13 best heavy duty garage shelving

• Heavy Duty Construction for Strength and Rigidity 72" H x 48" W x 24" Deep
• Weight capacity up to 4000 lbs distributed evenly over the entire unitWeight capacity up to 4000 lbs distributed evenly over the entire unit
• 5 particle board shelves
• shelves adjust every 1.5" and have a durable black finish
• Holds 800 lbs per shelf or 4000 lbs total

• Easy one-person installation with all hardware included: Installation Template helps mount holes; Bubble Level helps get perfect horizontal location. (Assembly needed DIY project - Composition of four 1'x3' shelves per tier)
• More Sturdy and Stable: the buckle design with velcros prevents the brackets from falling or bending.
• Heavy gauge steel construction provides safety loading up to 400lbs total.
• High quality screws provided. All hardwares have gone through strict tests.
• Suitable for securing to either wall studs or solid concrete wall.(Does not fit for METAL studs)

User questions & answers

Question:	Is there 1 pack 2 x
Answer:	It’s a two pack.
Question:	How tall are the brackets? Trying to figure out how much room I need below the shelf for them
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Do these work for any spacing of studs
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Just to make sure does this contain two 24"x72" shelves
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Organize Your Garage Space Perfectly

The FLEXIMOUNTS Wall Shelf is made of heavy gauge cold rolled steel. The low-profile design fit with any decoriting, gives your home more storage space. It comes with all necessary harewares, and have gone through strict tests. Selectable size options available to purchase from Fleximounts: 1'x4'; 1'x6'; 2'x4'; 2'x6'.

Product description

The Sandusky Lee ERZ772472WL3 is a standing three-shelf storage rack with welded steel frames, welded steel beams, and wire shelves to support a 1,200 lbs/Level Rated Capacity. Rated Capacity, Uniformly Distributed Load – 1,200 lbs/Level. Concentrated Load Capacity - 100 lbs/Sq Ft. This unit has steel braces on both end frames for rigidity. The wire shelves are adjustable in 3" increments to accommodate items of varying height, and the shelves have middle tie bars for support and rigidity. The frames and posts on this storage rack are designed to link together without bolts to facilitate rapid assembly or rapid adjustment of shelf height. This storage rack meets NSF International/ American National Standards Institute (NSF/ANSI) standards for food equipment.

• Standing three-shelf storage rack with welded steel end frames, welded steel beams, and wire shelves to support a 1,200-lb. capacity per shelf
• Black color
• Heavy duty coated wire deck shelving
• With 3 shelf and NSF wire
• Measures 72" height by 77" width by 24" depth

User questions & answers

Question:	Would this unit be able to handle the stress to be installed in a work truck
Answer:	That's not what it was designed for but if it is bolted down properly maybe
Question:	Is the paint finish smooth or rough
Answer:	Paint finish is rough
Question:	I’m not looking to put more of 120 lb so nothing heavy. In this scenario; is it possible to install wheels
Answer:	Wheels cannot be added to this unit.
Question:	could additonal shelves be added in addtion to the ones included
Answer:	The one buyer referred to buying extra shelves... AS A SET!! Not individual. EG: If you buy 3 sets you and put 2 together and use the 3rd for additional parts that Sandusky doesnt sell individually. Option 2 You can link 3 sets together by using 8 Uprights with All supplied shelf supports and you will then have 4 uprights extra. essentially linking 2 complete units with the shelf bracing of the third unit. this is handy when width may be tight. just another option.

Product features

Muscle Rack Heavy-Duty Wire Deck Steel Shelving

The Muscle Rack steel shelving unit provides dependable heavy-duty storage in your garage, basement, workplace, warehouse, or restaurant. It features welded steel end frames, three adjustable height steel wire shelves with center support channels, and a durable black textured finish. Each shelf adjusts in 3" increments and can support up to 1,200 lb per shelf when the weight is even distributed across each shelf.

The unit can easily be assembled following the enclosed instructions and a rubber mallet (optional, sold separately).

Assembled Size

Once assembled, this welded rack measures 77 inches wide by 24 inches deep by 72 inches in height.

Capacity

Each of the 3 wire shelves hold up to 1,200 pounds for a total capacity of 3,600 pounds when weight is evenly distributed and unit is placed on a level surface.

Open Wire Shelves

The open wire shelf design provides high visibility, increased ventilation, and dust-resistance, allowing you to safely organize and easily access any items.

Easy Expansion

Each end frame frame can be used as a common end to connect add-on units for greater storage capacity. Individual beams can be adjusted without disturbing beams in adjoining units.

Rivet-Lock Design

The shelving unit's boltless rivet-lock design allows you to quickly and easily adjust shelf height in 3 inch increments.

Product description

An Amazon Brand

• 3-shelf shelving unit on wheels for your kitchen, office, garage, and more
• Each shelf holds up to 73 pounds (evenly distributed); total static max load weight is 220 pounds and dynamic max load weight is 150 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish
• Measures 23.2 x 13.4 x 32.75 inches (LxWxH)

User questions & answers

Question:	Can you remove a shelf? Would like to add trash can at the bottom
Answer:	I would place lower shelf all the way to the bottom and set trash can on it then place other shelves where you want. This would keep shelving unit stable. If you need to leave one shelf off keep it and the plastic brackets in case you want to add later.
Question:	Can i buy one additional shelf for the unit i just purchased? it is so sturdy and i would like one more shelf for the very top. thank you
Answer:	Yes, and you can buy a bag of sleeves here for pennies. I have about 10 sets of shelves that I’ve bought here, Walmart, Aldis. The legs are all the same diameter so I’ve been able to interchange shelves to get what I want. The only issue I’ve had is the size of the shelves. Like others have said, check your measurements. If you use the shelf liners do some comparison shopping. Wide difference in price for same thing. I also found a heavy plastic shelf liner roll I can cut to fit. It has tiny parallel ridges that require cleaning with with a nap- like terry- but glasses sitting upside down can breathe so no “bad breath”. Items can be put away still damp as the ridges allow air to move. Love these wire shelves.
Question:	can the 3shelf hold a microwave
Answer:	Only a small microwave. Unit isn't really sturdy enough for larger appliances.
Question:	Are these the industrial size poles that are 1" so I can use shelves I already own
Answer:	The poles we received with the three shelf unit were only 0.75 inches in diameter. The industrial size poles are usually a 1 inch diameter, and are not compatible with the parts we received in this unit.

Product features

Open Shelf Design

Combining a clean, contemporary look with a convenient adjustable design, these shelving units offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, studio, or workshop, each wire shelf can hold up to 73 pounds (evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, removable rolling caster wheels with locking mechanism, and easy no-tool assembly.

Product description

An Amazon Brand

• 3-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 250 pounds (evenly distributed); total max load weight is 750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 23.2 x 13.4 x 30 inches (LxWxH)

User questions & answers

Question:	has anyone every used these shelves outside? will they hold up against rain, snow, and sun
Answer:	I am using mine outside as part of a gardening work area. The black coated ones do not trust and hold heavy ceramic pots full of dirt. If you are not securing to a wall, put heaviest stuff on the bottom to avoid tip over.
Question:	What is the height of the entire shelf e
Answer:	The 3 shelf unit is 30" high (less than 3'). I purchased the 4 shelf unit, which is 54" (4' 6" tall). These are very well made and very adjustable, to fit your needs. Good luck!
Question:	Can you buy an extra shelf to have a total of 4 shelfs
Answer:	I needed a 4- or 5-shelf system with the same overall dimensions of this 3-shelf system. I bought two 3-shelf systems and cannibalized 2 shelves and 8 clips from the 2nd set to make a 5-shelf system. I have one extra shelf with clips if you want it. Just pay shipping.
Question:	Can I buy 2 and stack them together
Answer:	You can stack two together (I think). You need a connector. Something like this: https://www.amazon.com/Gizhome-Diameter-Connectors-Shelving-Replacement/dp/B07JB5XD59/ -- HOWEVER, these come in different thicknesses. I'm seeing one at 1.0mm and one at 1.2mm, both saying "for 3/4 inch poles". I'm gonna order it and see if it works.

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 250 pounds (total capacity 750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

• STRONG & STURDY: Wall mounting brackets included for added strength and safety. Each shelf holds up to 200 lbs. when mounted.
• STABLE: Feet height can be adjusted for added stability on uneven surfaces
• EASY ASSEMBLY: No tools required to assemble
• SPACE SAVER: Maximize garage, home, or shed space with 4 tiers of storage
• TRUE HEAVY DUTY: This product is almost twice as heavy as other plastic shelving units. What you get is a 30 lb solid structure shelving unit holding 30% more weight than other plastic shelving units
• MADE IN USA: Engineered with fully sustainable recycled material. Shelf outside dimensions: 20”D x 48”W x 55”H

User questions & answers

Question:	What is the length between the bars
Answer:	Good question. 42 inches.
Question:	is it possible to add casters to the unit
Answer:	I’m not sure if they have that as an option, but I think if I needed to I could work it out.
Question:	how much does unit weigh in box
Answer:	About this item STRONG & STURDY: Wall mounting brackets included for added strength and safety. Each shelf holds up to 200 lbs. when mounted. STABLE: Feet height can be adjusted for added stability on uneven surfaces EASY ASSEMBLY: No tools required to assemble SPACE SAVER: Maximize garage, home, or shed space with 4 tiers of storage TRUE HEAVY DUTY: This product is almost twice as heavy as other plastic shelving units. What you get is a 30 lb solid structure shelving unit holding 30% more weight than other plastic shelving units MADE IN USA: Engineered with fully sustainable recycled material. Shelf outside dimensions: 20”D x 48”W x 55”H
Question:	Please provide assembly instructions
Answer:	There were no real instructions. There were some 'feet' that took the shelf off the ground, the uprights and the caps on the top. I used a hammer and a knife to take some of the tags off some of the pieces so they would fit. I had to use a little trial and error to put it together. Good Luck!

Product description

Store and Organize your items with this Steel Shelving unit. This Black Steel Shelving unit features a Z beam construction for added strength and rigidity, so that these shelves will be able to handle lots of weight. The five selves are made of particle board and are specifically designed to support heavy loads. These shelves can also be adjusted every 1.5" so you can assemble and adjust the 5-shelf Edsal Heavy Duty Shelving to fit your every need. This shelving storage unit can hold up to 4000 lbs as long as the weight is distributed evenly over the entire unit. This unit is ideal for storing tools and other heavy equipment in the garage, tool shed or even your greenhouse. Dimensions 72" H x 48" Width x 24" Depth

• Heavy Duty Construction for Strength and Rigidity 72" H x 48" W x 24" Deep
• Weight capacity up to 4000 lbs distributed evenly over the entire unit
• 5 particle board shelves
• shelves adjust every 1.5" and have a durable black finish
• Holds 800 lbs per shelf or 4000 lbs total

User questions & answers

Question:	What is the max weight and what is the model number of this item
Answer:	I have a 454 truck engine and 2 transmissions sitting on one of them plus various other parts and it shows no sign of any problems holding them up.
Question:	Is there any way to purchase extra shelves individually
Answer:	I have not seen the manufacturer offer extra shelves
Question:	Can these be used as 2 shorter shelving units for a total of 4 short ones
Answer:	They can be set up as 2 shelving units.
Question:	Where is the description for this item
Answer:	On amazon prime

Product description

✈Specifications:





✈Material: Steel + MDF Boards





✈The Size of MDF Boards: 43.6 x 23.5 x 0.3” (L x W x Thickness)





✈Overall Size: 44 x 23.6 x 59” (L x W x H)





✈G.W.: 66lb





✈Max. Load Bearing (Each Layer): 706lb





✈Color: Black Frames





✈Notes:





1. Do not place anything overweight or step on the shelf!





2. To ensure stability, please do not place massive items on the upper layers.





3. Please allow 0.4-0.8" error due to manual measurement.





✈Package Included:





1 x 4-Tier Storage Shelf





1 x Instruction

• Overall Size: 44 x 23.6 x 59” (L x W x H)
• Max. Load Bearing (Each Layer): 706lb
• Stable steel structure: The display rack is durable and sturdy enough thanks to the solid structure and good materials. It can hold up to 706lb per tier. Its steel frame holds the MDF board more firmly.
• Adjustable & dividable: This shelf has four tiers and the height of each tier can be adjusted to meet your different needs. A storage rack can be split into several small racks for various uses.
• Easy to build & boltless construction: It is hassle-free to install the storage shelves. You just need to connect the beams using the included steel connection pieces without bolts. All of the necessary mountings and instruction are accompanied.

User questions & answers

Question:	The long cross member has an angled corner & a square one, which way is up
Answer:	It is hassle-free to install the storage shelves. You just need to connect the beams using the included steel connection pieces without bolts. All of the necessary mountings and instruction are accompanied.

Product description

Perfect for organizing your garage or workshop. Muscle Rack's Steel Shelving Unit measures 48 in. tall, 48 in. wide and 18 in. deep. The three adjustable wire shelves provide ample storage space to accommodate a variety of heavy items, each shelf supporting up to 1200 lbs. This unit is constructed with steel in a powder-coated finish for durability and strength.

• Heavy-duty steel construction with red, powder-coated finish for lasting durability
• 3 wire shelves provide ample storage for heavy or bulky items such as paint cans, tools, work equipment and more
• Shelves adjust in 3 in. increments to fit any storage needs
• Each shelf supports up to 1200 lbs. when the weight is evenly distributed

User questions & answers

Question:	does this item have dimensions
Answer:	Our dimensions are in the part number. 48 x 18 x 48
Question:	is the top shelfs usable space 48” X 18”? For example: would a 48” X 18” glass aquarium sit flush on the top shelf
Answer:	I’m doing the same thing with a 40 gallon long and it’s sitting a little over just get a piece of wood to play it safe ! I wanted to do 3 but it only works for two tanks
Question:	What color is this rack, I am seeing different answers, I would like the black/grey
Answer:	The 0909 at the end of the part number tells me it is black.
Question:	can you add another unit on top
Answer:	No way to attach.

Product description

MonsterRax introduces our newest line of heavy-duty garage organization products. This garage shelf measures 24" Deep x 92" Wide x 84" Tall. Get organized today with our bolted shelving. Assembly is quick and easy.



This shelf unit holds an incredible amount of weight. De-clutter and make room for your cars and bikes. The heavy-duty steel, wire decks and powder-coat finish are built to withstand all of your household demands. Our price includes free delivery to any location in the lower 48 states.



Shipping and Processing: All products are shipped via FedEx Home Delivery Tuesday thru Saturday. Please allow 3-4 business days to assemble and process your order prior to shipping.



Return/Refund Policy: Returns are costly. If you purchase a product where the cost of shipping is included in the purchase price (i.e. Free Shipping) and you subsequently return the product, we will refund your payment less the actual cost of outbound shipping. Customers are responsible for paying all outbound and return shipping costs. MonsterRax will not provide a return label for any cosmetic issues, like scratches and dents.

• Sturdy, Heavy Duty Steel Construction
• NO Flimsy Particle Board | Wire Shelving Units
• Heat-Treated, Case Hardened Bolts Make Shelves More Durable Than Riveted Shelving
• 24" Depth, 92" Width, 84" Height
• Patent Pending

User questions & answers

Question:	Can I lower the racks? The top rack wouldn’t allow me to put anything on it if it needs to be that high
Answer:	Yes. I lowered the top shelf based on what I wanted to put on the top one. I measured the storage bins I used and adjusted all of the shelves based on what I was storing before I put the shelves together. Nothing to it. Enjoy.
Question:	Is this unit grey or black
Answer:	This particular unit is grey
Question:	How to assemble this rack
Answer:	Hello, To assemble this product, please follow the handy installation guide that comes in the 2'x4' box containing the wire decking. The installation instructions can also be found in pdf form on our website and on Amazon. For any additional assistance, please contact our customer support division who would be happy to assist. Best Regards, SafeRacks
Question:	What is the shipping weight of this shelving
Answer:	I don't remember that, but they were pretty heavy.

• Sturdy and Durable Material: This garage shelves feature anti-rust galvanized steel structure to ensure a long use life. Middle supporting beam on each tier holds the MDF board more firmly for extra steady. One shelf holds up to 386 lbs(evenly distributed and on a level surface)
• Adjustable and Versatile Use: The Shelf levels adjust at every 1.6” increments to fit a variety of items, and you can be build as a shelving unit or horizontal as a workbench.
• Space Saving: The five tiers design can enlarge your storage space horizontally and vertically at your places to keep your home neat, tidy and organized, and to offer ultimate convenience in household organization. It is ideal for kitchen, living room, garage, workshops, warehouse, balcony and office storage use.
• Rubber Feet Skid Resistance: It features with rubber feet for added stability and also can avoid causing damage to the ground and floor.
• Boltless Design for Easy to Assemble: No bolt and no nut design for easily assemble and disassemble, a rubber mallet recommended for assembly (rubber mallet not included, include a pair of glove. Be sure to wear gloves before installation).

User questions & answers

Question:	How do you put it together in the workbench configuration? Are the uprights in 2 pieces
Answer:	Yes the upright are in 2 pieces
Question:	what if I want 1-2 boards for each shelf unit? Can seller provide extra boards for assembling
Answer:	Sorry, we don't sell replacement parts separately.Therefore, we can't provide extra boards for assembling.
Question:	How can I get replacement pieces for this
Answer:	Kindly click the button of the "Ask a questions" on our store homepage and we will get back to you with a satisfying solution.
Question:	What are the dimensions of the unit as shown? L, W, H is given
Answer:	For this item,the dimension (Each Rack) is: 35.4 x 15.7 x 71'' (LxWxH).Hope this can help u.

• 【Metal Storage Rack】- The goods racks are built by the galvanized metal frame and durable MDF boards. The metal frame has been powder coated to give it the special look. The 5-tier rack has a load capacity of 330lb per tier (evenly distributed). Overall size：82.8 x 12 x 59 inch (L x W x H), each of shelf size is 27.6 x 12 x 59 inch (L x W x H).
• 【Height Adjustable Shelf】 - The height of each tier is adjustable to meet your different storage needs. There are many positions with the same spacing on the columns. You can snap the boards in for ideal height.
• 【Boltless Design for Easy Assembly & Disassembly】- Due to the boltless design, it is easy to build this metal-frame storage rack. A rubber mallet is recommended for assembly. It can be disassembled to save more space and for convenient transport.
• 【Protective Rubber Pads】- These black goods organizers are equipped with rubber footpads at the bottom of the legs. These pads effectively protect the floor from being scratched. The footpads also add extra stability and avoid the rack sliding accidentally.
• 【Widely Used】- Combining simplicity with practicability, this boltless storage unit is suitable for storing and displaying in many situations, such as in the kitchen, garage, office, supermarket, warehouse, convenience store, etc.

Product features

5 Tiers Boltless Storage Shelf Rivet Rack

Please note:

1. Package includes 3 pack of 5 tier Shelving Unit and they are separated.

2. Pls pay attention to the actual size of the shelves and make sure it fits for what you are looking for before placing the order.

3. We recommended that you use the product in dry and ventilated places, and use cotton clothes to wipe the dirt on the surface.

4. A rubber mallet is recommended for assembly. The rubber mallet is not included. Thanks for your understanding!

MATERIALS

Iron frame with powder coated & MDF Boards

SIZE

Overall Size: 82.8 x 11.8 x 59.1" (WxDxH), each of shelf size is 27.6 x 11.8 x 59.1" (WxDxH).

It has a load capacity of 330lbs per shelf (evenly distributed)

ANTI-RUST

Heavy duty steel frame and has been powder coated to give it the extra special look.

DESIGH

Product has a boltless design, so it does not require any hardware for Slotted construction

ASSEMBLED

The shelves can be assembled as your request as the picture show.

HEIGHT-ADJUSTABLE

The height of each tier is adjustable to meet your different storage needs.

Adjustable shelf levels at every 1.6".

MDF BOARDS

It comes complete with cut-to-size 8mm chipboards.

BOLTLESS DESIGN

Due to the boltless design, it is easy to build this metal-frame storage rack.

STURDY STEEL FRAME

Rubber feet for stability & floor protection.