13 best basement storage racks

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

An Amazon Brand

• 3-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 250 pounds (evenly distributed); total max load weight is 750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 23.2 x 13.4 x 30 inches (LxWxH)

User questions & answers

Question:	has anyone every used these shelves outside? will they hold up against rain, snow, and sun
Answer:	I am using mine outside as part of a gardening work area. The black coated ones do not trust and hold heavy ceramic pots full of dirt. If you are not securing to a wall, put heaviest stuff on the bottom to avoid tip over.
Question:	What is the height of the entire shelf e
Answer:	The 3 shelf unit is 30" high (less than 3'). I purchased the 4 shelf unit, which is 54" (4' 6" tall). These are very well made and very adjustable, to fit your needs. Good luck!
Question:	Can you buy an extra shelf to have a total of 4 shelfs
Answer:	I needed a 4- or 5-shelf system with the same overall dimensions of this 3-shelf system. I bought two 3-shelf systems and cannibalized 2 shelves and 8 clips from the 2nd set to make a 5-shelf system. I have one extra shelf with clips if you want it. Just pay shipping.
Question:	Can I buy 2 and stack them together
Answer:	You can stack two together (I think). You need a connector. Something like this: https://www.amazon.com/Gizhome-Diameter-Connectors-Shelving-Replacement/dp/B07JB5XD59/ -- HOWEVER, these come in different thicknesses. I'm seeing one at 1.0mm and one at 1.2mm, both saying "for 3/4 inch poles". I'm gonna order it and see if it works.

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 250 pounds (total capacity 750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

Color：Black

STORAGE SHELF UNIT 6 TIER METAL RACK ADJUSTABLE STEEL WIRE SHELVES HEAVY DUTY WITH WHEELS

 

☀Attractive Appearance:

Metal rack conforms to modern aesthetic,steel wire made a classical shape.

Wire shelving unit with the black color make itself neat and easy to clean.

The black storage shelf makes your place simple and well-furnished.

 

☀Adjustable Shelves:

Storage shelf’s layer can be set at any height for your individual needs.

Metal Rack could accommodate a variety of items.

Wire Shelving Unit have helped in organizing garage, kitchen, office and so on.

 

☀Excellent quality:

The steel wire of the storage shelf is very durable, so it can hold a lot of things.

The total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers.

Weight limit of each Wire Shelving is 350 pounds when equally distributed on feet levelers.

Maximum entire unit weight capacity is 500lbs when equally distributed on casters.

Dimensions: 48"L x 18"W x78"H (With stationary feet)

Dimensions: 48"L x 18"W x82"H (With Wheels)

storage shelf metal rack wire shelving unit wire shelves heavy duty with wheels 6 tier overall garage layer shelf for pantry kitchen black overall organizer unit durable steel wire layer shelf unit multipurpose unit wheel chrome adjustable shed

 

• ♛【Easy to Assemble】: No assembly tool is needed, it can be assembled freely, metal storage rack and the height of each layer can be adjusted, which can be adjusted to the height or level you want, the operation is very simple. Storage shelf metal rack wire unit
• ♛【Broad Usage】The super storage function metal storage rack can be placed in kitchens, bathrooms, rooms, living rooms, warehouses, offices, industrial, commercial exhibitions, hotels, supermarkets, etc. Metal shelf unit storage rack wire
• ♛【Extremely Durable】Made of heavy steel, it has excellent rust resistance and oxidation resistance. Storage rack the weight limit of each shelf is 350 pounds, and the total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers. Wire unit rack shelf metal storage.
• ♛【Convenient Wheel】The wheels of the shelves are equipped with fixed locks that can be fixed or moved at any time. For example, you can unlock when you need to push the metal storage rack clean or push it into a sunny place. If you want to secure the heavy metal shelf in place, you can lock the lock. Rack wire shelf storage unit metal
• ♛【What You Will Got】We guarantee that you will like this metal storage rack. If you are not satisfied with this storage rack, please contact us! If you have any questions, please feel free to ask! Perfect Christmas and Thanksgiving gift for your friends and relatives.

Product features

Durable and Sturdy

This shelf unit is very durable and sturdy, it can hold 350 lbs per shelf when equally distributed on feet levers, and the weight limit of each per shelf with wheels is 220 pounds. It’s very stable that you can put things on it and needn’t worry about it may be shake.

Commercial Wheels

Casters are very sturdy and high quality, easy to move it allow for easy positioning in the kitchen, garage, or office.

Modern Appearance

Stylish six-shelf shelving unit offers the best of both rugged reliability and modern appeal and the smooth surface makes it easy to clean.

Heavy Steel Pipe

Constructed of durable steel with a classical black finish, the heavy steel pipe can hold on many things.

Adjustable-Height shelves

Raise the shelf and move all four sleeves to a new position for more or less height, as desired, meet your different needs.

Adjustable feet

Adjustable leveling feet allow the unit to be placed on uneven ground--a simple twist is all it takes to stabilize.

High Bearing Capacity

The dimension of the each per shelf unit is 48"L x 18"W, so it big enough for you to put lots of things to store.

• Heavy Duty Construction for Strength and Rigidity 72" H x 48" W x 24" Deep
• Weight capacity up to 4000 lbs distributed evenly over the entire unitWeight capacity up to 4000 lbs distributed evenly over the entire unit
• 5 particle board shelves
• shelves adjust every 1.5" and have a durable black finish
• Holds 800 lbs per shelf or 4000 lbs total

Product description

The Sandusky Lee ERZ772472WL3 is a standing three-shelf storage rack with welded steel frames, welded steel beams, and wire shelves to support a 1,200 lbs/Level Rated Capacity. Rated Capacity, Uniformly Distributed Load – 1,200 lbs/Level. Concentrated Load Capacity - 100 lbs/Sq Ft. This unit has steel braces on both end frames for rigidity. The wire shelves are adjustable in 3" increments to accommodate items of varying height, and the shelves have middle tie bars for support and rigidity. The frames and posts on this storage rack are designed to link together without bolts to facilitate rapid assembly or rapid adjustment of shelf height. This storage rack meets NSF International/ American National Standards Institute (NSF/ANSI) standards for food equipment.

• Standing three-shelf storage rack with welded steel end frames, welded steel beams, and wire shelves to support a 1,200-lb. capacity per shelf
• Black color
• Heavy duty coated wire deck shelving
• With 3 shelf and NSF wire
• Measures 72" height by 77" width by 24" depth

User questions & answers

Question:	Would this unit be able to handle the stress to be installed in a work truck
Answer:	That's not what it was designed for but if it is bolted down properly maybe
Question:	Is the paint finish smooth or rough
Answer:	Paint finish is rough
Question:	I’m not looking to put more of 120 lb so nothing heavy. In this scenario; is it possible to install wheels
Answer:	Wheels cannot be added to this unit.
Question:	could additonal shelves be added in addtion to the ones included
Answer:	The one buyer referred to buying extra shelves... AS A SET!! Not individual. EG: If you buy 3 sets you and put 2 together and use the 3rd for additional parts that Sandusky doesnt sell individually. Option 2 You can link 3 sets together by using 8 Uprights with All supplied shelf supports and you will then have 4 uprights extra. essentially linking 2 complete units with the shelf bracing of the third unit. this is handy when width may be tight. just another option.

Product features

Muscle Rack Heavy-Duty Wire Deck Steel Shelving

The Muscle Rack steel shelving unit provides dependable heavy-duty storage in your garage, basement, workplace, warehouse, or restaurant. It features welded steel end frames, three adjustable height steel wire shelves with center support channels, and a durable black textured finish. Each shelf adjusts in 3" increments and can support up to 1,200 lb per shelf when the weight is even distributed across each shelf.

The unit can easily be assembled following the enclosed instructions and a rubber mallet (optional, sold separately).

Assembled Size

Once assembled, this welded rack measures 77 inches wide by 24 inches deep by 72 inches in height.

Capacity

Each of the 3 wire shelves hold up to 1,200 pounds for a total capacity of 3,600 pounds when weight is evenly distributed and unit is placed on a level surface.

Open Wire Shelves

The open wire shelf design provides high visibility, increased ventilation, and dust-resistance, allowing you to safely organize and easily access any items.

Easy Expansion

Each end frame frame can be used as a common end to connect add-on units for greater storage capacity. Individual beams can be adjusted without disturbing beams in adjoining units.

Rivet-Lock Design

The shelving unit's boltless rivet-lock design allows you to quickly and easily adjust shelf height in 3 inch increments.

Product description

The 5 shelf unit provides ventilated shelves along with rugged tubular construction that helps keep items dry, reduce odors and prevent mildew and is designed for heavy-duty usage. Additionally, Sterilite 25 quart or 50 quart shelf totes fit perfectly on these shelves to create the ultimate storage solution. The shelving unit can be assembled quickly, without the need for tools.

• Outside Dimensions: 75.13 x 36 x 18
• Includes 1 5-Shelf Unit
• Made in the USA
• Rugged tubular construction
• Designed for heavy-duty usage

User questions & answers

Question:	looking for kitchen appliance storage; easy to assemble; does this fit the bill
Answer:	Yes.ðŸ~Š Easy to assemble.
Question:	Can I store kitchen plates, breadmachine, glasses on it
Answer:	Yepper on storage but becareful of the glasses
Question:	I wanted to use these for totes. What is the max tote size
Answer:	According to my measurements the largest it will hold is about 14" high by 22" long by 14" wide. You should be able to get two on each shelf. I have varying sizes right now, but these dimensions are the largest I am using. The length for mine are 24" and they just stick out a little in front. They are extrenely sturdy so far.
Question:	Do the plastic shelves sag over time
Answer:	I have had one for over ten years. As an artist, I have put a lot of sketchbooks, big drawing pad and papers...easily over 200 pounds. They will sag and bow after a while if you put heavier stuff on the shelves.

Product features

Sterilit 5-Shelf Unit

~ Dimensions: 75 1/8" H x 36" W 18"D.

~ Flat Gray shelves & legs.

~ Pack of 1.

~ Rugged tubular construction & ventilated shelves.

~ Accommodates 25 Quart or 50 Quart Shelf Totes.

Product description

Looking to make the most of your garage? This shelving unit is just the thing to help you clear up tools, equipment.  Each shelf can hold up to 350 lbs of weight, making this piece great for organizing even the big stuff. 

Size: 48" W x18 D x72 H (with stationary feet) 48" W x18 D x76H (with wheels)

🚀 Delivery Time: 3-5 days

➤Our Guarantee

➊ We are fast delivery and guarantee that our customers receive our products within 3-5 days. 

➋ If item was damaged during transportation, please contact us! we will sent replacement parts free of charge in few days.

❣【Broad Usage】

☀【garage / sheds / basement / industrial warehouse】

☀【restaurant / kitchen / pantry】

☀【laundry room / open loft / storage room】 

☀【office / studio / craft room / hydroponic stuff or plant】

Features:

▶ Metal rack could accommodate a variety of items.

▶ Storage shelf’s layer can be set at any height for your individual needs.

▶ Wire shelving Unit have helped in organizing garage, kitchen, office and so on.

Multipurpose 6 Tier Wire Shelving

--The total weight limit of the whole shelf is 2100 pounds when equally distributed on feet levelers.

--Weight limit of each Wire Shelving is 350 pounds when equally distributed on feet levelers.

--Maximum entire unit weight capacity is 500lbs when equally distributed on casters.

Specifications:

NOTE:DO NOT MOVE while loaded.

Dimensions: 48"L x 18"W x78"H (With stationary feet)

Dimensions: 48"L x 18"W x82"H (With Wheels)

The steel wire of the storage shelf is very durable, so it can hold a lot of things.

• 【Dimensions-Material-Capacity]: 48" W x 18" D x 82" H （w/wheels）chrome shelving made of rustproof and oxidation resistance steel construction, resist dirt buildup and corrosion. Huge capacity hold a ton of stuff and a lot of weight, the per unit weight capacity on feet levelers is 350lbs (no casters), But max entire unit weight capacity is 500lbs on wheels(w/casters) ; 🔔 Note that the limit on the weight it will hold depends on if you are using the casters or not, and it is a big difference.
• 【NSF Adjustable Wire Shelving Unit】You can adjust the height of the storage shelves according to the size of the item. uses a slip-sleeve locking system, You can adjust the height of the storage shelves according to the size of the item.Each layer of this metal shelf can be adjusted. wire shelving unit adjustable in 1" increments.storage shelves metal shelf wire shelving unit.
• 【Easy to Assemble】- Our chrome unit easy to assemble and you need no tools. you can plan out the spacing and marked on the shelf to make it line up with the marks on the posts to ensure the rack balance. Please attention to the orientation of the black unit clips (thin edge up), sliding shelf down into place where they snap together. But it's helpful to have an extra person, due to the weight and bulk. PS: It's easier to assemble horizontally on the floor and then lifting unit to stand.
• 【Heavy Casters Roll Effortlessly】-The heavy duty shelving wheels with ball bearing swivels and locking brakes on two wheels. it's easy to lock and unlock, this makes it easy to rearrange and move your shelves even when loaded.when you want to re-organize your garage with the wheels you just roll the shelf so you can clean the floor and walls.If you want to secure the heavy metal NSF wire shelf rack in place, you can lock it. you can using mobile Rack in different areas as time goes by.
• 【Our Guarantee】- ➊ We are fast delivery and guarantee that our customers receive our products within 3-5 days. ➋ If item was damaged during transportation, please contact us! we will sent replacement parts free of charge in few days.If you are not satisfied with this storage rack, please feel free to ask! Unit rack storage shelf metal wire.

User questions & answers

Question:	once the shelves have been Put in place can they be readjusted
Answer:	Yes. They can be easily adjusted. Tap the shelf corners upward and shelf will come loose. Readjust the two half clam shells on each corner to new height position. Then tap the shelf down.
Question:	How much space is between the shelves
Answer:	You can set them at any Heights U Want you can have them three inches apart are you going to have them 24 inches apart the inserts that go with holding the Shelf up it's how you said it they put together and then you slide the shelving unit on down the pole I've got some mind set at 13 inches holding poly containers and some I've got set at 34 inches
Question:	Is the size of the poles compatible to others like U-Line? We want to get additional shelves
Answer:	I don't know What a U-Line is . But the shelves I bought holed a heavy load. I really like the rack. If you give me the measurements I will measure mine.
Question:	I bought this a few years ago and now need more shelves. Can I buy more shelves for this unit
Answer:	I wanted to do the same thing. After doing some research, I concluded that buying a complete unit and using only the shelves would be much more cost effective.

Product features

Outstanding Weight Capacity

Each shelf of the wire shelving can hold 350 lbs with feet levelers when weight equally distributed, total 2100 lbs with feet levelers. The whole metal rack can hold 500 lbs if assembled with 3" caster.

Smooth Edges

The shelf is made with great craftsmanship so that no burrs will hurt your hands. Every weld is tested. The coating surface is smooth and easy to clean.

Rust Resistant Surface

The surface of the shelf is chrome plated that is not easy to rust in water, and can be wiped with dry cloth. So, it saves time and manpower.

Simple Installation

No tools needed to assemble this wire shelving, assembly instruction included. The wire shelf installation can be finished within 15 minutes. Awesome metal rack it is.

High Density Steel Material

The wire shelf is made of high density steel and is NSF listed, with 2 years warranty. The advantage of large capacity is worth your choice.

Two Options

Casters can be installed at the bottom of the shelf, as well as fixed screws blocks. So you can switch as needed, just unscrew them.

Adjustable Lock

The height of each shelf can be adjusted according to the different items you put, which is very convenient for your storage.

Suitable for Various Places

Our shelves can be placed in varieties of places such as kitchen, living room, bedroom, garage, office and etc.

Product description

Maximize storage in the garage or any room of the house with this heavy-duty 5-tier shelving unit that can hold up to 200 pounds per shelf. The ability to adjust the shelving heights is convenient for when shelving needs change or oddly-sized items arrive. Commercial-grade certification makes this the perfect kitchen, garage or closet shelving unit. Your shelving needs to keep up with you – we make sure it does.

From the Manufacturer

Honey-Can-Do SHF-01443 5-tier Shelving Holds 200-Pounds Per Shelf, 72-Inch, Chrome Have a need for heavy-duty shelving? Honey-Can-Do is here to help! This unit has fully adjustable shelves to accommodate items of any size or shape. It is built with heavy duty steel frame and features contemporary grid patterned shelves. The industrial quality black powder coat steel is sturdy and rust resistant. The shelves are rated to support 200lb. of evenly distributed weight- more than enough for all your heavy duty storage needs! Use with linens, dishes, electronics, books, clothing. Get more than one to create a whole storage wall. The no-tool assembly allows you to construct in minutes a shelving unit that will last for years. Dimensions are 13.8"W x 35.9" x 72"H. With stringent quality control methods, Honey-Can-Do confidently offers a limited lifetime warranty on every product they make.

• 0% Fabric
• Imported
• You love the versatility of shelving, if your shelving is versatile, that is. Well, it most certainly is with the heavy-duty 5-Tier Shelving Unit in Chrome. Maximize storage in the garage or any room of the house with this durable unit that can hold up to 800 pounds per shelf. Adjustable shelving heights is convenient for when shelving needs change or oddly-sized items arrive, like the large aqua deer statue that he just “had to have” from his last guys’ trip... hint, it’s going in the garage. Commercial-grade certification makes this the perfect kitchen, garage or closet shelving unit. Your shelving needs to keep up with you – we make sure it does.
• 200-pound capacity per shelf
• Brings garage, basement or kitchen storage ideas to life
• Adjustable shelf heights provide configuration versatility
• Heavy-duty wheels make it easy to move

Product features

5-Tier Adjustable Shelving Unit, Black

Shelving needs to be adaptable because, let's face it, your storage needs are not one-size-fits-all.

This black adjustable shelving unit allows you to customize the heights of each of your shelves, which hold up to 200 lbs each. And its versatility allows you to get organized in your kitchen, your garage, your basement... really anywhere.

White, Black and Chrome options

Customize sizes for your space

Varying weight capacities, from 200-800 lbs per shelf

About Us

Honey-Can-Do International, LLC, was founded in 2008 and has been growing rapidly ever since, demonstrated by our multi-year position on the Crain’s Chicago Business “Fast 50” list and our rise in the Inc. 5000. We are one of the largest employer and land owner in Berkeley, IL, and have 160 employees in the Chicago land area.

Honey-Can-Do is a vendor-partner with nearly every major retailer in the United States who carry organization products as well as retailers in over 60 additional countries.

• ▶ STRONG CAPACITY - This shelf has 5 tiers, the height of each tier can be adjusted at every 1.6” increments to fit a variety of items, ensuring large capacity. The weight capacity of the per layer is up to 706lbs (evenly distributed and on a level surface), sturdy enough to shoulder your stuff, ensuring the large load capacity.
• ▶ SUPERB STABILITY - Our shelf comes with plastic footpads, adds much stability to the bottom of the shelf to prevent the floor from being scratched and damaged. And you can convert it into a shelving unit or horizontal as a workbench.
• ▶ BOLTLESS DESIGN, EASY ASSEMBLE - It is easy to build the storage rack, 5 shelves make assembly straightforward and bolt-free. Rivets can be perfectly installed into the slots on the posts. Simply insert and lower enables joints to be securely locked into place. All of the necessary mountings and instructions are accompanied. We offer a pair of gloves for your convenience. A rubber mallet recommended for assembly (rubber mallet not included).
• ▶ STURDY METAL FRAME & SPACIOUS MDF BOARD - The shelf size of each is 73.2"Hx 35.4"W x 17.7"D. Sold in a set of 2 storage racks. Constructed in high-quality steel and MDF boards. Its steel frame structure holds the MDF board more firmly for extra safety. The surface is covered by powder coating with smooth edges, which makes the shelf rustproof and smooth enough to prevent scratches.
• ▶ MULTIPLE-PURPOSE - The goods rack is versatile for storing or displaying in the basement, storage, workshop, shop, home, bedroom, living room, kitchen. Tools, books, magazines, kitchen utensils, children's toys, and other decorations can be placed on this metal shelving unit.

Product description

Industrial grade steel construction with durable Silver vein finish. Z‐beam design beams for strength and rigidity. Five shelves with particle board decking can be adjusted in 1‐1/2" increments. Includes a post coupler to make assembly faster and easier, no nuts or bolts. Can be assembled vertically as a shelving unit or horizontally as a Workbench.

• Shelves are made of particle board supported by double-riveted beams and braces, and adjust in 1-1/2 inch
• Shelving unit with four adjustable shelves and a 3,200 lb. Capacity is suitable for organizing and storing items
• Post connectors allow easy assembly in just minutes

User questions & answers

Question:	Is it actually 36 inches wide or is it
Answer:	Mine are both 36 inches
Question:	Is this rack suitable for a Florida garage? Never indicates it is for use in non-climate controlled areas and I am concerned the shelves will get mold
Answer:	I bought this for inside my house and plan on purchasing more. Shelves are thin particle board material. Even though the are very strong and the whole shelf unit itself is well constructed I do not plan to use them outdoors.
Question:	Is the depth actual
Answer:	Yes, the depth is 18”. High quality and very strong. And they are and quick and easy to build with just a rubber mallet.
Question:	Can I buy extra shelves I'm going to use it to hold my canned goods
Answer:	I don’t think they sell the shelves separately so you can buy extra

Product features

Muscle Rack Heavy-Duty Silver Vein Steel Shelving

The Muscle Rack heavy-duty steel shelving with its patented Z-Beam design is the perfect storage solution for getting any room or area organized. Its attractive and durable silver vein finish make it ideal for your home, office, warehouse, or anywhere storage is needed. This rack can store a variety of items, large or small, with the convenience of shelves that are adjustable every 1-1/2 inches. Heavy items, no problem, each particleboard shelf holds up to 800 pounds of evenly distributed weight.

The shelving unit's modular design allows the unit to be assembled a single 60"H shelving unit, two 30"H shelving units, or as a 30"H 2-piece workbench style unit.

Post Coupler

Post couplers allow easier post assembly and improved rigidity when assembled as a single shelving unit.

Adjustable Height Shelves

Posts are designed with slots every 1.5 inches, allowing the sturdy 800 lb capacity particleboard shelves to be adjusted to accommodate small to large items.

Bolt-Free Assembly

The shelving unit's bolt-free design allows for quick and easy set up. Shelves simply lock into post slots for a secure connection.

• ▶HEAVY DUTY: The Storage Rack can hold weight up to 600lbs (1pc), which can largely satisfy your most loading needs. (Capacity: 100lb capacity for each level, a total of 600 pounds of capacity.)
• ▶PRACTICAL USAGE: It’s a perfect choice for your to store lumber, firewood, gutters, sheet metal, PVC, pipes, ladders, surfboards, snowboards, golf clubs, construction tools, camping chairs, extra long pruning pole saw, etc.
• ▶DIMENSION: Shelf height 6.25" apart; 41" x 12.5" shelf depth; Made from high quality steel, with more efficiency and durability. Powdercoated orange finish provides rust protection for the surface, that lasts even with heavy use.
• ▶QUICK INSTALLATION: Easy Installation, with instruction. (Mounting hardware in need is included.)
• ▶SERVICE-ORIENTED - If you have any questions about the product, about color, adaptation, packaging, installation issues, or any other questions, please feel free to contact us. We will wholeheartedly provide you with excellent products and quality services. If you haven’t received our response more than one business day, please check your spam or Amazon account.

Product features

PRACTICAL USAGE

It’s a perfect choice for your to store lumber, firewood, gutters, sheet metal, PVC, pipes, ladders, surfboards, snowboards, golf clubs, construction tools, camping chairs, extra long pruning pole saw, etc.

HEAVY DUTY

The Storage Rack can hold weight up to 600lbs (1pc), which can largely satisfy your most loading needs. (Capacity: 100lb capacity for each level, a total of 600 pounds of capacity.)

DIMENSION

• Shelf height 6.25" apart;
• 41" x 12.5" shelf depth;

MATERIAL & COLOR

• Made from high quality steel, with more efficiency and durability.
• Powdercoated orange finish provides rust protection for the surface, that lasts even with heavy use.

QUICK INSTALLATION

• Easy Installation, with instruction.
• (Mounting hardware in need is included.)

Product description

☼About Dkeli Metal Shelves：

If you are looking for Easy to assemble/Steady & sturdy / Height adjustable/Multipurpose/Large storage space and Lockable wheels storage rack, Dkeli Heavy Duty Wire Shelving Unit are definitely born for you.



☼Superior Material:

√The metal shelf is made of high quality metal provides exceptional strength and stability.  

√The wire shelving unit have clean appearance with contemporary good looks that will nicely complement surrounding decor.

√This heavy duty garage shelving can hold up to 2100lbs.

☼User-friendly Design:

√No tools required to install, you can install the wire shelving within 10 minutes

√The cart has 4 omnidirectional wheels, 2 of them with brackets to lock the cart when needed.

 √You can adjust the height of the storage shelves according to the size of the item.

☼Multipurpose:

Suitable figure to put in your kitchen, basement, garage, office, living room, bedroom, bathroom, and other storage area

● Store your kitchen equipment simply with 6 shelves of space. There’s plenty of room for over-sized crock pots, dishes and trays. Or use in the pantry to store heavy cans, jars, and other items.

● Eliminate the clutter of a messy garage with Dkeli's heavy duty shelving. Steel construction and leveling feet mean these shelves are ready to work.

● Organize your office space by taking advantage of mobile shelving. The units are modular, and can be removed or added easily, without tools.



☼Product Specifications:

- NSF Certified

- Material: High quality durable metal

- Dimension: 48"x18"x82" (LxWxH)

- Load Capacity: 350 pounds per shelf

- Package Include：1 x wire shelving + 4x casters + 1x instructions

• ✔【STURDY CONSTRUCTION】The storage shelves can hold up to 2100 lbs weight. The wire shelving unit use durable steel construction, and to resist dirt buildup and corrosion. The garage shelving with sturdy posts and wire meshes enable the unit to hold up to 350 lbs of evenly distributed weight. Maximum entire unit weight capacity is 500lbs when equally distributed on casters. Wire shelving unit storage shelves garage shelving
• ✔【EASY TO ASSEMBLE】No tools required to install the storage shelves, simply snap clips onto the posts at your preferred height and then slide the garage shelving down the posts until they firmly rest on the clips, you only need to spend 10 minutes to install the wire shelving unit. Garage shelving storage shelves wire shelving unit
• ✔【MULTIFUNCTIONAL】This garage shelving is suitable for a wide range of applications. You can use this storage shelves in a variety of places, such as the bathroom kitchen garage. You can adjust the height of the storage shelves according to the size of the item. The spacing of each layer of this metal shelf can be adjusted. Shelves of the wire shelving unit are adjustable height at 1" increments. Wire shelving unit storage shelves garage shelving
• ✔【LARGE STORAGE SPACE】6 layer wire shelving unit have huge storage space. Tools, box, books, clothes, bag, small appliances, kitchen suppliesand or anything you'd like to keep organized and accessible can be placed on this storage shelves. The garage shelving doesn't occupy too much space, but it can create more additional space. Wire shelving unit storage shelves garage shelving
• ✔【EXCELLENT QUALITY & 100% SATISFACTION GUARANTEE】This wire shelving unit is NSF listed. The garage shelving black powder-coating finish naturally matches most colors and design schemes, perfect for kitchen, garage, bathroom, living room, office and more. And if you have any problem with the storage shelves, please get in touch with us. Wire shelving unit garage shelving storage shelves 6 tier shlef

Product features

No-Tool Assembly

The wire shelf is super esay to assemble, simple three step installation can be finished lesst than 10 minutes. 1.Select the appropriate position to secure the plasitc sleeves to the tube. 2.Put the layer net into the pipe's plasitc sleeves. 3.Assemble the remaining layers shelf in sequence.

Thickened Steel Pipe

The wire shelving made of high-strength material and thickened pipes is very durable, black powder coating can prevents rust. It is the best choice for your kitchen, living home, office, bedroom, garage.

High Load Capacity

The shelving unit can hold a lot of weight. Each shelf of the wire shelf is 350lbs if loaded equally distributed,assembled with feet levelers. The max load capacity of whole metal shelf is 500 lbs if assembled with wheels.

NSF-Certified

All NSF-certified products have been tested by NSF International to NSF/ANSI Standard 2 for use in dry and heated storage environments. *certificate number：C0286681-01

*issued date：June 14，2016

Adjustable Wire Shelves

Each shelf is adjustable at 1-inch intervals with the plasitc sleeves. You can change the size of the wire shelf space at any time to satisfy your needs.

Two Assembled Options

Install casters for easily positioning and storage when unloaded. Or, install with leveling feet for a more permanent solution to heavy problems.

M Shape Design

M-shaped mesh surface to strengthen load-bearing.

Kitchen

Garage

Office