13 best pop filters

• DUAL-LAYER POP FILTER: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings.
• ADJUSTABLE GOOSENECK: The steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice
• CLERAER SOUND: Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P". It is a great item for singers, streamers and actors alike who want help achieving the best possible performance and help protect the spitting all over your personal microphone
• WIDE COMPATIBILITY: Adjustable screw rotating clamp with scratch-proof gripper can secure variety tubular mounting booms or microphone stands. Eliminates anyone's extra elements that prevents them from recording/projecting their best vocals to the public or their audience
• DRAW THEM IN - NOT TOO LOUD, NOT TOO QUIET- WHILE MOST Blue Yeti Microphone Filters are no better than DIY mesh pop filters, Auphonix Surface Spacing acts like an AMPLIFYING MODIFIER, toning down those overly excited moments that make your voice sound brash, without turning a whisper into silence during those “Quiet Spoken Secrets” moments when you need to REEL YOUR AUDIENCE IN.

User questions & answers

Question:	Will this work with condenser microphones
Answer:	My daughter uses it with her Blue Yeti. Not sure about the Yeti X but it is adjustable.
Question:	Does it work on a CAD audio microphone
Answer:	I believe you would get that through the manufacturer or if you’re lucky enough to have a fish/ pond store near you, they can probably order it
Question:	Will this work for Razer Seiren X
Answer:	No. There is not an option to turn off the uv light while running the fountain.
Question:	Will this fit on the yeti x
Answer:	Yes. It would be easy to do. You would have to buy a piece of tubing to extend it, but the motors are certainly powerful enough!

Product description

Features: New generic Studio Microphone Mic Wind Screen Pop Filter Mask Shied Essential item for recording, speaking or singing. It will help to ensure that your tracks are audible and easy to understand. And also it will make sure your message loud and clear, and banish the dreaded hissing and lisping sounds that come when pronouncing the letter "s" and the explosion of air that follows "b" and "p" with this microphone pop screen. Double layer, convenient and easy use. Protects your microphone from surplus spit caused by over eager performers. 360° flexible gooseneck holder, convenient for use. Swivel mount for easy installation. Adjustable clamp fixes securely to any mic stand. Goose neck for precise positioning. It can also protect the microphone from the accumulation of saliva. Commonly used in a recording studio. Package contents: 1x Studio Microphone Mic Wind Screen Pop Filter Mask Shied

• DUAL-LAYER POP FILTER: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained to produce great quality recordings
• ADJUSTABLE GOOSENECK: The steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice
• CLERAER SOUND: Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P". It is a great item for singers, streamers and actors alike who want help achieving the best possible performance and help protect the spitting all over your personal microphone
• WIDE COMPATIBILITY: Adjustable screw rotating clamp with scratch-proof gripper can secure variety tubular mounting booms or microphone stands. Eliminates anyone's extra elements that prevents them from recording/projecting their best vocals to the public or their audience
• EASY OPERATION: Swivel mount for easy installation, removal and location adjustment. Note: Microphone is NOT included.

User questions & answers

Question:	Does this work for the razer seirin
Answer:	This will only fit if you have mic stand for your snowball microphone.Because it will only connect to the stand not on the mic.
Question:	Is ithis one made of two layers of nylon? i bought a brand called dragonpad, it's made of 2 layers, i could still hear a lot of pops which sucks
Answer:	I have been told that it will work with a condenser microphone, by someone I trust, though my microphone was just ordered, so I have not yet tested it out. Blue Yeti is a condenser microphone, so it should not be a problem.
Question:	What is the diameter size? how many inches
Answer:	It does !! It works very well in those microphones. I recommend this filter mask . You can get it over price in different shops around the USA .
Question:	Would this fit to a blue snowball ice condenser microphone
Answer:	Yes

Product features

Neewer 6 inch Microphone Wind Pop Filter

• Protect your microphone from surplus spit caused by over eager performers. It can also protect the microphone from the accumulation of saliva.
• Double Layer: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, then it passes the second screen, the blast is easily contained to produce great quality recordings.
• You can adjust the angle and distance between the screen and the microphone to best meet your needs.

Broadcasting Studio

Personal/Home Studio

Recording & Production

Radio Station

• ▲▲NOT FOR BLUE YETI▲▲ WIDE APPLICATIONS - Our microphone pop filter suitable for 45 mm to 63 mm diameter microphones such as AT2020, AT2035, AT4040, AT2050, AT2020+, Samson Meteor , Scarlett CM25 ,CAD GXL2400, Apogee, Razer Siren X, BADAAX Mic, Rode NT1A, Rode NT-USB, MXL 770, MXL 910, MXL 2010, CAD U37, BM-800 and many other microphones.
• THREE LAYERS FILTER MIC SHIELD - Three layers design include foam layer, metal net layer and basic etamine layer can effectively reduces the plosive, pops, crackles, wind interference, breath sounds when recording vocals. Absolutely necessary for recording, speaking or singing. This studio mic shield isolation helps to get your best vocal recording.
• MAINTAIN CLEAN - Metal mesh matches plastic frame in a special appearance design. Functionally prevents saliva, keeping cleanness for your microphones and protecting your microphone.
• EASY TO SET UP - Handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones.
• PACKAGE & GUARANTEE - 1 X Pop Filter(microphone is NOT included).

User questions & answers

Question:	will a thin sock over a mic work just as well
Answer:	Yes, it fits to Fifine Technology's usb/pc microphone
Question:	Will this fit the new hyperx quadcast mic? it looks like it should but, always worth asking
Answer:	if u are using a boom yes if not i am not sure
Question:	Does this work for the blue yeti
Answer:	Yes this has double layers. Maybe you could use an additional windguard on the mic itself.
Question:	will this fit Fifine Technology's usb/pc microphone
Answer:	I'm not sure what diameter you are talking about but all of the attachments are tighten to fit. As for the Shock mount of the stand, I couldn't fit my Blue Yeti mic and had to use the screw on attachment option, which is an okay solution. It fits a regular sized mic about 6-7 inches in circumference. The shock mount is also a squeeze fit mount so anything around that size is safe.

Product features

IMPORTANT ATTENTION: NOT Fit Blue Yeti Mic

PEMOTech Black Mic Windscreen is designed for 45 mm to 63 mm diameter handheld microphones. It is more effective in protecting your microphone against wind interference, breathe sounds, popping noises, singers' spit or other harmful dust and moisture, keeping your microphone clean and helping extend its lifetime. It's also an excellent choice for improving the sound quality of KTV, dance ball, vocals, podcasting, Youtube videos, ASMR videos, gaming streams, voiceovers, conference calls, interviews and stage performance, etc.

• 10Pack Microphone Windsreen Cover - 2.9 x2.3 inches with Caliber Size is 1.4 inches, compatible with most standard handheld microphones in market. (Note-Not for Headset Mic)
• Higher Density Microphone Cover- Thick and soft foam covers, Better protect your microphone from wind interference and other noises even in strong wind condition. Suitable for indoor activity like ktv, dance ball, conference room, news interviews, stage performance and outdoor activity like news report, sports.
• 10 Different Colors- Black,Red,Deep Red,Yellow, Purple, Midnight Blue,Aquamarine Blue,Rose Red,Grey,Orange.Easliy differentiate each microphone by using these microphone covers. Each microphone windscreen cover is packed seperately in a plastic bag so the color do not bled.
• Clean and Sanitary: These mic wind covers can keep your microphone away from bacterial by avoiding dust, moisture and spit, allow you to use the mic in an ease and comfortable mood.
• Attention: the foam microphone covers was squeezed in a bag(seperately), but they have excellent elasticity and shrinkage. When you receive the mic covers, please put them out for a little time then it will return to its original shape.

User questions & answers

Question:	Do these fit on a Blue Yeti mic
Answer:	Yes
Question:	Will these fit a Shure 545SD without being too big/loose
Answer:	No. Pantyhose over a metal coat hanger will work almost as well... But doesn't look as professional.
Question:	How do you clean them
Answer:	Yes. It does fit. I bought a Hyperx Quadcast microphone and it fits perfectly fine. I’ve had no problems fitting it onto the microphone.
Question:	will they fit an SM58 mic
Answer:	No, it doesn't. It's too small for blue yeti microphone.

Product features

Specifications:

• Size: 2.9 x2.3 inches (W * H)
• Caliber: 1.4 inches
• Color:Black, Red,Deep Red,Yellow, Purple, Midnight Blue,Aquamarine Blue,Rose Red,Grey,Orange.

Note: The Red and Deep Red is somehow looks close to each other. Please check the image if you will mind.

• 1.【DOUBLE SCREEN POP FILTER】:The gap between the two screen can block unwanted popping in recording, busting the pops of "S","P"s and "B"s.Effectively reduce the plosive, wind interference, saliva spraying.
• 2.【EASY TO SET UP】:The pop filter has a enhanced flexible 360° gooseneckclip stabilizing arm that can support its own weight and enough to hold the microphone stand and the inner rubber ring is perfectly matched to your equipment.(such as microphone desk stand, Tripod Boom Microphone Stands, Microphone Floor Stand).
• 3.【MICROPHONE MATE】:The microphone pop filter perfect for blue yeti,snowball mic and any other microphones.
• 4.【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shied is essential item for recording, speaking or singing; Commonly used in a recording studio.
• 5.【PACKAGE & GUARANTEE]】:1*EJT Pop Filter(microphone is NOT included). We provide 100% Satisfaction Guarantee. If you have any problem after receive this item, please don't hesitate to contact us, we will try our best to resolve all issues.

User questions & answers

Question:	Can the filter be sanitized
Answer:	Not sure about the Sennheiser MK4 Studio Plosive Issue.... But this is Nylon Mesh. It has suited my recording needs fully.
Question:	how wide can the clamp go
Answer:	Hello, Welcome to ChromLives Store. These don't fit on Blue Yeti mic, but we have the product fits on it. Here is the link: https://www.amazon.com/dp/B07F1P9H5S
Question:	Do I also need a foam mic cover if I'm using this filter
Answer:	It fits snuggly on my blue yeti. It is a very tight fit.
Question:	Is this. Nylon mesh or metal? Would it work for sennheiser mk4 studio plosive issues ? Thanks
Answer:	Replace them. There is no safe way to clean something like this to prevent the transmission of disease.

Product features

EJT 6 inch Microphone Wind Pop Filter

Protect your microphone from surplus spit caused by over eager performers. It can also protect the microphone from the accumulation of saliva.

Double Layer: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, then it passes the second screen, the blast is easily contained to produce great quality recordings.

Friendly Tip: The best effect between the sound source, the pop filter and the microphone is 4 inches.

Upgraded version EJT pop filter

Broadcasting Studio

Personal/Home Studio

Recording & Production

Radio Station

Product description

Wave Pop Filter features dual-layer steel mesh for optimum air current diffusion, eliminating pops and hisses caused by plosive speech sound. Simply align the magnetic attachment points, let Wave Pop Filter snap onto your Wave:1 or Wave:3 microphone, and say your p’s and b’s without distortion.

• Eliminates pops and hisses caused by plosive speech sounds
• Dual-layer steel mesh optimizes air current diffusion for maximum audio transparency
• Magnetic attachment points enable quick and easy installation
• Custom built for Wave:1 and Wave:3 microphones

• 【Two-screen Pop Filters】 The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained.Efficiently reduce the plosive, wind interference, saliva spraying during your recording or broadcasting, get a clear and loud sound.
• 【Adjustable Gooseneck】The pop filter has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and enough to hold the microphone stand and the inner rubber ring is perfectly matched to your microphone.
• 【MULTI-SCENE APPLICATION】:Studio microphone mic wind screen pop filter mask shied is essential item for recording, speaking or singing; can be used for singing, voiceover, podcasts, vlogging and anywhere else you need quality sound.
• 【Functions】 Banish the dreaded hissing and lisping sounds that come when pronouncing the letter ""S"" and blocks those ugly ""plosives"" that follows ""B"" and ""P"".Swivel mount for easy installation.
• 【PACKAGE & GUARANTEE】:1 X Pop Filter.If you have any problem after receive this item, please don't hesitate to contact us, we will try our best to resolve all issues.

User questions & answers

Question:	What is a good Microphone for recording vocals live to Garage Band
Answer:	No, this will not reduce the sound of your breathing. It eliminates the popping sound when you say words with the letter “P”, like “people” and “plenty”.
Question:	Is this suppose to come in an earamble package? Because I see a lot of pictures where is comes in a different package
Answer:	Spraying alcohol on it should sanitize it. I'm not sure what would happen if you attempted to wash it in the sink. It looks like it could trap water around the inside edges.
Question:	I game and use a blue yeti microphone and mechanical keyboard. Would this pop filter cut down the sound of the "clicking" sound from the keyboard
Answer:	I'm not sure the exact measurment but it does open to a pretty good range.
Question:	will this help to reduce the sound of my breathing in-between sentences, during recording of conversation
Answer:	A: Their basic functions are similar, so don't use them

Product features

Hold firm

Adjustable screw rotating clamp with scratch-proof gripper can secure to MOST tubular mounting booms or mic stands (Maximum diameter: 1.6inches)

Pure Sound

Microphone Pop Filter to immediately improve the sound of your vocal recordings!

360 Degree Gooseneck Holder

Flexible pipe made of carbon steel, perfect flexibility. The metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone .

Home Studio

Broadcasting Studio

Social Media Recording

• Cleaner Audio: This pop filter for microphones helps produce pristine sound quality by filtering pops, hisses and thuds. By providing a screen and gap, the pop screen helps disperse air pressure. Effectively reduces the plosives or wind interference.
• Double-Mesh: With a dual-layer mesh screen, the microphone pop filter won't stifle sound or diminish the quality of your voice. The pop shield for mics works to remove interference while elevating audio quality.
• Adjustable Gooseneck: Mounted on a flexible and fully rotational arm. The microphone filter can accommodate any studio space, height or angle. These audio accessories are compatible with Blue Yeti microphones.
• Easy Installation: Designed for stable and ultra-secure mounting. Adjustable clasp can fit on surfaces up to 1.75”. This microphone pop filter connects directly to edge of table or desk, microphone stand, and boom pole.
• Sound Necessity: If you’re a singer, vlogger, voiceover artist or podcast host, you want your voice to be heard. This mic filter helps block any hisses, pops or thuds to provide you with clean audio. Essential in to creating professional content.

User questions & answers

Question:	Is the pop filter alone enough or should this be combined with anything else such as a foam or cloth screen over the end of the microphone
Answer:	This device improves sound quality by helping prevent the impact of "plosives." These are low-frequency noises created when certain words such as "pop" or "box" are spoken. (Look up the definition of "plosive" on Wikipedia.) These create a brief pressure wave that impacts the microphone with enough force as to create a "boom" or "thump" sound. The actual impact heard depends on the microphone, the bass response of the system, the distance to the sound source, and the overall volume level. Some people speak with more plosive impact than others. Condenser microphones such as the Blue Yeti are particularly sensitive to plosives because of their low frequency response and the sensitivity of the diaphragm that generates the sound in the mic. The Yeti in particular has a tremendous low frequency response and must be used with some type of "pop" filter to avoid these "thumps" if the sound source is closer than a foot or so, depending on the volume of the source. A foam pop filter is often used on hand-held mics, but these can slightly degrade high-frequency response. For studio or desktop mics, a fine fabric or metal screen is used. Though these, particularly some metal ones, can modify the sound slightly, this is preferable to the harsh thumps created by plosives. Another benefit of pop filters is that they also prevent small droplets of "spit" from entering the microphone. When you're dealing with a mic that costs hundreds, if not thousands, of dollars, this is very important.
Question:	Can you mount this microphone on a boom stand or scissor boom stand
Answer:	Can’t go wrong with a shure sm58 or sm57.
Question:	How long is the gooseneck on this
Answer:	Please don't worry about that, we adjusted the packages for some batches of the products. The inner items are all the same if you buy from "Earamble Tech" store. If you have any problem please just contact us and we will help you solve it.
Question:	What is this for? Improving sound quality
Answer:	No. I love my obnoxious mechanical keyboard, but unless you're punching keys with enough force to create a pressure wave directly into the mic, this will not cut down on the sound of keys clicking.

Product features

DOUBLE LAYER MESH DISPERSES AIR PRESSURE FOR GREAT SOUND

Our double layer mesh mic shield for the Blue Yeti won’t stifle your sound, mask your voice, or drown out your inflection like those triple layer windscreen filters. It also won't cause issues like those “twangy” or “s phasiness” sounds like metal pop filters. Our pop filter helps eliminate the problem of popping sounds caused by air blasts to alleviate plosive impacts (or p-pops). The double mesh layer diffuses air to stop from distortion and popping.

YOU NEED A POP FILTER WITH STRONG 360 DEGREE HOLD | FASTER INSTALLATION

We’ve added an ultra-secure gooseneck mount to our pop filter to actually hold its position at any angle. It's equipped with an easy on clasp that attaches directly to your Yeti Microphone Stand in seconds. This microphone filter won’t fall, dip or collapse into your premium recording equipment.

CUSTOM DESIGNED MICROPHONE POP FILTERS FOR BLUE YETI

This Pop Filter has been custom created to prevent your Yeti from picking up Pops, B/P Plosives, Hissing, Thuds, Spit & Windbreaks.

So you get to record great sound and audio instantly with less post processing!

• WIDE APPLICATIONS - Our microphone pop filter suitable for 45 mm to 63 mm diameter microphones such as Aokeo Microphones, AT2020, AT2035, AT4040, AT2050, AT2020+, Samson Meteor , Scarlett CM25 ,CAD GXL2400, Apogee, Razer Siren X, BADAAX Mic, Rode NT1A, Rode NT-USB, MXL 770, MXL 910, MXL 2010, CAD U37, BM-800, Tonor, Neewer and many other microphones. NOTE: THIS WILL NOT FIT THE BLUE YETI
• THREE LAYERS FILTER MIC SHIELD - Three layers design include foam layer, metal net layer and basic etamine layer can effectively reduces the plosive, pops, crackles, wind interference, breath sounds when recording vocals. Absolutely necessary for recording, speaking or singing. This studio mic shield isolation helps to get your best vocal recording.
• MAINTAIN CLEAN - Metal mesh matches plastic frame in a special appearance design. Functionally prevents saliva, keeping cleanness for your microphones and protecting your microphone.
• EASY TO SET UP - Handy and quick to assemble and disassemble from the microphone and firmly fixed on your mic with the combination design of elastic bands and inner rubber ring, Special design perfectly matches with your microphones.
• QUALITY ASSURANCE- High quality rubber bands and synthetic metal mesh are used to make the filter more durable. If you encounter any problems in the use process, please contact us in time, we will provide you with satisfactory service.

User questions & answers

Question:	For it work with Snowball ice mic
Answer:	Probably not, at least not very well, due to the shape of that mic
Question:	Does this fit a Aokeo AK
Answer:	The pop filter is sufficient enough. The foam mostly protects from dirt/debris/condensation. So depending on the environment you will use the Yeti in will determine whether you need the foam over the microphone.
Question:	will this fit my Marantz MPM 1000u
Answer:	Hi there. If you have a flat-sided/square arm on your stand then this filter will clamp on to it. If the components are tubular rather than rectangular/square, then the other Auphonix pop filter would be a better fit. (http://www.amazon.com/Microphone-Auphonix-Environment-Accessories-Positioning/dp/B00CFXH4S6/)
Question:	Does this fit shure sm
Answer:	Hi there. The Gooseneck is 14" long. It makes it long enough to clamp to a Blue Yeti, and be easily positioned in front of the microphone, or clamped to your desk and easily positioned in front of any other type of USB microphone.

• 【Double Layer Pop Filter】- LILALIWA pop filter for microphones features double layers of nylon mesh, which can efficiently reduce plosives, wind interference and saliva spraying during recording or broadcasting, and help users get a clear and loud sound.
• 【Clearer Sound】- Banish the dreaded hissing and lisping sounds that come along with pronouncing the letter "S" and blocks those ugly "plosives" that follow the sounds of "B" and "P".
• 【Adjustable Gooseneck】- The pop mesh shield has a flexible 360° gooseneck clip stabilizing arm that can support its own weight and is strong enough to hold the microphone stand.
• 【Easy to Assemble】- The adjustable screw rotating clamp with scratch-proof gripper can secure a variety of tubular mounting booms or microphone stands, thus preventing your devices from damage.
• 【Protect Your Loved Mic】- LILALIWA professional double-layer pop filter is designed for singers, streamers and actors alike who would like to achieve the best performance. It also helps protect your personal microphone from spit.

User questions & answers

Question:	What is this for? Improving sound quality
Answer:	Absolutely. No issues.
Question:	How heavy is it
Answer:	No, this will not fit
Question:	Do I also need a foam mic cover if I'm using this filter
Answer:	Yes, it does it is held by hard rubber straps
Question:	Is the goose neck strong enough to hold up the filter
Answer:	Yes.

Product features

Double Layer Pop Filte

LILALIWA microphone pop filter is featured with double layer nylon mesh.The mesh ring is made of excellent ABS material, which is tough and not easy to deform.

Flexible Gooseneck

The 360° gooseneck is made of carbon steel, which is flexible and resistant to bending and can support its own weight and keep it in place. You can adjust the pop filter to any angle and distance you need.

Stable Clamp

Specially designed clamp can be fixed tightly to all kinds of microphone arms. Your furniture or devices will never be been damaged because of using the rubber mat. Of course, it can use with any microphone

Live Broadcast

Radio Station

Recording studio

Product description

Own a Blue Yeti or any other mic? Do you need a good pop filter?



The majority of pop filters you can buy are made for a microphone stand or boom.



But what if you want a pop filter that you can directly attach to your Blue Yeti, or easily use with any other desktop microphone?



Stop your search now and get the InnoGear Pop Filter!



The pop filter is specially designed to fit directly on the Blue Yeti, or clamp on to any standard desktop or flat surface microphone arm, the InnoGear Pop Filter just does the job simple and easy.



If you have the Blue Yeti or mic, simply take the pop shield out of the packet, and clamp it directly to your Yeti.



The filter will also easily connect to any flat surface microphone arm or boom. And it is suitable for broadcast studios, professional recording studios, podcast live broadcasts, etc.



Your new double screen pop filter will



- connect simply and easily to your Yeti, your rectangular mic arm, or your desk

- reduce the damage caused by saliva on the microphone.



PLEASE NOTE: THIS PRODUCT IS COMPATIBLE WITH BLUE YETI MICROPHONES.

• Two-screen Pop Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained.
• Adjustable Gooseneck: The metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone.
• Universal Compability: Adjustable screw rotating clamp with scratch-proof gripper can secure to majority of tubular mounting booms or mic stands (Maximum diameter: 1.6inches).
• Application: Banish the dreadful hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P". It is a great item for singers and actors alike who want help achieving excellent performance and help protect the spitting all over your vocal mic.Its dual layer and tighter mesh allow it to actually stop plosives. Put your hand behind it and make the P-sound and you won't feel any air come through.
• Easy Mount & Demount: Hassle-free swivel mount for easy installation. This easy-to-use pop filter allows you to mount or demount it in seconds.

User questions & answers

Question:	How heavy is it
Answer:	No its not, I personally have a neewer scissor mic stand and it works perfectly well with it.
Question:	Will this fit blue yeti pro
Answer:	When you talk, tiny particles of saliva can come out. If these get into a microphone, it can make a "pop" sound. It helps stop that from happening, and seems to do a fairly good job if it's positioned right.
Question:	how do I get it in a case or a box
Answer:	Very light. I tighten it to my Yeti mic and it barely moves.
Question:	Is it too heavy for a desktop scissor mic stand
Answer:	Their basic functions are similar, so don't use them.

Product features

InnoGear Microphone Wind Pop Filter

InnoGear microphone pop filter is a device used to protect mic capsules from plosive energy. A pop filter helps to eliminate the popping sound associated with gusts of air from the human voice and other sources.

Due to its unique design, you can easily adjust the angle and distance between the screen and the microphone to meet your needs, and it is the essential item for professional or beginner to use at home or studio sound recording.

DOUBLE LAYERED SCREEN

The especially double layered screen pop filters excess noise to the lowest. Picks your original voice only and improve the sound of your vocal recording!

ADJUSTABLE GOOSENECK HOLDER

The microphone pop filter gooseneck is made of metal material which can fully support its weight and keep it in place. It is flexible for you to adjust the angle and distance between the screen and microphone to show your perfect voice.

STABILITY & PROTECTION

With the adjustable screw rotating clamp to fix securely to any microphone stand (Maximum diameter: 1.6 in/4 cm).The simple clamp style allows your microphone pop filter to be easily portable.

Social Media Recording

Broadcasting Studio

Personal Studio

• CLEARER SOUND: The Arisen mic pop filter is made of a double layer of metal material, which protects the microphone filter from corrosion by saliva and other steam. Besides, the inseparably close double-layer of the metal pop filter can more effectively eliminate "p" "b" and the hissing of the letter "S" to achieve the perfect sound quality optimization effect.
• 360° ADJUSTABLE GOOSENECK of pop screen：The gooseneck tube of the Pop Filter is sufficient to support the weight of the metal blue yeti pop filter and hold it securely in place. And you can allow adjusting the angle and distance between the pop filter for microphones and the microphone by changing the angle of the gooseneck tube, which filtering noise or burst sound at the angle that works best for you.
• DOUBLE METAL MESH of POP FILTERS: Sometimes, you will find the filtering effect is not apparent by using a single layer pop filter metal to filtering out the noise. But here, Arisen mic windscreen does something that other brands on the market are having a hard time doing, that's the Arisen upgraded versions pop filter that filter out noise while maintaining natural sound quality, resulting in high-quality sound.
• Widely compatible: The Adjustable swivel clamp with an anti-scratch feature that allows the mic screen to be securely attached to a table or device when installing the pop filter for a condenser microphone, or it is easily installed in any microphone stand or Blue Yeti microphone. Also, the ergonomic design of the adjustable clamps for audio technica pop filter makes it easy to install in music studios, offices, individual studios, and recording studios.
• FRIENDLY CUSTOMER SERVICE: The ARISEN microphone filter shield can be easily installed to different microphone stands without breaking the stands. And more and more video bloggers chose it to optimize the sound quality because that gets more fans likes from their followers by using this black pop filter. Also, the ARISEN WINDBOX pop filter mesh provides 12 months warranty, any concerns. Please be free to contact us.

Product features

A Bespoke Experience

With the incredible versatility of the ARISEN INFLUENCER SERIES, you can work any way you want. Our core engineering ethos dictates that form should follow function, but with the INFLUENCER Series, we wanted to create something which not only performs superbly, but possesses a visual and tactile quality which together create a durable, distinctive ‘heritage’ product.

Q: Get Clear Sound quality while using it?

During the use of the product, the inseparably close double-layer of the metal pop filter can more effectively eliminate "p" "b" and the hissing of the letter "S" to achieve the perfect sound quality optimization effect, And you can allow adjusting the angle and distance between the pop filter for microphones and the microphone by changing the angle of the gooseneck tube

Focus on pure essentials

• Ultrasonic suture metal mesh
• 360 adjustment
• Efficient clamping tough
• Professional and Classy Design
• Shock proof

Every single details we made uniquely is to ensure to present

the best quality of Microphone products in the market.

They will go anywhere – and with anything.

Rediscover your voice

Nowadays, streaming is becoming a job for the living of most people. More and more vloggers, YouTubers, and studio have decided to choose Arisen influencer series products which are designed based on Ergonomics that make these self-media streamers better express themselves and gain fans.

Product Specifications:

At a Glance:

• Exclusive patent appearance design
• Use double metal mesh
• Support 360 degrees rotating freely

Product Specifications:

• Color: Black
• item Size: 54.5*15.5*1.6(cm) / 21.45*6.10*0.63(inch)
• Pacakge Size: *33.3*16*2.8(cm) / 13.11*6.3*1.10(inch)
• item Weight: 267 (g) / 9.4(oz)
• Pacakge Weight: 344(g) / 12.3(oz)

ARISEN'S Advantage:

• 30-Day No-Reason-Ask Refund or Replacement.
• 365-Day Replacement for all product defective, (including product ·stolen by your jealous friends).·FREE Lifetime *ARISEN CARE* (Chatting with us for anything).

Meet the Team: Better performance is just the beginning. We're passionate engineers, developers, researchers, retailers, marketers … and dreamers. One goal unites us—to create products and experiences our customers simply can't get anywhere else. If you have more advice, we invite you to explore.

Join us with 100K+ Global Happy Users: We have a simple mission: think of better solutions, create better products, help people enjoy the things they love.

• ♪ Package Included: This kit almost covers every equipment for professional microphone recording except the microphone. The package thereby contains 1 microphone isolation shield, 1 adjustable wind screen bracket stand, 1 pop filter, ideal for vocal acoustic recording and podcasting.
• ♪ Interference Elimination: The inner side of this microphone isolation shield is made of insulation material that absorbs cotton, which can reduce echo and sound reflection in the course of recording. The outside of the reflection filter is composed of premium steel, which is proved to be strong, tough and recycled.
• ♪ More Stable, Sturdy & Durable: This upgraded tripod mic stand is made from heavy duty steel, which is tough enough to be firmly fixed on the ground and support to install microphone, acoustic isolation shield and pop filter on it.
• ♪ Double-Layer Pop Filter: The pop filter comes with a double-layer design. The first filter screen is used to block air blast like any other pop filters do and the gap between two filters then disperses the remaining air pressure. By the time it passes through the second filter screen, the saliva spray is restrained and thus, producing high-quality recordings.
• ♪ Versatile Use: This type of microphone isolation shield comes with accessories like wind screen bracket stand and pop filter together, so that it has a wide range of application and it can be widely used in studio, recording, podcasting, broadcasting, livestreaming, Youtube, gaming record and more.