11 best la crosse technology am radios

Product description

Be ahead of the weather with La Crosse's Sporty designed weather radio. Rugged frame for active portability and bonus features. Instantly alerts with NOAA weather band channels and LED backlight change. LED backlight & Red alert indicator at the top of the radio warns you. Tune to its high-quality digital radio with USA-MADE IC chip! Use the included lanyard to the anchor shaft at the bottom of the radio for carrying. Uses 3 AA batteries (not included. )

• Receives NOAA weather band channels
• Automatically activates when severe weather or other emergencies threaten your local area
• Blue backlight changes to red, LED light changes RED and flashes during alerts
• AM/FM radio reception with high quality digital IC chip
• White LED (low-watt) flashlight
• Requires 3 AA batteries (not included) or, optional 6. 0V AC adapter (sold separately)

User questions & answers

Question:	Does the radio remember the last station when you turn it back on
Answer:	Yes. I like this radio better than the eton that it replaced. And the batteries last just as long. It is also small and light enough to go camping.
Question:	how is the battery life
Answer:	Battery life is good. I listen while gardening and riding my bike, often forgetting to turn it off when I come in to cool off. I go several days without changing batteries, and I use rechargeables, which I find have less life than disposables.
Question:	Does this have a speaker or do you only listen through headphones
Answer:	Both... Listening to the speakers or you could use with earphone (or headphones) jack listen to yourself.
Question:	Does this radio have SAME? Where it goes off during emergencies like Tornados and Bad Storms
Answer:	The Radio does not have SAME (Specific Area Message Encoding). It does have an excellent alert for tornadoes and bad storms.

Product description

Receive up-to-the-minute weather updates. This convenient handheld am/fm weather radio receives seven different NOAA weather band channels. It also functions as a standard am/fm radio for recreational use. The integrated led flashlight is helpful during power failures or outdoor activities. Requires 2 AAA batteries.

• Receives all 7 noaa weather band channels
• Standard am/fm radio reception
• 3-1/2mm earphone jack
• White led flashlight
• Hand strap for easy transport

User questions & answers

Question:	Does it have bluetooth
Answer:	I don't have large calves either and ordered half size up and it fits perfectly.
Question:	How old is this unit
Answer:	Unfortunately, I don’t believe they would work for you. The bootts aren’t very wide. I wear a 7 1/2 B. Purchased a size 8. It runs a little big but heavy socks took care of that issue. They are great boots though
Question:	Will the subwoofer replace a V20 Lifestyle subwoofer
Answer:	I’m a 7.5 and w winter foot ware I always size up bc I plan on having thick socks on.
Question:	Cables included
Answer:	I wear size 11 and ordered these in 11. In my opinion, I find them comfortable even with a thick pair of boot socks.

Product description

Receive up-to-the-minute weather updates. This convenient handheld am/FM weather radio receives seven different NOAA weather band channels. Armed LED light indicates setting to tornado only alerts to filter out unwanted alerts when you sleep. No programming required. Blue LCD backlight illuminates in standby mode and changes to red during NOAA alerts. Dual color LCD also features scrolling alert text. 3 LED alert lights change with warnings: ADVISORY/watch/Warning. It also functions as a standard am/FM radio for recreational use. The integrated LED flashlight is helpful during power failures or outdoor activities. Ergonomic, rugged design with non-slip grip for perfect handheld use.

• One button selection: TORNADO only alerts or all alerts
• LCD changes from blue to red during weather alerts; 3 LED alert lights: advisory/watch/Warning
• USA IC chip for high-quality digital audio radio optimum am/FM reception
• Scrolling weather text on LCD
• Built-in bright LED flashlight

User questions & answers

Question:	IS there an ear plug jack on this radio
Answer:	Bolt under seat that is attached to the post. Make sure clamps/teeth are facing each other and tighten
Question:	What replacement antenna
Answer:	Not completely, but the difficult stuff comes assembled. You will need a few tools like a screw driver. Was very easy to do on my own.
Question:	Does this item come with a charge cable and charge dock/station
Answer:	It fits my wife who is 5’7”, I don’t think it would be big enough for a much taller woman.
Question:	I have lost operation instruction book, I need to know how to set it for emergencys in local area
Answer:	They sell same bikes womans bikes at Walmart I don't understand how they charge huge prices on huffy cruiser bike blue ones I'm going to wait till I get them at Walmart $ 148 I payed on ur site same bike on Amazon $329 and never received it I gave up they sent message that didn't make sense I buy everything on Amazon love it these bikes are to high still love Amazon just being truthful.

Product features

La Crosse S83301 NOAA/AM/FM Weather Alert Radio

Ergonomic, rugged design with non-slip grip

Different from other weather alert radios:

One easy button activates theTornado Only Option .* (filters out unwanted alerts).

CONFIRM (choose between Tornado Only Or All Alerts / Press and Hold Confirm to enter/exit standby mode.

Standby Mode: Blue LED will flash slow, every 5 seconds (flashes rapidly, if alerted of Tornado watches or warnings).

Automatically activates when a Tornado may threaten your local area. When an alert is happening, the radio will unmute and play warning message and scroll across screen.

No programming required. Plug in AC cord and the radio finds the first available Weather Band channel from the location of the radio.

White LED flashlight (0.5 watt - low consumption).

Backlight changes to RED (flashing) for Extreme Weather warnings

You can be warned for all alerts (any Weather Situation) featuring a RED flashing LCD with a scrolling alert message. Radio will increase to broadcast the warning.

Color-coded alert lights (Advisory, Watch, Warning).

ARMED Blue alert LED blinks slow for standby & fast for alerts.

Standard AM/FM radio reception.

High quality digital radio (USA made IC chip).

Product description

Stay abreast of weather developments with the NOAA Solar Weather Radio. The NOAA weather radio with an AM/FM solar panel has a mini USB adapter, an LED flashlight, and mini USB port. The blue backlight changes to red during weather alerts, and the radio includes an LED flashlight. A cranking time of 1 minute equals 30 minutes of use, and a solar panel will power the radio all day in full sunlight. The radio includes a 3.5mm headphone jack.

• Nullify
• All 7 NOAA weather, and high quality digital AM/FM channels
• Mini USB port
• Solar panel for recharge
• High-intensity LED flashlight
• Cranking time of 1-minute equals 30-minutes of use

User questions & answers

Question:	Will this emergency radi with sub port charge a I pad or cell phone
Answer:	I ordered for my adult daughter size 6 or 6 1/2, can’t remember and they were the size of a child. These are coming from overseas and the sizes are really small. Good luck!
Question:	Does it have an output for headphones
Answer:	I found it was great quality. I wore my boots for carnival (which is dancing down the road for hours drinking etc) and by the end of the day it was still in perfect shape.
Question:	Is it constructed well and what material is it made of
Answer:	They a pretty narrow in the shoe part.
Question:	does this also take AA or AAA batteries
Answer:	If you don't have an extra large calf they will go up to your knee.

Product description

La Crosse Technology has packed a lot into this stylish throwback projection alarm clock. Wireless 5w Qi enabled charging pad and USB charging port ensure that your devices are ready to go when you wake. It even has a removable stand for your smartwatch. Liquid crystal display shows current time, date, indoor temperature and humidity, and outdoor temperature and humidity (*sensor sold separately. ) Choose from four brightness levels or program to automatically dim at preselected times. Adjust the armature to project time, outdoor temperature and humidity*, or both onto the wall or ceiling. Handy magnetic cord organizer keeps things neat and looking sharp.

• 5 Watt Wireless charging cradle with indicator and smart watch holder; Universal compatibility for Qi-enabled phones (charges horizontal or vertical); Also, included 1 AMP USB charging port (external charge cable not included) with magnetic cable cord organizer for neatness & simplicity
• Dynamic Color LCD with manual 12/24 hour time and crescendo alarm; Displays calendar: weekday/date; AM/PM with seconds; indoor temperature (F/C) and humidity (%RH)
• Adjustable projection intensity (HI/LO/OFF) with rotation wheel for proper viewing angle; Projection display: Time Only, or Outdoor temperature/humidity only (if applicable), or alternate between both options
• Backlight intensity (HI/MED/LO/OFF) with Programmable Auto-Dim feature
• Includes 5. 0V AC adapter power cord to operate (no batteries required – internal memory holds settings up to 6 minutes if clock loses power)
• Power Source Type: Corded Electric

User questions & answers

Question:	Will this clock charge the Iphone
Answer:	Hi, Yes You can charge two devices at the same time. The wireless charging part is suitable for mobile phones that enable wireless charging such as iPhone 11 Pro Max/11 Pro/11/XR/XS Max/XS/X/8 Plus USB charging port can charge your Android or iPhone
Question:	Does it work on 110 volt only or does it support 220V also
Answer:	No, its actually a very simple clock. I still can't figure out how to get it to turn to an actual radio when it goes off. Its just static.
Question:	The projection screen rotates so you can adjust how the time shows on your ceiling. There is a wheel that rotates
Answer:	It doesn’t it’s steady and flat
Question:	Will this work for Galaxy note 10 plus
Answer:	I’m not sure but radio alarm clock works great I have not had any problems with it

Product features

Soft Touch buttons & Projection Arm Tilt

• Projection arm tilts backwards & forwards for best projected view (ceiling or wall)
• Rotation dial will rotate projected angle of image (best fixed focus range: 7ft (2.1m)
• Soft touch access buttons gives smooth surface look

Projection Alarm Clock with Wireless Charging

• Crescendo alarm increases over 2 minutes
• Adjustable snooze duration (5 to 120 minutes)
• LCD brightness levels (4 intensity + OFF)
• Programmable Auto-Dimming

Add-On (optional) Thermo-Hygro sensor

• Purchase separately a Add-on thermo-hygro sensor (TX141-Bv3) to add real-time outdoor temperature & humidity, right from your own backyard, to display on clock's LCD and projection
• Indicator icons: Low battery, Auto Dim, Projection selection (or Cycle)
• Clock features an internal backup (requires no extra batteries): will hold settings up to 6 minutes in the event you lose power

Wattz 3-In-1 Projection Alarm Clock

It's Time to Take Charge of Your Day!

Meet Wattz, a retro 3-in-1 projection alarm clock designed to fit your modern needs. Keep both your phone and smartwatch ready for action with the integrated 5W Qi-enabled charger, removable smartwatch stand, and included USB charging port. Remove the brightly lit display while sleeping by activating the projection light, which can project your time and outdoor conditions* right onto your ceiling. Remain informed with easy to read time, date, temperature, and humidity readings right on the vibrant liquid crystal display.

Product description

Full color display gives you current temperatures & humidity, with a future forecast whether it could be sunny or rainy to snowy. Features accurate, self-set atomic time & date with automatic DST updates. Records min/max values and alerts you of extreme temperatures. Also displays your heat index and dew point. Will indicate of weak or low battery and the signal reception strength.

• Dynamic forecast icons with tendency arrows
• Temperature & humidity (hi/lo) customizable alerts
• Comfort level color bar
• Adjustable backlight.Sensor dimension: 1.57 L x 0.79 W x 5.12 H inches
• Self setting accurate atomic time and date with automatic daylight savings time reset (on/off optional)

User questions & answers

Question:	Why doesn’t outside temp register? Inside temp is working I also put in brand new batteries
Answer:	Check that your batteries are charged to 1.5. If you don't have a way (voltage meter) to check, try brand new batteries that are new off the store shelf. For the sync-up process, the batteries must be 1.5 or better. It's the #1 problem we see.
Question:	Hello. . . i love this weather station but the aa batteries in my remote die very quickly. what batteries work bet for you
Answer:	All outdoor sensors should use Energizer Ultimate Lithium batteries. Alkalines will freeze, rechargables start at a max of 1.4 v and drop to 1.2 v fairly quickly and do not like extreme cold. They do not work in Iowa winter. All my external sensors use AA Ultimate Lithiums and last the entire winter, even at -15 below zero F. I change them out every Fall.
Question:	Looking to mount this unit flat on a wall. Wtith power cord attached, would this unit sit flush against the wall
Answer:	Yes, it can be wall mounted and sit flush against the wall even with the cord attached.
Question:	Is it necessary to buy the la crosse technology tx141th-bv2 wireless outdoor thermo-hygrometer $19.95 to make the wireless forecast station wireless
Answer:	If I may say, you might want to reconsider a product from LaCrosse. I have had an s85814 weather station for about 3 years and it currently serves as the night light in my bedroom. It never worked and LaCrosse wasn't much help. The temperature outside was always off by close to 20 degrees. Don't do it, you'll regret it!

Product features

La Crosse Technology C85845 Wireless Forecast Station with Colored LCD Display

La Crosse Technology introduces a Wireless Color Weather Station with precise, real-time backyard weather. Animated color forecasts with trends react to changing barometric pressure. Monitor in/out temperature trends with high and low alert settings. Measure in/out temperature and humidity with daily min/max records--all on one easy-to-read color display with adjustable brightness.

Wireless transmission

• Included TX141TH-Bv3 weather resistant sensor transmits temperature & humidity
• Transmission range: 330ft (100m) (no obstructions).
• Requires 2 AA batteries (not included).
• Indoor Temp Range: 32˚F to 122˚F (0˚C to 50˚C).
• Humidity Range: 10% - 99% (RH).
• Outdoor Temp Range: -40˚F to 140˚F (-14˚C to 60˚C)

*Recommend mounting sensor vertically, out of direct sunlight and in well-ventilated sheltered location. Metal siding, stucco, and some types of glass can greatly reduce the signal's range.

Dynamic full color display with Intelligent Forecast

• Color forecasting icons (allow 7-10 days for barometric calibration to ensure accurate personal forecast for your location).
• Heat index and dew point.
• Adjustable backlight (HI/LOW/OFF - using 5V AC adapter only)
• Indoor & wireless outdoor temperature (F/C) and humidity (%RH) with MIN/MAX recorded data.
• Comfort level charts (Indoor & Outdoor).
• Trend indicators
• Alert settings for Indoor & Outdoor temperature & humidity values.
• Time alarm with 10 minute snooze

Top Access buttons for Simple Setup

• Self setting atomic time and date (manual set optional).
• Automatic Daylight savings time resets (ON/OFF option).
• Seven USA time zones (Atlantic to Hawaiian).
• 12/24 hour time mode.
• Signal strength, Low battery, Atomic reception indicator icons.
• Display can be wall hung or kick-out leg stand to set onto desk or table.

Requires 5.0V AC adapter, but optional 3 AA alkaline batteries (not included) for backup to any power loss. *If operating by only batteries, some features such as adjustable backlight settings (HI/LOW/OFF) will not function.

Product description

• Specifications : Input voltage for AC/DC adapter: 100-240 VAC , Charging current range: 200 mA - 1800 mA . Power Requirements : Display : AC power adaptor included , Dimensions : Display : 3.00 x 1.50 x 5.10 (are in inches )
• Lcd shows capacity for each battery when charging is complete
• Charges aa and aaa rechargeable batteries simultaneously
• Select different charging current for each channel: charge, discharge, refresh, test; automatically switches to trickle charge when charging is complete to ensure maximum battery capacity
• Overheat detection to protect over-charging
• Works with all nicd and nimh "AA" and "AAA" rechargeable batteries; charges AA and AAA rechargeable batteries simultaneously
• LCD shows capacity for each battery when charging is complete

User questions & answers

Question:	Does the model accurately charge C or D size batteries
Answer:	I have only used it to charge AAA and AA. It comes with with adapters for C and D batteries that the AA fit into. Based on the size I do not believe C and D batteries will charge properly. Also from the manual "charging unit which enables quick and optimum charging to AA and ―AAA rechargeable batteries"
Question:	Does this charger have the ability to charge 1 battery or 3 batteries at a time? Or do you have to have a 2 in each bank
Answer:	I own 3 of these. You can charge anywhere from 1 to 4 batteries at a time, and they can be mixed type. For example, you can charge 3 AAA and 1 AA at the same time. I love these chargers.
Question:	Can someone tell me whether the batteries that come with this pack are low self-discharging (LSD
Answer:	They are the ordinary (high-self-discharge) type. The AA cells are not that great, as they were tested to around 2200mAh only. The AAA cells are around 900mAh.
Question:	What are the benefits of the BC1000 over the BC-700? Are they worth paying extra for
Answer:	I have both. The BC1000 can also charge at 1000, 1500 & 1800mA. 2 batteries only at 1500 & 1800mA. The problem I'm running into is at anything above 700mA, the thermal cut out kicks in and the charger stops charging until the batteries cool down. All my batteries are Eneloop or Amazon high capacity. (the Amazon batteries are Eneloops) So if you already have a BC-700...IMO I don't think it's worth upgrading unless you need a second charger.

Product description

Protect your outdoor sensors from rain and snow with our durable weather shield. Use with almost all La Crosse Technology's temperature and/or humidity sensors (sold separately) and mountable onto wall post or flat surface. Multiple plate tier design shell that covers over your outdoor sensor with built-in probe wire hole in base stand. Heat resistant plastic case and stands 7 Inch tall and almost 4 inch diameter.

• Wall mountable or place onto flat surface, includes hardware
• Only recommend weather shield to use with most La Crosse Technology sensors: TX21 (WS-1517), TX18U, TX6U, TX7U, TX8U (w/o CAP), TX141, TX141-A & B
• TX142TH, TX142THv2, TX143TH, TX19, TX191, TX25U, TX28U-IT, TX29U-IT SERIES (TX29UD-IT, 29UDTH-IT, 29UTH-IT), TX31U-IT (1510/1910 SERIES)
• TX37U-IT, TX38U-IT, TX39U-IT, TX40U-IT, TX45UTH-IT, TX45U-IT, TX50U-IT, TX60U-IT, TX62 SERIES, TX70U-IT, TX71U-IT
• Tiered plate design for optimal air ventilation & Shield slides over sensor for protection and turn-lock base to secure

User questions & answers

Question:	Can i use this sensor to replace the one i currently usemodel tx37u or do i buy a total new set
Answer:	This isn't a sensor. This is a sensor weather shield. Your sensor that came with your weather station goes inside the shield. If you need a new sensor, you will need to buy that separately.
Question:	Can this be used with tx141th bv2 sensor that does not have a probe
Answer:	I have used this shield with three different types of outdoor sensors by different manufactures. If the sensor can fit within the housing of the shield and stand up against the pedestal inside (attached to the pedestal with a sticky tape) then I would say yes it can. None of my sensor have a probe, but the shield is designed to handle a probe as well. Good luck.
Question:	We here in Colorado, have a lot of wasps (or wasp impersonators) this looks like a perfect starter hive for a queen; anyone seen this
Answer:	The slots are definitely large enough for wasps. You could slip a rolled up screen inside, but even the vent slots on the bottom would have to be covered as well. I wouldn't try to spray the inside with wasp killer (repels them as well) because the plastic is so cheap it would likely dissolve. My Colorado wasps are not deterred by "bright light" as they built a nest inside one of my outdoor light fixtures/wall sconces where the lights are left on all night (learned that when I got stung changing the bulb!) I just hung them up without any screen or other deterrent. I guess I'll know in a month or two!
Question:	Is this unit effected wheather it is the direct sunlight or shade
Answer:	Yes it is. Only is affected by direct sun radiation (9:00 to 14:00), you need to put it at the shade to eliminare the sun effect.

Product features

Only Recommended Sensor Shield For Most Of La Crosse Technology Sensors

Model: 925-1418 La Crosse Technology Sensor Shield for most La Crosse Technology sensors.

Built-in access for any sensors' wired probe

Mountable onto flat surface or wall post.

Fits most LT temp and/or humidity sensors (Fits TX Sensors measuring: 1.57L x 0.79W x 5.12H).

Shield measures 7.00 H x 3.73 W x 3.98 D inches.

Tiered plate design for optimal air ventilation

Shield slides over sensor for protection and turn-lock base to secure.

Protection from Rain and snow exposure.

Limited protection from sun's heat exposure.

Wall mountable or place onto flat surface, includes hardware

Does not included outdoor sensor (sold separately).

Fits sensors: TX21 (WS-1517), TX18U, TX6U, TX7U, TX8U (w/o CAP), TX141, TX141-A & B, TX141TH-A & B, TX142TH, TX142THv2, TX143TH, TX19, TX191, TX25U, TX28U-IT, TX29U-IT SERIES (TX29UD-IT, 29UDTH-IT, 29UTH-IT), TX31U-IT (1510/1910 SERIES), TX37U-IT, TX38U-IT, TX39U-IT, TX40U-IT, TX45UTH-IT, TX45U-IT, TX50U-IT, TX60U-IT, TX62 SERIES, TX70U-IT, TX71U-IT

Mounting hardware includes zip ties for temporary mounting; 4 metal screws for permanent mounting; hook and loop strip to secure sensor onto base.

Product description

Wireless transmitting sensor sends accurate & fast outdoor temperature and humidity measurements with its 433MHz frequency. Place sensor in a dry, shaded location to protect from moisture build-up and direct sun exposure (may cause higher readings. ) A proper location is on the North side of your house, about 18 inches under the eaves. Weather resistant case and battery powered.

• Compatible with models: 308-1414B, 308-1414W, 308-1414MB-INT, and 308-1425C
• Wireless transmission of 300ft range (open air); Temperature range: -40 F to 140 F (-40 C to 60 C)
• Outdoor humidity: 10% to 99% RH; Transmission range: 300 ft. (60 meters)
• Powered by 2-AA batteries
• Note: Mount the sensor on a North-facing wall or a well-shaded location. Direct sunlight will make temperature read high. Recommended: 6 inches below eaves or placed under deck rail is preferred. Be sure the outdoor sensor is mounted vertically to drain moisture. The maximum wireless transmission range to the weather station is over 300 feet (91 meters) in open air, not including walls or floors.

User questions & answers

Question:	Will this item be compatible with lacrosse tech atomic clock ws-8117u-it? outdoor sensor model tx37u-it unavailable
Answer:	Sure. It works
Question:	Where is the model number in the clock
Answer:	Not necessarily for the day, by pressing the TEMP button it will show the high and low records and the date that they occurred.
Question:	how do i change batteries
Answer:	It does set its own date and time.
Question:	Will this work for c
Answer:	Since I bought this weather station I have not had to replace the transmitter batteries.

Product features

Wireless Outdoor Thermo-Hygrometer Transmitting Sensor

Wireless transmitting sensor sends accurate & fast outdoor temperature and humidity measurements with its 433MHz frequency. Place sensor in a dry, shaded location to protect from moisture build-up and direct sun exposure (may cause higher readings.) A proper location is on the North side of your house, about 18 inches under the eaves. Weather resistant case and battery powered.

Accurate and Fast!

• 433MHz frequency
• Detects Temperature and humidity
• Red LED light will flash when transmission occurs
• Temperature range: -40 F to 140 F (-40 C to 60 C)
• Humidity range: 10 to 99%
• Update interval: About every 58 seconds

Endless possibilities (Use for indoor or outdoor)

• Wireless, battery operation
• Weather-resistant, not waterproof
• Recommended sheltered from extreme weather, such as: constant precipitation, direct sunlight
• To Position your sensor: Mount sensor outdoors on a North-facing wall in well-shaded area; 18 inches under eaves; or deck railing, are preferred locations
• Mount sensor in vertical position to drain moisture
• Maximum transmitting range is up to 300 ft (91m) in open air (walls, floors, windows can reduce range)

La Crosse Technology - Weather When You Need It

• Powered by 2-AA batteries (not included)
• Optional to use alkaline or lithium batteries
• Recommend using batteries; Expiration date 6 years in advance of current year or 1.48v read on voltmeter, good brand name (reduces RF interference)

Product description

See what time it is on the ceiling or wall without having to get out of bed. Projects time only with adjustable in 90 degree rotation to set projection the way you want it. 12 or 24hr manual set time and displays the room temperature (F/C) and humidity (%RH. ) Adjust your view from a calendar date or full weekday display. Also can adjust brightness settings for the backlight. Use included AC adapter to operate, but optional backup requires (not included) 2 AAA batteries.

• Time projected onto wall or ceiling
• 360° projection image rotation and adjustable focus
• Monitors indoor temperature (F/C) and humidity (%RH)
• 12/24 time display mode with Full weekday view
• 4. 5V AC adapter powered or optional battery operation (2 AAA, sold separately)

User questions & answers

Question:	What is the power supply range? i want to buy it as a gift for someone in india. will this work in india
Answer:	Yes, at the push of one button you can view Farenheit or Celcius.
Question:	Does the projector always stay on, or is there a button to activate/deactivate it
Answer:	The projected time and temperature alternate every 4 seconds. However, the time and both temperatures (indoor and outdoor) are static on the actual clock face display.
Question:	Can you change the volume of the alarm
Answer:	The actual time (based on a real atomic clock) is transmitted from a US government radio station located in Colorado. So when Daylight Saving Time begins or ends, the LaCrosse 616-146 reflects the change as it automatically receives the radio signal.
Question:	Does the face stay lit? Hoping the only light from it would be the projection
Answer:	Hi Crame. The LaCrosse atomic projection alarm model 616-146 that you purchased DOES have a backlight in the form of lighted multicolored digits, just like you can see in the photo. If you use only the batteries for power, the backlight is only available for a few seconds when you push the snooze bar on top of the clock (as is the projected image). However, by using the supplied power supply, both the backlight and the projected image stay on all the time. With the colored digits aglow, the clock information can be clearly seen both day and night from 15-20 feet or more.

Product features

La Crosse Technology 616-1412 Projection Alarm Clock with Indoor Temperature & Humidity

See what time it is on the ceiling or wall without having to get out of bed. Projects time only with adjustable in 90 degree rotation to set projection the way you want it. 12 or 24hr manual set time and displays the room temperature (F/C) and humidity (%RH.) Adjust your view from a calendar date or full weekday display. Also can adjust brightness settings for the backlight. Use included AC adapter to operate, but optional backup requires (not included) 2 AAA batteries.

Adjustable projection with image rotation

• Projects time on wall or ceiling
• Projection arm rotates for proper viewing
• 360° projection image rotation
• Adjustable focus wheel for projected image
• Continuous projection & illuminated backlight using AC power
• Adjustable backlight (HI/MED/LOW/OFF)

Easy-set accessible buttons

• Monitors indoor temperature (°F/°C)
• Monitors indoor humidity (%RH)
• 12/24 Hour time display
• Full weekday view or abbreviated weekday, month, date
• Calendar: Day, Month, Date
• 2 minute crescendo alarm
• 10 minute snooze

Specifications

• Includes 4.5V AC adapter (required) to adjust backlight intensity setting
• Optional 2 AAA alkaline batteries (not included) to back up time and date if power fails
• Batteries only: On-demand 3 second backlight and projection
• Clock: 5.90"L x 2.30"W x 4.40"H

Product description

Full color display gives you current temperatures & humidity, with a future forecast whether it could be sunny or rainy to snowy. Features accurate, self-set atomic time & date with automatic DST updates. Records min/max values and alerts you of extreme temperatures. Also displays your heat index and dew point. Will indicate of low battery and reception strength. Batteries required (not included.).Weather Station Factory Restart Explanation: The factory restart returns the weather station and outdoor sensor to an ?out-of-the-box? default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from outdoor sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the outdoor sensor. 7. Press the TX button on the outdoor sensor to transmit RF signal. 8. Keep the outdoor sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the outdoor sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. For optimum 433MHz transmission, place the outdoor sensor no more than 300 feet (91 meters, open air) from the weather station Explanation: The factory restart returns the weather station and remote sensor to an “out-of-the-box” default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from remote sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the remote sensor. 7. Press the TX button on the remote sensor to transmit RF signal. 8. Keep the remote sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the remote sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. • For optimum 433MHz transmission, place the remote sensor no more than 330 feet (100 meters, open air) from the weather station. Note: In Mounting/Positioning Remote sensor First: Place the remote sensor in the desired shaded location and the weather station in the home. Wait approximately 1 hour before permanently mounting the remote sensor to ensure that there is proper reception. POSITION Outdoor: • Protect the remote sensor from standing rain or snow and from the overhead sun, which can cause it to read incorrectly. • Mounting under an eave or deck rail works well. • If you choose, you can construct a small roof or box for the remote sensor. Be sure a box has vents. • Mount the remote sensor on the North side where to prevent sun from causing incorrect readings. • Mount at least 6 feet in the air for a strong RF (radio frequency) signal. • Do not mount the remote sensor on a metal fence. This significantly reduces the effective range. • Remote sensors are water resistant, not waterproof

• Full color LCD with weather icons: sunny, partly sunny, cloudy, rainy, stormy, snowy
• Atomic self-setting accurate time & date with automatic daylight saving time resets.Outdoor humidity range: 19% to 97% RH. Indoor humidity range: 19% to 97% RH
• Monitors indoor & wireless outdoor temperature (f/c) & humidity (%RH) with recorded min/max values
• Temperature alerts (indoor/outdoor). Display: 5.0V AC adapter for primary power; Requires 3 "AAA" Alkaline batteries for backup (not included)
• Reception & low battery indicators. Indoor humidity range: 19 percentage to 97 percentage RH. Temperatures below - 20°F (-28.8°C) require Lithium batteries in the outdoor sensor.Forecast tendency indicator.Signal strength icon for sensor transmission

User questions & answers

Question:	What wireless protocol and/or frequency does this use? Thanks
Answer:	If you have a hand held radio turned on in the UHF freq. range 420-450 Mhz the transmission of the remote sensor is irritating. Took me awhile to discover where the interference was coming from.
Question:	What are the dimensions of this item
Answer:	As it sets on my table it is 8" wide, 5"hi. Unit is about 1/2" deep, but use of the easel stand will take up more room.
Question:	Whats the difference beyween this unit and the S
Answer:	The S88907 has a humidity range of 1% to 99% RH. It also includes an Indoor comfort range: Too DRY (1-25%), DRY (26-39%), Comfort OK (40-75%), Wet (76-83%), Too Wet (84-99%), and a 300 foot wireless transmission range. The 308-1414B has a humidity range: 19% to 97% RH, and a 200 foot wireless transmission range.
Question:	Does this have variable brightness settings
Answer:	When plugged in it has 3 brightness setting. High, medium, and dimmed. When on battery, it is automatically dimmed, then you click for brightness, then goes back to dim.

Product features

Newentor Weather Stations

• Full color display with adjustable brightness setting
• Wireless indoor & outdoor temperature & humidity, barometric pressure
• Moon phase
• Self setting accurate atomic time
• Weather Forecast
• Calendar
• Customizable alerts

3 Optional Channels Available

Newentor weather stations can be connected to 3 wireless outdoor remote sensors within 200ft in an open area at the same time, monitors the temperature and humidity in 3 places at the same time.

Note: Newentor comes with only 1 wireless remote sensor. Please make sure your indoor weather station is at the same channel with remote sensor.

Indoor Outdoor Thermometer Wireless with WWVB Function and Alarm Clock

Newentor Weather Clocks begin searching WWVB signal( -8 PST、-7 MST、-6 CST、-5 EST) each day at 1:00 AM or after resetting the device.

Note: Please do not put your wireless outside sensor in direct sunlight or rain to affect its accuracy.

Wireless Color Forecast Station

La Crosse Technology introduces a Wireless Color Weather Station with precise, real-time backyard weather. Animated color forecasts with trends react to changing barometric pressure. Monitor in/out temperature trends with high and low alert settings. Measure in/out temperature and humidity with daily min/max records--all on one easy-to-read color display with adjustable brightness.

• Constant Back light (requires included 5v power cord)
• Weather Resistant (not waterproof) transmitting Wireless Temperature/Humidity Sensor
• Transmission range over 330 ft (distance/resistance will reduce signal range)

Color Weather Forecast

Vibrant color LCD with Intelligent weather (allow 3 to 4 weeks for proper calibration) which ensures the most accurate forecasting to your location

• Animated Forecast background icons: sunny, partly sunny, cloudy, rainy, stormy, and snowy
• Displays Indoor temperature (F/C adjustable) and humidity (%RH)
• Indicator icons: temperature & humidity trend arrows, Atomic reception, low battery
• Temperature Alerts for both Indoor & Outdoor
• Indoor Temperature Range: 32 F to 122 F (0 C to 50 C)
• Heat index/Dew Point

Wireless Transmission

• Wireless transmit from over 330 ft range (obstructions, such as: walls, glass and resistance, such as: trees, bushes can reduce range)
• Weather resistance to light moisture, but not direct rainfall and heavy precipitation
• Proper sensor location: Northside of home, Shaded area protected from direct sun/rain but well-ventilated for accuracy
• Wireless Outdoor Temperature Range: -40 F to 140 F (-40 C to 60 C)
• Sensor requires 2 AA batteries (not included)

Self setting Atomic Self-Set Time

• Atomic Self set time & date
• Automatic Daylight savings time resets (on/off option)
• Seven time zone settings (AST, EST, CST, MST, PST, AKT, and HAT)
• Adjustable backlight settings (HI/LOW/OFF) (requires power cord)
• 12/24 hour time display
• Time alarm with 10 minute snooze
• Wall hanging display or base stand
• Included 5V power cord (optional, battery back up requires 3 AAA, not included)

Troubleshooting Tips!

Dashes for Outdoor temp

1) Hold HEAT/DEW button for 3 seconds to search for outdoor sensor. Reception icon will flash while searching/solid when received signal.

2) Weak battery power - check low battery indicator on station. You may change batteries in your sensor, then immediately hold HEAT/DEW to search for signal again!

Weak/Low Power

Low battery next to Indoor Temp = weather station back up batteries are weak/low

1. Continue using power cord, and remove old batteries.
2. Recommend using Brand Name, Standard Alkaline batteries (Exp Date should be 7 years ahead of current year)
3. No action required after

Factory Restart: Remove Residual electrical current

1. DISCONNECT: Remove all power (batteries and AC power cord) from weather station and sensor (bring near station)
2. Press one of the buttons on the weather station at least 20 times to clear all memory
3. Leave both units without power for 15 minutes

Reinstall with Fresh, New Batteries

1. Insert fresh batteries into the outdoor sensor.
2. Insert the AC power cord into the wall outlet then into the weather station.
3. Wait 15 minutes for proper connection between sensor and display before remounting your sensor. (We recommend mounting sensor on Northside of home, protected from direct sunlight and precipitation, but well-ventilated)