9 best router lifts

Product description

The JessEm Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.

Double-Sealed Ball Bearing Construction

Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.

Bearing the Tension of the Lift

The shafts on the Rout-R-Lift II, like all the Router Lifts, are pressed into a shaft mount with hydraulic pressure. The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.

Sturdy Construction

All the machined components on the Rout-R-Lift II are CNC machined for durability.

No Bent Wrenches

The bits can be easily changed from above the table without the need for bent wrenches.

• 8.8 pounds Product
• Dimensions: 9.25 x 11.75 x 10.1 inches
• THIS MODEL IS DESIGNED FOR USE WITH PC 690/890, BOSCH 1617/1618, DEWALT 610/618/616, CRAFTSMAN 1754/17540/28190

User questions & answers

Question:	Fit craftsman 27683? I put wrong model number in before
Answer:	I wish I could answer that but not to leave you high and dry. Here is Jessems customer service number that I have used in the past. I hope this helps. 1-800-436-6799.
Question:	Will the rout-r-lift (jessem #02310) for 3 1/2 dia. motors take a 31/2" motor of a ryobi re1802m
Answer:	as far as i know you can put any 3 1/2 inch router in it. i have a porter cable 892 in mine
Question:	Anyone know if kreg plate inserts will fit this jessem plate? they're less than half the price of jessem's
Answer:	If you are asking about the Corner Leveling Plates (one for each corner) which is how the plate is secured to the Kreg Router Table (mounted under the table), NO. The four bolt holes on the JessEm plate do not align with the mounting holes of Kreg's leveling pads so you will have to order (directly through JessEm by phone) the pads that will work: "JessEm Corner Leveling Pads for home made and Kreg Tables Model #02027". Price is $21.99 + Shipping & Handling. I hope that helps.
Question:	Anyone mounted a jessem router table to a bosch ra-1181 stand
Answer:	That other answer makes no sense. This is a plate, very similar to the one in the Bosch table. I don't know why this product listing doesn't include a list of router tables it'll fit. The Bosch plate appears to be 11.5" x 9". Thus this one appears to be 1/4" too large in each direction... which is too bad, but not a deal-breaker if you're willing to cut it. I found the following comment in a forum, which supports my finding that the plate is slightly too large: "Had to trim 1/16"off each side of the Jessem's phenolic base to fit the Bosch table - and used the Bosch leveling hardware, drilled new corner locations for the Jessem holes to snug it down."

Product description

Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups



The Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3⁄8" x 91⁄4" x 113⁄4" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router models—without the need adapters or modifications—in a high-performance carriage that you raise and lower from above the table.



With the Precision Router Lift, there’s no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift’s included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.



Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriage—and your bit—exactly 1⁄16", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.



Whether you’re upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.

• Allows precise above-the-table setup changes for table-mounted routers
• Above-table collet access allows fast, easy, above-table bit changes
• 3⁄8" x 9 1⁄4" x 11 3⁄4" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won’t Sag, resists scratches
• Fits all Kreg Router tables and many competitive brands
• Bearing-guided carriage provides smooth operation

User questions & answers

Question:	Has anyone put a portamate router in kreg router lift? Pretty sure it's the same diameter as the porter cable
Answer:	Hello, If the diameter of that port-a-mate router is the same as the porter cable 7518 and there is no obstructions on that motor, you should not have a problem with it fitting. Thank You, Billy H Kreg Tech Support
Question:	How many inserts come with the lift
Answer:	Hello, There will be three Insert Rings that are included in your Lift. The Sizes are 1" , 1-3/16" and 2-5/8". Thank you, Billy H Kreg Tech Support
Question:	How far the the lift travel up and down
Answer:	The Kreg Precision Router Lift will have three inches of travel. This will allow bit changes above the table.
Question:	Does the kreg prs5000 lift fit to the bosch 1617evs router
Answer:	Yes, 1617 fits perfectly. Just make sure you follow the directions closely... meaning loosen the collar fully first, then insert the clamp bolts at position 5 on all four clamps, then slide the 1617 in, pull it 1/16” up from the stop, hold and tighten the collar with the lift wrench.

Product features

Precision Router Lift

Product description

The JessEm Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.

Double-Sealed Ball Bearing Construction

Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.

Bearing the Tension of the Lift

The shafts on the Rout-R-Lift II, like all the Router Lifts, are pressed into a shaft mount with hydraulic pressure. The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.

Sturdy Construction

All the machined components on the Rout-R-Lift II are CNC machined for durability.

No Bent Wrenches

The bits can be easily changed from above the table without the need for bent wrenches.

Bundle Includes:

• JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors
• JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems

• BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems
• COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors
• DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease
• LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations
• STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability

User questions & answers

Question:	Will a Ryobi router fit in this model
Answer:	If the Ryobi in question has a round body diameter of 3.5” it will fit in the standard version of the JessEm Rout-R-lift.
Question:	Guys help me out here. fit a dewalt dw618pkb? (2.75 hp
Answer:	It should work with all of the 618 motors
Question:	Can this attach to either a bosch pr20e router or a ryobi r163? and will the plate fit the bosch ra1171router table
Answer:	This router lift fits the router at the barrel of the router . The ad should tell you the diameter that it fit. It is adjustable. Measure the diameter of the router barrel (the motor). I have a Porter Cable router with a 3 1/2" barrel. JessEm makes top quality products. I could not be happier with mine. Hope this helps.
Question:	Will this work for bora pmp
Answer:	no it will not, but the MAST-R-Lift will B004AYEI0U

Product description

Complete your woodworking or home improvement project with ease with the Bosch Under-Table Router Base. This base is compatible with Bosch 1617 and 1618 series routers. This under-table router base has convenient wrench access above the table, allowing you to easily adjust the router's depth. Threaded holes make it easy to mount the base to a router table with the Bosch 4-hole subbase pattern, as well as router tables with the common 3-hole subbase pattern. Hardware is included to make the setup process as smooth as possible. The Bosch Under-Table Router Base has a wide, 3.75-inch opening, allowing you to use larger bits. The motor housing does not rotate during depth adjustments, and 2 additional protective devices prevent the motor from falling when the quick-clamp is released. Whether you are a professional or a DIY homeowner, this under-table router is sure to be a great addition to your toolkit.

The RA1165 under-table base is based on the durable Bosch fixed base but enhanced with an above-table bit height adjustment mechanism. The RA1165 under-table base can be mounted to virtually any table surface and common router table plates.

• NEW AND IMPROVED: The Bosch RA1165 Under-Table Router Base is the new base for the 1617/1618 series routers, replacing the RA1164
• ADUSTABLE: The RA1165 conveniently allows depth adjustment of bit height from above the table. The router base is designed for use with 1617, 1617EVS, 1617EVSPK, 1618, 1618EVS routers
• MOUNTABLE: The RA1165 base has threaded holes positioned in Bosch’s 4-hole subbase pattern and common 3-holes subbase pattern for mounting
• CONVENIENT: The wide 3-3/4 base opening allows for the use of larger bits while the quick clamp system allows the motor to be moved with ease for tool-free base changes

User questions & answers

Question:	Does this work with this router http://www.amazon.com/gp/product/b0006a0de2/ref=ox_sc_act_title_2?ie=utf8&psc=1&smid=atvpdkikx0der
Answer:	Thank you for your question. Yes, the 16176 router motor will work with the RA1165 router base. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	Can I use it with the Kreg PRS 1040 router table and my Bosch 1617 router
Answer:	Thank you for your question. We recommend that you contact the manufacturer of the router table to verify if it is compatible with the Bosch 1617 series routers. If they are the same, yes the RA1165 will work with your table as it has the same hole pattern as the 1617EVS router. If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	I would like a suggestion for a plate to mount this to please? I intend to make my own router table top and would like to attach this to a plate
Answer:	Mine is mounted to a custom 3/8 plexiglass plate With the handles removed, I was able to give my baseplate a small footprint (7x7). Plexiglass made it easy to see where I needed to drill for the hex lift opening.Someone suggested 1/4 plexiglass, which I think *might* flex slightly under the weight of this router. Several years ago I used 1/4 plexiglass on another router and got that result -- HOWEVER, it may be worth a shot. With the smaller 7x7 footprint, there may be no flex.
Question:	CanI use this RA 1165 Base with my Porter
Answer:	Nope. The mounting pattern is the same. The 10-24 screws are the same. The motor diameter is the same. However, there are three issues. 1) there is a pin in the base for which there is no slot in Porter Cable motor the motor won't slide past. 2) there are pins on the Porter Cable motor that do not slide past the 'bottom' opening of the base (they do slide in the 'top', so apparently the bottom is tapered and, even if you file pins or whatever... 3) the height adjustment mechanism on the base goes into one of 3 notches in the Bosch router motor. The Porter Cable motor does not have those notches and so the height adjustment purpose is lost

Product features

Router Undermount Base

The RA1165 under-table base is based on the durable Bosch fixed base but enhanced with an above-table bit height adjustment mechanism. The RA1165 under-table base can be mounted to virtually any table surface and common router table plates. It includes hardware for mounting to router table and an T-wrench for adjusting the depth from above the table.

• Base has threaded holes for mounting to router table positioned in Bosch 4-hole subbase pattern and common 3-hole subbase pattern. Hardware included

• Motor housing does not rotate during depth adjustment, — eliminating potential cause of horizontal movement of bit

Product description

Built for heavy-duty precision, the SawStop router lift features a chain-synchronized four-post lifting system, positive Lock, precision above-table Elevation measurement and adjustments, and adaptive collars to fit multiple router sizes. 9.25" x 11.75" top plate fits perfectly into each SawStop router Table.

• Maximum Router diameter: 4 1/4"
• Minimum Router diameter: 3 1/4"
• Phenolic insert ring diameter: 3 3/4"
• Router reducer collars (included): 3 1/4" & 3 1/2"

User questions & answers

Question:	Does Sawstop also sell a router to use with this system
Answer:	Thank you for your interest. We do not sell a router at this point.
Question:	Will the triton tra001 fit this lift
Answer:	Thanks for the question. The diameter of the router is 3.5" which is compatible with our Router Lift. However, the handles will need to be removable in order to make it work. If you have any other questions, please contact our Technical Support at [email protected] or 503-582-9934.
Question:	what is the thickness of the top plate, I want to use this lift in my router table
Answer:	The thickness of the top plate is 0.238". The Saw Stop table has leveling screws for making this flush with the router table.
Question:	Will this work with Milwaukee 5616-24 router
Answer:	Thanks for the question. Maximum router diameter – 4.20”, Minimum router diameter – 3.25”, If the router is significantly smaller than the diameter of the clamp, use the router reducer collar so the clamp can hold the router more securely. Reducer collars come in 3.5” and 3.25”. The most common router our customers use is the Porter Cable 7518. Plunge routers are not compatible with our router lift, and we currently don't offer plain router plates.

Product description

The PRL-V2-420 fits the Porter Cable 7518 router. Augments basic router plate capabilities with a bulletproof lift mechanism and an impressive array of time saving, precision enhancing features that are accessible from the top of the plate. Thumb wheel micro adjuster allow quick and easy bit height adjustments with easy reading scale built into the top. Patented Quick-Lift wrench allows you to bypass the micro-adjustment mechanism and elevate the router collet so you can use your wrenches above the table. Built to deliver years of trouble free performance.

• Fits Porter Cable 7518 router
• Instant Quick-lift with spring assisted wrench
• Micro Adjust with thumb wheel
• One piece motor carriage for maximum rigidity
• Includes 3 self leveling Twist-Lock rings

User questions & answers

Question:	What is the difference between the prl-v2-420 and
Answer:	They accept different router motors. The 420 "Comes with (1) set of motor pads available for 4.2" diameter motors such as: Porter Cable 7518 / 7519". The 350 "Comes with (1) set of motor pads available for 3.5" diameter motors such as: Bosch 1617, 1618 Craftsman 17542, 17540, 28190 Porter Cable 690, 890 Dewalt 618". Check with the woodpeckers web site to match up your router with the right lift. Mine works great.
Question:	There's something amiss on the product picture. Looks like the pin is on the wrong side of the plate
Answer:	Would depend on which side of the router table you were standing on. There is a tapped hole on the side that would be the infeed the majority of the time, you can see it if you zoom in.
Question:	This one says it is for the Porter Cable - how do we order the Bosch version
Answer:	Go to woodpecker’s web site and they have a list of routers that fit specific lifts
Question:	Is this lift compatable with a triton tra001 router
Answer:	This router list only works with router motors. The Triton tra001 is a plunge router and not compatible.
Question:	Will a Ridgid R22002 fit in this
Answer:	Compatible Motor Diameter: 4.2'' (13.19'' circumference). 3-1/4'' Pro Lift Adapter Collar which you will have to purchase separately, (#50098, accepts motor with 3-1/4'' diameter or 10.21'' circumference such as the Makita RF1101 and Others. 3-1/2'' Pro Lift Adapter Collar (#57022, sold separately, accepts motor with 3-1/2'' diameter or 11'' circumference.) such as the Bosch 1617, Porter Cable 690 series, , Porter Cable 890 series, Dewalt 616 and 618 and others. In order to answer your question, you will need to measure your router to determine if the above fits your situation.
Question:	How do I buy it
Answer:	Go the Rockler website.
Question:	Does this fit kreg router table
Answer:	Be very careful. There are two sizes. Make sure you verify table and lift size. I ended up buying two lifts because of a poor description.
Question:	What's the largest bit diameter that this lift plate will accomidate
Answer:	Rockler sells a variety of plates that fit the pro-lift device. I believe that 2 3/4 inch is the largest one that I bought. Others maybe available from Rockler.
Question:	Will the PC 7539 fit in this lift
Answer:	What is the motor can diameter? The 7539 is not on the list of compatible routers
Question:	will it work with a Makita 1101 router
Answer:	Yes, the Makita 1101 router is on the list of compatible routers for the JessEm Mast-R-Lift II 02121.
Question:	Is the plate suppose to be packaged with the rest of the lift
Answer:	I bought this lift in Jun 2013. Yes, it come with the plate attached. Very happy with the lift.
Question:	Will jessEm mast-R-lift 02121 fit in Benchdog 40-102 proMax castiron extension table
Answer:	Yes, I bought both the JessEm Mast-R-Lift II 02121 and the Benchdog 40-102 ProMax cast iron extension table and it fit like a charm. 8 -1/4 x 11-3/4 plate on the router lift. You get all the leveling screws with the lift and installing is not difficult, just a little tedious getting it all level with the table. You only get one locking insert ring with the lift, so order the locking insert ring set separately and you'll be good to go.

Product description

Raise and lower your router without having to remove it from your table with the Incra Mast-R-Lift II Router Adjustment System! This convenient and simple cam router adjustment system lets you quickly make precise 0.001" bit height adjustments from above. Simply use the included lift crank for absolute precision with the naked eye. Features five sealed ball bearings on the lift screw and cam lock, giving you super-smooth operation with the slightest of effort. Includes five steel reducing rings for instant ring changes. And all five are magnetic for a fast, easy, and perfect ring fit. Will this lift work with my router? Compatible routers: Bosch 1617EVS, 1618 Craftsman 17543 Craftsman 17540 Craftsman 28190 DeWalt DW610 DeWalt DW618 Hitachi M12VC Hitachi KM12VC Milwaukee 5625 Milwaukee 5626 Milwaukee 5615 Milwaukee 5616 Milwaukee 5619 Porter Cable 7518 Porter Cable 690-699 series Porter Cable 890 series Rigid R29302 Makita 1101 Will this lift work with my router table? Compatible router tables: Rockler router tables Bench Dog ProMaxRT Cast-Iron Router Table ProMAX Cast-Iron Router Table Extension for Table Saws ProTop Contractor Portable Router Table (if the snugger bar is removed from the underside of the lift.) 8-1/4" x 11-3/4" x 3/8" plate size is compatible with all full size Rockler router tables and fits some other brands Does not fit standard Incra Router Tables.

• Adjust the height of your router bit without having to reach below the table, or remove the router plate. Just slip in the lift crank and wind it up or down!
• Exclusive INCRA MagnaLOCK reducing ring system for instant ring changes and perfect ring fit
• Quickly make super precise, 0.001" height adjustments from above
• Exclusive ball bearing mechanism for super smooth action and low friction
• Ultra-responsive, direct drive 16TPI lift screw mechanism

User questions & answers

Question:	Can the bits be changed from above
Answer:	Yes. Simply crank the router to its highest point.
Question:	Does it fit Bosch 1617 Router
Answer:	Yes. The manual that comes with it has decent instructions for setting up for various routers.
Question:	What is the snugger bar that is required to be removed for the benchdog protop contractor portable router table? seems ominous
Answer:	The snugger bar should not have to be removed when using a table with a standard opening. When the lift is lowered into the table there is a ledge that the plate sits on that has the adjustment screws installed in. I see know reason that if the ledge Is to wide to allow room for the snugger bar that could trimmed a little. Also the snugger bar has some adjustment. My master lift is installed into a full size Bench Dog cast iron table great combo. also I have developed a dust collection box with a very unique way to control dust and air flow thru the router motor.
Question:	Will this fit Bosch 1619 evs
Answer:	Yes, instructions do a good job of explaining router clamping block set up. Had mine for about 8 years with several different router motors and I'm still loving the the lift. Don't think you can go wrong with this lift. Just keep it blown out and lubed.

Product description

Engineered to draw the dust down from the router bit and deliver to a 4" port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangable panels for optimum dust port and Vent placement. Plug the 2.25" dust hose from the router fence directly into the dust box's branch inlet, and let the 4" port deliver above and below Table dust from the same port.

• Collects below-table dust
• Connects to 4” dust tube
• Compatible with all SawStop Router tables
• Item Package Dimension: 15.0" L x 14.0" W x 7.0" H

User questions & answers

Question:	Will the triton tra001 fit in this box
Answer:	I use a Triton TRA001 router in my Sommerfeld router table. I had to modify the SawStop dust collection box so the TRA001 would fit into it. I added about 2 1\2" to the back of the box to allow enough space for the router. It works fine but if you can find a bigger box that didn't need to be modified I'd go that way.
Question:	Where is this manufactured
Answer:	Ask Rockler for more certainty. In my experience If it was made in America then that would be a huge marketing slogan, that isn’t the case with this product so my guess is China or Taiwan like everything else
Question:	This lift have its own levelers or do you have to purchase them
Answer:	It comes with the leveling screws.
Question:	Will this fit a 3 in router body
Answer:	Not as is. You need to buy a reducer collar from Rockler. I know they make reducer collars for 3.5” and 3.25” routers, not sure about 3.00”
Question:	Is this lift primarily all metal
Answer:	Yes

Product description

While the original Rout-R-Lift created a whole new category of tool for the woodworker, the Mast-R-Lift Excel II from JessEm Tool Company represents true evolution in router table design. Rather than fitting a separate router lift into a large table opening, the Mast-R-Lift Excel II consists of a integral router lift mechanism securely bolted to the table top resulting in a smooth, flat table surface. Mast-R-Lift Excel II features a unique motor clamping system that can be configured to accept most sizes of cylindrical fixed-base router motors and a remote crank handle for bit height adjustment conveniently located below the infeed side of the table-top. The Mast-R-Lift Excel II includes 2" insert ring, insert ring wrench, start pin and all necessary hardware to mount to a JessEm stand and router table fence. Photo shows placement of optional Digital Readout Attachment, item #153676 not included with purchase of item #851971.24" x 32" x 3/4" solid phenolic top with built-in router lift mechanismUnique router clamping system fits most fixed-base router motorsRemote crank handle with dedicated cam-lock mechanism to prevent spindle rotationExtruded aluminum 3/4" miter track with accessory T-slot, 4" dust portOptional Digital Readout Attachment not included

• Unique router clamping system fits most fixed-base router motors

User questions & answers

Question:	Can you mount this to the sawstop pcs table saw
Answer:	You may need to drill some holes and create some brackets, but I think it could be done
Question:	Does this accept the porter-cable 895pk or ridgid 22002 router
Answer:	According to the Jess-em web site, these are the compatible routers for this lift: Porter Cable 7518 (4.2” Motor Dia.) Porter Cable 690/890 (3.5” Motor Dia.) JessEm's Pow-R-Tek Router Motor - (4.2" Motor Dia.) Bosch 1617/1618 (3.5” Motor Dia.) DeWalt 610/618/616 (3.5” Motor Dia.) Makita 1101 (3.218” Motor Dia.) Hitachi M12VC & KM12VC (3.267” Motor Dia.) Milwaukee 5625 (4.143” Motor Dia.) Milwaukee 5615/5616/5619 (3.32” Motor Dia.) Craftsman 17543/17540/28190 (3.5” Motor Dia.) Rigid R29302 (3.625” Motor Dia.) Portamate PM-P254 - (4.2 Motor Dia.)
Question:	is a fence including
Answer:	No. Thee is an optional fence you can buy.
Question:	Can you mount this to a Kreg stand
Answer:	I would think so, but you may need to drill some extra holes in the stand for mounting and or drill and tap holes in the phenolic plate