13 best three d printers

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

• Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
• Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.
• Resume Printing Function: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing waste.
• Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

User questions & answers

Question:	Does this package come with the spoil holder shown in the first picture
Answer:	Yes, it should come with a spool holder.
Question:	does this printer have thermal run away protection built in the firmware
Answer:	At the time I got mine no it was not but it is not difficult to upload new firmware once you install a boot loader. I have heard that the newer ones do have it enableled
Question:	Does this have auto leveling or manual leveling
Answer:	Manual leveling.
Question:	What software comes with this product? i see retailers offering simplify3d and cura with this printer
Answer:	It comes with a Creality slicer on the SD card. Cura is free so don’t pay more. Just a quick download. Bam. Done. Use the Ender 3 Pro profile. I use Tinkercad for modeling. Also free.

Product features

Why choose Creality 3D Ender-3 V2 3D Printer?

Self-developed Silent Motherboard

The self-developed silent motherboard ensure smooth movement under 50db, no noise during printing.

V-guide Rail with High Standard Stabe to Print

Ender-3 V2 uses the V-guide rail pulley with stable movement, low noise, wear resistance and longer life.

Effortless Filament Feed-in

Rotary knob added on the extruder makes it easier to load and feed filament.

New Injection Tensioner

The XY-axis tensioner supports adjusting the belt tension in a quick and more convenient way.

Brand New User Interface

Ender-3 V2 changes the previous screen into 4.3inch color screen and upgrades the user experience with the newly designed operation UI system. It’s simple and quick to operate. And also this color screen can remove easily to repair, which saves a lot time and energy.

Smart Add-ons

With the tool box integrated to the machine body it is more convenient and quicker for tools organization and storage.

• Silent Motherboard: NOTE: The mainboard is 4.2.2 version but it is silent mainboard which is different from ender 3 mainabord. This Ender 3 V2 equipped with self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• Safety UL Certified MeanWell Power Supply: Creality Ender 3 V2 equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
• Brand New 4.3 Inch UI User Interface: Simple and Clear UI, brand new operation UI system and 4.3" smart touch color screen improve user experience, redesigned for a better out of box experience.
• Effortless Filament Feeding: Ender 3 V2 3d printer adds a rotary knob on the extruder, making loading and feeding filament process much easier.
• Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

User questions & answers

Question:	Will not work after any firmware update (from creality site). freezes at auto-home every time. only works back to 2.0.1 firmware. how do you fix this
Answer:	I had the same issue, I ended up going with an aftermarket firmware. Installed a BL Touch and creality's base firmware wouldn't support it. Do some searching around on which firmware works best for your application.
Question:	What size nozzle does this come with
Answer:	It comes with 0.4mm nozzle.
Question:	What version motherboard does this come with
Answer:	Mine came with 4.2.2
Question:	what size filament spool can you use with this product? I have two different sized1.75 mm spools
Answer:	It can hold 1 pcs of 1kg filament.

Product features

Smart add-ons

With the tool box integrated to the machine body, it is more convenient and quicker for tools organization and storage.

Integrated Structure Design

Easy to assembly and maitain with integrated structure and modular design. The power supply is concealed in the machine, making it much safer.

Glass Platform

The glass platform enables the hotbed heat up quicker and prints adhere better. Untra smoothness even on the first layer.

4040 Y Axis Profile

This Ender 3 V2 3D printer eauip with 4040 Y axis aluminium profile, which is the same as the Ender 3 Pro . This makes the hot bed much more stable than Ender 3.

Resume Printing Function

The machine can automatically resume printing after power-offer or filament breakage. Less worries on print failure.

Big Leveling Nuts

The Ender 3 V2 3D printer comes with 4pcs big leveling nuts under the hot bed, which make it much more easier to level the hot bed.

• Build Volume: 150 x 150 x 150 mm
• Layer Resolution: 0.1-0.4mm
• Max. Print Bed Temperature: 100°C (212°F)
• Filament Compatibility: PLA/ABS/PEARL/PLA Color Change/METAL-FILLED/WOOD-FILLED/High Speed PLA
• Maximum Nozzle Temperature: 230C

User questions & answers

Question:	What is the largest width and length and height it will build
Answer:	Hello and thank you for your question. FlashForge Adventurer 3 Lite has a build volume of 6 x 6 x 6'' (150 x 150 x 150 mm). These dimensions are the maximum width, length, and height the Adventurer 3 Lite can build for your objects.
Question:	are all of the printers 250 V AC plug
Answer:	No, mine has 110 V AC plug.
Question:	Can I use 2.85mm filament with this machine
Answer:	Hello and thank you for your question. All FlashForge 3D printer models, including the Adventurer 3 Lite, work with 1.75 mm diameter of filament only.
Question:	What is the difference between the Lite version and the normal version? Does this one have a camera/wifi printing as well
Answer:	Hello, thank you for your question and interest at the FlashForge Adventurer 3 and Adventurer 3 Lite. The Adventure 3 includes the WiFi camera whereas the Adventurer 3 Lite does not have one. Adventurer 3 comes with a full spool of sample filament. Adventurer 3 Lite comes with a sample size filament in around 50-60g.

Product features

Detachable Nozzle

For ease of cleaning. Making removal and installation of nozzle easy

Quick Heat Up Nozzle

Extremely quick heat up of nozzle to 200°C (392°F) in 50 seconds

Removable Heated Build Plate

Making removal of printed objects hassle free

2.8-Inch Touch Screen

An intuitive UI interface provides simple operation and ease of reading to printer's status

45 Decibel Noise Level

Ultra quiet printing operation providing pleasant printing experience in classrooms, homes, and offices

Auto Filament Loading System

Printing will be suspended when filament is broken or run out, and printing will be resumed after filament is detected and loaded

No Leveling of Build Plate Required

Build plate is leveled at the factory level - calibration maybe required

• FULLY OPEN SOURCE: Creality 3D is working with its wonderful community of users and contributors to improve this open sourced product every day. A design culminating from some of the best and brightest minds in the 3D printing world.
• NEXT GENERATION TECHNOLOGY: Our upgraded control board offers state of the art, "Resume Print" technology. Should your printer suffer unexpected power outages, it will resume from the last recorded extruder position. Goodbye failed prints! The advanced MK-8 extruder's genius design greatly reduces the risk of clogging and uneven extrusion. High precision ball bearing wheels made from Delrin/POM engineering thermoplastic deliver high stiffness, low friction, and excellent dimensional stability.
• HIGH-POWERED, SAFE POWER SUPPLY: The Ender 3 comes with a high-quality power supply, with 2 separate fuses to protect your printer from unexpected power surges, that can heat the build surface to 90*C in just 5 minutes!
• PARTIALLY-ASSEMBLED KIT: The lower base and all wiring completed in our factory. This kit style 3D printer comes with all tools included and is an excellent project for middle school and high school-aged students. The perfect gift to spark a lifelong love for science and engineering, and provide a deeper understanding of machinery and robotics!
• CREALITY 3D OFFICIAL STORE: We are the ONLY official Creality 3D Amazon store! Because all of our products are shipped to the consumer directly from the manufacturer, we provide a 18 month limited replacement part and lifetime technical assistance. Professional customer service has always been a cornerstone of our company philosophy.

User questions & answers

Question:	Is the power supply for this version UL certified
Answer:	Dear Customer, Thank you for your question, Yes, this power supply is UL certified. Thanks, Any other problems, kindly email us [email protected] Creality 3D Direct
Question:	Is this the newer updated version of the Ender
Answer:	Hello, In response to your question, yes, this is the newest version of the Ender 3. We are the manufacturer of this product and as such, we will always only keep in stock the newest versions of our products. Thank you for your interest and if you have any other questions or concerns, please feel free to contact us for more information. Jeff N Creality 3D
Question:	Having problems with extruder about half-way through each of the first two projects. Advice
Answer:	First make sure you have proper heat. PLA I run at 198C. ABS 245C. Next make sure you have PTFE tube is all the way down to the bottom of the print head. PTFE tube goes about an inch or so down into the print head. If it is not fully in could cause heat creep melting filiment to soon clogging before it gets to the nozzle.
Question:	does it come with fillament
Answer:	It comes with just enough filament to do the test print

Product features

Upgrade Unique Official After Sale Service. More Service Time

Enjoy Reliable and Professional Service

We are not only the seller but also a professional manufacturer with 5 years R&D and production experience of 3D printer.All our products were strictly check and test before sent out, 18 months after sale service is our promise. With our 3D Printer, you can enjoy kinds of design, print and DIY fun.Any problem, we have more than 20 engineers provide professional support and Original accessories for after sale.

Resume Print

When attempting some larger prints, even a 3-second power outage could spell disaster for a model already 10 hours or more into a longer print. The Ender 3 comes with a state of the art control board which, in the event of an unexpected power outage or surge, will remember the last recorded position of the extruder. Once power is restored, the control board will automatically restart where the print left off before the loss of power. You can sleep easy while your Ender 3 works hard.

POM Triangle-Slot Wheels

Creality changed the consumer-grade 3D printer market with the introduction of the much improved POM Triangle-Slot wheel design. Previously, printers used smooth metal rods and linear bearings which, during use, were much louder due to the metal on metal sliding. Our POM wheels are made of engineering thermoplastic which is rated as great for use in precision parts requiring high stiffness, low friction, and excellent dimensional stability. These wheels nearly silently guide the moving parts along the aluminum extrusion frame.

Safety Paired With Performance

The Ender 3's power supply is a high quality and safety oriented component that was hand selected for its reliability. This power supply has two safety fuses built into the unit. These internal and external fuses serve to protect all of the valuable electronics and components from any potential catastrophic power surge or electrical discharge while the machine is plugged into the outlet. The Ender 3 power supply can heat the hotbed to over 90* C in just 5 minutes or less, with a full operating range of up to 115* C which opens the door to many types of experimental or exotic filaments that may require higher temperatures for printing.

Design

Popular free to download slicing software such as Cura will divide or "slice" the 3D model into thin horizontal layers. A large multitude of previously designed 3D models are readily available on various internet websites for free. The software then creates a code that your printer can read and understand. Basically a set of instructions for the hardware in the printer. Save this "Gcode" file to a microSD card like a normal file. Many profiles are already available for use with the Ender 3 through Cura.

Ready

Upload the file to your printer via the microSD card. Ensure that the building surface or "hotbed" is level with the nozzle or "hotend" and start the print. The Ender 3 will automatically read the code in the file you selected and start extruding molten plastic filament onto the printing surface.

Printing

Watch as the printer automatically prints the layers on top of each other, one after another with incredible accuracy. The margin of error in the Ender 3 is a minuscule .1 mm in both the X and Y axis, meaning that any errors in the printing process will be almost undetectable to the naked eye.

Complete

Once the printer has finished following the instructions of the Gcode uploaded earlier, it will cease operation and your finished model will be ready to remove from the build surface. Remove the model from the hotbed and use as desired. This process is so simple, even children can be taught and understand the process and technology. Great for introducing kids to "Fun"ctional technology and processes.

Fully Open Source

The Ender 3 is the first fully open source printer to come out of China. Creality 3D is working with its wonderful community of users and contributors to improve this open sourced Ender 3 every day. The result is a design culminating from some of the best and brightest minds in the 3D printing world. All files and relevant source code are available on our Creality 3D GitHub page. Some Benefits of Open Source Projects Include:

Product description

Overview



SainSmart’s latest Creality3D series printer is specifically designed for hobbyists, tinkerers, and the curious. As the premier

entry-level 3D printer on the market, the Ender-3 kit includes everything you need to learn about 3D printing. Brought to you

by the creators of the CR-10, the Ender-3 delivers professional-grade results in an affordable package. Get your hands on one

and unleash your creative side!



WHY CHOOSE SAINSMART?



As an industry leader since 2010, SainSmart offers a 1-year manufacturer’s warranty on 3D printers, so you can rest assured that your purchase is protected.

Contact us for professional solutions recommendations and expect a qualified response within one business day. Buy with confidence!



Machine Parameter:



Printing Technology: FDM

Printing Accuracy: ±0.1 mm

Nozzle Diameter: 0.4 mm

Layer Thickness: 0.1 to 0.4 mm

Nozzle Speed: 180 mm/s

Compatible Filaments: 1.75 mm PLA, TPU, ABS, PETG

Operating Systems: Windows, Linux, MacOS

Compatible Software: Pro/E, Solidworks, Siemens UX, 3DS Max, Rhinoceros 3D

Compatible Formats: .stl, .obj, .mpt, .mpf

Ambient Temperature: 5 to 40° C (41 to 104° F)

Nozzle Temperature: 255° C (491° F)

Heated Bed Temperature: 110° C (230° F)

Connectivity: USB 2.0 connection, SD Flash

Power Source: AC 100-265V 50-60Hz

Overall Size: 440 x 410 x 465 mm (17.3 x 16.1 x 18.3”)

Auto Resume Print: Yes

Spool Holder: Yes



WHAT'S INCLUDED?



1 x Ender-3 3D Printer (LCD Screen, Power Supply, Spray Head Assembly, Spool Holder, Motors, Parts need to be assembled)

1 x Tool Box (50g Testing Filament Included)

1 x Screw Accessories Box



Step by Step Manual:



https://s3.amazonaws.com/s3.image.smart/download/101-91-311/SainSmart_Ender3_Instruction.pdf

https://s3.amazonaws.com/s3.image.smart/download/101-91-311/40-40_PLA_testfile.gcode

• 【Cost Effective】 By eliminating the high retail markup, SainSmart is able to offer a sensible package with unrivaled quality in the entry-level space. The compact design allows Ender-3 to fit in the trunk of your car or even back seat, while still providing 6x more build volume than other entry-level printers.
• 【High Precision & Noiseless】 The CNC-machined Y-axis mounting slot ensures highly precise positioning of the printer head. V-slot POM (polyoxymethylene) wheels allow the nozzle to glide smoothly and silently.
• 【No Clogging or Warping】 Our patented extruder design greatly reduces the risk of a clogged nozzle. There’s no need for printing tape or glue due to the incorporation of a new viscous platform sticker. MK-10[thread M6]
• 【Fast Heating & Resume Print Feature】 The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• 【Semi-Assembled】 This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.

User questions & answers

Question:	Has anyone have or had an issue with a hot spot in center of printbed
Answer:	No, I have not had that issue. Maybe your bed is heating unevenly
Question:	How loud is it? The CR-10 is insanely loud and uses cheap fans
Answer:	Hello, we have upgraded the fan with a better parts supplier to minimize the noise. Compared with CR-10, Ender-3 runs much quieter. Please feel free to contact us at [email protected] if you have any question.
Question:	What's the packaging size for this printer? (i have to consider a 2nd shiping after reciving it from you
Answer:	The package size is 20.1"(L) x 15.7"(W) x 7.5"(H). The gross weight is 17.8lbs.
Question:	Do you need to use any specific software or can your use any models you find on the internet
Answer:	The version of Cura that comes on the SD card with the printer is a bit dated. However, you can download UtliMaker Cura free and tweak a few settings (looking at the file in SD:/Software and USB Driver/CURA/Reference Data/Ender 3.ini) you can get it rocking. Printer settings: Select Creality CR-10 like the instructions say, change the X (width, Y(depth) and Z(Height) as show in the instructions. Choose "Marlin" as the G-code flavor. The firmware is Marlin (which is based on Reprap) if you do some G-code magic it will tell you this. Recommended settings: Layer Height: .15 (higher setting for lower quality, you start to see the lines and it bonds less) !Enable Retraction! Retraction Distance: 8.0mm Retraction Speed, Retraction Retract Speed, Retraction Prime Speed all set to: 80mm/s Retraction Extra Prime amount 8mm(to the 3rd) Retraction Minimum Travel: 0.2mm Print Temp: will vary by filament but I use 231C with Polylite PETG, 82C bed temp, 100%fan. Speed being 46mm/s and works great! The rest of the settings are mostly preference. If you're using it for educational or non-profit reasons, then AutoDesk (makers of AutoCAD) make something called Fusion 3D which is simply amazing. Takes a little learning but they have video series all over their site. Cheers!

Product features

Ender-3 3D Printer

The Ender-3 is designed specifically for hobbyists on a limited budget. Our most affordable 3D printer, the Ender-3 boasts the same outstanding performance as the CR-10, but is even more compact and affordable.

Home & School Use

Being an entry-level 3D printer, the kit is designed to invite imagination and innovation to students and hobbyists. Its low cost expands its availability to school and home settings, while still providing a high-end print quality not found in low-cost printers!

Top Quality Control

The entire assembly consists mostly of only injection molded, CNC machined, and extrusion manufactured parts, ensuring reliable and consistent operation, matched with the quality for every user! The cartesian design, based off the CR-10, provides the same eloquent, robust, and precision construction ready for DIY assembly!

Full Filament Compatibility

The standard brass nozzle allows printing with most types of 1.75mm 3D filaments and of course the renowned SainSmart flexible TPU filament.

Resume Print

If electrical power is lost, prints can be resumed from the last layer when powered back on, saving time and reducing wasted filament!

Without Clogging

Our MK-10[thread M6] extruder design greatly reduces the risk of a clogged nozzle.

Fast Heating

A high-watt density hotbed provides rapid heating, reaching its operating temperature in 5 minutes or less!

Large Build Volume

The 8.7 x 8.7 x 9.8" (220x220x250mm) build area allows you to create large and complex models.

• Fast heating up thanks to it's efficient Meanwell UL power supply, only 5 minutes to heating up the hotbed.
• Resume printing let your prints can be resumed from the last layer if power off or lost, saving time and reducing waste.
• Hotbed Leveling much easier and more precise thanks to its big leveling nuts, easy operation to save your time and more efficient.
• New platform sticker, improved build surface provides protection to your heated bed and easy to remove the printing models after cooling.
• MK-8 extruder, MK8 extrusion mechanism reducing the risk of plugging and spillage, the wheel make it move noiseless, smoothly durable.

User questions & answers

Question:	I've never seen an ender 3 sold with a mk-10 parent nozzle and after reading the reviews, your customers say it doesn't have a mk-10 parent nozzle
Answer:	No it does not. The surface that comes with it works great for parts sticking but it can be very difficult get the parts off.
Question:	Has auto bed leveling
Answer:	1.75 mm filament diameter
Question:	Does it come with the 32 bit board or the 8 bit board
Answer:	Currently we do not offer high temperature extruder option. Thanks.
Question:	Difference between this Pro version and the standard Ender
Answer:	No, it will not fit internally in the filament cassette, but you can feed to the Finder with an external filament holder as this is the same diameter aperture of 1.75mm.

Product features

Why Choose Our Printer ?

• 1, Affordable for both beginners and professionals with great printing quality to start your 3D printing project.
• 2, All of our products come with a 18 Months limited replacement part and lifetime technical support. We provide original part for replacement and provide professional service.

New Y-axis Design

• New Y-axis Design，40x40 Y axis frame design,improving stability of the printing platform.

More Appropriate Fan Position

• More appropriate fan position avoid affecting printing efficiency by the fall of model scraps, ensures printing perfect molds.

Humanized Design

• Portable knob printing with one button, 45°Display Screen easy to check printing progress.

Stylish Design and Sturdy Frame

• Innovative design with aluminum V-slot and prusa i3 frame and one-piece structure ensure large printing size of max 8.7"x8.7"x9.8".

Meanwell Power Supply

• Brand power supply, you can select the appropriate voltage according to your national voltage standard.

Easy to Assembly

• Only need 10 minutes to assemble 20 screws before the first printing, simple assembly but more stable performance, Win-Win for fun time.

Specification

• Printing Size: 220x220x250mm
• Printing speed: 180mm/s
• Printing precision: +/-0.1mm
• Nozzle diameter: Standard:0.4mm, can be in 0.2,0.3mm
• Bed Temp: Less than 110 ℃
• Working Mode: Online or SD card offline
• File Format: STL, obj, amf
• Slice Software: Cura , Repetier-Host , Simplify3D
• Power Supply: Input: AC110~120V 6.8A; AC200~240V 3.4A
• Output: DC 24V 270W

Application Field

BUYERS SHOW

There are many reasons if you can not get a perfect printing model, like the temperature setting or hot bed leveling. But we are always here to help you solve the problem, in this situation, you can send us some pictures or videos to let us know. And we will try our best to solve for you, we are happy to help you.

• RESUME PRINT: The new upgraded control board enables the capacity to resumes printing after changing filament, power outage, or any other unexpected stoppage.
• HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically.
• LARGE PRINTING SIZE AND EASY TO INSTALL： High printing accuracy which meet industrial specifications. Assembly is simple and suitable for DIY customers.CR-10 Mini comes in three pre-assembled parts and takes only 10 minutes to install
• NOTE: The CR-10mini does not come with the right side bracket or the decorative trim. The underside z-axis mounting screws provide all neccesary stability and functionality in this smaller model printer. Support materials include: 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient Color etc.
• CREALITY 3D OFFICIAL STORE: We are the ONLY official Creality 3D Amazon store! Because all of our products are shipped to the consumer directly from the manufacturer, we provide One Year limited replacement part and lifetime technical assistance. Professional customer service has always been a cornerstone of our company philosophy.

User questions & answers

Question:	Dual z-axis? pics doesn't show it, but i read somewhere that it comes with dual z-axis. can anyone confirm single or dual z-axis
Answer:	I also confirm that the Creality3d CR-10 Mini is a single z-axis. Hope that helps.
Question:	does this model have a glass bed included? Or can it be purchased separately
Answer:	It includes the glass bed.
Question:	What other filament is this printer compatible with? can it print abs, wood, etc.? it only specifies about pla
Answer:	I print pla PETG woodfill, carbon fiber and nylon with it. However for anything that you're going to print with a nozzle temp of above around 240 you should upgrade to an all metal hot end or you're going to have major issues.
Question:	The description says it only supports pla. is that true
Answer:	It supports the following: PLA, ABS, PETG, TPU

Product features

Why Choose CR-10 MINI 3D Printer?

Creality CR-10mini desktop semi-assembled kit brand new 3D printer, smaller printing size, easy to assembly,resume printing.

Printing size:300*220*300mm, save more rooms.

Resume Print

The new upgraded control board enables the capacity to resumes printing after changing filament, power outage, or any other unexpected stoppage.

Printing Size

A total printing size of 11.8X8.6X11.8 inches. No longer will you be limited to only the smallest models. Save more rooms.

Warming Note

This CR-10 MINI 3D Printer doesn’t comes with the T-Bracket (right side) and decoration strip.

Because the manual is the universal version for CR-10 /CR-10 MINI, we have marked this information on the manual.

High Printing Accuracy

High printing accuracy which meet industrial specifications. Assembly is simple and suitable for DIY customers.CR-10 Mini comes in three pre-assembled parts and takes only 10 minutes to install.

Stable Printing

Creality CR-10 Mini 3D Printer, Y-axis double screw design, more stable lifting, higher printing accuracy.

High Quality Parts

Super large leveling nuts adjust the hot bed easily, high qiality synchronous belt tighten the axis well.

• 【Great Valueable Bundles】Tresbro Creality Ender 3 Pro 3d printer kits comes with extra two popular upgrades part: 1pcs temperd glass bed and 1pcs metal extruder. With this kit, you will save time to purchase them separately, and most importantly, you have saved 60% cost on these two accessories.
• 【Safe Power Supply】All metal 3d printer Ender 3 Pro with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• 【Resume Print Function】The diy 3d printer kit is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• 【Printing Stability】Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly.
• 【Simple Assembly and More Fun】This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. Great for beginners, houses and schools.

User questions & answers

Question:	What brand of flexible filament can I use with the Ender 3 Pro? thanks
Answer:	With the correct bracket and adjustment, yes this can work. Tons of brackets can be found online as well as tutorials.
Question:	Is this ender 3 pro is lastest version with V4.2.2 32bits mainboard
Answer:	E3D V6
Question:	Is it a wifi printer or do I need to hook my computer up through a cable to connect the two
Answer:	As long as you find a mount for a e3d v6 hotel then it should work
Question:	What's the difference between this and the other creality ender 3 pro 3d printer here on amazon at
Answer:	It’s made to fit anything a standard v6 would, but you might wanna check thingiverse and make sure someone has designed a part cooling duct that will fit your printer.

Product features

Why choose Tresbro?

If you're looking to get into 3D printing for the least amount of money possible, Our Tresbro Creality 3D Ender 3 Pro Ungraded bundle with extra 3d printer glass bed and aluminum extruder is a great bet. This printer is a fantastic value, coupling overall good performance with one of the lowest list prices of the entire group.

Great beginner printer at an outstanding quality

Ender-3 PRO is an upgraded version of Ender-3, comes with the Meanwell power supply and new platform sticker, also redesigned sturdy Y-axis.

It’s an excellent and affordable diy 3d printer for makers, hobbyists, tinkerers, and to some degree even for educated beginners.The Ender 3 Pro is capable of delivering astonishing quality prints that puts pricier printers to shame.

Compared with other Ender-3 PRO 3D Printer at the market, Tresbo provides extra free parts to upgrade your 3D printer, which includes 1pcs tempered glass bed and 1 pcs metal extruder. We believe this absolutely will give you the best printing experience.

Flat Temperd Glass Bed

This glass plate is a popular upgrade for the normal Ender 3 and Ender 3 Pro because of its very good adhesion and fast heating speed. The smooth first layer also increases the aesthetics of your finished models.

Strong Metal Extruder

Upgraded metal MK-8 extruder drive feeder that makes filament loading easier and smoother without worrying about scraping or breaking the filament.

Resume Printing Function

Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.

Safe Power Supply

Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.

Improved Build Surface

The magnetic build surface plate providing all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface; it is easy to remove the printing models after cooling.

Simple Leveling Method

The large hand-turning nuts are ergonomically designed for speed,allowing users to solve time-consuming and labor-intensive tasks.

Redesigned Y-axis

Ender 3 Pro redesigned with a much more sturdy, 40x40 aluminum extrusion for the Y-axis base, which is wider than the Ender-3. This provides stability for the printing process, leading to a better print quality.

High Standard Structure

As patent technology, the V-profile pulley moves more stable and smoothly with low noise and wear resistance.

• Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
• MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
• Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	I am receiving a slicing error that the print is too large. The model is 115mmx115mmx85mm, it should fit build volume. What's wrong with the slicer
Answer:	Try a different program- like Cura or Sli3er They are pretty easy to use, even for an old dog like me.
Question:	Is the whole thing UL certified or just the Power supply
Answer:	My understanding is the power supply is UL listed, and it provides power to the cpu, x,Y,z motors and the feeder and extruder, I've had no issues with mine since purchase 10 months ago
Question:	Would I be able to print masks to donate to hospitals with this printer
Answer:	You can print the masks with this printer if you have the slicer model.
Question:	Can I 3d print a screw with this printer which is 3 inch long and size
Answer:	You would probably be better off printing a straight piece the size of the total screw and then tapping it...

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

• 【FAST AND PRECISE】: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.
• 【RUNAWAY PROTECTION HEATBED】: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on
• 【MUCH STABLE PRINTING】: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
• 【FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY】: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you've run out of filament, saving you time and money
• 【QUIET TO USE】: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you

User questions & answers

Question:	can it use the m600 change filament command to change colors during print
Answer:	With factory Marlin firmware, no. However, there is a person working on firmware, that I actually have loaded mine, that does have m600 filament change working. In the past I have been able to change filament colors in mine using the filament run out sensor it works pretty good in the meantime.
Question:	What types of filaments does it accept (PLA, wood, metal
Answer:	PLA, ABS, TPU, Flexible Materials
Question:	Has the issue with the ptfe lining in the hot end been resolved
Answer:	All I can say I never had a problem with that
Question:	How about this
Answer:	How about that?

Product features

Resume Print Function

Resume printing from the last recorded extruder position after suffering unexpected power failure or filament outage.

Filament Run Out Detection

When the filament detector detects that filament runs out, the system automatically pauses printing and prompts for feeding.

Professional Extruder

Upgraded high precision extruder greatly reduces the risk of clogged nozzle and bad extrusion.

Fast Heating

The printing bed temperature reaches 80℃ in just 80 seconds, the nozzle heats up to 180℃ in just 1 minute

High Precision

Artillery Sidewinder X1 3D printer features a professional aluminum nozzle and a direct extruder with high accuracy, not easy to get blocked

Ready to Print

All you need to do is to check whether the printing bed is leveled. Loading the filament and inserting a micro SD card with preinstalled models to start your 3D printing journey.

Low Power Consumption

The power of Artillery Sidewinder X1 3D printer is lower than the standard 30W, more energy-saving to prevent global warming.

Specification Configuration

• Layer Resolution: 0.1mm
• Frame: Aluminum Extrusion
• XYZ Positioning Accuracy: 0.05mm, 0.05mm,0.1mm
• Printing Filament: 1.75mm
• Nozzle Diameter: 0.4mm
• Machine Dimensions: 550*405*640mm/550*405*870(With Spool Holder)
• Shipping Box Dimensions: 780*540*250mm

• Machine Weight: 14kg
• Shipping Weight: 16.5kg
• Maximum Print Speed: 150mm/s
• Maximum Travel Speed: 250mm/s
• Build Volume: 300*300*400mm
• Extruder Type: Titan Extruder (Direct Drive)

• Easy to Use—Ender 3 V2 has classic appearance in intergratedall-metal body which inherited from its predecessor Ender3. Compared with Ender3, the power supply of Ender3 V2 is concealed in the machine making it much safer and easy to assembly. Ender3 V2 with the toll box intergrated to the machine body and an upgrade user interface, all of these design makes Ender3 V2 easier to assembly and use.
• Stable to Print—Ender3 V2 uses the V-profile pulley with stable movement, lower noise, wear resistance and longer print life. The XY-axis tensioner of Ender3 V2 supports adjusting the belt tension in a quick and more convenient way. And Ender3 V2 uses a rotary knob which added on the extruder makes it easier to load and feed filament. All of these improvements make Ender3 V2 print more stalely.
• Carborundum Glass Platform—Ender 3 V2 uses carborundum glass platform which enables the hotbed heat up quicker and prints adhere better. The carbourndum glass platform makes heating more uniform, ultra smoothness even on the first layer so users can realize quick manual mold taking.
• Silent to Print—Ender-3 V2 uses the self-developed silent motherboard with silent TMC2208 stepper drivers ensures smooth movement under 50dB, no noise during print. Compared to the Ender3 and Ender3 Pro, a V2 design that deliver users out-of-the-box experience and silent-oriented upgardes (quieter 3D printers).
• Smart Resume Printing—Ender3 V2 can automatically resume printing after power-off or filament breakage, which promises less worries on print failure and can help users to save filament at the same time.

User questions & answers

Question:	How long is the warranty
Answer:	since they are relativly cheap I just replace them. I haven't been able to successfully rebuild one.
Question:	Does it come with any needed software? If so - what kind
Answer:	I'm not familiar with Ender 2. On the Cr10S5 the extruder woks well.
Question:	What's the difference between this at $206 and the other MKK creality ender 3 pro 3d printer here on amazon at
Answer:	No,it doesn't work with the Ender 3, our ender 3 hot end kit will be available soon, please see the link : https://www.amazon.com/dp/B07FTMSCSN
Question:	Does this printer work with and print from stl files
Answer:	Sorry,there is no wiring diagram, yes,you need to solder these wires back together,it is very easy,please refer to this video: https://www.youtube.com/watch?v=GVrLmrytVCo&t=79s

Product features

CREALITY ENDER 3 V2 3D PRINTER UPGRADATION OF ENDER3 PRO