14 best fireplace replacement parts

• Electric Fireplace Blower / Squirrel Fan & Heating Element / Far Infrared Heater.
• Fits Twin Star brand electric fireplace and other Wood / Gas Burning Stove or Fireplace.
• Total Width (Does not include Heating Element) = 9.75", Depth = 3.73", Height = 3.23" Blower fan Size: Diameter 60mm x L:185mm; IR Heater size:L 200*35(mm) ; 1350W, 120V; Temp Switch: 105C / 221F.
• Motor UL Approved, Durable, Quiet and Efficient, Genuine NEW Factory parts.
• ATTN: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower, if you have any other questions, please feel free to contact us.

User questions & answers

Question:	I have a duraflame dfs 500 infared, will this work
Answer:	It has a menu for 3 or 4 different hog calls. I have only used once for a couple of hours to try to draw in hogs.
Question:	Will let this fit a duraflame electric fireplace model number 23ii033fgl
Answer:	Yes, the calls include multiple types of rabbits, squirrels and lot's of crow calls. There are over fifty animal species on the calls and over 700 calls. They keep adding more calls at no cost to those who own the caller!
Question:	Will this fit twin star model 33e
Answer:	I've only used the pre-loaded iHunt app sounds but can sadly testify that when I forgot to put my iPhone ringer on 'Silent' it cheerfully played the ringtone from an incoming call and scared off two deer I was watching, so I would think that as long as you are connected (bluetooth) it should play whatever your phone is playing. It's just a speaker and the app is what has the actual software.
Question:	Will this replace the factory 10006404 part
Answer:	This caller has over 20 serious crow calls. Some are better than others but they seem to work well. Crows learn pretty quick so having a good variety of calls is important in my opinion.

Product features

Hongso Replacement Fireplace Fan Blower & Heating Element for Twin Star Electric Fireplace

Specification：

• Total Width (Does not include Heating Element) = 9.75", Depth = 3.73",Height = 3.23"
• Blower fan Size: Diameter 60mm x L:185mm;
• IR Heater size:L 200*35(mm) ;
• 1350W, 120V;
• Temp Switch: 105C / 221F

ATENTION: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower.

Keep Room Warm and Saving Energy

• Saving Energy & High Efficiency, Long Lasting.
• 100% Improvement in Heat Output, Reduce room heating time. Improve the heat puts out of your fireplace.

High Quality

• Simple design, easy to install.
• Premium Material: Aluminum + Galvanized Steel.
• Certifications: Motor UL Approved.

Quiet and Powerful

• The blower fan is powerful but quiet, will make you feel comfortable.
• Please replace your fan when it had become noisy after years of use.

Product description

Universal fireplace remote control for millivolt gas fireplaces. Thermostatic and manual control. Direct replacement for Majestic Fireplaces, Vermont Castings Fireplaces and Stoves, and Monessen Fireplaces.

• RCST remote has Battery-Operated Transmitter and Receiver
• On/Off/Thermostat Functions with LCD Temperature Display | 30-ft. Operating Distance
• Childproof protection | Thermal-safety shutdown | 16 Security Codes
• Low Battery Indicator | All Batteries Included
• Includes easy battery access plate for optional wall mounting (Black and White plates included)

User questions & answers

Question:	I have a Monessen ventless propane gas fireplace and want to make sure this remote will work with it
Answer:	No, there is no aux port on the Caller. The Handheld Caller emits at about 115 dB's, which is plenty loud enough for animals to hear.
Question:	How do you enable the auto fireplace shutoff and remember the last setting? Holding 3 seconds doesn't seem to work just takes me down one setting
Answer:	you can not load other sounds.
Question:	Will this work with vermont castings indvr
Answer:	Haven't actually used in a hunting situation but it sounds good.
Question:	This comes with remote and receiver correct
Answer:	I have this call, but I'm not sure if it has raccoon sounds. www.gsmoutdoors.com does have digital downloads with several raccoon sounds. The range of the remote is 300 feet. Hope this helps.

Product description

Replacement Dexen Remote control module - black - for Hearth & Home gas stoves and inserts. Used for both NG and LP units. This is an IPI control module, does not work with DSI, HSI or standing pilot units. Used by Majestic, Quadra Fire, Heatilator, and Heat n Glo Fireplaces. Check you owners manual for part numbers.

• Requires 6 Volt Power adapter
• Used for both NG and LP units
• This is an IPI control module, does not work with DSI, HSI or standing pilot units
• Heat n Glo, Heatilator, Quadra Fire, and newer Majestic Fireplaces
• Replaces older 2166-307 which is not longer available

User questions & answers

Question:	Will this module work on a heat n glo supreme i
Answer:	We had a greystone in our RV and sent it back. It didn't fit. Sorry can't answer your question.
Question:	Will this replace the 80D0018 controller for a majestic cdvt36nsc
Answer:	I wonder if you ended up getting and if it worked for your fireplace. WE have the same one and ours seems to have stopped working.
Question:	Will this work for heatilator cd4842ir-c module pn
Answer:	I have a 33e01, fits perfectly except the mounting holes on the blower do not line up with existing mounting bracket. I had to drill new holes in blower housing to attach to the existing blower mount. Blower is quiet and works great.
Question:	Will this replace heat and glo
Answer:	I used the part suggested by Hongso and it fit and worked perfectly. Just measure your current part and compare with their part...if it matches, it should work fine. I replace mine a few years ago and it is still working great.

Product description

Compatibility:

• Works with all Ambient Millivolt Remote Transmitters with 4 Dip Switches
• This unit is compatible with MOST 7 and 8 dip switch remotes. We have found there are some 7/8 Dip switch remotes that are incompatible with the new receivers. If this receiver cannot be paired with your remote a new remote transmitter will also need to be purchased. WARNING This receiver comes with a new wiring harness, the older style wire harness will need to be replaced when installing this unit.
• NOT A REPLACEMENT FOR RC-RX or RCMHL-RX RECEIVERS THIS IS NOT COMPATIBLE with RCBHC or RCMHL Remotes. The Skytech MRCK (ASIN B00470V9N6) and MRCK-TH (ASIN B009LNP3YA) are complete remote and receiver packages that will work as a replacement for these items.
• NOT A REPLACEMENT FOR Skytech, Empire, Acumen, or other brand remotes.

Standard Features:

• Remote Receiver and Wire Harness Only
• Replacement for RCM-RX / RMC RX receiver
• Receiver for RCT, RCM, RCMT, RCT, RCST, RCB, TLM, TLT, WWTD, and WMTD transmitters only. 
• Handheld Remote transmitter not included.
• Ambient Technologies replacement receiver for fireplaces and gas logs.

Includes:

• Remote receiver
• Two prong wire
• Black face plate kit
• White face plate kit
• 4 AA Batteries

This unit has 4 dip switches for syncing with the remote transmitter. Instructions are provided on how to set transmitters with 7 and 8 dip switches.

• Replacement for Ambient Brand RCM-RX / RMC RX receivers ONLY
• Only Compatible with Ambient brand remotes. NOT Compatible with Skytech, Acumen, or other brand remotes.
• Replacement for Ambient Brand RCM-RX / RMC RX receiver
• Receiver for RCT, RCM, RCMT, RCT, RCST, RCB, TLM, TLT, WWTD, and WMTD transmitters only.
• See Product Description for Compatibility Questions

User questions & answers

Question:	I need to replace just the two prong cord, which has broken. is the two prong connection cord available for purchase separately
Answer:	This worked fine on mine.
Question:	I can not get the remote to work right now, the red light is flashing very fast, after replacing the batteries, twice, and I tried to reset the tran
Answer:	call ambient Mon-Fri 8-5 CST 877.374.4404
Question:	I'm trying to replace an acumen model: rx05 receiver s/n 215097. is this receiver compatible with the associated 4 dip switch remote
Answer:	It works with ANY millivolt unit. If you unit has a standing pilot, it will work. If your unit will not turn on in a power outage, it won't work.
Question:	Have replaced ambient transmitter twice. both times battery door has popped open and does not maintain the connection. can i purchase battery door onl
Answer:	Yes, it comes with a remote, a receiver, and batteries.

Product description

Wood Stove Maintenance:



✔ Replace worn gaskets yearly on air-tight stoves.

✔ For peak efficiency check woodstove gaskets regularly and replace each season.



Benefits of Midwest Hearth Gaskets:



• Graphite impregnated gasketing is more abrasion resistant and less likely to get stuck with creosote ensuring a better and more consistent air tight seal.

• Black gasket is used by leading stove manufacturers due to better aesthetics and higher performance.

• There is no need to paint graphite impregnated gasketing.



Directions:



• Be sure stove is cold.

• Wear protective gloves and eye protection.

• Protect work area with a drop cloth.

• Use a screwdriver or scraper to remove old gasket and clean door channels down to bare metal.

• Apply a bead of gasket cement in door channel.

• Press new gasket into wet cement and close door to check for airtight fit.

• Trim gasket as needed.

• Clean up all cement spills or excess immediately with wet cloth.

• ABRASION/CRUSH RESISTANT - Graphite impregnation/lubrication makes gasketing more abrasion resistant.
• GRAPHITE IMPREGNATED FIBERGLASS - Less likely to get stuck with creosote ensuring a better and more consistent seal.
• BLACK GASKET - Used by leading stove manufacturers due to better aesthetics and higher performance.
• PROFESSIONAL STRENGTH CEMENT - Withstands 2000-degrees Farenheit. Adheres to all types of stoves from steel to cast iron.
• MADE IN USA - Quality manufactured in the United States.

User questions & answers

Question:	How "flat" or compressed will this rope get if used between a rock fireplace and fireplace glass door unit (on metal)? Part to close gap / seal air fl
Answer:	I can only guess yes. Reasoning; fireplace manufacturers are not electronic circuit designers. They are basically metal fabricators who choose industry designed off the shelf controllers, and valve assemblies. Call a local dealer and do some research
Question:	will this work on my englander pellet stove model 55 – shp
Answer:	No. you need the signature command module for that unit. 80D0018 is on Amazon.
Question:	My old door gasket is 7/8. Can I use a 1 inch size of gasket instead
Answer:	The service parts guide shows this is the module for that unit. 582-833 is an orifice one line down from the module.
Question:	Which 5/16" gasket to use on a jotul door -- the armored rope version or the rope version
Answer:	I don't recognize that part number. There should be a tag on your old control module with lots of info. On that should be the part number: PN: 2166-307 was the module I had, and this one (2166-347) is its latest replacement. Works for me (old one was fried in a power surge).

Product description

Package Include:

~ Thermopile (main valve sensor)

~ Fine thread thermocouple (pilot sensor)

~ Ignitor wire and ceramic probe

~ Pilot tube

This includes the bracket that goes next to the burner which holds it all together.



Compatiable with:

~ Majestic Gas Stoves: 33BDVR 33BDVT 33LDVR 33LDVT 360DVS2 360DVS2RNMH 360DVS3 360DVSL 360DVSR 36BDVR 36BDVT 39BDVT 43BDVR 43BDVT 43LDVR 43LDVT DV360 DV580 DVB4136 DVHVAC36 DVR33 DVR36 DVR39 DVRT36 DVRT39 DVRT41 DVRT43 DVRTSB DVRTSB DVT36 DVT39 DVT43 NV360 NVBC36 NVBC42 NVBR36 NVC36 NVC39 NVC43 NVSTR36 ODGR400 ODGR500 ODGSR36A ODGSR42A RDV4136 RFSDV22 RFSDV32 RFSDV32RMH RFSDV34RF RFSDV42 RHEDV25 RHEDV32 RHEDV42



~ Vermont Castings Gas Stoves: 33XDV 36XDV 39XDV Brookhaven 20DVT LHEC20 LHEC30 LHECDV20 LHECDV30 LHER20 LHER30 LHERDV20 LHERDV30 Oxford DV and NV OXDV30 Pinnacle DV Rear Vent Radiance RADVT/ RADVTCS Radiance RADVT/RADVTC Radiance RDVOD Radiance RNVOD RFSDV24 Stardance DV (3900-3916/ 3940-3956) Stardance Natural Vent SNV30 Stardance Rear Vent SDDVR/ SDDVRC Stardance SDDVT SDDVTCS Stardance SDDVT/ SDDVTC Stardance SDV30 Rear Vent Stardance SDV30 Top Vent Stardance DV25



~ Dutchwest Gas Stoves: 2465 2466 NV 2467 NV 2468



~ Monessen Gas Stoves: RFSDV34TSR RFSDV24SR



~ Century Gas Stoves: Jefferson Direct Vent



~ Temco Gas Stoves: GFPN41.

• Used for natural gas ONLY.
• Replacement of OEM Majestic SIT Pilot and HHT Pilot Assembly Part 10002264.
• With this unit you end up with a simple drop in replacement that should last for decades.
• Pilot tube length 24", thermocouple length 22.5", thermopile length 22", and ignitor wire length 25.5".
• Replacement 3 Way Pilot Assembly for HHT, Majestic, Monessen, Temco, and Vermont Castings Fireplaces and Stoves.

User questions & answers

Question:	Does this need or include a gasket
Answer:	Honestly, with how these receivers work or don't work, you may want to just replace it as it also comes with the cord. Other option is to splice the cord back together with automotive butt connectors.
Question:	Do you know if this will fit an older Vermont Castings Radiance stove
Answer:	When you initially install the batteries the light should flash a few times, after that it should not flash unless it is getting a signal from a remote or the batteries are low. I have never seen a unit flash the light fast and consistently for an extended period of time like you are stating. It is possible the unit you received is defective, I would recommend requesting a refund for the unit. If you have questions on this please call us at 877-669-4669. Thank you, WholesaleNow.
Question:	Is this a suitable replacement for HearthStone part # 7211-372 ? It looks the same
Answer:	No, this will not work with Acumen remotes. We have tried with a number of customer to get them working together with no success.
Question:	It less than 6mts and, why unit purchase is not working
Answer:	No but the clips on door is fragile. When you buy this it comes with both a black and white. You save as spare. Or you can use electrical tape to hold doo closed if one of the tabs are broke.

• Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread
• Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)
• Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm
• Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)
• Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip)

User questions & answers

Question:	Is it difficult to replace this in the bond canyon ridge fire pit? i see someone said it will work for that. wondering if it's easy to replace
Answer:	I've had Bond since December 2017, it controls fans and light but not dimming...I'm still waiting for tech support to get back to me with a solution, after 12 emails back and forth, before the return period closes and it's not looking promising at this point.
Question:	can this be used for a bbq/smoker grill
Answer:	Update - Currently there is no device on Home kit echo system that is one way radio. The BOND communicate with ceiling fan and fireplaces as a one way radio controller. Apple does not seem to allow one radio on their system.
Question:	Does this valve have an m8 thermocouple opening? Seems likw aome people receive a valve with a thermocouple that does not match
Answer:	For some reason, Amazon does not allow review on this item (probably because of negative reviews). This Bond Smart Home Automation has lots of potential, but presently it is still in a very primitive stage (just bought one 4/2018) it can only learn the remote of few popular ceiling fan company like Hunter at this time (I have a Reiker fans, and it cannot learn the remote and customer service cannot help). I am still keeping the Bond because it control my Hunter fans very well from Alexa. I wouldn't consider this Bond for anything else but popular ceiling fans only.
Question:	Is this the valve responsible for maintaining flame height on a firepit
Answer:	I have mine setup with Homekit using HomeBridge

Product features

Low Pressure Fire Pit Control Valve Assembly Kit

* The valve is a flame failure valve max 50000 BTU

* The Thermocouple Length 24" inch Long

* The Valve Thread 3/8" Male Flare on both sides

* The Knob can be replaced if you do not like it ( with 0.236inch/6mm stem)

Product description

Majestic 10002264 Pilot Assembly NG Fireplace Replacement Part

• Majestic & VC Pilot Assembly NG
• Part # 10002264
• Original HHT Pilot Assembly
• Used on Majestic, Monessen, Temco and Vermont Castings Gas Units

User questions & answers

Question:	Will this work for majestic 30ildvnv? part number in manual is 37d0018, obviously different from this one's.. although visually they look identical
Answer:	I'm not sure if this will help you or not. We use this on our Timberline stove. It flattened out after a few days. Of course, it is tightly latched. I don't think this would flatten out without the door being latched. Hope that makes sense. 😏
Question:	Hello - will this fit with my Majestic gst336 direct vent fireplace? It was installed in
Answer:	You'll have to do a little research, either your owners manual or maybe the manufacturer's website might be able to provide gasket dimensions.
Question:	will this work in 36DVX
Answer:	This answer may be late, but might help others shopping. If it says 7/8 inch you should replace with 7/8. I tried a 1 inch when I couldn't find 7/8 and was shocked to discover the 1 inch was considerably larger around than the supposed 1/8 inch difference would suggest. I did get it to fit snuggly, and thought incorrectly that the extra snug fit was a good thing, but I was wrong. My whole house smelled of burning wood. I thought there was no way this thing was leaking as tight as it was, and thought something else must be wrong, like a chimney leak. But when I replaced, out of desperation, the 1 inch with a special order 7/8, low and behold! Fixed!
Question:	Does this assembly fit/work for the majestic gas fireplace dvr 33 rn thank you
Answer:	I used the standard 5/16” rope version on my jotul. Works beautiful.

Product description

Nobody wants to crawl around the fireplace and get dirty just to enjoy a fire. if its not the cobwebs, soot or bad knee most of us ont even bother using the gaslogs because the startup process just sucks.The On/Off remote model 1001-A manufactured by Skytech and sold under the Peterson brand is your most economical and easy to use remote option on the market. Enjoy your beautiful gaslog set witht the touch of a button. On when you feel like it and off with ease. With a simple 2 wire plug and play setup on any compatible logset you are on your way to enjoying a cozy winter. Order yours today

User questions & answers

Question:	Is this remote and receiver compatiable with a heat n glow sl 750 tr-c fireplace
Answer:	No, you don't need a gasket. It goes metal to metal. t has everything to connect.
Question:	Does the remote work with a model# 1315 receiver
Answer:	Possibly, depends on which valve it has
Question:	How do i connect this when my current unit connects to on/off wall switch and is using the th/tp th conn. already
Answer:	If it looks the same it should work just fine.
Question:	I need to replace an older skytech remote. Do I need to also replace the receiver
Answer:	Thermocouple keeps pilot light on, thermogenerator lights burner, if burner doesn’t light or stay lit , the thermogenerator is bad. You can change one or the other but I recommend changing both at same time, the one that isn’t changed will go bad soon anyway

Product features

Skytech Fireplace Remotes

Fire at the touch of a button! Enjoy the convenience of a fireplace remote control for your gas fireplace. We offer a wide selection of products to make using your fireplace even easier at Skytech Fireplace Remotes. We offer low prices every day.

We're glad you're here, because we wouldn't get to work for this great company without you.

Please call us anytime for great customer service.

Product description

➤Fits Heat Surge brand electric fireplace



Dimension:



Total Width (Does not include Heating Element) = 10",

Depth = 3 1/2",

Height = 3"

Blower fan Size: Diameter 48mm x L:190mm;

IR Heater size:L 210*35(mm) ; 1350W, 120V



2303 BTU's / 4606 BTU's ;

Standard Setting Heats a 12' x 13' room.

Motor UL Approved, Durable, Quiet and Efficient,

Easy to install Note: Please measure the space for installing this blower in your Stove or Fireplace, and compared with the dimension of this blower. If you have any questions or concerns, please email us before ordering

• ➤Fits Heat Surge brand electric fireplace
• [ 👉Blower Fan Dimension ] Total Length= 10", Depth = 3 1/2", Height = 3", Blower fan Size: Diameter 48mm x L:190mm; 1350W, 120V
• [ 👉 What You Get ] Included With Purchase – Replacement blower unit and heater coil
• [ 👉 Easy to install ] 2303 BTU's / 4606 BTU's ; Standard Setting Heats a 12' x 13' room. Motor UL Approved, Durable, Quiet and Efficient, Easy to install
• [ 👉Note ] The "Fits" BRAND and MODEL # Listed below are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order.

User questions & answers

Question:	Will this fit model adl-2000m-x
Answer:	Use the 37D0018. The attachment blocks are on the top, the 10002264 the block are on the bottom so it sits lower. Look similar unless you really compare them. Use Amazon ASIN # B00MV4EOIM.
Question:	will this fit Heat Surge model Y
Answer:	I would say it should. My fireplace is a heat-n-glow from 2002 and fit perfectly. If yours looks like this at the pilot light then it should work because the connections underneath are pretty universal.
Question:	I'm trying to find parts for my electric fireplace and I need a heating element for it
Answer:	Yes it will work
Question:	What is the best fireplace gas burner replacement
Answer:	Yes, the part number SRV10002264 is the correct pilot for the DVR333RN fireplace.

Product description

Complete Replacement Pilot Assembly for a Direct Vent Fireplace. Used by Superior/Lennox part number 69L17 (natural gas). This fits the Natural Gas Nova SIT Direct Vent valves. This includes the thermopile (main valve sensor), fine thread thermocouple (pilot sensor), ignitor wire and ceramic probe, and the pilot tube. This includes the bracket that goes next to the burner which holds it all together. Pilot tube, thermocouple, thermopile, and ignitor wire are about 24" long. Look at your bracket to ensure it is the same. This has a side mount bracket to attach it to the fireplace.

• Complete Replacement Pilot Assembly
• Natural Gas
• Side Mount
• IHP, Lennox, Superior, Astria

User questions & answers

Question:	Will this fit a superior model #dvr5-cmns
Answer:	I'm not qualified to answer that question.
Question:	Will this work with the Honeywell S8600 B ignition module
Answer:	No that is an electronic ignition set up. This is for manual lit standing pilot units.
Question:	Will this fit my ssdvt-3530cnm superior incert
Answer:	Your ssdvt-3530cnm fireplace used 2 different gas valves and the 69L17 was used on the models with the SIT Gas Valves. You will need to know what Gas Valve you have before ordering a Pilot Assy The Sit Gas valve have 2 knobs.. 1 knob with Off/Pilot/On and the other knob with A Hi-Lo adjustment. The Honeywell Gas Valve will has a Push Button ignitor in the middle of the Gas Valve with a Star on it
Question:	I have a superior/lennox direct vent fire place thats lp. i want to convert it to natural gas. the model # is dt500cmin. will the 69l17 work for this
Answer:	You will need to get a full conversion kit to change this unit between fuel types. Unfortunately this model was made before I started selling Superior and I don't have the conversion kits. If you Google search "Superior dt500cmin" the site Lennox Hearth Parts Store should come up. It looks like they should be able to help you with the full conversion kit.

• Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.
• Package Included: Valve, Thermocouple, Plastic Black Bakelite Knob
• Size: Thermocouple Length: 600mm/23.62inch; Head Tip: M8; Knob Diameter 44mm; "D" Insert for Valve: 6.0-6.1mm
• Application: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater
• CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread (Max BTU rating: 50000, Working Pressure 65 mbar)

User questions & answers

Question:	Is there any reason this can't be used with natural gas as well? i know the seller says lgp but has anyone tried it with ng without issues? thanks
Answer:	It's only 30inches. From the list of replies there is no consistency in this product. Might be returning it depending on how it fits my smoker.
Question:	Have a 50,000 btu fire table, but nothing says "low pressure" propane unit. if pics of control valve in example look like mine, can it work for me
Answer:	Try wayfair... they advertise a 42” cover for fire pits
Question:	Can this valve be used to replace valve on santos outdoor 56-inch rectangular propane fire table with tank holder by christopher knight home
Answer:	I returned mine because didn’t fit my gas fireplace
Question:	Is it difficult to replace this gas control cock valve and thermocouple in the fire pit
Answer:	The 55-796031501-00 Veranda Square Patio Fire Column cover fits fire columns 21"L x 21"W x 30"H.

Product description

Replacement for Heatilator: A36CH, A42C, A42CH, ADI60S, ADI-ZC-FB, ADI-ZCFB-S, BE36C, BE36CIPI, BV4236DBI, BV4842DBI, CB4236IR, CB4236MIR, CB4842IR, CB4842MIR, CD4236ILR, CD4236ILR-C, CD4236IR, CD4236IR-C, CD4236IR-C, CD4236LR, CD4236MILR, CD4842MILR, CD4236MIR, CD4842MIR, CD4236MLR, CD4842MLR, CD4236MR, CD4842MR, CD4236R, CD4842ILR, CD4842ILR-C, CD4842IR, CD4842IR-C, CD4842LR, CD4842R, CNXT70E, CNXT70E, CNXT70E, CNXT70E, EC36, EC36I, EC39, EC42, EC42I, FP28, FP36, GBi25 SERIES, GC100, GC100E, GC100L, GC100LE, GC150, GC150E, GC150L, GC150LE, GC200, GC200L, GC300 SERIES, GC300E, GC300LE, GC300FL, GC300FLE, GC300FLLE, GC300ST, GC300STE, GC300STLE, GC361, GC421, GC400 SERIES, GCBC36, GCBC36LE, GCBC42, GCBC42LE, GCBC60, GCBC60I, GCBC60IL, GCBC60L, GCBC80, GCBC80I, GCBC80IL, GCBC80L, GCDC36, GCDC42, GCDC60, GCDC60E, GCDC60L, GCDC60LE, GCDC80, GCDC80E, GCDC80L, GCDC80LE, GDST3831I, GGBC36, GGBC36E, GGBC36L, GGBC36LE, GGBC42, GGBC42E, GGBC42L, GGBC42LE, GGBC42R, GNBC30, GNBC30LE, GNBC33, GNBC33LE, GNBC36, GNBC33LE, GNDC30, GNDC33, GNDH30, GNDH33, GNDH36, GNDH36E, GNDH36LE, GNRC33, GNRC36, GNRC36, GNTC80, GNTC80, HB36, HB42, MAX60, MAX60-FFMAX1, MAX60-FFMAX2, MAX60L-FFMAX2G, MAXUS MAX60E, MAXUS MAX60EF, MAXUS MAX60F, MAXUS MAX60L, MAXUS MAX60LE, MAXUS MAX60LEF, MAXUS MAX60LF, MH36A, MH39A, MH42A, NA36, NA42, NB3630M, NB3630MI, NB3933, NB3933I, NB3933M, NB3933MI, NB4236, NB4236I, NB4236M, NB4236MI, NB4842, NB4842I, NB4842M, NB4842MI, NBV3630I, NBV3933I, NBV4236, NBV4236I, NBV4842, NBV4842I, ND3630, ND3630I, ND3630L, ND3630IL, ND3933, ND3933I, ND3933L, ND3933IL, ND4236, ND4236I, ND4236L, ND4236IL, ND4842. ND4842I, ND4842L, ND4842IL, NDV3630, NDV3630I, NDV3630L, NDV3630IL, NDV3933, NDV3933I, NDV3933L, NDV3933IL, NDV4236, NDV4236I, NDV4236L.

• L12.75" x W3.73" x H3.23" Motor Type: Ball Bearing Insulation Class H (rated to 392°F/200°C) Motor RPM: 3000 Airflow in C.F.M:110 Ratings:120V, 60Hz Power Consumption (watts): 31 3-prong Power Cord: Yes Power Cord Length (inches): 75 Rheostat Variable Speed: YES Magnetic Thermostat: YES Thermostat Temperature: Activate at 120°F / 50°C, shutoff at 90°F / 32°C Material: Aluminum + Galvanized Steel Packaging Materials: Shipping box, Bubble Wrap, Foam Certifications: Rheostat, Motor UL Approved.
• Replacement for Heatilator: NDV4236IL, NDV4842, NDV4842I, NDV4842L, NDV4842IL, NEVO3630I, NEVO4236I, NNXT3933I, NNXT3933IL, NNXT4236I, NNXT4236IL, NOVi30, NOVi30L, NOVi35, NOVi35L, OLYMPUS, SC60, SL-350TRS-IPI, SL-550BE, SL-550BE-IPI, SL-550TRS-E, SL-550TRS-IPI-E, SL-750TRS-E, SL-750TRS-IPI-E, TITAN;
• Replacement for Continental:BC36DFN, BC36DFP, BCDV33 SERIES, BCDV33NR, BCDV33PR, BCDV34 SERIES, BCDV34NT, BCDV34PT, BCDV36, BCDV36CFNTR, BCDV36CFPTR, BCDV36NTR, BCDV36PTR, BCDV40, BCDV42,SERIES, BCDV42N, BCDV42P, BCDV48 SERIES, BCDV48N, BCDV48P, BCNV36 SERIES, BCNV36N, BCNV36P, BCNV42 SERIES, BCNV42N, BCNV42P, CDV33, CDV33NR, CDV33PR, CDV34 SERIES, CDV34NT, CDV34PT, CDV36NTR, CDV36PTR, CHD35NT, CHD35PT, CHD40NT, CHD40PT, CHD46NT, CHD46PT, CHDX40NT, CHDX40PT, CLHD45N, CLHD45P;
• Replacement for Napoleon: B36DFN, B36DFP, BGD33, BGD33NR, BGD33PR, BGD34, BGD34-1NT, BGD34-1PT, BGD36, BGD36CF, BGD36CFG, BGD36NTR, BGD36PTR, BGD38, BGD38NT, BGD38PT, BGD40, BGD40-N, BGD40-P, BGD42, BGD42CF, BGD42N, BGD42P, BGD48, BGD48N, BGD48P, BGNV36, BGNV36N, BGNV36P, BGNV42, BGNV42N, BGNV42P, GD33, GD33NR, GD33PR, GD34, GD34-1NT, GD34-1PT, GD36, GD36MN, GD36NTR, GD36PTR, GD45, GVF36, GVF36N, GVF36P, GVF42, GVF42N, GVF42P, HD35, HD40, HD46, HDX40, HDX40NT, HDX40PT, ZCVF36, ZCVF42;
• Cross Reference Numbers: Blower Kit, GZ550, GZ552, HB-RB58, R7-RB58, P58L180, GD36NTR ; Replacement Universal Model Numbers: Blower kit GZ550, GZ552, R7-RB58 (Electric Motor Warehouse), HB-RB58 (ROTOM)

User questions & answers

Question:	How long have you been using it and how often? My last one only lasted 11 months before screeching
Answer:	I do not know. What I do know is as long as the new remote is the same model as the one being replaced, it will work. Simple pairing is still necessary before using it the firsts time. Make sure the batteries at the receiver are also working.
Question:	Blower motor did not come with a wing nut to secure it to the fireplace. What thread is the wing nut
Answer:	No, it wouldn't work with that model of receiver. ~Kind regards from The OnFireGuy Crew.
Question:	Does this fan work with the heatilator ndv4236i-b
Answer:	You can leave everything the same and add these two leads. You will need to make sure that your wall switch is in the off position when you are using the remote. If you don't have room to add the two leads, you can remove the wall switch leads and connect these. Please keep in mind that you can't use both the wall switch and the remote at the same time. If you have additional questions please let us know and we will be happy to help. ~Kind regards from The OnFireGuy Crew 866-727-4120
Question:	Looking for a blower for a goplus WH51075 electric firplace
Answer:	Typically its best to replace both and buy the kit but you can certainly buy just the receiver if your remote is in good working condition. The new receiver would have a pin hole "pairing" option to learn the existing remote control to if you choose. Here is a link to the receiver box only: https://www.amazon.com/SkyTech-SKY-1001-Receiver-Fireplace-Controls/dp/B077ZD6YD3/ref=sr_1_2?keywords=skytech+1001-a+RX&m=ANRRIZ5VJS050&qid=1571056655&s=merchant-items&sr=1-2

• Make sure you measure the size of your original parts and compare with ours BEFORE you order, Total Width (Does not include Heating Element) = 9.75", Depth = 3.73", Height = 3.23". Blower fan Size: Diameter 60mm x L:185mm. IR Heater size: L 200*35(mm). 1350W, 120V.
• Temp Switch: 105C / 221F
• Compatible with Twin Star brand electric fireplace and other Wood / Gas Burning Stove or Fireplace: 28E05, 28E05R, 23EF010GAA, 10QI071ARA, TS-001
• UL listed, Durable, Quiet.
• NOTE: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. Any questions or concerns, please email us before ordering.

User questions & answers

Question:	will it fit model dfs-950-6? (twinstarhome or duraflame
Answer:	this one works but i think it might not be the same as original it fit it works but doesn't seem to get as hot maybe it should have been a 1500 watt
Question:	Do you sell only the thermostat sensor
Answer:	part fits the heat surge elect. fireplace
Question:	twin-star quartz fireplace y15-s146-p01 heater/blower assembly do you sell replace for this unit
Answer:	I'm not really sure what the best gas fireplace burner would be but this electric when I wished I would have ordered the more wattage it doesn't work as good as the old one sorry I couldn't help you

Product features

Energy saving

1. The best choice for saving money
2. Protect the environment and start with energy saving

Warm and Comfortable

1. Enjoy a quiet, happy mood
2. Maintain a warm and happy life in the winter

High Air Flow

1. High efficiency operation of the fan
2. Keep your room warm and evenly heated