have never used it on bamboo, but it does very well on branches of sheflera and allspice up to a little more than two inches in diameter. Since bamboo is hollow it should do well. I really like my machine , use it weekly, and will buy another one if I need to.
Question:	Dose this greatcircleusa mini chipper come with a warranty
Answer:	I have had two of these. The first lasted 2 days and it was run for 4 hours each day then it stopped. Amazon replaced the chipper with no trouble. The second chipper is WONDERFUL. I only chip up to 1" trees/branches and this thing is a monster. I have used this for at least 10 days in a row for 4 hours a day. I just sharpened the blades and it is still cutting great.

• EFCUT C30 MINI Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 4 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves into mulches.
• EFCUT C30 MINI Wood Chipper Shredder can easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 15:1
• EFCUT C30 MINI Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity
• EFCUT C30 MINI Wood Chipper Shredder has a unique designed check windows for faster replacement of blades, making your gardening work more efficient.
• EFCUT C30 MINI Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder

User questions & answers

Question:	what's the package dimensions
Answer:	I would use Facebook messenger to contact Great Circle. They are very responsive and will send you a link where you can get replacement blades.
Question:	If there is a problem, can it be returned and how
Answer:	mine came assembled with the exception of the hopper cover, small side shute, handle, wheels and base stand. Pretty easy to put together. took about 45 min.
Question:	Is the product description indicating that the longest branch it can accept is 10” long
Answer:	I tried to write a review about this, and Amazon cancelled it twice! I STRENUOUSLY recommend against buying this until they get their packaging issues sorted out. It does come mostly assembled. You have to install the wheels, handlebar and foot-bar. But in the case of my recent order, it arrived damaged because the packaging is so terribly inadequate. We jumped through a few hoops to return it, and ordered a replacement. It arrived with even more damage! It is shipped in a simple cardboard box with terribly insufficient bands of very thin (1/8th inch) wood stapled together. That arrangement might be JUST enough protection when they are still in original shipment on a pallet. But it is woefully inadequate for the treatment it receives once it's in the 'care' of the final shipper. BEWARE!
Question:	Where is this product made?where is this product made
Answer:	100

Product features

EFCUT C30 MINI 7HP 212cc Wood Chipper Shredder & Mulcher Max 3" Chipping Capacity Reduction Ratio 15:1

EFCUT is not only committed to designing more unique highlights but also focusing on more reliable machine quality.

EFCUT adopts independent product development and self-manufacturing and is the sole owner of the brand.

EFCUT has always kept in mind the design concept of continuous innovation and never stop progress. We always strive for the advanced idea and leading ability. To make a difference is our eternal pursuit.

The ultra-high cost performance of EFCUT can meet your needs perfectly!

High Reduction Ratio Cutting System with 15:1

• 2 blades together with 4 hammers cut wood branches into shreds, grilling device on the discharge outlet continue to turn shreds into mulches.
• In addition to the HSS blades, the structure of the unique hammers makes your branches not only chips but also mulch!

Verified Purchase Buyers Review Sharing：

"The chipper is easily maneuverable and can be pulled into areas with all sorts of ground debris."

" It packs up neatly and can be stored in the garage. It was easy to assemble and easy to move. It handles our small fruit tree limbs without a problem and it provides lots of free mulch to assist us in our natural landscaping."

Unique Check Window for Easy Maintenance

• Whether to replace the blade or check the blockage, it could provide a faster replacement of blades and easier to clean the blockage. And the chipper has a longer average time between failures (MTBF).
• With a quick check window, you can easily clean up obstructed debris and replace blades even with no need to open the cavity cover. Greatly save your time and reduce more tedious steps.

Multi-purpose Counter to Know the Next maintenance

• The counter could be used for regular maintenance of the machine, blade replacement, oil change. Using it to record the chipping hours, which will make you easily know the next time to resharpen the blade or add oil.
• Long press to power on/off. When the engine stops, make the running timer power off, when the chipping time is up to 3hrs, check a sharpening or replacement of blades if in need.

Oil Absence Protection for More Security

The machine will not be able to run when the oil runs out, protect the machine from damage due to less oil. The excellent low oil level sensor allows you to no longer worry about safety.

13 5/8 x 12 1/4 inch hopper

• Wide hopper makes feeding big branches with leaves easy and quick.
• The 3-inch scale sticker can perfectly help you gauge the diameter of branches.
• Thick anti-burst hopper rubber protection device to double your safety factor.

MAIN SPECIFICATIONS

C30 MINI Wood Chipper is powered by Recoil Starting SHINERAY 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine

• Max Power & Speed：4.2 KW / 3600 RPM

• Max Torque : 13.5 N.m / 2500±100 RPM

• Bore x Stroke & Cooling System：70 mm x 55 mm & Forced Air Cooled

• Ignition & Lubricating Type：Induction ignition & Splashing

Light-weight Design only 88.2 LBS

• More portable with 88.2 LBS and easy to move with 39.4-inch height.
• Still of high quality and stable, even lighter than EFCUT C30 Wood Chipper.
• It can be used for the everyday DIY homeowner with land or for 'On-the-Go' landscapers/keepers.

10" all terrain tires

Rugged all-terrain 10x 2 3/4 inch diameter airless rear wheels enhance the ability to move around the garden.

High-Quality Blade Material

Excellent Blade - We adopt a unique HIGH-SPEED steel blade, and with the hammers perfect match, to cover more great rich mulch. Especially the well-chosen blade material after multiple tests makes the resharpening and replacement interval longer, and greatly reducing the probability of the blade tipping and bent.

Product description

SPECIFICATIONS - This All Electric Leaf Mulcher Shredder is designed w/ a durable Heavy Duty Steel Upper Feeding port & Body. We are powering this machine with all powerful 15-AMP 1800 Watt 120VAC 60Hz Electric Belt Driven motor, capable of 0.5”inch (12.7mm) MAX Diameter small branches/ twigs. Providing consistent speeds with 11" (280mm) inch blades gyrating at 4,100RPMs. Unlike gasoline powered chippers this electric Leaf Mulcher produces no smog & is quieter, making it ECO & USER FRIENDLY.

Great choice for Green Renewable recycling & Waste Management.The durable Steel housing is supported by a firm & sturdy powder coated steel frame, protecting the motor assembly.. Our Leaf Mulcher is equipped w/ an instant start switch & Overload Protection switch. Included are 6” wheels to make transporting easy. Great choice for Green Renewable recycling & Waste Management.The durable Steel housing is supported by a firm & sturdy powder coated steel frame, protecting the motor assembly.. Our Leaf Mulcher is equipped w/ an instant start switch & Overload Protection switch. Included are 6” wheels to make transporting easy. Waste Catch Bag Made of Durable PP fabric with PE coating, which is water and tear resistant.

Our Electric Leaf Mulcher Shredder is OSHA, RoHS, ISO: 9001, 14001, CNAS, SQC, IAF, CSA, EL, cETLus, Intertek GS Listed approved standards & certified, including cull quality tested. Always use the correct extension cord type/size for the distance of extension needed, refer to the owner’s manual on page E2 for recommended instructions, also always connect Wood Chipper to a GFCI outlet. Landworks Leaf Mulcher Shredder are best suited for outdoor environments.

• SPECIFICATIONS - This All Electric Leaf Mulcher Shredder is designed w/ a durable Heavy Duty Steel Upper Feeding port & Body. We are powering this machine with all powerful 15-AMP 1800 Watt 120VAC 60Hz Electric Belt Driven motor, capable of 0.5”inch (12.7mm) MAX Diameter small branches/ twigs. Providing consistent speeds with 11" (280mm) inch blades gyrating at 4,100RPMs. Unlike gasoline powered chippers this electric Leaf Mulcher produces no smog & is quieter, making it ECO & USER FRIENDLY
• DESIGN & CAPABILITIES - Great choice for Green Renewable recycling & Waste Management.The durable Steel housing is supported by a firm & sturdy powder coated steel frame, protecting the motor assembly.. Our Leaf Mulcher is equipped w/ an instant start switch & Overload Protection switch. Included are 6” wheels to make transporting easy. Waste Catch Bag Made of Durable PP fabric with PE coating, which is water and tear resistant.
• SAFETY & PROPER USE - Always use the correct extension cord type/size for the distance of extension needed, refer to the owner’s manual on page E2 for recommended instructions, also always connect Wood Chipper to a GFCI outlet. Landworks Leaf Mulcher Shredder are best suited for outdoor environments.

User questions & answers

Question:	Can this be left outside in the rain or does it need to be moved inside when it rains
Answer:	Inside because of the electric motor
Question:	I have a very mature sycamore tree with leaves that are extra large and rather leathery - they do not much well. Think this machine can handle them
Answer:	We have oak trees. The machine handled those leaves very well. Make sure the leaves are dry.
Question:	Can the cutting blades be adjusted for course or finer mulching
Answer:	No, there are 3 separate but fixed blades inside the machine.
Question:	What's the part number for replacement blades and where can I buy them
Answer:	Check the instructions and website

Product description

This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 3" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute. The ability to hook up your Chipper to your own personal ATV, lawn mower/small tractor, allows for easy transportation on your land to where you need it, w/ the purchase of a Tow Bar Kit (SOLD SEPARATELY).

Our Wood Chipper Shredder comes has a powerful recoil starting Rato 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handling up to 3" diameter wood without a problem. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 0.7 gallons.

The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED). This wood chipper comes with a 3-year limited. We have a dedicated customer support team stand behind our chippers, so you can trim your trees with ease knowing that we are always here for you.

• EFFFICIENT PERFORMANCE; This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and debris
• UNIQUE DESIGN; Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	Manual recommends sae 30 oil, but this page recommends 10w-30 - which is correct? average temp here is 50-90 degrees fahrenheit
Answer:	Hi. It can be stretched up to 6.5 feet
Question:	So oil is not included. how much oil is needed
Answer:	Please go to our store front or search for Home4 for the other color. Thanks
Question:	Self feed feature
Answer:	It would not work well on a straight wall. It is shaped like a V and you need to extend all of the points to make the basket that the stuffed animals sit in.
Question:	No ethanol what do you do if you live in california says carb compliant we have ethanol? who's engine is it where made
Answer:	Hi. It's designed in USA and made in China.

Product description

This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 3" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute. The ability to hook up your Chipper to your own personal ATV, lawn mower/small tractor, allows for easy transportation on your land to where you need it, w/ the purchase of a Tow Bar Kit (SOLD SEPARATELY).

Our Wood Chipper Shredder comes has a powerful recoil starting Rato 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handling up to 3" diameter wood without a problem. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 0.7 gallons.

The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED). This wood chipper comes with a 3-year limited. We have a dedicated customer support team stand behind our chippers, so you can trim your trees with ease knowing that we are always here for you.

• EFFFICIENT PERFORMANCE; This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and garden debris
• UNIQUE DESIGN; Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines

User questions & answers

Question:	where can we get replacement blades for this chipper
Answer:	No. Won't even shred branches over 1 inch.
Question:	I am thinking of using this to chop hay from a bale. I need it to be 1-3 inches long. Is this possible or will it be turned into too fine of pieces
Answer:	Based on my experience so far, you should be fine if you keep the branches under 2" in diameter. There's only so much a 6HP engine can do. I've fed it dogwood, Maple, and eucalyptus and it only really struggled with the eucalyptus.
Question:	Is there a tow bar for this chipper
Answer:	Not sure mine chokes out on 1 1/2 inch branches.
Question:	How much wood would this wood chipper chip if this wood chipper could chip wood
Answer:	No idea but the one I have runs like a champ. Absolutely no problems with it and I'm totally satisfied.

Product description

This All Electric Corded Wood Chipper Shredder & Mulcher is designed w/ a durable Polypropylene body & all powerful 15-AMP 1800Watt 120VAC 60Hz Electric Belt Driven motor, capable of 1.57” (39mm) MAX Limb Chipping Capacity to 17:1 Reduction w/ a Speed of 4,100RPMs. Unlike gasoline powered chippers this electric wood chipper produces no smog & is quieter, making it ECO & USER FRIENDLY. Included are a set of Dual Edge Blades that are Reversible, giving longevity for extended use.

The durable Polypropylene housing will not rust nor dent & protects the rotor assembly which consists of the Cutting Blades for maximum chipping capability. Our Wood Chipper is equipped w/ an easy instant start switch & a Overload Protection switch. Also included is a Supply Cable of 13.7” (0.35m/1.1’) & transported easily w/ the 6” Wheels giving great portability. We included a Sturdy Push Paddle, so you can safely feed material into the hopper.

Our Electric Wood Chippers are cETLus, Listed approved standards & certified, including cull quality tested. Always use the correct extension cord type/size for the distance of extension needed, refer to the owner’s manual on page E2 for recommended instructions, also always connect Wood Chipper to a GFCI outlet. Landworks Wood Chippers are best suited for outdoor environments.

• SPECS - This All Electric Corded Wood Chipper Shredder and Mulcher is designed w/ a durable Polypropylene body and all powerful 15-AMP 1800Watt 120VAC 60Hz Electric Belt Driven motor, capable of 1.57” inch (39mm) MAX Limb Chipping Capacity to 17:1 Reduction w/ a Speed of 4,100RPMs; Unlike gasoline powered chippers this electric wood chipper produces no smog and is quieter, making it ECO and USER FRIENDLY
• EFFICIENT DESIGN and CAPABILITIES - The durable Polypropylene housing will not rust nor dent and protects the rotor assembly which consists of Cutting Blades for maximum chipping capability; Our Wood Chipper is equipped w/ an easy instant start switch and a Overload Protection switch; Also included is a Supply Cable of 13.7” inch (0.35m/1.1’); transported easily w/ 6” inch Wheels giving great portability; Included is a Sturdy Push Paddle, so you can safely feed material into the hopper
• SAFETY and PROPER USE - Our Electric Wood Chippers are cETLus Listed approved standards and certified, including cull quality tested, Always use the correct extension cord type/size for the distance of extension needed, refer to the owner’s manual on page E2 for recommended instructions, also always connect Wood Chipper to a GFCI outlet, Landworks Wood Chippers are best suited for outdoor environments

User questions & answers

Question:	Can this also shred yard waste...weeds, leaves
Answer:	I think this is very close, I cut the opening to install mine. I was thinking 1.5x 1
Question:	Does this really chip pine needles
Answer:	The hour meter only works with direct current. If the generator has a D.C. output, up to 72 volts, then the meter should work. Many generators have an output capable of charging a12-volt automotive battery, and this could be used to power the meter if the Champion generator has such an arrangement.
Question:	Does this work well with pine needles and pine cones, or would it be better to get a leaf mulcher/shredder
Answer:	You can hear it if you are very close. But as hour meters go I would say it is quiet.
Question:	Could you run dried horse poop this to make a nice bedding fertilizer
Answer:	This timer requires a DC voltage source. My generator has a DC out to charge the 12V battery. I coupled the timer into that power source.

Product description

This Landworks Super Heavy Duty The Wood Chipper Shredder has a RATO 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine. Includes a top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX small branch/limbs, 3 in 1 Capable Multi-Function, 3 Years Warranty. Fuel this Wood Chipper with 87+ unleaded gasoline (NO ETHANOL recommended) with a max capacity of 0.7 gallons & fill the engine with Oil as recommended in the manual. The Universal Vacuum Kit can be used with GreatCirlceUSA, Landworks & SuperHandy Wood Chippers (with the correct adapter piece depending on the model). The Universal Tow Bar Kit can be used with various Wood Chipper brands like: GreatCircleUSA, Landworks, SuperHandy, Harbor Freight, Tazz & Earthquake Wood Chippers Shredders (WOOD CHIPPER NOT INCLUDED)

• MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching
• UNIQUE DESIGN; The Slanted Housing design reduces jams, unlike other chippers; Hookup your: ATV, lawn mower/small tractor, for easy transportation with a Tow Bar Kit and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (BOTH SOLD SEPARATELY)
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	What brand is the engine? Where is it made
Answer:	It is made in China. Thanks!
Question:	Hi! whats the difference between this landworks chipper and the superhandy chipper? at 1 point, the lw had an lct motor, but seems both now have rato
Answer:	Yes, it is a self feeding unit.
Question:	Where was this unit manufactured
Answer:	Unfortunately we do not sell the motor by itself. Yes you need a compliant motor in California
Question:	how good is the extened warranty and is it worth the money
Answer:	It should not be hard, if you need any parts you can contact us directly, since this is an entirely new sku parts will take about 1-2 months to arrive. As time progresses we will have more parts made for this unit.

Product description

More features:



- Safety cut-out switch: Can prevent overload and protect the motor.

Locking knob: When the knob is turned on, the motor will stop running, and then the upper casing can be removed to clean the wood chips in the machine.

Sturdy push paddle: Use the push paddle to safely feed materials into the hopper.



-Use the machine to shred the following materials:

Twigs and branches (Max. diameter 1.57in/40mm), bushes, hedges, plant material, leaves and plant roots (remove soil from roots before shredding).



-The shredder collection bag is made of high-quality materials, is waterproof and can be used for a long time.



Specification:

Powered by a Capable Electric Belt Driven Motor

Motor voltage: 120V~60Hz

Motor power: 1800W

No-load speed: 4500/min

Feeding port size: 5.71’’L * 1.57’’W

Max. branch cutting diameter: 1.57in/40mm

Product size: 17.32’’L * 14.76’’W * 35.04’’H

Packing size: 25.98’’L * 11.02’’W * 14.96’’H

Length of cable: 13.78in

Net weight: 23.3LBS

Gross weight: 24.9LBS

Collection bag capacity: 50L

Sound power lever: 106dB(A)

Protection class: IPX4



Package:

1× wood chipper

1× instruction

1× hardware



Note:

Do not allow children to operate this equipment.

Before starting the machine, look into the feeding chamber to make certain that it is empty.

Do not allow hands or any other part of the body or clothing inside the feeding chamber, discharge chute, or near any moving part.

Please read the instructions carefully before use.



If you have any problems with the products you receive, or if you need any help, please contact MELLCOM, we will help you ASAP.

• 【HIGH PERFORMANCE]】The electric chipper shredder is equipped with all powerful 15AMP 1800WATT 120VAC 60Hz electric belt driven motor, and a high-quality blade, which can quickly and easily cut branches with a diameter of up to 1.57 inches, increasing the efficiency of your garden.
• 【VERSATILE】This wood chipper can turn twigs, branches, hedge trimmings, bushes trimmings into high-quality mulch, and reduce their size to 1/16 of the original size. This mulcher chipper shredder is an excellent choice for optimizing garden space.
• 【PORTABLE AND LOW NOISE】This electric chipper has a compact design and is equipped with wheels for easy carrying. Unlike gasoline-powered chippers, this electric leaf mulcher is quieter. Therefore, it is very friendly to the users.
• 【SAFE TO OPERATE】The shredder is equipped with a safety cut-out switch (overload protection switch), a locking knob, a safety hopper and a sturdy push paddle to ensure safe operation.
• 【EASY TO ASSEMBLE】With all needed instruction and hardware. Our wood chipper can be easily assembled, helping you save much time and energy. Excellent customer service frees you from worrying about missing parts and damaged parts. Any question please contact us.

User questions & answers

Question:	Does this work well for pine needles
Answer:	Yes. We trimmed our Navajo Globe Willow trees with it. When there are lots of thin stuff it can get clogged, but easily cleared with larger branches. Wonderful tool!
Question:	Does it come with the collection bag? Do you sell the bag if not
Answer:	It will chip leaves and needles. I use it more for leaves and pine needles since I live in the Pinelands of New Jersey.
Question:	Can you please describe the shredder & how fine it can get get
Answer:	I mix pine needles with other materials (weeds, leaves, stalks). I haven't tried cones - they are kind of dense.
Question:	Will it do cardboard
Answer:	Don’t know, I don’t have a horse.