12 best 3d printers industrials

• The X-Max with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• 5-inch full color touchscreen with intuitive icons makes for easy operation
• Build size: 300mm x 250mm x 300mm / 11.8" x 9.8" x 11.8"
• Full metal support more stable than plastic support;Aviation aluminum, CNC machining aluminum alloy
• QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty.

User questions & answers

Question:	Does it stop if the filament runs out and wait for user to load new filament
Answer:	The printer currently does not have such function. So if the filament runs out, there will be no prompts or stop printing. Please load new filament directly to print.
Question:	Can a Filament Detector be added by user to the Xmax
Answer:	Because the machine has automemory...on power outages, I built my own filament detector. It serves two purposes: 1) It will detect the end of a filament at the sensor (basically a mechanical switch), and trip a relay which shuts down the machine; and 2) It cuts the filament in the case of a reel bind which then does (1) above. (this is done by a bend that pulls into a blade when the force is enough). Yes, it's a kludge. But when you are 10, 15, 22+ hours into a print (often overnight) and are not baby sitting it, this method has been a plastic and time saver. I am sure there are better ways, but this was a quick and dirty project after I had a spool bind up. While I normally use higher quality manufacturers, binding can and does occur, especially if the last person to swap out a roll wasn't careful and let the end loop under a wind. Those of you who have printed enough, know exactly what I am talking about.
Question:	Does this printer have filters for fumes
Answer:	There is a foam filter element over the cabinet fans. This does little more than filter the air blown into the build chamber, and is really unnecessary, for all intents and purposes. Consider it a dust filter for the inside of the printer. It has no impact on any fumes or particulates in the air escaping the printer during use..
Question:	Can it automaticlly stop if the filament runs out like bibo 3d printer
Answer:	No, it cannot. However, there is a pause and resume function, so you can replace/change filament mid-print, you just have to detect the correct time (or predict it in gcode) when the filament will be close to running out.

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces Imported 12mm axis.

Maximum print size is 11.8''x9.8''x11.8''(300(L)x250(W)x300(H)mm)

Newly Developed Extruder:

Two Sets of Qidi Tech Third Generation Extruder Assembly with Different Capability.

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament:

The first creation of the two different ways for place the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

5.0 inch Touchscreen:

5.0 inch touchscreen. Larger and user friendly interface makes it more intuitive and easy to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

Qidi Print Slicer:

The Qidi Tech latest generation slicer software version 5.0 : Redesigned UI interface of Qidi Print software is more convenient to operate. It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Qidi Print software compatible with all types of Qidi Tech 3d printers, life-time free, the alternative to paid software ( If you have the old version, please download the latest version on Qidi TechI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Max 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

• STRONG STABILITY:Integrated sheet metal body,Smooth bears and rods,High torque stepper motor,upgraded MK8 extruder,The main motherboard contained 32 bits ARM core,A4988 motor drivers,3.2 inch touch screen,Integrated heating bed,220/110V touch power switch.
• MULTI-MATERIALS:Enclosed environment,and high temperature heating bed,support PLA,ABS,PETG,HIPS,TPU,RUBBER,FLEXIBLE,WOOD,CARBON FIBER Filaments
• FILAMENT RUN OUT WARNING & RESUME PRINT:When filament run out ,it will auto pause and utter a sound,when you replace the new filament,and continue to print . The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
• REMOVE EASILY:Using magnetic bed surface for easy model removal . Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
• WARRANTY AFTER-SALES: 12 Months Warranty ,We provide original part for after sale.and will provide professional customer service within 24 hours.

User questions & answers

Question:	what Firmware does this printer use
Answer:	The board main core is Arm with 32 bits, The Firmware is similar to Reprap,we developed it,we can give it to customer for free,it is easy to use ,thanks!
Question:	what kind of material i have to buy for use this printer? can you some number
Answer:	This printer support most materials,as PLA,ABS,PETG,HIPS,carbon firber,wood ,tpu (flexible),so you can buy those what you want to print,we suggest you can print start PLA firstly,Btw we have putted one roll PLA filament into the printer,if you buy this printer,you can use it directly,thank you!
Question:	Can auto bed leveling be added
Answer:	No,it has already supported semi-bed leveling,according customer feedbacks,it is more practical and useful for users,thank you!
Question:	What are contents of the box
Answer:	In the box comes the printer completely assembled, ready to use, it comes with the USB cable to connect it, a microSSD with PDF manual, an example model ready to print, three STL files of examples, a small box containing a USB adapter -microSSD, tools and spare parts in case you need them (very useful for a beginner like me with 3D printers) and a spool of PLA filament. And most importantly, it doesn't come in the box, which is the excellent technical support they offer.

Product features

HUAFAST 3D Printer HS-Mini S with Multi-features

• Ultra high Precision
• Metal cabinet
• Color touch screen
• Closed environment
• Magnetic platform
• Power off resume
• Filament detective warning

SUPER STABILTY

laser cutting and shaping of integrated sheet metal chassis makes the machine super-stable,the prototype has been tested continuously for more than three months, and printing time exceeds 2000 hours.

VARIOUS MATERIALS

Enclosed environment system,it can printing over 10 different kinds of materials,as PLA,ABS,PETG,HIPS,Wooden,TPU,Flexible,Rubber,Carbon Fiber.

ULTRA HIGH PRECISION

Normal 0.1mm high-precision printing;

Default nozzle size:0.4mm

Type:MK8

Color touch screen

• 3.2 inch tft mks touch screen
• simple operation
• simple interface
• friendly UI
• six languages

Power off resume

When unexpected power failure occurs,the printer will automatically save the print data and record the current position,after the power is restored, the printer can resume the printing function with one click, so that the printing will not be afraid the failure.

Filement detection warning

It supports 5 points leveling

It will be more and more useful and practical for new users,intelligent leveling,easy to print,you will print awesome models quickly.

• The X-PLUS with pioneered creation of two different ways for placing the filament. Ventilative printing or enclosed constant temperature printing for you to choose when printing the different types of filament.
• The X-PLUS 3D Printer Kit comes with two different types of extruder assembly. The extruder A had already been installed on the printer. The max printing temperature is 250C, and it can works well with PLA, ABS, TPU. And for extruder B, free to you if you need. The maximum printing temperature is 300C, and can print Nylon, Carbon Fiber, PC. (The latest development, free trial).
• Double Z-axis driver, ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.
• Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).
• Backed by with One-to-one QIDI TECH service. If you have queries about 3D Printer, feel free to contact our exclusive and fast support service team, we'll reply back to you within 24 hours. Free One-year warranty is also guaranteed.

User questions & answers

Question:	Is the qidi 3d yellow banner removable? i understand branding, but it's a bit of an eyesore
Answer:	You can take it off but it will leave the glue on and it is a long process to remove.
Question:	Is the only difference between x-plus and max the bed size? i noticed the max doesn't list carbon printing - is that feature not available there
Answer:	The main differences between the X-Max and X-Plus are the build volumes (Max= 300x250x300mm vs Plus= 270x200x200mm) and the touch screen (Max=5" vs Plus= 4.3"). They both can print the same materials, including Carbon Fiber, Polycarbonate, PC/ABS, & Nylon using the Hi-Temp print head that has a hardened steel nozzle to prevent wear when using abrasive filaments. Hope that helps.
Question:	Is this a dual extruder printer like bibo 3d printer
Answer:	No, it is a single extruder. The additional extruder they include or send at customer request is an upgraded single extruder module.
Question:	How does this printer compare with the prusa i3 mk3? they are at the same price point but i would have to wait several weeks for the prusa
Answer:	The guy that sits next to me at work got the same Prusa kit. He feels like the QIDI X-Plus may out perform his. Also, my build capacity is a bit larger than his. He likes the PEI surface on the Prusa. My only mild complaint is having to exchange extruders for the over 250C range, but I think I get smoother prints with my low temp extruder that he does with the general purpose extruder on the Prusa. Also, he regrets not having an enclosure like mine has. We compare prints all day long, so after he spent an entire day and night building his & I was up and running in 10 minutes, I want to buy another one! I also got mine in 2 days & I have almost immediate answers from support 24/7, no matter how trivial. They are amazing! It took a couple of weeks to get the Prusa. He was so jealous!

Product features

Double Z-axis:

Updated the Single Z-axis to Double Z-axis, more stable and solid for large size prints.

Innovative design of double z-axis motor structure with 4 pieces imported 10MM axis.

Maximum print size is 10.6''x7.9''x7.9''(270(L) X 200(W) X 200(H)mm)

Newly Developed Extruder:

Two Sets of QIDI Third Generation Extruder Assembly with Different Capability

Extruder A : For printing general material such as PLA, ABS, TPU (Already installed on the printer).

Extruder B : For printing advanced material such as Nylon, Carbo Fiber, PC

Two Different Ways for Placing the Filament:

The pioneered creation of the two different ways for placing the Filament.

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It is compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

4.3 inch Touchscreen:

4.3- inch touch screen with large and use friendly interface. During whole process, you're well instructed on the touchscreen display, make it more intuitive, and more precise and easier to operate.

Removable Plate:

Movable extraction, curved metal plate, can be used repeatedly, it is more convenient to remove the model after printing. And meanwhile, can minimize the damages or offsets to the build plate.

The plate's front side can print normal filaments, such as PLA, ABS,TPU,PETG.

The plate's reverse side can print advanced material such as Nylon, Carbon Fiber, PC.

QIDI Print Slicer:

Latest slicer software version 5.0: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The QIDI software is compatible with all types of QIDI printer, life-time free, an alternative to paid software.(If yours is the old version, please download the latest version on QIDI official website).

QIDI TECH One-to-one Service:

If any problems with the X-Plus 3d printer, please contact Qidi Tech team and we will reply in 12 hours.

Product description

Leaving our competition a step or two behind, these new features are only available on the new FlashForge Creator Pro:

The new front door comes pre-installed, and has been re-designed to provide easier access to prints.

The new injected PC top cover comes in one solid piece, making it stronger and more effective at regulating temperature.

The new, larger platform adjusting screws have been re-engineered for easier use.

The new extruder wiring router can protect wiring from wear and tear efficiently



What’s in the box?



The Creator Pro

Dual Extruder

2x spool holders

2 spools filament(N.W.:1 kilogram per spool, material and color are randomly selected)

2x spare blue platform stickers

2x filament guide tubes

2 M3×8 screws, 3 wrenches in different sizes, 1 spare leveling knob, 2 spare Teflon tubes, 1 unclogging pin and grease in tool bag

Extruder’s accessory kit Containing turbo fan duct, 2 M3×8 screws, M3×6 screw

Power cord

USB cable

Injected PC top cover

1 x 16GB SD card (contains software ReplicatorG and FlashPrint, test sample files and operation manual)



Compatible Software: ReplicatorG, FlashPrint and Simplify3D(Please kindly noted that Simplify3D is a third party paid software, which is not included in this package.

If user want to use, please buy it by yourself)

Compatible OS: Windows, Mac OSX and Linux

Print from SD card or over USB cable

Input file type: STL, gcode, x3g Printing Build envelope: 225 x 145 x 150 mm

Build volume: About 5 liters

Layer thickness: 0.1-0.3 mm(adjustable)

Nozzle diameter: 0.4 mm

Materials : Works well with 1.75 mm ABS and PLA.



Support Contact Information

If you encounter any issues with your FlashForge purchase or have any questions, please contact the support.

• Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians
• A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches
• Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process
• Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP
• Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in]
• Please refer the user manual below for better use

User questions & answers

Question:	How fast will this print
Answer:	I'm making some 5"x5"x1/4" ABS plates. They take 90 to 120 min to print.
Question:	Does this printer have a glass bed such as bibo 3d printer's removable glass bed sold in amazon
Answer:	FlashForge does not sell glass bed but you can find it on Amazon.com sold by third party such as this one:https://www.amazon.com/Borosilicate-Glass-Upgrade-Flashforge-Creator/dp/B00XWLVKRG/ref=sr_1_7?ie=UTF8&qid=1482575678&sr=8-7&keywords=flashforge+creator+pro
Question:	I want to print chocolate moulds. Wish list: Food grade material; 7" X 10 " X 1-2 mm thick OR Polycarbonate moulds which are ussually more like 4X
Answer:	7"x10" is no go unless you print in 2 parts and glue together.4"x7" is possible in one go on this machine but your molds will give you chocolate that shows all the layers of plastic.Also polycarbonate prints will likely leech PBA into the chocolate like crazy.I recommend vacuum forming for food molds.Look up leaftechllc dot com. That guy can make vacuum molds for you for hobby prices.
Question:	Can anyone reccomment a 3D scanner? What are the things to look for in a 3D scanner? I'm looking to scan items maybe about 6" or more in size
Answer:	3D Systems sells a tethered hand scanner for about $400. It works well, if you have a systems requirement appropriate PC and don't rotate the scanner clockwise/counterwise while scanning - will lose lock on the object if you do so. Will also lose lock if you move in closer than 15 inches to the object. The slower you scan, the better the resolution, right up to fabric texture. They also make a version for an iPad.

Product features

FlashForge 3D Printer Creator Pro

Sturdy metal frame is substantially more stable than the Creator’s original wood frame.Warp-resistant 6.3mm aluminum build platform remains perfectly level under the stress of high heat.New high heat resistant metal platform supports replace plastic supports.New heavy-duty (10mm) z-axis guide rod ensures steady and precise movement. New acrylic cover encloses the chamber to insulate and protect ABS prints.New LED light illuminates the printing area.New integrated LCD screen and button board functions error-free. SD slot is repositioned for more convenient access.

• 1. [New high-definition 3.5-inch touch screen] is easy to operate and easier to use. Remote extruder --- MK8 nozzle with elaborate design, high printing accuracy and more stable printing performance. Single cable design --- Solve many lines, chaotic lines, easier to operate.
• 2. [Filament run out detection] When the consumables are almost used up, a prompt sound will be issued to maintain the use of consumables in time, which improves the printing efficiency. Automatic leveling --- one-key leveling, quick work. Save printing time.
• 3. [More functions] Two-way cooling design --- cooling fan + cooling fan, improve the cooling efficiency. Wiring motherboard box --- saves time for wiring installation, more safe and reliable. Selected high wear-resistant pulleys --- improve printing speed and service life.
• 4. [For experienced printer enthusiasts] The TRONXY X5 series 3D printer is a DIY assembly machine. Not suitable for beginners who want to print directly in a short time. Of course, if you are a DIY enthusiast or a beginner who is willing to spend a lot of time assembling and learning 3D printing, you can also choose to buy.
• 5.[After-sales service]If you encounter any problems when installing and using the 3D printer, please read the manual and contact TRONXY's professional after-sales personnel. (contact us: Your Amazon Buyer Account> Click Your Account> Your Orders> Find your order and click Contact Seller)It has a one-year warranty.Our TRONXY will provide lifetime technical support and will give you a satisfactory answer. We guarantee that under normal circumstances we will reply within 24 hours.

User questions & answers

Question:	the description says 24v 360w power supply, is that the case? if it's 12v i will needs to send it back. i only work with 24v now
Answer:	Yes, the output power is 24V 360W
Question:	what size filament does this printer use
Answer:	1.75MM filament, PLA, ABS, PETG, etc. filament
Question:	Where is this manufactured
Answer:	Hello, it is made in China, and it is currently in stock in Amazon warehouse
Question:	Print model misalignment
Answer:	The voltage is unstable. When printing the misalignment, observe whether it is a high-power electrical appliance, such as an air conditioner. When some of the electrical appliances are turned off, the printing is misaligned. If there is, the printing power supply plus voltage stabilization equipment. If not, observe whether the print misalignment occurs when the nozzle reaches the same point every time the stroke is blocked. The misalignment occurs after the nozzle is locked. Generally, the X, Y, and Z axis voltages are uneven. Adjust the X, Y, and Z axis currents on the motherboard to make it pass. The triaxial current is basically uniform.

Product features

X5SA 3D Printer Product Parameter、Advantages And Considerations：

• Print Principle: FDM (Fused deposition molding)
• Machine size: 580×645×660mm (22.83×25.39×25.98 in )
• Print size: 330×330×400mm（12.99×12.99×15.75 in）
• Print color: monochrome
• Print speed: 20-100mm/s (recommended 60mm/s)
• Machine weight: 13kg （28.66 lb）

• 1、Tronxy DIY Large Format X5SA 3D Printer Advantages:
• X5SA is a 3D printer specially developed for people who like large-size printing and DIY. Users need to install and debug by themselves. In this process, they can enjoy the fun of DIY assembly. Users can innovate and modify the appearance of X5SA according to their own ideas to satisfy users' creativity.
• （2）Square structure: The design is matched with 4 polished rods and 2 screw rods, with high stability and large space utilization, suitable for enterprises and educational institutions. High-precision printing can be easily achieved.（3）Double Z-axis design: increase the bearing capacity of the hot bed, reduce errors in printing, and print more finely.（4）360W high-quality power supply: The power supply system is stable, which further improves the stability of printing and is safer. Users can use it with confidence
• 2、Be careful before buying:
• ----Before performing automatic leveling, please make sure that the position of the adjustable sensor is not lower than the nozzle position. After some automatic leveling operations, please make sure that the difference between the data is less than 0.05mm. Don't forget to set the ZOFFSET distance. The purpose of -TRONXY 3D printer is to provide our customers with a good user experience. All 3D printers undergo strict printing tests before they leave the factory, so if there are filaments remaining in the nozzles, this is normal. Do not worry. -If it is found that the print head assembly and the print platform are shaking, they are normal after transportation. Tighten the eccentric nut, this is not a quality problem. -Don't miss the orange card reader and SD card, machine assembly manual, printing test file and slicing software included in the SD card. The attached SD card provides an electronic version of the operating instructions and a link to the installation video. After receiving the package, please check the integrity of the parts first. If any parts are missing or damaged, please contact the after-sales service email as soon as possible. If you find that the actual printing time is longer than the estimated time of the slicing software, please don't worry. This is not a quality issue. Please contact our after-sales service to update the firmware parameters. This problem is easy to solve

Product description

Junco X-Max Industrial 3D Printer

User questions & answers

Question:	Does this print with PVA
Answer:	It came preloaded on the thumb drive included with the printer. There is also a printed version in the box as well. Email them, and I am sure they will provide you the pdf.
Question:	Z axis is 300mm
Answer:	The 2K resolution(2560*1600 pixels) can support to print the model whatever you want. But I think it depends on what kind of model you want. The high-fidelity part seems not..
Question:	can I print tpu
Answer:	The filter helps, but I went ahead and set up a ventilation system as well. I found an STL file of a vent cover and cut it into 3 pieces and printed it off and then spot cured them together with some resin and a UV flashlight. I also ordered a vent fan on here. https://www.amazon.com/gp/product/B01M7S46YZ/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 I then attached a dryer hose to them and mounted the fan on a dryer vent that I have going outside through a board in my window and sealed it up. No more smell.
Question:	Can this work with any laptop or desktop
Answer:	possibly demand, if it's 300$ on the main site it's due to them having to do the extra work of not only creating but packaging and such that amazon would facilitate and deal with.

Product features

Newly Developed Extruder

A extruder : For printing general material such as PLA, ABS, TPU ( already installed on the printer).

B extruder : For printing advanced material such as Nylon, Carbo Fiber, PC.

Two Different Ways for Place the Filament

A. Place the filament outside: The filament feed more smoothly while printing PLA, TPU, PETG. It compatible with any brands of 1.75mm filament.

B. Place the filament inside: For printing advanced material such as Nylon, Carbon Fiber, PC, which requires an enclosed constant temperature printing.

Dual Z Axis

Dual lead screw Z axis design, gives much more stability and accuracy than single lead screw models sold by the competition.

Double Side Printing

A side: We can use the obverse side to print general filament such as ABS, PLA, TPU.

B side: We can use the obverse side to print advanced filament such as Nylon, PC, Carbo fiber, just as smooth like glass.

5.0 inch Touchscreen

They are one of the most common domesticated animals,along with cats,fish and turtles.

Heated, Flexible, and Removable

The removable, flexible build plate makes removing a model A breeze. Simply remove and flex it to dislodge the model.

Print Slicer

It has been changed the software's slicing algorithm and improves the print quality by 30 percent and speed by 20 percent. The Print software compatible with all types of JUNCO 3d printers, life-time free, the alternative to paid software

Clean and Neat Structure

Fully closed metal is more stable and quietly than plastic metal.

• Large printing size: Printing size 500*500*500mm, you can create a big product you want with this Creality CR-10 S5 3d printer.
• Upgraded Dual Z Axis: Feeling in control with its upgraded dual Z Axis Leading Screws; high positioning accuracy, move smoothly and print faster.
• Filament Sensor: Creality CR-10 S5 3D Printer will automatically be suspended to ensure the model can be smoothly printed when the filament runs out or disconnected.
• MK10 Technology Adopted: MK8 extruder mechanism is added to the printer, A brand-new patented the infrastructure that effectively reduces the risk of plugging and poor spillage, and can print almost all consumables on the market.
• Package List: 1 * 3D Printer Set; 1 x User Manual. Any troubles or defectiveness please contact us, we offer 12 month warranty unconditionaly and free lifetime support.

Product features

Product Highlights

• Super printing size with competitive price
• High printing accuracy can meet the industrial needs.
• Patent technology for XYZ aluminum V-slot bearing + precision roller with high positioning accuracy to make it run smoothly and get higher quality product.
• Simple design, easy to make, to avoid the cumbersome installation.
• Industrial-grade PCB can continuously print for about 200 hours (under ideal conditions), with matures printing technology and stable performance.
• Patent MK10 nozzle extrusion structure can print more printing material without blocking.
• Electronic control host was separated from the printing body, in order to meet the needs of refitting printing size to various specifications according your imagination
• CR-10-S5 has now Dual Z Lead upgraded screw kits to ensure the perfection and stability in printing leads to higher precision results.

Product description

TECHNICAL FEATURES Build volume Ø 200 x h 400 mm Heated active chamber heated up to 70°C Minimum layer height 50 micron Print speed max(*) 300 mm/s Travel speed max(*) 500 mm/s Acceleration(*) 10.000 mm/s2 Bed temperature max 120 C° Extruder / Nozzle diameter standard: WASP ZEN X Extruder with MT cartridge, nozzle 0,4 mm * All data relative to speed make reference to a Delta WASP 2040 Industrial 4.0 with WASP ZEN X Extruder 0.4 mm MATERIALS Suitable filaments Ø1.75 with “ZEN X EXTRUDER” Ø2.85 with “FLEX EXTRUDER” ASA ABS HIGH-IMPACT PS PETG POLICARBONATO PC+ABS PPS PMMA PVA PA PA carbon PLA TPU *solo con FLEX Extruder TPE *solo con FLEX Extruder POLYPROPYLENE *solo con FLEX Extruder SUITABLE TOOLS ZEN X EXTRUDER dual extruder for a single material, multicolor or multi-material prints, with end filament sensor. Nozzle diameter: 0.4 mm, 0.7 mm, 1.2 mm (filament diameter 1.75 mm) FLEX EXTRUDER direct driven extruder for flexible material down to shore 50A. Nozzle diameter: 0.4 mm (filament diameter 3 mm) SOFTWARE Operative system Windows, Mac, Linux Slicing software compatible with all slicing software (Cura – SLic3r – Simplify3D) File type .stl, .obj, .gcode INTERFACE Pendrive USB Wifi network Display TFT touch PHYSICAL DIMENSION Dimensions 49 cm x 44 cm x 87 cm (19X17X34in) Machine weight 38 kg 84lbs Dimensions for shipping with cardboard box packaging on a pallet 50 cm x 58 cm x 114 cm, weight 42 kg (20X23X45in) 93lbs SUPPLY Input 110 V `60 Hz Absorbed power WASP ZEN Extruder: 120 W max Hotbed: max 500 W Room heater: max 750 W / average 300 W TEMPERATURE Use 20-30° C Warehouse 0-30° C MECHANICS Frame and cover: aluminum, steel, polycarbonate, PU. All-metal body for a stiff and vibration free precise machine Bed: machined aluminum Movements: nylon wheels on anodized aluminum sliders, PU steel core belts, resistant to high temperature Insulation: polymer foam for thermo-acoustic insulation Motors: Stepper TECHNICAL INNOVATION Continuous Print: when the used e

• Fly By Bowden Extruder
• heated bed
• pla, abs, and almost any experimental filaments- optional clay extruder upgrade
• fastest printer in the world
• heating & cooling chamber

Product description

Specification Maximum Build Size - 228 X 200 X 300 mm Layer Thickness - 0. 05 ~ 0. 4 mm Print Head - Two Nozzle (Independent) Nozzle Diameter - 0. 4 mm Filament Diameter 1. 75 mm Material - PLA, ABS, Flexible , PVA, Open Source Filaments(Firmware update coming soon) Loading System – Full Auto Loading / Unloading Bed - Flexible Metal Bed Bed Leveling – Semi-Auto (Z Axis Is Fully Automated) Slicing SW - 3DWOX Desktop Software Available Support File Types - Stl, Ply, Obj, G-Code (Reprap), Amf Connectivity Options - Usb 3. 0 Device / 2. 0 Host, Ethernet (1G), Wi-Fi Gui - 5-Inch Full Color Touch Screen Led Lamp - Internally Installed Web Monitoring - PC, Smartphone, Tablet Filter - HEPA Filter Noise Level - Pla : 45Db(A), Abs: 40Db(A) Printer Size (W X D X H) - 490 X 466 X 573 mm Printer Weight 31Kg (68 Lb. ) Certifications Specifications Met - CE, UL (Only applies to the users who purchase 3DWOX through an authorized seller on US) 1) Product - Up to 1 year from the product purchase date 2) Parts (Nozzle, Bed) - 90 days from the product purchase date For details, please visit our official 3DWOX website. (Please Google "3DWOX" to find our website) Note: You must register your product on our website for . (Go to support & register your product) For more Information, Please follow our Twitter! Outside the US (Only applies to the users who purchased 3DWOX through an authorized seller on US) For those who purchased 3DWOX on US through international shipping and those who purchased 3DWOX on US and transported it to countries outside the US, we equally apply the excluding the shipping fee.

• ✅ ​3DWOX 2X has 2 Extruders that move independently achieving the highest efficiency possible.
• ✅ ​Open Source Filament Mode is available letting users to explore new printing possibilities. (May require firmware update)
• ✅ ​Offers HEPA filter and fully enclosed structure for user safety.
• ✅ ​3DWOX 2X prints silence. The noise level of 2X is 40dB which is equivalent to the noise level of library.
• ✅ ​Offers automatic loading and unloading of filament; Insert a cartridge and 3DWOX will do the rest.

User questions & answers

Question:	Will the Solidworks add-in work with Solidworks
Answer:	No
Question:	Does this printer use support material? Is the support material easily removed afterwards
Answer:	you want to print HOT HOT HOT temps of 250-255c even 260c if your machine can do it safely. (this will degrade your PTFE if you have a lined heatbreak in time but it will last a pretty long time then use capricon tubing it holds up to higher temps better) 25-30mm/s should be ok NO FAN treat it like ABS a cooling fan can "skin" the extrusion before it melts with your previous layer (hence your layers not sticking) it will look wonder but pull apart. 75=80c bed with pva (gluestick) should work or Garolite. glue stick like "hatchwork" pattern (tic tac toe) no idea why it makes a difference but it does :-) also nylon LOVES WATER. it will absorb it right out of the air. enough to effect print quality EVEN WHILE SITTING ON YOUR MACHINE!! that fast. so you need to DRY IT and if you have a moist environment (Humidity) you may want to put together a dry box and print FROM the dry box. if you hear snap crackly pop as its print your wet and need to dry it (or bubbles in the print etc..) 160-180 F in the oven 8 hours will dry it (be careful make sure your oven temp is reliable)
Question:	I have a dp 201 with several cartriges. does the 2x require a different cartrige for the second color? the picture makes it look that way. thanks
Answer:	Hello. This is Nylon 66.
Question:	does the 2x have automatic bed leveling
Answer:	You will need to check your 3d pen for what size it uses. This is 2.85mm, the 3d pen I have takes 1.75mm so this filament will not fit in it but your pen may be different so check the size to be sure. I have also heard that glow filaments are more abrasive so be aware that it may wear your pen nozzle out.

Product features

Build Up Together

At Sindoh, we wanted to bring out the full potential of the dual nozzle system. 3DWOX 2X’s two identical nozzles work interdependently, achieving the highest efficiency possible. The nozzles accompany each other, creating multi-color, multi-material models with precision and accuracy. The nozzles also work separately, reducing the temperature adjustment time. Experience the truly independent dual nozzle printing through 3DWOX 2X.

Printing Silence

3DWOX 2X is powerful and robust yet, the most silent Sindoh 3D printer you've ever heard. With its library noise level of 40 dB(A), you can now enjoy all kind of things, such as getting other works done, eating an ice cream or simply going to sleep without being disturbed. Let 3DWOX 2X bring peace in mind with silence.

Print Bed Revolution

Combinations of technologies give birth to brilliant Innovations. Starting from the DP200’s heating bed to DP201’s Flexible bed, we have now redefined the standards of the print bed, bringing both advantages together. Think of what can be achieved with the flexibility and heating capability merged into one metal platform. It is a revolution.

Keeping A Bests Of The Original

At Sindoh, we have always believed that 3D Printing should be easy. With 3DWOX 2X you can still enjoy the best functionalities from the original such as print monitoring, auto-loading, bed leveling and email notification. It is still amazingly simple.

Healthy Printing

3D Printers use various materials that can create dusts during printing and we came up with a dust-safe answer. 3DWOX 2X’s High Efficiency Particulate Air filters, designed to arrest very fine particles effectively, will trap the dust from the materials. Filter it out and create a particularly healthy printing atmosphere.

ISTA 6 Requirements Met*

To satisfy Amazon’s customers with excellence and reliability, we have complied with the Amazon’s high standard of its packaging system.

*Report No.: SHHL1708049745PK DATED ON: SEP. 01, 2017

Sindoh CS

Unlimited online support from our CS team. Simply ask questions and our team will do its uttermost effort to keep you updated and belated. Experience the Unmistakable with our Customer support.

Voice Guidance + Alexa Skill Now Available!

3DWOX 2X is ready to help you throughout your printing. 2X will say ‘Printing is Complete’ when the printing job is done. Should there be any errors occurring, 2X will guide users through trouble-shooting methods. Just listen to what 3DWOX 2X has to say. You will know what to do.

*You can now use the Sindoh Alexa Skill to assist you while printing. Tell Alexa to pause, resume or stop your print. Turn On/Off the light on the printer with voice command. Refer to the skills page for more details!

• 【Latest QIDI 3d Printer】 QIDI Technology's latest LCD resin 3d printer, comprehensive leading industrial design, precision manufacturing .
• 【Double Z-axis linear guide 】Shadow 5.5S adopts the highest stable structure: unique dual-rail, double-slider fixed, equipped with 4 optical axis structure, making the 3d printer more stable in the printing process, with stronger stretching force for precise printing!
• 【 Convenient to use 】Shadow5.5s is equipped with special high-strength tempered glass and integrated into the 2k lcd screen. During the printing process, the release film is smoother and more durable, and the printing area is 115*65*150. Release film: After the model is printed, the model is more convenient to leave the film.
• 【2K LCD Screen 】Shadow 5.5S is equipped with high-quality 2K lcd screen, which achieves fast curing through matrix ultraviolet light, improves printing accuracy, and thus makes printing result better.
• 【Professional after-service team】 QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty (the 2K LCD and FEP film are excluded ) .

User questions & answers

Question:	Is this an sla printer or an msla printer
Answer:	An angle head grinder and thin abrasive wheel will go through it just fine. Dip it in water if it gets too hot. Completely tape the carriage to keep out dust. (Don’t take it off.)
Question:	Can you use octoprint with it by connecting to the usb port
Answer:	Hi, M3 t nuts and hex screws are suitable
Question:	Why does this look like an exact copy of the "Junco Evolution D
Answer:	No, the is no metal additive in this PLA
Question:	Anyone know where I can get a pdf manual for this
Answer:	It’s just copper coloring, no actual copper.

Product features

Parameter

Operation :3.5-inch Color TFT Touch Screen

Connectivity: USB Pen Drive

Printer Dimension: 245mm(L)*230mm(W)*420MM(H)

Build volume: 115mm(L)*65mm(W)*150mm(H)

Light source UV-LED(wavelength 405nm)

XY Resolution 0.047mm(2560*1440)

Z axis Accuracy 0.00125mm

Suggested Layer Thickness 0.01-0.2mm

Dual z-axis linear guide

Shadow 5.5S adopts the highest stable structure: unique z-axis linear guide , double slider fixed, equipped with 4 optical axis structure,making the 3d printer more stable in the printing process, with stronger stretching force for precise printing!

2K HD masking Screen

Shadow5.5s is equipped with special high-strength tempered glass and integrated into the 2k lcd screen. During the printing process, the release film is smoother and more durable, and the printing area is 115*65*150(mm). Release film: After the model is printed, the model is more convenient to leave the film!

Professional Slicing Software

Professional Slicing Software makes the slice faster and saves the Resin.

Application Field

QIDI TECH Shadow 5.5S is widely used in Architecture，Jewelry，medicine，design and education .

Air Circulation

Dual fan for ventilation along with activated carbon air filtration to minimize resin odor during 3D print jobs.

Craftsmanship and Appearance

All-aluminum CNC machining parts with plastic alloy casing and acrylic cover show amazing aesthetic design .

Low odor-friendly material

Our newly developed materials have low odor, lightness and rigid resin properties, greatly improving the printing experience.(PS:The package has not included resin,you can extra order our resin.)

• An industrial-grade 3D printer designed for the professionals and serious prosumers in mind
• Large build volume with professional high-quality printing
• High Temperature Extruder
• Intelligent assisted bed leveling
• With an air filter device to reduce unpleasant odors and hazardous emissions

User questions & answers

Question:	Is this item gray
Answer:	If the first layer isn't close enough, then warping can happen, leaving part of your first layer weakly attached to the magnetic build surface plate,you can try to adjust the height of the bed, it helps always.
Question:	Is it a multi-filament printer? can it print pla and pva filaments at the same time? i need to be able to dissolve my internal supports
Answer:	/Duration 0:05Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:05 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } Many of our printer accessories are compatible with Ender 3 and Ender 3 Pro, and we will continue to store other special accessories.
Question:	Is this totally assembled when it arrives
Answer:	140x200mm Thickness 0.2mm
Question:	Is this the updated model that features an upgraded 300 degrees C extruder
Answer:	use isoprophyl alchohol 90% or higher, or you can use denatured alchohol, acetone is harsh but it works, use those to wash away the resin, dip in and swish around for a cpl minutes then rinse in water. if you dont then the resin sits on the print and all the details will be covered when you cure it, also that wet resin is still toxic so its not safe

Product features

High Temp. Extruder to Reach Maximum 300°C

Durable and industrial grade extruder for maximum printing of up to 300°C. Available to print varieties of filament materials, such as PA(Nylon), ASA, and PA-CF...etc.

Heated & Bigger Volume of Build Plate

Bigger build volume and heated build plate enables to produce large prints with varieties of filament materials.

Air Filtration

With an air filtration device to reduce unpleasant odors and hazardous emissions during the printing process.

Built-in HD Camera

Video Monitoring printing process with a built-in HD camera

Simple, Sturdy, and All-metal Frame Design

The sturdy metal frame increases the stability of the printer’s movement.

User-friendly 5-inch Full-color Touch Screen

5 inches full-color IPS touch screen with user-friendly interface design and multilingual. Printing models can be previewed.

• QIDI TECH S-BOX is a large-size resin 3D printer newly developed by our company. The printing and leveling structure is uniquely designed by our team, one-key leveling. Double-layer insert structure, very simple to use. The structure is made of cast aluminum one-time molding, it is more stable and better mechanical structure when printing larger models.
• S-BOX is industrially designed by a professional team. The large-format internal structure is made of aluminum CNC technology. Printing a large model can greatly improve the stability of the model during stretching, ensuring the quality of the model. The tensile structure adopts a double-line guide rail, with an industrial-grade ball screw in the middle, and the accuracy of the Z axis can reach 0.00125mm. S-BOX’s Z-axis motor is the first one which equipped with TMC2209 drive intelligent chip.
• The S-BOX light source solution adopts the third-generation matrix parallel light source with a combination of 96pcs 130-watt UV LED light sources. Equipped with a 10.1-inch high-precision screen (2K Taiwan AUO), the light is more uniform and the printing accuracy is better. It is perfectly compatible with the latest Chitu software version 1.65, which is smarter and easier to operate. Using the latest slicing format files, the slicing speed is greatly improved.
• The newly developed aluminum casting resin vat is optimized to match the latest generation of FEP film. Improved that the FEP film is excessively pulled and often damaged during printing of large-size models. The redesigned structure doubles the service life of the FEP film.
• QIDI TECH Professional Amazon after-service team,if you have any problem about our 3d printer, we will reply to you within 24 hours. Free one-year warranty (the 2K LCD and FEP film are excluded ).

User questions & answers

Question:	Does the S-Box have eithernet connection
Answer:	Not that we've found. All slicing gets saved on a USB flash drive & then plugged into the Qidi
Question:	can you print dierctly on the bedplate, or do the holes make this impossible
Answer:	print right on the bedplate, no issues except with clear resin
Question:	What all else is required in addition to this printer, to arrive at a finished product? Alcohol bath? Anything else
Answer:	alcohol bath is the first part after printing the object this is the next step you need https://www.amazon.com/gp/product/B08B1RYKQ7/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
Question:	Where does one buy replacement lcd for this unit and fep sheets
Answer:	ebay has stores that sell both amazon has the fep sheets,, just order slightly larger than the build plate, trim as necessary

Product features

10.1-inch Screen, Larger Printing Area

10.1-inch high-precision screen, more uniform light emission, better printing accuracy. The 10.1 inch 2K screen is provided by Taiwan AUO, with good stability and long life. After long-term testing in the early stage,and has been recognized by a large number of users.

Scientifically Designed Leveling Structure

The printing and leveling structure is uniquely designed by our team, one-key leveling, double-layer plug-in structure, very simple to use, the structure is made of cast aluminum at one time. When printing larger models, more stable and better mechanical structure.

Better Resin Vat Structure

Re-developed cast aluminum resin vat optimized for the latest generation of FEP film. Improved that the FEP film is excessively pulled and often damaged during printing of large-size models.

The redesigned structure doubles the service life of the FEP film.

Stronger Tensile Structure

The tensile structure adopts double-line guide rails, and the middle is equipped with industrial-grade ball screws. The accuracy of the Z axis can reach 0.00125mm.

Effectively reduce the layer pattern, improve the printing accuracy, and strengthen the stretching force.

The First Intelligent 3D Resin Printer

S-BOX is the first Z-axis motor equipped with TMC2209 drive intelligent chip, printing is super quiet and more intelligent.

The Latest Slicing Software

S-BOX is perfectly compatible with the latest Chitu software version 1.65, which is smarter and easier to operate.

Using the latest slicing format file, the slicing speed is greatly improved.

The 3rd Generation Matrix Parallel Light Source

S-BOX light source solution, using the third-generation matrix parallel light source, 96pcs of 130-watt UV LED lamp source combination. Equipped with 10.1-inch high-precision screen, (2K Taiwan AUO), with more uniform light emission and better printing accuracy.