8 best bathroom safety bars

Product description

Overview

ZUEXT 2 Pack 16 inch Concealed Screw In Non-slip Chrome Stainless Steel Shower Grab Bar with classic knurled surface design to bring safety and stability to your bathroom/garage/doorway.With only two screws required per side for a secure mount, the 3 hole flange gives you installation flexibility for your unique safety grab bar mounting needs.



Measuring 16 inch in length, this 1.0 inch diameter grab bar is fully ADA compliant and rated for up to 500 pounds.Accidents can occur, but be ready before they happen.Make bathroom safety a part of your home d¨¦cor. Being safe is easier than you think.



Easy Installation with Secure Mount Anchors:

Enjoy greater peace of mind in the bathroom with ZUEXT 16-inch Shower Safety Handle.It supports up to 500 pounds and provides a reliable handhold whether you're showering, bathing, or using the toilet.

It also features a secure mount design that allows for easy, secure installation at any angle and helps ensure proper alignment.

Durable, Reliable, Anti-slip, Rust Proof and Stylish

Constructed from durable rustproof stainless steel, it features a corrosion-resistant knurled finish to ensure lasting performance.Stylish end covers conceal the mounting hardware for a clean seamless look.The

Non slip knurled surfaces on the middle to coordinate beautifully with most bathroom finishes.



Package:

2x 2 Pack 16 Inch Stainless Steel Shower Grab Bar

1x Manual

1x Screws



How to Install Wall Mounted Safety Bar?

Step 1: Locate wall studs where you want to install the bath/shower safety handle;

Step 2: Drill holes through the ceramic tiles or tub enclosure into the studs to start the screws;

Step 3: A cover plate can be slide over the mounting plate with the holes;

Each end has flat plate with 3 holes in each. Thus grab handle can be fastened with screws or bolts to a wall or a cabinet.

• ZUEXT 2 Pack 16 Inch Chrome Finish Knurled Textured Anti Slip Stainless Steel Shower Grab Bar; the non slip knurled surfaces on middle is superior for safety when you have soapy hands and need to steady yourself
• Able to support up to 500 lbs of pull force to provide a stable, reliable handhold; Made of stainless steel for a lasting strength and quality.
• Concealed secure mount design allows for easy, secure installation at any angle, allows you to cover any unsightly screw holes and continue a clean, sleek trend to your bath and shower.
• Use safety grab bars in the bathroom, kitchen, along stairways, or in the laundry room for additional fall prevention, especially for the handicap, elderly, pregnant women, and children. Not only apply to use as bath shower grab bar, but also can hold clothing,towel and etc.
• The total length is 16 inch. 1.0 inch bar diameter allows enough space to easily grip bar for added support
• Complies with ADA specifications; Backed with ZUEXT's 5 Years of Free Replacement Warranty

User questions & answers

Question:	can I install this to a fiberglass/ vinyl shower stall
Answer:	Hello, the sign, plates and other items are sold separately! Thanks!
Question:	Is the non slip diamond shaped, as those hurt hands
Answer:	Unfortunately no.
Question:	I only received 3 of the 4 bolts that attach thegrab bar to the base plate. Can you tell me what size bolt to get
Answer:	Yes, writing is smooth and there is plenty of room!
Question:	Ok, description says 12 inches and amazon selection tab shows 16 inches. which one is it for certain? can't get it wrong. needs to be 100% accurate
Answer:	Its attached. But not difficult to write on the second page.

Product description

Enjoy greater peace of mind in the bathroom with the Moen 18 inch Grab Bar. This ADA grab bar measures 21. 25 inches in total and supports up to 500 pounds. Its 1. 5 inch diameter provides a reliable handhold whether you're showering, bathing, or using the toilet. It also features a SecureMount design that allows for easy, secure installation at any angle. Thanks to its durable stainless steel construction, this bath grip provides lasting performance. This Moen Home Care SecureMount 18-inch, 1-1/4 inch grab bar will give you stability and reassurance in the bathroom. Durable, ADA-compliant design combine innovative function with a look that easily coordinates with the style of your bath. This product has a stainless steel finish and has concealed screws. The SecureMount design allows you to anchor with or without studs. The patented flange design makes it easy to connect to the stud at multiple points. The bar is built to withstand up to 500 pounds of weight, which exceeds the ADA requirement.

From the Manufacturer

This Moen Home Care SecureMount 18-inch, 1-1/4 inch grab bar will give you stability and reassurance in the bathroom. Durable, ADA-compliant design combine innovative function with a look that easily coordinates with the style of your bath. This product has a stainless steel finish and has concealed screws. The SecureMount design allows you to anchor with or without studs. The patented flange design makes it easy to connect to the stud at multiple points. The bar is built to withstand up to 500 pounds of weight, which exceeds the ADA requirement.

• VERSATILE DESIGN: Polished Stainless finish is highly reflective for a mirror-like look that works with any decorating style
• SUPPORTIVE DESIGN: Bathroom grab bar supports up to 500 lbs when installed in a stud or when using SecureMounts (not included)
• SAFE AND SECURE: Optional SecureMount design for easy, secure installation (sold separately)
• PEACE-OF-MIND: Designed for hassle-free installation
• BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty
• SIZE: 18-Inch Bar Length; 1.5-Inch Diameter

User questions & answers

Question:	Does the Moen R8932P grab bar include the SMA1005CH secure mount? If not, are they compatible if I purchase both
Answer:	I would think so. It’s adjustable to fit almost any standard tub. It’s is very sturdy once it has been installed and tightened.
Question:	is the size 1.25 or 1.5? Your add give both sizes for the
Answer:	I do not see why not ...just watch on how much you tighten the rail onto the tub for you don't want to crack the sides of your tub ...I do feel you can use the rail on your tub safely and can tighten it enough to use this rail to use safely....
Question:	does the 30 inch have a textured grip
Answer:	No, the bar itself is smooth metal.
Question:	Is the color peened, brushed nickel
Answer:	If you position the side with the dial to tighten it on the inside of the tub it should work

Product features

Dedicated product development and design

For over 80 years, Moen has been dedicated to designing products that you can rely on for a lifetime. Complete your entire home with a vast collection of products you can trust, from kitchen and bathroom faucets, to bath accessories and smart home technology.

Personalize your look with a variety of finishes

Moen offers a wide range of finishes to choose from: rich, antiqued bronzes, classic chrome, subtle, warm nickels, and more bold, modern finishes, like black and gold. Make a statement in any room with the perfect finishing piece thanks to Moen’s breadth of high-quality and durable finishes.

Innovations to power your most meaningful moments

At Moen, the customer is at the center of our design process. The needs and insights of our customers drive the development of delightful, innovative technologies that help make everyday tasks just a little bit easier, such as motion-sensing technology in the kitchen, and temperature-controlled showers started from an app.

Moen Kitchen Solutions

Prepping for family dinners. Bathing the baby. Watering the plants. It should come as no surprise that you spend more active time in the kitchen than any other room in the house. And from finishes to innovations to installation, there are plenty of reasons why Moen is the right choice for your kitchen. From faucets and sinks to filtration systems and garbage disposals, Moen has endless products to fit seamlessly into your kitchen. And with meaningful innovations like boosted spray power with Power Boost or hands-free convenience with MotionSense, you’ll love how Moen products bring not only endless style opportunities, but also in-demand functionality.

Your Bathroom by Moen

From small, intimate powder rooms to large, luxurious master baths, small changes in your bathroom can make a big difference in refreshing one of the busiest rooms in the house. Focus on the details with Moen products, and you'll be able to customize this space - making it more stylish, while reflecting your personal taste. From bathroom sink faucets and tub fillers to bath safety and accessories, Moen has endless products to fit seamlessly into your bath. And with meaningful innovations like easy and fast faucet installation with M-PACT or integrated ink stamps on your bath accessories showing you where to drill with Press & Mark, you’ll love how Moen products bring not only endless style opportunities, but also in-demand functionality.

Shower Innovations by Moen

A shower wakes you up, soothes your senses or relaxes your body - and it starts the minute you step into the water. It is your sanctuary, a private place for you to unwind from your day or re-energize yourself to start anew. Start creating your new personal shower space by choosing Moen fixtures that give you modern styles and innovations. From handheld showers and rainshowers to slide bars and body sprays, Moen has endless products to fit seamlessly into your shower. And with meaningful innovations like effortless docking with Magnetix or the best rainshower experience possible with Immersion technology, you’ll love how Moen products bring not only endless style opportunities, but also in-demand functionality.

Moen Smart Home Technology

At Moen, we put the customer at the center of everything, including our design process. Their needs and insights drive the development of delightful, innovative products and technology that help to make everyday tasks just a little bit easier. With meaningful innovations like water throughout your home monitored and controlled with an app or perfectly warm and steamy showers you can start with your voice, you’ll love how Moen products bring not just in-demand functionality, but also the latest in tech trends.

Product description

Overview

ZUEXT 16 inch wall mount Concealed Screw Stainless Steel Grab Bar combines quality, strength and durability with a classic design to bring safety and stability to your bathroom without sacrificing style. With only two screws required per side for a secure mount, the 3 hole flange gives you installation flexibility for your unique grab bar mounting needs.



This 1.0 inch diameter grab bar is fully ADA compliant and rated for up to 500 pounds. Accidents can occur, but be ready before they happen. Make bathroom safety a part of your home d¨¦cor. Being safe is easier than you think.



Easy Installation with Secure Mount Screws and Anchors

Enjoy greater peace of mind in the bathroom with the ZUEXT 16-inch Grab Bar. It supports up to 500 pounds and provides a reliable handhold whether you're showering, bathing, or using the toilet.

It also features a secure mount design that allows for easy, secure installation at any angle and helps ensure proper alignment.



Durable, Reliable, and Stylish

Measuring 16 inches in length and 1.0 inches in diameter, constructed from durable stainless steel, it features a corrosion-resistant finish to ensure lasting performance. Stylish end covers conceal the mounting hardware for a clean, seamless look.



What's in the Box:

1x 16 Inch Stainless Steel Shower Grab Bar

1x Self-adhesive Stick-on Hook (2.3 x 2.3 inch, support up to 22 lbs weight)

1x Installation Screws Bag



How to Install This Safety Bar?(Pls refer to photo instructions)

Step 1: Locate wall studs where you want to install the handle;

Step 2: Drill holes through the ceramic tiles or tub enclosure into the studs to start the screws;

Step 3: A cover plate can be slide over the mounting plate with the holes;

Each end has flat plate with 3 holes in each. Thus handle can be fasted with screws or bolts to a wall or a cabinet.

• 16-Inch Stainless Steel Safety Grab Bar,installation screws and anchors are included.Each ZUEXT 16 inch shower handle comes with a free self-adhesive stick-on hook which can support up to 22lbs weight
• Able to support up to 500 lbs of pull force to provide a stable, reliable handhold; Made of stainless steel for a lasting strength and quality.
• Concealed secure mount design allows for easy, secure installation at any angle, allows you to cover any unsightly screw holes and continue a clean, sleek trend to your bath and shower
• Use safety grab bars in the bathroom, kitchen, along stairways, or in the laundry room for additional fall prevention, especially for the handicap, elderly, pregnant women, injury, and children
• The total length is 16 inch. 1.0-inch bar diameter allows enough space to easily grip bar for added support
• ZUEXT 16-Inch Concealed Mount Safety Bath and Shower Grab Bar complies with ADA specifications; Backed with 2 Years of Free Replacement Warranty

User questions & answers

Question:	Where are they manufactured
Answer:	I think they are 10 by 2inch. I had to go to 3in. screws on part of my application. I also used a caulk around all the screws. You will probably need a stud finder?
Question:	Do Screws come in the box
Answer:	We had our builder do ours. He had to find a stud, for one end. Then, used Lag screws for other. This will help anchor, for safety. Hope this helps ;-)
Question:	Does this 12" bar ship assembled? With flanges attached? Shipped in a box or bag
Answer:	It is very useful and sturdy. It is easy to move but you have to test it occasionally to make sure it is secure. I have bought another one to use in second bathroom.
Question:	is the bar slippery when wet
Answer:	Yes. We have put the grab bar inside our bath tub below the water line. It is best to install the grab bar before you fill it with water. Make sure the surfaces are clean before installation, Always double check suction attachment strength before use. It seems suction strength is enhanced due to the combination of atmospheric pressure and water pressure on the suction cups.

• Plastic
• Imported
• 👍 【PLEASE READ THIS BEFORE YOU BUY】 - ✔ This Suction Grab Bar only works on tile size LARGER THAN 4x4", ✔ The suction discs can not be mounted on grout seams. ✔ Make sure there's no texture on the shower wall, ✔ The mounting surface must be flat, non-porous and smooth for any other applications.
• 👍 【NO TOOL REQUIRED INSTALLATION】 - This tool-free Suction Shower Bar is easy to install. .Clean the rubber discs and the surface it is to be attached to thoroughly. . Press as hard as possible against the wall till the green indicators show up. . Press down on the flip-up easy release tabs, you will feel negative pressure. The greater the pressure, the better the suction.
• 👍 【SAFE TO USE WITH INDICATORS】 - The indicators on the side of the suction cup will change from red to green when a safe and secure hold is achieved. Before each use, test the firm hold of the suction device. Ensure that both indicators are GREEN. If the adhesion seems insufficient, release the suction assist bar and reattach again.
• 👍 【PERFECT FOR ALL AGES】 - This could be a sweet gift for elderly parents/grand parents. Medical balance assist grip rail for tub/shower safety of elderly, kid, handicap, injured, pregnant...etc.
• 👍 【ONE-YEAR WARRANTY】 - These suction grab bars come with a one-year warranty against any manufacturing defects.

Product description

Enjoy greater peace of mind in the bathroom with the Moen 24 Inch Grab Bar. This ADA grab bar supports up to 500 pounds and provides a reliable handhold whether you're showering, bathing, or using the toilet. It also features a Secure Mount design that allows for easy, secure installation at any angle. And thanks to its durable stainless steel construction, this bath grip provides lasting performance and blends seamlessly with almost any interior decor. From the Manufacturer Moen SecureMount Stainless 24 Inch grab bar delivers a lightly brushed warm grey metallic look. It is ADA compliant and comes with a limited lifetime warranty. A Genuine Moen Product. Moen is dedicated to designing and delivering beautiful products that last a lifetime. Moen offers a diverse selection of kitchen faucets, kitchen sinks, bathroom faucets and accessories, and showering products. Moen products combine style and functionality with durability for a lifetime of customer satisfaction. Projection (Inches) - 3 Inches.

From the Manufacturer

Moen SecureMount Stainless 24-Inch grab bar delivers a lightly brushed warm grey metallic look. It is ADA compliant and comes with a limited lifetime warranty. A Genuine Moen Product. Moen is dedicated to designing and delivering beautiful products that last a lifetime. Moen offers a diverse selection of kitchen faucets, kitchen sinks, bathroom faucets and accessories, and showering products. Moen products combine style and functionality with durability for a lifetime of customer satisfaction.

• Coordinating Finish: Stainless finish coordinates with today's popular kitchen appliances and accessories
• Supportive Design: Bathroom grab bar supports up to 500 pounds when installed in a stug or when using SecureMounts (not included)
• Safe and Secure: SecureMount design for easy, secure installation (sold separately)
• Peace of Mind: Designed for hassle free installation
• Built to last: Backed by Moen’s limited warranty; 1.25" bar diameter
• Stainless finish delivers a lightly brushed warm grey metallic look
• Concealed screw

User questions & answers

Question:	Does this item come with the secure mount anchors , plastic guide sleeves mentioned in the video or must they be purchased separately
Answer:	The secure mount anchors and screws were included. I do not know about any guide sleeves.
Question:	Will be using as a door handle on a 1x3 board (really 2.5 inches). What is width of the flange/plate, please? Can't tell from product dimensions
Answer:	3 inches with bar in center.. It is a great product. Nice and sturdy when you have the studs behind...So plan well..
Question:	is this a 1-1/4 inch diameter
Answer:	Yes, it is a 1 1/4" bar diameter.
Question:	Should a grab bar be mounted vertically or horizontally, or does it matter
Answer:	Hi Martin, in my case, I needed the bar mounted horizontally, so if my hand slipped at one point, I could slide it on across the bar. The best answer is to decide which works best for you. Even an angle mount is popular in some applications. Mine also doubles as a towel bar, so I mounted it horizontally. Now, structurally, it's going to be the same...find the stud...and if needed, use the mounting kit..(priced separately, but worth it.) Hope this helps!

Product features

Moen 24-inch L-Shaped Grab Bar

Feel secure and steady in the bathroom with the Moen 24-Inch Grab Bar. For the bath, shower, or toilet, this ADA grab bar supports up to 500 pounds. Its SecureMount design allows for easy, secure installation at any angle. And with durable stainless steel construction, this bath grip provides lasting performance and complements a wide range of bathroom decor.

• BATHROOM SAFETY - The Vaunn Medical Bathtub Safety Rail provides support for individuals getting in and out of the bathtub – ensuring safety and preventing injuries or falls. (Note: Most falls happen when seniors get in or out of the bathtub.)
• SECURE CONSTRUCTION- Padded rubber clamp with strong locking mechanism allows rail to securely clamp on to the side of the tub. Heavy-duty, one-piece steel frame guarantees a firm, non-shaky grip. Durable construction supports individuals up to 300lbs.
• CUSTOMIZED FIT & TOOL-FREE ASSEMBLY– Width adjustable clamp allows tub rail to fit securely on any tub wall (3”-7” thick). Easy installation, no tools required. Tub rail will not leave unsightly marks or dents on the surface of the tub. Note: Not intended for use on fiberglass surfaces.
• LIGHT-WEIGHT & PORTABLE – Less than 6 lbs. Can be easily moved and installed in another bathroom. Ambidextrous design works for both right and left-handed users.
• MODERN COMPACT DESIGN- Smooth-white, powder-coated stainless steel frame blends perfectly with any bathroom decor.

User questions & answers

Question:	Will this product rust
Answer:	Mine appears to be well covered with what appears to be enamel paint on all exposed surfaces, so unless the surface is nicked somehow, and the paint damaged, then I doubt it could rust. Plus, unless you fill the bathtub with water and never empty it, so it leaves the base of the grab bar constantly submerged, (?) should not be an issue.
Question:	Is it polished stainless
Answer:	Is not polished stainless, it is a painted metal.
Question:	Is it secure enough for a 250 pound man to lift himself out of the tub if he slips and falls in
Answer:	Hi! My name is Jasmine and I am with Beyond Med Shop. The Vaunn Medical Bathtub Safety Rail provides support for individuals getting in and out of the bathtub. For your information, it can be used by individuals up to 300 pounds. I hope this helps. Please contact us at [email protected] if you need any other information.
Question:	How does it attach, e.g., suction
Answer:	It attaches like a vice grip. Clamps on both sides get tighter as you screw them closed. Basically they can fit many different sized sides of a tub. Much better and safer than suction which I have had in the past. Never again. I will purchase just one more to make it like two railings! Very good quality and weight. I give this product👍🏽👍🏽

Product description

Handles are adjustable and rotate back to allow a wide range of comfortable and secure positions. Closed cell foam armrests provide a comfortable, sure grip. Adjustable height 26-31(66-74cm) accommodates standard or elevated Toilet seats. Easy to clean aluminum frame mounts securely onto bowl with adjustable bracket 18-24(46-61cm). height adjustment armrest to floor: 26-31(66-74cm); width adjustment between armrests: 8-24(46-61cm); overall depth: arm 16.75(43Cm), at leg 12(30cm); weight capacity 300lbs(1136kg).

• Handles are adjustable and rotate back to allow a wide range of comfortable and secure positions
• Toilet rail with closed cell foam armrests provide a comfortable, secure grip | Great for elderly or adults post surgery
• Toilet safety frame adjusts in height from 26 to 31 inches to accommodate standard or elevated toilet seats | tool free assembly
• Easy to clean aluminum frame mounts securely onto bowl with adjustable bracket 18 to 24 inches
• Width adjustment between armrests: 8" - 24" | Overall depth: arm 16.75", at leg 12" | weight capacity: 300lbs
• Commode compatibility: fits all standard sized toilets.

User questions & answers

Question:	Do the backs of the arm rests have adjustable height, or just the legs in the front
Answer:	It is a corded vacuum.
Question:	Husband has use of only one leg and arm. Pushes up on arm rail to stand. Will this be good for him
Answer:	ours is fairly easy to use. turn better than a regular vac. we do have 3 siberian huskys so if they tell you these never clog because its the animal version. thats not quite true. good luck
Question:	Can I install 1 rail on one side only? The toilet paper roll would be in the way of a second rail
Answer:	Grooming tool, yes and yes a retractable hose and cord
Question:	Are they sturdy . . . Or wobbly when getting up
Answer:	I remember that being weird! You pull up and out on back of handle but down below the top of it? we sent ours back because we just weren’t happy with it.. which is sad because I loved my first one , thought it was the same, but they’ve changed it... so sorry , I hope this helps ...good luck

Product features

Medline Toilet Support Frame

Medline’s Toilet Support Frame provides users added stability while lowering onto and rising from the toilet. This non-invasive frame is ideal for anyone with limited mobility, stability issues, or recovering from surgery.

The frame is made of sturdy anodized aluminum tubing with skid-resistant rubber tipped legs and textured grip arm rests for comfort.

Supports up to 300 lbs. Not recommended for full weight bearing.

Step 1:

Remove existing toilet seat assembly, including bolts and nuts.

Place toilet safety frame bracket between toilet fixture and toilet seat / lid assembly with rounded part of bracket facing back of toilet.

Step 2:

Replace toilet seat / lid and reinsert the original mounting bolts through front holes of the bracket and toilet fixture.

Replace and tighten the original nuts.

Step 3:

Insert side rails of the safety frame into the mounted bracket. Depress built-in snap buttons and slide each side frame into desired width position.

Insert black adjustments hand knobs to secure into place.

Step 4:

Adjust foot pieces to desired height. Make sure both foot pieces are fully engaged and adjusted at equal heights.

Make sure mounting hardware is tightened and all snap buttons are fully secure before use.

Product description

Product description R8732P Size: 32", Finish: Peened Features: -Product Type:Grab bar -Weight Capacity:Over 400 Lbs -Adjustable:No. Specifications: -ADA Compliant:Yes. Dimensions: -Overall Height - Top to Bottom:3.5 -Overall Depth - Front to Back:3 -Overall Width - Side to Side:12 -Overall Width - Side to Side:18 -Overall Width - Side to Side:24 -Overall Width - Side to Side:30 -Overall Width - Side to Side:32 -Overall Width - Side to Side:36 -Overall Width - Side to Side:42 -Overall Width - Side to Side:48 Moen SecureMount peened 32-Inch grab bar has a peened finish. It is ADA compliant and comes with a limited lifetime warranty. A Genuine Moen Product. Moen is dedicated to designing and delivering beautiful products that last a lifetime. Moen offers a diverse selection of kitchen faucets, kitchen sinks, bathroom faucets and accessories, and showering products. Moen products combine style and functionality with durability for a lifetime of customer satisfaction.

From the Manufacturer

Moen SecureMount peened 32-Inch grab bar has a peened finish. It is ADA compliant and comes with a limited lifetime warranty. A Genuine Moen Product. Moen is dedicated to designing and delivering beautiful products that last a lifetime. Moen offers a diverse selection of kitchen faucets, kitchen sinks, bathroom faucets and accessories, and showering products. Moen products combine style and functionality with durability for a lifetime of customer satisfaction.

• PEENED: Features a textured slip-resistant finish
• SUPPORTIVE DESIGN: Bathroom grab bar supports up to 500 lbs when installed in a stud or when using SecureMounts (not included)
• SAFE AND SECURE: Optional SecureMount design for easy, secure installation (sold separately)
• PEACE-OF-MIND: Designed for hassle-free installation
• BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty
• SIZE: Overall length: 35.25; 32-Inch Bar Length; 1.25-Inch Diameter

User questions & answers

Question:	does this grab bar come with SecureMount Anchors
Answer:	They are not lined. I ended up ordering a second pair for each window so it covers more. It still lets in quite a bit of light but no one can see in at night when the lights are on. I have had them for over a year and still love them.
Question:	Can anyone tell me what size tile drill bit I would need to install this grab bar
Answer:	It’s whiter than a regular white.
Question:	What is peened
Answer:	Yes each panel is 54 inches each pkg has 2 panels.
Question:	Which is stronger? Install to studs or install using secure mount anchors
Answer:	Solid white

Product features

Moen 32" Concealed Screw Grab Bar

Feel secure and steady in the bathroom with the Moen 24-Inch Grab Bar. For the bath, shower, or toilet, this ADA grab bar supports up to 500 pounds. Its SecureMount design allows for easy, secure installation at any angle. And with durable stainless steel construction, this bath grip provides lasting performance and complements a wide range of bathroom decor.

Durable, Reliable and Stylish

Measuring 32 inches in length and 1.25 inches in diameter, this shower grab bar accommodates hands of all sizes and supports up to 500 pounds. Constructed from durable stainless steel, it features a corrosion-resistant finish to ensure lasting performance. Stylish end covers conceal the mounting hardware for a clean, seamless look.

Easy Installation with SecureMount Anchors

Featuring a convenient SecureMount design, the 24-inch grab bar is easy to install. The SecureMount anchors allow for secure installation at any angle and help ensure proper alignment.