13 best rv solar kit

Product description

Renogy 100W Monocrystalline Starter Kit is designed specifically for customers new to solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins - providing many benefits, including, but not limited to, quiet power production and grid independence. This solar kit comes with the tools necessary for a new system: a Renogy 100W 12V Monocrystalline Solar Panel, a 30A PWM Wanderer Charge Controller, a 20ft 10AWG Solar Panel Connectors Adaptor Kit, an 8ft 10AWG Tray Cable, and a set of Z-brackets. Start your solar adventure with a Renogy Starter Kit. Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis. A little extra investment on the right charge controller will generate a much higher return and prevent system failure.

• Includes 100W Solar Panel + 30A PWM Negative ground Charge Controller + Solar Panel Connectors +8Ft 10AWG Tray Cable+ Mounting Z Brackets for RV, Boat
• Monocrystalline solar cell efficiency: 21%；The Charge controller has been upgraded to Renogy new 30A PWM negative ground charge controller The Renogy wanderer
• With the Renogy wanderer 30A PWM charge Controller, you can expand your system up to a maximum of 400W
• Ideal output: 500Wh per day; can fully charge a 50Ah Battery from 50% in 3 hours (depending on the availability of sunlight)
• Negative Grounding controller with battery reversed, overloading, short-circuit and over charging/discharging protection ensures the broader off grid applications and safety. Especially can be used on a vehicle which has battery negative on the chassis. Optimum Operating Current (Imp): 5. 29A
• Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
• Power source type: Solar Powered

User questions & answers

Question:	dimensions of the panel
Answer:	Why is there 4 answers for a physical dimension? The picture shows one, a customer measured his about that, but the spec sheet and seller say a much different number. Please check again.
Question:	Can this kit be upgraded to the better controller
Answer:	this kit CAN BE upgraded, by buying a different brand. the charge controller is junk. it will not charge my battery that is less that 10% drained.
Question:	Looking to get a solar option for charging laptops and small electronics in my van (vandweller). Would this work? or need x
Answer:	this kit will work way beyond that as long as you have enough batteries to hook it up to.it can charge your van battery and run 12 volt appliances through your cigarette lighter or run 120 volt appliances with an inverter that can handle the amount of watts you want to use.be careful of sensitive electronics while using a cheap inverter.you may need a sine wave inverter.i would highly recommend a good group of deep cycle batteries.the more batteries the more you can run.check out youtube for lots of answers.hope I was able to help
Question:	How many amps are charging the battery while inuse, on a sunny day
Answer:	I purchased this system to act as a 'test bed' prior to buying my main dual-axis 2 panel system (Two 250W, 24V 8A panels). It's a monocrystilline 100w panel stated to output 5 amps, 12volts. I see consistent 13~14 volts at 4 amps, and have hit 5 amps on really good days (but 4A are more realistic). As a test item, I had it charging a 73AH Deep Cycle Gel battery from West Marine (the panel came with a 30A PWM charge controller). It worked fine and charged the battery in a matter of short hours ( I have both an amp meter and a volt meter connected to track its output). Previously, I was using two 45W amorphous panels (Harbor Freight) that took up to 4 days to do what this one panel can do in 4 hours. Buy with confidence.

Product features

Description:

The Renogy 100W Solar Power Starter Kit is perfect for new customers wanting to get a start in solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins — providing many benefits, including, but not limited to, quiet power production and grid independence. Adding a polycrystalline or monocrystalline solar panel kit can extend your travels further than ever before.

This solar kit comes with the tools necessary for a new system: One Renogy 100W 12V Poly/ Mono Solar Panel, one 30A PWM Wanderer Charge Controller, one 20ft 10AWG Solar Panel Connectors Adaptor Kit, one 8ft 10AWG Tray Cable, and one set of Z-brackets. Start your solar adventure with a Renogy Starter Kit.

Product description

Weize 2 Pack of 100 Watt 12 Volt Monocrystalline Solar Panel is perfect for any off-grid application.

Spefication:

Maximum Power: 100W (may not always 100 watt output, which depends on the sunshine)

Maximum Power Voltage (Vmp): 18.78V

Maximum Power Current (Imp): 5.32A

Maximum System Voltage: 1000V DC

Open-Circuit Voltage (Voc): 22.64V

Short-Circuit Current (Isc): 5.7A

Dimensions: 36.4*26.8*1.3 inch

Panel Weight: 15.8 lbs



Parcel included:

2 x Solar Panel

1 x 20A Charger Controller

1 Pair Connectors 1 Pair 20ft Extension Wires

2 Set of Mounting Z Brackets



What is needed to get a solar system work? tips below may help you:

- Solar Panel(s), connecting more by series or parallel to get 12v, 24v or even bigger voltage, for your 12v, 24v, 36v... battery.

- Charger Controller, a 10A charger controller is ok for a 12V 100W Solar System; if 200W or Bigger, then 20A or 30A controller.

- Connecting Cables, you need the wires to connect the solar panel, charger controller, battery together.

- Mounting Bracket, you may need them to install the panel in the place with ful sunshine.

- Power Inverter, if you need this to power your AC devices, you still need a power converter to convert the DC to AC power.

• High Efficiency: WEIZE solar panel is constructed with high-performance Monocrystalline solar cells that offer higher efficiency up to 21% than Polycrystalline in bright weather condition, it provides a long service life and is virtually maintenance free.
• Durable: The anodized aluminum frames, tempered glass and sealed junction box make the solar panel corrosion-resistant and weatherproof for superior outdoor performance.
• Versatile: The industrial-standard solar panel features 36.4" x 26.8" x 1.2" size, 2.6ft cable with connectors, produces 300-600Wh a day, generates 5.3 amp power, charges 12 volt battery, ideal for RV's, cabins, sheds, remote locations and other small power generation needs.
• Installation Ready: Equipped with all necessary accessories that include: 1*30A charger controller, 1 pair 20ft extension cables, 1 pair of 8ft battery tray cable, 1 set mount brackets and screws (Battery and inverter are NOT included).
• Warranty: WEIZE 200W solar panel starter kit aims for quality followed up with quality customer service directly provided by manufacturer. A satisfied solution will be given for ANY of your problems. Our support team is on standby for YOU.

User questions & answers

Question:	Will this power a small shed with light and small power tools
Answer:	The solar panel is used to charge a 12 volt deep cycle battery. The battery is then connected to an inverter power supply that converts 12 volts dc to 120 volts ac. The answer to your question is no it will not power the shed by itself. The more batteries you use the more power you can store. One battery and a 1000 watt inverter should power a light and small power tools.
Question:	I need help configuring a run of 40ft from my solar panels to my greenhouse to run air circulating fans. Do I keep the controller and battery close
Answer:	Keep the solar panel controller and Battery as close as possible then run your 40 feet to the fan motor from the battery. You can keep the solar panel up to 20 feet away from the controller with no problem
Question:	Do I need blocking diodes
Answer:	No
Question:	What does the set button do on the controller
Answer:	Turn the USB port on and off also set the voltage at which it will automatically turn off if it goes below a certain voltage that you said like 11 or 12 volts so you don't run the battery down

Product features

What is Needed for a Solar System:

- Solar Panel(s), connecting more by series or parallel to get 12v, 24v or 200w 300w...etc;

- Charger Controller, voltage & current regulator keeping your battery from overcharging.

- Connecting Cables, put the solar panel, charger controller, battery together;

- Mounting Brackets, you may need them to install the panel in full sunshine place.

- Power Inverter (optional), convert the DC to AC power for AC devices.

Perfect Design

MC4 cable, overall length 32.68 inch;

Pre-drille holes, easy for installation;

IP65 rated waterproof junction box.

Good Quality

Advanced material with multi-layered sheet;

Aluminum frame, anti corrosion;

Durable low-iron tempered glass;

High Efficiency

High module conversion efficiency 21%

36.4*26.8*1.3 inch, with Max. 100W;

About produce 300-600Wh / Day.

MC4 Cable

1 Pair of 20ft MC4 Cable

1 Pair of 8ft Tray Cable

Charger Controller

30A PWM Charger Controller

MC4 Connector

1 Pair of MC4 Connectors

Mount Bracket

2 Set of Mounting Brackets

• Output Power: 800Wh daily output depends on the sunlight availability, ideal for RV, Home, Boat, Camper, Caravan, Golf car, Electric car, Yacht, Boat, Tent or backpack etc.
• Solar Panel: Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa)
• Complete solar panel kit with 2pcs 20Ah lithium battery and 1000W solar inverter, easy setting up.
• Widely Use: with 20A LCD charge controller, can expand this kit up to 360W (12V)
• Warranty: 1 Year product warranty, any problems about the product please feel free to contact us

User questions & answers

Question:	Can i use this on a sailboat i am wanting to get more panels to make 550 watts could i do this with this setup? Thank you for your time
Answer:	Hi, you can use this solar panel kit on a sailboat. This solar panel kit come with 20A charge controller that can handle 360W solar panel when 12V. If you need 550 watts solar panel, you can buy this 600W solar panel kit, you can click this link for your reference :(https://www.amazon.com/dp/B079QH61YT). Wish it helps.If you have any problems, pls feel free to contact us through Amazon email.
Question:	Do I need to ground all negative terminals (solar panel, controller, inverter, and battery) to a standard 8ft. grounding rod driven into the Earth
Answer:	Hello, you just need to ground the inverter.
Question:	What plug type is required on the ac output of the inverter? it’s not a standard 110-120vac receptacle
Answer:	Hello, the plug of the inverter is an American universal plug, can be used for American equipment.
Question:	This is where I'm seeing about a Cable."You only need one battery cable, and this solar panel kit includes all cables except the battery cable
Answer:	The seller makes this very confusing in the description. Our order arrived with a battery cable with two ring terminals for the (+) and (-) side of the battery. It's about 10 feet long with Chinese only writing on the jacket with no indication of gauge. However, since you need to wire up the two batteries in parallel, you'll need to cut part of the cable and crimp on your own ring terminals to make the connection between the two batteries. So in a way, yes, you do need a battery cable but only between the two batteries to wire them in parallel and there is plenty of extra with the supplied cable. Hope that helps!

Product features

Package included:

• 2pcs 100W Monocrystalline Solar Panel
• 1pc 20A PWM Charge Controller with 5A USB Port
• 2pcs 20Ah LiFePO4 Lithium Iron Phosphate Battery
• 1pc 1000W 12V DC-110V AC Pure Sine Wave Inverter
• 1 pair of Y Branch Solar Panel Connector（parallel connection）
• 2 set Z Mounting Brackets
• 1 pair of 16.4ft 12AWG Solar Extension Cable
• 1 pc 6.56ft 11AWG Controller-Battery Extension Cable

ECO-WORTHY 100W Solar Panel

• Rated power: 100W
• Open-Circuit Voltage (Voc): 21.6V
• Short circuit current (Isc): 6.13A
• Working current (Iop): 5.78A
• Output Tolerance: ±3%
• Temperature range: -40℃to +80℃
• Size: 39.8*20.1*1.4 inch
• Weight:18.96 pounds

20A PWM Charge Controller with 5A USB Port

• Battery voltage :12V/24V auto
• Charge current: 20A
• Working current: 5.5A
• Usb port: 5V/2A
• Size/Weight: 138*85*30mm /150g
• Can be expanded 300W or 700W Solar System

20Ah LiFePO4 Lithium Iron Phosphate Battery

• Battery Capacity：20AH
• Battery Voltage：12V
• Continuous Charge/ Discharge Current：20A
• Peak Charge/ Discharge Current: 30A
• Maximum Charge Voltage：14.5V
• Discharge Cut-Off Voltage：10V
• perating Temperature: Discharging: -4°F to 140°F
• Battery Size：7.1*6.3*3 inch
• Battery Weight：4.85 lbs

1000W 12V Pure Sine Wave Inverter

• Output Volt: 110V AC
• Continuous Power: 1000W
• Surge Power: 2000W
• Frequency: 60Hz
• Effienvy: >90%
• USB Output:5V
• Fuse: 35A
• Over Load Shut Down: 120W over 10 second
• Over Thermal Protection:shut down the output
• Working Temperature: -10℃~+50℃

• 0.8kWh daily output depends on the sunlight condition, means can full charge a 12V 80Ah battery
• 20A PWM controller with built-in LCD display and dual USB port for mobile device
• Package included: 2 pcs 100W mono solar panel + 2 set of Z style mounting brackets + 20A solar controller + 1 pair of 16.4ft 10 awg solar cables + 1 pair of 2-in-1 connectors
• Easy to install with Z brackets, it can fast mount panels on the roof , each panel comes with 3ft cables for easy hookup
• 1 year warranty with 24/7 technical team, call ECO-WORHTY hotline for a solution

User questions & answers

Question:	CE marking on this product
Answer:	70% real world output is about average output. So you can expect about 11a total output from a 200w panel.
Question:	how many amps does the load connection have. I want to run a 5 amp fan
Answer:	With all solar panels you do not hook the panel directly to the battery you have to have a charge controller. I use mine every day to charge my jump box and batteries for my solar generator. Works very well. I do recommend opening the black box and making sure all you tabs are connected well, before installing.
Question:	Can I pair mor then the 2 solar panels? I want to put a total of
Answer:	In Full sun light it can produce 4-5 amps at about 18-20 volts. Doing the math 4x18=72 watts. I did measure under ideal conditions 20V and about 5A. Doing the math 5x20=100 watts. But But realistically under most conditions the average out put on a give full Sun cloudless day it is more like 4A and 19 volts. 4x19=76watts. Every installation and location is efferent, but this is a rough theoretical estimation. I fireguard on the slightly lower side as dust on the panels and in the air, haze and clouds (often there are high thin clouds that are not easily seen on a bright day). Also remember if you use a charge controller made for solar panels, like I do( Amazon has some $20 dollar ones for small arrays liket I use), The controller will very the charging current as needed to charge the battery. So when you install the panels place them so you get the most Sun Light for the longest time in both summer and winter. The angle of the Sun on the panel can vary greatly if the panel is mounted in a fixed position. This is the easiest mounting method and the most common method. It is less expensive and low maintenance as there are no motors or moving parts. Figure about a 20-23 degree angle of the panel to the Sun as the earth is tilted about that much. This change through the year, but is a good rough guide to start. You may want to do something different at your location. I use two of them and charge two 146 amp hour deep cycle batteries and my panels are not tilted as I live in an apartment and cant mount them like I would like to do. On Sunny days the two panels can take two to four days to fully charge the TWO Batteries depending how much I use the during any given day. But remember my Installation the panels are in a sheltered place and NOT Tilted. So I think if the two panels were mounted like they need to be( As I suggested above) they would work better. Hope this helps. As you can tell it is not a fixed answer as there are many thing that govern the output of the solar panel(s).
Question:	Will this work with an agm battery
Answer:	hello, 47.6(Length) x 21.3(Width) x 1.2(Height) inch is the size for unpacked panel, and 55(L) x 23.3(W) x 1.4(H) inch is packing size. Hope it will solve your problem. Thank you.

Product features

100W Solar Panel

• Rated power: 100W
• Open circuit voltage (Voc): 21.6V
• Max power voltage (Vpm): 17.3V
• Short circuit current (Isc): 6.17A
• Working current (Iop): 5.78A
• Output Tolerance: ±3%
• Temperature range： -40℃ to +80℃

Tell your friends you're using clean power - ECO WORTHY

20A Charge Controller

• New coming with unique and special design
• More details and Wiring Sequence in below

Tell your friends you're using clean power - ECO WORTHY

16.4ft Cables

• 1pc 16.4ft red cable and 1pc 16.4ft black cable with connector
• For extending the cables of panel, and connecting to controller

Tell your friends you're using clean power - ECO WORTHY

Z Mounting Bracket

• 4pcs Z Shape Solar Panel Brackets
• 8pcs Stainless Steel Nuts
• 8pcs Cap Bolts

Tell your friends you're using clean power - ECO WORTHY

2-in-1 connectors

• For connecting 2 solar panels in a series.
• It comes 2 pcs per pack.

Fits Battery Voltage: 12V/24V

• 4-Stage(EQU, Bulk, ABS, Float) charge and PWM charge automatically between solar panel and battery in the solar system.
• For avoiding short circuit, please connect the component as 1.Battery , 2.Solar Panel , 3. Load.

Rated Discharge Current: 20A

• Built-in industrial micro controller.
• Easy to use: Big LCD display, it clearly indicate the status and data, and conveniently switched modes and parameter configuration.
• suitable for home, industrial and commercial etc.

USB Output: 5V/3A

• 2 USB sockets, which support to charge 2 devices simultaneously (Note: power from battery, not from solar panel)

Easy Installation

Reliable

Widely Use

Durable

• 【FOLDABLE AND LIGHTWEIGHT EASY TO CARRY】-- This solar panel photovoltaic packs 300W of power yet is only 0.9inch thick,Foldable Dimension 41x22inch and weighs 17lb, making it easier to mount,transport, hang, and remove.
• 【POWERFUL HIGH CONVERSION EFFICIENCY】with high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is smaller than a traditional model.Maximizes system output by reducing mismatch loss
• 【FOLDS FLAT AND EASY TO STORE】-- The panel is well protected in a thick fabric pocket sewn. A practical carrying handle is available easy to carry and use and with, Ideal to use for cars,roofing,motorcycles,boats,snowmobiles,tractorscamping, camping, climbing, hiking, picnic, charging your car battery, or in emergencies，shine a light on your shed
• 【FREE SOLAR CONTROLLER for you 】-- Solar charger for all 12V batteries ,with its 18V optimum power voltage.Protection against: overcharging, overload, short-circuit
• 【AMAZON LOCAL WAREHOUSE FAST DELIVERY+ INTIMATE AFTER-SALES SERVICE】-- Amazon FBA delivery, Receive goods in time，any questions you can contact us at any time, we will do our best to provide you with a satisfactory solution to ensure that you will not suffer any loss

User questions & answers

Question:	Can four of the 300 W panels be connects to give 1200 W power
Answer:	I dont know 2 of them didnt work for beans
Question:	Is it plug compatible with any portable generators
Answer:	The panels are connected to the controller with SAE (2 flat). If you are looking to directly connect them to a portable generator, you will need to purchase an adaptor.
Question:	Can i charge lithium batteries
Answer:	Yes. Mine puts out about 15 amps max
Question:	Can this be connected directly to a solar generator
Answer:	The panels are connected to the controller with SAE (2 flat). If you are looking to directly connect them to a portable generator, you will need to purchase an adaptor.

Product features

Easy To Carry,Store and Put Up

Easy To Install---COMPLETE KIT, you really don't need anything else to charge your battery

High Efficiency

300W solar cell is made from more solid material of good quality, up to 23% efficiency, providing endless joice for laptop and other battery under sun.

Waterproof & Durable

Adopting water-resistant and durable nylon material, it can be used in light rain and light snow, it can be used when traveling, camping, outings, earthquakes, disasters, etc

What you GET!

1*DOKIO 300W solar panel

1*DOKIO Waterproof Bag

1*DOKIO 20A controller

3*Cable

5*DC

Product description

The Renogy 400W 12V Premium Kit is the most economical choice for the off-grid adventurer. With the ability to access energy wherever there is the sun, the options for your journey are limitless. The Rover Li 40A MPPT Charge Controller included in this kit features multi-phase synchronous rectification and Maximum Power Point Tracking technologies, which increase charging efficiency. This kit includes the new 100W Mono Solar Panel which is not only sleek in size, weight, and color but is made of the highest efficiency solar cells that Renogy has to offer. Our new Bluetooth module is also included which can be paired to the Renogy DC Home APP. The Renogy DC Home APP allows users to remotely monitor and change their photovoltaic system's parameters with a few simple swipes on their smartphone or tablet. For convenience, this kit also consists of four sets of mounting Z-Brackets, one 20ft 10AWG Solar Adaptor Kit, one 8ft 8AWG Tray Cable, fusing components for your controller and battery. This Premium Kit is perfect for installation on an RV, boat, or camper. It can also be installed in a ground mount system next to an off-grid campsite, making it an ideal choice for many off-grid applications.

• Designed for off-grid solar panel system, caravan, RV, boat, Green house solar panel system. Cell efficiency: Regular Monocrystalline: 21%
• Sleek design and a durable frame, the Renogy Premium 100 Watt 12 Volt Monocrystalline Panel provides you with the highest efficiency per area and is the perfect item for off-grid applications.
• Rover charge controller brings peak conversion efficiency of 98%, high Tracking efficiency of 99%; 4-Stage battery charging process for a rapid, efficient, and safe battery charging
• IP65 rated junction box provides complete protection against environmental particles and low pressure water jets
• Pre-drilled holes on the back of the panel allow for fast mounting and securing, Comes equipped with an Waterproof In-line fuse and ANL fuse components for protecting your charge controller and battery
• Power source type: Solar Powered

User questions & answers

Question:	Can this 400w 40a system be safely plugged into an rv solar ready 10a outside connection
Answer:	The "40 amps" is just the maximum that the controller can provide to the batteries. With this kit, you'll never get close to that number, even if you wired all four panels in parallel (which I wouldn't do). If you wire all four panels in series, as you should do, then a 10-amp connection will be fine.
Question:	Is it ok to hook up the solar panels to my batteries and charge them at the same my time my rv is charging them
Answer:	Yes, the Renogy 400 Watt Kit can charge the batteries by the included Renogy Charge Controller and at the same time the RV can charge the batteries with the Renogy DC to DC charge controller when there is no sun light on the panels.
Question:	Can this power an ac and refrigerator on a class a motorhome
Answer:	It would depend on your battery bank and inverter. Not so much the solar kit. How large of a ac and fridge and how often will they be ran? For me I run my fridge on propane. I try not to run the ac to much. For some basic info, I have 4 12v 100 ah agm in parallel. This gives me 800 ah. I run a couple of essentials 24/7. They do not exceed 1.8 amps. Ever. By batteries charge Fully off this system almost daily. They battery bank never never drops below 12.4 volts. I can run a 1500 watt fridge or ac about 5.5 hours. I’d you know the wattage of your appliances apply the following: Usage Hours = AH/(wattage/0.85/volts)
Question:	What other equipment will I need to add more solar panels and what is the max wattage for this charge controller
Answer:	this is a great start solar package. this is what i had. Rover 40Amp will allow approx. 6-7 100 watt solar panel. Each 100 watt solar panel at max will produce around 5 amps. So 6x5=30 amps; 7x5=35 amps, so these numbers of solar panels will NOT exceed or damage the Rover 40A (amp) MPPT solar charger. if you plan on expanding your solar array, buy more brackets and wiring (especially if you are doing parallel wiring) and more quality batteries (rec AGM or Lithium ion); buy Will Prose IV book on amazon! great resource.

Product features

Renogy Premium Kit

The Renogy 400W 12V Premium Kit is the most economical choice for the off-grid adventurer. With the ability to access energy wherever there is the sun, the options for your journey are limitless. The Rover Li 40A MPPT Charge Controller included in this kit features multi-phase synchronous rectification and Maximum Power Point Tracking technologies, which increase charging efficiency.

This kit includes the new 100W Mono Solar Panel which is not only sleek in size, weight, and color but is made of the highest efficiency solar cells that Renogy has to offer. Our new Bluetooth module is also included which can be paired to the Renogy DC Home APP. The Renogy DC Home APP allows users to remotely monitor and change their photovoltaic system's parameters with a few simple swipes on their smartphone or tablet. For convenience, this kit also consists of four sets of mounting Z-Brackets, one 20ft 10AWG Solar Adaptor Kit, one 8ft 8AWG Tray Cable, fusing components for your controller and battery.

Product description

If you're looking for a convenient and portable power solution, the Renogy 100W Monocrystaline Foldable Solar Suitcase is an ideal choice. The Renogy 100 Watt 12 Volt Monocrystalline Portable Solar Suitcase is an entire solar power system incorporated into one small package. Weighing in at about 26.60 lbs., this lightweight suitcase includes two 50 Watt Monocrystalline Solar Panels, one 20 Amp waterproof Voyager Charge Controller with an LCD Screen for power regulation, one 10ft tray cable with alligator clips for easy connection to the battery, and a protective casing for safe portability. The Renogy 100 Watt Solar Suitcase will make charging on the go as easy as 1-2-3! If you have any questions regarding this product, please call us at 1 (800) 330-8678 or email [email protected] Efficiency : 21.0%

• Adjustable, Corrosion-Resistant aluminum stand as well as a heavy duty handle and latches for longevity. Folded size: 19. 9 x 27. 2 x 2. 8 inches. Ideal output: 500 Watt hours per day (depends on sunlight availability)
• Compatible with gel, sealed, Lithium, and flooded batteries. Charge controller with LCD display for displaying operating Information and data
• 20A built-in 5-stage Solar charge controller provides overcharge protection, reducing Fire risk.Operating Temperature: -40°F to +185°F
• Negative-ground charge controller for compatibility with your RV, boat, trailer, etc.
• The low-voltage system avoids electric shock hazards

User questions & answers

Question:	My house battery is too hard to get to for alligator clips. What would I need to hard wire this system to my battery
Answer:	I got this extension cable: https://www.amazon.com/Go-Power-GP-PSK-X30-Expansion-Accessory/dp/B00FYV4DU8 And I got this accessory: https://www.amazon.com/Go-Power-Trailer-Accessory-Portable/dp/B00FYUCQXK, to which I added the appropriate quick-connector. The 30’ cable coils up inside the back of one panel when folded, I keep the 7-way hookup accessory in a little bag with other accessories. I simply set up the panel somewhere within 30’ of the front of my trailer and plug it into the 7-way coming from the trailer. Works like a dream to keep my LiFePO4 battery charged up, even on less than perfectly sunny days! No need to alligator-clip it to battery under the couch in my trailer. I did get a charge controller from Zamp Solar, because Renogy’s did not support lithium batteries at the time.
Question:	Can i add more pannesls
Answer:	I assume you are asking if the included charge controller can manage additional panels? If you are looking to add panels in parallel (maintaining the nominal 12V output while increasing amperage), my answer would be, "not recommended." This controller is rated at 10 amps. At full 100 watt output, it is operating at around 7 amps, so there's not much additional capacity. If you plan to add panels, I would suggest ordering the kit without the controller, then add a higher capacity controller such as this 30 amp model...http://www.amazon.com/RENOGY%C2%AE-ViewStar-Negative-grounded-Controller/dp/B00LG0DAQO/ref=sr_1_2?s=lawn-garden&ie=UTF8&qid=1428654662&sr=1-2&keywords=viewstar It will require some know-how and additional wiring to properly set up.
Question:	Anybody know how long you can run the batter/power cable...? I'm thinking from the top of an RV to the ground +/- 12-15'. Thank you in advance
Answer:	With 10AWG wire between your controller and battery, 30' of wire will give you 3% drop. Only 15' of wire could be used if you add a panel and have 200W of PV power. That's not the best practice though. Best would be to use an MPPT controller connected as close to the battery as possible. You would then be able to use 55' of 10 guage wire between the controller and panel, or 110' if you double your voltage by adding another 100 watt panel in series.
Question:	What is a good extension cord to buy with this for more mobility from my RV
Answer:	There is a lot of wrong and misleading info you're getting here... It primarily depends on your controller. If you have a garbage (PWM) controller, then 25' of 10AWG wire is your max. That puts you at 3% voltage drop. If you have an MPPT controller, you can go 55' with 10AWG wire. Now, here's the kicker, and the reason nobody should be buying these crappy PWM controllers; If you add another 100W panel in series to your MPPT controller, you can now use 110 feet of wire, and your voltage drop will still be 3% because you're doubling your voltage. If you add a panel to a PWM controller, you'll have to cut your wire length in half. DO NOT BUY PWM controllers!!!

Product features

Solar Suitcase

The Renogy 100 Watt 12 Volt Monocrystalline Portable Solar Suitcase is an entire solar power system incorporated into one small package. This suitcase includes two fully waterproof(IP66) 50 Watt Monocrystalline Solar Panels, one 20 Amp waterproof Voyager Charge Controller, one tray cable with alligator clips for easy connection to the battery, and a protective casing for safe portability.

The negative-ground charge controller is compatible with RV, boat, trailer, etc.

Package Includes

• Composed with two 50 Watt Monocrystalline Solar Panels. The low-voltage system avoids electrical shock hazards.

• Adjustable, corrosion-resistant aluminum stand.

• Heavy duty handle and latches for longevity protective casing.

Package Includes

• 12V/ 24V Battery compatibility with auto recognition
• Smart 4 stage PWM charge Controller: bulk, Absorption. Float, and equalization.
• 4 Battery Type compatible – sealed/AGM, gel, Flooded, and lithium batteries (with Lithium awakening feature)
• Watertight design with backlit LCD display for system information and error codes.
• Multiple Protection features for battery, controller, and Solar panels (including reverse polarity and more)

Package Includes

MC4 to Alligator Clips w/ Fuse

Used for connecting the charge controller to the battery.

The entire cable from the charge controller to the alligator clips measures 9.9 feet with an inline fuse of 10A.

• Handcrafted in the USA; 25-year output warranty; Easy installation; Best-in-class solar cells
• Charges most types of 12-volt batteries, including lithium; Expandable up to 510 watts
• Digital 5-Stage, PWM 30-amp charge controller monitors and protects your battery(ies) and panel(s)
• Includes: 170-watt panel, 30-amp charge controller, wiring harness, 3-port roof cap, mounting feet
• Panel Dimensions: 58.3 inches x 26.4 inches x 1.5 inches

User questions & answers

Question:	Could I integrate my portable 230 watt solar panel with this kit, if I installed all of them on the roof of my trailer
Answer:	Yes. You could but it doesn't really make a ton of sense. The portable panel will already have a charge controller and that will not work well with the roof kit controller.

Product features

Benefits of Zamp Roof Mount Kits:

Made in the USA:

Our panels are handcrafted in Bend, Oregon using the finest materials available (locally sourced whenever possible.) They are built to last 25 years or more and every panel is signed by the person who made it and tested it.

So instead of saving a few bucks now and buying a new solar kit every couple of years, invest once and charge with confidence for the next couple of decades.

Complete Kits:

Our roof mount kits come with everything you need to connect your solar panel(s) to your battery(ies) and start charging. Roof mount solar kits include:

• A 5-stage PWM charge controller
• Pre-assembled wiring harness
• 1 - 3 port roof cap (ready for future expansions!)
• Mounting feet and hardware

Expansion Panels:

Our roof mount expansion panels are for people who want to add more power to their kit. Expansion panels only come with the panel, mounting feet, and a wire to connect the new panel to your solar charging system.

Simple Installation

Our kits come with a pre-assembled wiring harness that doesn’t require crimping tools, making installation easy and simple.

Easy-Release Mounting Feet

If you need to remove your panel for maintenance or safe storage, our easy-release mounting feet let you quickly unclip your panel without removing the hardware itself.

Omni-Mount Rail System

Our innovative Omni-Mount frame lets you mount the panels wherever you need them and our stainless steel mounting hardware ensures your panels stay secure.

Protects and Monitors

The digital 5-stage, PWM charge controller protects your system from overcharging and lets you monitor your power by providing real time updates of volts, amps, and amp hours.

• 5PCS ACOPOWER 100-Watt polycrystalline solar panels can be connected in parallel by branch connectors or connected in series without any connectors;
• MPPT Technology: Common negative grounding design. Automatically detect 12V or 24V DC system voltages innovative mppt technology with High tracking efficiency up to 99.5% and Peak. Conversion efficiency of 98%.Common Negative grounding design.
• MPPT Solar Charge Controller has user adjustable settings! Easy Monitor and Operate: Multi-function LCD displays system information intuitively. User programmable for battery types, load control etc, via PC software or remote meter MT-50. Compatible with lead acid, AGM, gel, and lithium batteries.
• Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging.
• 25-year transferable power output warranty on panels and 1-year warranty on rest of the kit components

User questions & answers

Question:	will this system work well with two 12 volt 250ah deep cycle lead acid batteries powering 3000watt inverter for a small fridge/freezer and some LEDs
Answer:	12 volt for me. Batterys are 12 volt and lighting is all 12 volt in the trailer.
Question:	Why this product will not ship to puerto rico anymore? i bought one of this and will like another. people say i cannot connect 2 different panels
Answer:	you can ,but must
Question:	Do you have any technical details on the rs485 modbus communication for the 30a mmpt controller
Answer:	You may want to contact the seller directly.
Question:	How does one determine how many watts amps they need? I am trying to go solar instead ofa 6500 watt generator. How do i determine how many kits and ba
Answer:	Watt hours is the measure to determine this. Add up the total watts desired for the entire time you want power provided. Divide the answer by the watt hours storage. Yes, this is simplified.

Product features

ACOPOWER 500W Solar Panel Kit | MPPT Charge Controller

• Solar Module: 5PCS 100W Polycrystalline
• MPPT Charge Controller: 40A MPPT charge controller
• Cables: 1 pair 30ft 12AWG cable with PV connector to connect to the charge controller, 1pair 8FT 8AWG Tray Cable to connect the charge controller to your battery;
• Mounts and cable Entry housing: Five set of z-brackets and a waterproof cable Entry housing
• 4 Pair PV T/Y Connectors

How to properly set up a basic system

First, the battery should be hooked up to the charge controller. You could use our tray cable or any general stranded copper core wire to connect the two. Make sure that you lead the wire into the battery terminal of the charge controller and match the + and – to the battery + and -. Make sure to screw in the exposed wire tightly inside the controller terminal. Then screw on the battery rings to the battery.

Second, then connect your solar panel to your charge controller. We recommend that you connect the adapter kit to your panel first, then follow the + or – sign coming off of the leads of the panels and match it with the + and – sign on the charge controller. Be careful at this step, because if the panel is inserted incorrectly, you can have reverse polarity and short the system causing damage to the panels or controllers.

Lastly, you can hook up your inverter to your battery by using battery ring cables and by matching the + to + and – to -.

100W Mono Solar Panel

Specification

• Peak Power (Pmax):100W
• Peak Circuit Voltage(Voc):22V
• Max Power Voltage(Vmp):17.48V
• Short Circuit Current(Isc): 6.21A
• Max Power Current(Imp):5.72A
• Wind resistance:2400pa
• Weight:20.94 lb
• Dimension: 40.2*26.4*1.4 Inch
• Application Class:Class A

40A MPPT Charge Controller

1. 12 / 24VDC automatically identifying system voltage
2. Rated charge current: 40A
3. Max Input Power: 520W/12V 1040W/24V
4. Max.PV open circuit voltage:100VDC (92V at 25℃ temperature)
5. Battery type selection: lead-acid (Gel, Sealed, Flooded) and Lithium
6. Negative Grounding Design
7. Installion Notes：First connect the battery；Then connect the load; Finally connect the solar panel.

Z Brackets

5 Sets Mounting Z Brackets

Cables and Housing

1 Pair 30ft 12AWG PV Cable with female/male connector

1 Pair 8FT 8AWG Tray Cable

A waterproof cable Entry housing

4 Pairs PV T/Y Connectors

Product description

The RICH SOLAR 200W Solar Power Starter Kit is perfect for new customers wanting to get a start in solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins — providing many benefits, including, but not limited to, quiet power production and grid independence. Adding a monocrystalline solar panel kit can extend your travels further than ever before.

• Includes: 2 x 100W Monocrystalline Solar Panel + 30A PWM Charge Controller + 2 x 20' 10AWG Wire from Solar Panel to Controller + 2 x 10' 10AWG Cable from Controller to Battery + 2 x Mounting Hardware Z Brackets+1 x Parallel Connectors
• This kit offers enough power to charge most single or dual 12 volt battery banks. Power your RV, boat or trailer with 200 watt, or expand it up to 400 watt for larger rigs and equipment.
• With the highest grade monocrystalline solar cells for optimal output, our 2 x 100 watt panel is treated with anti-reflective coating to maximize light absorption.
• Installation is a breeze with our pre-assembled wiring harness that doesn’t require crimping tools. Since all of our products are compatible with each other, makes expansions, upgrades or additions simple and easy… just plug in and go!
• 25-Year Output Warranty, buy with confidence knowing that your solar investment will last for the long-haul.

User questions & answers

Question:	If I only want to use one deep cell battery, what Ah would you recommend? For a gable fan and lighting
Answer:	It should with no problem. It comes with all of the mounting hardware, so as long as you have about 2'x4' of roof space, as most class C's do, you shouldn't have a problem.
Question:	What shipping method/company do you use for this kit
Answer:	Thank you for the question! The max output on the load terminal will be 10a. Thank you, M.S.
Question:	Does this kit have an upgrade for an mppt controller
Answer:	As others have said, you would need an appropriate sized battery based on the wattage of the light set. You don't say what type of lights you are running other than that they are LED. I run a set of LED lights along the top of my van (set of 50 feet, holiday lights). The string is made with a DC plug. So I do not need an inverter. Plugs into the DC female connector on my solar set up. If your lights have an AC plug, you will need the inverter.
Question:	Does the charge controller have different charge profiles for different battery types
Answer:	It does not curve. It has an aluminum frame. I mounted mine to the roof rack of my econoline...very very sturdy but no curve

Product features

200 Watts 12 Volts Monocrystalline Solar Kit

Our most popular kit! For a quieter, more peaceful outdoor experience, replace your generator with our 200 watt solar kit. This kit offers enough power to charge most single or dual 12 volt battery banks. Power your RV, boat or trailer with 200 watt, or expand it up to 400 watt for larger rigs and equipment.

Product description

Taking a trip in your RV can create lifetime memories. Don't let traditional gas powered generators or power hookups slow you down. Unlike traditional gas generators, Renogy 200W Watt 12 Volt Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup. Renogy RV Kits are carefully arranged to meet your RV needs. This kit includes two 100W 12V Monocrystalline Solar Panels, an Adventurer 30A PWM Charge Controller, a 30 ft 10AWG MC4 Adapter Kit, a 16 ft 10 AWG Tray Cable, a pair of Branch Connectors, and two sets of Z Brackets for mounting. Open-Circuit Voltage (Voc) - 21.6V

• Designed for off-grid solar panel system, Caravan, RV, boat, Green house Solar panel system. Mono-crystalline Solar Cell efficiency: 21%
• Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades as well as withstand high winds (2400PA) and snow loads (5400PA)
• This kit includes our adventurer 30A PWM flush mount charge controller can charge the Battery quickly and safely under almost any condition
• Order will be delivered in multiple packages; bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. Short-Circuit Current (Isc)-6.24A
• Complete kit includes: 2 pc Renogy 100 watt 12 volt Mono-crystalline Solar panel adventurer Li 30A PWM flush mount charge controller one 30Ft 10AWG MC4 adaptor kit one 16Ft 10AWG tray cable one pair of branch connectors a bt-1 Bluetooth module one Renogy cable entry housing

User questions & answers

Question:	Can I use the charge controller in this kitt for 800 watts
Answer:	Hi, thanks for your question. The LED light can be last about 8-10 hours after fully charged. There's a on/off button on the switch box and you can choose to turn it ON or OFF manually.
Question:	What are the dimensions of your 100 watt panel
Answer:	I think it would work for anything - it’s basically just a strip of LED’s with a solar powered source attached to it. We put ours on a regular basketball hoop however, and it broke in the middle of the strip. The company exchanged it for a new one though.
Question:	Would you recommend this set for full time rv living
Answer:	I just received this product and see that there is no sensor box in the package. The seller answers this question and states that there is not a sensor light and it does not come with a senor box, but the product clearly states that it has a sensor box. I am posting below the exact verbage included in the package I received. In 5 different places it mentions the sensor box. In the description, the features and in installation instructions. the description of the product says "LED Basket Hoop Solar Light Basketball Hoop Sensor-Activated LED Solar Strip LIght. Sensor Activated means that a sensor should be incuded with this product. In the Manual it says Features 1. LED Basketball Hoop LIghts-It lights up the rim of your basketball hoop every time you score, with up to one hundred unique light patterns. 2. Glowin-the-Dark Basketball Rim - This is the world's very first sensor activated LED strip designed to attached to any basketball hoop. 4. Unique Basketball Entertainment Product - It accurately provides exciting and vibrant instant-feedback to players when they score a basket. 5. Velcro the sensor box underneathe the rim (which will detect your baskets made) in the manual under "How to Install" it says to velcro the senor box underneath the rim If the sensor box is important to you, buy another product. I would not buy again from a seller who misrepresents their products.
Question:	Could this be used for home use such as running fans and maybe a fridge during a hurricane or blackout? Also how easy is it install
Answer:	The hook and loop is refering to the velcro included to secure the power box (battery panel)

Product description

Our company has an experienced professional technical team to help customers solve various solar charging problems, so that we can use pollution-free solar energy. That batteries will slowly leak after being stored for a period of time. And it will consume power for a long time, which will make the battery unchargable. Therefore, we can use our solar charger to charge and maintain the battery.



This product has the following characteristics:



1. Using high-efficiency monocrystalline solar cells, even if the panel is smaller than the traditional model, it still can achieve higher power efficiency.

2. Equipped with a charging controller, it has various protection functions that never cause any damage to the battery.

3. It is convenient to charge as long as there is sunlight to charge the battery.

4. Easy to connect. No need to pull long and complicated extension cords. At the same time it works under human body safety voltage and is very safe.

5. The surface is made of glass and easy to clean.



Reminder:



1. Before connecting the wires, separate the red and black clips to avoid collision and short circuit.

2. This product is a solar charging board which should be installed in a place where the sun is shining directly. The more sunlight, the better the charging effect.



Specification:



Solar Panel Type: Monocrystalline

Maximum Wattage: up to 100 watts

Current at max: 5.3A

Open Circuit Voltage: 22.5V

Operating Voltage: 12V

Size: 41.7*21.3*1.2 inch

Weight: 16.1 lbs



Packing list:



1x solar panel

1x alligator clip

1x waterproof controller

1xSAE cable

4 x Z-shaped solar panel aluminum alloy bracket

8 x long cap bolt with rubber washer

4 x short bolt

4 x nut

4 x spring washer

4 x flat washer

• 【Outstanding Quality】100W solar panel adopts well-built monocrystalline cells with high conversion efficiency up to 24%. Using Tempered glass, weatherproof film and plus aluminum frame for excellent extended outdoor use.
• 【Easy Installation】There are 4 mounting holes on the back. The Z bracket mounts that come with the product can easily install the solar panel on the wall and the roof without any extra maintenance.
• 【Controller】Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.
• 【Multifunctional】When camping or traveling with family, it can be used in RV, car, boat, camper, jet ski, caravan, water pump, shed, etc.
• 【Warranty】25-year transferable power output; 5-year material and workmanship; 7*24h technical service support.

User questions & answers

Question:	What battery can I use? A 12-volt
Answer:	Keep the solar panel controller and Battery as close as possible then run your 40 feet to the fan motor from the battery. You can keep the solar panel up to 20 feet away from the controller with no problem
Question:	Is the solar panel connection universal
Answer:	No
Question:	Is this charge controller waterproof
Answer:	Turn the USB port on and off also set the voltage at which it will automatically turn off if it goes below a certain voltage that you said like 11 or 12 volts so you don't run the battery down
Question:	Can i hace two 100w panels on this controller
Answer:	The solar panel is used to charge a 12 volt deep cycle battery. The battery is then connected to an inverter power supply that converts 12 volts dc to 120 volts ac. The answer to your question is no it will not power the shed by itself. The more batteries you use the more power you can store. One battery and a 1000 watt inverter should power a light and small power tools.

Product features

Specification

Maximum Power: 100W

Maximum Power Current: 5.3A

Maximum Power Voltage:18.9V

Operating Voltage: 12V

Open Circuit Voltage: 22.5V

Short Circuit Current: 5.7A

Weight: 16.1lb

Dimensions: 41.7*21.3*1.2 inch

Solar Panel Type: Mono-crystalline

High Efficient Cells

Topping mono-crystalline solar cells with high transmission delivered high efficiency for modules. The conversion rate can reach up to 24% under Standard Test Condition.

Junction Box

High sealing junction box. It can effectively block water droplets and water vapor from outside. Even if soaked in water, the internal components will not be any damage.

Waterproof controller

Improved Waterproof Controller, higher charging efficiency, with enhanced reverse connection protection, load overload protection, temperature control and other functions.

Waterproof Structure

Great waterproof performance. Tempered glass brings excellent waterproof protection for the panel. Anodized aluminum frame of good insulation and corrosion resistance let you leave it outdoors for decades without worries.

Product description

The Windy Nation 100 Watt Complete Solar Charging Kit allows you to start producing free, clean power from the sun! Perfect for RV's, boats, cabins and back-up power! WindyNation's 100 Watt Solar Kit includes what you need to get started: (1pc) 100 Watt Solar Panel, User Adjustable LCD 30-Amp Solar Charge Controller with Battery Temperature Sensor, 40 ft of UL Listed 12 AWG Solar Cable, all necessary Connectors for wiring, and all the necessary mounting hardware (4 Solar Panel Mounting Brackets and Fastener Sets). Product photos above show individual pictures of all the included items and additional technical information. Add a 12 volt battery and a DC-to-AC inverter and you are ready to harness the sun's free energy. The WindyNation 100 Watt Solar Charging Kit is the ideal solution for providing back-up power or off-grid power when you need it! This Kit includes our premium grade PWM solar charge controller with digital display. The digital display provides detailed system information including solar panel charging amperage, battery voltage, battery temperature, amperage of load draw (if a load is connected), solar generated amp-hours to battery, etc. See Image in Photo Gallery above for an image of all LCD readouts. System settings like voltage of solar disconnect, voltage of load disconnect, etc are user adjustable using the MODE and UP and DOWN buttons on the charge controller.

• The kit includes: 100 Watt WindyNation Solar Panel, 30-Amp (user adjustable) WindyNation P30L LCD Display Solar Charge Controller with Battery Temperature Sensor, 40 feet of UL Listed 12 AWG Solar Cable, all necessary Connectors, solar panel mounting hardware and Installation Manual.
• Designed for RVs, cabins, homes, boats, back-up and remote power use
• Kit will provide on average 350 Watt Hours (Wh) or 33 Amp hours of charge per day (depends on sunlight availability). Add more solar panels in the future! The included charge controller can handle up to 4pcs 100W solar panels (12 volt system) and 8pcs 100W solar panels (24 volt system)
• 100 Watt solar charging kit provides up to 100 watts of clean, free, renewable power
• PWM Solar Charge Controller has user adjustable settings! LCD Screen shows system amperage, voltage, amp-hours, temperature and DC load draw. See Image in photo gallery for all LCD Screen readouts.

User questions & answers

Question:	Is this 100w panel mono or polycrystaline
Answer:	Polycrystaline
Question:	how do you attach a 4-8gauge wire from the controller to the battery. The connection screws look very small on the controller
Answer:	Attach the wires before you mount the controller.
Question:	Not mechanically inclined beyond reading good directions. i want a solar kit to run a small fan, or recharge phone or computer. what do i need
Answer:	This is not the unit for you as you would need to add a battery and inverter to do what you want to. There are several smaller kits out there that include a small battery pack and inverter in one. Most of these kits produce 12V dc power and you are looking for 115V ac power for your devices, that is why you need the inverter unless you find a 12v fan and use a car charger for your phone. You would still have to add a battery to store the power. Good luck and Merry Christmas.
Question:	Will this unit protect itself when the camper is hooked up to AC power? Will it also protect itself when the camper is plugged into a pickup
Answer:	The solar system will be connected in parallel to the battery bank and whatever charger is also connected to the battery. If the shore power is charging the battery, there is no issue but if the shore power is powering the camper, a transfer switch should be installed