13 best budget sla printer

• Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
• UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
• Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3" smart color screen greatly improve user experience.
• Resume Printing Function: Can resume printing from the last recorded extruder position after suffering unexpected power outages, saving your time and reducing waste.
• Carborundum Glass Platform: Enable the hotbed heat up quicker and prints adhere better without the warping. Ultra smoothness even on the first layer.

User questions & answers

Question:	Does this package come with the spoil holder shown in the first picture
Answer:	Yes, it should come with a spool holder.
Question:	does this printer have thermal run away protection built in the firmware
Answer:	At the time I got mine no it was not but it is not difficult to upload new firmware once you install a boot loader. I have heard that the newer ones do have it enableled
Question:	Does this have auto leveling or manual leveling
Answer:	Manual leveling.
Question:	What software comes with this product? i see retailers offering simplify3d and cura with this printer
Answer:	It comes with a Creality slicer on the SD card. Cura is free so don’t pay more. Just a quick download. Bam. Done. Use the Ender 3 Pro profile. I use Tinkercad for modeling. Also free.

Product features

Why choose Creality 3D Ender-3 V2 3D Printer?

Self-developed Silent Motherboard

The self-developed silent motherboard ensure smooth movement under 50db, no noise during printing.

V-guide Rail with High Standard Stabe to Print

Ender-3 V2 uses the V-guide rail pulley with stable movement, low noise, wear resistance and longer life.

Effortless Filament Feed-in

Rotary knob added on the extruder makes it easier to load and feed filament.

New Injection Tensioner

The XY-axis tensioner supports adjusting the belt tension in a quick and more convenient way.

Brand New User Interface

Ender-3 V2 changes the previous screen into 4.3inch color screen and upgrades the user experience with the newly designed operation UI system. It’s simple and quick to operate. And also this color screen can remove easily to repair, which saves a lot time and energy.

Smart Add-ons

With the tool box integrated to the machine body it is more convenient and quicker for tools organization and storage.

• 【SLA 3D Printer】Entry-level UV light curing LCD 3D printer. Machine preassembled and easy setup. Rapid prototyping with high precision details. LCD printers have higher precision than FDM printers.
• 【24 Parallel LED Lighting】Compare to other printers(4 spotlights), this 3d printer uses 24 parallel LED lights. Improved printing quality, curing speed and substrate adhesion with parallel LED lighting and uniform lighting intensity distribution.
• 【Smart and Fast Slicing】LONGER self-developed slicing software. Output 100M slicing file in 1 minute, 3 times faster. Smart support generation in one-click, enhanced cross-link structure. Also supported by CHITUBOX.
• 【Easy to Use】Full color touch screen, preview and monitor print status in real-time. Easy leveling. Full metal body, Robust adhesion. Safety temperature warning system.
• 【Warranty and Service】NOTE: The printer comes without resin. 12-Month machine warranty (4.5'' LCD Screen and FEP film excluded) and Lifetime Technical Support. High-efficiency and considerate community support on Facebook.

User questions & answers

Question:	Is this printer compatible with a mac
Answer:	Yes, our slicing software supports Windows and Mac, and we can use our own developed software" LongerWare" (this will be easier to operate) or Chitubox software for slicing.
Question:	Is this printer have resume printing when it works for long time with high temperature? I want to be sure before try it
Answer:	Yes. This printer has a unique device that monitors temperature during the printing process, automatically pause or stop printing when the temperature exceeds limits, resume printing when temperature normalizes. Hope this to be helpful for you, you can contact us, we have 24hrs technical support.
Question:	How many 28mm miniatures would I get out of a 500mL or a 1000mL bottle of resin
Answer:	Assuming 28mm tall, 15 mm wide, and 7 mm deep, that gets you 2.625 cm^3. Assuming supports are about 1/4 the volume of the figurine, that’s 3.28 ml per figurine. 1000/3.28=305 figurines 500/3.28=152 figurines But 28 mm is miniscule. You won’t be able to see anything without a magnifying glass (though the printer can still handle it if you get the settings right)
Question:	What is the LCD resolution
Answer:	Orange 10 LCD resolution is 854*480 Pixel, LCD pixel size is 115μm, hope this to be helpful for you.

Product features

Why you need a 3d printer of LCD?

LCD Printer vs FDM Printer

-Precision. LCD printers have higher precision and can print models with greater details like miniatures and jewelry, while FDM can not.

-Ease of use. SLA LCD printers don’t require as much setup as FDM printers, easier to start printing. The software of LCD printers is relatively simple to use. Far fewer settings to adjust vs FDM printers.

-New Technology. As LCD new technology develops, LCD printers become more popular.

Do not miss LONGER Orange 10 3D printer which is Entry-level, Affordable, Easy to use, Better Printing Quality, and Full of Fun!

Uniform UV Light Design

Upgraded UV-LED Module, provide special optical path design, uniform distribution of energy, both contribute to enhance prototype precision, you can get a better printing result.

Resin Flow Back Design

The declined plate facilitates the resin flow back to the material vat. Prevent drip out and waste. Metal printing platform is not only beautiful but also not easy to wear, has longer using life, which still looks like the new one even many years later.

Full Touch Color Screen

This 3d printer equipped with 2.8-inch colorful touch screen, you can preview model, choose file etc, which makes operation easier and convenient. It supports offline printing by transmitting printing job file data from the TF card (8G comes with the printers).

Standarded Printing Size

The printing size is 3.86 x 2.17x 5.5 inch,which is designed accordding to the market survey, can meets the needs of more than 90% customers, especially suitable for teaching, amateurs, designer and artists etc.

Smart Support and Fast Slicing

Automatically detect suspended parts with one button and add cross-linked grid support, which is more stable, to increase the success rate of complex models printing. Professional slicing software output 100M slicing file in 1 minute, 3 times faster than open source solution.

High Temperature Warning

This sla 3d printer equipped with temperature detective, when the UV LED temperature is abnormal, it will auto pause, and resume print after back to normal, provide a safe printing environment and save materials.

Product description

Why LCD? LCD Printer vs FDM Printer -Precision. LCD printers have higher precision and can print models with greater details like miniatures and jewelry, while FDM can not. -Ease of use. SLA LCD printers don’t require as much setup as FDM printers, easier to start printing. Software of LCD printers is relatively simple to use. Far fewer settings to adjust vs FDM printers . -New Technology. As LCD new technology develops, LCD printers become more popular. So, why not Orange 10 3D printer? It is fun!

• SLA 3D Printer. Rapid prototyping, big printing size with precise details. Valued entry-level LCD light curing 3D printer.
• Smart Supports Generation. One-click generates supports with cross-link enhanced structure, easy to add, modify or delete supports.
• User Friendly. The resin 3D printer with 2.8' full color touch screen, a friendly interactive interface allows you to preview and monitor print status in real-time.
• Fast Slicing. Longer self-developed slicing software allows you to quickly output 100M slicing file within 1 minute.
• The resin 3D printer comes with you need accessories and tools, includes shovel, filter, gloves, FEP films, TF card, and tool kit.

User questions & answers

Question:	What size FEP film should be ordered for the longer
Answer:	Yes.
Question:	what do I use to rinse my prints and what happens if I dont
Answer:	Yes, pls. refer to this video：https://www.youtube.com/watch?v=GiLYoyPwdAU&list=PLkFeYZKRTZ8YzSxenEPifd1EgF2HYLRdt&index=13&t=0s The direction of the mipi interface is especially important. If the direction is wrong, the 2k screen does not work. Or burn out the motherboard.
Question:	I’d like to print the jewelry, what’s the overall dimension of printing? Is it able to print jewelry
Answer:	Hi, machine wash of the doodle mat will damage it and cannot be used again, it is not recommended.
Question:	What is the difference between this and the Orange 10? Just the size
Answer:	no, just one, but isn’t a problem, the water don’t come out

• 【Fast Printing and less maintenance】Mars 2 Pro comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
• 【Outstanding prints and ultra accuracy】Brand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
• 【Sturdy build quality】CNC machined aluminum body makes Mars 2 Pro a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
• 【Multi language interface】Mars 2 Pro now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barriers. The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
• 【Warranty and Service】We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Mars 2 Pro comes with 2 extra FEP films for you to replace the original one if needed.

User questions & answers

Question:	Does this come with a starter bottle of resin? I thought so but I’m not seeing one, so i wanted to make sure...thanks
Answer:	No. I recommend the water washable resin. It costs a bit more but you get the same results without the hassle and expense of buying 90%+ alcohol to rinse your completed pieces and wash the tank.
Question:	I saw a new review on this machine saying that now it comes with some sort of protection for the screen and was wondering if this true
Answer:	I can confirm there is no actual screen protector on the bare lcd. There is a shipping protector, but because of its application at the factory it's unusable as a screen protector. I asked elegoo directly about it or a suggestion for one and was told there isn't and won't be, because they offer a "limited" warranty on the screen itself. That limited warranty and the down time wasn't acceptable to me. I wound up snagging a tablet screen protector(not a matte finish) from walmart and overlaying it before I did anything, and it's worked fine since. Tldr, it's still a bare screen. There is a thin one on it for shipping purposes, but it's inadequate for protection uses.
Question:	Carbon filters are consumable, are you serious that we can't buy replacements? @Elegoo
Answer:	The carbon filters are absolutely replaceable. They just dont sell any specially made replacement cartidges. And you will have to open the printer to change the carbon filter. However the factory installed carbon filter will work for hundreds of printing hours if not more. Ive had my printer for about 2 months nonstop printing and have never noticed an odor
Question:	Are replacement resin tanks available? are they the same tank as the pro
Answer:	I have purchased and successfully used the 2-piece set of replacement aluminum vats found here on Amazon for both of my Mars Pro 2 printers.

Product features

ELEGOO Mars 2 Pro Mono LCD Resin 3D Printer

ELEGOO Mars 2 Pro MSLA 3D Printer is ELEGOO first 6.08 inch LCD 3D Printer that uses monochrome LCD and COB UV light source. It has 50μm XY precision and high printing speed at 1.5-2s/layer. Extra building volume can meet most of your printing needs from industrial parts to board game miniatures.

Technical Specifications

• System: EL3D-3.0.2
• Slicer Software: ChituBox
• Technology: UV Photocuring
• Layer Thickness: 0.01-0.2mm
• Printing Speed: 30-50mm/h
• Z Axis Accuracy: 0.00125mm
• XY Resolution: 0.05mm(1620*2560)
• Build Volume: 5.08in(L)*3.15in(W)*6.30in(H) 129mm(L)*80mm(W)*160mm(H)
• Light Source: UV Integrated Light (wavelength 405nm)
• Languages: Chinese English Japanese Dutch Korean French German Russian Italian Spanish Turkish Portuguese

2K Monochrome LCD

ELEGOO Mars 2 Pro MSLA 3D Printer comes with a 6.08-inch Monochrome LCD that has 2K HD resolution. It is four times longer in lifespan and two times faster in printing speed than the regular RGB LCD 3D printers, which means higher printing efficiency, more stable performance, and less maintenance.

Multi-language Interface

The new operating system now supports 13 different languages: Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, and Portuguese, which significantly facilitates worldwide users to use Mars 2 Pro more conveniently.

Built-in Active Carbon

Like Mars Pro, Mars 2 Pro keeps this function as well, so you can enjoy the same refreshing printing experience. Built-in activated carbon could absorb the fume of resin. Working together with the turbo cooling fan and silicone rubber seal, you can barely smell any irritant odor.

CNC Machined Aluminum

Mars 2 Pro is made of CNC machined aluminum from build platform to resin vat. It has a very solid build quality and high durability like a reliable workhorse that always get its work done.

COB UV LED Light Source

Excellent heat dissipation performance, high luminous maintenance rate, uniform light emission, and no spots. COB light source has proved itself to be a fantastic upgrade that ensures each printing comes out perfectly.

Chitu Box Slicer

Chitu Box has been a very helpful companion when you are using ELEGOO MSLA resin 3D printers from slicing .stl file to adding supports. With the latest 8-times anti-aliasing function, you can get a much smoother printing surface.

• 【Dual Function】Wash and Cure 2 in 1 design makes washing and curing for 3D printed models reallized in one machine. The operating process is now more efficiency with less effort to meet your different needs.
• 【Fexible Washing Mode】The models can be placed in the cleaning basket to clearn separately, or mount the build plate with models on it and wash them together, which can avoid direct contact to uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
• 【Intelligent Curing Control】Built-in 8pcs 385nm plus 8pcs 405nm UV curing lamp beads, work together with the 360-degree rotating curing turntable, which can cure the models evenly. 0.96 inch TFT LCD screen can visually display the set time and the remaining time. With automatic protection, picking up the cover in the operating state will suspend operation and emit a beeping sound. The cover can block 99.95% of ultraviolet rays to protect your vision.
• 【Ideal Compatity 】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, photon, photon s on the market, which provides you an ideal support for your 3D resin prints.
• 【Special Notes 】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be wahed with running water.

User questions & answers

Question:	Anyone experience a grind? As if the magnets disconnected when washing after about 30-45 seconds
Answer:	Not with the OEM cleaning tub. I have with the aftermarket impeller I printed for use in a larger tub, but I corrected it by doubling up on the magnet strength on the impeller. You might need to lubricate your OEM impeller with some waterproof lithium grease.
Question:	On the turning plate for UV curing, do you need to remove the brown cover that comes on it or leave it on
Answer:	The brown paper should be removed, it is there to protect the glass (plexiglass?) turning plate during shipping. It is well-adhered, but if you can get under one edge, you should be able to pull it off in one go.
Question:	Can acetone be used as the cleaning liquid in this machine
Answer:	I'm not sure, I only use the elegoo water washable resins, because I don't have to use alchohol to clean my resin prints. And it saves money with not having to buy alcohol for cleaning. From what I read about the tolerance of acetone to plastic... the container is thick enough to tolerate it. But I myself have not tested it.
Question:	Has anyone tried this product with other solutions besides ipa? would mean green cause issues
Answer:	IPA is the best, forget the You Tubers who claim Simple Green and Mean Green are better... there are not. I still have to get rid of some Simple Green I tried that barely removed resin after twice as long as the IPA.

Product features

ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine

Wash and Cure 2 in 1 design makes washing and curing for 3D printed models realized in one machine. The operating process is now more efficiency with less effort to meet your different needs.

ELEGOO Wash & Cure Machine

• Control Method: Touch button
• Rated Power: 48W
• Input Voltage: 110V/220V 50/60H
• UV Light: 385nm+405nm（8+8）
• Time Setting: 0-30mins
• Machine Size: 200mm*200mm*352mm
• Maximum Wash Volume: 125mm*85mm*160mm
• Maximum Curing Size: φ140*165mm
• Machine Net Weight: 4.8kg

Washing with Printing Platfrom

If the printed model is not removed from the build platform, please mount the build platform to the adjustable platform bracket (The height of the platform bracket can be adjusted to fit the liquid level in the bucket, up to a maximum model height of 120 mm), then hang the adjustable platform bracket on top of the pillar to start the cleaning.

Washing with Bucket

If the printed model has been removed from the build platform already, you will need to place the model in the cleaning basket (maximum model height is 160 mm) and hang the cleaning basket on top of the pillar to start cleaning the model. Models larger than 15 mm in size are available with this cleaning option. Some small models can be cleaned together in the bucket.

Intelligent Curing Control

Place the curing turntable firmly against the turntable positioning hole and place the model on the center of it. Cover the anti-UV lid which can block 99.95% of ultraviolet rays to protect your vision. Operating with the sensitive touch button and 0.96 inch TFT LCD screen, you can easily set and monitor the time. The machine will beep when the curing is done.

ELEGOO Mercury Plus 2 in 1 Washing and Curing Machine

• Faster Printing Speed: The first seller of MARS 2 3d printer. 2K Monochrome LCD brings 2 seconds per layer printing speed which is 3 times faster than Mars or Mars Pro.
• Consistent Printing and Improved part clarity: Upgraded COB structured light source offer uniform and bright light emission, ensuring uniform print quality across the entire build platform, work with 2K mono LCD can greatly improve the printing accuracy and details.
• Solidly Machine Body: ELEGOO Mars 2 3D resin printer built by CNC Machining aluminum alloy body makes it strong and durable. Even if used for a long time, it can still maintain high printing accuracy.
• Convenient and Easy to Use: ELEGOO Mars 2 comes with the latest version of CHITUBOX Slicing Software. It takes only 1 minute to slice 30Mb .stl format files while other software may spends up to 10minutes. You can start printing within 4 minutes after assembly.
• ELEGOO OFFICIAL SERVICES: We provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD. If you have any questions regarding product operation or software please feel free to contact us.

User questions & answers

Question:	Can i print to this directly from my pc or is it from an sd card only
Answer:	No have to order separate only come with the one in the pen.
Question:	is this the same as the Elegoo Mars Tabletop Edition
Answer:	No
Question:	Whats different between this mars 2 and the red mars
Answer:	No they are plastic light and cheaply made. I cut my finger on a sharp piece of plastic
Question:	Is this the same printer as the elegoo mars 2 pro printer? i'm wondering why 'pro' isn't in the description of this item
Answer:	I used a hole size bead of 2mm

Product features

ELEGOO Mars 2 Mono LCD 3D Printer

6 inch 2K Monochrome LCD

2K ultra-clear resolution makes printing details smoother and more delicate

The 2K 2560*1620 resolution monochrome LCD screen not only improves the accuracy and speed of printing, but also extends the screen life to 2000 hours.

The high light transmittance of the monochrome LCD screen and the COB UV light source improve the exposure efficiency and shorten the printing time of each layer to 2 seconds.

The MARS 2 3d printer innovatively combines 2K 2560*1620 monochrome LCD screen with high light transmittance and high-power LED light source with a COB package structure.

The time of exposure is as low as 2s per layer, and the max print speed up to 50 mm/h, making printing speed 3 time faster than Mars

ELEGOO Mars 2 Mono MSLA Resin 3D Printer

• XY Resolution: 0.05mm [2K 1620*2560]
• Printing Speed: 30-50mm/h
• Layer Thickness: 0.1-0.2mm
• Build Volume: 5.08(L)*3.15(W)*5.91(H) 129mm(L)*80mm(W)*150mm(H)
• Z Axis Accuracy: 0.00125mm
• Languages: Chinese English Japanese Dutch Korean French German Russian Italian Spanish Turkish Portuguese

6 inch 2K Monochrome LCD

ELEGOO Mars 2 apply Mono LCD with 2K 2560*1620 ultra-HD resolution makes printing details smoother and more delicate.

The 2K monochrome LCD not only improves the accuracy and speed of printing, but also extends the screen lifespan to 2000 hours(4X longer than color screen).

COB UV LED Light Source

Brand new structure design COB UV LED light brings excellent heat dissipation performance, offer uniform and bright light emission, ensuring uniform print quality across the entire build platform, work with 2K mono LCD can greatly improve the printing accuracy and speed.

Now it only needs 35s to cure the first layer, and 2s for the others.

User-friendly Design

ELEGOO Mars 2 has simple user interface design with white lines on black background.

We care the earth, remodeled resin vat made of environmentally degradable plastic, it is light yet sturdy.

The front USB port is convenient for your printing work every time.

Transparent Plastic Resin Vat

The transparent plastic resin vat helps you observe whether the bottom layer is cured successfully at the beginning of printing.

It can greatly improve the success rate of printing.

New Design Linear Guideway

Z axis utilizes BGW15CA linear guideway structure with an accuracy of 0.02mm, which eliminates riffles on final prints, producting out smooth surface and delicate testure

Chitubox Fast Slicer Software

CHITUBOX supports multiple content formats for 3D files. Mars 2 support .ctb format, which reduces the file size by an average of 90% compared to .cbddlp format and increases success rate when printing bigger models

Multi-language Interface

Mars 2 system supports 13 different languages: Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, and Portuguese.

• Air Filter: LD002R equipped with air filtering system. There is a small box at the rear of the print chamber containing a pouch of activated carbon, which can help to remove part of the stench of exposed resin from the air.
• Fast CHITUBOX Slicing Software: LD002R uses the latest version of CHITUBOX Slicing Software which gives you an extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
• Incredible Precision and Resolution: 30W Powerful UV light for fast printing, ensuring 4s per layer. LD002R also uses a 2560x1440 2K HD masking LCD.
• Anti-Aliasing: LD002R use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
• Easy to Operate: Easy to set up, easy to choose printing file and view print progress through an user-friendly 3.5'' full color touch screen. Level the platform by adjusting 4 hex screws — loosen them before dropping the plate, and it will align to the level of the screen. LD002R allows you to start printing job within 5 minutes after assembly. OFFICIAL SERVICES: Comgrow team provides you lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	The XY resolution is .075mm in the chart, but it's .045mm in the description, which is it
Answer:	I believe the .045 or .05 is in reference to the "Z" axis resolution. I forget how the "X" &"Y" resolution is calculated, but I believe its a calculation based on the masking LCD resolution.
Question:	will it resume print if loss of power? and also i did not recieve any snippers
Answer:	no you will have to completely start the print over with a complete loss of power. there are no snippers with the printer.
Question:	Anyone tried printing directly on the bed without supports? My print is getting layers in first 1mm squished. Tried leveling the plate. Doesn't help
Answer:	You're getting UV bleed through, since the first layers anchor everything to the plate your BOTTOM LAYERS will have an extended cure time that extra time allows UV to bleed through and cure resin around the open screen. It's not actually "squished" but more or less "Chonky" there is no way of fixing that if you are printing directly onto the plate except sanding it back down
Question:	What's the warranty on the products unit and lcd screen
Answer:	If you don't but it from Creality directly, they won't honor a warranty. I've had this model before and the screen cracks very easily. Went through multiple before I said enough and got a different resin printer.

Product features

Air Purification Function

LD002R equipped with dual fans for excellent ventilation, and applies activated carbon air filtration, thus able to effectively reduce the divergence of odor.

Fast CHITUBOX Slicing Software

LD002R uses the latest version of CHITUBOX Slicing Software which gives you an extraordinary user experience. CHITUBOX takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.

Convenient Resin Vat Cleaning

Special FEP release film tightened from both sides, prolonging service life. Quickly remove residuces from the resin vat with the removal of release film.

Full Touch Color Screen

User-friendly 3.5'' full color touch screen. Level the platform by adjusting 4 screws, allows you to start printing job within 5 minutes after assembly.

Large Print Volume Infinite Creativity

Large print volume 119x65x160mm enables you to finish bigger and larger prints at a time. Unlock your creativity!

Off-line Printing

Creality LD002R has an integrated computer board for printing directly from USB. You don't need to connect it to the computer while printing. Simple and fast.

All-metal Body+CNC Aluminum

All-metal integrated machine body by CNC cutting technique strengthens the frame structure reduces vibration, and prints more smoothly.

Ball Linear Rails Stable Z-axis Movement

Ball linear rails ensure Z-axis to move steadily, eliminates riffles on final prints, producting out smooth surface and delicate testure.

Easy to Leveling

LD002R only need to loosen 4 screws, then lower the Z axis to connect with the LCD screen horizontally, and then tighten the screws to start the print job.

2K HD Masking Screen

LD002R is equipped with special high-strength tempered glass and integrated into the 2k lcd screen. During the printing process, the release film is smoother and more durable, and the printing area is 119*65*160(mm).

• REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
• SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
• RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
• SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
• WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.

User questions & answers

Question:	What version is the board
Answer:	The newest version of the board is 1.1.5, it does not come with the printer though. Mine came with 1.1.4 which is very similar to the 1.1.3. Creality Sells the 1.1.5 separately right now as the Creality v1.1.5 Silent Main Board. It is $50 bucks and you might find it cheaper but it is a worthwhile upgrade. It has newer stepper drivers that make the stepper motors virtually silent. I can't hear them anymore only the fans now. The board also has thermal runaway enabled and has a boot loader preinstalled so if you wanted to switch to Vanilla Marlin or the TH3D software you could do so very easily. Installing this board and the TH3D software also made adding a BL Touch kit easy.
Question:	Will this printer print abs and petg also
Answer:	From the list of questions and answers on the product page, "Will this printer print abs and petg also? Answer: Yes, but for abs recommend getting a glass bed and an enclosure of some sort. By Cameron Moss on December 25, 2018
Question:	What is the physical footprint of this unit
Answer:	The actual base footprint itself requires a flat 12" x 12" surface, however certain parts such as the display panel overhang requiring a bit more space. A roughly 16" wide by about 20" deep space should be about right, although you will want to make sure both the back and front have an additional few inches to spare as the bed does move back and forth during operation. I mount mine on top of a 16" x 18" patio paver block for support and stability. I place the paver block over some dense foam that is cut about 1" in from the block edge (14" x 16"). This gives the printer a platform that helps contribute mass to absorb vibrations as well as offer a bid of noise reduction cause by sound transmission through the base. Placed a few inches from the back wall it also ensures the printer travel area remains clear. There is also YouTube video on using this technique if interested (not mine but I came across it after I came up with the same idea separately).
Question:	Does it come with any needed software? If so - what kind
Answer:	It does come with a very old version of Cura. The lastest version of Cura is what I am using. Just download it from https://ultimaker.com/en/products/ultimaker-cura-software/list. If all you are doing is downloading models and printing this is all you need. If you want to make your own 3D models that complicates things. There are many, many 3d modeling programs and which one to use is a very personal choice and each takes time to learn to use. Blender is free, Sketch-up is also I think. But there are commercial programs that can cost up to a couple of thousand to use. Zbrush, Studio Max, and others. This is list of most of them: https://all3dp.com/1/best-free-3d-modeling-software-3d-cad-3d-design-software/ Without a better idea what you are wanting to do, this is the best answer in a short space I can give.

Product features

Why choose Creality 3D Ender 3 Pro 3D Printer?

1. Fully Open Source: Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

2. Ideal Gift for Kids: This semi-assembled kit 3D printer is a perfect gift for kid, allow them to learn about the basic construction of 3D printers.

3. Ideal for STEM Projects: Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.

Resume Printing Function

Ender 3 Pro can resume printing after power outage or any other unexpected stoppage.

Meanwell Power Supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

Product description

Reliable Affordable Monochrome Laser Printer For Personal or Home Office Use. Automatic Duplex Printing, Compact Size, Print Speed Up To 27ppm. High Speed USB Interface. Media Type - Plain, Bond, Envelopes, Labels; Sheet Weight - Manual Feed (Min/Max) - 16-43 lbs. (bond),Sheet Weight - Paper Tray (Min/Max) - 16-28 lbs. (bond), Machine Noise (Ready/Printing) - 31dB/49dB,Power Source - AC 120V 50/60HzConsumable Type - Toner Cartridge and Drum

• Prints up To 27 ppm, automatic duplex printing
• 250 Sheet Capacity Paper Tray. A4 2-sided print speed-13. A4 standard print speed-26. Automatic 2 sided print. Recommended monthly volume-250 to 2,000 pages
• Windows 10 Compatibility: If you upgrade from Windows 7 or Windows 8.1 to Windows 10, some features of the installed drivers and software may not work correctly. Please uninstall all drivers and software in Windows 7 or Windows 8.1 before upgrading to Windows 10
• 1 year limited warranty with free phone support for the life of your machine
• This machine uses a USB connection ensuring your office runs smoothly with no complications. High Speed USB 2.0 Interface. Does not come with USB cable. Maximum Monthly Duty Cycle: 10,000 pages. Output Paper Capacity (sheets):100
• Refer the specification sheet below for contents of package and refer to the user manual for trouble shooting steps.
• Printer doesn't have Wi-Fi capability
• It prints sharp, professional black and white pages at up to 2400 x 600dpi resolution

User questions & answers

Question:	If I connect the USB cable to my wireless router, can I print wirelessly? ...Also, any problem with using it with a newer Mac
Answer:	The GP has a 1660ti graphics card installed. This laptop has an rtx 2070, a much more powerful graphics card.
Question:	Does anyone know how to reset the drum count? I havent been able to find this info online
Answer:	Technically this laptop supports up to 64 GB , if there will be a single 32GB DIMM you can place two , MSI states that it supports 2666 , 3000 also works (2666 is without XMP).
Question:	Does the printer come with toner
Answer:	Yes. Along with the 512GB NVME slot, there is a standard 2.5" HDD/SSD slot. I installed a 2TB HDD in mine with little issue.
Question:	On average how many prints will I get out of this thing
Answer:	Ultra slim 5mm - 7mm 2.5" SSD/H type drives. Recommend Ultra slim 5mm version as I've seen people with 7mm version damaged the clips of the bottom cover.

Product features

Brother HL-L2300D Compact, Personal Laser Printer

The Brother HL-L2300D personal laser printer is the reliable choice for your home or office. This desk-friendly, compact laser printer with an up to 250-sheet capacity tray connects with ease to your computer via the Hi-Speed USB 2.0 interface and prints crisp black and white documents at up to 27ppm. Automatic duplex printing helps save paper.

Features

• Fast laser printing - Helps improve your productivity with a print speed of up to 27ppm.
• Easily print two-sided documents - With manual feed slot and rear paper exit.
• High-quality output - With a print resolution up to 2400 x 600 dpi.
• Convenient paper handling - The Brother HL-L2300D personal laser printer can meet all of your printing needs via an adjustable, 250-sheet capacity paper tray that handles letter or legal size paper.
• Toner Save mode - Use Toner Save mode for your less critical business documents.
• Straight-through paper path - A manual feed slot and rear paper exit provide a straight-through paper path to ensure that all of your printed materials always look their best.

• 2-in-1 Multifunctional Design: The machine has dual functions of cleaning and curing. It makes it easier to clean and cure the printed model. It is an excellent assistant for UV LCD 3D printers. A dual-purpose machine to save more space and keep the working area clean.
• Cleaning Mode: 1. Basket cleaning: remove the model and put it into the basket for direct cleaning; 2. Hanging cleaning: directly hang the print platform on the cleaning basket or cleaning stand to clean, reducing exposure to resin. Compatible with most LCD/DLP/SLA 3D printers such as Mars series, Photon series, etc. on the market.
• Anti-UV Light Hood: One-piece molding hood, 99.95% blocking rate of 405nm wavelength UV light. The resin cleaning and curing station adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more security.
• UV Lamp Beads Upgrade Curing Mode: lamp beads add lenses, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table, the bottom reflector is added, the bottom curing has no dead corners, so that the entire model is cured more thoroughly.
• Custom Time Adjustment: 1-60min time adjustable, knob custom cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs. After cleaning and curing the model, the performance is significantly improved, helping you create a perfect model.

User questions & answers

Question:	Could you clean the resin tray in this
Answer:	Hello The ANYCUBIC resin is suitable with our Photon machine print parameter setting. If you have any questions about the machine and the resin, please contact us by the service card address and we have professional engineers to follow your help ticket within 24 hours (the holiday response will be delay and thank you kindly for your understanding). We can only guarantee the quality of prints using our resin. We are responsible for the ANYCUBIC resin problem, If you are having trouble with the third party resin we can only recommend using our resin or contacting the manufacturer of the 3rd party resin for details.
Question:	How long should I wash and cure stuff for? I can’t find a consistent source of information
Answer:	https://3dprinterwiki.info/wp-content/uploads/2017/01/Resin-MSDS-Report.pdf

Product features

ANYCUBIC UV WASH AND CURE 2.0 MACHINE

Control method: Digital tube, LED indicator, Control knob

Rated power: 25W

The input voltage: AC110/220V 50/60Hz

UV lights: 405nm

Machine size: 225mm(L) *235mm(W) *365mm(H)

Washing size: 120mm(L) *74mm(W) *165mm(H)

Curing size: 140mm(D) *165mm(H)

Weight: 3.7kg

UV Lamp Beads Upgrade

Lenses are added to the UV lamp beads, so UV light distribution is more uniform, model surface will cure more smoothly.

Rotating Curing Platform

The platform rotates 360°to ensure even and complete curing. By adding a reflector, the top of the model can be cured.

User Settings are More Concise

The time can be adjusted: 1-60 minutes.

Allows you to adjust the cleaning and curing time according to your specific needs

UV-blocking Top Cover

The use of a transparent cover can block 99.95% of ultraviolet rays and has a safety protection effect.

Closed Cleaning

The washing model is more thorough, can completely prevent the detergent from splashing, and has a more safe and protective effect.

Dual purpose: Wash and Cure

Supports model washing and curing, more productivity with less effort. Higher efficiency than other products.

After Being Washed And Cured

After cleaning and curing, the material properties of the resin are significantly improved.

• Works Out Of the Box, 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners, The rigid metal frame can minimize the shaking to improve the print quality
• Upgraded Extruder Design, Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy
• Resume Print and Sensor Detection, Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage, One click to resume from the last recorded position when suffering power outages, And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost, printing volume reaches 8.27 x 8.27 x 8.07 inches
• ANYCUBIC Ultrabase, Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print
• More Function, TFT Touch Screen, As responsive as operating on the phone, All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service

User questions & answers

Question:	what is the software for the laser control
Answer:	I think octopi is one of them
Question:	Specifications state, supported materials: pla, tpu, etc. what other filament types does it support besides pla and tpu
Answer:	You're really constrained by your max temperature which is around 260 to 275 C. Functionally, I'd keep it below 250 to avoid degrading the PTFE tubing. That temperature will allow you to print most of the common materials like petg and abs on top of what is listed.
Question:	Is the printer quiet? how does the noise level compare to other 3d printers like the prusa
Answer:	I have one of these and honestly its quieter then my CR10. I measured the sound level and it was between 49-51 decibels which is the equivalent of a quiet office and that was when it was printing and its stock no upgrades to the fans or drivers this printer is nice.
Question:	Is there any difference between this Pro version and Mega S
Answer:	The Pro version has the extra laser engraving function, a better extruder, auxiliary leveling, multi-color printing and a much better silent driver.

Product features

ANYCUBIC Mega S 3D Printer

• Technology: FDM (Fused Deposition Modeling)
• Metal Frame makes 3D Printing more stable
• High Quality Titan Extruder
• Machine Weight: ~24.3 pounds

What Can ANYCUBIC Mega S 3D Printer Bring to You?

High Precision and Stability

ANYCUBIC Mega S 3D Printer uses integrated rigid metal body, concise and generous, with tough lines, solid materials, and very stable structure, which can minimize body shaking during printing to improve the printing quality.

Larger Print Volume

Printing size: 210mm x 210mm x 205mm. Larger printing size, smaller machine volume. ANYCUBIC Mega S does its best to gather more high performance and provide more creative space.

Upgraded ANYCUBIC Ultrabase

The newly upgraded heating integrated lattice printing platform is coated with a patented microporous coating on the surface. Strong adhesion, easy to take molds, rapid and stable heating, it can be used repeatedly without any loss of performance.

High Grade Titan Extruder

ANYCUBIC Mega S 3D Printer Equipped with updated Titan extruder, the optimized combination of the classic extrusion system and straight-through V5 extrusion head, provides smooth feeding, not easy to jam, and compatible with flexible filament.

TFT Touch Screen

Mega S 3D Printer has 3.5" TFT Touch Screen, user-friendly interface, simple operation, rich functions, smooth operation, one-key switch between Chinese and English, which can provide you a different touch screen experience.

Suspended Filament Rack

Black oxidized sheet metal parts with good texture. Mega S 3D Printer adopts integrated suspension design, which is simple and beautiful. The filament feeding is smoother, and the storage and organization are more convenient than others.

Product description

Printing, scanning and faxing shouldn't require a huge printer to get the job done, and with the Pixma TR4520 you'll see how a compact office printer stands up to the bulkier printers. It is the right size which has the right features, like Wi-Fi, Auto 2 Sided printing, and an ADF for scanning and faxing. The Pixma TR4520 provides simple, productive office printing in a compact size

• With wireless connect and the Canon Print app, use your smartphone to quickly and easily set up your printer and print right from your smartphone or tablet
• With features like AirPrint, Mopria Print Service, auto power On/Off, a built in ADF, and Wi-Fi it's easy to see why Pixma printers are so simple to use
• Connectivity technology: USB. Printer technology: Inkjet
• Save 10 percentage on all ink reorders with Dash Replenishment; Upon activation your printer measures ink levels and places smart reorders when you are running low; No subscription fees; Cancel anytime
• WORKS WITH ALEXA: Ask Alexa to print your shopping list, to-do list, crosswords, coloring pages, and more; To set up, say “Alexa, discover my printer;” Alexa can also detect when ink or toner is running low and orders more when you need it. Save 10 percentage on all ink or toner smart reorders; Restrictions may apply

Product features

AirPrint (R) App.(2)

Effortlessly print images and documents from your iPad(R), iPhone(R) or iPod Touch(R).

Mopria Print Service App.(5)

Print exactly what you need, straight from your Android(TM) device.

Canon Print App.(3)

Print and scan your favorite memories from cloud-based platforms such as Facebook and Instagram.

Easy PhotoPrint Editor App.(8)

Explore your artistic side with calendars, collages, stickers and more.

Message In Print App.(10)

Embed music, animations and secret messages within your images using the Message in Print App (10).

• Resume Printing Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
• Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
• Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
• Safety Protected Power Supply: Only needs 5 minutes for hot bed to reach 110℃.
• Strict Test: Strict testing for key components before delivery and life-time technical supports available.

User questions & answers

Question:	I am looking to purchase a 3D printer as a gift for a beginner. Does anyone have any recommendations? Thank you
Answer:	My son is 15 and he handpicked this one as a gift. He doesn’t know that I’ve purchased it, but he was very adamant that this was the best one. If the recipient is very technically inclined, I think it would be a great fit. I’ve read tons of reviews and watched several on YouTube. Once it’s properly assembled ( does seem to take some time), then operation is suitable for a beginner (again, must be very technically inclined). My son did request a different type of filament that I also purchased on Amazon, because the included roll isn’t that great. I don’t remember which one I purchased, but it was about 20.00. He also suggested getting or building a table to sit it on, as you should not sit it directly on the floor. He’s making one to put beside his desk, but I’m sure any small table would do. I’m very excited myself to see it in action, but I guess I’ll have to wait until Christmas.
Question:	Does the creality ender 3 has the dual extruders like the bibo 3d printer
Answer:	No, but. You could upgrade it if you have the expertise
Question:	Hi. Purchasing for my young granddaughter. will I need to purchase anything else with the unit in order to use it christmas day
Answer:	You also need the filament sold on spools. It comes in many colors. The filament is the actual product that is used to make the 3D creation.
Question:	Seriously how difficult is the build
Answer:	It is very straightforward, but the downloadable PDF instructions leave a lot to be desired. I highly recommend using the top-rated "how to build" video, along with the PDF. Here is a link to that video: https://www.youtube.com/watch?v=me8Qrwh907Q The video contains a huge number of hints which, having now completed my first 3D print, which was 100% successful, I can now fully appreciate. The video helps you get everything square, and makes sure that many minor adjustments which were not done perfectly at the factory, are tweaked just right.

Product features

Fully Open Source

Allow users to improve their printer upon the source code and share the changes within the community, resulting in an improved experience for all.

Branded power supply

Branded power supply and high-watt hot bed ensure fast heating to the printing platform.

Resume Printing Function

Ender 3 can resume printing after power outage or any other unexpected stoppage.

Upgraded Extruder Design

Greatly reduces the risk of clogged nozzle and bad extrusion.

High Precision Printing

Allow you to print high precision models, creat your own world.

Suitable gift for kids

This semi-assembled kit 3D printer is a perfect gift for kids, allow them to learn about the basic construction of 3D printers.

Ideal for STEM Projects

Invite imagination and innovation to student, help them discover the wonders of all the STEM fields.