12 best vox distortion pedals

Product description

Valve distortion pedal with all-analog signal path Tight and precise modern metal tones Powered by Nutube Three output modes for use as a pedal or preamp Selectable analog cabinet simulator OLED display with oscilloscope Active EQ to shape your signal

• PEDAL: The iconic amp sounds for your pedalboard. The Cutting Edge valve distortion pedal offers aggressive saturated and precise modern metal tones in a compact pedal format, powered by Nutube for warm and responsive amp-like tones
• FEATURES: Inspired by the meticulous and tight tones heard on modern metal records, the Cutting Edge goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analog signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics
• MODES: Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analog cabinet simulator. Use Standard mode to transform your amp, or use Pre-amp or Cab-Sim mode while recording directly into your audio interface. In each mode, the all-analog design and active EQ allow you to perfectly dial in the sound you need in any situation
• DISPLAY: This pedal is equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using
• BENEFITS: The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a standard 1/8-inch stereo cable will link 2 pedals, and using a stereo 1/8-inch splitter will link 3 or 4 pedals

Product description

The iconic amp sounds for your pedalboard. The Copperhead Drive valve distortion pedal offers the powerful crunch of British full-stack amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones.

Features

Inspired by thick and punchy British amp tones, the Copperhead Drive goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analog signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics. Plus, the OLED display shows an oscilloscope while the pedal is active or bypassed, allowing you to understand exactly how your signal is affected.

Modes

Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analog cabinet simulator. Use Standard mode to transform your amp, or use Pre-amp or Cab-Sim mode while recording directly into your audio interface. In each mode, the all-analog design and active EQ allow you to perfectly dial in the sound you need in any situation.

Benefits

The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a standard 1/8-inch stereo cable will link 2 pedals, and using a stereo 1/8-inch splitter will link 3 or 4 pedals. This allows you to turn one pedal on while bypassing the others as if you were switching between channels of a guitar amp.

OLED Display

This pedal is equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using.

• PEDAL: The iconic amp sounds for your pedalboard. The Copperhead Drive valve distortion pedal offers the powerful crunch of British full-stack amps in a compact pedal format, powered by Nutube for warm and responsive amp-like tones
• FEATURES: Inspired by thick and punchy British amp tones, the Copperhead Drive goes beyond the amp-in-a-box category to offer a truly flexible valve distortion pedal. The all-analog signal path and Nutube allow for genuine overdrive and distortion tones with the feel of a real tube amp, while internally boosted voltage gives greater headroom and dynamics
• MODES: Three output modes allow you to use this as a standard pedal, a line-level preamp, and a direct amp-sim using the built-in analog cabinet simulator. Use Standard mode to transform your amp, or use Pre-amp or Cab-Sim mode while recording directly into your audio interface. In each mode, the all-analog design and active EQ allow you to perfectly dial in the sound you need in any situation
• DISPLAY: This pedal is equipped with a high-contrast OLED display showing an oscilloscope, a visual indication of how the waveform is affected by the knob settings. This display shows which mode you are currently using
• BENEFITS: The Channel Link feature allows you to chain two or more Valvenergy pedals together, through the Link jack of each pedal. Using a standard 1/8-inch stereo cable will link 2 pedals, and using a stereo 1/8-inch splitter will link 3 or 4 pedals

• The JOYO Advantages: over 14 years of brand history, strong technical teams, many innovative patents, electroacoustic core technology, guide design of music masters, winning the love of global fans, inspiring people's music dreams.
• JF-13 AC Tone pedal reproduces the sound of a Vox AC30 amplifier -- that classic British rock sound all guitarists dream about.
• Features 6 knobs for full control of pedal dynamics easily. Aluminum alloy case with stoving varnish finish.
• Excellent tone guitar effects pedal while with light weight and user-friendly.
• What You Get:JOYO JF-13 AMP Pedal, detailed operating instructions and excellent customer service.

User questions & answers

Question:	Can the ac tone pedal bring some upper end sparkle to an otherwise flat lifeless katana amp
Answer:	Probably not. They appear to be a porous foam.
Question:	Can it use ac power or only battery
Answer:	This is only 3/4 length so it does not cover the ball of the foot.
Question:	I dont suppose this would be very useful with a vox ac15hwtv 50th anniversary handwired? i mean, it already has the vox sound, what might this add
Answer:	Likely not. These are not very firm, they are very thin and foam like. Also, you can't ever really "develop" an arch from flat feet on inserts alone, if it is painful, surgery may be needed. Since he is so young, now might be the best time to go to a podiatrist and get their opinion. I had the same issue when I was younger.

Product features

JOYO JF-13 AC TONE VINTAGE TUBE AMPLIFIER GUITAR EFFECT PEDAL

JOYO AC tone pedal really rocks our age!

Distortion is warm and natural, with subtlety in mind

• The JOYO AC Tone guitar effect pedal is based on the AC-30 tube amplifier, which revolutionizes the electric guitar sound with just a little help from two mop-top multi-instrumentalists.
• The fab sound is easy to nail with this little tone machine. Featuring endless controls, bypass wiring and components of only the highest quality, the pedal can put in more than a hard day's work. This pedal can make your clean sound sparkle by thickening the mid-range and adding as much top end bite as you can take.

Aggressive warmth and a natural sounding overdrive

• The AC Tone pedal from JOYO really captures something usually missing from most modern guitar sounds: subtle to aggressive warmth and a natural sounding overdrive. With the unique "voice" control you can dial in never before heard tones. Level and drive controls add incredible range, while the 3-band eq offers even more flexibility when it comes to getting an original sound.

Bypass circuit design

• So you want the purest sound possible? Just step on this stompbox to activate the bypass option.

• Level and Drive controls add incredible range.
• Modeling achieves famous VOX AC-30 tone.
• Reproduces the sound classic British rock sound all guitarists dream about.
• Distortion is warm and natural, with subtlety in mind.
• 6 knobs allow complete control over pedal dynamics

User questions & answers

Question:	I know it’s a matter of opinion but where would the best place for this pedal in the signal chain? Along with delay, distortion, tremolo, etc
Answer:	I own a Katana amp and I also have this Joyo AC tone pedal. I do not use them together but I like them both for what they are. The AC Tone works fantastic as a DI or on my board with a pedal sized amp. Explore the configuration inside the Katana... brightening up the sound can be done with the available EQ and Boss Tone Studio software.
Question:	What are the different "Voice" settings on this sim pedal
Answer:	Any 9-volt DC power supply with a negative center will power it. This is the most common type of power and connector type in the pedal market. It's also possible to use batteries, though with frequent use it's likely the battery will not last very long.
Question:	Is it a pedal or amplifier? Can it drive a cab
Answer:	Hello customer, this is the pedal that simulate the Vox AMP, so if you already have VOX amp, there is no need to have this pedal, welcome to our store AITONE for other cool JOYO pedals, we are the official store of JOYO and have the latest products of JOYO, welcome to visit.
Question:	How reliable are these things? Do they last
Answer:	My guess would be Medium. I bought that size to fit a size 9.

Product features

JOYO AC Tone Vintage Tube Amp Sim Pedal

JF-13 AC Tone guitar effect pedal based on the AC-30 tube amplifier that with a little help from two mop-top multi-instrumentalists, revolutionized the electric guitar sound, JOYO AC Tone pedal really rocks our age.

The JOYO AC Tone pedal really captures something usually missing from most modern guitar sounds: subtle to aggressive warmth and a natural sounding overdrive. with the unique "Voice" control you can dial in never before heard tones.

Distortion is warm and natural, with subtlety in mind

JOYO AC TONE has 6 knobs! many combinations are possible. This pedal can make your clean sound sparkle by thickening the mid range and adding as much top end bite as you can take (or take away), while the distortion it offers is straight out of the USSR.

Featuring endless controls, bypass wiring and components of only the highest quality, the pedal can put in more than a hard day's work.

Level and drive controls add incredible range

Level and Drive controls add incredible range, while the 3-band EQ offers even more flexibility when it comes to getting an original sound.

JOYO JF-13 definitely holds its own in any pedal chain, especially for guitar players with the desire to blend new and old.

About JOYO

• JOYO TECHNOLOGY is a professional company specializing in R&D, manufacturing and marketing digital products for music education.
• Our main products include: Effects Pedals, Guitar Amplifiers, Tube Amplifiers, Rock House, Metronomes, Tuners, EQ systems, Drum Practice Pads, Pedal Controllers, Synthesizers, Wireless Systems, Audio Cables and Portable Power Supplies.
• Through product R&D, and with the strong support of a number of industry specialists, JOYO possesses its own acoustic core technology and has applied for several utility patents. JOYO has cooperated with many famous musical manufacturers at home and abroad, and JOYO products have been received by customers with great appreciation and affection. With a young and energetic team, we are devoted to being the forerunner of professional digital products for music education all over the world. That's what makes JOYO an excellent choice!

• Level and Drive controls add incredible range.
• Modeling achieves famous VOX AC-30 tone.
• Distortion is warm and natural, with subtlety in mind.
• 6 knobs allow complete control over pedal dynamics.
• 6 knobs allow complete control over pedal dynamics
• Quality components, bypass feature with 9V battery (Not included).

User questions & answers

Question:	Could I plug this into my computer and use audacity to record
Answer:	If you have a recording interface, you should be able to just plug from the quarter inch out on the Joyo to the quarter inch in on the interface.If you are using the computers 3.5 millimeter input, just make sure you do trial run or two to set the Joyo's Level control so that it doesn't distort the pc input. You may also need adapters or cables to fit the actone and pc jacks in order use them together.
Question:	Can you bypass the cabinet simulator? is there a switch for that? (in case i want to use it with a guitar amp instead of direct to pa
Answer:	Oh yeah, for bypassing the simulator you press on the switch and it turns the pedal off/on. you can use this as a preamp or a drive to get the AC flavour. The pedal itself isn't a cab simulator but more so copies the AC variety like a Drive pedal. The voice knob is the control for shaping the sound of the amp styles (inside the pedal) (I personally enjoy having the voice at 10o'clock.) I think this will do fine going into your chain and out to an amplifier. Hope this helps!
Question:	I was wondering how much signal gain/boost this pedal is capable of? Looking to get an instrument level close to line level to feed a headphone amp. TIA
Answer:	I'm not sure on a technical level how much signal boost this pedal can provide, and I've seen nothing online either, but I've used it straight into a PA without a guitar amp (it's an amp simulator so that sounds pretty good) and it had more than enough signal to work with.
Question:	hi...is this good for bass
Answer:	Ran bass through it straight into the PA. Turned effects off and it sounded really good. Used for worship. Typically play guitar and have several pedals on my board with this the last pedal on board. Bypassed all pedals for bass. Ran bass into the input and out to the PA.

Product features

JOYO AC Tone Vintage Tube Amp Sim Pedal

JF-13 AC Tone guitar effect pedal based on the AC-30 tube amplifier that with a little help from two mop-top multi-instrumentalists, revolutionized the electric guitar sound, JOYO AC Tone pedal really rocks our age.

The JOYO AC Tone pedal really captures something usually missing from most modern guitar sounds: subtle to aggressive warmth and a natural sounding overdrive. with the unique "Voice" control you can dial in never before heard tones.

Distortion is warm and natural, with subtlety in mind

JOYO AC TONE has 6 knobs! many combinations are possible. This pedal can make your clean sound sparkle by thickening the mid range and adding as much top end bite as you can take (or take away), while the distortion it offers is straight out of the USSR.

Featuring endless controls, bypass wiring and components of only the highest quality, the pedal can put in more than a hard day's work.

Level and drive controls add incredible range

Level and Drive controls add incredible range, while the 3-band EQ offers even more flexibility when it comes to getting an original sound.

JOYO JF-13 definitely holds its own in any pedal chain, especially for guitar players with the desire to blend new and old.

About JOYO

• JOYO TECHNOLOGY is a professional company specializing in R&D, manufacturing and marketing digital products for music education.
• Our main products include: Effects Pedals, Guitar Amplifiers, Tube Amplifiers, Rock House, Metronomes, Tuners, EQ systems, Drum Practice Pads, Pedal Controllers, Synthesizers, Wireless Systems, Audio Cables and Portable Power Supplies.
• Through product R&D, and with the strong support of a number of industry specialists, JOYO possesses its own acoustic core technology and has applied for several utility patents. JOYO has cooperated with many famous musical manufacturers at home and abroad, and JOYO products have been received by customers with great appreciation and affection. With a young and energetic team, we are devoted to being the forerunner of professional digital products for music education all over the world. That's what makes JOYO an excellent choice!

Product description

The Vox Stomp Lab series of effect pedals, of which the Stomp Lab IIG modeling guitar pedal is a part of, are impressive new contenders that pack powerful sounds into compact and sophisticated looking metal bodies. Sound variations are categorized by style, such as rock, blues, and ballad, making it easy for even novice users to recall the desired sound. With high-quality looks, plus its high quality sound, the Stomp Lab series will be a great companion for the guitarist or bassist for years to come. Multi-effects units contain an incredibly diverse array of sounds that range from distorted to clean, and the sheer number of these sounds can be staggering. Although having a large number of sounds is a great advantage, it can also overwhelm the novice user, causing difficulty or confusion. The Stomp Lab series is designed to be easily usable, even by novice players. Since each program is named with a musical style, such as rock, blues, or metal. You’ll be able to find the perfect sound without being concerned with specific effect names. The musical styles are categorized into ten types, and cover everything from straight-ahead traditional styles to quirky, unusual sounds. There are ten variations for each category, so you're sure to find sounds you like.

• A total of 100 preset programs are categorized into styles such as rock, blues, metal, and pop.
• Easy to use interface; even novice users can instantly access the sounds they want.
• Stomp Lab IIG provides 103 types of modeling effects.
• Each effect model boasts a sound engine that has been distilled from the worldwide best-selling VT+ series of modeling amps as well as the Tone Lab. series of multi-effect units.
• Edit and save 20 of your own user programs.

User questions & answers

Question:	Can you run a bass through this board? Already have it, and I only will play bass for a gig
Answer:	You're absolutely correct, it's a matter of opinion. For me, this is my amp (I use it for playing with headphones with other pedals) and it is the foundation of my tone, so I place it first, then add tremolo, delay, reverb after it. Sort of like an effects loop in a real amp. Sounds great to me, and I love the responsive EQ for adapting to different guitars and pickups! My logic is, you dial in a sweet tone with this pedal, and everything after it sounds good. But people place entire pedalboards before their amp inputs, so there will be other opinions.
Question:	Will this work on a line 6 amplifier
Answer:	It provides a huge pallet of sounds: from great cleans into breakup tones. It is very flexible and just by itself>mixer provides a sufficient and low-noise sound.
Question:	Does this pedal have a built in guitar tuner
Answer:	This a pedal. It will NOT drive a cab. It simulates the sound of a VOX AC30 amplifier.
Question:	Is this a "Stereo" Pedal. w/ Ping Pong type delay
Answer:	They seem very solid. Jacks are very firm, switch is sturdy, knobs have a nice feel with slight resistance. Nothing loose or flimsy feeling. I have the AC Tone and the American Sound, but I use them in a home studio, so they aren't on the road getting stomped on every night. I do think the sound and build quality are amazing for the price. If it breaks... you could buy 5 of these for the price of a pedal from a US company. These are my opinions, I'd still ask someone who's abused them if you plan to.

Product features

Vox StompLab 2G

The StompLab series of effect pedals are impressive new contenders that pack powerful sounds into compact and sophisticated looking metal bodies. Sound variations are categorized by style, such as rock, blues, and ballad, making it easy for even novice users to recall the desired sound. In addition to the StompLab IG’s dedicated guitar modeling and the StompLab IB's dedicated bass modeling, the lineup also includes the StompLab IIG and IIB which provide an expression pedal. With high-quality looks, plus its high quality sound, the StompLab series will be a great companion for the guitarist or bassist for years to come.

The massive success achieved by VOX in the 1960s laid the foundation for the legacy that continues to thrive nearly 60 years later. The sound of VOX amplifiers has left a lasting impact on popular music that still reverberates today. The most influential artists in the world continue to rely on VOX amplifiers to deliver world-class tone in the finest studios and on the biggest stages around the globe. Find your voice with VOX.

Product description

Fiery sounding and flexible, The pugilist distortion is ready to add some heavyweight gain to your rig. This original design features dual gain engines-with independent tone controls for each-letting you select multiple variations of distortion, ensuring this pedal will play well with any rig. Series/blend switch lets you stack channels for thick, cascading distortion, while the bass boost switch fattens up your tone. The blend control mixes the two channels to get the best of both worlds, crafting a sound just for you.

• Dual gain engines
• Discrete tone controls per channel
• Led backlit knobs
• Fender amp Jewel LED
• Magnetically latched hinged 9V battery door

User questions & answers

Question:	I'm new at this, how do you connect this system between the amp and my guitar
Answer:	you could run a bass thru this, I just don't think it would be the best sound for a BASS, I WOULD GO DIRECT !
Question:	Is this 9v, 12v, or 18v
Answer:	Never tried, but I don't see why it wouldn't.
Question:	Is there a tap tempo
Answer:	It does. Press in both buttons, at the same time to activate it. You will need to watch the video on YouTube to learn how to set up your own sound. This thing is not user friendly when it comes to that sort of thing.
Question:	Does the Pelt come with a power cord
Answer:	The actual answer is: Audio output: OUTPUT/PHONES (stereo). Straight from the manual.

Product features

Dual Gain Engines

Dual gain engines-with independent tone controls for each-make it easy for you to dial in your sound. A Series/Blend switch lets you stack engines for brutal tone.

Blend Control

The Pugilist Distortion's Blend control mixes your dry and effected signals to taste, bringing out your pick attack to create complex, articulate tone with lively transients.

Tone Controls

The versatile per-channel tone controls not only let you shape your sound exactly, they also make it easy to use this pedal with any amp-even one with a Bright switch.

LED-Illuminated Knobs

LED-illuminated knobs show your control settings at a glance-even on dark stages.

Magnetic Battery Door

The exclusive, 'patent applied for', magnetically latched 9V battery door makes it quick and easy to swap batteries.

Stage-Ready Construction

Every Fender effects pedal is crafted from lightweight, durable anodized aluminum-they'll easily withstand the rigors of touring.

Product description

Save with this Bundle:MXR M116 Fullbore Metal Distortion Pedal w/4 FREE Cables DUNLOP M116 MXR FULL BORE Ultimate riff power is yours with the Fullbore Metal Distortion pedal from MXR. This compact but powerful device is all you need to unleash the most devastating contemporary metal guitar tones ever heard. The Fullbore Metal turbo-charges your guitar signal with lethal amounts of ultra high gain. This is combined with a built-in Noise Gate to knock out the noise associated with extreme gain levels while also adding definition and tightness to syncopated metal riffs. Power: Dunlop ECB003 AC Adapter or Single 9 volt battery Strukture S6P48 R-Angle Patch Cable, 48pc. We selected the top-selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The rubber outer covering is reinforced by a state-of-the-art shrink-wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on. Features Right angle 1/4 connectors, perfect for pedal boards 6mm woven or rubber sleeve Shrink wrapped solder point Strukture SC10W - 10ft Instrument Cable, 6mm Woven We selected the top selling cables in the industry and eliminated as much packaging cost as possible without sacrificing quality. The woven outer covering is reinforced by a state of the art shrink wrap sleeve to resist separation at the termination points. Finally, we use the highest quality solder connections, which are protected by a thick ABS inner sleeve, to create a cable you can count on. Features High quality woven outer covering State-of-the-art shrink-wrap sleeve Thick ABS sleeve protects solder connections Length: 10'

• Includes 4 Cables!
• Three band EQ with sweepable mid frequencies
• Tight, fast, switchable Noise Gate for syncopated metal riffage
• Internal Gate Trigger control lets you set the Noise Gate's sensitivity
• Scoop Switch boost the highs and lows while the EQ stays active

User questions & answers

Question:	Does it come with a power cable
Answer:	It is vacuume sealed, therefore, you have to use scissors to cut it open. Once you open than, this mattress pad become so big and it is impossible to put it back to the same package bag. You need your own storage bags for this.
Question:	What are the lengths of the included cables
Answer:	Yes. I bought a Tempurpedic and it was too hot without the mattress pad. This one is not too thick or too thin. I really like it.

Product description

Bob Weil and Visual Sound first introduced the Jekyll & Hyde pedal to the world in 1997. It was the first true dual effect pedal for guitar players, ever. It was an immediate hit and the rest, as they say, is history. Visual Sound is now TRUETONE, and the new V3 Series Jekyll & Hyde has been re-designed from scratch by Weil and RG Keen to meet the demands of today's players. With more flexibility, more great tones, and better construction than any of its predecessors, you're going to love this new incarnation of a historically great pedal.

• Each channel can be set to either True Bypass mode or buffered, via internal switches. The buffered mode utilizes our legendary Pure Tone circuit.
• Features the custom designed Forever Footswitch rated for 10 million hits. This interacts with relays having gold-plated contacts.
• Lifetime Warranty... even for second or third owners.
• Separate inputs and outputs so each side of the pedal can be used in a loop device, or midi switcher. Also possible to reverse the order of effects with a patch cable. Just like having 2 pedals, but in 1 housing.
• Small, pedal board friendly size, with front mounted jacks. Smaller footprint than 2 MXR or similar sized pedals.

User questions & answers

Question:	Why it cannot ship to new zealand
Answer:	Description says tap tempo - no?
Question:	What voltage does it needs
Answer:	no

Product description

The Dunlop Crybaby is the original - the one that created some of the most timeless sounds in rock. When people talk about wah pedals, they're talking about the Crybaby. Relied on by Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour, and many other greats. Features: Heavy die cast construction for years of reliability, 100k ohm Hot Potz potentiometer that allows for that quick, abrupt wah sound. Powered by the Dunlop ECB-03 AC Adapter and/or 9 volt battery. The Crybaby has been a standard in the world of music since its introduction in the late 1960's. Its rugged construction and efficient design will give years of outstanding performance.

When people talk about wah pedals, they're talking about the Crybaby. This is the original--the one that created some of the most timeless sounds in rock.

The original. Click to enlarge.

Power the CRYBABY with a 9-volt battery or optional adapter.

The Original Wah

The CRYBABY has been a standard in the world of music since its introduction in the late 1960's. Its rugged construction and efficient design have graced the foot of Jimi Hendrix, Eric Clapton, Buddy Guy, David Gilmour, and many other guitar greats.

Wah Versatility

By rocking your foot back and forth on the pedal, you can change the effect that the CRYBABY has on the tone of your instrument instantaneously. Toe down will give you more treble, heel down will give you more bass. The speed and amount of effect you use depends on your style of playing.

When placing the pedal in one position, you will hear a boost in that particular frequency. This boost can be used to add sustain and create feedback of a desired overtone.

Solid Construction

The CRYBABY features a heavy, die-cast construction, for a road-ready wah pedal that'll provide years of reliability.

Hot Potz Potentiometer

The original CRYBABY boasts a 100K ohm Hot Potz potentiometer, built to last and providing you with a quick, abrupt wah sound.

Powering Options

Power the CRYBABY with a 9-volt battery, or grab an optional Dunlop ECB-003 AC Adapter for powering via outlet.

One-Year Warranty

Dunlop provides extra peace of mind by offering a one-year warranty from date of purchase.

What's in the Box

Dunlop Original Crybaby Wah, User's Manual

• Heavy Die Cast Construction
• Powered by the Dunlop ECB-03 AC Adapter (not included) and/or 9 volt battery
• Dimensions: 10" x 4" x 2-1/2"
• Weight: 3.7 lbs.
• Color: Black

User questions & answers

Question:	Can it fit on most pedal boards
Answer:	It is the full size. I have put one on my boards. It is on the heavy side, so be prepared for the weight. Most players put it on the right side of the board and use their right foot.
Question:	Hello! as never bought the site , i wonder how much is charged to deliver in brazil (freight + tax) ? it's all calculated upon purchase
Answer:	Sorry We don't ship to Brazil
Question:	If I buy this, would I have to buy anything else for it to function
Answer:	You need to buy a power source which is either an adapter or a 9 volt battery. I went for the battery, so it's not a big of an issue, just the battery will do it. In the box, there's no battery included.
Question:	Where are these made
Answer:	In a factory

Product description

Multi-effects processor with 70+ effects, 13 amp models, 68 drum patterns, Looper, and expression pedal.

• 71 built-in guitar effects and 13 amp models
• Free download of Zoom guitar lab Mac/Windows software
• 30-Second looper
• 68 built-in rhythm patterns
• Standard Guitar input, aux input for external audio players and amp/headphone output

User questions & answers

Question:	Does the usb port mean it has interface capabilities (can i record with it without an audio interface to pc
Answer:	The PC recognizes the USB connection as a MIDI interface, which can be used to switch between patches.
Question:	Can you delete only the previous loop that you recorded instead of the whole loop
Answer:	No you can not delete part of a loop. In some other loopers you can undo one or more previous loops, but with the G1on you can not. When you delete a loop that was made on top of a a rhythm loop all the loops get deleted. It kind of sucks! This is about the only fault I can find w/ the G1on.
Question:	I just bought a digitech-360 and found out i can't use the looper with the drum machine.. can you use the drums with the looper on this unit
Answer:	Yes you can select a drum pattern and start playing it, then switch to looper mode and record while playing to the drum sounds. The drum sounds don't get recorded though, but you can play to the beat unlike the digitech 360.
Question:	whats the difference between this and spending hundreds on different pedals
Answer:	Lol! A lot, and not that much. This makes for an excellent practice pedal/tone lab. It's perfect for trying out different sounds and pedal combos and learning about basic signal path for FX. Some people even gig with this unit, though the G3X and G5X are considered more "Pro. Grade" though they have basically the same FX engine. Picking, buying, and building your own custom boutique pedal board is also rewarding and can provide some more unique and better quality FX... But you can literally spend hundreds and hundreds of dollars. Plus you'll need to try out the different pedals and build out a board. But individual pedals does give you flexibility DURING a performance. Note that the G1Xon has only two stomps and a wah. (Look at the manual, it's more complicated than that.) But basically (tl:dr) if you already know what sounds you want and you're a professional, spend hundreds on different pedals. If you want to experiment with different tone/FX and are primarily rehearsing and doing house of worship & coffee houses, buy the G1Xon.

Product features

Zoom G1X Four

The Zoom G1 Four and G1X Four feature over 70 effects and amp models, looper and drum machine. Plus, access ZOOM Guitar Lab’s additional library of downloadable effects. Plug in and be amazed!

X is for Xpression

The G1X Four comes with ZOOM’s expression pedal, which provides control over effects such as volume, wah, delay and pitch.

Stay Looped In

The built-in looper can record up to 30 seconds of playing, allowing you to create dynamic, multi-part arrangements.

Your Favorite Amps & Cabinets

With 13 classic amps and cabinets like Fender, Marshall, Orange and more, the G1 series brings big stage sound wherever you go.

Sounds That Inspire

The G1X Four has more than 60 traditional and boutique effects, including ring modulator, pitch-shifting delay and even sitar simulation.

Auto Patch Backup

Your patches and level settings are instantly backed up when using the Auto Save function, ensuring you never lose your latest creation.

Off the Floor

The G1 Four/G1X Four’s control panel is also designed for hands-on, desktop use. Dial in tones and adjust level settings with absolute precision to craft your perfect sound.

Power Options

The G1 Four/G1X Four runs on just four AA batteries. Alternatively, it can be powered using the optional Zoom AD-16 AC adapter or via USB bus power.

G1X Four Specifications

Maximum number of simultaneous effects: 5

User patches: 50

Sampling frequency: 44.1 kHz

A/D conversion: 24-bit, 128× oversampling

D/A conversion: 24-bit, 128× oversampling

Signal processing: 32−bit

Display: 128x32 dot matrix LCD

Input : Standard mono phone jack Rated input level: -20 dBu Input impedance (line): 470 kΩ

AUX IN : Stereo mini jack Rated input level: -10 dBu Input impedance (line): 1kΩ

Output: Standard stereo phone jack (combined line/headphone) Maximum output level: Line +2 dBu (10 kΩ or more output impedance) Headphones 17 mW + 17 mW (32Ω load)

Product description

The Fuzz Face Mini pedal line features legendary Fuzz Face tones in smaller, more pedalboard-friendly housings with several modern appointments: true bypass switching, a bright status LED, an AC power jack and a convenient battery door. The FFM1 Silicon Fuzz Face Mini is spec’d from a 1970 Fuzz Face in our own collection prized for its bright and aggressive Fuzz Face sound delivered by its matched BC108 silicon transistors.

• Silicon transistors spec’d from a 1970 Fuzz Face
• Legendary Fuzz Face tones in a pedalboard-friendly housing
• Status LED, AC power jack & battery door

User questions & answers

Question:	does this come with ac adaptor
Answer:	9v is all it needs
Question:	Will it work with a solid state? (Marshall 30 watt ss
Answer:	Run your cable from the guitar to the input on this pedal ... it's on the right side. The output on the left will then run to your amp.
Question:	Does the battery compartment have a cover on it, such as a plastic door or snap cover
Answer:	9v