12 best inline fans

Product description

Inline Duct Fan

The duct fan system is designed to quietly cool AV equipment rooms and closets, and to ventilate various air circulation and exhaust projects. Features an inline speed controller utilizing PWM-technology. Contains a mixed-flow design and an EC-motor for a quiet and high static-pressure performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one duct fan unit, one inline speed controller, installation manual, and all necessary mounting hardware.

Precise Speed Controller

The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features an EC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan's motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight-speed options are available with a power switch, and backup memory. This S6 model can be connected to the smart controller of the CLOUDLINE T6 (AI-CLT6) model to share the same programming and power source.

Quiet and Energy Efficient Design

The inline booster fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids and performs well even in harsh environments.

• Designed to ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.
• Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls.
• Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.
• Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware.
• Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 402 CFM | Noise: 32 dBA | Bearings: Dual Ball

User questions & answers

Question:	how much static pressure can this produce? can it push a couple hundred cfm thru 6 inch duct for 40ft
Answer:	Hello, Thank you for your inquiry. I would recommend using compressed air to clean the unit from the vents. This unit produces 300 Pa of static pressure with a highest CFM rating of 351. That being said, it will initially push a couple of CFM in the beginning but the further it goes the less CFM it will push. Kind Regards,
Question:	Does the fan come with a pressure switch
Answer:	Hi there, Thank you for reaching out to us! The fan only comes with a speed controller that will allow you to adjust the speed of the fan, there is no pressure switch. Kind regards, Kenny Ngo AC Infinity
Question:	Is the impeller on fan made of plastic or metal
Answer:	Hi there, Thank you for reaching out to us! The blades on this fan would be made of plastic. Kind regards, Kenny Ngo AC Infinity
Question:	What is the range of cfm output, at different settings? can i bring it down as low as 100 cfm
Answer:	Hi there, Thank you for reaching out to us! Below I have provided an approximate breakdown of the CFM for the fan on each different speed. 44 / 88 / 132 / 176 / 220 / 264 / 308 / 351 Kind regards, Kenny Ngo AC Infinity

Product features

A Quieter and Smarter Inline Fan

The new CLOUDLINE series contains a cutting-edge Electronically Commutated (EC) motor, controlled using precise electronic pulses and smart programming. This enables the inline fan to operate considerably quieter, and reach low speeds without generating noise or heat. The EC motor is also twice as energy efficient and can save up to 40% in energy costs, paying for itself in the long run.

Smart Programming

T-series models include a programmable controller with precise temperature and humidity sensors located on the 12-foot corded probe.

Quiet PWM Motor

Each fan uses a quiet, energy-efficient EC motor controlled using Pulse Width Modulation (PWM). Dual ball bearings allow for omnidirectional mounting.

Mixed-Flow Design

Featuring a mixed flow design, the fans maintain peak performance in high static pressure environments. Ingress-protected against dust and liquids.

Plug and Play

The complete kit includes the inline fan unit, controller, user manual, and everything needed to mount the fan and power it through an outlet.

CLOUDLINE 4-Series

A CLOUDLINE T4 plus CLOUDLINE S4 system can be linked to the same smart controller, and used in conjunction for a total of 410 CFM airflow. This set-up is ideal for ventilating smaller grow tents and cooling AV rack cabinets.

CLOUDLINE 6-Series

A CLOUDLINE T6 plus CLOUDLINE S6 system can be linked to the same smart controller, and used in conjunction for a total of 804 CFM airflow. This set-up is ideal for large grow tents, AV closet cooling, and boosting airflow for HVAC projects.

MIX and MATCH

The same controller can connect CLOUDLINE fans of different sizes, to share the same programming. For example, an exhausting CLOUDLINE T6 with a filter can share the same controller as an intaking CLOUDLINE S4, to balance static pressure.

• A duct fan designed to increase airflow in HVAC systems and ventilate home spaces like attics and workshops.
• Features a variable fan speed controller, enabling you to optimize airflow and noise level for any application.
• Unibody die-cast construction with no welded seams; reduces vibration while ensuring smoother airflow.
• AC brushless motor with steel blades and lubricated bearings; not suitable in restricted airflow applications.
• Duct size: 6” | Dimensions: 7.28 x 5.90 x 5.90 in. | Airflow: 265 CFM | Noise: 35 dBA | Bearings: Dual Ball

User questions & answers

Question:	Where can I get a aviation port cord exatention
Answer:	Hello, Thank you for taking the time to reach out to us! Unfortunately, the RAXIAL S6 does not have an extension cord. Please accept our sincerest apology! Thank you for your question! Kind regards, The AC Infinity Team-
Question:	At how high of temps can this fan function or do you recommend another product? Does it have thermal protection
Answer:	I am currently using a 2x2x4 grow tent with 2 "600" watt LED lights that I run from 7pm to 10am and as long as I barely turn the speed controller up a 1/4 turn when lights come on it's about 80 degrees on my therm under the light. Then when the lights go off I just turn down to low and it's perfectly fine gets down to 70 degrees if that's what your house is at. I do HVAC and I was totally blown away with the power, the constructions of material , it's a high quality product I was already thinking of using for customers not getting enough air to bath room or far away room ect.
Question:	Is it possible to Daisy chain this fan to the cloudline T
Answer:	I sort of daisy chained a s4 booster for intake with a T6. I used a 3 grounded outlet adapter to plug both into the temp controller. Works for me.
Question:	Will this plug into T8 digital temp and humidity control
Answer:	Hello there, Thank you for taking the time to reach out to us. We sincerely apologize for any convenience. Unfortunately, our Raxial Booster Fans are not designed to be plugged into the Digital Thermal Controller included with our Cloudline Series of Inline Duct Fans. We will, however, forward your message to our product development team to gauge interest. If you have any other questions, please contact our customer support department directly through our company website and one of our Customer Service Agents will be happy to assist you. Kind regards, The AC Infinity Team -

Product features

Premium Solid Steel Body

This booster fan boasts a matte black aesthetic that expresses the heavy-gauge construction and its high quality. The galvanized steel body has no folded seams, enabling the fan to perform with low noise and no rattling. It also features crimped ridges on the exhaust end for a tight, secure grip on your flex or rigid ducting.

Speed Controller

All models include a speed controller to optimize airflow and noise. The soft rotating knob provides ease of use and quick responses to changing conditions.

High Performance Motor

Uses an AC motor that spins smoothly and relatively silent. Capable of high airflow boosting in applications like active intake for grow tents.

Long-Lasting

Features a 67,000 hour lifespan, using balanced steel blades and lubricated ball bearings that eliminates the need to maintain the fan.

Tight and Secure Lock

The aviation ports are easy to plug in and tightly secures each other using a retainer that also keeps moisture, dust and debris out.

Product description

Inline Duct Fan

A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an EC-motor with PWM-control for a quiet and energy-efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and all necessary mounting hardware.

Intelligent Controller

The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features include a countdown timer, alarm system, and eco-mode. Includes a detachable 12-foot precision probe that is water-resistant. This EC smart controller can power and control two inline fans of any size like this CLOUDLINE T6 with an S4.

Quiet and Energy Efficient Design

Features an EC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed-flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.

• Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
• Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
• Mixed flow design combined with a PWM-controlled EC-motor for a truly quiet and energy efficient performance.
• Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
• Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 402 CFM | Noise: 32 dBA | Bearings: Dual Ball

User questions & answers

Question:	Where is the humidity sensor? Is it on the sensor probe that also does temp
Answer:	Hello, Thank you for taking the time to reach out to us. Yes, the humidity sensor detector will be on the same cord as the temperature probe. Kind regards, AC Infinity
Question:	When unplugged and plugged back in will it return to the same speed as before? I want to add a switch to the outlet
Answer:	I just tried it because of your question, yes it does, but I think you're asking about a timer situation, I would say that you shouldn't bother with a timer, the reason to get this fan over others is the programmability, this thing self adjusts its own speed based on the high/low temp and the high/low humidity that you enter, the power used to run it is very small.
Question:	Humidity and temperature way off does anybody else have this problem? Can it be fixed
Answer:	If all of you that have problems with these would read the instructions you can calibrate both temp and humidity as well as fix any problem with your fan not working it’s probably not turned on or is in the wrong setting check the instructions before blaming the unit these things are great in my opinion
Question:	What are the cfm rating on it
Answer:	Hello there! Thank you you for taking the time to reach out to us with your product question! The CFM rating for the CLOUDLINE T6 is 351 CFM. Also, for your reference, I have included all technical data associated with the T6 (please see below): Product Identification Manufacturer AC Infinity Inc. Product Name CLOUDLINE T6 Product Model AI-CLT6 UPC Code 854759004792 Product and Mounting Dimensions - Fan Unit Total Dimensions 7.87 x 12.60 x 8.35 in. (21.2 x 32.0 x 20.0 cm) Mounting Hole-To-Hole Distance 3.15 X 2.36 in. (8.0 x 6.0 cm) Screw Hole Size Ø 0.236 in. (Ø 0.6 cm) Cord Length 144 in. (12 feet) Product and Mounting Dimensions - Controller Total Dimensions 5.20 x 3.11 x 1.10 in. (13.2 x 7.9 x 2.8 cm) Backside Enclosure Dimensions 4.41 x 2.68 in. (11.2 x 6.8 cm) Required Mounting Hole 4.48 x 2.76 in. (11.4 x 7.0 cm) Hole to Hole Distance 4.71 x 2.64 in. (12.0 x 6.7 cm) Screw Hole Size Ø 0.157 in. (Ø 0.4 cm) Display Size 2.25 x 1.25 in. (4.7 x 3.2 cm) Cord Length 72 in. (6 feet) Thermal Probe Length 72 in. (6 feet) Mounting Template Installation Manual PDF Product Performance and Technical Specs Total Airflow 351 CFM Total Noise 32 dBA Static Pressure 300 Pa Operating Voltage 24V DC Power 40 W Current 1.67 A Wall Adapter Input 100 to 240V AC Operating Humidity 35 to 85% RH Operating Temperature 14 to 230°F Ingress Protection IP 44 Fan Bearings Dual Ball L10 Life Expectency 67,000 Hours Fan Quality Approvals UL, CE, TUV, RoHS Thank you for your question! Kind regards, Andrew Avila AC Infinity

Product features

A Quieter and Smarter Inline Fan

The new CLOUDLINE series contains a cutting-edge Electronically Commutated (EC) motor, controlled using precise electronic pulses and smart programming. This enables the inline fan to operate considerably quieter, and reach low speeds without generating noise or heat. The EC motor is also twice as energy efficient and can save up to 40% in energy costs, paying for itself in the long run.

Smart Programming

T-series models include a programmable controller with precise temperature and humidity sensors located on the 12-foot corded probe.

Quiet PWM Motor

Each fan uses a quiet, energy-efficient EC motor controlled using Pulse Width Modulation (PWM). Dual ball bearings allow for omnidirectional mounting.

Mixed-Flow Design

Featuring a mixed flow design, the fans maintain peak performance in high static pressure environments. Ingress-protected against dust and liquids.

Plug and Play

The complete kit includes the inline fan unit, controller, user manual, and everything needed to mount the fan and power it through an outlet.

CLOUDLINE 4-Series

A CLOUDLINE T4 plus CLOUDLINE S4 system can be linked to the same smart controller, and used in conjunction for a total of 410 CFM airflow. This set-up is ideal for ventilating smaller grow tents and cooling AV rack cabinets.

CLOUDLINE 6-Series

A CLOUDLINE T6 plus CLOUDLINE S6 system can be linked to the same smart controller, and used in conjunction for a total of 804 CFM airflow. This set-up is ideal for large grow tents, AV closet cooling, and boosting airflow for HVAC projects.

MIX and MATCH

The same controller can connect CLOUDLINE fans of different sizes, to share the same programming. For example, an exhausting CLOUDLINE T6 with a filter can share the same controller as an intaking CLOUDLINE S4, to balance static pressure.

• EFFECTIVE VENTILATION: Powerful blower with a fan speed of 2500 RPM for an air flow of 195 CFM. Moves air through your target location efficiently for optimal ventilation
• EFFICIENT DESIGN: Lightweight, compact fan takes up minimal space; ideal for applications where larger fans just won’t fit. Efficient flow deflector feature increases air flow while cutting noise output.
• LOW NOISE LEVEL: Fitted with a flow deflector that concentrates the fan stream and cuts turbulent kinetic energy to reduce sound output to just 30 dB
• EASY INSTALLATION: Flanges on both the intake and exhaust ends for simple and easy hookup and a cord length of 5.9 feet for hassle free setup.
• VERSATILE APPLICATIONS: Use anywhere that would benefit from improved air flow to reduce humidity, clear the air and lower temperatures in grow rooms, greenhouses, basements or kitchens; Can be used with a variable speed controller (bought separately)

User questions & answers

Question:	This fan runs on ac or dc power
Answer:	110 ac
Question:	Why is it when I went to pay for the 4” inline fan that was listed at for $25. 98 it went up to $35. Free shipping items $25 or more... Lies
Answer:	Because Amazon doesn't like you, obviously....lmao, nah never count on free shipping unless you have Amazon Prime, and the item has the word Prime in blue with a check mark...otherwise, expect a charge for shipping regardless of the item's description or Amazon's cost analysis. These items are oftenly sold by third party vendors, and Amazon can't always accurately estimate shipping costs for them.
Question:	Can you attach a variable speed controller to this
Answer:	You can, however, with just 200 CFM of air movement you may want to just keep it on full. The motor will make more humming noise if you use a speed controller to decrease speed. I found it makes less noise on full than it does if you decrease the speed which increases motor hum noise considerably.
Question:	Is my fan defective? For such a small fan it is extremely loud
Answer:	Use light weight clipper oil on the moter behind fan blades, also use tape to hold to pieces together after twisting back together. I own three need to add oil to all. All have been running non stop for over 6 months.

Product features

VIVOSUN 4 Inch 195 CFM Inline Duct Ventilation Fan

VIVOSUN inline duct fan helps with ventilation issues. This fan is built durable, runs smooth and quiet. Durable plastic fan housing and blades for extremely low noise.

Product Features

Diameter: 4 inch

Power Supply: 110/120V

Power: 28 W

Speed: 2500 RPM

Air Flow: 195 CFM

Cord Length: 5.9 feet

Application Scenarios

Used as intake fan to bring fresh air into grow rooms; Also used as exhaust fan in smaller setups with LEDs or Lights under 400W.

Product description

Product Description

An inline fan for duct boosting designed to improve airflow in heating and air conditioning applications, and ventilate home rooms like attics, workshops, bathrooms, and kitchens. Each fan uses an easy-to-use knob controller that adjusts fan speed for your specific airflow boosting needs. It features a unibody framework that helps reduce vibration and ensures smooth and low-resistant airflow. The matte black steel cylinder is fluted and ridged for easy and secure installation in-between ducting. Permanently lubricated dual ball bearings spin the balanced steel blades and allow the fan to be mounted in any orientation. This kit includes one AC powered inline booster duct fan, a speed controller with a power plug, mounting screws, and a cable management set.

Speed Controller

The inline variable speed controller can control the fan’s speed and turn it on or off. Turning the knob will increase or decrease the fan speed and optimize airflow and noise levels for your application. Its speed range includes a low, medium and high threshold, producing up to 106 CFM and 28 dBA in noise. This speed controller uses a female aviation plug with a metal retainer, tightly securing its connection to the booster duct fan.

Applications

This versatile inline booster fan is made to be installed in between ducting for various applications that need improved air delivery. In households, it boosts airflow from HVAC units to remove stale air and odor, ventilating attics, workshops, kitchens, basements etc. In grow tents, grow rooms, and indoor gardens, it’s primarily used as an intake fan to bring in fresh air. Please note this booster fan cannot be used standalone in high static pressure applications like room ventilation. Additionally, it is not suitable for use in applications with restricted airflow like systems that use carbon filters. For higher performance, see the CLOUDLINE Series.

• A duct fan designed to boost airflow in HVAC systems and ventilate home spaces like attics and workshops.
• Features a variable fan speed controller, enabling you to optimize airflow and noise level for any application.
• Unibody die-cast construction with no welded seams; reduces vibration while ensuring smoother airflow.
• AC brushless motor with steel blades and lubricated bearings; not suitable in restricted airflow applications.
• Duct size: 4” | Dimensions: 7.28 x 3.95 x 3.95 in. | Airflow: 106 CFM | Noise: 28 dBA | Bearings: Dual Ball

User questions & answers

Question:	Would this product be able to run dual voltage of at least
Answer:	If you don't mind the loud beep every time it turns on or off. My unit has an issue where it does this constantly.
Question:	I want to build a small airbrush box and looking for a very quiet fan. Would this be powerful enough to pull in the spray paint through a filter
Answer:	about 6-8 feet long
Question:	Besides price and how they look, how are Raxial units different from Cloudline
Answer:	I don't think it comes apart
Question:	Can you add a carbon filter
Answer:	No, we did not face any issues with smell. It's excellent! Even Oprah uses this same model :-) Hope you too enjoy it.

Product features

Premium Solid Steel Body

This booster fan boasts a matte black aesthetic that expresses the heavy-gauge construction and its high quality. The galvanized steel body has no folded seams, enabling the fan to perform with low noise and no rattling. It also features crimped ridges on the exhaust end for a tight, secure grip on your flex or rigid ducting.

Speed Controller

All models include a speed controller to optimize airflow and noise. The soft rotating knob provides ease of use and quick responses to changing conditions.

High Performance Motor

Uses an AC motor that spins smoothly and relatively silent. Capable of high airflow boosting in applications like active intake for grow tents.

Long-Lasting

Features a 67,000 hour lifespan, using balanced steel blades and lubricated ball bearings that eliminates the need to maintain the fan.

Tight and Secure Lock

The aviation ports are easy to plug in and tightly secures each other using a retainer that also keeps moisture, dust and debris out.

• Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
• Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
• Mixed flow design combined with a PWM-controlled DC or EC-motor for a truly quiet and energy efficient performance.
• Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
• Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball

User questions & answers

Question:	Can this fan be used as a dryer vent booster
Answer:	I would not recommend putting any fan in a dryer vent. Dryers don't catch all the lint and the rest blows out the vent. That lint is often somewhat sticky, particularly when fabric softener is used. A fan would create a place for all that lint to stick and it would quickly become covered. If you attempt it, make sure you can easily remove the fan for cleaning. Also it might be a fire hazard as the motor might expect a certain amount of air flow for cooling and the lint could plug that up causing it to over heat. The lint would then be excellent tinder. Ideally for your application a boost fan would not provide an obstruction to the air flow and would work on the venturi effect. Basically injecting high speed air at the edges to speed up the larger volume of flow in the middle. I don't think anyone makes such a fan however. The only example I can think of is the fan make by Dyson and sold as "bladeless" though it really has blades in the base. It is designed for another purpose however and cannot be used in your duct. I presume this is a gas dryer. Due to the hazards of it not venting properly, the best thing to do is probably to find a way to cut an exit hole closer to the dryer and use a shorter vent pipe. Electric dryers can be vented indoors thru a filter box that catches any remaining lint. That will increase the indoor humidity though.
Question:	Can this fan be used to draw radon gas out of my basement if exhasted outside
Answer:	I am using this for a radon fan. The radon numbers were in the 60s before the fan. After installing it, we have dropped down to 2-7 range. I'm going to add a second one and forgot get the binders to the same area of 0-2.
Question:	Would it work to install this fan through the house wall so that I can bring the cool, outdoor evening air indoors without having the windows open
Answer:	Hi Nikki!Thank you for your inquiry.We usually do not recommend bringing out door air directly into the house, it has to be conditioned first and its often better to just recirculate air. Depending on the amount of airflow you were looking for, that would be the determining factor. These units move quite a bit of volume of airflow and are primarily used in filtering or moving air from room to room. You would have absolutely no problems operating this unit in a room-to-room or exhaust fashion! We greatly appreciate your interest and consideration in regards to our cooling products!Warm Regards,Tommy KaragiasAC Infinity
Question:	What is the CFM, wattage, and decibel level
Answer:	To help alleviate confusion, wanted to chime in here to say the answer posted to this question is outdated from an OLD model. This product has had two improvements since... one is that the fan is now running on a 24v motor, and the CFM is now measured at 205 (improved from a 12v motor at 152cfm). As for noise, I don't think the decibel rating has changed as it is still quiet. The second improvement is much more recent (Decemenr 2018) and was made to the controller unit which now includes humidity control as well as temperature.

Product features

A Quieter and Smarter Inline Fan

The new CLOUDLINE series contains a cutting-edge Electronically Commutated (EC) motor, controlled using precise electronic pulses and smart programming. This enables the inline fan to operate considerably quieter and reach low speeds without generating noise or heat. The EC motor is also twice as energy-efficient and can save up to 40% in energy costs, paying for itself in the long run.

Smart Programming

T-series models include a programmable controller with precise temperature and humidity sensors located on the 12-foot corded probe.

Quiet PWM Motor

Each fan uses a quiet, energy-efficient EC motor controlled using Pulse Width Modulation (PWM). Dual ball bearings allow for omnidirectional mounting.

Mixed-Flow Design

Featuring a mixed flow design, the fans maintain peak performance in high static pressure environments. Ingress-protected against dust and liquids.

Plug and Play

The complete kit includes the inline fan unit, controller, user manual, and everything needed to mount the fan and power it through an outlet.

CLOUDLINE 4-Series

A CLOUDLINE T4 plus CLOUDLINE S4 system can be linked to the same smart controller, and used in conjunction for a total of 410 CFM airflow. This set-up is ideal for ventilating smaller grow tents and cooling AV rack cabinets.

CLOUDLINE 6-Series

A CLOUDLINE T6 plus CLOUDLINE S6 system can be linked to the same smart controller, and used in conjunction for a total of 804 CFM airflow. This set-up is ideal for large grow tents, AV closet cooling, and boosting airflow for HVAC projects.

MIX and MATCH

The same controller can connect CLOUDLINE fans of different sizes, to share the same programming. For example, an exhausting CLOUDLINE T6 with a filter can share the same controller as an intaking CLOUDLINE S4, to balance static pressure.

• EFFECTIVE VENTILATION: Powerful blower with a fan speed of 2550 RPM for an air flow of 390 CFM. Moves air through your target location efficiently for optimal ventilation
• SUPERIOR CARBON FILTER: 1050+ RC 48 Australian Virgin Charcoal Bed. Dimensions: 6" x 18"
• EFFECTIVE ODOR CONTROL: The carbon filter eliminates some of the most undesirable odors, pungent smell and particulates from indoor grow tent, hydroponics grow room.
• STURDY DUCTING+ 2 Stainless Clamps: Strong, flexible steel wire supports heavy duty triple layer duct walls.PET core is sandwiched in layers of fire-retardant aluminum that can handle temperatures from -22 to 266 Fahrenheit.
• ULTRA RELIABLE & ACCURATE THERMOMETER & HYGROMETER: are able to quickly report measurements every 10 seconds and has a wide measurement range of 14℉ to 122℉（-10℃~50℃), with a temperature accuracy range of around ±0.1℉ (±0.1℃).Humidity sensor measures humidity from 10% to 99%, humidity accuracy range around ±5%.

User questions & answers

Question:	Does it come with the straps
Answer:	You are asking about a summer fan which has 3 speeds and gives off a lot of air. This Delonghi safeheater gives off a low weaker fan air heat. Does a great job for a small room. Hope this helps !!
Question:	Is this 190 or 390 cfm...page says 2 different things
Answer:	Yes!!
Question:	Can I vent hot air out of grow tent up to attic, and can it be mounted horizontal or verticaly
Answer:	Yes. When the desired temperature is reached, this heater turns off and idles. When the room temperature goes below the set temperature on the heater, it turns on operates until the desired room temperature is reached. With this model, I believe the temperature varies +2 and -2 from the temperature set on the unit. So setting it at 72 degrees will result in your room cycling between 70 and 74.
Question:	Does it come with pre-filter
Answer:	it seems the biggest difference is price since Lowes carries the EL model for 39.98 and when I was shopping for this last week, the best price I found for the ER is at Walmart for 53.99

Product features

VIVOSUN 6 Inch Grow Kit

This VIVOSUN grow kit helps with ventilation issues. It makes your grow easier and more convenient.

Thermometer & Hygrometer gauge

VIVOSUN Thermometer & Hygrometer gauge are able to quickly report measurements every 10 seconds and has awide measurement range of 14℉ to 122℉（-10℃~50℃), with a temperature accuracy range of around ±0.1℉ (±0.1℃).Humidity sensor measures humidity from 10% to 99%, humidity accurancy range around ±5%.

Inline Fan

Carbon Filter

Ducting

Thermometer & Hygrometer

• HOUSEHOLD APPLICATIONS: Help to boost airflow in HVAC units to remove exhausts and odors from bathrooms & workshops and ventilate basements & attics, etc.
• UPGRADED ADVANTAGES: Superior balanced blades for long service life & quiet operation; Motor features a permanently lubricated bearing that operates quietly and requires no maintenance; Portable and lightweight; Sufficient 5.5' grounded power cord
• SPECS.: Diameter 4 inch, Speed 2930 RPM, Air Flow 100 CFM, Voltage 110/120V, Power 12W
• GROW ROOM APPLICATIONS: Used as intake fan to bring fresh air into grow rooms; Also used as exhaust fan in smaller setups with LEDs or Lights under 400W.
• NOTE: Max Operating Temp of Motor is 130℃ / 266℉; Max Ambient Temp is 60℃ / 140℉. If any other materials/particles get into the duct fan and get the blade stuck, users are to turn off the power immediately, clean it up, turn the power back on when handled properly.

User questions & answers

Question:	Can this be mounted vertically without harm to the motor or bearings? Answers from mfg or installation instructions only please. Thank you
Answer:	I don’t have the installation instructions anymore to reference sorry
Question:	Would this fan properly vent a 1000w hps lamp
Answer:	I am cooling two 600 W HPS lamps with a single fan and it works well
Question:	Can this fan be used to help with drafting on a wood stove? In line at top of chimney
Answer:	If you use it to move air into the stove pipe from an outside source, the fan can be outside with a duct that enters the stove pipe midway. This would act like a venturi to force air upward. Think about adding a 45 degree t to your pipe and using this fane to draw cold air from outside and forcing it upwards in the pipe. You don't waste warm air and you get a really stoked fire.
Question:	Can you hook up a speed control to this booster
Answer:	You can hook up a speed control but it does not work very good and was not designed for one. When you start cutting down the power, the fan struggles and eventually stops leaving a loud humming or buzzing sound which does not sound good for the fan and may pose a fire hazard. If you want a variable controlled fan, just buy a fan that has variable control. I made the mistake of buying variable control with this fan. I ended up buying another fan that I could use this variable control on and it is more powerful and much quieter.

Product features

VIVOSUN 4 Inch 100 CFM Inline Duct Booster Fan

VIVOSUN inline duct fan helps with ventilation issues. This duct booster fan is perfect for boosting airflow in long runs of ducting. Tight, precise construction eliminates rattling and reduces wear and tear to give the element a long life.

Features

Application Scenarios

Used as intake fan to bring fresh air into grow rooms; Also used as exhaust fan in smaller setups with LEDs or Lights under 400W.

• Designed to ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.
• Features an 8-speed manual controller utilizing PWM. See T-Series for temperature and humidity controls.
• Mixed flow design combined with an EC-powered motor for a truly quiet and energy efficient performance.
• Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware.
• Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball

User questions & answers

Question:	If powered from a switched outlet, will it remember the last speed setting or does that require constant power
Answer:	Morning RS, the S4 will not remember your fan speed. It’s a manual setting only. I also have a T4 with a smart controller and it does remember and can be set to auto for heat and humidity. The T4 is for auto exhaust and S4 is intake. If it is your only fan go with the T4. Also, if you have more than 200sf to ventilate go directly to the T6. The are very quiet which is important as my room is under a bedroom. Hope this helps.
Question:	What is the max temp of use for this fan? i see you said 240f, but all other manufacturers with plastic impellers say max temp 140f. are you certain
Answer:	Hello, The Maximum rating for that fan unit is 230 degree Fahrenheit. This is what the fans materials are rated for. Thank you for your question! Kind regards, Andrew Avila AC Infinity
Question:	What is the best way to connect this to 12 or 24 volt system
Answer:	Hi there, Thank you for reaching out to us! I'm sorry but this product would need to be plugged directly into an AC outlet to power on or you can also connect the fan to an existing digital thermal controller from the CLOUDLINE T4 model. We do not recommend hardwiring any of our products as it would deem the product out of warranty and will likely cause damage. Kind regards, Kenny Ngo AC Infinity
Question:	How well does this work with a carbon filter
Answer:	I have a 350 Cfm Coco/Carbon Fiber filter that I place on the Exit side of my application. I have tested the filter on both the intake and the exit. I found these units Push much better than they Pull. I do have to increase the power by 10% when I install the exit filter, but it's not really an issue in my application.

Product features

A Quieter and Smarter Inline Fan

The new CLOUDLINE series contains a cutting-edge Electronically Commutated (EC) motor, controlled using precise electronic pulses and smart programming. This enables the inline fan to operate considerably quieter and reach low speeds without generating noise or heat. The EC motor is also twice as energy-efficient and can save up to 40% in energy costs, paying for itself in the long run.

Smart Programming

T-series models include a programmable controller with precise temperature and humidity sensors located on the 12-foot corded probe.

Quiet PWM Motor

Each fan uses a quiet, energy-efficient EC motor controlled using Pulse Width Modulation (PWM). Dual ball bearings allow for omnidirectional mounting.

Mixed-Flow Design

Featuring a mixed flow design, the fans maintain peak performance in high static pressure environments. Ingress-protected against dust and liquids.

Plug and Play

The complete kit includes the inline fan unit, controller, user manual, and everything needed to mount the fan and power it through an outlet.

CLOUDLINE 4-Series

A CLOUDLINE T4 plus CLOUDLINE S4 system can be linked to the same smart controller, and used in conjunction for a total of 410 CFM airflow. This set-up is ideal for ventilating smaller grow tents and cooling AV rack cabinets.

CLOUDLINE 6-Series

A CLOUDLINE T6 plus CLOUDLINE S6 system can be linked to the same smart controller, and used in conjunction for a total of 804 CFM airflow. This set-up is ideal for large grow tents, AV closet cooling, and boosting airflow for HVAC projects.

MIX and MATCH

The same controller can connect CLOUDLINE fans of different sizes, to share the same programming. For example, an exhausting CLOUDLINE T6 with a filter can share the same controller as an intaking CLOUDLINE S4, to balance static pressure.

• POWERFUL AIR FLOW FAN: Heavy hitting blower with a fan speed of 2300 RPM for an air flow of 190 CFM, Puts out only 31 dB noise level. Moves air through your target location efficiently for optimal ventilation
• SUPERIOR CARBON FILTER: 1050+ RC 48 Australian Virgin Charcoal Bed. Dimensions: 4" x 14"
• EFFECTIVE ODOR CONTROL: The carbon filter eliminates some of the most undesirable odors, pungent smell and particulates from indoor grow tent, hydroponics grow room.
• FREE PRE-FILTER INCLEDED: We recommend replace the pre-filter every 6 months or after completion of each grow cycle.
• VERSATILE APPLICATIONS: Kitchens, Bathrooms, Greenhouses, Grow Rooms, Grow Tents, etc

User questions & answers

Question:	Can the blowing direction of the fan be inverted with the switch or works only in one direction? I see the filters does, it works for intake/exhaust
Answer:	china
Question:	Will this work and be powerful enough for a 2x4x5 grow tent
Answer:	Hi, in Anti-Freeze mode, the unit keeps the room at a temperature of 45°F to prevent freezing temperatures. Eco Mode; the appliance will automatically set the power level to guarantee the best comfort reducing energy consumption. In this operating mode, the unit may switch the heating power level from maximum to minimum and vice versa, several times in an hour. When using the ECO function, the maximum temperature setting is 79°F. To activate this function, press the ECO button. Thank you!
Question:	Will this for sure cool down my tent ? I have 300w light, I raised it but still 3-5 degrees too hot, please help
Answer:	No, it is for the amount of time you want it to run before shutting off
Question:	Can you provide a transformer to be able to run in a 240v environment? for New Zealand
Answer:	Doubtful. This heater starting malfunctioning on me less then 1 year after getting it. It would shut off with out notice. I assume it was overheating. Not a very reliable model. I ended up getting a dyson hot+cold afterwards and it's been good (Expensive but seems to be built like a tank).

Product features

Inline Fan

• Energy efficient & quiet operation
• Lightweight & super easy to install.
• Balanced blades are ideal for boosting air supply and venting exhaust air.
• Engineered for maximum boost with minimum noise.
• Motor features a permanently lubricated bearing that operates quietly and requires no maintenance.
• Solve air delivery problems without major system rework or expense.
• Can be installed in any location, such as greenhouses, tents, etc.

Carbon Filter

VIVOSUN Carbon Filters are perfect for the following applications:

• Grow tents, cupboards and cabinets.
• Anywhere without a roof/ceiling cavity to displace extracted air into.
• Air-cooled lighting.
• Lower-level floors of double/triple story houses.
• Window to window ventilation applications.
• Hot or cold "filtered air transfer" from one air conditioned room to another.

Inner & Outer Mesh

Provides a 53% open area which allows for increased air flow.

Reversible Flange & Base

Intended for longer service life, up to 2 years in life expectancy.

Two Belts

Included in the package.

• POWERFUL AIR FLOW: Heavy hitting blower with a fan speed of 2450 RPM for an air flow of 440 CFM. Moves air through your target location efficiently for optimal ventilation.
• RUNS SMOOTH AND QUIET: Powerful fan puts out only 50 dB noise level.
• DURABLE BUILD: Galvanized steel parts come factory painted to resist atmospheric corrosion from humidity. Tight, precise construction eliminates rattling and reduces wear and tear to give the element a long life.
• HIGH TECH DESIGN: The aerodynamically designed centrifugal impeller of this unit delivers strong air flow with a disproportionately low sound profile.
• VERSATILE APPLICATIONS: Ideal for cooling lighting fixtures or controlling hot and humid conditions in grow tents/rooms. NOTICE: Without speed controller.

User questions & answers

Question:	Does this have a UK plug
Answer:	No, just american 120v flat 2 pin plug
Question:	Can i use this with my own fan control? ie i want to put it on wifi switch with dimmer so i can adjust speed
Answer:	It's a regular induction motor with no special circuits. If you can control a box fan or ceiling fan with the same method I don't see why you cant do it here.
Question:	What's the depth of the fan? It shows height and width but not depth
Answer:	About 6"-8"
Question:	my fan is starting to make noise..is it possible to take it apart and grease the bearings
Answer:	It could be the fiber washers need replacing. The fan can be easily disassembled. I like to use 3 in 1 oil on all metal contact parts (sparingly). Just like any machine, these need proper maintenance. Be sure to DISCONNECT POWER before doing anything.

Product features

VIVOSUN 6 Inch 440 CFM Inline Duct Fan

VIVOSUN inline duct fan helps with ventilation issues. This fan is built durable, runs smooth and quiet. Tight, precise construction eliminates rattling and reduces wear and tear to give the element a long life.

Powerful but Quiet Airflow

1. Heavy hitting blower with a 440 CFM capacity
2. Fine-tuned for minimum vibration
3. Fan speed of 2450 RPM moves air through your target location efficiently for optimal ventilation
4. Add a compatible 6-inch VIVOSUN silencer to your system to handle noise from displaced air and further reduce the total noise level from your ventilation system

• EFFECTIVE VENTILATION: Powerful blower with a fan speed of 2300 RPM for an air flow of 190 CFM. Moves air through your target location efficiently for optimal ventilation
• SUPERIOR CARBON FILTER: 1050+ RC 48 Australian Virgin Charcoal Bed. Dimensions: 4" x 14"
• EFFECTIVE ODOR CONTROL: The carbon filter eliminates some of the most undesirable odors, pungent smell and particulates from indoor grow tent, hydroponics grow room.
• STURDY DUCTING+ 2 Stainless Clamps: Strong, flexible steel wire supports heavy duty triple layer duct walls.PET core is sandwiched in layers of fire-retardant aluminum that can handle temperatures from -22 to 266 Fahrenheit.
• ADVANCED MADE EASY: Don’t waste time buying and returning parts that may or may not be compatible or safe to use together! Three-part system includes every part you need to get set up.

User questions & answers

Question:	Whats the hottest environment it can operate in
Answer:	Nope!
Question:	What is the decible level of this fan running
Answer:	It require 100 volts so needs a transformer to work properly.,
Question:	Will this work well for a 32x32x63 tent? How many inches long is this fan and carbon filter put together? filter put together
Answer:	No it’s for only 110v. You can buy it from Korea or EU seller for220v.
Question:	Does it have variable speed
Answer:	Dear Customer Hello, Thank you for contacting me. The capacity is 1 liter. Best regards MA2_JAPAN

Product features

Inline Fan

• Energy efficient & quiet operation
• Lightweight & super easy to install.
• Balanced blades are ideal for boosting air supply and venting exhaust air.
• Engineered for maximum boost with minimum noise.
• Motor features a permanently lubricated bearing that operates quietly and requires no maintenance.
• Solve air delivery problems without major system rework or expense.
• Can be installed in any location, such as greenhouses, tents, etc.

Carbon Filter

VIVOSUN Carbon Filters are perfect for the following applications:

• Grow tents, cupboards and cabinets.
• Anywhere without a roof/ceiling cavity to displace extracted air into.
• Air-cooled lighting.
• Lower-level floors of double/triple story houses.
• Window to window ventilation applications.
• Hot or cold "filtered air transfer" from one air conditioned room to another.

Inner & Outer Mesh

Provides a 53% open area which allows for increased air flow.

Reversible Flange & Base

Intended for longer service life, up to 2 years in life expectancy.

Two Belts

Included in the package.