3 best trimmer head for gases
A trimmer head for gas-powered string trimmers is a crucial component in maintaining and using these outdoor power tools effectively. It is part of the cutting mechanism and holds the trimmer line, which is the material used to cut grass and weeds.
Here are some key points about trimmer heads for gas-powered string trimmers:
Functionality: The trimmer head spins at high speeds, utilizing centrifugal force to extend and cut the trimmer line. This allows for efficient and even cutting of grass and weeds.
Compatibility: It's important to ensure that the trimmer head is compatible with your specific make and model of gas-powered string trimmer. There are various types and sizes of trimmer heads available to accommodate different trimmer models.
String Trimmer Parts and Accessories: Trimmer heads are considered an essential accessory for gas-powered string trimmers. They are part of the overall cutting mechanism that includes the trimmer line, spool, and other related components.
Replacement Parts: Trimmer heads are subject to wear and tear over time, and they may need to be replaced.This is particularly true if they become damaged or worn out from regular use.
String Trimmer Line Compatibility: The trimmer head is designed to hold and dispense a specific type and size of trimmer line. It's important to use the recommended line size for your trimmer head to ensure optimal cutting performance.
Installation: Installing a new trimmer head typically involves removing the old one and securing the new head in place. It's important to follow the manufacturer's instructions for proper installation.
Maintenance: Regular maintenance of the trimmer head is essential for optimal performance. This may include cleaning debris, checking for any signs of damage, and ensuring that it spins freely.
Safety Considerations: When replacing or working on the trimmer head, it's important to ensure that the trimmer is turned off and that the spark plug is disconnected to prevent any accidental starts.
Availability: Trimmer heads and related accessories can typically be found at outdoor power equipment retailers, home improvement stores, and online marketplaces that specialize in outdoor power tools and accessories.
Remember, this information is provided based on general knowledge . For the most up-to-date and specific information about trimmer heads for gas-powered string trimmers, consider consulting product manuals, manufacturer websites, or trusted retailers.
Below you can find our editor's choice of the best trimmer head for gases on the marketProduct description
The 1-2-Trim is the Fastest line and blade trimmer head on the market. It allows for simple line as well as blade changes. Use as a brush cutter with blades then simply bend the pre-cut lines and use as a conventional trimmer. The fastest multipurpose trimmer and brush cutter.
- Change from lines to blades in 3 seconds
- Universal Installation Kit
- 6 High Quality Precut Trimmer Lines
- 3 High Quality Brush Cutter Blades
User questions & answers
Question: | Will this work on a Husqvarna 326LS |
Answer: | It should. It has a universal attachment kit. |
Question: | what are the parts with it |
Answer: | It’s trash |
Question: | how to install |
Answer: | Super easy. There are several extra pieces that comes with it that are meant fire several different types of trimmers. I mounted mine ibn a craftsman model. |
Question: | Will my 25cc engine on my Ryobi have enough power to use this trimmer head |
Answer: | It fits 99% of gas trimmers. Your model is a very popular, common model, there should be no problems using this replacement part. |
- ✄ POWERFUL CUTTER: 42.7cc full crank 2 cycle gas engine provides greater power and less vibration to make easy work of tough jobs
- ✄ BRUSH CUTTER & TRIMMER 2 IN 1: Gas powered trimmer and edger in one machine. Easily converts from a 3T blade to a dual line head in just seconds, helping you do multiple chores with on one product and save your precious time. It can not only prune turfgrass and weeds with 10''cutting path quickly, but also cut shrubs, brush, thick grass or vegetation with 18''cutting blade
- ✄ EASY TO OPREATE: Adjustable lightweight U-handle and shoulder strap decreases operator fatigue during use with greater control,provide maximum comfort and control,make your job easier
- ✄ FLEXIBLE DESIGN: Straight shaft structure makes it easier to trim under bushes and get to tough-to-reach places. And durable metal blade allows you to cut through dense vegetation and grass in less time.Giving you straighter lines and cleaner cuts
- ✄ BUY WITH CONFIDENCE: Please don't hesitate to contact us by customer service email if you have any problems
User questions & answers
Question: | Does it come with a charger for the batteries |
Answer: | No.it is gas powered |
Question: | can it cut brush |
Answer: | It cuts any and everything with ease |
Question: | How long is the warranty |
Answer: | 1 year |
Question: | Does it come with the shoulder strap |
Answer: | Yes it comes with the shoulder strap and both string head and blade. |
Question: | Can you lock the rotation of the monitor so it stays horizontally flat? Thanks |
Answer: | Yes you can, you can find instructions on how to do that in the product installation manual. |
Question: | If I have a lip on the bottom of my desk, can I still use the clamp base |
Answer: | the clamps are pretty wide and deep, so probably the clamp could fit ok if the lip wasnt too extreme |
Question: | What is the maximum height(from desk to center of monitor) this can extend upto? (Looks like the pole is 19'' tall),Thanks |
Answer: | Yes the pole is 19" and the arm can move the center of the display 20", here is the dimensional drawings to help clarify: https://media.ergotron.com/reserved/resources/dim-lxstsdesk-orig.pdf?_ga=2.256844683.1888597782.1615832573-920594143.1554324272 |
Question: | If I use it while I stand up (say 23" to 34" monitor), is it high enough |
Answer: | Depends on your height, your desk's height and your monitor size. It is for me. I am 5'11", my desk is 29.5" tall, and I have a 34" Ultrawide (21:9). If I slide the arm to the highest point on the pole, I can get the center of the monitor up to eye level. However, if you don't have a deep desk, you will not be able to get the monitor down to a comfortable seated height without having the monitor a bit close to your face. The top arm will push against the pole restricting z-axis movement. My desk is 2 ft deep and the monitor is a little too close so I had to move the monitor arm down the pole 2" in from the top. Otherwise, the arm is stable with my 34" Ultrawide (locked rotation). |
Product features
Specification:
Material: Metal, Plastic.
Color: Black, Orange and Silver.
Size: 185x26x26/72.8x10.2x10.2inch.
Engine Model: ie40F-5.
Engine Type: Air-cooled,two-stroke,single cylinder gasoline.
Diameter of cylinder: 43MM.
Standard Power: 1.25km/7000r/min.
Displacement: 42.7cc.
Carburetor: Pump-film type.
Fuel Mixed Ratio: Gasoline:Engine oil 25:1.
Ldling Speed: 2800-3200r/min.
Fuel tank capacity: 1200ml.
Pipe Diameter: 26MM.
Carring Type: Side-attached.
2 IN 1 Grass String Trimmers
- Material: Metal, Plastic.
- Color: Black, Orange and Silver.
- Size: 185x26x26/72.8x10.2x10.2inch.
- Engine Model: ie40F-5.
- Engine Type: Air-cooled,two-stroke,single cylinder gasoline.
- Diameter of cylinder: 43MM.
- Standard Power: 1.25km/7000r/min.
- Displacement: 42.7cc
BRUSH CUTTER & TRIMMER 2 IN 1:
- Equipped with 2 trimming heads for different use:
- A dual line for lawn grass/small grass,
- A 3T blade for dence grass/heavy bush.
- Easily converts from a 3T blade to a dual line head in just seconds, helping you do multiple chores with on one product and save your precious time.
- It can not only prune turfgrass and weeds with 10''cutting path quickly, but also cut shrubs, brush, thick grass or vegetation with 18''cutting blade.
ERGONOMIC DESIGN
String trimmer/Brush Cutter designed to produce minimal vibrations for comfort!
- Offset U-handle with stop switch and throttle lock-out for maneuverability.
- Adjustable lightweight U-handle decreases operator fatigue during use with greater control, provide maximum comfort and control, make your job easier.
- Keep Balance and clear view---Balanced straight shaft makes cutting comfortable and provides a clear view of the area being trimmed.
POWERFUL CUTTER
2-cycle engine motor and Visible fuel tank
- 42.7cc full crank 2 cycle gas engine provides greater power and less vibration to make easy work of tough jobs!!!
- A translucent fuel tank allows you to visually monitor your fuel level as you work.
- External Manual Oil Pump, humanized design, easy to operate, supply sufficient fuel faster by squeezing, pinching, quick start.
Super Shock Absorption Design & Wide Safety Guard
- The string trimmer with the super shock absorption design, adds the comfort of use, and reduces the health injury and fatigue caused by vibration.
- The string trimmer designed with an easy-to-remove baffle, can prevent debris from splashing, ensure safety and increase operating efficiency.
- If you want to cut the string,just hit the grass head on the ground and the rope will be cut by the catcher when it works.
FLEXIBLE DESIGN
- Shoulder harness to reduce user fatigue, make your body straightly, reduce waist injury.
- Switch: Ignition switch is mounted on the top of the throttle trigger housing .
- Move switch for Forward to Run ,Back to Stop.
- Ignition switch is designed near throttle switch ,it is more convenient to operate.
Product description
MaxPower's 3317233 PivotTrim universal trimmer head accepts .080" and .095" diameter line and fits most trimmer models. This trimmer head cuts with 6 pivoting lines to prevent breakage and is quick and easy to use. Premium pre-cut trimmer line is included. All MaxPower products are manufactured with peak performance and reliability in mind.
- Accepts .080" and .095" diameter line
- Fits most trimmer models
- Cuts with 6 pivoting lines to prevent breakage
- Quick and easy to use
- Premium pre-cut trimmer line is included
- material type: metal
User questions & answers
Question: | Will this fit the stihl fs 36 model |
Answer: | I've only used it once but it did not leave marks on my concrete when I moved the hose around. I hope this helps. |
Question: | I know it's the left-field question but can you attach the plastic blades on this head |
Answer: | A little stiffer than low cost budget hoses but flexible enough not to be a hindrance when using. Good quality product. |
Question: | Will this fit a dewalt dcst970x1 flexvolt 60v max cordless string trimmer |
Answer: | No |
Question: | Does it fit Dewalt 20 volt max trimmer |
Answer: | With two wrenches. |
Product features
For All Your Outdoor Power Equipment Needs
Shop MaxPower for ALL of your small engine replacement parts. Blades, filters, trimmer line, belts, chainsaw parts, engine parts, wheels, tubes and MORE!!
USA Manufacturer
We proudly manufacture the following items at our state of the art facilities in Glennville, GA and Phoenix, AZ:
- Mower Blades
- Edger Blades
- Trimmer Line
- Foam and cartridge style air filters
Heat Treat Process for Mower Blades
Foam Filter Manufacturing
Cartridge Filter Line
Trimmer Line Extrusion
Latest Reviews
View all
Blinds Stores
- Updated: 05.02.2023
- Read reviews

Sprouting Kits
- Updated: 06.04.2023
- Read reviews

Y G Pageant Dresses
- Updated: 09.05.2023
- Read reviews

Hp Premium Inkjet Printers
- Updated: 27.04.2023
- Read reviews

Wireless Inkjet Printers
- Updated: 05.06.2023
- Read reviews