12 best starter 3d printer

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

• Entry-level Resin Printer, able to start printing in 5 minutes after put on building platform and resin vat; first choice for stepping your toes into 3d resin printing
• Excellent Accuracy, parallel LED and 16X Anti-aliasing Function make your prints with much smoother details, better than regular resin printer and FDM printer
• UV Cooling System, especially equipped with the cooling system for stabilizing printing performance and extending the 3d resin printer’s service life
• Humanized Design, marks in resin vat and integral FEP film allows you easily to see your resin amount and replace the consumable FEP; Super easy to operate
• After-sale Service, all ANYCUBIC 3D printer are backed with 1-year assurance (consumables excluded) and lifetime technical support

User questions & answers

Question:	Can it print 0.3 mm plate
Answer:	I haven't tried all of the settings - but even printing 0.5 mm thickness regions was tricky
Question:	I noticed some small scratches on the dark film over the led printer. is there a way to fix or replace this? i do not mean the fep replacement
Answer:	If the screen is damaged, the only way to fix is with a replacement screen.
Question:	printer can not see print files? anyone had similar issue
Answer:	I had this issue. You have to use the actual anycubic slicing software. If you use chitubox you need to export it to the anycubic slicer to save it to the usb. The zero uses pws for its file I believe.
Question:	How much could i print with 500 grams of lcd resin
Answer:	500 ML? a lot of minis if thats what you want to know. It really depends how you set up your prints and size and shape, hard to give you a definitive answer

Product features

Marks in Resin Vat

Easily see your resin amount with a quick glance

Integral FEP Film

Simple and quick to replace FEP, enjoy printing with less fuss

Sanded Aluminum Platform

Greatly enhance the adhension between platform and prints

Get Best Exposure Time

Can print 8 differet models with different exporsure parameters at a time allowing find the best exposure time for resin in 1 print

Qicking Slicing

Model Hollowing

Text Fitting

Model Cutting

• Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
• Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.
• Resume Printing Function: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing waste.
• Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

User questions & answers

Question:	Does this package come with the spoil holder shown in the first picture
Answer:	Yes, it should come with a spool holder.
Question:	does this printer have thermal run away protection built in the firmware
Answer:	At the time I got mine no it was not but it is not difficult to upload new firmware once you install a boot loader. I have heard that the newer ones do have it enableled
Question:	Does this have auto leveling or manual leveling
Answer:	Manual leveling.
Question:	What software comes with this product? i see retailers offering simplify3d and cura with this printer
Answer:	It comes with a Creality slicer on the SD card. Cura is free so don’t pay more. Just a quick download. Bam. Done. Use the Ender 3 Pro profile. I use Tinkercad for modeling. Also free.

Product features

Why choose Creality 3D Ender-3 V2 3D Printer?

Self-developed Silent Motherboard

The self-developed silent motherboard ensure smooth movement under 50db, no noise during printing.

V-guide Rail with High Standard Stabe to Print

Ender-3 V2 uses the V-guide rail pulley with stable movement, low noise, wear resistance and longer life.

Effortless Filament Feed-in

Rotary knob added on the extruder makes it easier to load and feed filament.

New Injection Tensioner

The XY-axis tensioner supports adjusting the belt tension in a quick and more convenient way.

Brand New User Interface

Ender-3 V2 changes the previous screen into 4.3inch color screen and upgrades the user experience with the newly designed operation UI system. It’s simple and quick to operate. And also this color screen can remove easily to repair, which saves a lot time and energy.

Smart Add-ons

With the tool box integrated to the machine body it is more convenient and quicker for tools organization and storage.

Product description

Meet the new kid on the block, the user-friendly, home-friendly, and wallet-friendly 3D printer from FlashForge is ready to play. Loaded with easy-to-use features, and designed to be at home in kids rooms and classrooms, the new FlashForge Finder is the first choice for 3D printing novices and educators. Beginners benefit from the slide-in build plate, assisted bed-leveling, and intuitive color touchscreen. And parents and teachers appreciate its quiet and safe operation. The Finder uses only non-toxic PLA, and the heated components are safely encased. The creative world of 3D printing awaits, and the FlashForge Finder is here to show you the way. What’s in the box? Quick start guide, After-sales service card, Power cable, Filament guide tube, Tool bag, Finder 3D Printer, Start-up PLA filament, Power adapter, USB cable, Solid glue. Printing technology- FFF (Fused Filament Fabrication). Build volume: 140 L x 140 W x 140 H mm. Layer resolution: 100-400 microns, adjustable. Positioning precision: 11 microns on x and Y and 2.5 microns on Z. Filament diameter: 1.75 mm. Nozzle diameter: 0.4 mm. Frame and body: plastic and alloy. Extruder quantity: one. Product dimension: 420 x 420 x 420 mm. Product weight: 13.5 kg. Software: FlashPrint. Printing via Wi-Fi, USB cable，USB stick and Cloud. Printing material: PLA

• Slide-in build plate allows printed objects to be easily removed
• 3.5-Inch full color touchscreen with intuitive icons makes for easy operation
• Sturdy, plastic alloy construction ensures stable prints
• Safe, non-heated build plate
• Wi-Fi, usb and flash drive connectivity.Positioning Precision: 0.0001 inch on Z axis, 0.0004 inch on XY plane Resolution: 0.004 inch

User questions & answers

Question:	How large a piece can you make with this printer? Can you make cookie cutters
Answer:	It has to fit in a six-inch square space. You could make cookie cutters. There's some debate, however, about using PLA printed items with food. I would read up on that.
Question:	Can this printer do laser engraving like bibo 3d printer
Answer:	No this can not laser engrave. I bought the Bibo 3d printer because it sounded like it was amazing. It sits on my shelf collecting dust. The FInder 3D printer I use all the time. I have one at home and one at school that my students just love too. The finder is all put together and ready to go with a few adjustments. The Bibo you will have to put together. I would not recommended the Bibo for beginners.
Question:	Will hatchback filament fit this printer
Answer:	No, the spool does not fit the Finder's cartridge but you can still use Hatchbox filament by feeding from outside.
Question:	Does this printer come with PLA or do you have to buy it separately
Answer:	The package comes with a roll of PLA filament. Thanks.

Product features

Slide-in build plate. Easier 3D prints removal

Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At same time, it can minimize damages or offsets to the build plate.

Intelligent assisted leveling system. More precise and easier calibration

Finder features an intuitive calibration detection system to assist leveling. You are directed to tighten or loosen leveling screws until a beeper barely sounds, then it detects the distance between nozzle and build plate to verify whether your leveling is at the right position. Once the first location is leveled, you’re directed to next two screw locations accordingly with same operation. In this whole process, you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise than before.

Quiet during operation

Finder is equiped with super quiet printing desiging, the sound of operation is low to 50 decibels, provides a quiet printing experience for colleague and family!

2nd Generation Wireless connection. More stable.

Finder features the 2nd generation Wi-Fi connection with more stable wireless file transmission. And now you can send 3D files from your computer to Finder 8GB memory with your own Wi-Fi network under AP or STA modes.

Colorful Cloud experiences

Finder supports 3D Cloud function. 3D Cloud not only allow you to store, edit, share and printing status checking online, but also provides you a massive model database.

Product description

Start your 3D printing adventure By downloading some of the 4, 500+ Free 3D models available from our online XYZ 3D gallery. We have nine categories that include everything from toys and games, to art pieces and educational items. Students and teachers get free access to our online Curriculum Education Program, steam, which helps K-12 science, technology, engineering, arts, and mathematics educators to incorporate 3D printing into their classroom.

• Compact and productive: The da Vinci mini is 30％ smaller than da Vinci Jr. 1.0 and has a 5.9" X 5.9" X 5.9" Aluminum printer bed for larger and finer prints
• Connect wirelessly to your home network for easy 3D printing
• The Da Vinci mini filaments are made using PLA plastics derived from corn starch, making them environmental and non-toxic
• The Da Vinci mini streamlines its printing function through a single-button printer design as well as providing different colored LEDs to indicate printing Conditions
• Make your dreams into reality with the FREE downloadable version of XYZmaker 3D modeling design software for beginners. Connector type: Wi-Fi (802.11b/g/n); USB 2.0

User questions & answers

Question:	What is the power input requirements? 100-240V, 50-60hz
Answer:	yes, correct. 100-240V, 50-60hz
Question:	I have no 3D printing experience and want to dabble in it. Will this do the trick? I've been "researching" for weeks, but there's so many
Answer:	This 3D printer is wonderful for beginners. I personally have several XYZprinting brand 3D printers, and had the pleasure of beta testing this model, of course most of their models are fairly user friendly and easy to use, but when it comes to cost you can't beat the XYZprinting Da Vinci Mini, when it comes to a beginner's level 3D printer. I would absolutely suggest you buy this as your first 3D printer. Have fun with your first 3D printer, which ever you decide on.
Question:	Is there a touch screen on the printer like 3dwox or bibo 3d printer
Answer:	You don't really need one, because this printer connects directly to your PC for control, unlike some printers where you have to put the file on a flash drive, necessitating the screen. You computer screen is the control screen.
Question:	Is this user ready? Do you need anything else to start using it (software, etc
Answer:	About 15 minutes of easy assembly. The software is downloadable from the webpage, however they do not list in the amazon listing that you must have an Intel i5 to run the software, NO AMD processors. I found this out the hard way.

Product features

Ready to Print

As it prints with XYZprinting filaments only, there is no need to adjust material settings. With the free starter filament and the auto-calibration function, you can start your first print right away.

The da Vinci mini weighs less than 18 lbs. It is light enough to easily move around your house for any projects.

Upgrade to Print More

With a simple upgrade to our Hardened Steel Nozzle, you can create exotic prints using metallic PLA and carbon PLA too. With its big print volume 5.9" x 5.9" x 5.9" , the da Vinci mini w + lets you turn all your ideas into reality.

Hassle-free Operation

All XYZprinting printers come with CAD and slicing software. The user-friendly UI design will lead you all the way from modeling to printing.

Print safely

The PLA filament our printer uses is derived from natural materials, such as corn, sugarcane or other sugar-containing crops, giving you peace-of-mind to leave the printer printing quietly in the corner.

K-12 STEAM

Based off NGSS principles, XYZprinting provides over 30 ready-to-teach lessons online, which encourages collaborative learning and problem-solving skills of your child or student.

Online Gallery

We have a big community of passionate and creative designers who have shared more than 3000 3D models for free download. Join the community and create together.

Wifi connectivity

The da Vinci mini w+ can connect wirelessly to your home network for easy 3D printing throughout your home, office, or classroom.

Technical Support

Besides our online ticketing system, you can also reach out to our technical support via Skype or telephone.

• Ease of Use: Five-minute assembly, plus with an auto bed leveling system, the CR-6 SE brings you an unrivaled out of box experience.
• A Quiet Beast: 32-bit silent motherboard, Atmega2560 control chip, and 24V 350W MeanWell power supply enables the CR-6 SE to heat up quickly and consistently with reduced noise.
• Pro Performance: robust aluminum frame, dual lead screws and adjustable timing belt contribute to delivering a smoother print finish of the prints.
• Quality of Life Addons: Flexible hotbed clips, foldable filament holder for easy storage, stepper motor covers deliver a cleaner look.
• Smooth Printing Experience: The Newly-Designed Extruder on the CR-6 SE allows for a quick and painless filament feeding and the carborundum glass bed for better adhesion and easier removal, together with the filament run-out sensor and resume printing function will keep you printing, not troubleshooting problems.

User questions & answers

Question:	Does it come with Filament or just the Printer
Answer:	Yes, it will come with a small spool of filament for you to test.
Question:	Just to be sure - in the US do I want this on 115v or 230v
Answer:	Hi, the power supply has the option for both. The US uses 110-120v.
Question:	Has Creality fixed the mainboard issue of shorting out and causing smoke to come out of the control box yet
Answer:	Yes they have.
Question:	How do I know if the units being sold on Amazon have the mainboard and power switch shorting issues fixed
Answer:	The one I got is fixed and i got it 2 months ago.

Product features

Auto bed leveling system

Leveling the bed is fundamental to quality 3D prints but hard to master. The easy to use leveling system will get you off to a great start without the fuss.

Five-minute setup

The Creality CR6-SE comes assembled. Plug everything in and you're ready to go!

4.3 inch Touch Screen & Simple UI

With a 4.3 inch full color touchscreen and an upgraded user interface that prioritize ease of use, the CR-6 SE is an ideal choice for beginners.

How the CR-6 SE provides you a smooth printing experience?

• Cold and quiet: CR-6 SE uses enhanced heatsinks with better heat dissipation. In combination with the TMC2209 Motor Drivers , it enables quiet for silent and accurate printing.
• Modular nozzle: The stock nozzle in the CR-6 SE adopts a modular design that allows for customization. The design also makes it easy for spare part replacement.
• Filament run-out sensor & Resume printing support:No longer will running out of filament mid print will ruin a job, your print will pause and wait for you to load filament before continuing. In case of a power outage Keep you 3D Printing objects uninterrupted, your print job will resume right where it left off.
• Add-ons that improve your overall printing experience:
  • Adjustable belt tensioner
  • Tool storage compartment
  • Portable carry handle
  • Dynamic coupling
  • Silicon hotbed cable protector
  • Hotbed fixator
  • Wide Y-axis profile

New Extruder Design

Redesigned for a smooth and straightforward filament feeding.

Carborundum Glass Bed

Better adhesion when you need it, and easier to remove prints when cooled.

Improved Performance

Sturdy aluminum frame, dual Z-axises and an adjustable timing belt, the CR-6 SE can print with less vibrations and wobble, and thus produce greater results.

• START PRINTING IN 30s: The printer comes fully assembled. Quick set up with the attached step-by-step installation guide. Easy to start your printing in 30 seconds. (Remove the protective clip on the z-axis before use)
• COMPACT BODY DESIGN: This 3D printer is compact enough for office/classroom/studio desk. 19.5*19*27cm body won't take up much space on your workbench and easy to carry. Print your idea as soon as you feel inspired!
• HIGH-QUALITY: Axis position accuracy is 0.1mm (X. Y. Z). 110 x 110 x 120mm printing size allows you to have enough space to make your ideas come true with ultra-fine details.
• SAFE AND SECURE: With FCC CE ROHS certification, this affordable 3D printer comes with a roll of 200g PLA filament. PLA filament doesn’t release toxic gases to give children a healthier environment.

User questions & answers

Question:	Can I use my own TF card
Answer:	Yes! 1. It is recommended that the memory not exceed 32G; 2. Please do not put other irrelevant files in the card, especially software
Question:	What happens if I run out of filament during a print
Answer:	The print will fail. You’ll definitely want to keep an eye on your filament so you can swap out before it gets too low.
Question:	Is it really fully assembled and I can start printing out of box
Answer:	Firstly, you need to remove the two white plastic protective clips. And then, insert the white transfer pipe into the heater head and the extruder. Place the printing plate. Then you can insert the filament and start printing. Read the manual and you will find it easy!
Question:	Does it have a heated bed
Answer:	No it doesn’t. I didn’t have too much trouble though. The bed has a nice texture for adhesion.

Product features

Mini Desktop 3D Printer

This is a fully assembled desktop 3D printer for those who is entry level and interested in 3D printing. Its inexpensive cost and easy setup let you enter 3D printing world not that difficult. Beginners can easily start with the TF card that contains many model files. Senior users can print their custom design.

Although it is for entry level, basic 3D printing knowledge is necessary. Please read the user manual and do some researches before using. Any questions feel free to write to us.

Support online printing

Support online printing and offline printing. Advanced users can use the included USB cable to print your custom design from your desktop or laptop directly. The driver and software are in the included TF card.

LCD screen & Knob

LCD screen allows you to monitor the working status of the printer at any time and turning the knob can easily control the printer.

Hidden wiring Design

The ABS shell material and high-quality power supply are in line with children's safety requirements. Hidden wiring ensures safety during use.

Product description

The voxel is a unique, easy to use, beginner-friendly 3D printer that brings 3D printing to the masses with its simple menu system displayed on a 2. 8" Color IPS touch screen. The assisted leveling system reduces calibration to a single tap on the touch screen and the print nozzle can be swapped out in seconds, without the need for tools of any kind. It features 8GB of internal memory for storing 3D models, A USB port for connecting a flash drive, a; radio with a hot spot option for connecting your PC, and a built-in camera for monitoring print operations. Best of all, the printer comes fully assembled and includes sample 3D models and filament, allowing you to start printing within minutes of taking it out of the box. Quick change nozzle heated removable build plate assisted leveling internal memory quick change nozzle: unlike other 3D printers, which require tools and 20-40 minutes of work to replace the nozzle, The voxel has a quick change nozzle that allows you to change the nozzle in seconds, without the need for tools of any kind. Heated removable build plate: The removable, flexible build plate makes removing a model A breeze. Simply remove and flex it to dislodge the model. You can easily replace it if it becomes damaged or can swap in a second build plate to start a new print immediately after completion of a project. Additionally, it can be heated to temperatures up to 60° C. Assisted levelling: assisted beds leveling makes the process of setting up the print beds as easy as a single tap to the touch screen interface. Internal memory: the printer has 8GB of internal memory.



This product can expose you to Lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov

• Quick change nozzle: unlike other 3D printers, which require tools and 20-40 minutes of work to replace the nozzle, The voxel has a quick change nozzle that allows you to change the nozzle in seconds, without the need for tools of any kind
• Heated, flexible, and removable: The removable, flexible build plate makes removing a model A breeze. Simply remove and flex it to dislodge the model. You can easily replace it if it becomes damaged or can swap in a second build plate to start a new print immediately after completion of a project. Additionally, it can be heated to temperatures up to 60°c
• Auto Leveling: the printer ships fully calibrated and ready to print out of the box. If necessary, you can easily adjust the distance between the nozzle and the bed via the touch screen interface.Operating compatibility: Windows XP/Vista/7/8/10, Mac OS X, Linux
• Auto feeding with filament sensor: makes loading filament simple. Insert your filament into the printer’s filament loading Port, then tap ‘load filament’ on the color touchscreen menu. Additionally, a built-in sensor recognizes low filament levels and will pause prints in progress until filament is reloaded
• Please visit Monoprice website and search for 'voxel' Or Type Part number 33820 in the search bar to visit the product page and download the latest software and manual

User questions & answers

Question:	Does this print with any type of pla? i would like to use the woods and metals
Answer:	It can, you just have to change your temperature settings in the software when your slicing your print.
Question:	Length, width, height of the printer
Answer:	Dimensions 15.7" x 15.0" x 15.9" (400 x 380 x 405 mm) Weight 19.8 lbs. (9.0 kg)
Question:	What software do I use to create 3d projects the monoprice website is a mess and I can't find anything
Answer:	If you wish to create 3D project yourself, then you can use any 3D designing program, but it is recommended to put it through Flashprint first before sending it to the printer.
Question:	Can this use abs
Answer:	It does support ABS, but it is recommended that you try to stick to PLA and PLA plus as this printer does not reach full ABS temperatures.

Product features

Monoprice Voxel 3D Printer - Black/Gray

The Voxel is a unique, easy to use, beginner-friendly 3D printer that brings 3D printing to the masses with its simple menu system displayed on a 2.8" color IPS touch screen. The assisted leveling system reduces calibration to a single tap on the touch screen and the print nozzle can be swapped out in seconds, without the need for tools of any kind. It features 8GB of internal memory, a USB port, a Wi-Fi radio with a hotspot, and a built-in camera for monitoring print operations.

Quick Change Nozzle

The Voxel has a quick change nozzle that allows you to change the nozzle in seconds, without the need for tools of any kind.

Heated, Flexible, and Removable:

The removable, flexible build plate makes removing a model a breeze. Simply remove and flex it to dislodge the model. You can easily replace it if it becomes damaged or can swap in a second build plate to start a new print immediately after completion of a project. Additionally, it can be heated to temperatures up to 60°C.

Assisted Leveling

Auto Leveling: The printer ships fully calibrated and ready to print out of the box. If necessary, you can easily adjust the distance between the nozzle and the bed via the touch screen interface.

Polar Cloud Enabled

Polar Cloud Enabled: The MP Voxel comes Polar Cloud enabled straight out of the box, meaning you can control your 3D printer from anywhere with an internet connection, connect and manage multiple printers at once, queue print jobs, slice models, access unique educational curriculum, and even check in on how your print is doing with the built-in web cam!

• FAST HEATING & RESUME PRINT： The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• PRINTING STABILITY： Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
• REMOVE EASILY:Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
• BRAND POWER SUPPLY:The brand power supply delivers more power with a stable output ensuring the temperature fluctuations are minimized, especially during long and intensive prints. Heat the hotbed faster and to higher temperatures before making the Ender 3 Pro a much better option for printing ABS and other high temperature high strength filaments.
• OFFICIAL CREALITY 3D AMAZON STORE. All of our products come with a 18 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service.

User questions & answers

Question:	If i order the ender 3 pro today. will it come with the 1.1.5 mainboard? if i am buying new i would expect it to be the latest design
Answer:	Dear Customer, Thank you for your question. Sorry, this ender 3pro with the 1.1.4 mainboard, the 1.1.5 is the silent mainboard. You could purchase it in below link. https://www.amazon.com/Creality-3D-Upgrade-Motherboard-Mainboard/dp/B07TJNX4FB?ref_=ast_sto_dp&th=1&psc=1 Thanks. Best wish Creality 3D Direct
Question:	does it ship with us power plug the last pic show not us plug
Answer:	Yes, a normal 120v 3 prong plug.
Question:	Has this printer have removable timing pulleys
Answer:	The printer is essentially a big kit that you assemble (with a good deal of it pre-assembled for you). So, technically you could change out almost every part of this printer.
Question:	i've just got it, im new starter, Anyone knows what software type that i can learn create/design printed model (website/link), thank you
Answer:	When you are just starting I highly recommend tinker cad. I started creating on there and it made it very easy starting and I learned more about my ender3 as well. Now after 2 years I’m using more complex software and even sculpting using zbrush but I have a soft spot because of how easy tinker cad is to use. I am even using it to help my daughter understand complex shapes all can be made using simple designs. Start small then build big.

Product features

More stable, More durable, Easier to operate.

Ender-3 Pro is an upgraded version of Ender-3, upgrade power supply, magnetic build surface plate, aluminum extrusion. Ender 3 Pro is the most suitable printer for beginners.

Easy to install

• Only 10 minutes with 20 screws assembly before the first printing, simple assembly but more stable performance, Win-Win for fun and time.

Safe Power Supply:

• Ender 3 Pro comes with a Mean Well UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.

Update Triangle-Slot

• Triangle-Slot cooperate with Prusa I3 frame: extremely innovative design, following the step of the trend, integrating with classic elements, create a new generation economic DIY 3D printers.

Patent Technology

• Upgraded extruder greatly reduces plugging risk and bad extrusion; Patent Technology: Triangle-Slot with POM wheel make it move noiseless, smoothly and durable

Magnetic Build Surface

• Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.

Improved Mechanical Properties

• The Ender 3 Pro has been redesigned with a more sturdy, 40×40 aluminum extrusion for the Y-axis base. This should improve the overall stability of the printing surface.

Large Build Volume

The 8.7 x 8.7 x 9.8" (220x220x250mm) build area allows you to create large and complex models.

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

• Print Size: 220x220x250mm ( 8.6"x8.6"x9.8"), Industrial grade silicone wire and a power supply built into the base make this machine safe and durable
• Filament Run Out Detection: the printer will warn you when it runs out of filament or there is a problem pulling filament from the roll. You will have the opportunity to resolve the issue and continue printing
• SD Card hot plugin: If for any reason you happen to remove the SD Card during the printing process, by reinserting the SD Card you can continue printing
• Stability: The sturdy metal base and side filament holder make it easy to change the filament without disturbing the printing process
• Easy to Assemble: with only eight mostly-assembled modules to combine, total assembly of the machine can typically be completed in under two hours.

User questions & answers

Question:	inluye el filamento
Answer:	3meter testing PLA only
Question:	Is it noisey
Answer:	it is normal voice :-)
Question:	Is this model compatible with a Raspberry Pi running Octoprint
Answer:	Yes , I have Octoprint with Raspberry Pi 3B hooked up to my Magic and it works very well. No issues.
Question:	How difficult to build
Answer:	I had just built it and it is relatively easy. I was done in roughly and hour and a half. Would have been done sooner but I didn’t follow the instructions which was my fault.

Product features

JGMAKER Magic 3D Printer with Built-in power supply

• One-piece structure,extremely innovative design,create a new generation DIY 3D printers.
• DIY components,it comes with three assembled parts, fast assemble, you can enjoy the fun of assembling by yourself.
• Adopt Industrial grade silicone wire and high quality aluminum profiles with all metal base and build in power supply which ensure the printer quality and safety.

Resume Print with Filament RUN-OUT Detection

• Filament RUN-OUT detection: The machine beeps when your filament runs out to allow you to change the filament and avoid a failed print
• Power Fuilaur Detection: Resume printing from where the last print was stopped due to power failure. Saving you valuable time and filament
• Memory Function: Resume print due to SD card removed accidently, If for any reason you happen to remove the SD Card during the printing process, by reinserting the SD Card you can continue printing.

Print Size: 220*220*250mm

• The Magic 3d printer is a perfect tool meant to inspire and drive imagination, creativity, and ingenuity, the print size is 220 x 220 x 250 mm, which support for most models
• Built-in power supply design creates a more elegant appearance and is a safer option than the exposed design on some other machines.
• Machine Size：443*450*472mm
• Machine Weight：8kg
• Packing Size：550*465*175mm

• Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
• MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
• Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	I am receiving a slicing error that the print is too large. The model is 115mmx115mmx85mm, it should fit build volume. What's wrong with the slicer
Answer:	Try a different program- like Cura or Sli3er They are pretty easy to use, even for an old dog like me.
Question:	Is the whole thing UL certified or just the Power supply
Answer:	My understanding is the power supply is UL listed, and it provides power to the cpu, x,Y,z motors and the feeder and extruder, I've had no issues with mine since purchase 10 months ago
Question:	Would I be able to print masks to donate to hospitals with this printer
Answer:	You can print the masks with this printer if you have the slicer model.
Question:	Can I 3d print a screw with this printer which is 3 inch long and size
Answer:	You would probably be better off printing a straight piece the size of the total screw and then tapping it...

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.