13 best heat resistant hoses

Product description

A premium rubber hose that can take the heat up to 180 degrees. Can be used for hot and cold water applications. Sometimes the right hose is all you need to get the heavy work done. Available in multiple sizes, our Apex USA made hoses are always engineered with you in mind.

From the Manufacturer

Commercial Rubber Water Hose - All Rubber Tough - Hot Water Hose up to 180 degrees. 5/8" x 25'

• Designed to Take the Heat
• All rubber construction for hot (180°) or cold water use
• Rigid sleeve prevents kinking at the faucet
• Leak proof and crush resistant couplings
• Reinforced construction for durability
• Made in USA with lifetime guarantee

User questions & answers

Question:	Apex brags about hot water usage, how about 40 degrees or less, will it stiffen and break like all other hoses
Answer:	The main hoses we presently sell are the 25ft, 50ft, 75ft and 100ft Black Green garden hoses with nozzle - these are great hoses well liked by Buyers and is the same is this 50ft garden hose without a nozzle. We also sell a 50 ft Black hose with a nozzle. All our hoses are best in class and among the strongest expandable garden hoses available. We will be selling nozzles separately in the near future - the inventory is expected to be available in early January 2021.
Question:	does this kink
Answer:	Yes - the hose connector can be connected to most sprayer nozzles available in the United States, as long as the sprayer has US standard threads, and has the same diameter. The male connector of this hose has an on/off valve, so the hose also can be used without a hose nozzle. We will be selling sprayer nozzles separately in January 2021 - they will be best in class garden nozzles.
Question:	Is this hose safe to hook to a camper for drinking water
Answer:	We do not sell 1 inch garden hoses. Our hoses have fittings or connectors which fit all standard US garden spigots or faucets. Hope you are able to find a suitable one.
Question:	made in china
Answer:	The inside diameter of the inner hose latex pipe is 6mm. Its thickness is the highest among expandable garden hoses. The inner hose is multi layer and is made of latex material of the highest quality. When the faucet or spigot is turned on, this inner hose pipe expands to about 3/4 inch as water pressure builds up - as this inner latex pipe is thicker, it needs water pressure of about 4 bar for it to expand fully. The water then goes through a small tube in the male connector of about 6mm before it is discharged through a sprayer (if a sprayer is connected) - this is a common feature of all expandable garden hoses. This feature, while restricting the amount of water discharged, allows beautiful water spray patterns to emerge. The main benefit is that the strength of the water will not cause the soil in a pot of garden plants or flowers to splash everywhere. At the same time, depending on the spray pattern selected, the sprays would be strong enough for most gardening purposes, the washing of pets, washing a car, gardening or washing the patio or a driveway. Many of our Buyers have said this hose is great and many have said this is highest quality hose they have purchased.

Product features

Premium rubber hose

Teknor Apex has been developing new technologies and innovations that change the marketplace since 1924. Our consumer lines of garden and industrial hoses have been so groundbreaking because, at our core, we are a diversified material science company.

All rubber construction for hot (180°) or cold water use

For hot (180°) or cold water use.

Rigid sleeve prevents kinking at faucet.

Leak-proof, SealFast couplings.

Engineered with you in mind

Reinforced construction for durability.

Made in the USA

Proudly Made in the USA. Engineered with you in mind.

Apex 8695 industrial Duty All Rubber Hot Water Hose

This hose is 5/8 inch Diameter and available in 25 and 50 Foot lengths.

A premium rubber hose that can take the heat up to 180 degrees. Can be used for hot and cold water applications. Sometimes the right hose is all you need to get the heavy work done. Available in multiple sizes.

• Metal garden hose, made of the 304 stainless steel, It will not break, crack or leak, come with the 10 ways spray nozzle,
• 50ft flexible metal garden hose. non-kinking and tangle, lightweight, wear resistance and corrosion resistance,
• High quality 10 ways spray nozzle, SHOWER, CONE, JET, SOAKER, ANGLE, MIST,1/2VERT, CENTER, FULL, FLAT.
• Rubber gasket on each end for a tight seal to prevent the hose from leaking.
• Guarantee: 12 Months warranty for manufacturing defects, Any questions please feel free to contact us

User questions & answers

Question:	Where is this hose made
Answer:	I did not get the nozzle and the sprayer leaks. The hose I like though. I am trying to resolve with seller. They want a picture. I ask how do I send a picture of the part I didn't get?
Question:	Can this hose be hooked to a indoor sink
Answer:	I have a hose reel and 100ft hose works fine
Question:	Does it come with 2 nozzles, the fireman’s nozzle as well as the 10 way spray nozzle? The ad is not quite clear to me
Answer:	It's made of durable weather proof resin
Question:	Will this work inside a hose reel
Answer:	I’m really not sure. Mine does not blink. I have had mine for a full summer now and they have never blinked. I would contact the seller

Product features

Specification

• Length：50ft
• Diameter of the valve: 5/8 inch
• Weight: 5lb
• Lowest Working Temperature: 14℉ (-10℃)
• Highest Working Temperature: 122℉ (50℃)

304 Stainless Steel

50ft long,

Made of the 304 Stainless Steel,

Never twist, tangle or kink

Can be stored easily

Durable Design

Rubber gasket on each end for a tight seal to prevent the hose from leaking.

10 Patterns Spray Nozzle Included

Spray nozzle has 8 kinds of watering setting(SHOWER, CONE, JET, SOAKER, ANGLE, MIST,1/2VERT, CENTER, FULL, FLAT)

Just rotate the bezel and switch to the function you needed.

Product description

If you're tired of hard PVC hoses that crack or collapse when bent, try using silicone tubing instead. Once you use silicone tubing, you won't go back. Silicone is UV resistant; it does not age and deteriorate outdoors. The tube is very pliable and stretchy, allowing you to make tight turns and stretch it over barbs that are a little too big. This size (1/4 * 3/8) is very versatile - common uses are small water pumps such as PC water cooler radiators, blocks and pumps, small pumps for fountains, solar, coffeemakers, and other applications. This tube has a thick 1.5mm wall so it can accommodate a bend radius of approximately 1.5 inches - you can make a 3 inch U-turn without the tube collapsing when empty. And what is so awesome about silicone, is that even if it collapses, it will spring back without any creases, because the material is incredibly stretchy and resilient to damage.

• 1/4” inner diameter, 3/8" outer diameter - versatile size that fits many small appliances (small water pumps, etc).
• Good wall thickness, does not collapse easily. Silicone stretches, this hose can fit over larger barbs (can stretch to fit over objects up to 11mm - 7/16" in diameter).
• UV resistant; does not deteriorate outdoors. Extremely durable.
• Insulates extreme heat and cold, works from -100°F to +500°F.
• Made in U.S.A.

User questions & answers

Question:	Is this platinum or peroxide cured
Answer:	I used enamel hardener by Valspar.
Question:	Will this tubing absorb odors and smell bad? (ie could it be used for a medical herbal vaporizer below 500f
Answer:	I would just do enamel if you not doing a show car
Question:	What is the country of origin for this product
Answer:	Mine was gloss black
Question:	Will this work safely as a replacement hose for the Volcano hybrid
Answer:	No it does not. Hardner must be purchased separately.

Product description

Autobahn88 64mm 2.5" Silicone Heat Resistant Air Ducting Flexible Intake Hose, Red, 3 Feet

Trademark Disclaimer: This listing products are not sponsored or endorsed by, or affiliated with the brands its parts fit. All product brands, logos, vehicle makes/models and names are properties of their respective owners. Autobahn88 is the trademark of Autobahn88 Company.

• Spiral Spring Steel Wire inside
• Perfect for Brake / Air intake ducting
• Essential for Racing / Drag

User questions & answers

Question:	Can this be used as a dryer vent
Answer:	Unfortunately, No.
Question:	what is the temperature rating for this hose? and can you please tell me in what direction the coil spirals? clockwise or counter-clockwise? thx
Answer:	21 day cure time. So the drying action is aerobic and the skin over feature slows it down, interesting. Can the cure time be decreased in anyway?
Question:	Is there a metal flange or coupler fitting for this 2 1/2" air duct hose
Answer:	I haven't used the paint for that excellent idea, but I don't see why you can't. It's thick enough to adhere to the plastic and not slip. Good luck!
Question:	Can this be used as part of a utv snorkel kit or would it dry rot over time
Answer:	Yes

Product description

Material: Food Grade Silicone,color:Translucent

Inner Dia (ID): 10mm (3/8 inch)

Outer Dia (OD):14mm; Total Length: 1M/3.3ft

Shore Durometer A:30shoreA-80shoreA

Working Temperature:-40°C---200°C (normal)



Package Content: 1 Meter Silicone Tubing



Application:



1,micro pump, coffee machines, wine making, oxygen generator, nebulizer,etc

2.also it can be used in home appliances, aerospace, military.Automobile manufacturing, electronic components, transformers, motors.

3. food machinery with connecting tube; drinking fountains, coffee maker, water heaters, rice cookers and other connecting pipe, conduit; casing and Instrument;connecting pipe, tube, hose etc

• Pure silicone rubber, anti-oil ,Environmentally friendly,softness, durable
• Temperature resistance from -40~200 Celsius degree
• Anti-aging, Ozone resistance, Insulating, No corrosion from copper and silver and so on.
• High temperature resistance, good resistance to anti-aging performance.
• Packing included: 10X14mm silicone tubing 1 Meter

User questions & answers

Question:	Does it bend easiy
Answer:	It can be used outside but it will need to be sealed with a UV and weather protective sealer. FolkArt does have a line of outdoor paints that have a sealer and primer all in 1 if you would like to use those instead. Here is the link on Amazon: https://www.amazon.com/dp/B004D4UT6O/ref=twister_B01GRWD4H0?_encoding=UTF8&psc=1
Question:	How long is this? It is not in the description
Answer:	How to Cure FolkArt Enamels . Bake Method for Curing Painted Glass Projects Allow painted item to dry for 24 hours to be sure all layers of paint have dried. Place project in a cool oven, as the glass must heat gradually with the oven to avoid breakage; do not place glass in a hot oven. Set oven temperature to 350ºF. Once temperature has reached 350ºF, allow the project to bake for 30 minutes. After 30 minutes, turn the oven off and let glass cool down completely before removing from the oven. Cured surface can be washed 72 hours after baking. While painted surfaces can be safely cleaned in dishwasher, washing by hand in warm soapy water is the best way to extend the life of your project. Not safe for use in microwave. Air-Dry Method for Curing Painted Glass Projects Paint is cured to the surface after 21 days; however, air-dried projects are NOT suitable for use in the top rack of your dishwasher.

Product description

Mishimoto has developed a line of heat resistant silicone ducting, available in four sizes to fit a variety of vehicles and uses. Mishimoto heat resistant silicone ducting can be used to channel cool air to many vital locations in the vehicle such as the brakes, air intake, or even the driving compartment of race vehicles.

• Universal silicone ducting for cool air
• Universal silicone ducting for cool air
• Silicone construction for improved heat resistance
• Cool vital locations such as the brakes, air intake, or even the driving compartment of race vehicles
• Mishimoto Lifetime Warranty

User questions & answers

Question:	Will your 3" silicone ducting withstand 212°F heated air
Answer:	You must bake these in the oven! We decorated ceramic mugs and let them dry for a couple days; then, we put one in the dishwasher. All of the ink came completely off. We tried washing another by hand; the ink rubbed off quite easily. We baked another one in the oven (425 degrees for 30 minutes; turn oven off; let mug cool completely in oven). After that, it survived the dishwasher. Though we still would recommend hand washing to prevent fading.
Question:	what is the max temp this hose can handle
Answer:	I use regular art brushes when painting on glass. The great thing about this product is that you don’t have to fire it in the oven.
Question:	Is this waterproof also? Was looking to use it as a snorkel system on an atv
Answer:	there is no reason the paint would not dry inside a wine bottle as well as it does on the outside if you clean and prep the surface properly.. might be a challenge inside the bottle but, you are not planning to fill it with any kind of liquid? I tried painting the inside of a vase for a 3d effect, it peeled and, you would not paint any surface food might touch and leave a margin on glasses... most of these paints are not food safe
Question:	Can I cut into half with a cutter and clamp it to the pipes
Answer:	This paint is not a translucent paint and it is not intended to be used on fabric.

Product features

Silicone Construction

All Mishimoto hoses are made from durable silicone for increased pressure tolerance.

Direct Fit

Mishimoto hoses are a direct OEM fit ensuring that your installation is a breeze.

Three Colors

Mishimoto hoses are available in black, blue, or red to enhance the look of any engine bay.

Heat Resistant Fibers

Mishimoto hoses are constructed with heat-resistant fibers embedded in high-grade silicone for exceptional durability.

Increased Reliability

Mishimoto hoses are constructed from high-strength silicone meant to outlast your stock hoses.

Protection from Oil

Over time, oil will degrade your stock rubber hoses. Mishimoto's silicone hoses are engineered to last.

.

Smooth Interior

The smooth silicone interior of Mishimoto hoses allows maximum airflow.

Brand that Customers Trust

Mishimoto is a name customers can trust to provide performance satisfaction and our customers know we'll always be there to support our products in every way.

Product description

Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% silicone rubber with 304 stainless mesh outer covering, DEI EXO Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500 degrees Fahrenheit.

• Silicone glass sleeve (DEI Fire Sleeve) surrounded by 304 stainless mesh outer covering
• Withstands 500 degrees Fahrenheit continuous heat / 2000 degrees Fahrenheit intermittent heat
• Allows direct contact to heat source - perfect for insulating wiring, hoses, oil / brake / transmission lines, and more
• Protects from burns during under hood repairs and maintenance
• Includes a 16" length of Fire Tape

Product features

EXO Sleeve - High-Temperature Resistant Wire/Hose Sleeving

Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% silicone rubber with 304 stainless mesh outer covering, DEI EXO Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500 degrees Fahrenheit.

Product description

This 44” Stainless Steel Hose (B-0044-H) features a flexible design perfect for pre-rinse units. Replace overused T & S Brass hoses withThis one and simply attach existing spray valves and risers, or mix and match your desired spray valve and setup withThis convenient hose. The hose is lined with polyurethane for greater longevity so you can count on it to strongly guide water flow in intensive food service environments for years. Features:44” length including grey handle010476-45 washer furnished with hose¾ UN female inlets QUALITY BUILT IN: T&S Brass has built a reputation over the past 70 years as the market leader in high quality Food Service Plumbing Products.

From the Manufacturer

QUALITY BUILT IN: T&S Brass has built a reputation over the past 70 years as the market leader in high quality Food Service Plumbing Products.

• 44" flexible stainless steel hose with heat resistant gray handle
• Polyurethane inner tubing
• 3/4-14 UN female outlet
• 3/4-14 UN female inlet
• Hose washers included

User questions & answers

Question:	Metal spine broke in less than three months and cut through the hose. Is there any warranty? I’m seeing this in many other reviews as well
Answer:	In most cases, no. Majic Diamond Hard RePurpose has excellent adhesion to a wide list of substrates without the need of a primer. The reasons a primer may be recommended are (a) when making a drastic color change, (b) painting over un-sealed surfaces that may result in extractive staining (e.g. over certain woods, water-stains, crayon, etc.), or when painting over surfaces subject to rusting & corrosion (bare ferrous metal, etc.). Surface prep generally requires that the surface be clean, dry and free of any surface contaminants that may inhibit the product's ability to adhere to the surface. (Hint: Although not necessary for adhesion, a light "scuff-sanding" of glossy, slick surfaces, aids in even greater adhesion to the surface + better hiding & a more uniform application of the finish product).
Question:	Is this compatible with a Duke faucet
Answer:	I don’t like these marker thanks
Question:	It says 3/4" hose thread on each end, but the matching sprayer is 1/2" ips? can someone confirm the thread type on each end
Answer:	A basic gloss spray should be fine. However, we suggest waiting at least an hour minimum before applying any type of gloss.
Question:	Can we adjust the pressure in the hose fixing by any chance? I did replaced with this hose and the water pressure went down dramatically
Answer:	You cannot use this paint on wine glasses. It will always come off. These paints are oil-based and you need water-based paints for glass. I recommend FolkArt Enamel paint, which you do cure (bake).

Product features

B-0044-H

• 44" flexible stainless steel hose with heat resistant gray handle
• Polyurethane inner tubing
• 3/4-14 UN female outlet
• 3/4-14 UN male inlet
• Hose washers included
• Material: Polished chrome plated brass end fittings, thermoplastic handle and stainless steel hose

Company History

T&S Brass and Bronze Works, Inc. is a family run company that has been providing innovative solutions to the foodservice and plumbing industries for more than 70 years. Today, with facilities around the world, T&S takes pride in its environmental initiatives from green manufacturing processes to development of innovative water- and energy-conserving products.

Conservation

T&S has been dedicated to water conservation for decades, engineering products that set new standards for both high efficiency and high quality. Today, we’re bringing the blue of T&S to a new level of green, creating products and implementing manufacturing processes that flow directly from our commitment to sustainability. In the end, it’s all about helping save natural and financial resources for our customers. It’s our mission — and it’s part of everything we do.

Quality & Innovation

T&S Brass is founded on a commitment to quality and innovation. We have set the standard for new products designed to keep up with evolving applications while reducing installation time and preserving our long-standing committal to product quality. Our heavy-duty brass castings and cartridges have proved themselves as long-term fixtures in many commercial applications.

Product description

Briggs & Stratton hoses are heavy-duty, resist kinking, stay flexible in EXTREME cold and can be used with hot water. 5/8-inch diameter, withstands hot water up to 200-degree F, coil easily – flexible to -25-degree F. Durable 100-percent rubber cover stays flexible even in temperature extremes. Engineered for commercial, residential and recreational use. Limited lifetime warranty – against material defects and workmanship. Made in the USA of US and Global parts.

• 25-feet length
• Crush-proof heavy duty couplings
• Industrial-style reinforcing for high burst strength
• Nickel plated brass male and female coupling
• Rubber washer for watertight connections

User questions & answers

Question:	Probably a dumb question, but could I link two of these together? Thanks
Answer:	It works well for me 🤷
Question:	Will this hose stand up to vehicles running over it? I need a hose that I can run across the road and will withstand an occassional car
Answer:	Hello, thank you very much for your interest in our 25ft expandable garden hose. Regarding the question you mentioned, we have not done such an experiment, but some customers have used it in this way, but please pay attention to drain the water in the garden hose after use. Thank you Have a great day！
Question:	What makes a rubber hose better than vinyl
Answer:	This hose is useless no matter where it is made.
Question:	Has anyone tried storing it in a hose pot? Is it easy to coil? Putting away my current hose after watering is like fighting a cobra
Answer:	Yes, this hose can be used for cleaning up your dog, car, watering garden, etc. Good choice. Tks.

Product features

Briggs & Stratton Premium Heady-Duty Rubber Garden Hose

Briggs & Stratton hoses are heavy-duty, resist kinking, stay flexible in extreme cold and can be used with hot water. 5/8-inch diameter coils easily and is flexible to -25-degree F. Durable 100-percent rubber cover stays flexible even in temperature extremes. Engineered for commercial, residential and recreational use. Made in the USA of US and Global parts.

Product description

This peroxide-cured silicone tubing is made from FDA sanctioned ingredients, and is odorless, tasteless and inert. This tubing is notable for its resistance to temperature extremes, and has excellent electrical properties making it a great choice for appliance and computer applications. It contains no sulphur or other acid-producing chemicals, which eliminates the possibility of staining, corroding, or deteriorating other materials that it contacts. It is also extremely resistant to ozone and U.V. over long time periods.

• Product Type: Unreinforced Silicone Tubing - Peroxide Cured
• Max Operating Temp: 500F
• Working/Burst PSI (at 70°F): 10/30
• Material Certifications: FDA, NSF 51[U]

User questions & answers

Question:	Is this hose very flexible, as in when you pick it up it goes limp? does it "give" such that i could insert a coupling made for 1/2" diameter tubing
Answer:	The kit comes with colors but also pigments. For the pigments, you must apply a white or cream color base coat first and then apply the pigment over it for the fluorescent effect to show. Hope this helps.
Question:	Width to match violin shoulder rest leg tubing replacements: are these flexible enough like the latex/rubber tubing? what width for general rests? thx
Answer:	Diamond Hard RePurpose Satin Enamel is a premium quality, water-borne acrylic coating that demonstrates exceptional adhesion, and durability, to a variety of substrates. RuPurpose is a great choice for melamine cabinet fronts, and also for your cabinet sides (veneer, laminate, finished wood, etc.). The key, of course, is surface preparation - the surface must be clean, dry and free of all dust, dirt, grease, oil, wax & polishes, and other surface contaminants that may inhibit the adhesion and performance of Repurpose. Although not absolutely necessary for adhesion, after cleaning surface I always recommend a slight "scuff-sanding" of melamine, or plastic laminate, with a very fine paper (220 - 350 grit) to create a "profile" for a greater, and faster, mechanical bond to these surfaces. RePurpose dries very quickly, and reaches maximum hardness & adhesion in approximately 7-10 days - during this time, handle painted items gently, and do not subject to cleaning surface for 2 weeks after application. Care & Maintenance: Use only a soft rag or sponge & mild, household detergent for cleaning surfaces painted with RePurpose (recommended Dirtex Powder, Soilax Powder, or other low-sudsing, phosphate-free detergents). Do NOT use abrasive cleanser (Ajax, Comet, Soft Scrub, etc.) as they may damage the acrylic film. Do NOT clean painted surface with "spray-type" cleaners, such as Fantastik, Formula 409. Dirtex Spray, etc.) as these products may contain solvents that soften, or remove, acrylic coatings. There is no need to polish or wax a RePurpose finish as continued applications may soften the finish.
Question:	Is this tubing suitable for drinking water? is it b.p.a. free? My customers are sure to ask
Answer:	Hi, and thank you for your inquiry... At Majic Paints, we really don't manufacture anything that we could recommend, or would be suitable for use on a sink. Magic RePurpose is a premium grade acrylic satin enamel, that exhibits exceptional adhesion to a variety of surfaces, and substrates, and provides excellent protection and durability to those surfaces painted with RePurpose. Unfortunately, Diamond Hard RePurpose is not designed for surfaces subject to immersion, or submersion, areas/surfaces designated as "wet" areas. I hope this info is helpful - again, thank you.
Question:	What is the wall thickness on this tubing? Will it collapse at temp under a slight vacuum
Answer:	Majic RePurpose is solid acrylic enamel that offers excellent adhesion to a host of surfaces, including properly prepared ceramic tile, plastic shower & tub surrounds, melamine and other difficult substrates...having said that, RePurpose is NOT recommended for surfaces subject to immersion, submersion or "wet" areas (such as shower stalls, etc.). Frequent exposure to harsh chemicals (e.g. lime & rust-stain removers, grout cleaners, etc.) and strong, or abrasive, "scrubs" may soften, or damage the film.

Product description

Parker HWR5850 HWR Premium Hot Water Hose Assembly, Red, 5/8" ID x 50' Length, 125 PSI. This hose is made using heavy-duty double spiral reinforcement (Rated 125psi, Burst 500psi). Durable 100% rubber cover that stays flexible even in temperature extremes (-40ºF to +212ºF). Crush-proof heavy-duty nick-plated brass couplings. O-ring seal for water tight connections.

• 5/8" ID x 50' Length
• Rated 125 PSI
• Durable 100% rubber cover
• Crush-proof heavy-duty nick-plated brass couplings
• O-ring seal for water tight connections

User questions & answers

Question:	So I guess the hose that for some reason they're calling .625" is a 5/8" by another name and will fit a std. US faucet
Answer:	I sell painted glassware for a living and I use this paint and I have contacted all the major manufacturers for safety reasons. You cannot eat from dishes if you paint on them. You cannot paint up to the rim of a glass. Your lips or food or beverages should never touch the paint. Personally I do not think it's dishwasher safe at all. Paint decorative dishes only (or reverse paint on glass dishes), paint glass that leaves an inch from the top and hand wash your pieces with a non abrasive cleanser - don't soak or put in the fridge (condensation loosens the paint) and the work will last for many years.
Question:	If i bought a 50 & a 25 ft house can i screw them on for 1 solid 75 ft hose? or...does it need fittings for that sort of thing? curious
Answer:	Not sure how big sprayer tank is but these are small model paint size bottles? 1/2 ounce ? And clean up with water
Question:	Can a hot water hose be used for cold water? I've heard they kink with cold water
Answer:	Regular enamel paints and fluorescent enamel paints from TESTOR'S are the best of the best of the best. But the paint brush that comes with the paint sets is crappy. The paint brush can be used for painting the handle of a walking stick, and it can be used for painting a hook where you hang your hat. But the paint brush is too crude and too crappy for making any detailed paintings, such as paisley designs, or painting a Revell plastic model car, or for painting your name on a compact disc, or for painting the name of a rock'n'roll band on a flash drive that contains your mp3 files.
Question:	Will this hose freeze up over night if using to water cattle or left outside hooked up in -20 degree weather
Answer:	The answer is this: STEEL BALLS ARE NOT NEEDED FOR MIXING. I have used Testors enamel paints every single month since the year 2013. I've used them mainly for painting paisley designs on compact discs, after burning music compilations into the blank compact discs. My compilations include, rock'n'roll songs about men, such as, "Walk Like A Man," compilations of country and western music, compilations of jazz, such as music recorded by Sonny Stitt, Gary Burton Quartet, Billy Harper on sax, and compilations of classical music. Before using the Testor's enamel, I always stir the paint with a very thin wooden stick. I use the handle of a very thin paintbrush. The thinnest paint brushes are the PRINCETON velvetouch paintbrushes. I have NO IDEA WHY ANYBODY WOULD WANT TO USE STEEL BALLS (THAT MAKES ABSOLUTELY NO SENSE). Just use the handle of a narrow paintbrush and then, after stirring, wipe off the handle with a paper towel (a 1 inch by 1 inch square of paper towel). Best regards, Tom Brody, Ph.D., Berkeley, California. By the way, I have an ART EXHIBIT RESUME, and so I know what I'm talking about.

• GREATER DIAMETER HOSE THAN COMPETITORS with BRASS CONNECTORS- 16mm hose compared to competitors 12mm, our best selling hose delivers optimal water pressure and durability with beautiful 304 stainless steel and brass connectors to out performing all other steel hoses.
• FLEXIBLE, KINK-FREE, TANGLE-FREE - All weather flexibility with excellent maneuvering around bushes, flower beds, yards and trees. Our flex hoses are incapable of tangling and kinking, which makes them easy to use and attach to the faucet.
• COILS PERFECTLY - Puncture proof and advanced steel construction technology allow the hoses to coil perfectly each time and unreel themselves.
• LIGHTWEIGHT, DURABLE - Hoses are made of 304 stainless steel that provides excellent protection against rust and corrosion while not making you feel heavy at all.
• 100% WARRANTY COVERED - 30-Day Money Back Guarantee for All; 12-Month Replacement Warranty, 7/24 Online Customer Service, Lifetime Technical Support Guarantee.

User questions & answers

Question:	where is this hose made
Answer:	Hey, this is not like a vinyl wrap - it is instead a regular paint, so it will not just peel off.
Question:	How long is it
Answer:	I don't know, but it sounds like a good idea, so I plan to try it myself tomorrow. Light bulbs are fairly cheap, so if it doesn't withstand the heat, no great loss. You might ask General Electric if their light bulbs will withstand a 350 degree oven for 30 minutes.
Question:	can this hose handle 130PSI unregulated spigot
Answer:	I used it straight from the bottle on tile. I think you could dilute it to look translucent on glass.
Question:	Can this hose last under sustained pressure, meaning if the water were to stay turned on
Answer:	There are two types of curing methods that can be used with FolkArt Enamels , baking and air drying. Bake Method – Allow painted item to dry for 1 hour to be sure all layers of paint have dried. Place project in a cool oven. Set oven temperature to 350ºF and bake for 30 minutes. Glass must heat gradually with the oven to avoid breakage. Do not place glass in a hot oven. After 30 minutes, turn the oven off. Let glass cool completely in oven. Do not use for 72 hours. Air Dry Method – (Recommended for Glitter finish) Air dry project for 21 days before use.

Product description

If you're tired of hard PVC hoses that crack or collapse when bent, try using silicone tubing instead. Once you use silicone tubing, you won't go back. Silicone is UV resistant; it does not age and deteriorate outdoors. The tube is very pliable and stretchy, allowing you to make tight turns and stretch it over barbs that are a little too big. This size (3/8 * 1/2) is quite large - perfect for medium size pumps and a myriad of fluid transfer equipment from lab work to brewing to goat milking. This tube has a thick 1.6mm wall and can accommodate a bend radius of approximately 2 inches - you can make a 4 inch U-turn without the tube collapsing when empty (5 inch U-turn is recommended). And what is so awesome about silicone, is that even if it collapse, it will spring back without any creases, because the material is incredibly stretchy and resilient to damage.

• 3/8" inner diameter, 1/2" outer diameter - (9.52 x 12.7 mm) - large tube that can stretch to fit over barbs up to 14mm in diameter.
• Highest grade, platinum cured, maximum transparency, SHORE-A #60 hardness - a bit stiffer than our smaller tubing on purpose to prevent collapse. Silicone stretches and does not kink/collapse. Can hold a partial vacuum (about 0.5 atm) without collapse.
• UV resistant; does not deteriorate outdoors. Extremely durable.
• Insulates extreme heat and cold, works from -100°F to +500°F.
• Guaranteed to arrive fresh and springy, without creases. BPA and lead free; food safe, medical grade. Made in U.S.A.

User questions & answers

Question:	Can i use this as an 'output hose' with the amazon esumic 12 volt water diaphragm pump? pump from rain barrel to water flowers about 25' away
Answer:	This will work fine Diane. I once said that you can paint over dirt and get a nice finish with this material and it's true. Your trick is going to be using two coats as the first covers and the xecond gives the 'hammered look. Make sure the first coat is dry before adding the second and you need no luck at all; just about 40 minutes.Very Best.
Question:	Can i use this for small engine exhaust
Answer:	1 can
Question:	can I use it for draining my portable airconditioner
Answer:	This has a moderate gloss to it; I did another few layers of clear coat over top of this to protect and seal it.
Question:	Is this good to use for beer coming out of a kettle to a wort chiller
Answer:	I believe that it is a lacquer paint, if I remember correctly. I remember that it is definitely NOT just plain acrylic.