10 best behringer audio amplifier

Product description

If you're tracking more than one musician at once, or if everyone in a group wants to listen to a playback, you need a monitor distribution system. The compact, flexible HA400 can power up to four pairs of headphones and up to four independent volumes.

A Simple Solution

Grab this super-compact amp during your sessions to power practically any headphones--four of them at the same time, to be exact. This allows four people in your studio to listen to the main mix while recording, and each listener can determine their own volume level using the dedicated output level controls.

Quality Amplification

The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. These ultra-low-noise 4580 operational amplifiers are included for outstanding audio performance--the same op amps found in "full-size" audio equipment.

What's in the Box

Behringer HA400 4-Channel Stereo Headphone Amp, Power Adapter, User's Manual

• Ultra-compact headphone amplifier system for studio and stage applications
• 4 independent stereo high-power amplifier sections
• Highest audio quality with virtually all types of headphones even at maximum volume
• Phones Level control per channel
• DC 12 V adapter included

User questions & answers

Question:	Does this just split the audio, or does it actually "drive" headphones? If so, how many Ohms can it handle
Answer:	No. This is an 8 channel headphone amp. It simply increases the response of multiple headsets used at one time, to boost the output of each headset in a recording studio setting.
Question:	How do I use this with my laptop? I got male extensions but it doesn't seem to be working
Answer:	We use inputs on the front of the panel and at the same time use some of the ins on the rear panel and it works fine. No issues with volume. Overall a good product for the small amount of money we paid for the item.
Question:	is this just for volume control, or does it actually amplify bass, highs, lows, etc
Answer:	Yes. Just run ear buds with an adapter
Question:	does it come with the extender cord? compatible with M-Audio fast track - cord from the existing headphone jack to amp
Answer:	Hello, to the best of my knowledge, a 220v version is not available in the US. I could not find a specification in the amplifier. A lot of power amps use universal power supplies that allows a voltage from 110 to 220 @ 60 or 50 Hz to be allowed. Usually that specification is marked on the amplifier at the AC input. I don’t see that on the power amplifier images. Hope this helps.

Product features

Behringer Microamp HA400 Ultra-Compact 4

MICROAMP HA400:

If you're tracking more than one musician at a time, or if everyone in the group wants to listen to the playback, you’re need a monitor distribution system. A distribution system allows everyone to listen in, and control the volume of his or her own headphones. The compact and flexible HA400 can power up to 4 pairs of headphones and up to 4 independent volumes, with outstanding audio quality – even at maximum volume!

Altogether Now:

You can use this super-compact stereo headphone amplifier with practically any headphones – four of them at the same time, to be exact! Let up to 4 different people in your studio listen to the main mix while recording, and each listener can determine their own preferred volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are employed for outstanding audio performance – these are the same op amps found in “full-size” audio equipment – plus, a dedicated 12-Volt DC adapter is included.

Great Sound, Great Value:

When a recording session calls for everyone's heads – and ears to be in the game, the HA400 is the perfect solution – and a real money-saver! Let your ears guide you by checking out the amazing HA400 at a BEHRINGER dealer near you – or get yours online today.

Product description

Delivers 4 x 1600 watts into 2 ohms, 2 x 3000 watts into 4 ohms and weighs less than 13.4 lbs/ 6.1 kg Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Built-in stereo crossover with low-cut, high-cut and full range Mode Smartsense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance

• Delivers 4 x 1600 watts into 2 ohms, 2 x 3000 watts into 4 ohms and weighs less than 13.4 lbs/ 6.1 kg
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Built-in stereo crossover with low-cut, high-cut and full range Mode
• Smartsense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance

User questions & answers

Question:	Hi.. does the behringer power amplifier nx4-6000 come in 220-240 v electrical power
Answer:	No, for that you need a power-amp/mixer. This is just a mixer.

Product description

When it¡¯s time to make recording history, you need the best audio interface you can get ? and you need one you can count on. That¡¯s why we¡¯re kicking it up a notch with the amazing UMC22, an ultra- compact 2 x 2, 24-Bit/48 kHz USB audio interface with a professional- grade MIDAS-designed Mic Preamp, combination XLR/TRS input for your vocal and direct instrument input (no DI required) and an additional 1?4"strument Input. The rich feature- set, which also boasts a powerful Phones Output for the Direct Monitoring of your session, plus 2 Outputs and USB-supplied power ? makes the UMC22 the best, and most-portable recording interface in its class!!in

• 2x2 USB audio interface for recording microphones and instruments
• Audiophile 48 kHz resolution for professional audio quality
• Streams 2 inputs / 2 outputs with ultra-low latency
• MIDAS designed Mic Preamplifier
• Powerful Phones output with Level control and Direct Monitor select

User questions & answers

Question:	Are these sturdy, good quality
Answer:	The picture that comes up here says it’s “herbal” & that’s the one I’ve been using since the late 1970’s. It has a very nice light fragrance that is not overpowering. But there is one that is fragrance free.
Question:	Will this work for this type of microphone neewer nw-700 professional studio broadcasting recording condenser microphone
Answer:	No idea. It happens often I think. It shouldn't be much more expensive from your local health food store. FYI, The company behind organic and natural personal care brand Nature's Gate has filed for chapter 11 protection. Natural Products Group filed for bankruptcy at the end of last month although it expects to exit chapter 11 in between 45 and 50 days.Feb 9, 2010

Product description

BEHRINGER UMC404HD Audiophile 4x4, 24 - Bit/192 kHz USB Audio/MIDI Interface with MIDAS Mic Preamplifiers.

• 4x4 USB 2.0 Audio/MIDI interface for recording microphones and instruments
• Audiophile 24 - bit/192 kHz resolution for Professional Audio quality
• Compatible with popular recording software including Avid Pro Tools, Ableton Live, Steinberg Cubase, etc.
• 4 state - of - the - art, Midas designed mic preamplifiers with +48 V phantom power

User questions & answers

Question:	Does it come with rack ears
Answer:	No, USA only - 105 -120 volts. Sorry
Question:	Can this be used standalone as a mixer without a computer
Answer:	Yes, it is global to all inputs. I stand corrected . It only affects the three mike/line channels.
Question:	Can you plug RCA input into this? or is it only rca out
Answer:	ART makes some great devices. I like this design, but I would eschew this one for the Behringer Ultralink Pro 8 Channel Splitter/Mixer Model MX882 more flexibility at a lower price. But if it is the SGX 2000 Express you are after, that's out of production but a great unit.. try Reverb.com
Question:	Can you plug a single stereo 6.35mm cable into one of your 4 inputs, and will it stay stereo
Answer:	Charlie, you are able to add external effects such as reverb or delay via the FX loop. You send the signal out of the MX622, and into the effect unit, then return it back thru the RETURN inputs on the MX622. Please let us know if we can assist you with anything further, thank you!

Product description

• Ultra-compact headphone amplifier system for studio and stage applications
• 4 independent stereo high-power amplifier sections
• Highest audio quality with virtually all types of headphones even at maximum volume
• Phones Level control plus accurate 6-segment LED output meter per channel for easy level monitoring
• 2 balanced stereo main inputs with independent Level and Balance controls for individual mixes, selectable for all 4 headphone amplifiers

User questions & answers

Question:	Does it have an on and off switch. Also is the input a balanced 1/4" or Do I need to insert a 1/4 for left and another for the right side
Answer:	Hyaluronic acid is not listed. However, it does list sodium hyaluronate tocopherol (vitamin E).
Question:	I want to feed the headphone signal from my stereo source to this unit and amplify 4 head phones plugged into this unit. Will this unit amplify the head phone signal coming from the head phone jack on the stereo source (stereo receiver
Answer:	Interesting question. I use the lotion for my legs as I'm a diabetic. Maybe organic would be better as I associate vegan with edible products. However, from the label Vegan, Gluten Free, Paraben Free, Non GMO (per suppliers), Soy Free, Mineral Oil Free, Petroleum Free, Butylene Glycol Free and Cruelty Free.
Question:	Is there a warranty that comes with the purchase of this product through Amazon
Answer:	yes
Question:	Can I use this thru the TV
Answer:	Yes, as the description mentions, 2 bottles come. I hope this help.

Product description

4 x 75 Watts into 4 Ohms; 4 x 50 Watts into 8 Ohms

• 4 x 75 Watts into 4 Ohms; 4 x 50 Watts into 8 Ohms
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption
• Independent limiters for each channel offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity

User questions & answers

Question:	hi does anyone know if this amp could run 4 aura pro bass shakers or 4 buttkicker mini lfe
Answer:	Hi Steven, did you ever try this out? I'm also considering using this amp to run 4 Aurasound AST-2B-4 shakers. I am also considering the Pyle PT8000CH 8-channel amplifier to run 8 shakers as it will save me ~$100 in the long run.
Question:	Can this work for a small restaurant, 4 sets of speakers? what else would I need to buy to set up a system (am no music xpert, as you can tell
Answer:	The amp has 4 zones and 4 inputs. (One input to each zone independently controlled or almost like having 4 separate single channel amps in one) You may have to use a splitter on your audio source (Example MP3 player) to hook up to each input (Like a "Y" Adapter)The amp is pretty nice if this is what your needing it for. I used it to install in a customers house for multi room control.Note* System also has 1/4 mono audio inputs (Not RCA) and the outputs use Speacon adapters to speakers themselves. (Not a big deal, just need to be aware that you will need these adapters to terminate cable)Hope this Helps!
Question:	Will this item work in the UK, on 220-240vs
Answer:	Not sure about this.
Question:	Mine creates a visible spark and a loud pop whenever turned off. Is this normal, or is this a faulty device
Answer:	I don't remember that ever happening with mine (I don't have it anymore). Are you turning if off first, before anything else? I believe the order of turning audio gear off is 1. amp. 2. everything else.

Product description

Package Includes: Behringer iNUKE NU12000 Ultra-Lightweight 12000 Watt Power Amplifier Class D Amp Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper Description: The iNUKE NU12000 power amplifiers packs an incredible 12,000 Watts (2 x 6,000 Watts @ 2 Ohms; 2 x 3,400 Watts @ 4 Ohms; 2 x 1,700 Watts @ 8 Ohms) into exceptionally lightweight (26.5 lbs/12 kg) and rack-mountable packages. Because the NU12000 is so much more efficient than conventional designs, it runs cooler and doesn’t require the massive heat sinks and heavy toroid transformers typically associated with its conventional counterparts. Thanks to our “Zero- Attack” limiters, which offer maximum output level with exceptionally- reliable overload protection, you can run the NU12000 full-out for hours on-end. Our revolutionary high-density Class-D technology, combined with ultra-efficient, switch-mode power supplies, ensures this feather-light powerhouse will drive your rig effortlessly for many years to come.

• Features: Delivers 2 x 6000 Watts into 2 Ohms, 2 x 3400 Watts into 4 Ohms, 2 x 1700 Watts into 8 Ohms and weighs less than 26.5 lbs / 12 kg Ultimate reliability through revolutionary cool-running High-Density Class-D technology with "near-zero" thermal buildup Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption Front panel LCD display enables setup and adjustment without PC
• Can be set up, controlled and monitored via front panel USB connector. Powerful remote software downloadable at behringer.com "Zero-Attack" limiters offer maximum output level with reliable overload protection Built-in Subwoofer/Satellite crossover for perfect subwoofer operation Detented and illuminated gain controls for precise level setting Precise 4-segment Signal and Limit LEDs to monitor performance XLR and 1/4'' TRS combination input connectors for compatibility with any source
• Professional twist-lock speaker connectors for ultimate reliability Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show “Back-to-front” ventilation system prevents thermal buildup for reliable operation Delivered with Neutrik* powerCON 32A* twist-lock connector (cable not included) 3-Year Warranty Program* Designed and engineered in Germany

Product description

Behringer A800 professional 800 Watt reference class power amplifier. You deserve the very best when it comes to your studio power amplification. Experience 800 Watts of love at first sound. Audiophile-grade performance, ultra-reliable and undeniable affordability – the Reference Amplifier A800.

• Ultra-linear power amplifier for recording studios, post-production, live sound and HiFi application
• 2 x 400 watts into 4 ohms, 800 watts into 8 ohms in Bridged mono operation
• Ultra-low Impedance design can drive virtually any passive speaker such as studio monitors, etc
• Advanced convection-cooling for absolutely noise-free and stable operation
• Precise level meter and clip indicators for accurate performance monitoring

User questions & answers

Question:	Is this amplifer 120v
Answer:	Yes
Question:	how wide is it not accounting for the rack mount mounts
Answer:	Not including the rack mounts, the case is 17" wide; but about 1/2" behind the rack mount is a set of round screw heads in the case on both side, so to be safe, I would say that width is 17.25" .
Question:	Can I use a bass preamp to drive this amp
Answer:	I'm using the amp in a home environment but it sounds great. Not sure how rugged it will be as a gig amp. Has inputs for RCA jack, Phone plug, and XLR, and outputs on Binding Posts and Speakon connectors. Should be good to go. Just make sure you don't overload the input.
Question:	Bridged watts rms vs peak? Looking to hook up a big sub is the 800 watts peak or rms
Answer:	This amp doesn't deliver 800 watts. As close as I can tell it's about 275 watts 4 ohm x 2 . So maybe around 550 watts bridged.

Product features

A800

Professional 800-Watt Reference-Class Power Amplifier

• Ultra-linear power amplifier for recording studios, post-production, live sound and HiFi application
• 2 x 400 Watts into 4 Ohms, 800 Watts into 8 Ohms in bridged mono operation
• Ultra-low impedance design can drive virtually any passive speaker such as studio monitors, etc.
• Advanced convection-cooling for absolutely noise-free and stable operation

• Independent DC, LF and thermal overload protection on each channel automatically protects amplifier and speakers
• Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption

Reference Amplifier

The Reference Amplifier A800 is the ideal choice for home and professional recording studios, post-production suites, or anyone seeking audiophile-grade performance – without the audiophile-grade price tag! A professional 800-Watt ultra-linear power amplifier, the A800 provides stunningly-accurate audio reproduction – without the slightest hint of distortion or artificial coloration common to many competing products. Thanks to its ingenious servo-controlled design, and the high-level components used throughout, the A800 boasts remarkable specs and unrivaled sonic performance.

The A800 Really Delivers

Professional audio engineers the world over are impressed by the A800’s performance – and surprised by its affordability. Capable of delivering 2 x 400 Watts (4 Ohms) and 800 Watts 8 Ohms in bridged-mono mode, the A800 exhibits massive headroom for the utmost in pristine audio reproduction. The A800’s advanced convection-cooling technology ensures stable, noise-free operation – while the servo-controlled design allows it drive virtually any passive speaker system.

Metering and I/O

A precise level meter with input clip and channel protection LEDs are provided for accurate performance monitoring. Input connections are provided in the form of balanced XLR and 1/4" TRS connectors, as well as unbalanced RCA sockets, ensuring you have loads of input options. Plus, the speaker outputs give you the choice between professional twist-lock and binding post connectors.

Class-D - Massive Power, Perfect Sound

Thanks to our High-Density Class-D amplifier Technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency – and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

SmartSense Impedance Compensation

Our new SmartSense Technology puts the punch back into Class-D amplification, providing vastly improved full-range frequency response with more powerfully-dynamic bass, and smoother high-frequency reproduction. The resulting output is no longer dependent on the actual load, but is rendered perfectly ruler flat via impedance compensation. A800's design also incorporates a significantly-higher damping factor that yields better amplifier control over the loudspeaker for stronger audio reproduction – especially in the LF area.

Superior Sound Quality

You deserve the very best when it comes to your studio power amplification. Experience 800 Watts of love at first sound. Check out the A800 at your authorized BEHRINGER dealer, or place your order online today!

Audiophile-grade performance, ultra-reliable and undeniable affordability – the Reference Amplifier A800.

Product description

BEHRINGER KM750 Professional 750-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response).

• 2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Precise power, signal and clip LEDs to monitor performance
• XLR, 1/4'' TRS and RCA input connectors for compatibility with any source

User questions & answers

Question:	Can i drive Bose Acoustimas 5 stereo speakers with this power amp
Answer:	The Acoustimas speaker system utilizes a built in amplifier within the bass speaker that powers the smaller satellite speakers. Essentially any power from this amplifier is filtered by the Acoustimass bass speaker before powering your smaller speakers. You would be better off exploring stereo receiver/amplifiers from Onkyo, Denon, Sony, etc, that have more features than a simple amplifier such as this.
Question:	Can this be used as bass amplifier with a head as preamp
Answer:	I'm guessing you are asking about a bass guitar? & yes it should be fine if the speaker "cab" is not going to ask for more than 3-400 watts? You are in the pro category & can find help from the pro's @ Sweetwater which is where I bought mine from.
Question:	Can i plug an rca device and an xlr device in the input at the same time? can the xlr be a mic, or do i need a preamp
Answer:	technically yes, but i wouldnt recommend it. part of the signal will go through, but it will be massively distorted and far quieter than it should be. it might also damage the amp and/or your devices plugged into it. as far as using it for a mic, you will almost certainly require a pre-amp unless youre going through an EQ or effects chain before the amp, in which case youll probably be fine.
Question:	I have a Crown cdi1000. Each channel driving 4 x 8-ohm speakers - too complicated. Will this work in place
Answer:	Yes

Product features

BEHRINGER KM750, Black

• 2 x 400 Watts into 4 Ohms; 2 x 200 Watts into 8 Ohms; 750 Watts into 8 Ohms (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Precise power, signal and clip LEDs to monitor performance
• XLR, 1/4'' TRS and RCA input connectors for compatibility with any source
• Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
• Independent DC and short circuit protection on each channel automatically protects amplifier and speakers
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• Active cooling on heatsink
• "Built-like-a-tank" impact-resistant, all-steel 2U rackmount chassis

KM750

The remarkable KM750 packs a heart-stopping 750 Watts of output power into a lightweight (18.7 lbs/8.5 kg) package, thanks to our Accelerated Transient Response (ATR) technology. Ample power (750 Watts in Bridge mode; 2 x 400 Watts @ 4 Ohms; 2 x 200 Watts @ 8 Ohms) and high-tech efficiency combine, giving you a supercharged workhorse

Accelerated Transient Response Delivers the Knockout Punch

It takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That’s called Transient Response and it’s the holy grail of amp design. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, our amps are able to react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

Instead of operating relatively continuously like most power amps, the KM750 features rail tracking for effectively modulating the power supply rails with only the peaks of the input signal. This technology has revolutionized pro audio amp designs with its outstanding performance and efficiency.

Sublimely Simple Operation

The front panel controls and indicators provide your system’s vital signs at a glance. After pressing the Power button, the Power LED lights to show the amp is ready for action. All channels feature positive-detent Gain controls with Signal LEDs that light when a signal is present, as well as Clip LEDs that alert to reduce the input signal.

Just as elegant as the front, the rear panel is home to balanced XLR and ¼ " TRS, plus unbalanced ¼ " TS and RCA connections. Take your pick of professional locking speaker Outputs or touch-proof binding posts to securely connect speakers. The same panel contains the switches that put the KM750 in Mono, Stereo (two channel mode) or mono Bridge mode. Flick the Limiter On/Off switch to activate the built-in overload protection.

Product description

• Ultra-compact monitor headphone amplifier for studio and stage applications
• Personal ''more me'' mixer – mix a mic plus a monitor signal and hear them via headphones
• Flexible Mic In and Mic Through connectors plus Ground Lift switch
• Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
• High-power headphone output on 1/4'' and 1/8'' jack connectors

User questions & answers

Question:	Has anyone used this with a DI box in front of this unit and then plug in to this unit? For example, guitar->di box->this unit, if so did it work
Answer:	@guitar->di box->this unitLate to the party here, but other potential buyers might want to know...A DI box basically converts the unbalanced instrument level signal to a balanced mic level signal. So this should work using the Micromon's xlr input.. not the 1/4". So in this situation you may use the Micromon's xlr thru-put out to a mixer channel. Furthermore you could also use the DI box's parallel 1/4" jack to feed a guitar amp... but in that case why do you need to hear it in a pair of headphone's or iem's as others have pointed out).BUT what this unit is intended to do is let to run your mic thru (in and out of) it for extra "just me" monitoring while also receiving a normal monitor/aux send mix from the mixer into the Micromon's 1/4" input. There are other, creative uses for this unit but just know that you results may very when you use any piece of equipment in a way in which it was not intended. And yes, you likely do need to monitor an acoustic guitar if you are on a noisy stage with drums, electrics etc. The ambient sound from the guitar alone is rarely enough in a "band" situation. But at the end of the day, imo, you'll get better results and keep things simpler if you just use a simple stage monitor/wedge. Hondo.
Question:	Does this serve the same purpose as the Behringer MX400 Micromix 4 Channel Line Mixer in a way if I can get the signal to be stereo? thanks
Answer:	You can get stereo output. Inputs however are one balanced 1/4" and the second is XLR. It's a great personal mixer and I use it every time I play live. I run the board mix into the 1/4" and then direct from my Line6 X3 Live into the XLR (Mic) input.
Question:	I want to know if these would be good for all of my players in my praise and worship band. We play new style of worship
Answer:	I don't use mine for playing out just for practice but the worship team at church uses two, lead guitar and drums.Mine works great for practice also.
Question:	Can wireless headphones be used with this amp
Answer:	I'd say any type of headphone can go into this amp. It has a quarter inch as well as 3.5mm jacks. All you need to do is plug it up properly and you'll have sound.

Product features

Micromon MA400

The ultra-compact Micromon MA400 is the ideal personal monitor mixer for the performer who is always asking for 'more me.' Featuring a flexible Mic In and Mic Thru connectors and Ground Lift switch, as well as stereo Monitor input with a dedicated Monitor Level control and Mono/Stereo switch, the MA400 has everything you need to satisfy even the most-demanding performer on stage.

Connections

The MA400 features XLR Thru jacks and provides superb noise-free operation. Just connect to the Mic Input and send a line from the Mic Thru to your main mixer. You can even use studio-grade condenser mics, as the MA400 will pass +48 V phantom power, if your mixer is so equipped. The Phones jacks accept both ¼ " and 1⁄8" headphone and earbud connections, making the MA400 ideal for hardwired IEM (in-ear-monitor) applications, such as singing drummers and keyboardists. The MA400 comes with a dedicated 12 V DC power supply and an LED to indicate when it is powered up.

Masterful Monitor Mixing

Capable of either stereo or mono operation, the MA400 is a powerful little mixer that allows you to control two independent sources, such as a microphone and the monitor feed from your main mixer. Simply adjust the MA400‘s Monitor Level control.

Small and Superb

The MA400 is an ideal cure for the 'more me' syndrome – both onstage and in the studio. With its flexible routing options and a high-powered headphone output – the MA400 makes an excellent studio tool. Small enough to fit in your pocket with a price tag to match! Check out the Micromon MA400 at your Behringer dealer, or get yours online today – everyone in the band will thank you!