9 best homelite chain saws

Product description

These Oregon S56T 16-Inch AdvanceCut chainsaw chains cut smoothly thanks to their top performing Chamfer Chisel cutters. These chains also feature notched bumper drive link for low kickback performance, good chip flow, and smooth cutting action. The twin corners of the cutters on S56 chains deliver superior performance on the many popular saws which use low profile 3/8 in. pitch chain. S56 chain also features four-way symmetrical tie straps which simplify the joining of chain loops. These chains fit chainsaw models from several brands including Craftsman/Sears, Echo (only when used with Oregon branded bars), Homelite, Makita and McCulloch. See back of package image for a list of saw models that this chain fits.

• Fits several chainsaw models including but not limited to: 【Husqvarna】334T, 335T, T435, T540XP【Echo】CS-310, CS-352, CS-355T, CS-370【Poulan】260, 2150, 3516, WildThing【Ryobi】RY3716, RY43154 【Greenworks】20152, 2000800, 2002802
• Also fits:【Homelite】UT43122, UT43123 【Craftsman】358.34116, 358.35161, 358.35170, 358.35514, 358.38070, 358.38160, 38.38170, CMECS600; See image of back of package for a list of saw models this chain fits
• Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
• Automatic oiling for longer lasting chain – LubriTec is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
• Your chain stays sharper longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments

User questions & answers

Question:	Does this chain fit the Echo 370? I usually use Power Care Y57 replacement chains that I p/u at Home Depot. Any help is much appreciated
Answer:	The previous answer is correct. Turn the ring at the base of the handle counterclockwise. The ring was very tight when I removed it for the first time.
Question:	Is this the same as a Remington 16SC chain
Answer:	I would, but not someone like Barney Fife.
Question:	Will this chain fit a Craftsman Chain Saw model
Answer:	Prismacolor should sharpen with no problems. Polychromos pencils might have too great a diameter to even fit into the Derwent. I have never tried the Lyra oil based pencils in the sharpener. You might experience caking-up issues with the cutting blades. But it can always be cleaned if you do.
Question:	What is the differance between S56t and S
Answer:	Yes, it does draw the pencil in. You clamp the pencil in and as you crank it, the pencil draws in to the point of clamping. It's very controlled.

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for "DIY" homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

LubriTec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Product description

An Ideal choice for occasional users like property owners and commercial cutters. The low-vibration, Micro Chisel cutters have small radius working corners for excellent performance and easy maintenance. Oregon 20BPX chain, low kickback design. Please contact Oregon customer care to ensure the best fit for your chainsaw. Fits many chainsaw models, including the following: Dolmar PS-460*, PS-510*, PS-5100S*, PS-5105*, PS-6100. Echo CS-400EVL, CS-440, CS-440EVL, CS-450, CS-450P, CS-500P, CS-510, CS-520, CS-530, CS-550*, CS-4400, CS-4500, CS-4600, CS-5000. Husqvarna 36*, 40, 41*, 44*, 45, 50*, 51*, 55 Rancher*, 136*, 137*, 141*, 142*, 240*, 254XP*, 257*, 261*, 262XP*, 340, 345, 350, 353 E-TECH, 357XP*, 359*, 359 E-TECH*, 362XP*, 435, 435E, 440E, 445, 450, 450E, 455 Rancher*, 460 Rancher*, 550XP, 555*, 560 XP*. Makita DCS430, DCS431, DCS460*, DCS510*, DCS540*, DCS520i*, DCS5200i*. McCulloch MAC 4600, MAC 4700, MS 1846, MS1849AV, PM 40, PM 46, PM 4700, PM 5000. Poulan 295, 315, 335, 336, 2700, 2750, 2775, 2800, 2900, 3300, 4620, 4620AV, 4620AVX. (*Ensure your model has a .325” sprocket)

From the Manufacturer

Oregon H72 18 inch saw chain that fits on an 18 inch bar (.325 in, pitch Pro-Guard) is a low vibration, low kickback chains which meet both the ANSI (U.S.) and CSA (Canadian) low kick requirements. This chain is excellent choice for anyone who cuts clean wood and uses a saw that takes .325 in. pitch cutting attachments. To find the correct replacement parts and accessories for your chainsaw go to www.oregonchain.com.

• 18" chain fits many popular chainsaw brands, including Craftsman, Echo, Homelite, McCulloch & Poulan
• UL classified to conform to ANSI 175.1 standards for low-kickback saw chain
• Made in USA at ISO certified facility
• Advanced technology ensures tough, sharp cutters
• 18" length. This chain will not fit every saw made by the brands listed. To be sure, contact Oregon customer care for the correct chain for your saw

User questions & answers

Question:	will this chain fit a low profile bar
Answer:	Not sure what you mean by low bar but it will fit an 18" bar
Question:	What's the gauge on this chain
Answer:	0.050 This site has a few more specifications. http://www.homedepot.com/p/Oregon-H72-18-in-Chainsaw-Chain-H72/202532104
Question:	Will it fit on my 18" Remington RM5118R
Answer:	start with your chain part # first then cross referance that way, I show 753-06265 on your 18" remington, this way you get more refrences to fit and more accurate MFG listings. lots of variables here sproket gear size is over looked often
Question:	Will it fit a husqvarna
Answer:	This chain will fit on an 18" bar that requires 0.325" chain pitch, 0.050" chain gauge and has 72 drive links.

Product features

Oregon ControlCut Chainsaw Chain

If you own or maintain a property, you will inevitably manage a lot of smaller jobs. They add up fast. Oregon's ControlCut saw chain is ideal for all light-duty work, because it gives you a smooth cut every single time and it's easy to maintain.

ControlCut has the longevity for bigger jobs, too. ControlCut's semi-chisel and Micro Chisel cutting styles are ideal for property owners who need to cut the occasional tree limb, as well as experienced landscapers and orchardists who cut trees for a living.

ControlCut is low maintenance, and it stays sharper so you get jobs done quickly and easily.

Lubritec Reservoirs

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Product description

This 14-Inch guide bar and chain combination features a 3/8" low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain. The Chamfer Chisel cutters offer outstanding performance and are durable, easy to maintain and forgiving. This combo fits many chainsaw models including, but not limited to, the following: Echo CS310, CS-370, CS-355T, and CS-400; Craftsman 358.34190; Husqvarna 136, 141 and 142. Others include Craftsman - multiple models. Cub Cadet CS3916. Dayton 2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573, 6Z284, 6Z823. Dolmar ES-171, ES-173, PS-3300TH, PS-34, PS-340, PS-341, PS-3410TH, PS-3410TH TLC, PS-3410THC, PS-350, PS-400, PS-401, PS-420, PS-45. Earthquake CS3814. Earthwise CS30014, LCS35814, YT4729. Echo CS-280, CS-290, CS-300, CS-3000, CS-301, CS-302, CS-303T, CS-305, CS-306, CS-315, CS-330, CS-330MX4, CS-330T, CS-340, CS-3400, CS-341, CS-345, CS-3450, CS-346, CS-351, CS-352, CS-355T, CS-360T, CS-361P, CS-370F, CS-370T, CS-400, CS-400F, ECS-2000, ECS-3000. Efco 132S, MT 3600, MT 3700, MT 3750, MT 4000, MT 4100 SP. Makita 5012B, 5014NB, 5016NB, DCS 3000, DCS 330S, DCS 330TH, DCS 34, DCS 340, DCS 341, DCS 390S, DCS 400, DCS 401, DCS3416, EA3200S, EA3200SRBB, EA3201S, EA3201S35B, EA3500S, EA3501S, EA3501S40B, EA4300F40B, UC 3030A, UC 3530A, UC 4000, UC 4030A, UC3050A, UC3051A, UC3550A, UC3551A, UC4050A, UC4051A, XCU04. Poulan 1220, 1420, 1425, 1625, 1630, 180, 1800, 190, 1900, 1950, 1975, 200, 2000, 2025, 205, 2050, 2055, 2075, 210, 2150, 2155, 2160, 2175, 220, 2200, 221, 222, 225, 2250, 2300, 235, 2350, 236, 2375, 240, 2400, 2450, 250, 2500, 255, 2550, 2555, 260, 2600, 262, 3314 Woodshark, 3416, 3516, 3516AVX, 3816, 400E, 4018, 4218, 4218A, 4218AVX, 967607201, E14E, E16E, ELECTRIC PRO 400E, ES400, Micro 25 XX Series, Micro 25 XXV Series, P3314, P3816, PATRIOT 1900, PL3314, PL914, PPR4218A, PR4218, S23, S25, Super Micro 25 XX Series, Super Micro 25 XXV Series, WILDTHING, Woodshark.

From the Manufacturer

This 14 inch bar and chain combination from Oregon features smooth cutting, low kickback, and longer bar life. To find the correct replacement parts and accessories for your chainsaw go to www.oregonchain.com

• The chamfer chisel cutters offer outstanding performance and are durable, easy to maintain and forgiving
• Lubritec keeps your chain and guide Bar Oiled for less friction and longer life
• Pitch: 3/8" low profile, gauge: .050", chain drive link count: 52

User questions & answers

Question:	Will this work on echo cs-330evl
Answer:	Check the bar size on the echo and the links 14" echo cvs-330 eval takes 52 links 16" takes a 57 link chan Pitch for echo is 3/8 inch https://c.searspartsdirect.com/mmh/lis_pdf/OWNM/L0706086.pdf Page # 4 has the info Good luck
Question:	Will this fit echo cs
Answer:	It fit mine
Question:	Will this fit a Echo CS
Answer:	I have an older echo 315 and it was a perfect fit. I think it fits all three series echo saws. In my opinion Oregon chains and bars are the best.
Question:	Looks like the 91VG in title is incorrect. Package shows that chain is Oregon #52. Please verify
Answer:	91Vg is oregon number to identify chain and low profile 52 is # of drive links

Product features

Oregon AdvanceCut Chain & Single Rivet Guide Bar Combo

The Oregon AdvanceCut Chain and Single Rivet Guide Bar Combo combines our best-selling saw chain and most maneuverable guide bar to optimize ease of use for homeowners and occasional users. Designed with premium light-weight technology, this combo makes the perfect pair for quick and simple lawn care jobs.

AdvanceCut Saw Chain

Homeowners need a chainsaw they can count on for occasional yard work and downed-trees. Oregon AdvanceCut Chainsaw Chain was designed by our engineers to ensure its durability and reliability for easy maintenance and performance. This chain features our trademark LubriTec oiling system, low vibration, hardened rivets, and chrome-plated cutters that live up to the Oregon brand quality that many trust and depend on.

Single Rivet Guide Bar

Our Single Rivet guide bar is ideal for homeowners who only have an occasional need to use a chainsaw. The single-rivet, smaller-radius nose helps reduce kickback while its light-weight body makes it easy to maneuver - perfect for small electric and gas chainsaws.

Product description

Oregon 16-Inch Semi Chisel Chain Saw Chain Fits Homelite S59

From the Manufacturer

The following list of saw models is not comprehensive. To ensure you are ordering the correct part, please contact Oregon Customer Care. Fits the following models: Homelite - 180 Series|Homelite - 190|Homelite - 200|Homelite - 192|Homelite - 245 (before XE339)|Homelite - Bandit|Homelite - LX30|Homelite - ELECTRIC 200|Homelite - UT10520-A Super 2|Homelite - Super 2|Homelite - XEL-14|Homelite - XELElectric|Homelite - 240|Homelite - XL 2|Homelite - XL-10|Homelite - XL-14|Homelite - Super 2CC|Homelite - XL2CC|Homelite - UT10520 Super 2|Homelite - XL-16|Homelite - LITTLE RED|Homelite - Classic 192|Homelite - VI Super 2|Homelite - XL.

• Pitch: 3/8" Low Profile, gauge: .050", drive link count: 59
• LubriTec keeps your chain and guide bar oiled for less friction and longer life
• For saw sizes up to 42 cc
• This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3

User questions & answers

Question:	Will this chain fot a Homelite Big Red
Answer:	Thank you for your interest in our Derwent Pencil Sharpener. Turn handle anti clock wise so cover comes off and you can then see inside the mechanism. Even the smallest piece of lead can prevent the sharpener from working so you might need to use a pin to free any trapped lead.
Question:	Does s59 come in a double pack
Answer:	Unfortunately, I do not. However, have you tried visiting the company's website or their social media platforms i.e., Facebook, Twitter, Instagram? Good luck!
Question:	Work for stihl saws? 16” 026 model
Answer:	Mine leaves little teeth marks from the clamp.
Question:	will this chain fit a craftsman 16 in chain saw
Answer:	Yes, mine came with a clamp which is very simple to use.

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for "DIY" homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

LubriTec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Product description

The Oregon low kickback replacement chainsaw loop chain features chamfer chisel cutters. The cutters have twin cutting corners to offer outstanding performance, durability & easy maintenance. An ideal choice for homeowners & occasional users who want a low-vibration, low-kickback saw chain. Has a 3/8in. Low profile chain pitch & 0. 050in. Chain Gauge. Fits 14in. bar. bar length in. 14, chain Gauge in. 0. 050, chain pitch in. 3/8 low profile, chain type low-kickback chamfer chisel, drive Links Qty. 52, file size in. 5/32, length'. 3 3/16, product weight Lbs. 0. 49 3/8in. Low profile chain pitch 0. 050in. Chain Gauge 52 Drive Links to fit an 14in. bar size low kickback chamfer chisel cutters with twin cutting corners offer outstanding performance, durability & easy maintenance bumper drive links are paired with a depth Gauge design to help reduce kickback LubriTec keeps your chain & guide bar Oiled for less friction & longer life vibe-ban reduces vibration at the handles by 25 or more meets the kickback performance requirements of ANSI B175. 1-2012 when tested according to the provisions of ANSI B175. 1-2012 low-kickback saw chain meets the kickback performance requirements of CSA standard Z62. 3. Weather resistant.

From the Manufacturer

Oregon S52 14 inch saw chain features top performing Chamfer Chisel cutters and a notched bumperdrive link for low kickback performance, good chip flow, and a smooth cutting action. The twin corners of the cutters on S52 chain deliver superior performance on the many popular saws which use low profile 3/8 in. pitch chain. S52 chain also features four way symmetrical tie straps which simplifies the joining of chain loops. To find the correct replacement parts and accessories for your chainsaw go to www.oregonchain.com

• Fits several chainsaw models from Echo, Craftsman, Poulan and Homelite that have a 14” bar. See back of packaging and product description for list of models.
• Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
• Automatic oiling for longer lasting chain – Oregon’s LubriTec oiling system is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
• Your chain stays sharper, longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments
• Chain is for 14-Inch bars. Pitch: 3/8" Low Profile, Gauge: .050", Drive Link Count: 52.
• Precision cutting chain, heat-treated, and hard-chromed cutter chain
• Unique cutter design cuts smooth and fast with minimum kickback

User questions & answers

Question:	What is the meaning of "S52" and "S49" on the chain replacement
Answer:	Not certain but I believe it has to do with the spacing of the teeth on the wheel at the end of the bar. I have two 14-inch bars for my chainsaw, one that fits s49 and the other s52. Always better to have a choice you know.
Question:	Will it replace craftmans part # 71-3617 for an old Craftman 14" electric chain saw
Answer:	Yes.......it will fit all 14-inch saws........the quality is very good. Depending on where you live and how much you use your saw, you might consider buying two replacements. I typically use mine for many different jobs around the yard. If you have the availability of having the original chain sharpened, the cost is usually about $5 or $6. I have three chains so if I am in the middle of a large diameter tree, I can usually finish the job faster by having a quick replacement. I have cut trunks 24 inches in diameter....a sharp chain is essential!
Question:	I have a ut 43102/14 Homelite electric chain saw. replacement chain says 52 3/8 L.P. Believe this is the chain i want! Is It
Answer:	Yes, that will fit. I have a UT 43104, 14" Homelite electric chain saw. And it says on the chain bar 52, 3/8"(.375), 14"(350mm).
Question:	Will it fit Poulan PLN1514 electric chain saw
Answer:	No it will not. That's the same chain saw I own. What you need is the Oregon S49. The number on the package corresponds to the number of chain links and the PLN1514 has 49. I hope this has been helpful to you. You can follow this link or copy and paste. http://www.amazon.com/Oregon-14-Inch-McCulloch-Remington-S49/dp/B00004RA87/ref=sr_1_1?s=lawn-garden&ie=UTF8&qid=1412270180&sr=1-1&keywords=oregon+s49+chain

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for "DIY" homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

LubriTec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Product description

Compatible with the following models:

Notice: Including but not limited to these models. Please check your guide bar length and count the number of drive links on your old chain.

Compatible with REMINGTON ELECTRIC MODEL 075703l, 075705j, 075762j, 075890l, 076728k, 098031j, 099309j, 099178h, 100089-05, 100089-06, 100089-07, 100089-08, 106821POLE SAW, 107624-01, 107625-01, 107709-01, 107714-02, EL-6, EL-7 LNT-2; ELECTRIC MODELS: EL-1, EL-1FS, EL-2FS

Compatible with : 009, 009 L, 010, 011, 012, 015, 017, 018, 019, 020, 021, 023, E 10, E 14, E 140, MS 170, MS 171, MS 180 C, MS 180 C-B, MS 180 C-BE, MS 180 G, MS 181, MS 181 C, MS 181 C-BE, MS 191T, MS 192 C, MS 192 C-E, MS 192 T, MS 193, MS 193 C-E, MS 193T, MS 200T, MS 201 C-EM, MS 201 T C-M, MS 201C, MS 201T, MS 210, MS 210 C, MS 211, MS 211 C-BE, MSE 140, and MSE 140 C.

Compatible with McCULLOCH: M1, M2, M2B, M4, M4B, M6, M6B, 10E, 12E, 14E, 16E, MS1425, MS1630, MS1640, MS1630NT, MS1640N, PM380, PM394, PM400, PM494, 839, 842, 930, 935, EM300S

Compatible with ALPINA: 330, 382, 432, 438, Euro-35, Euro-40, Euro-45, P34, PR350, Elettra160, Elettra 170, 270, 280, Energy1.6, Sinergy35, Sinergy40, P360, P361, P370, P390, P391Q

Compatible with EUGEOT/FOE: TLS1630, TLS1635, TLS1640, TRC1630, TRC1635, TRC1640

Compatible with STIGA: 930, 935, 1400, SE1.6, SE1.8, SP340

Compatible with CASTEL: CS35P, CS16E, CS17E, CS36, CS39

Compatible with HOMELITE: EL12, EL14, EL16

Compatible with PARTNER: 1535EL, 1540EL

Compatible with METABO: 5338

• Specification: 14-Inch chainsaw bar, Pitch: 3/8" low profile, Gauge: .050", chain drive link count: 50 (The same saw can be equipped with different bar lengths. Please verify your parameters to ensure this chain works with your machine.)
• Compatible with several chainsaw models including MS170,MS171,MS180C,MS181,but not limited
• Compatible with McCulloch, Remington, Homelite, Alpina, Aklo, Castel, Castor, Garden, Leroy Somer, Metabo, Olympyk, Partner, Peugeot/Foe, Stiga and others.
• Semi-chisel Design:Semi-chisel cutter is more tolerant of dirt and dust and stays sharp longer than the other cutters.It cuts smoothly with low-kickback
• Saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3

Product description

This product is produced from high strength German steel to provide the user the best possible experience!

• Replaces Oregon S52 / 9152, Worx 14" Chainsaw Chain, Makita 196207-5 14", Poulan 952051209 14-Inch Chain Saw Chain 3/8, Husqvarna 531300372 14-Inch H36-52 (91VG)
• fits Greenworks 14-Inch 10.5-Amp, Worx WG305.1
• fits Toro PowerPlex 51880, Makita UC3551A 14", Sun Joe SWJ699E / SWJ599E
• fits Tanaka TCS33EDTP, Earthwise CS31014 14
• also fits other models if the Nr of drive links Pitch and Gauge are matiching! Safe money for the party, you will get a pack of 3 chains!

User questions & answers

Question:	Will this fit a stihl ms190c
Answer:	Yes
Question:	Are these full or semi Chisel
Answer:	semi cuts good
Question:	is it Compatible with GreenWorks chainsaw model
Answer:	This product will fot any 14" bar chainsaw. So yes this will work on greenworks 14" chainsaw.
Question:	Is there a recommended sharpening gauge
Answer:	5/32

Product features

All-purpose saw chains

These chains are produced from high strength German steel to provide the user the best possible experience! These low-profile saw chains are for the use on light to mid weight chain saws.

Data:

Gauge: .050”

Pitch: 3/8” low profile

Number of drive links: 52

For guide bar length: 14"

Matches these chainsaws

Fits many chainsaw models, including the following: Craftsman/Sears 358.34104, 358.34195, 358.35046, 358.35083, 358.35161, 358.35170, 358.35514. Echo CS-300, CS-310, CS-330T, CS-340, CS-341, CS-345, CS-346, CS-352, CS355T, CS-360T, CS-370, CS-3400, CS-3450. Homelite UT10514, UT10540, UT10544, UT10549, UT10640, UT10901, UT10901A, UT43100, UT43103. Husqvarna 136*, 137*, 142*, 235E*, 240*, 240E*, 334T, 335T, T435, T540 (*if you have a 3/8” low profile sprocket). Makita 5012B, 5014NB, DCS34, EA3201S35B, UC3530A, UC4030A. McCulloch CS340, CS380, EB358a, MCC1435A, MCC1635A, MS354a, MS4016. Poulan 190, 220, 260, 1420, 1425, 1625, 1630, 1800, 1950, 2000, 2025, 2050, 2055, 2150, 2300, 2375, 2450, 2550, 3314 Woodshark, 3416, 3516, 3516AVX, 3816, Micro 25 XXV Series. Worx WG305, WG305.1.

Always check your guide bar length and count the number of drive links on your old chain.

• ◇PARAMETERS: 16 Inch, .050" Gauge, 3/8" LP Pitch, 56 Drive Links (The same saw can be equipped with different bar lengths. Please verify your parameters to ensure this chain works with your machine. Besides the models mentioned here, there are others fit for this chain. If you have any problems or concerns about the compatible machines, please feel free to contact us.)
• ◇Replacement for Craftsman/Sears 358.34116, 358.35161, 358.35170, 358.35514, 358.38070, 358.38160, 38.38170【Echo】CS-310, CS-330T, CS-346, CS-352, CS-355T, CS-360T, CS-370, CS-400, CS-3400, CS-3450 【Homelite】UT10516, UT10532, UT10560, UT10564, UT10568, UT10569, UT10660, UT10926, UT10947, UT43122
• ◇Replacement for McCulloch CS340, CS380, EB358a, MCC1635A, MS354a, MS4016【Poulan】220, 221, 222, 260, 400E, 1420, 1425, 1625, 1630, 1800, 1950, 2000, 2025, 2050, 2055, 2075, 2150, 2175, 2250, 2300, 2375, 2450, 2550, 3416, 3516, 3516AVX, 3816, WildThing
• ◇SAFETY: UL approved, meets the ANSI Standards. Semi-chisel with low kickback.
• ◇RELIABLE QUALITY: 1.Material: Germany imported steel, high toughness, anti-fracture. 2. Connection: Heat treated and quenched rivets make stronger connection between chain links. 3. Surface: All the chain cutters are plated with premium industrial hard chrome, of better wear resistance.

User questions & answers

Question:	Will this fit a Husqvarna 120 Mark ii 16 inch saw
Answer:	I gave to my granddaughter (age 6) . She is artistically inclined , made her holders to keep them in, and it has worked out well.
Question:	Will this fit mcculloch eager beaver eb
Answer:	These are more of a cross between oil pastel and colored pencil, but do not smear as badly as oil pastel. They are not dusty like chalk. Colors are vibrant! There is no shiny gold or silver but that effect can be accomplished by technique. I love my full set of Derwent Pastel Pencils.
Question:	Will this fit a Remington
Answer:	You can use watercolor paper. That will not tear. You can draw on the paper then use very little water to wet where you draw. Or wet paper the apply pencil. You might watch some technique on YouTube.com I subscribe to Artistnetworktv.com for $20.00 per month and get to watch over 500 videos of artist giving demos, workshops. It is really a wonderful place to learn. I am new at art myself. Doing pastels is my interest for now. Have done some watercolors. Retired old fart on this side of the great digital divide. Just trying to keep my mind occupied. John
Question:	Will this fit a 40 volt greenworks 16 inch chainsaw
Answer:	As others have mentioned, do not blow the dust off the paper as this can cause serious health risks. Instead, tap the excess dust into the trash or onto a scrap piece of paper. You might also consider picking up a small vacuum, like one that is used to clean out a computer keyboard. This can vacuum up excess dust and not allow it to slide down your paper. Once you have finished drawing, be sure to wipe down your work area with a wet paper towel or sponge to prevent that dust from becoming airborne too.

Product features

Replacement for

[McCulloch]: CS340, CS380, EB358a, MCC1635A, MS354a, MS4016

[Poulan]: 220, 221, 222, 260, 400E, 1420, 1425, 1625, 1630, 1800, 1950, 2000, 2025, 2050, 2055, 2075, 2150, 2175, 2250, 2300, 2375, 2450, 2550, 3416, 3516, 3516AVX, 3816

Germany Imported Steel

Germany imported steel, of high toughness, anti-fracture.

Semi-chisel Design

1.Semi-chisel cutter is more tolerant of dirt and dust and stays sharp longer than the other cutters.

2.Cuts smoothly with low kickback.

Premium Industrial Hard Chrome

All the chain cutters are plated with premium industrial hard chrome, of better wear resistance.

Strong Connection

Heat treated and quenched rivets make stronger connection between chain links.

Product description

The Oregon S52 AdvanceCut Saw Chain is for homeowners and occasional users who want a low-vibration and low-kickback saw chain. The Chamfer Chisel cutters' twin cutting corners offer outstanding performance. These cutters are durable, easy to maintain and forgiving. This chain fits many saws including, but not limited to: Husqvarna 120 Mark II, 120i, 135, 136, 137, 141, 142, 23, 235E, 240, 240E, 243, 316E, 33, 334T, 335, 336, 338XPT, 339XP, 34, 35, 36, 37, 38, 41, EL 16, EL 316, T435, and T540XP. Fits Echo CS-2511T, CS-280, CS-290, CS-300, CS-3000, CS-301, CS-302, CS-303T, CS-305, CS-306, CS-310, CS-315, CS-330, CS-330MX4, CS-330T, CS-340, CS-3400, CS-341, CS-345, CS-3450, CS-346, CS-351, CS-352, CS-355T, CS-360T, CS-361P, CS-370, CS-370F, CS-370T, CS-400F, ECS-2000, ECS-3000, PPF-2620, PPF-280, PPT-2620, PPT-2620H, PPT-265, PPT-265S, PPT-266, PPT-266H, PPT-266S, PPT-280. Fits Ryobi RY3714, RY40503, RY40530, RY43006. Fits Worx WG305, WG305.1. Fits Poulan 1220, 1420, 1425, 1625, 1630, 180, 1800, 190, 1900, 1950, 1975, 200, 2000, 2025, 205, 2050, 2055, 2075, 210, 2150, 2155, 2160, 2175, 220, 2200, 221, 222, 225, 2250, 2300, 235, 2350, 236, 2375, 240, 2400, 2450, 250, 2500, 255, 2550, 2555, 260, 2600, 262, 3314 Woodshark, 3416, 3516, 3516AVX, 3816 and more. Fits Homelite 20, 20AV, 23, 23AV, 3300, 3314, 3316, 3318, 3350, 3550, 3800, 3850, PS33, Ranger, UT10514, UT10516, UT10517, UT10530, UT10530A, UT10532, UT10540, UT10542, UT10544, UT10546, UT10548, UT10549, UT10560, UT10562, UT10564, UT10566, UT10568, UT10569, UT10580, UT10582, UT10584, UT10586, UT10588, UT10589, UT10640, UT10660, UT10680, UT10901, UT10901A, UT10918, UT10926, UT10947A, UT10947D, UT10947E, UT10974A, UT43100 and more. Fits Sun Joe SWJ699E and SWJ701E.

• Fits several chainsaw models from Echo, Craftsman, Poulan and Homelite that have a 14” bar. See back of packaging and product description for list of models.
• Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
• Automatic oiling for longer lasting chain – Oregon’s LubriTec oiling system is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
• Your chain stays sharper, longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments
• Chain is for 14-Inch bars. Pitch: 3/8" Low Profile, Gauge: .050", Drive Link Count: 52.
• 14 inches
• Engineered for safety, performance, and quality

User questions & answers

Question:	When are you going to fix this listing so it can be shipped into California
Answer:	DickBlick.com is as good resource... they list all the colors in each of the sets for all the pencils they sell.
Question:	What are you using for sharpening
Answer:	Good morning. It looks like Amazon is using an older list; the colours were changed prior to launch. Thank you for bringing this to our attention; I'll ask Amazon to update the listing. Colours are subject to change, but they are currently: Sun Yellow, Champagne, Yellow Ochre, Sandstone, Flesh Pink, Salmon, Sienna, Scarlet, Ruby Earth, Oyster, Heather, Nightshade, Violet, Blue Violet, Mid Ultramarine, Arctic, Dark Turquoise, Mallard Green, Racing Green, Spruce Green, Olive Earth, Forest, Seaweed, Van Dyke Brown, Venetian Red, Sepia (Red), Natural Brown, Chocolate, Brown Ochre, Wheat, Warm Grey, Cloud Grey, Mist, Midnight Black, Black, and white.
Question:	will this fit a greenwork saw
Answer:	It would be wonderful for this! There are a lot of nice skin tone colors...
Question:	Will this fit the echo
Answer:	They don't wear down as quickly as Coloursoft but are not as scratchy as Studio and Artist. The color lays down smoothly but it to the transparent side like other "oil" pencils (especially Irojiten), I was able to get some light over dark blends and more layers than with thicker waxier pencils. The 12 pack is reasonable enough to try and there's no reason you shouldn't like them. I do portraits not coloring books and it's been so far so good on artist quality papers. They behaved well on smooth toned sketchbook paper.

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for "DIY" homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

LubriTec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.