13 best printer brands

Product description

The Dremel DigiLab 3D20 Idea Builder 3D Printer is Dremel's most reliable low-cost 3D printer for hobbyists, tinkerers and other users new to 3D printing. The simple design of the printer along with Dremel support team will help you succeed at 3D printing, even without prior experience! The printer comes fully assembled and includes a 0.5 kg spool of Dremel filament. The easy to follow quick-start guide and detailed instructions will help you begin printing right out of the box. Immediately, you will notice the attention to safety with the rigid, fully-enclosed design and 3rd party UL approval. The printer is designed to print with PLA filament onto a non-heated build plate that uses black build tape to help your prints adhere to the build plate. You can begin your printing with the high-quality models pre-loaded on the printer, which can be accessed through the 4” full-color touch screen. You can load your own files from sites such as Thingiverse, with the included Dremel 3D slicer software. An upcoming update will allow the 3D20 to use .gcode files so you can use Dremel Digilab 3D Slicer, Cura, Craftware, KISSlicer, Simplify3D, Slic3r, Repetier, and other programs to load your print files. Once you start slicing your own files you can take full advantage of the 9” x 5.9” x 5.5” build plate and 100 micron high resolution. The simple design of the extruder allows for easy maintenance with continued use of the printer. With 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey. By purchasing a Dremel 3D printer, you will have access to Dremel video tutorials as well as unrivaled Dremel customer service. All the help you need will be just a quick email, live chat or phone call away. This is Dremel's most affordable 3D printer and is perfect for new users or for students. Electrical Input Rating - 120 V, 60 Hz, 1.2 amp.

• Countless hours of high quality printing with the most reliable low-cost 3D printer
• Quickly and easily make your 1st print out of the box with completely pre-assembled printer, included 0.5 kilogram spool of filament and clear setup instructions. Maximum build depth (inches): 9
• Far superior safety compared to competition with fully enclosed design, non-heated build plate, PLA-only printing and 3rd party UL safety approval
• Compatibility with brand new Dremel Digilab 3D Slicer based on cura, the industry leading open source 3D printing software and gcode files so you can use your favorite slicer
• Accompanied by unparalleled local Dremel customer service support and industry’s best 1-year warranty. Extruder temperature: Up to 230°C /397°F

User questions & answers

Question:	Will this work with .obj files
Answer:	Yes. The Dremel 3D software is compatible with both .OBJ and .STL files.
Question:	Does it use a Proprietary filament or can it use any standard 1.75 PLA purchased from Amazon
Answer:	According to Dremel -> The Dremel 3D Idea Builder was designed and optimized for use Dremel PLA filament. Other filament may cause damage to the machine and will void the warranty.That being said because the filament by Dremel was not available at the time I did my review and I ran out of the original dremel filament I did buy replacement filament by 3D Solutech (1.75 PLA 2.2lbs spool) and will confirm it works. The spool does not "lock" into the printer, however it does fit in the spool grooves and still rotates and feeds into the print head with no issues. Just know that going non-dremel brand you may lose your warranty. You could if you wanted to wind filmant onto the dremel spool and get it to "sit/lock" correctly if you are concerned about it. For me it works perfect without locking it in and placing it in the spool groove at the bottom of the printer.
Question:	what can't the 3d printer make
Answer:	Puppies. Unless you are talking about small plastic puppies. Then it can do that. Real puppies though, not at all
Question:	Is it possible to print a copy of this Dremel 3d printer so I could then reurn the original printer to Amazon and just use the printed printer
Answer:	Yes, but dont stop there... you can create copies with the copies. After only a few generations you will have thousands of printers and can retire rich!

Product features

Best-in-Class Reliability

The Dremel 3D20 is the most reliable consumer-grade 3D printer on the market. Every Dremel 3D20 has been rigorously tested to ensure reliable printing time and time again. Furthermore, Dremel filaments are specifically engineered to optimize printing.

Get Started Immediately

It’s quick and easy to begin 3D printing. Our open system gives you the ability to download and print free models from around the web. You can also create your own designs by using any CAD software to bring your imagination to life.

Trusted By Makers

Makers have trusted Dremel since 1932 because of the quality and versatility of our products. We have been there for you over the years, and we will continue to be there with you in the future. Make More!

Full-Color LCD Touch Screen

Interact directly with the 3D20 through its full-color LCD touch screen. The interface allows you to modify settings, lookup files in the SD card, and print in a smooth fashion.

Fully Enclosed

The 3D20 is fully enclosed to maximize the printing success rate by creating a stable temperature inside. This also protects children from sticking their hands into the work area during prints.

PLA Filament

Dremel’s non-toxic, recyclable, plant-based PLA filament is safe to use at home and around children. It has been engineered for optimal printing, producing a stable, strong object with a high-quality finish.

Industry's 1-Year Warranty

If something goes wrong with your 3D20 3D printer, rest assured that we will have your 3D printer fixed in no time at no cost to you. Know more in our official website.

More Than Just A 3D Printer

In a world full of 3D printing startups, Dremel provides you with an entire ecosystem of benefits that goes beyond the 3D printer hardware. In addition to our reliable 3D printer, you will get our:

• 1. High-Precision Printing Quality: Equipped with dual Y axis motors and down-shift Z axis, moving more smoothly, fewer points of failure and fewer headaches.
• 2. Brand Power Supply: Built-in brand power supply, heat up the hot bed to 110℃ in 5 minutes.
• 3. Resume Printing Function: The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• 4. Semi-Assembled Kits: Ender 5 comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer.
• 5. What You Get: Ender 5 3D printer, lifetime technical assistance and 24 hours professional customer service.

Product description

Supercharge the office with affordable color and fast two-sided performance. Save paper with automatic two-sided printing, and handle more tasks without slowing down. Manage your budget with professional-quality color at up to 50% less cost per page than lasers with the HP OfficeJet 6978 wireless printer.



Easily print from a variety of smartphones and tablets. Connect a smartphone or tablet directly to the printer and easily print without a network. Print wirelessly, and share this all-in-one with other wireless-enabled devices. Set the pace for success with rapid print, scan, and copy speeds. Save paper and conserve resources—consume up to 50% less paper with automatic two-sided printing. Make scanning effortless and accurate. Never turn a page again when you need to scan two-sided documents.

• Main functions of this HP color inkjet photo printer: copy, scan, fax, wireless printing, two-sided duplex printing and scanning, color touchscreen, automatic document feeder, Instant Ink ready so you'll never run out of ink, and more
• Easily print when and where you need to from your smartphone, tablet, or notebook PC; get convenient mobile printing options and mobile setup; connect the way you want to with Ethernet and wireless networking
• Ink delivered to your home: get your first 2 months free when you enroll in HP Instant Ink (optional) during printer set up; plans starting at $0.99 per month after the trial period, shipping and recycling included
• Built for business; produce fast professional-quality color for 50% less than lasers, save paper, and handle more tasks without slowing down
• HP OfficeJet Pro 6978 is ideal for the home office or small workgroups that need professional-quality, affordable color with powerful productivity and fast functionality
• Includes all features of HP OfficeJet Pro 6960 plus scan to email and other network functions for easy task management; duplexing document feeder for two-sided copying and scanning to complete tasks quickly
• Paper sizes supported: A4, Letter, 5x7 in, 4x6 in, Legal, 4R, L, Panoramic/10x30 cm, 10x15 cm, 10x15 cm plus tab, 13x18 cm, 4x8.5 in, 13x18 cm
• One-year limited hardware warranty; 24-hour, 7 days a week Web support

Product features

Main features

Functions, wireless, mobile printing, duplex, borderless printing

Additional features

Handle more business tasks

Product description

Rugged, versatile, and packed with time-saving features, the DYMO RhinoPRO 5200 Industrial Label Maker meets key ANSI and TIA/EIA 606-A labeling standards - and labels up to 77% faster than the competition*. Just press a proprietary Rhino “Hot Key” to automatically size, space, and format text for perfect patch panel labels - then press another to print matching cable flags or face plate tabs, without retyping. It’s just as easy to print module and fixed-length labels, horizontal, and vertical wire wraps, terminal and 110 blocks, and much more. Print Code 39 and Code 128 barcodes. Access 100+ industry symbols, fractions, and punctuation marks with a few quick keystrokes. Add the optional quick-charging lithium-ion battery for uninterrupted productivity. This cost-saving bundle includes a durasble carrying case and 2 rolls of vinyl labels (3/4" & 3/8", Black on White). Compatible Label Width: 1/4", 3/8", 1/2", 3/4" *Based on independent testing of Rhino 5200 vs. Panduit PanTher LS8, Brady, BMP21, Brother PT1650 measured in number of key strokes when making patch panel labels and all associated wire and faceplate labels

• GREAT FOR ASSET MANAGEMENT: Print Code 39 and Code 128 bar codes on 3/4" (19mm) wide labels
• INDUSTRY COMPLIANT: Meet key ANSI and TIA/EIA-606-A industry labeling standards
• TIME-SAVING FEATURES: Exclusive, one-touch “Hot Keys” to automatically size, space, and format label text for electrical and patch panels, terminal and 110 blocks, wire and cable flags, horizontal and vertical wraps, and fixed-length applications
• USE WITH AUTHENTIC DYMO LABELS: Uses DYMO Industrial labels; includes 2 rolls of vinyl labels (3/4" & 3/8", Black on White)
• FAST LABELING: Labels up to 77% faster than the competition* *Based on independent testing of Rhino 5200 vs. Panduit PanTher LS8, Brady, BMP21, Brother PT1650 measured in number of key strokes when making patch panel labels and all associated wire and faceplate labels

User questions & answers

Question:	How do the labels hold up to automotive uses, like oils, fuels & under hood temperatures
Answer:	yes it will
Question:	Is the rechargeable battery pack included
Answer:	Yes and power restart
Question:	What are the best labels size and material for printing to cat5-6 cables and patch panels
Answer:	you need to download the slicer based on your preference and there is a 10m sample filament coming w/ this printer. if you have question, feel free to directly contact us: [email protected]
Question:	Is this the same as the 3M PL200 where the 3M model is just a rebranded Dymo
Answer:	Not really a hardware thing. Supports are more dependent on software and settings than hardware. That said, this printer does come stock with a layer fan which will help with printing arches and bridges, so long as your slicer settings are setup to utilize it.

Product description

Thermal paper rolls are made with top quality thermal paper and deliver crisp, clear images. Media Size: 3.125" (W) x 2.81"(D) x 230ft(L). Top quality paper deliver crisp, clear images. Each Paper Rolls has an end of warning signal. 5 years image life guaranteed, Lint Free Thermal Paper Rolls. Made specifically for Epson printers.

• BPA Free
• 3 1/8 inches x 230 feet - 2.75" Diameter
• End of Paper Roll Warning Stripe
• Core Size: 7/16" Inner Diameter & 7/8" Outer Diameter
• Premium Quality “MADE IN THE USA”

User questions & answers

Question:	It’s soft paper
Answer:	We use 3/8 Black on White Permanent Vinly Labels for Panels. Set text size to auto. Most patch panels spacings are around .65, so try starting there and playing with that to get your panel spacing adjusted to your particular brand of panel. For cables, we use the cable wrap feature, printed on 1" labels. That will kick out up to about 7 characters without shrinking too much.
Question:	Can it be printed on a computer
Answer:	Wow, I just googled the PL200 and it sure looks like the Dymo 5200, though the Dymo includes the battery charger and some spools of tape and a nice hard case to keep everything together. Looking at the price, I think the Dymo is a better buy.

Product description

Our USB 2.0 A Male to B Male Cable is the reliable choice for connecting devices with USB Type B Male ports such as printers, scanners, printer switch hubs, and other legacy devices that are economical to keep as a back-up.



Specifications:

Left connector type: USB 2.0 type A Male

Right connector type: USB 2.0 type B Male

Shell material: Nylon Braided

Plug: Gold Plated



Features:

1. Supports data transfer rate at up to 480Mbps.

2. Compatible with USB1.0, 1.1, 2.0.

3. With the perfect length, it is long enough for you to print document or pictures at home or in office.

4. Gold-plated connectors added corrosion resistance, you can look forward to years of superb signal transmission.

5. Premium nylon braided cable adds additional durability and tangle free.

6. Plug and play, no software or drivers required.

7. This Printer Cable compatible with all USB B Devices.



Notes:

--Verify your device has a Type-B Female port & not a standard USB, Micro-USB or Mini-USB port.

--This printer scanner cable is mainly used to transfer data and it cannot work as a power cable to power on the printer.



Warranty

--We are confidence by our products quality any problem please contact us immediately, we will 100% to solve it.

--Any manufacturing defects will free send new one or full refund.



Package Contents:

1*OUK-BT USB 2.0 Printer Cable

• USB Printer Scanner Cable: OUK-BT USB 2.0 printer cable is ideal for connecting your scanner, printer, server, hard drive,camera, piano and other usb b devices to a laptop, computer (Mac/PC) or other USB-enabled device for data transfer.
• High Speed Printing: Up to 480 Mbps transfers data speed for USB 2.0 devices, the USB Type B cable is backwards compliant with full-speed USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps). Compared with WIFI connection, this USB B Cable provides a more stable data transmission and offer a more efficient work way for you.
• Simple to Use: Plug the standard Type-A Male connector into your computer, and the Type-B connector into your other device, no driver required. Even if you are a novice, you can use it easily and proficiently.
• Premium Quality: Constructed with corrosion-resistant, gold-plated connectors for optimal signal clarity and shielding to minimize interference; Premium nylon braided cable adds additional durability and tangle free. This USB 2.0 Printer Cord is far more dependable than others in its price range.
• Compatibility: This Printer Cable compatible with all USB B Devices such as HP deskjet 2540 / 3630, HP officejet 5740, HP Envy 4527 / 5540, Canon MG5750 MG7550, Epson XP225 / XP425, Brother DCP-L2520DW, Lexmark MX310DN, Dell C2665DNF, Samsung Xpress SL-C1860FW, Oki ML1120, Schiit Modi 2 Uber, Yamaha digital piano, DAC etc. Warranty: Any manufacturing defects will free send new one or full refund.

Product description

Feature

High percision:the tolerance is about 0.02mm,details make a difference.

No bubbles:No drawing,no bubbles,smooth and delicate finished product.

Uniform wire diameter and bright colors.

No plugging continuous silk:good fluidity,smooth feeding,stable output.



Specification:

Brand ：YUANEANG

Material: PLA

Diameter: 1.75mm

Tolerance: 0.02mm

Net Weight: 1 Kg / spool

Gross Weight: 1.3 Kg / spool

Package Size: 206*68*206mm

Printing temperature: 200℃-210℃.

• 【Dimensional Accuracy & Consistency】Our YUANEANG 3D Printer PLA Filament to be strict tolerances. 1.75 mm in diameter, Minimum demission tolerance /- 0.02mm to ensure consistent feeding and smooth printing, 1 KG (approximately 2.20 lbs) Spool.
• 【Strong Compatibility】These 3D Printer PLA Filament Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Our filaments had been tested on various brands of 3D printer in the market, such as MK3, Ender 3, Monoprice FlashForge and etc.
• 【High Quality】YUANEANG PLA 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. 100% made of environment-friendly natural materials, harmless to users, and the environment, degradable and healthier.
• 【High Toughness and Stable Performance】Our 3D printer PLA filament are modified on the basis of traditional PLA materials, and the toughness of the material is increased by more than 5 times, which is more conducive to printing complex models.
• 【Clog-Free, Bubble-Free & Suppor】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag. recommended PLA filament extrusion/nozzle temperature 200℃-210℃, bed 60°C - 80°C. With a promising 6-month warranty, it will be your risk-free choice, please be assured that we’ll always stand behind our products.

• ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
• 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
• ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
• MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
• TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)

User questions & answers

Question:	will this fit an geeetech a
Answer:	It's all you need. Reuse the heat block and replace the nozzle go on YouTube lots of how to install and replace micro swiss on cr10 and cr10s.
Question:	Does this work for the Ender
Answer:	Torque setting should be a smidge past snug. Basic install should be done while cool (don't burn yourself) with the final tightening of the nozzle done at full temp. Get everything mostly tight without the nozzle bottoming out, then run it up to 250c, let it soak for a moment, then torque down between the heaterblock and nozzle. Let it cool a bit, then install the Bowden tube and feed filament into the machine . . . And you're good to go. Expect to run the nozzle 5 to 10c hotter than you have been, particularly if you use a steel nozzle.
Question:	Does this come pre-wired? At least at the opposite end of the extruder. I see just bare wires but a review says pre-wired. Confused
Answer:	As long as the heating cartridge fits you shouldn't have a problem. I'm not familiar with the MK10 heating block, but again as long as it fits it should be fine. If there's too much of a gap or risk of it falling out - potentially catching the print on fire - I'd buy another heater cartridge that's v6 compatible.
Question:	Does this work for the Ender 3 Pro V
Answer:	Yes

Product features

3D Printer Extruder Assembled Hotend for Creality Ender 3 /Ender 3 Pro /Ender 3X

Note: The Ender 3 Extruder Head Kit Comfortable for Creality Ender 3 / Ender 3 Pro / Ender 3X

These are original replacement parts for Creality 3D printer Ender 3 Pro /Ender 3 /Ender 3X.

Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) Ender 3 Extruder Hot End Kit,

white wire was temperature thermistor, Black wire was heating tube 24V 40W

- Installation type: External thread connection

- Application: Creality 3D printers Ender 3 /Ender 3 Pro /Ender 3X

- Nozzle size: 0.4mm - Cable length: 1.2m

- Heating Tube: 24V 40W

- Operating temperature range: -40~+260°C (-40~+500°F)

- Material: Aluminum+Stainless Steel+Brass

- Throat length: 52mm

- Aluminum block size: approx. 20 x 20 x 10mm

HIGH QUALITY TEFLON TUBE and BRASS NOZZLE

Teflon tube: PTEF, heat and moisture resistance,non adhesion, wear and corrosion resistance.

Thermistor and heating tube: High quality thermistor and heating tube are up to 260℃,with rapid-risen temperature, precise temperature control and good stability.

NOZZLES and Hoses: The optimized internal structure of seamless connection between nozzle and heatbreak accelerates the extruder to dissipate heat and the heatbreak to insulate heat, letting go of the nozzle blockage.

Full Metal 3D Extruder Kits Hotend 24V 40W for Creality Ender 3/ Ender 3 Pro /Ender 3X

INTEGRATED SHELL OF ALL METAL

FULL METAL JACKET: Sturdy and wearable

STABLE RUNNING: Non-blockage, non-leakage

HIGH PRECISION: Heating and cooling system with high quality

The frosting surface of aluminum shell anodized for sturdy and more wearable;integrated structure and simple circuit are convenient for disassembly, repair and assembly.

What you get

Package list:

1 x Aluminum Block

1 x Heating Tube

1 x M6x30mm Throat Pipe (Built-in Teflon)

1 x Thermistor +Brass Sleeve

1x 1.75mm 0.4mm Brass Nozzle

5x1.75mm 0.4mm Brass Nozzle

NOTE: Ender 3 extruder kits be used on the original creality Ender 3 /Ender 3 Pro /Ender 3X. If be used to the other 3D models, customers need to afford to the responsibility by themselves, meanwhile, our after-service will not valid for this cause.Thanks for your understanding.

Product description

Compatible with Bixolon SRP-350, SRP-350plus, SRP-352plus, SRP-370, SRP-372, STP-131 Citizen CBM1000, CBM230, CBM231, CBM293, IDP3210, IDP3310, LT380, RJV-2000, CT-S310, CT-S810, CT-S4000 (3 1/8"), CT-S300, CT-S2000 EPSON M129B, M129C, TM-H5000, TM-H5000 II, TM-H6000, T20, T20II, TM-T80, TM-T85, TM-T88, TM-T88II, TM-T88III, TM-T88IV, T90 Series, TMU 6000 Star Micronics SCP700, TSP100, TSP300 Series, TSP400 Series, TSP500 Series, TSP600 Series, TSP 700 Series, TSP2000 SeriesTSP-650, TSP700II, TSP 800

• FHS Retail Brand - 3 1/8 x 230' GUARANTEED LENGTH - 32 rolls
• Thermal paper rolls are made from the best quality paper.
• BPA FREE - Made in USA or CANADA
• 5 years image life guaranteed, Lint Free Thermal Paper Rolls
• Each Paper Rolls has an end of warning signal

User questions & answers

Question:	Does it work with Clover P100? (1.0 station
Answer:	Not sure what soft paper means? It feels like paper
Question:	Does this paper fit the epson tm-t20ii
Answer:	if the computer is connected to a printer that feeds this size of paper then yes
Question:	Does this fit star tsp
Answer:	I use these labels on the wiring on my Perkins 4.108 diesel and they work OK. Just pick the right ones. I use the ones for cables and the clothtype ones.
Question:	Does it work on Epson M253A
Answer:	It includes a battery but it doesn't fit this device. I bought one but will probably return it because there wasn't a manual & the batter was for something else.

• USB 3.0 A Extension: USB 3.0 Male to Male cable connects a USB peripheral with USB 3.0 type A port to a computer for speedy file transfer. It acts as an extension for your USB 3.0 connection. NOTE: Does not support connecting two computers directly
• 5GBPS Super Speed Transfer: Up to 5 Gbps SuperSpeed for USB 3.0 data transfer cable, 10x faster than USB 2.0. Backwards compatible with computer USB 2.0 and USB 1.1 ports - these cables also allow connection of USB 3.0 devices to legacy USB 2.0 computers.
• Plug & Play: No driver needed for the usb 3.0 a to a cable. Just plug-and-play for hard drive enclosures, printers, modems, cameras, and other SuperSpeed USB peripherals.
• Durable & Reliable: With molded strain relief connectors for durability and grip treads for easy plugging and unplugging; The combination of gold-plated connectors, bare copper conductors, and foil & braid shielding provides superior usb 3.0 cable performance, error-free data transmission
• Broad Compatibility: The usb 3.0 a cable is compatible with Western Digital (WD) My Cloud and My Cloud Mirror hard drives with Type A USB 3.0 port.

User questions & answers

Question:	Can I use this to connect my mini laptop to my power bank for charging ? The power
Answer:	It should
Question:	I have a monitor with usb ports - that I need to connect to laptop to work as a usb extender. Is this is the right cable
Answer:	Yes It fit the Epson TM-t20ii
Question:	Will it function to transfer cellular hotspot data to my laptop
Answer:	Yes it does. That is the same printer we are using.
Question:	can i use it to transfer data from one pc to another pc
Answer:	Yes

• 【Multicolored Rainbow】 ☆ Select Green - red - yellow - purple - pink - blue as the main color and the color changes every 15-18 meters. The first color is random, maybe blue, maybe not. Bright rainbow colors make your print more attractive and unique.
• 【Dimensional accuracy and controlled density】 A self-adaptive control system of the production system ensures that this 1.75mm PLA filament has a dimensional accuracy on the diameter of +/- 0.02mm, for each 1kg reel.
• 【100% ecological PLA filament】 The filament of the SUNLU 3D printer complies with the RoHS (Restriction of Hazardous Substance) directive and does not contain potentially hazardous substances. The 1.75mm PLA filament has a pleasant smell and is considered by many to be an improvement over the PLA.
• 【Prestazioni High performance】 Neatly wrapped, dissolve well, feed uniformly and constantly without clogging the nozzle or extruder. SUNLU PLA filament is the choice of engineers, designers and anyone else in 3D printing that demands the best.
• 【Excellent quality-price ratio and wide compatibility of use】 with over 8 years of experience in Research and Development and tons of filament produced every month, SUNLU is capable of producing every kind of filament in large scale with a premium quality, this contributes to make the SUNLU filaments very affordable and with an excellent quality-price ratio. It is also compatible with the most popular 3D printers, such as Prusa MK3, Ender 3, Monoprice, Flashforge and many others.

User questions & answers

Question:	What temperature should i print sunlu pla filament at
Answer:	No idea.... I never seen any power bank charged through this kind of usb port. Either way is a good extension cord for sure :)
Question:	What temperature should i print sunlu 3d pla filament at
Answer:	Sure, if they are close to each other. It's a short cable.
Question:	How should print settings be adjusted for sunlu pla+ filament compared to regular sunlu pla 1.75mm
Answer:	If you have USB 3.0 type A connectors on both devices (probably not on your cell).
Question:	Is this pla plus 3d printer filament sunlu brand? what's the warranty teams
Answer:	Usb ports are ins not outs you can get an external hard drive docking hub and it connects into your computer usb and then you can take the hard drive out of the old computer you will need a pin cover to make it a slave hard drive there also maybe a program wizzard that might do it usb to usb check with computer store

Product features

Try SUNLU Multi-Color 3D Printing rainbow PLA Filament which gives your printing object a very smooth gradient effect between colors!

Rainbow PLA 3D filament Specifications:

1.75mm PLA Material: rainbow Polylactic Acid(PLA)

Weight & Length: 1KG(2.2 lbs) & 330M/KG 3D Printer Filament

Rainbow PLA Diameter& Tolerance : 1.75MM &± 0.02MM

Base Plate Temperature : No Heat Required / 50-70°C (options)

3D Printing temperature: 190~230℃

3D Print Speed : 50-100mm/s

Product description

"The Brother MFC-J5845DW Investment Tank color inkjet all-in-one printer with tank technology delivers reliable performance, enhanced productivity and professional results - perfect for small businesses and home offices. The MFCJ5845DW features high-capacity Investment Tank cartridges along with an internal ink storage tank to deliver uninterrupted printing for up to 1-year without the need to purchase ink. With Investment Tank, there's no sweating over your printer running out of ink - just the features, convenience and affordability you need. Brother Investment Tank color inkjet all-in-one printers use familiar, easy-to-use cartridges that hold more ink to help minimize cartridge replacement. Investment Tank all-in-ones also use the Brother intelligent Page Gauge, a visual way to know the amount of ink used and the amount of ink remaining to help eliminate running out of ink in the middle of an important print job. Remaining page counts are displayed so you can print with confidence and without interruption. Brother MFC-J5845DW features include mobile device printing, flexible paper handling, 11 x 17 printing, automatic two-sided printing and easy onscreen navigation using the 3. 7 color touchscreen. Connect with versatile connection options including built-in wireless, Ethernet and Wi-Fi Direct or connect locally to a single computer via USB interface. Includes a 2-year limited with free online, call, or live chat support for the life of your printer. Based on average monthly print volumes of approximately 300 pages at 60% black pages / 40% color pages in accordance with ISO/IEC 24711 using 4 cartridges provided in-box. Requires connection to a wireless network. Page Gauge is an estimate for informational purposes only. For actual cartridge yield information refer to manufacturer's website. Approximate page yields in accordance with ISO/IEC 24711. Based on average monthly print volumes of approximately 150 pages at 60% black pages / 40% color pages in accordance with ISO/IEC 24711 using 4 cartridges provided in-box. Based on average monthly print volumes of approximately 300 pages at 60% black pages / 40% color pages in accordance with ISO/IEC 24711 using 8 cartridges provided in-box. Based on ISO/IEC 24734 (after first set of ISO test pages). The mobile device must have NFC capability and run Android OS 4. 4 or later. "

• UP TO ONE YEAR OF INK IN BOX: The Brother MFCJ5845DW Investment Tank color inkjet all in one printer provides up to one year of ink
• REVOLUTIONARY INKVESTMENT TANK INK SYSTEM: Brother re engineered its ink cartridges to hold more ink and created an internal ink storage tank
• PRINT WITH CONFIDENCE USING PAGE GAUGE: Help take the guesswork out of when to replace ink by using the intelligent Brother Page Gauge
• VERSATILE PAPER HANDLING: The MFCJ5845DW has a 250 sheet capacity paper tray for up to 11 inches x 17 inches ledger size
• DASH REPLENISHMENT ENABLED: Upon activation, Dash Replenishment measures the ink level and orders more from when it’s low
• FOR USE WITH BROTHER GENUINE INKS: LC30373PKS, LC3037BK, LC3037C, LC3037M, LC3037Y, LC3039BK, LC3039C, LC3039M, LC3039Y.
• Fax Modem Speed: 33.6K bps

User questions & answers

Question:	Will this print on cardstock, sticker paper, glossy photo style paper, and heat transfer paper? I use for crafts and need multi thickness options
Answer:	My experience is only business. It works well for letters, Cad Drawings up to 11X17.. I have used it with heavy paper, but not card stock. The color graphics is OK, but may not be so great for photos.
Question:	I have comcast phone service will the fax work by plugging it into a modem
Answer:	Page 309 of the instructions covers the procedure for VoIP usage. If you plug in to the modem and get a dial tone, all is good. If not, call your provider for further instructions. I don't use landline, so I don't fax.
Question:	does this printer have it's own email address...in other words, can i email a document directly to this printer, for printing
Answer:	no but it has it's own IP address
Question:	Will it work with an iMac
Answer:	It works with my iMac, iPad and iPhone. I use the older OS X 10.10.5 and not the recommended OS 10.11.6 or higher and my iMac provide me the right diver right away when I connected the printer to my wireless network and everything works fine. But I cant tell you if the software - which you can download at https://www.brother-usa.com/products/MFCJ5845DW#specifications works on older OS X older than the recommended OS 10.11.6.

Product features

Brother MFC-J5845DW INKvestment Tank Color Inkjet All-in-One Printer with Up to 1-Year of Ink In-box(1)

The Brother MFC-J5845DW INKvestment Tank color inkjet all-in-one printer with tank technology delivers reliable performance, enhanced productivity and professional results - perfect for small businesses and home offices. High-capacity INKvestment Tank cartridges along with an internal ink storage tank and an intelligent Page Gauge help to deliver convenient, uninterrupted printing for up to 1-year without the need to purchase ink. Business-capable features help increase productivity with 11”x17” ledger printing, up to 50-sheet automatic document feeder and cloud printing & scanning directly from the touchscreen. With INKvestment Tank all-in-one printers, you get the great features, convenience and affordability you need without the worry about your printer running out of ink.

Get Up to 1-Year of Ink In-box

- No need to replace ink for up to 1-year

- Enjoy truly uninterrupted printing - with cartridges included in-box

- Experience super-convenient printing

Revolutionary INKvestment Tank System

- Minimize the frequency of cartridge replacement with INKvestment Tank cartridges

- INKvestment Tank cartridges are engineered to hold more ink

- Familiar front-loading cartridges are clean and easy-to-use

- Internal ink storage tank delivers more pages

Page Gauge Lets You Print with Confidence

- Ink usage is monitored and estimated pages remaining are displayed

- Page Gauge takes the guesswork out of when to replace ink

- Help eliminate running out of ink during an important print job

• Genuine Rollo labels
• Ideal for shipping and logistics printing
• 500 Labels Per Pack
• Made in USA
• BPA-Free

User questions & answers

Question:	how do i fix the printing orientation
Answer:	Depending on what printer you are using as well as what type of hot end in that printer. This is strictly a trial and error setting. The temp range (200 to 230) is your starting point. I run mine at 205. There again you may find that suitable or you may want to run slightly hotter. My suggestion is make something small to test. Print it at 200. then print it again at 205 etc. Find the best results then lock that temp in your slicer program for future prints.
Question:	Can you use these with ink jet or laser printers
Answer:	It depends on your printer since the location of the thermocouple in the hot-end will give slightly different readings on different machines. On my MakerGear M2, I print all PLA filaments, including this one, at 215c with excellent results.
Question:	Fanfold vs roll? Any advantages or disadvantages to one over the other
Answer:	I had many issues with printing with this filament on my Ender-5. My heat towers were great up and down and so I initially selected a temp of 210C down to 200C and a bed temp of 45. I had ok adhesion but many prints would slip on the bed after a few hours printing or larger prints would lift from the bed. I eventually came across some users reporting that 228C hotend and 80C bed was working and so I gave it a try. Now I have this filament printing great and very few issues. Because of the increased bed temp it is important to reduce any drafts near the printer as rapid cooling can cause the print to warp and lift. I have experienced this once in the last 15-20 prints since I upped the bed temp compared to most other prints larger than 2x2 inches at 45C.
Question:	What size are these
Answer:	Yes,it's SUNLU Offical Brand,all 3D Printer filament offer 1 years warranty.They have PLA+,PLA,ABS,TPU,PETG,WOOD,Carbon Fiber,Rainbow filament.