14 best skinning knife with walnuts

Product description

This Damascus steel Walnut skinning knife by SZCO Supplies is 6.5 inches in overall length. The blade is made of ladder pattern Damascus steel. The handle is made of Walnut wood with brass pins. This is a full tang knife. This knife comes with a leather sheath.

• 6.5 inches overall length
• Damascus steel blade
• Walnut wood handle
• Full tang knife
• Leather sheath

Product description

This Damascus Skinning Knife with Walnut Handle by Szco Supplies is 6 Inch in length. The blade is made of multi layered, pattern welded Damascus steel. The handle is made of genuine walnut and the knife is full tang. This knife comes with a leather sheath.

• 6 Inch in length
• Walnut handle
• Damascus steel blade
• Full tang design
• Comes with sheath

Product description

Features: Overall 9.5" Long with gut hook skinning knife 4.5" long full tang blade with Gut hook feature. Available in Walnut, KOW, Green and Blue wood Scales 5" long full hand fingers serration Scale with Damascus steel Bolster Scale is bling with Mossaic pin, 2 steel pins and inserting hole for extra strength Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick Twist pattern Damascus steel drop point blade Up to standard gut hook skinning Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Our tested Hardness is 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability.

• 9.5" Long hand forged Damascus steel full tang straight back blade gut hook skinning Knife. Available in Walnut, KOW, Green and Blue wood Scales. Full tang blades are considered stronger and durable then non full tang.
• 5" long full hand fingers serration Scale with Damascus steel Bolster. Scale is bling with Mossaic pin, 2 steel pins and inserting hole for extra strength.
• Hand forged rain drop pattern Damascus steel straight back blade. Approximately 5 mm Thick rain drop pattern Damascus steel blade.
• Comes with a fine quality extra thick cow hide leather sheath with belt inserting loop. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel with hundreds of layers folded
• Up to the standards of pocket knife, camping knife, personalize knife. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

User questions & answers

Product description

Features: Natural polished Walnut wood scale with Damascus bolster 4.5" long Scale is bling with a 5 silver pins and an inserting hole for extra strength Overall 9" Long with 4.5" long full tang blade Full tang blades are considered stronger and durable then non full tang Approximately 5 mm thick Twist pattern Damascus steel blade Up to standard skinning and hunting Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability. DISCLAIMER: Our knives are very sharp so open and use them very carefully. We are not responsible for any injuries associated with the use of our knives. Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.

• 9" Long hand forged Damascus steel full tang blade skinning Knife, Cow Leather sheath
• Polished walnut wood scale with Damascus bolster, 4.5" long Scale is bling with 5 silver pins and an inserting hole for extra strength
• Overall 9" Long with 4.5" long full tang blade Full tang blades are considered stronger and durable then non full tang Approximately 5 mm thick Twist pattern
• Damascus steel blade Up to standard skinning and hunting Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt
• Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

Features: Natural polished Walnut wood scale with Damascus bolster 4.5" long Scale is bling with a 5 silver pins and an inserting hole for extra strength Overall 9" Long with 4.5" long full tang blade Full tang blades are considered stronger and durable then non full tang Approximately 5 mm thick Twist pattern Damascus steel blade Up to standard skinning and hunting Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability. DISCLAIMER: Our knives are very sharp so open and use them very carefully. We are not responsible for any injuries associated with the use of our knives. Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.

• 9" Long hand forged Damascus steel full tang blade skinning Knife, Cow Leather sheath
• Polished walnut wood scale with Damascus bolster, 4.5" long Scale is bling with 5 silver pins and an inserting hole for extra strength
• Overall 9" Long with 4.5" long full tang blade Full tang blades are considered stronger and durable then non full tang Approximately 5 mm thick Twist pattern
• Damascus steel blade Up to standard skinning and hunting Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt
• Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

Features: Available in Black, Red, Beige and brown scales Hand forged rain drop pattern Damascus steel blade Overall 9" Long full tang blade skinning knife Trailing point blade Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick Twist pattern Damascus steel blade with gut hook Up to standard hunting and skinning Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it. Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability. DISCLAIMER: Our knives are very sharp so open and use them very carefully. We are not responsible for any injuries associated with the use of our knives. Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.

• 9 inches Long full tang blade hand forged Damascus steel Skinning Knife available in Black, Brown, Red and yellow wood colors
• Hand forged Rain drop pattern trailing point Damascus Steel blade
• Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Full tang blade
• Up to the standards of skinning knife, camping knife, personalize knife.
• Approximately 5 mm Thick Twist pattern Damascus steel blade. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel

Product description

Features: Available in Camel Bone Walnut wood,Blue wood and green colored wood scales. Overall 9.5" Long full tang straight back blade knife Hand forged rain drop pattern Damascus steel blade Solid stainless steel bolster 4.5" long Scale is bling with Mosaic pin, 2 steel pins and inserting hole for extra strength Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick rain drop pattern Damascus steel blade Up to standard skinning pocket Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability.

• 9.5" Long hand forged Damascus steel full tang straight back blade skinning Knife Available in Camel Bone Walnut wood,Blue wood and green colored wood scales. Full tang blades are considered stronger and durable then non full tang.
• 4.5" long oval Scale is bling with 2 steel Pin and and brass bolster.
• Hand forged rain drop pattern Damascus steel straight back blade. Approximately 5 mm Thick rain drop pattern Damascus steel blade.
• Comes with a fine quality extra thick cow hide leather sheath with belt inserting loop. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel with hundreds of layers folded
• Up to the standards of pocket knife, camping knife, personalize knife. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

Features: Available in Camel Bone Walnut wood,Blue wood and green colored wood scales. Overall 9.5" Long full tang straight back blade knife Hand forged rain drop pattern Damascus steel blade Solid stainless steel bolster 4.5" long Scale is bling with Mosaic pin, 2 steel pins and inserting hole for extra strength Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick rain drop pattern Damascus steel blade Up to standard skinning pocket Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability.

• 9.5" Long hand forged Damascus steel full tang straight back blade skinning Knife Available in Camel Bone Walnut wood,Blue wood and green colored wood scales. Full tang blades are considered stronger and durable then non full tang.
• 4.5" long oval Scale is bling with 2 steel Pin and and brass bolster.
• Hand forged rain drop pattern Damascus steel straight back blade. Approximately 5 mm Thick rain drop pattern Damascus steel blade.
• Comes with a fine quality extra thick cow hide leather sheath with belt inserting loop. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel with hundreds of layers folded
• Up to the standards of pocket knife, camping knife, personalize knife. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

Features: Available in Walnut wood, KOW wood, 2 tone black dollar wood and Red colored wood scales. Overall 9.5" Long full tang straight back blade knife Hand forged rain drop pattern Damascus steel blade Solid stainless steel bolster 4.5" long Scale is bling with Mosaic pin, 2 steel pins and inserting hole for extra strength Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick rain drop pattern Damascus steel blade Up to standard skinning pocket Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability.

• 9.5" Long hand forged Damascus steel full tang drop point blade skinning Knife Available in Walnut wood, KOW wood, 2 tone black dollar wood and Red colored wood scales. Full tang blades are considered stronger and durable then non full tang.
• 4.5" long Scale is bling with Mossaic Pin, 2 brass pins and and brass bolster.
• Hand forged rain drop pattern Damascus steel straight back blade. Approximately 5 mm Thick rain drop pattern Damascus steel blade.
• Comes with a fine quality extra thick cow hide leather sheath with belt inserting loop. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel with hundreds of layers folded
• Up to the standards of pocket knife, camping knife, personalize knife. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

Features: Available in Camel bone, Bull horn, Rose and red wood scales Overall 9.5" Long full tang straight back blade knife Hand forged rain drop pattern Damascus steel blade Solid stainless steel bolster 4.5" long Scale is bling with Mosaic pin, 2 steel pins and inserting hole for extra strength Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick rain drop pattern Damascus steel blade Up to standard skinning pocket Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability. DISCLAIMER: Our knives are very sharp so open and use them very carefully. We are not responsible for any injuries associated with the use of our knives. Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.

• 9.5" Long hand forged Damascus steel full tang drop point blade skinning Knife available in Rose wood, Camel bone, Bull horn and Red wood scales. Full tang blades are considered stronger and durable then non full tang.
• 4.5" long Scale is bling with Mossaic Pin, 2 silver pins and inserting hole for extra strength.
• Hand forged rain drop pattern Damascus steel straight back blade. Solid stainless steel bolster. Approximately 5 mm Thick rain drop pattern Damascus steel blade.
• Comes with a fine quality extra thick cow hide leather sheath with belt inserting loop. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel with hundreds of layers folded
• Up to the standards of pocket knife, camping knife, personalize knife. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

Features: Available in Walnut wood, Camel bone and Yellow KOW wood scales Overall 9.5" Long full tang drop point blade knife Hand forged rain drop pattern Damascus steel blade Solid stainless steel bolster 4.5" long Scale is bling with 2 steel pin Full tang blades are considered stronger and durable then non full tang Approximately 5 mm Thick rain drop pattern Damascus steel blade Up to standard skinning pocket Knife Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Tested Hardness 56 to 58 HRC. Tips to Care Damascus knife: Damascus steel as well as 1095 high carbon steel knives are different than some other common steel knives,because of its high carbon content they can be rusted if not care properly. If you have seen rust accidentally then use WD40 to remove it Never store your knife for long time in leather sheath. Leather can absorb water which will rust the knife. Always clean the blade after using and apply oil or wax (please use cooking oil on Chef Knife) before you store it, for its longer life and durability. DISCLAIMER: Our knives are very sharp so open and use them very carefully. We are not responsible for any injuries associated with the use of our knives. Our products are intended for legal use only by responsible buyers. We will not sell our products to anyone under the age of 18.

• 9.5" Long hand forged Damascus steel full tang drop point blade skinning Knife available in Walnut wood, Camel bone and Yellow KOW wood scales. Full tang blades are considered stronger and durable then non full tang.
• Yellow Natural KOW wood scale with steel bolster. 4.5" long Scale is bling with 2 silver pins
• Hand forged rain drop pattern Damascus steel blade Solid stainless steel bolster. Approximately 5 mm Thick rain drop pattern Damascus steel blade.
• Comes with a fine quality extra thick cow hide leather sheath with belt inserting loop. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel with hundreds of layers folded
• Up to the standards of pocket knife, camping knife, personalize knife. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC

Product description

The BK62 represents a direct link to the forefather of American Woodcraft, Mr. Horace Depart himself. His tome Camping and Woodcraft (first published in 1906) is still required reading for modern bush crafters and outdoorsmen. Ethan Becker owns the only known original 5" Depart Knife still in existence, a blade that spawned an entire genre of knives, and the BK62 is as close as you can get in a production knife, executed brilliantly by the craftsmen at KA-BAR. The 5" spear point blade is a bush craft classic thanks to its versatility. This was the knife Depart designed and used to do everything. . . from wood carving to skinning to food prep and everything in between. The edge itself comes all the way back to the handle scales, ensuring maximum utility. There is enough length to do big jobs, but the blade is still nimble and eager to move. The full flat grind makes it a terrific slicer and works well for virtually any task imaginable. A slight sedge at the spine makes the blade more efficient by reducing drag when cutting through soft or fibrous materials such as vines or large game. KA-BAR's fantastic 1095CV steel works great in the field, with plenty of toughness and edge retention. It lacks a coating, but the stonewashed finish offers a modicum the corrosion resistance (although it will still patina) for the steel, as well as minimizes the appearance of scratches after years of service. The handles are bolt-on in typical Becker fashion, but the scales are made of walnut wood for a classic look and warm feel. The handles are slim but hand filling, and a swell at the front enables excellent purchase for pinch grips and when choking up for fine work. A tapered tang makes for perfect composure, with the balance point hitting right at the index finger. Also included is a period accurate brown leather sheath for easy and secure carry. What worked 100 years ago still works today. The BK62 is a versatile blade that will find its way into the kit of campers, hikers and bush crafters alike. As Mr. Becker likes to say about this design, "There is nothing you don't need on this knife, and everything you need is there. " Ethan Becker founded Becker Knife & Tool in the early 1980's and set about designing, manufacturing and selling the industrial-strength tactical and survival knives that he had always wanted for himself. His products, the BK&T line, have gone a long way to making these now popular all-black knives in demand. Mr. Becker spends as much time as possible in the outdoors testing a variety of equipment and knife designs, and also works to expand his primitive and outdoor skills. He collaborated with KA-BAR in 2008 and has reintroduced and brought up to date his best selling models. Specifications: - Blade Length: 5. 125" - Closed Length: 4. 563" - Overall Length: 9. 688" - Blade Material: 1095 Coven Carbon Steel - Blade Thickness: 0. 158" - Blade Hardness: 56-58HRC - Blade Style: Spear Point - Blade Grind: Flat - Blade Finish: Stonewash - Handle Material: Walnut Wood - Sheath Material: Leather - Weight: 6. 4 oz. - Designer: Ethan Becker

• Fixed Blade / Overall Knife Length: 9. 625 inches
• Blade Length: 5. 125 inches / Blade Thickness: . 158 inches
• Blade Width: 1. 1875 inches / Edge Angles: 20 Degrees
• Knife Blade Material: 1095 Crow Van / Walnut Handle
• Brown Sheath included / Made in the United States
• Department Name: unisex-adult

User questions & answers

Product description

A HUNTERS RIGHT CHOICE WITH COMFORTABLE HANDLE, SMOOTH PERFORMANCE FOR YOUR MULTI-PURPOSE TASK:



Damascus steel is forged using an old age technique which involves melting steel pieces in charcoal fire. All knives are handmade by blacksmiths by following the centuries old process. The key to the sharpness of these blades is their blending in a reducing atmosphere in an oxygen lacking furnace. This is the prime reason behind Damascus Steel Knives tending to stay sharper for the longer period of time.



PRODUCT FEATURES:



BLADE HARDNESS: 58-60 HRC



PATTERN: Twist pattern Damascus steel



HANDLE MATERIAL: Beautiful Original Walnut Wood with Mosaic Pins



BLADE MATERIAL: Damascus Forged Steel



Bolster: Beautiful File Work Solid Brass



YOU WILL NOT FIND A BETTER QUALITY HANDMADE KNIFE IN THIS PRICE:



Handmade Damascus Steel Hunting Knife is one powerful beast of a blade that stands up to harsh use in harsh environments. The Hunting knife has Classic, Handmade Premium Quality Sharp Edge Fix Blade. Overall it can be carried anywhere. Whether you're chopping tree branches or slicing through thick ropes, you'll get the job done very fast.



APPLICABLE OCCASIONS:



This knife will get any job done in the field. The classic look and ease-of-use design guarantees you to rely upon it. Hunting, Skinning, Tactical, Survival, Camping, Every Day Carry. This design fills the need for a sturdy, compact knife with a versatile skinning blade.

• Prime Quality Handmade Damascus steel Hunting Knife Sharp Edge Fix Blade
• Overall length: 12” inches Blade length: 7'' inches Handle length: 5” inches
• Knife handle is made up of Original Beautiful Walnut Wood with Mosaic Pins which gives you a firm grip on the knife.
• Damascus Knives are suitable for hunting, camping, survival, tactical, military, fishing and outdoor situations.
• This Damascus Steel Knife comes with a Beautiful Leather Sheath.

Product description

Gone are the days when the heft of a kitchen knife determined its quality. Home cooks deserve an easy-to-use, well-balanced knife that delivers razor-sharp cuts, will not dull, and a design that complements todayâ s well-designed kitchens. Enter Swiss modern, offering a sleek, beautifully crafted handle, which is ergonomic and exceptionally easy to maneuver for any task. This new collection is well-appointed thanks to the innovative design created for home cooks and inspired by over 130 years of Victorinox craftsmanship. Handles are handmade with the utmost precision from sustainably sourced European walnut and are exceptionally light weight and visually stunning, providing a first-class experience in the home kitchen.

• Highly versatile chef's knife that's designed to multitask; expertly chop, mince, slice, and dice with this go-to kitchen essential
• Swiss modern handles are geometrically shaped and made of sustainable, richly grained Italian Walnut Wood making them lightweight with a contemporary feel
• 6" blade offers superior maneuverability making it perfectly suited for precise cuts, while the width of the blade provides strength needed for larger tasks, such as skinning a pineapple
• High-carbon, stainless steel blade is razor-sharp and tapers even towards the cutting edge to provide perfect balance and superior edge retention
• Expertly crafted in Switzerland since 1884; designed for Professionals who use knives all day, every day; Lifetime warranty against defects in material and workmanship