14 best powder actuated fasteners for concrete
Powder-actuated fasteners for concrete are specialized tools and fasteners used in construction and other industries to securely attach materials to concrete or other masonry surfaces. These fasteners are designed to provide a reliable and efficient method for fastening objects to concrete without the need for traditional drilling and anchoring methods. Here are some key points about powder-actuated fasteners:
Operating Principle: Powder-actuated fasteners operate on the principle of using controlled explosive charges to drive the fastener into concrete or masonry surfaces. These tools combine a firearm-like mechanism with a nail or pin to achieve this.
Components: A typical powder-actuated fastening system consists of the fastener itself (usually a steel pin or nail), a cartridge containing gunpowder, and a powder-actuated tool (also called a powder-actuated nail gun). The tool contains a barrel where the cartridge is placed, and it is triggered to drive the fastener into the concrete.
Applications: Powder-actuated fasteners are used in a wide range of applications, including attaching wood or metal framing to concrete, securing electrical conduit and fixtures, affixing steel plates for structural purposes, and attaching various types of insulation to concrete surfaces.
Safety Precautions: Safety is of paramount importance when using powder-actuated fasteners. Users must be properly trained and wear appropriate personal protective equipment, including safety glasses and hearing protection. Additionally, the tools should be used in accordance with manufacturer instructions to minimize the risk of accidents.
Regulations and Codes: Depending on your location and the specific application, there may be regulations and building codes that govern the use of powder-actuated fasteners.It's essential to adhere to these regulations to ensure the safety and structural integrity of the project.
Variety of Fasteners: Powder-actuated fasteners come in various lengths and styles to accommodate different concrete thicknesses and load requirements. It's crucial to select the right fastener for the specific application to ensure a secure attachment.
Fastening Process: To use a powder-actuated fastener, the operator loads the tool with the appropriate cartridge and fastener. The tool is then placed on the desired spot on the concrete surface, and upon triggering, the explosive charge propels the fastener into the concrete, creating a secure attachment.
Advantages: Powder-actuated fasteners offer several advantages, including speed of installation, minimal damage to the concrete surface compared to traditional drilling methods, and the ability to work in tight spaces.
Limitations: While these fasteners are versatile, they may not be suitable for all concrete types or conditions. Factors such as concrete hardness, thickness, and the presence of reinforcing steel can affect their performance.
In summary, powder-actuated fasteners are a valuable tool in the construction and industrial sectors for securely attaching materials to concrete surfaces. However, their proper use and adherence to safety guidelines are essential to ensure successful and safe fastening operations.
Below you can find our editor's choice of the best powder actuated fasteners for concrete on the market
ITW Ramset 00022 HammerShot Low Velocity Powder Actuated Tool Replaces HD22
National Brand Alternative
Product description
The Ramset Hammer Shot 0.22 Caliber Single Shot Tool is a hammer-actuated tool utilizing 0.22 caliber loads. This tool is great for small DIY projects. The HammerShot can easily fasten up to 2-1/2 in. drive pins.
- Light weight duty tool designed for applications such as small room additions and basement remodels
- The model HD22 is a low velocity piston type fastening tool
- Designed for use with Ramset 0.22 caliber CW powder loads and Ramset fasteners
- HD22 single shot .22 caliber powder actuated fastener tool
- Delivers a powerful single shot to fasten your projects
User questions & answers
| Question: | How loud is this? Are different loads quieter? If I use this outside will it cause a lot of concern of gunshots |
| Answer: | This is mostly intended to attach wood to concrete and have the nail sit flush. But It could if you get creative. For example you could fire it into a small 1x2 block. It should set the nail flush with the wood, then you can knock the block out by splitting with a chisel and hammer. Or you could try firing long nails with undersized loads, like a 3 1/2" nail with a brown level 2 load will probably leave some nail head protruding. But for your purpose you may be better off with a concrete drill and screw. |
| Question: | Can this tool be used to attach furring strips to a brick fireplace |
| Answer: | It could, but as the previous responder pointed out, it may blow out your blocks if they are hollow. A better bet would be to drill holes and use masonry screws or anchor bolts. A hammer drill goes a long way to helping drill the holes, but it can be managed with a regular drill and masonry bit. If you're adding a 2x4 to the cinder block to build a wall, I would use 3 half inch redhead anchor bolts, liberally apply construction adhesive to the back side of the 2x4, and not worry about it ever again. Also consider you probably want to use a pressure treated board when attaching to concrete. |
| Question: | Will this allow the nail to protrude from the wall for hanging purposes |
| Answer: | It is translucent. Hope this helps. It will go on all types of skin. I use it and I have a darker skin tone and it goes on perfectly. Don't need to use to much. It helps makeup stay even during a workout! |
| Question: | Can it be used to fasten 1x4s to cinder blocks |
| Answer: | I never had any problems with the product or questioned if it was authentic. It was a lot cheaper than buying it Ulta Beauty. Good product. |
22 Caliber Red Single Shot Powder Loads, Power Fasteners Power Loads (100-Count)
Product description
This listing features one box pack of 100 red single shot loads, it will be a great helpful tool to arm your Ramset 721, M70, MasterShot, TriggerShot or HammerShot: Power load of 100 Count. These loads provides enought power to penetrate concrete and hallow block.
Use with Ramset 721, M70, MasterShot, TriggerShot, HammerShot tools, Powers P1000, HILTI DXE37 and DXE72, SIMPSON PT22, PT22H
Help to provide the power to penetrate hollow block and concrete or for Dog Training Dummy Launcher/Retriev-R-Trainer, DT System(High Range 200 Feet) (100-Count)
Color: Red loads
Includes 100 loads per order
Compatible with most other PAT brands
Dimension: 5.6 * 16 mm
Caution: Please test-fasten with the lowest power level for your tool. If more power is required, try the next higher power level until proper level and fastening is achieved. Please check the operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in some serious hurt.so please be more careful for it.
Advantages Powder Guide:Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level goes up too.
- Use with Ramset 721, M70, MasterShot, TriggerShot, HammerShot tools, Powers P1000, HILTI DXE37 and DXE72, SIMPSON PT22, PT22H
- Help to provide the power to penetrate hollow block and concrete
- Color: Red booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
- High quality powder loads, Includes 100 power loads per box
- Compatible with most other PAT brands; Complete burn keeps the tool clean
User questions & answers
| Question: | Do these work with 7" thick plastic components? Do they create any type fo heat flash that could warp a part |
| Answer: | not sure about that have to try it |
| Question: | Are these level 5 power cartridges or level 2? 5 should be red and 2 brown (or so I thought |
| Answer: | They are level 5 Red is level 5 and brown is level 2 |
| Question: | Will this work in my ruger .22 pistol |
| Answer: | Not sure it will work in a pistol or would be safe, but this is not a bullet this cartridge has no projectile, it’s basically a blank. These cartridges have more powder than a bullet. |
22 Caliber Yellow Single Shot Powder Loads, Power Fasteners Power Loads (100-Count)
Product description
This listing features one box pack of 100 yellow single shot loads, it will be a great helpful tool to arm your Ramset 721, M70, MasterShot, TriggerShot or HammerShot: Power load of 100 Count. These loads provides enought power to penetrate concrete and hallow block.
Use with Ramset 721, M70, MasterShot, TriggerShot, HammerShot tools, Powers P1000, HILTI DXE37 and DXE72, SIMPSON PT22, PT22H
Help to provide the power to penetrate hollow block and concrete
Color: Yellow loads
Includes 100 loads per order
Compatible with most other PAT brands
Dimension: 5.6 * 16 mm
Caution: Please test-fasten with the lowest power level for your tool. If more power is required, try the next higher power level until proper level and fastening is achieved. Please check the operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in some serious hurt.so please be more careful for it.
Advantages Powder Guide:Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level goes up too.
- Use with Ramset 721, M70, MasterShot, TriggerShot, HammerShot tools, Powers P1000, HILTI DXE37 and DXE72, SIMPSON PT22, PT22H
- High performance in penetrate hollow block and concrete; and also can be used for dog training dummy launcher/ retriev-R-Trainer
- Color: Yellow booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
- High quality powder loads, Includes 100 power loads per box
- Compatible with most other PAT brands; Complete burn keeps the tool clean
User questions & answers
| Question: | Do these work in remington powder actuated tools ( guns)? calls for 22 caliber, neck down and crimped |
| Answer: | If it’s a 22 caliber tool,then any 22 load will work, the only one that won’t work are the larger Hilti but those are .23 and they won’t even fit the tool. Be sure the job you are doing requieres the yellow,you might destroy some stuff if you use the most powerful yellow and red loads. |
| Question: | can these be used in a 22 pistol just looking for sound when training my pup |
| Answer: | That’s what I bought them for. They work but it’s black powder so if you don’t clean very well after it will rust up. |
22 Caliber Purple Single Shot Powder Loads, High Velocity Strong Straight Power Fasteners Power Loads (100-Count) (Level 6)
Product description
This listing features one box pack of 100 purple single shot loads, it will be a great helpful tool to arm your Ramset 721, M70, MasterShot, TriggerShot or HammerShot: Power load of 100 Count. These loads provides enought power to penetrate straight wall, concrete and hallow block.
Use with Ramset 721, M70, MasterShot, TriggerShot, HammerShot tools, Powers P1000, HILTI DXE37 and DXE72, SIMPSON PT22, PT22H
Help to provide the power to penetrate hollow block and concrete
Color: Purple loads
Includes 100 loads per order
Compatible with most other PAT brands
Dimension: 5.6 * 15 mm
Caution: Please test-fasten with the lowest power level for your tool. If more power is required, try the next higher power level until proper level and fastening is achieved. Please check the operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in some serious hurt.so please be more careful for it.
Advantages Powder Guide:Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level goes up too.
- Use with Ramset 721, M70, MasterShot, TriggerShot, HammerShot tools, Powers P1000, P2201, HILTI DXE37 and DXE72, SIMPSON PT22, PT22H
- High velocity, high powerful and high performance in penetrate straight to the wall, hollow block and concrete
- Color: Purple booster loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
- High quality 0.22 caliber powder loads, Includes 100-loads per box
- Compatible with most other PAT brands; Complete burn keeps the tool clean
User questions & answers
| Question: | Can these purple (high power level 6) be safely used as blanks in a 22lr revolver without damage |
| Answer: | It is loud. The loads look and sound like pistol shot. It could absolutely be mistaken for gunfire. If there's any adverse consequences to this kind of noise you should look into a hammer drill and concrete bolts. (also noisy, but not mistaken for firearms) |
| Question: | The tools indicated in the product description use necked-down powder loads. Will a straight sided load even fit into the chamber of these tools |
| Answer: | Yes, it has plenty of power to drive nails through the furring strips into brick or mortar. The only concern would be whether it would blow out the brick when the nail goes in. For brick I would recommend drilling holes for screws or bolts, use red heads, or tapcon fasteners. |
BluePoint Fasteners .27 Cal Strip Load Red (Enhanced) for Powder Actuated Fastening System
Product description
.27 Caliber strip load for Powder Actuated Fastening System. For use with BP301C, BP 303A, BP-361, BP-361M model Semi Automatic fastening Gun. Compatible with most concrete or metal fastening tools. Easy application with no drilling.
- New Enhanced Strip Design ensures it wont melt under heavy use.
- Brass Load ensures a better quality shot than most of our competitors
- For use in powder actuated Fastener tool
- Direct from Manufacturer. Due to circumstances surrounding the COVID-19 pandemic, there may be unexpected delays during shipping of product.
27 Caliber Red Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)
Product description
This listing features one box pack of 100 red strip shot loads, it will be a great helpful tool to arm your Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10: Power load of 100 Count. These loads provides enought power to penetrate concrete and hallow block.
Use with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10
Help to provide the power to penetrate hollow block and concrete
Color: Red loads
Includes 100 loads per order
Compatible with Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10
Dimension: 6.8 * 11 mm
Caution: Please test-fasten with the lowest power level for your tool. If more power is required, try the next higher power level until proper level and fastening is achieved. Please check the operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in some serious hurt.so please be more careful for it.
Advantages Powder Guide:Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level goes up too.
- Use with Ramset SA270, Cobra + and Viper tools, POWERS P3500, PA3500, P3600, Rocket, XT540, Hilti DX350, DX36M, DX451, DX460, 2HNW6, 2HNW7 and all other 27 caliber clone tool; 10 red strips: each strip contains 10 pieces powder loads.
- Help to provide the power to penetrate hollow block and concrete
- Color: Red strips loads; Power level is designated by the load level number marked on each box and also by the color of the box and the powder load. As the number increases, the power level increases
- High quality powder loads, Includes 100 power loads per box
- Compatible with most other PAT brands; Complete burn keeps the tool clean
ITW BRANDS 40088 .22 Caliber Fastener Tool
ITW BRANDS
Product description
ITW BRANDS 40088 .22 Caliber Fastener Tool
- N/A
- Imported
- Powerful, low velocity, single shot actuated tool for fastening to concrete, masonry, or steel
- Silencing handle eliminates unnecessary job-site noise
- Innovative and ergonomic ejection slide
User questions & answers
| Question: | Can I use dewalt brand nails and .22 loads |
| Answer: | You don't specify the size of the nail that you plan to use. But I wouldn't recommend it for cinder block. On cement block, it will work if you are able to avoid the hollow portion of the block. Otherwise, it could blow out the back portion of the block. Remember to follow the ratings on the charge. |
| Question: | Whats the weight capacity for hanging something |
| Answer: | Hello, the pistol only uses one shot at a time, you need to recharge every time you shoot (nail) |
| Question: | Will this tool work with concrete/cinder block? Some say no. If not, what alternative works with similar ease/mechanism of use |
| Answer: | Probably not a good idea. I know ammo is very hard to get but these are not the answer. |
| Question: | Can you hand 1 hole straps with this and/or drive rings |
| Answer: | I don’t think so. |
ITW Brands 40066 .22 Caliber Trigger Shot Tool
ITW Brands
Product description
ITW Brands 40066 . 22 Caliber Trigger Shot Tool
- Use for fastening to concrete
- Use for fastening to masonry
- Use for fastening to steel
User questions & answers
| Question: | Can this be used to install handrails on outdoor concrete stairs |
| Answer: | Brown is #2 (Mortar Joint), Green is #3 (Concrete Block) and Yellow is #4 (Solid Concrete). |
| Question: | Can you install washered pins with this tool |
| Answer: | It should work in brick but may crack it. |
| Question: | Is there a chart to tell the difference between color shots |
| Answer: | I don't see why not, I bought the ones bundled with the gun, but I think the Dewalt brand nail & loads should also work |
| Question: | will this work on a brick |
| Answer: | I did side wall panels against the wall and it did my job excellent |
Ramset Powder Fastening Systems 1516SDC 2-1/2-Inch Washered Pins, 100 Pack
Ramset Powder Fastening Systems
Product description
Ramset Powder Fastening Systems 1516SDC 2-1/2-inch washered pin are drive pins with washers to increase bearing surface against the material to be fastened. Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. The metal Washer is 16 gauge. It comes 100 per box. Shank diameter = .145 head diameter = .300.
From the Manufacturer
Ramset Powder Fastening Systems 1516SDC 2-1/2-inch Washered Pin are drive pins with washers to increase bearing surface against the material to be fastened. Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. The metal washer is 16 gauge. It comes 100 per box. Shank diameter = .145 Head diameter = .300
- Increases bearing surface against the material to be fastened.
- 16 gauge metal Washer
- Shank diameter = .145 head diameter = .300
- Comes 100 per box
- Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel
User questions & answers
| Question: | Does this brand work with a hilti gun |
| Answer: | I am not familiar with that brand. However, you can take the unit to your local hardware store and they can give you that answer. |
| Question: | When installed in a 2x4 to concrete, will the nail be flush |
| Answer: | It will be sunk in slightly but some may not. The nails have a plastic washer that keeps them pretty flush. |
| Question: | Are these acceptable to use in treated lumber |
| Answer: | If you would use the high power shells it should work. |
| Question: | does it matter if I use a Ramset .22 cab. or a .27 cab |
| Answer: | No, it works in both guns |
Ramset Powder Fastening Systems 2-1/2-Inch Pin w/Ramguard (100 per box)
Ramset Powder Fastening Systems
Product description
Ramset Powder Fastening Systems 2-1/2-Inch Pin w/ Ramguard (100 per box)
From the Manufacturer
Ramset Powder Fastening Systems 1516E 2-1/2-Inch Pin w/ Ramguard is designed for use in treated lumber applications. Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. It comes 100 per box. Shank diameter = .145 Head diameter = .300
- Designed for use in treated lumber applications
- Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel
- Shank diameter = .145 Head diameter = .300
- Comes 100 per box
- Powder actuated fasteners
User questions & answers
| Question: | Going to put up a stud wall, bottom plate on concrete. What lemght of nail should I use? Is the 2-1/2 enough |
| Answer: | Yes. That’s what I used along with construction adhesive. Make sure you use nails rated for pressure treated wood. Most codes require pressure treated against concrete and it’s just a good idea to use it. |
| Question: | Can this fastener be used in the Duo-Fast brand tool |
| Answer: | Yes it will work. |
| Question: | Is 2 1/2 inch long sufficient enough to drive 2x4 into concrete instead of using 3inch nail |
| Answer: | According to Ramset's website, 2 1/2 inch is what you use for attaching 2x4's to concrete. |
| Question: | are these non corrosive |
| Answer: | PLEASE READ: These nails WILL corrode in treated lumber, as they do not have the Ramguard coating. The seller advertises them as the non-corrosive version, when they are the plain version (1516). You are instead looking for model # 1516E (or 1516SDE, which have washers). The Ramguard coated nails have more of a painted tan color to them. |
Remington 476 Powder Actuated Fastening Tool
Product description
Brand New BULK item - no retail packaging, no instructions included. Powder actuated fastening hammer designed for the do-it-yourselfer. The strike of a hammer will actuate and fire a pin into concrete, steel or masonry. Ideal for mounting framing lumber, electrical junction boxes, conduit clips, & more. Uses .22 caliber low velocity power loads to fasten up to 2-1/2" power fasteners
- Brand New BULK item - no retail packaging, no instructions included
- Uses .22 caliber low velocity power loads to fasten up to 2-1/2" power fasteners
- The strike of a hammer will actuate and fire a pin into concrete, steel or masonry.
- Ideal for mounting framing lumber, electrical junction boxes, conduit clips, & more
User questions & answers
| Question: | I have remington model 479. i am looking for loads for this model. what are the best loads |
| Answer: | mine only fired two times and has never fired again. there is no way to take it apart and fix it. |
| Question: | where the load is placed to fire, is that portion (the barrel)should it be open & clear. to strike the nail |
| Answer: | Yes. It all depends on the type of blanks you use. There are different colors depending of the power. |
| Question: | will this item work good on holding down carpet tackstrip to concrete |
| Answer: | This is not a precision tool. You should use concrete anchors instead. I'd be concerned about breaking the edge of the stair off, or of it recoiling hard if you're trying to punch it through metal. It's really only meant to drive nails through treated wood. |
| Question: | Can it be used to attach a 2x4 to concrete for framing? It would need to penetrate the 1 3\4 of the 2x4 and then into concrete |
| Answer: | Yes, you have different length of washered pins that this tool will shoot attaching wood to metal or concrete by varying the . 22 load used. |
AIR LOCKER CN64A3 5/8 Inch to 2-1/2 Inch Heavy Duty Concrete T Nailer
Air Locker
Product description
This T-Nailer is excellent for wood to concrete/steel applications. A lightweight die-cast housing maximizes productivity by reducing operator fatigue. The CN64A3 also features an adjustable exhaust, quick release nose for easy jam clearing, and safety to prevent accidental firing. Applications include furring strips, plywood to concrete nailing, wire lath installation, steel banding, decking, fencing, sub flooring, and more. Shoots 14 gauge T-nails from 5/8'' to 2-1/2'' long Hardened driver Convenient side-load magazine Rubber hand grip for added comfort Heavy-duty light weight aluminum body Easy jam clearing design Adjustable exhaust Soft grip handle reduces fatigue Touch-strike security system is safe for the operator Available with either sequential and contact fire trigger Quick-release nosepiece for fast clearing of jams Rubber can protect the surface of the gun when the gun fall Applications: Wood to concrete and masonry furring Plywood to concrete nailing Light gauge steel drywall track to concrete Wire lath to masonry Steel banding to wood Wood to light gauge steel (up to 3/16/") Decking Fencing Sub flooring General construction
- Magazine Capacity: 100
- Fastener Size: 14 Gauges - 0.087" Diameter
- Operating Pressure: 60-100 PSI
- Fastener Length: 5/8" - 2-1/2" Long Nails
- Air Inlet: 1/4"
User questions & answers
| Question: | Will this air locker work on a Toyota 4runner? Cause Amazon is saying it will |
| Answer: | It is a term to say that this is an air powered fastener driver designed for cement, cinder block and such. I had poor results as it would not drive the T nail into old solid concrete. It may work for new, green concrete, or block. The only thing that I have found to work for attaching to concrete is to drill and use the appropriate anchor. |
| Question: | Is this more quiet than the ramset |
| Answer: | I have not used 2 1/2 nails with my gun but the 1 1/2 nails went through 3/4 plywood into block wall with no problem. No sure what you are doing but I would not trust it to hold ledger board on and then add a deck to the house |
| Question: | What's air locked mean |
| Answer: | I use yellow for most of what I do, 2 1/2" nails. Heavier loads for old concrete or longer nails |
| Question: | Will this gun a 2 1/2 inch nail through a treated 1 1/2 deck house band into a mortar joint |
| Answer: | Yes |
Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case
Product description
The Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case is the safer, pneumatic alternative to powder actuated concrete tools for basement renovations, garage updates, or new construction framing. Simply connect the concrete nailer to your air compressor, load a concrete drive pin into the nose of the gun, and pull the trigger to drive pins up to 10 times faster than with conventional powder tools. This air powered nail gun shoots single pins without needing to pre-drill holes, and is compatible with concrete pins from 3/4" to 3". Firing into green concrete (concrete that was poured less than 25 days ago, in most climates) is ideal when firing longer pins and will provide the best results for plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, subflooring and more. The body of the nailer is constructed of lightweight and rugged magnesium to reduce operator fatigue and features 360 degree adjustable exhaust, an air filter / anti-dust cap, ergonomic handle, and a blow molded case for easy transport and storage. The Pneumatic 3" Single Pin Concrete Nailer with Case is covered by Freeman's 7 Year Limited Warranty and 90 Day Wearable Parts Warranty.
- Nailed It: This single pin concrete nailer is a safer, pneumatic alternative to powder actuated concrete tools for basement renovations, garage updates, or new construction framing. It shoots single pins from 3/4" to 3" without needing to pre-drill holes.
- Pro Design: Featuring a magnesium body with one piece drive blade of hardened steel, this nailer is ideal for fastening wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs. It's 10 times faster than powder-actuated systems.
- The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
- Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
- Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and DeWalt.
User questions & answers
| Question: | What kind of nail does it use |
| Answer: | No |
| Question: | Where can i find the nails you can use with concrete nail gun |
| Answer: | I used it for attaching pressure treated 2x4’s to a basements concrete floor (18 year old home) and it worked great. |
| Question: | Would this nailer work to fasten osb sheathing to 16ga C purlins |
| Answer: | This is an air gun that drives nails into concrete. Not for Toyota’s |
| Question: | Did this work better than a ramset? I am using it to finish a basement and attach pressure treated wood to my poured concrete floor. Thank you |
| Answer: | They are two different types of tools and is not fair to compare but it is quieter. |
Ramset Power Fastening Systems SDC125C 1-1/4-Inch Pin with Angle Clip (Pack of 100)
Ramset Powder Fastening Systems
Product description
The 1-1/4" Pin w/ Angle Clip is designed for suspended ceilings and other overhead applications. Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel. The 1-1/4 inch pin is preassembled to a 14 gauge angle clip.
- Designed for suspended ceilings and other overhead applications
- Preassembled to a 14 gauge angle clip
- Comes 100 per box
- Shank diameter = .145 Head diameter = .300
- Specifically fabricated to meet the exacting requirements of toughness and durability
Latest Reviews
View all
Rolling Back Packs
- Updated: 30.03.2023
- Read reviews
Toddler Size 9 Shoes
- Updated: 04.02.2023
- Read reviews
Eddie Bauer School Uniforms
- Updated: 18.05.2023
- Read reviews
Case Star Computer Case
- Updated: 09.06.2023
- Read reviews
Rug Runners
- Updated: 31.05.2023
- Read reviews