14 best taper pipe reamers

Product description

1/4 NPT HIGH SPEED STEEL SPIRAL FLUTE TAPER PIPE REAMER

Large End Diameter (Decimal Inch):.4720"

Small End Diameter (Decimal Inch):.4060"

Quality Import

• High Speed Steel

Product description

1/8" HSS Taper Pipe Reamer.

Product description

1/4" HSS Taper Pipe Reamer.

• Simple design
• Easy to use
• Functional
• Practical
• Great value for money

User questions & answers

Product features

Must-Have Pipe Tool:

Mr. Brog Czech Pipe Tool is something every smoker needs to make the most of every bowl packed. The three in one pipe tool will help the smokers to pack, smoke, empty and clean the pipe. This multi-purpose tool can be used with hookah, shisha, pipe and water pipe.

The pick clears the shank of debris to aerate tightly packed tobacco. Once fully enjoyed, the pipe can be easily cleaned with the help of the scoop. Tamper can be used for tamping down the tobacco when the bowl is being packed. It can also be used for crushing the ash together which helps in relighting.

Product description

HHIP 1/8" Taper 3/4 Spiral flute pipe reamer is designed for reaming holes to be tapped with American Standard Taper Pipe Taps (NPT). Right hand cut tapered to 3/4" per foot. Large end diameter is .362. Small end diameter is .316. Flute length is 3/4". Overall length is 2-1/8".

• Right hand cut tapered to 3/4" per foot
• Designed for reaming holes to be tapped with American standard taper pipe taps (NPT)
• Large end diameter is .362
• Small end diameter is .316
• Flute length is 3/4"

User questions & answers

Product description

1/16 HIGH SPEED STEEL SPIRAL FLUTE TAPER PIPE REAMER

NPT Size (Inch): 1/16"

Flute Length (Inch): 3/4"

Flute Type: Left Hand Spiral/Right Hand Cut

Large End Diameter (Decimal Inch) .291"

Small End Diameter (Decimal Inch): .245"

Overall Length (Inch): 2"

Quality Import

• High Speed Steel

Product description

The Alvord Polk 207-2 left-hand spiral flute taper pipe reamer is tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming holes that meet the standard for pipes and holes that will be tapped with American National Standard Taper Pipe threading.

Left-hand spiral reamers are useful for interrupted cuts and in through holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and reamer flute. Left-hand spiral style tools also push chips ahead of the tip of the tool, instead of pulling chips out of a hole. Left-hand spiral reamers are commonly used in through holes, since pushing chips into the hole can cause clogging, which may damage the tool. High-speed steel is a general purpose steel for cutting tools and is compatible with many metalworking materials. It is often lower in price than other cutting tool materials. Square shanks prevent tool rotation in the toolholder.

For reamers in the 207-2 series with taper numbers 1/8 to 1/2 there are six flutes, for taper number 3/4 there are eight flutes, for taper numbers 1 to 1-1/2 there are 10 flutes, and for taper number 2 there are 12 flutes.

Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads.

Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881.

• Left-hand spiral reamers are good for use in through holes (holes that extend all the way through a workpiece), as they push chips ahead of the tool and into the hole
• Spiral reamers are recommended for reaming holes with interruptions, as they prevent damage to the workpiece edge and tool
• Taper pipe reamers are intended for reaming holes to be tapped with American National Standard Taper Pipe threading
• Uncoated (bright) tools have no finish or coating. They are a good choice for general purpose applications
• High-speed steel is a common general purpose steel for cutting tools, is compatible with a variety of materials, and tends to be lower in price than cobalt steel or carbide

• For cleaning up holes prior to tapping.
• Taper 3/4" Per Foot
• NPT: national pipe taper

Product description

1 Set Morse Taper Reamer Set MT0 No.0

• 1 Set Morse Taper Reamer Set
• Model: MT0 No.0
• Material: Alloy Steel
• Package Included: 2pcs x Morse Taper Reamers

Product description

Drill America DWRR series Qualtech High-Speed Steel chucking reamer. It is designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses and machining centers. It is regularly pointed with a 45 degrees chamfer. The straight-flute design is recommended for most general purpose reaming. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
• Round shanks allow use with a wide variety of toolholding systems
• Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts
• Designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses and machining centers

User questions & answers

Product features

Drill America Chucking Reamers

Designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses and machining centers. It is regularly pointed with a 45 degrees chamfer.

Straight and Spiral Flute Available

The straight-flute design is recommended for most general purpose reaming. The right-hand spiral-flute reamer has the smooth, chatter-free action necessary for fine finishes. It is recommended over the straight-flute for more difficult materials, better surface requirements, and applications with an interruption such as a keyway or cross hole.

• Material:45# Steel
• Blade length:92mm
• Total Length:140mm ；Shank Diameter:13mm
• Diameter:1/8" to 1/2" (3.18-12.7mm)
• Package Included: 1pcs Hand Tapered Reamer

User questions & answers

Product features

Atoplee Tapered Straight Flute Handle Reamer Hole Pipe Chaser Reaming Tool,1/8-1/2 inch(3.18-12.7mm)

• Diameter:1/8" to 1/2" (3.18-12.7mm)
• Blade length:92mm
• Total Length:140mm
• Shank Diameter:13mm

Product description

Designed for dependable reaming, the RIDGID 34945 Straight Pipe Reamer has a long, tapered design that will not dig in. Suitable for use with power drives, it's durably constructed to stand up to tough jobsite demands. The pipe reamer tool has an 1/8-inch to 2-inch outside diameter capacity. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 34945 Straight Pipe Reamer has a long taper design that will not dig in. It is suitable for use with power drives also.

• Features a long, tapered design that will not dig in
• The model S reamer is suitable for use with power drives
• Rugged construction stands up to jobsite demands
• Pipe reamer has a 1/8-inch to 2-inch (3 mm to 50 mm) outside diameter capacity
• RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

User questions & answers

Product description

Package Included:

1x Senior Professional Adjustable Tobacco Pipe Reamer

Product brief introduction:

There are 3 levels of pipe reamer’s handle, the diameter of the handle are 13mm, 15mm, 19mm respectively. It is a spiral drill needle when spin out the 13mm handle; and the 15mm handle is used to adjust the size of reamer.

How to use the pipe reamer:

First of all, turn the 15mm handle and adjust it to go deep into the pipe at the bottom of the bowl;

Secondly, modulate the 15mm handle to make it is adjacent to the bowl;

Thirdly, rotate the carbon knife one circle and pulls out, so the excess carbon layer is easily removed.

• [Adjustable] 3 levels of pipe reamer’s handle, fits Most of bowls.
• [Durable] Made by high quality stainless steel
• [Not Only a Reamer Tool] Bit pass needle design, can clean pipe, change part of flue, use as a pokers or tamper, very practical
• [Size]L 5.1 x W 0.75 inches (L 140 x W 19 mm)
• This is the classic senior pipe reamer just about every pipe smoker needs to keep pipes clean and in shape.It also comes with a drill to loosen up difficult blockages. The drill screws nicely into the back of the tool so you always have it handy.The adjustable pipe tool opens and closes to fit the size of any pipe. Hidden shank drill opens smoke holes and removes sludge.

Product description

Tapered Reamers will help Align holes, remove burrs from cut pipe, tubing, and conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials. The heat treated #45 high carbon steel for longer service life. T-Handle design for easy turning and sure handling. Capacity: 1/8" to 1/2" (3 - 13mm) and 5/32" to 7/8" (4 - 22mm)

• Tapered reamers will help align holes, remove burrs from cut pipe, tubing, and Conduit, and enlarge and Countersink holes in sheet metal, plastic, and other materials
• The heat treated #45 high carbon steel for longer service life
• T-handle design for easy turning and sure handling
• Capacity: 1/8" to 1/2" (3 - 13mm) and 5/32" to 7/8" (4 - 22mm)
• Degree of taper: 5.06 degree 1/8 in. to 1/2 in., and 10.43 degree 5/32 in. to 7/8 in.

User questions & answers