10 best pedal with power supplies

• 10 Isolated Output,Isolated Short Circuit/Overcurrent Protected
• Material: Aluminium Alloy, light weight and portable
• Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate
• Includes link Moukey power cables (10pcs)
• Power: AC 100v-240V Input: DC 18V，Powers For 9V、12V or 18V PEDAL

User questions & answers

Question:	Can use with moogerfooger
Answer:	Guitar, or bass?
Question:	Can someone enlighten me what is the 9v 500ma is for? can i use it on regular 9v boss pedal like boss cs
Answer:	Most likely NOT. These are smaller tuners for a guitar. Bass tuners are almost twice the size, because of higher string gauge, more wrapping the string around the peg, etc... Make sure that the tuners you buy are for a BASS guitar, and most replacement tuners adapt to most basses
Question:	Before I purchase,...some of my pedals are reverse polarity. "center pin negative" and others are "center pin positive" Will this power supply work
Answer:	yes, it will fit very good- Works awesome-
Question:	Is this actually isolated? Ive seen others in this price range that appear to be isolated but the reviews have said they arent
Answer:	No. These are not good tuners. Pop the back off your current tuners and tighten the screw up a little. The tuners on my sp2 sucked bad, but the exact same tuners in my sg special are great.

Product features

Short-Circuit Protection

All 10 outputs in this unit have separate short-circuit protection, i.e. short circuit in one channel won't affect other channels' function. Under the circumstances of all LED lights on, LED light of the short-circuited channel will off, while lights in the other normal channels are still on. This helps locating the faults when there were short circuits among many effectors.

Switch For LED Lights

Turn the switch towards those LED lights, normally all lights would go on after the power is connected. If you don't want all LED lights, please turn the switch back.

Independent and stable power supply

The power supplies of the Donner series of effects have absolutely independent power interfaces. It has an 18V power supply, and all outputs are independent of each other through its voltage regulator circuit. The aluminum alloy material is strong and compact and easy to carry.

Donner Pedal Power Supply DP-1

Power: AC 100v-240V.

Input: DC 18V.

Output:

7 way 9V 100mA

1 way 9V 500mA

1 way 12V 100mA

1 way 18V 100mA

Product description

Don’t let a dead battery in your pedalboard ruin your next performance. Rely on the consistent, battery-free direct power of a D’Addario Accessories (formerly Planet Waves) AC-DC 9-Volt Power Adapter. The tip-negative, sleeve-positive power supply can deliver 500mA to fuel even your most power-hungry devices. The 9V adapter will minimize or eliminate the need to change batteries and give you confidence that your pedalboard is ready to go every time. The 72” cord length adapter converts AC wall power to 9-Volt DC for powering most instrument pedals, including the Planet Waves Chromatic Pedal Tuner, and other 9-volt battery electronic devices. The D'Addario adapter can also be used to power tip-negative keyboards. Its input is 100-240VAC, output is 9VDC, 500mA; barrel size 2.1mm; and available in NEMA, F plug and G plug types. For over 20 years, D’Addario has been leading the industry in innovative and problem-solving products that serve musicians worldwide. D’Addario Accessories are proudly made in a state-of-the-art manufacturing facility to the most stringent quality controls in the industry. The D’Addario family’s heart, soul and love for making music is put into every accessory we create, and we never stop inspiring performance.

• BATTERY-FREE PERFORMANCE – You won’t need to worry about dead batteries in your pedalboard ruining your performance when you use an AC-DC 9-Volt Power Adapter. You can ensure a consistent, battery-free performance when you directly power it.
• VERSATILE - The adapter converts AC wall power to 9-Volt DC for powering most instrument pedals and other 9-volt battery devices. The D'Addario adapter can also be used to power tip-negative keyboards.
• 500mA MAX CURRENT - The tip-negative, sleeve-positive power supply can deliver 500mA to fuel even your most power-hungry devices.
• PRODUCT INFO - Input: 100-240VAC; Output: 9VDC, 500mA; Barrel size: 2.1mm; Polarity: Tip “-“; Cord Length: 72”; Available in NEMA, F plug and G plug types.
• D’ADDARIO ACCESSORIES - For over 20 years, D’Addario Accessories (formerly Planet Waves) has been leading the industry in innovative and problem-solving products that serve musicians worldwide. D’Addario Accessories are proudly made in a state-of-the-art manufacturing facility to the most stringent quality controls in the industry.

User questions & answers

Question:	Does this power supply work for my dymo label manager 160? it calls for 9v 2a
Answer:	The display is very thin, I would say less than 5mm outside of the base where the I/O on the back is. As a result it doesn't offer VESA mounting capabilities.
Question:	If I have a splitter, how many pedals max should be plugged into one power supply
Answer:	I was only able to get 66hz refresh rate out of it.
Question:	I've purchased 3 of the 9volt Planet Wave Adapters for my Fender Mini Twin Reverb Amps. When I plug them in, I only get a humming noise. Troy,txs
Answer:	This monitor uses half the power of its predecessor, HDR400 certified and has a 10-bit color depth (1.07 billion color palette) as opposed to an 8-bit color depth (16.7 million colors)
Question:	The spec says a Max Current of 300mA. I want to use it for BOSS MT-2 pedal which requires 200mA@9V DC. Can this be used
Answer:	Yeah

Product features

AC-DC 9-VOLT ADAPTOR

Ensure consistent, battery-free performance with the D’Addario AC-DC 9-Volt Adaptor. The adaptor converts AC wall power to 9-volt DC for powering most instrument pedals and other 9-volt battery devices. The tip negative, sleeve positive power supply can handle 500mA to power even your most power hungry devices.

Features:

• 9V DC power supply
• Tip negative, sleeve positive
• DC 500mA max
• Note: The 9 volt adapter can also be used for other manufacturers' electronics

Battery Free Performance

You won’t need to worry about dead batteries in your pedalboard ruining your performance when you use an AC-DC 9-Volt Power Adaptor. You can ensure a consistent, battery-free performance when you directly power it.

Versatile

The adaptor converts AC wall power to 9-Volt DC for powering most instrument pedals and other 9-volt battery devices. The D'Addario adapter can also be used to power tip-negative keyboards.

500mA Current

The tip-negative, sleeve-positive power supply can deliver 500mA to fuel even your most power-hungry devices.

• OUTPUT: 9V DC, 1A (1000mA), Tip Negative (-) design
• INPUT: AC100V-240V, 60Hz, 6.5W
• 5 way cable chain could power on 5 pedals at the same time
• Professional noise isolation performance
• Fit for most brands of guitar effect pedals

User questions & answers

Question:	Did anyone have trouble with this particular adapter? I plugged it in with my pedal (not all donner) and I get a buzz in the mains at church
Answer:	The plug input on your drum machine will tell you the voltage needed, that will tell you which adapter to get.
Question:	The donner tiny looper guitar effect pedal requires a 9v dc power supply that is "negative in the center". will this power supply work with that
Answer:	I didn't notice that until you mentioned it. I bought it to replace a lost cord to a device labeled 9V AC. It works great for it. Unless both are somehow serendipitously mislabeled. I put my multitester on it. It reads 11.7V AC
Question:	Will this supply power a tc electronic flashback x4? (300ma draw
Answer:	Plug is labeled DC output but it outputs ac voltage. Made in China so...
Question:	Does the daisy chain plugs come with plastic sleeving or tube to cover the un-used plugs (so the positive outer rings can't short to metal casings
Answer:	It isn't mislabelled. Where MOST devices require 9 volts DC, SOME devices require 9 volts AC and this unit provides it.

Product features

Donner DPA-1 Pedal Power Adapter

Product description

Donner DP-Z 9V Guitar Pedal Power Supply has 10 outputs ,which includes 4 x 9V 100mA, 3 x 9V 300mA, 1 x 9V 500mA, 1 x 9V/12V 500mA, 1 x 18V 300mA with 1 x DC 18V input, 1 x USB charge port. 10 Isolated Output  ,5v 1000 mA USB charge port Meet the power demand of Mobile devices

• 【Super Power Adapter】Donner DP-Z 9V Guitar Pedal Power Supply equips with superpower adapter: DC 18v 2000mA ，this powerful input ensures that every output is in the best possible state.
• 【10 Isolated Outputs + 1 USB charge port 】 Donner DP-Z 9V Guitar Pedal Power Supply has 10 outputs ,which includes 4 x 9V 100mA, 3 x 9V 300mA, 1 x 9V 500mA, 1 x 9V/12V 500mA, 1 x 18V 300mA with 1 x DC 18V input, 1 x USB charge port. 10 Isolated Output  ,5v 1000 mA USB charge port Meet the power demand of Mobile devices .
• 【Noise Reduction Circuit Design】Donne Guitar Pedal Power Supply Quality is made of aluminum alloy material, which makes it light, and portable. It has a noise reduction function, low noise gives you a better experience, and direct current increases the stability of the power supply during use.
• 【Short Circuit Protection】 Independent short-circuit protection, when one output is short-circuited, other outputs can still work normally without being affected. Bright Blue LED bar For Pedal Board Lighting & Short Circuit Indicate.
• 【Special LED strip design】1 X Long blue LED light bar 1x orange LED light bar 1x red LED light bar.

Product description

Features of OTraki Pedal Power Supply

☛ Individual outputs will keep other outputs continue to function if any short circuits arise.

☛ With 7 x 9v outputs (100mA), 1 x 9v output (500mA), 1 x 12v output (100mA) and 1 x 18v output (100mA), it can power different pedals.

☛ 10 Blue LED for pedal board lighting and short circuit indicating.

☛ The 10 x 50cm DC power cable should be long enough even for the largest pedal boards.



Product Details:

Product name: Pedal Power Supply

Brand: OTraki

Body size: 15.4 × 4.3 × 3.4 cm

Weight: 450 g

Input: DC 18 V, 1000 mA



Output:

DC output 1 - 7 jack: 9 V, 100 mA

DC output 8 jack: 9 V, 500 mA

DC output 9 jack: 12V, 100 mA

DC output 10 jack: 18V, 100mA



Package Included:

1x Pedal Power Supply

1x Power Adapter

10 x 50 cm DC Power Cable

2 x Polarity Reversal Cable

1x User Manual



NOTICE:

Please make sure correct positive and negative polar before wiring(Incorrect polarity may damage this unit).

• ✅ 10 INDIVIDUAL OUTPUT: OTraki power supply is designed for effect pedals. With 10 isolated output: 9V 100mA port x 7, 9V 500mA port x 1, 12V 100mA port x 1, 18V 100mA port x 1. Short circuit in one channel won't affect other channels' function.
• ✅ LED POWER INDICATOR: Turn on LED indicator lights switch, all lights will normally go on after power connected and LED light goes out in the case of a short circuit, which helps locating faults among many effect pedals when there were short circuits. ✅ ATTENTION: The black switch in the top left corner is just led light switch, not power off switch for pedals. If you want to turn off the whole power supply, you need to unplug the power adapter.
• ✅ UPGRADED - LOWER NOISE: Built in a powerful noise filter and equipped with an upgraded power adapter, this pedal power brick is greatly improve noise problem. It is quiet for you to enjoy playing with clear and firm sound.
• ✅ SHORT-CIRCUIT / OVER-CURRENT PROTECTION: 10 independent output, and each channel has separate short-circuit and over-current protection. The pedal board power supply will protect the main body and the effect when one port is short-circuited due to misuse or accident.
• ✅ EXCELLENT HEAT DISSIPATION: The pedal power supply adopt superior heat radiation aluminum alloy material to keep stability. Selected IC chips with less heat generation, enough space inside the equipment for fast cooling down.

User questions & answers

Question:	Is this delivered from the US ? thanks
Answer:	Hello, Thank you for your answer. The guitar power adapter must be plugged into the power strip to work, and the effects cannot be charged when the power is off. Any question please feel free to contact us.
Question:	Mine is getting more hum that when my pedals were daisy chained. Is it defective
Answer:	Hello, thank you for your interest in this pedal power supply. As the pedalboard power supply is built-in powerful noise filter, this pedal power brick can greatly improve the noise problem. Any question please contact us any time.
Question:	Is it compatable with the boss me
Answer:	Hello, thank you for your question. You can be fixed on the pedal bracket with the Velcro but need to buy the velcro separately. Or the guitar pedal power supply can be used directly without fixing.
Question:	The description says "isolated" is it actually isolated
Answer:	Hello, thank you for your interest in our product. Yes, multiple ports can output at the same time without interfering with each other. As long as your pedal power is 9v 100mA, the 9v port can output stably. Hope that can help you.

Product features

OTraki Guitar Pedal Power Supply

Powers for 9V, 12V or 18V Pedal

There is one 18 volt power source, all outputs are individual from each other by their voltage regulator circuits.Aluminum alloy material, solid and compact, easy to carry.

ATTENTION: The black switch in the top left corner is just led light switch, not power off switch for pedals. If you want to turn off the whole power supply, you need to unplug the power adapter.

Input: DC 18 V, 1000 mA Output

10 Blue LED for pedal board lighting and short circuit indicating

Just turn on LED indicator lights switch, all lights will normally go on after the power is connected and LED goes out in the case of a short circuit, which helps locating faults among many effect pedals when there were short circuits.

NOTICE:

Please make sure correct positive and negative polar before wiring. Incorrect polarity may damage this unit!!!

Circuit and Over-current Protection

All channels have separate short-circuit and over-current protection, protecting the effect when one port is short-circuited due to misuse or accident, short circuit in one port will not affect other ports' normal work.

18V 1A Output Power Adapter

Pack with an 18V output power adapter (AC 100V-240V input) .

The length of the power cord is about 46in / 3.8ft.

Compact and Upgrade Design

Mini size 15.4 x 4.1 x 3.4 cm, compact and handheld, won't take up a lot of space.

Upgrade it in basis of market requirement, add two ears on both sides for mounting.

Product description

Short-circuit protection

All 7 outputs in this unit have separate short-circuit protection, i.e. Short circuit in one channel won't affect other channels' function. Under the circumstances of all LED lights on, LED light of the short-circuited channel will off, while lights in the other normal channels are still on. This helps locating the faults when there were short circuits among many effectors.



Specifications:

Material: Fireproof Plastics ( ABS+PC )

AC Rated Input: 110-240V , 50/60Hz

AC Outelet Rated Output: AC 100-240V , 50/60Hz, 600W

Power Up State: US 2-Prong Plug

AC Power Cord: 5Ft Detachable Cable

item weight: 500g.

Item Size: 5*2.7*0.9 in

DC Output :

- 6 way 9v 100ma.

- 1 way 9v 300ma.



Connection:

Included cables use industry standard 5.5mm x 2.1mm positive barrel, negative center polarity plugs.



Attention:

Incorrect polarity would damage thisunit, please make sure correct positive and negative polar before wiring.



What you Get:

1 x Hiree Power Supply

1 x 1.5m AC Power Cord

7 x 5.5mm x 2.1mm DC Power Cable

24-Month Hiree warranty & 90-DAY money back guarantee.

• 【7 WAY ISOLATED OUTPUT】Hiree power supply is designed for effect pedal. 7 Individual output: 9 Volt 100mA port x 6, 9V 300mA port x 1. Short circuit in one channel won't affect other channels function.
• 【2 Safe Outlet Power Socket】2 x 2 prong outlet, You can charge your Pedal, Speaker,Keyboard Musical Instruments and other devices with this outlets power strip.AC Outlet Total Output 600W.
• 【SHORT-CIRCUIT / OVER-CURRENT PROTECTION:】All 7 outputs in this unit have separate short-circuit protection, i.e. short circuit in one channel won't affect other channels' function.
• 【NOISE FILTERING】This guitar pedal power brick is built in a powerful noise filter. It is so quiet that you can enjoy playing with clear and firm sound.
• 【Compact Size and No External adapter】Compact body and 5ft disconnectable AC power cord, very easy to manage and carry everywhere you go. for maximum space-saving at home or in your travel bag.Wide range input voltage from 100v to 240v is ideal for international travel.

User questions & answers

Question:	Do you include an adapter type c for the ac power cord
Answer:	There is an interlock on the shredder that prevents it from operating unless it's sitting on the shredded paper receptacle - usually a switch in a slot on the head that is closed by a tab on the receptacle. If the bag doesn't interfere with that interlock, it should work. A very thin bag, or a bag cut out specifically to not interfere with the interlock, will likely work.
Question:	Este producto ya trae los cables para conectar los pedales
Answer:	It would be great for a small office. Just be careful not to put thicker sheets or folded sheets in too often or it will overheat the system and you have to wait 15 - 20 minutes for it to cool down. Stick to one or 2 sheets at a time. If you have a lot of paperwork, you may want to go up a size because the basket fills up pretty quickly. Overall, it is a good little machine.
Question:	Do you include a type c plug to be used in other countries
Answer:	Great question... I checked the Instruction Manual to find that there is no mention of a warranty... It's a lazy Sunday afternoon (August 17th, 4:34 PM PDT) so I called Amazon Customer Service (1-800-216-1072)... The very nice lady who answered (Marya) tells me that while the warranty information does not appear anywhere on the Amazon website, there is a one-year warranty on ANY AmazonBasic product, including the 6-sheet cross-cut paper shredder (ASIN# B00HFJWKWK)... Good to know... We've had this unit a couple of months and love it... Only challenge is that we generate a whole heckuva lot more shreds than we imagined... Would be great if we could order a basket about three or four times as large...
Question:	Are the output cords included
Answer:	The easiest oil to use are the shredder oil sheets. No mess, no fuss. https://www.amazon.com/AmazonBasics-SP12A-Shredder-Sharpening-Lubricant/dp/B01H7M7BXM/

Product description

Pedal Power 2 Plus features include two outputs that will power Line 6 modeling pedals and two outputs that can have a variable voltage sag to emulate dying carbon batteries. Like the original Pedal Power, each of its eight outputs are completely isolated, short circuit protected, regulated and highly filtered. The Pedal Power 2 Plus comes complete with cables, detachable AC power cord, is handmade in the USA and carries a 5-year warranty.

• A universal power supply for all battery-operated guitar pedal effects
• The only universal power supply available which will power any type of Boss pedal effect
• Features 8 completely isolated outputs
• Comes complete with cables and a detachable AC power cord
• Handmade in the USA and backed by a 5 year warranty
• This device is designed to operate only at 120 volts. A step up/down transformer is required for use in countries not using 120 volts.

User questions & answers

Question:	Will it work on my Line 6 - DL
Answer:	The unit comes with all needed wires - Including wall plug =|----> 18v input to power all outputs.
Question:	Can this power pedals that need 500ma, 1300ma, or 2000ma? That's what my pedals need. If not this is useless to me
Answer:	Depends on if your pedals are power hungry. Since they outputs aren't isolsted, you will get noise. My Strymon pedals were too noisy such that I could not run them with this supply.
Question:	When iconect my effects to a daisy chain i get so much noise and even radio stations with overdrive, does this item fix that
Answer:	A wall wart power supply and power cables to attach to pedals were included.
Question:	Why wouldn't you just buy a powerstrip and plug each of your pedals into it? Or a Visual Sound one plug that connects all the chained effects
Answer:	Hello, thank you for writing to us. The eight 9 volt outputs on the M237 can handle 150 mA each, and 1200 in total. The two 18 volt outputs tke 400 mA each and 800 mA in total. Here's a link to the instruction manual in case you'd like to see it : https://vidweb.aws.marketlive.com/jimdunlop_vid/text/content/pdp/manuals/M237.pdf If you have any other questions for us, let us know! Thanks again and have a great day.

Product features

Voodoo Lab Pedal Power 2 PLUS

The Voodoo Lab Pedal Power 2 PLUS is the finest power supply available for guitar effects. It’s eight 9V outputs will power any type of battery operated effect. Each output is completely isolated, short-circuit protected, highly filtered and regulated. This insures reliable operation, free of hum and noise.

Pedal Power 2 Plus includes two high current outputs, capable of properly powering newer high power effects such as Boss Twin, Line 6 modelers, and TC Electronic Nova pedals. It also features two variable voltage outputs to simulate worn batteries. Using an optional voltage doubler cable, you can power many 18V and 24V effects as well.

Powering Pedals is Easy. Making them Sound Great isn't.

3) Power indicator. This LED indicates the Pedal Power system unit is operating.

4) DC output jacks . Each output provides 9 volts of isolated, filtered and regulated DC power for your pedal effects.

5) SAG controls. Next to output jacks 7 and 8 are controls to vary the voltage from 4V to 9V.

6) Voltage selector DIP switches. These switches select the output voltage. Switches 1-8 correspond to DC outputs 1-8. Normal 9V operation is with the switch in the Normal (Off) position.

About Voodoo Lab

Voodoo Lab has designed and manufactured professional electronics for recording and touring musicians since 1986. Rugged, reliable and handmade from the finest components, every product is hand built one at a time in our Northern California facility. Created and built by musicians for musicians, all Voodoo Lab products deliver pure, richly detailed tones that can be heard on the biggest stages worldwide.

Whether you’re a stompbox junkie, or putting together the ultimate programmable rig that incorporates rack gear and vintage pedals, Voodoo Lab can help you achieve the sounds you’re looking for.

Product description

Pedal Power X4 is a professional isolated power supply for up to four battery operated or high current DSP effects. Housed in an ultra-compact aluminum chassis, the virtually weightless X4 easily mounts to even the smallest pedalboards. Pedal Power X4 delivers the pure and reliable power necessary for pedals to perform and sound their very best - all with zero added noise. Compact, lightweight, and energy efficient digital switching power supplies have become the norm for powering your laptop or charging your phone. Problem is, the same switching process that makes them compact and efficient also generates noise. Noise that no amount of filtering alone can fully mask. While acknowledging its many benefits, eliminating digital switching noise would be a pivotal benchmark to establish. Achieving this would require a complete revolution in design. As the pioneer and industry leader of low noise, isolated guitar effect power supplies, we began a 5-year research and engineering project. The result is a novel approach to power supply design, addressing the unique requirements of the guitar rig with noise effectively non-existent and zero audible artifacts under any circumstances.

• Four isolated 9V outputs
• Ultra-compact chassis easily mounts to the smallest pedalboards
• Unique DC transformer topology provides optimum platform for QUIET switch-mode power
• Includes power cables, Universal input power adapter with detachable AC line cord, and 3M dual lock for mounting
• Made in the U.S.A

User questions & answers

Question:	Will the x4 power a Strymon Timeline
Answer:	My daughter is 11 and she has short legs and she rides 3 miles a day how tall are you
Question:	What is the total length of the power cord that goes from the x4 to ac adapter to the wall? Thank you
Answer:	If you mean pedaling backward, I just tried it. The tension is the same, the timer and speed indicators work. Looks to me like it would do the job.
Question:	Can the wall wart handle 220v
Answer:	I have no idea what your problem is but I have smooth peddling. Perhaps you have said it too high for your strength in there for your struggling to get a smooth motion. So, try setting it to a lower strength
Question:	Will the x4 power a Strymon Timeline
Answer:	Yes you can reach the pedals. I have this model and my kids can use it just fine. They are short just like me.

Product description

Guitar Pedal Power Supply Feature:

This effect power supply is a safe and secure pedal board power supply

10 Isolated outputs, isolated short circuit overcurrent protected.Each output features a blue LED.

When lit, this LED indicates a good connection. If short-circuited or overloaded,this LED will turn off.

Noise free support, anti-interface , isolated output channels, Great heat dissipation

Guitar Pedal Power Supply Adaptor is an 10 outputs isolated pedal power supply available for pedals,keyboards,amps

And other instruments with the same voltage and current demand from outputs

Aluminum alloy shell, lightweight and durable. Let yourself enjoy music anytime, anywhere

Guitar Bass Effects Pedals with Built-in USB Charging Port for Phone iPhone Pad iPad



Power Supply Specifications:

Material: Aluminum alloy

Power: AC 110V-240V

Power for: 9V, 12V or 18V Guitar effect pedal

Input: DC 18V

Output:

4 way 9V 100mA

3 way 9V 300mA

1 way 9V 500mA

1 way 12V 300mA

1 way 18V 100mA

Product size: 16x5x3cm / 6x2x1.2in

Package size: 16.6x15.5x 6cm / 6.5x6.1x2.4in

Package weight: 600g



Guitar Pedal Power Supply Package Included:

1 x CP-04 Power supply

1 x Adapter

10 x Cables

2 x Connecting cable

1 x English user manual



Note:

Incorrect polarity would damage this unit, please make sure correct positive and negative polar before wiring.

If the output electric current and voltage of power supply exceeded the pedal.The pedals may produce noisy sounds.

So please make sure that your current and voltage of pedals are the same as the output ports of power supply.



WARRENTY

: LIFE TIME WARRENTY unconditionally refund or resend.

We promise 100% friendly customer service and satisfaction

• 10 isolated outputs: 4 * 9V 100mA,3 * 9V 300mA,1 * 9V 500mA,1 * 12V 300mA,1 * 18V 100mA
• Switch for LED lights:Bright blue LED for pedal board power supply lighting&short circuit indicating,if you turn it on,all lights would go on after the power is connected
• Short-circuit protection for stable and safe power supply,and short circuit in one channel won't affect other channels' function
• This pedalboard power supply is made of high quality aluminum alloy,inbuilt USB charging for iphone ipad,mobile phone etc.
• Package including a CP-04 pedal power supply,a power adapter,10 cables,2 connecting cable and English user manual. 1 Year unconditionally refund or resend.We promise 100% friendly customer service and satisfaction.

User questions & answers

Question:	All 10 of my pedals are 9 volt. Is there a way to get the 12 and 18 volt outputs to operate at 9 volts
Answer:	It’s the same manner as if you were clipping shoes in!
Question:	Can this be mounted underneath a pedalboard
Answer:	No...running shoes work fine.
Question:	I'm looking to power a 12v 300ma pedal with center positive. Does this have polarity reverse adapters
Answer:	Nope no cleats needed! The bottom part of the cage acts as your cleat and it clips in the same way! Then you can wear regular shoes with it!
Question:	How would I (or Should I) use a daisy chain cable to power multiple pedals from one port
Answer:	No adjustment needed once sized

• With a built-in 7.4V/4400mAh rechargeable lithium battery pack, charging time is about 2.5hrs.
• Lasts 2 hours with high current digital effect pedals; lasts more than 10 hours with 8 analog pedals.
• One 5V/1A output USB port, compatible for charging cell phones, tablets and some other portable devices.
• Bright LED for effect pedal board lighting & battery level indicator, automatically stop charging be fully charged.
• 8 DC Output Jacks: 4 jacks 9V 100mA; 3 jacks of 9V 500mA; 1 of 9V/12V/18V adjustable output jack,maximum current is 100mA.

Product features

Switchable 9V,12V or 18V

DC Output 8 can be switched from 9V,12V or 18V at 100mA.

5V/1A Output USB port

Compatible for charging cell phones, tablets and some other portable devices

Battery level indicator

The level of battery power will be indicated by the LED display on the top of the pedal.

0% - Red flashing (charge it up!)

0-30% - Red

30-60% - Yellow

60-100% - Green Charging - Flashing above color to show status

Connection Reference

Introduction: JOYO JP-05 power supply has 8 DC outputs and 1 standard USB output, one of the 8 outputs can be switched between 9V, 12V and 18V for the odd pedals in your collection that just want a little bit more voltage. The 5V USB output enables you to load your cell phone, iPad and other portable devices.

Specifications:

Input voltage: DC 9V, 2000mA

Output voltage: 9V,12V,18V, USB: 5V/1A

Output polarity: external positive and internal negative

Dimensions:146mm*65mm*35mm

Weight: 620g.

Package included:

1x JOYO JP-05 Guitar Pedal Power Supply

1x DC 9V 2A Charger Adapter

1x Reversed Polarity Cable

8x DC Power Cable

1x User Manual.