11 best master cool swamp coolers

Product description

The MasterCool Exterior Grill Cover is designed to cover the exterior of the MasterCool MCP44 Window Swamp Cooler during the off season.  It eliminates the need to uninstall the unit when not in use.  

User questions & answers

Question:	What are the dimension of the cover
Answer:	44x33x11 inches
Question:	What are the 12 x 12 x 29 dimensions? Are these shipping dimensions
Answer:	Not sure where you got 12 x 12 x 29 but the description says 29 inches by 144 inches. So 29 inches for the length of the rolled up pad material, and when you unroll it, it is 144 inches long. Guess maybe when it is rolled up, it might measure 12 inches in diameter?
Question:	How thick
Answer:	Once you let if fluff up, it is about an inch thick. I try to use two layers in my cooler, but one will work.
Question:	How thick is the pad
Answer:	Roughly 1/2 in
Question:	How often do these pads have to be changed
Answer:	My area has horribly hard water...and I don't have a filter... So I have to change every year
Question:	Will these fit a mastercool asa7112 model
Answer:	I am not familiar with that model, sorry.
Question:	Why can't you ship to me? I receive packages all the time. Even bought a range on line
Answer:	Correct your shipping address with Amazon would be my guess
Question:	will it fit Adobe Air master cool model #HPC440C
Answer:	you may have to trim some. but it should work. I have an older master cool. I had to use the supplied shims and light trimming
Question:	Amazon states that this can't ship to California. Why is there this limit
Answer:	California is very strict on chemicals shipping into the state , if product has one in it , it can not be shipped in via normal carriers
Question:	Do they fit the Bonaire Durango coolers
Answer:	They are designed specifically for the MCP44 and MCP59 MasterCool coolers.
Question:	How is cleaning of pads accomplished? I have found substantial dirt and hard water build up over time
Answer:	We recommend white distilled vinegar and water. Do a half and half mixture. Spray the pads down. wait a few minutes then rinse with low pressure water hose. That will help remove some of that mineral build up.
Question:	Does the pads come with the attachment hardware
Answer:	It comes with different type of pins to anchor. They don't work like the original. And another note ... these filter pads do not fit the Durango air cooler, they are too small.
Question:	How long does it take to get rid of the bad order the pads emit
Answer:	Set pads in frame, but wait to attach frame to cooler. Spend ONE day squirting (every few hours) water hose & dishwashing liquid on the pads/frame, rinsing thoroughly each time. Next day smell nearly gone! Ready to install.
Question:	There is a difference in the supplied answers. Is the product or is it not appropriate for home humidifiers
Answer:	I asked the manufacturer....they said they hadn’t tested it for a humidifier. I’ll use the one I purchased on our humidifier.
Question:	Does it really take 1-3 months for shipping
Answer:	It didn't take that long for mine, but that was 3 or 4 yeaes ago.
Question:	can this be used on a hot water line for a humidifier
Answer:	I guess you can if you can adept it.
Question:	How often does this item need to be changed out
Answer:	Depends om quality of your water, I change mine yearly/annually.

Product features

MasterCool Universal Rigid Media Set (MCP44-PAD)

Keep your evaporative window cooler performing at optimal levels with this rigid media pad set. It is constructed using MasterCool’s premium CELdek media. The unique, multi-layer design ensures a perfect fit. Each set includes 1 center pad and 2 side pads.

GREENGUARD Certified by Munters

With your health in mind, MasterCool's CELdek evaporative cooling pads have been tested for over 360 individual chemicals of concern, guaranteeing no harmful emissions are present.

The tests have been performed according to one of the most stringent product emissions standards in the world. Annual testing of all products is required to maintain this certification.

To remain healthy, people need healthy indoor air. It’s as simple as that.

Product description

Window Evaporative Cooler, Air Flow 3200 cfm, Average Coverage Area 1000 sq. ft., Drive Type Direct, Pad Thickness 2 In., 1/3 HP, 3.7 Amps, Evaporative Cooler Voltage 115VAC, Pump Voltage 115, Power Cord Length 5-1/2 ft., Number of Speeds 3, Water Capacity 2.0 gal., Fill Type Water Connection Required

• Drive: With; Air Flow: 3200 cfm; Drive Type: Direct

User questions & answers

Question:	What kind of cooler is this? an evaporative cooler? or a dehumidifying cooler? or just a fan? and how much electricity does it use? thank you
Answer:	Evaporative

Product description

Keep the air around you cool inside and outside your home. With the Hessaire Portable Evaporative Air Cooler, you can stay cool inside your home, out on your patio, or at your campsite. Just plug it in and you're ready to chill. Evaporative coolers are more commonly known as "swamp coolers." These air cooling systems cool warm, stale air with natural evaporation. As water inside the swamp cooler evaporates into the air circulating through the cooling system, the air lowers in temperature. Evaporative wet air coolers are ideal for areas with low humidity since water must be able to evaporate easily. The MC37M air cooler can cool areas as large as 950 square feet. The fan draws air in and circulates it back out at a rate of 3,100 cubic square feet per minute. This portable swamp cooler has a 10.3-gallon water reservoir that you can fill through the cooler's manual water fill or through your garden hose connected to its water hose adapter. Get the cooling you need thanks to 4 fan-only settings and 2 evaporative settings. The air vents also oscillate to direct air throughout your room or space. This portable evaporative cooler moves where you need it thanks to its lightweight design, heavy-duty wheels, and convenient handle. Incredibly mobile, this portable swamp cooler weighs only 40 pounds and measures 25 inches long, 17 inches wide, and 37 inches tall.

• Cool the air inside your home, out on your patio, or at your campsite with this portable evaporative air cooler
• Uses water evaporation to cool warm, stale air and circulate cool, refreshing air in a 950 square foot area at a rate of 3,100 cubic square feet per minute
• Eco-friendly method of air cooling that uses only the water in its 10.3-gallon water reservoir
• Features a manual water fill and an adapter for your garden hose for continuous running, 3 fan-only settings, 2 evaporative settings, oscillating air vents, and an 8-hour timer
• Weighs only 40 pounds when empty and is extremely portable with 4 heavy-duty wheels and convenient handle

User questions & answers

Question:	is this returnable
Answer:	Yes
Question:	Can i put tap water in it
Answer:	I wouldn't piggy back power strips. That is a hazard.
Question:	Can I attach a hose to it
Answer:	No USB ports on this item
Question:	Removable filterpads? Can they be cleaned or do you purchase new ones
Answer:	It depends on the strength of surge as this product comes with 245 Joules surge protector.

Product description

With a front discharge, this MasterCool Window Evaporative Cooler with Remote Control is easy to mount with no duct work, sheet metal cutting, or grille assembly.Its simple-to-operate touch control panel includes a remote for convenience. The 2” cellulose pad helps provides superior performance and maximum cooling efficiency compared to standard pads. In addition, the pad is UL Certified to GREENGUARD standards based on comprehensive emission criteria. The cooler has a narrow outside profile of 10” while the body of the unit is made of UV-resistant polypropylene, which helps ensure it is lightweight and weather-resistant. UL Listed. Suitable for dry, arid climates.



Item: Window Evaporative Cooler

Drive: With

Air Flow: 4000 cfm

Evaporative Cooler Cooling Capacity: 2000 sq. ft.

Drive Type: Direct

Motor HP: 1/2

Evaporative Cooler Voltage: 115

Evaporative Cooler Item: Window Evaporative Cooler

Blade Dia.: 16"

Speed: 3

Amps: 3.34/0.9/ 0.9

Discharge: Front

Width: 33-5/8"

Depth: 22-1/8"

Height: 46-1/8"

Grille Width: 21-5/8"

Grille Height: 21-5/8"

Duct Opening Length: 21-5/8"

Duct Opening Width: 21-5/8"

Media: Rigid

Pad Thickness: 2"

Pump Voltage: 120

Power Cord Length: 7 ft.

Water Connection: 1/4"

Water Capacity: 3 gal.

Fill Type: Hose

Operating Weight: 100 lb.

Material: Plastic

Finish: Matte

Color: White

Includes: Remote Control

User questions & answers

Question:	Where can i find replacement for the hose connector on my mobile master cool
Answer:	Hi, Deana. Thank you for your question. Please give our Customer Service Team a call at 800-643-8341, and they would be happy to assist you with a replacement order. Office hours are Monday through Friday, 7:00 am - 5:30 pm CST. Thanks. - Sydney, Essick Air Products
Question:	Can I buy just the motor for the cool master swamp cooler portable
Answer:	Anon, This unit has 1145 CFM's. - Thank You
Question:	Whats the CFM for this unit
Answer:	Hello, Dorothy! We do not manufacturer parts for coolers made by Adobe Air. Parts for our MMBT12 are not interchangeable with your Adobe AP056277 model. Thanks! -Melissa, Mastercool
Question:	I need replacements pads for a mobile master cool patio cooler AP056277. Where can i buy them
Answer:	No, it doesn't.

Product features

MMBT12 Portable Evaporative Cooler

This innovative Evaporative Cooler is an ideal way to cool patio and deck spaces, garages and workshops. This unit cools up to 600 sq. ft. and utilizes polyester media pads for higher efficiency.

It features analog controls which allow you to make precise adjustments as needed. The heavy duty casters and handles make for convenient portability. This powerful cooler comes with a 1/3 HP motor and features a 4-way directional grille with adjustable vents to help ensure that cool air is delivered where it is needed. This evaporative cooler performs best in dry, arid climates.

About Evaporative Cooling

Evaporative cooling is one of the oldest, simplest and most natural methods of cooling. This process occurs when hot, dry air passes over a body of water. The air cools by absorbing moisture, which results in cooler air temperatures.

Unlike traditional air conditioners, evaporative coolers replace warm indoor air with fresh, cooled air through various methods of outside access, such as an open window or door.

Benefits of Evaporative Cooling

When you combine natural cooling with an efficient air moving system, a steady breeze can lower indoor temperatures by as much as 30°F. Plus, evaporative cooling reduces static electricity, protects fine furniture and wood flooring, and reduces symptoms caused by dry air, such as itchy eyes, throat, or skin.

Polyester Media Pads

Evaporative coolers have a variety of media pad options available. Polyester Media Pads are made from random fiber distribution. The fibers are laid in all directions in a web-like design to create a unified media. This offers more cross-over points which help trap dirt and particles.

Product description

Evaporative cooler, window, cfm 2800, propeller dia 9 in, direct drive, 2 speed, voltage 115, discharge front, grill, operating weight 95.9 lbs, power cord Length 6.9 ft, includes printed manual, Float, hose thread overflow

User questions & answers

Question:	Will it fit a window width of
Answer:	Yes!
Question:	Have heard this is not allowed for delivery to California. What is the reason why
Answer:	Yes! We offer a limited lifetime warranty for all of our shields.
Question:	What is the dimension of the unit outside the wall? It says the depth is 31", but how much of that is outside
Answer:	Yes, and it’s because of the Face ID sensors needing to work properly
Question:	does it come with a motor
Answer:	This protector fits the late 2018 12.9" iPad Pro. I have one on mine. It is for the face recognition model, not for the earlier fingerprint model. It has a notch for the front facing camera. It DOES NOT cover up the camera and DOES NOT interfere in any way with face recognition (you have to put it on in the right direction of course). I use face recognition with this screen protector on my 2018 12.9" iPad Pro many times every day, with never a problem.

Product description

A digital thermostat is a convenient way to control your MasterCool ducted evaporative cooler. This MasterStat digital thermostat is designed to operate a 2 fan speed motor, water pump motor, and water purge pump (optional). It has a backlit LCD display which makes reading temperatures easy. In case of a power outage, this thermostat stores your last active control settings so your cooler will not need to be reprogrammed. The pre-wet mode ensures the media pads are fully saturated prior to the pump being activated. Minimal wiring is required when installing this thermostat into your existing outlet box. A rain proof control box is included for your convenience. MasteStat is a registered trademark of Champion Cooler Corporation. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Designed to control any ducted evaporative cooler with a 2-speed motor up to 1 HP at 120-Volt or 2 HP at 240-Volt
• Onboard sensor has a control range of 50 to 90 Degrees F; Outputs provided are auto/manual, pump, fan and timer modes
• If power is interrupted while unit is operating, the unit will resume in the mode active during power loss; Rain proof control box included
• Kit includes wall control thermostat, 2-speed control, wire nut for common earth connection; spare 3.15-Amp fuse for control, jumper wire for link to N-link; Easy to install in an existing outlet box - minimal wiring required
• Compatible with MasterCool ADA51/71, ADA5112/7112, ASA51/71, ASA5112/7112, AUA51/71, AUA5112/7112, all AD1C-contractors series, all AS1C-contractors series, all AU1C-contractors series, all AD2C-contractors series, AS2C-contractors series, AU2C-contractors series; Compatible with UltraCool ADA50/70, ADA50-12/70-12, ASA50/70, ASA50-12/ASA70-12, AUA50/70, AUA50-12/70-12 ada, ADA51/71-series, ADA5

User questions & answers

Question:	How do I make a request for the 2 speed
Answer:	These are lightweight and only should be used to go around an air conditioner. NOT for securing a load
Question:	Will this unit replace the original CC2000B evaporative cooler control kit
Answer:	Yes - they are 17 ft long - they go completely around a big cooler.
Question:	can this be programmed? as turn on pump only for 5 min, then fan on until desired temps
Answer:	I don't. Try Amazon.
Question:	Where is the fuse located? In the controller box or in the thermostat or in both? Where can I purchase them
Answer:	Aren't those the dimensions in its title? 34"wide x 28" depth x 40" height

Product features

MasterStat Thermostat

The MasterStat digital thermostat is designed to operate a 2-speed fan motor, a small water pump motor, and an optional water purge pump. It has an easy to read backlit LCD display. It also features a pre-wet mode to ensure your pads are full saturated prior to the pump being activated.

Product description

Hessaire’s MC37M is the best and most effective cooler on the market, for its size. It’s compact and yet packs a powerful blast of cooling with a patented winged prop design and three panels of high-density rigid media. Take it on the go easily with its four casters. It features oscillating louvers to cover a wide area quietly and efficiently. The manual controls make it easy for you to adjust between the four temperature settings to obtain optimal cooling anywhere you take the MC37M Evaporative Cooler. Cooling the air is only a part of the process; propelling the chilled air into your space is what brings you needed relief. Specially engineered features from Hessaire allows this mobile evaporative cooler to provide an airflow of 3, 100 CFM to your area. Proprietary fan propeller design with winglets throws the blast of cool air further and yet is very quiet. Additionally, the air swing delivery system moves cool air left to right across the room to ensure that air is evenly distributed. Key Operational Points: Pump must be primed per instructions prior to use. Your cooler must be positioned in front of an open window or door if it is to operate effectively. Always ensure that there is another open window or door through which the air can exhaust from the room. Ensure the filter is kept clean throughout the summer season. At the end of each day run your cooler on FAN ONLY for 30 minutes to dry out the filter Prior to putting your cooler away for winter, always: a. Drain the tank and wipe out clean. b. Clean the filter c. Reassemble and run on FAN ONLY for 30 minutes to dry out the filter. Assembly Required: Hessaire Coolers are pre-assembled and ready to operate. Simply remove the packaging and then carefully remove the unit from the box. Install Casters. Lock the 2 locking wheels before filling and turning on fan to keep the cooler from moving from the air velocity. Wheels, casters and any other components for assembly are nested at the bottom of the unit.

• PORTABLE - 4 heavy duty locking casters for cooling home, patio or workshop spaces up to 950 square feet
• COMPACT YET POWERFUL – 37x17x24 inches; 3, 100 Cubic Feet per Minute (CFM); 3 fan speeds and oscillating louvers to ensure even distribution, wide coverage and comfort
• EASY TO OPERATE & SIMPLE TO MAINTAIN – 3 simple rotary controls allow the fan (Off, Hi, Med, Low), pump (On, Off) and oscillation motor (On, Off) to be controlled independently
• MANUAL & CONTINUOUS FILL – Utilize the Continuous Fill option by attaching a household hose with the included float adaptor, eliminating the need to manually watch and fill the water tank
• SUPERCHARGED, ECONOMICAL COOLING – 3-sided rigid high-density cooling pads for increased evaporative surface area generating cooler air
• Power source type: Corded Electric
• Voltage: 115 volts

User questions & answers

Question:	can I use regular tap water for this product? How many hours does it work if I fill up the tank
Answer:	Yes, nobody would be able to buy enough distilled water to run this if that were required. It uses a good bit of water..how much is dictated by how high you run it. I can easily get about 10 or 12 hours out of a full tank if run on low.
Question:	Will this unit work in southwest Florida where the humidity is high
Answer:	No!! These are completely dependent on humidity differentials. I've read tons of reviews and background. They'll work to some degree as long as the relative humidity is less than 100%, but you're probably better off with a non-evaporative cooler in Florida. They work like crazy in desert areas, but even then, they can only do a max of about 20'F difference from outside temp. They might work okay in concert with a traditional central air system, since that actually de-humidifies the inside air. But I don't know.
Question:	How quiet is it
Answer:	Not quiet at all. It's quite loud with the noises from the pump and fans.
Question:	How far does the air flow
Answer:	I have ours on low and it cools from the garage door to the home door on the opposite side of the room. Very amazing

Product features

Hessaire MC37M Portable Evaporative Cooler

PORTABLE - 4 heavy duty locking casters for cooling home, patio or workshop spaces up to 950 sq ft.

COMPACT YET POWERFUL – 37x17x24 inches; 3,100 Cubic Feet per Minute 3 fan speeds and oscillating louvers to ensure even distribution.

Hessaire MC37 - Frequently Asked Questions

Q: Where are the wheels and castors that should come with this unit?

A: They are in a nested compartment with a cover you need to remove on the bottom of the unit.

Q: Why doesn’t it cool right away? I just plugged it in but it’s not cooling.

A: You need to fill the water compartment to full to allow the water pump to prime. Once that happens, it will begin to cycle the water and within 15 minutes will be cooling efficiently.

Q: Is this a portable A/C unit?

A: No, this is an Evaporative Cooler that uses water and a fan to cool the ambient air. It’s also known as a portable ‘swamp’ cooler.

Q: How many hours can this unit continuously cool after I fill the water reservoir?

A: The MC37V can cool up to 4 hours on one tank full. I usually check my unit every hour to make sure I am good. If you just want to ‘set it and forget it’, you can hook up the unit to your garden hose and the float valve will keep the unit continuously filled.

Product description

The compact and portable OEMTOOLS 3,100 CFM Evaporative Cooler out-performs even much larger coolers. It is energy-efficient, quiet, and provides best in class cooling, and coverage, throwing cool air farther than other coolers its size. Evaporative coolers work by pulling hot surrounding air through wet media panels, where the air is cooled through the process of evaporation. The powerful 1/5 HP fan of this unit then pushes the cooled air at 3,100 CFM into the surrounding area—cooling spaces up to 950 square feet. The 3 XeL50 media panels (instead of a single panel found on most mobile coolers) provide more air-intake area and reduce pre-rotation of the air to the propeller, which translates into lower static pressure and more efficient air delivery to the propeller. These 3 high-density media panels also provide 80% more evaporation surface than regular density media, ensuring higher evaporation efficiency and longer life. Evaporative coolers are not air conditioners, thus they use much less energy, saving you enormously in electricity costs—plus they work fantastically in uninsulated spaces, and even in workspaces with open garage bay doors. No other air-conditioning alternative offers these benefits.



SPECIFICATIONS:

- Cools 950 Square Feet.

- Oscillating Design Allows Broad Area Coverage and Added Comfort

- 1/5 HP 3 Speed Motor

- Patented Axial Propeller is Energy Efficient, Quiet, and Throws Cool Air Farther

- Molded with UV Resistant Polypropylene Resin, Creating a Strong yet Lightweight Design Suitable for Outdoor Use

- Direct-Connect-to-Hose Feature Enables Constant Water Supply Option to Avoid Having to Fill Water Tank

- Water Capacity: 10.3 Gallons

- Large Casters for Mobility

- GFCI Plug for Outdoor Safety When Exposed to Moisture or Rain

- Dimensions (in.): 37" x 17" x 25"

- Weight: 39 Lb.

• COOL DOWN YOUR WORKSPACE: One OEMTOOLS 23976 Evaporative Cooler can cool an area up to 950 square feet, and provides 3,100 CFM of air delivery. With its built in oscillating louvers with swing function, this portable cooler provides MAXIMUM coverage and air circulation.
• SAVE MONEY: Evaporative air coolers are more energy efficient than air conditioners—especially in uninsulated spaces—and more effective than fans alone. They provide the most cooling power for the lowest electrical cost.
• WORK COOLER, WORK BETTER: When a workspace is too hot, it creates problems with safety, production accuracy, and employee morale. OEMTOOLS Evaporative Cooling Systems keep your workspace at a pleasant temperature, improving your workers’ experience and the quality of your work.
• POWER AND PORTABILITY: The Evap Cooler energy efficient cooling system comes with large casters for ultra-portability. OEMTOOLS Evaporative Coolers use 3 high-density media panels, which provide 80% more evaporation surface the average competitor’s solution.
• FULL SPECIFICATIONS: 1/5 HP 3-speed motor; Cools 950 sq. ft.; Oscillating design; Patented axial propeller is more efficient and provides better coverage; Molded with UV-resistant polypropylene resin, suitable for outdoor use; Direct-connect-to-hose feature enables constant water supply option; Large casters for mobility
• 3100 CFM

User questions & answers

Question:	where can I get parts
Answer:	From oemtools in Memphis
Question:	Does this product have a built in float? So the water tank stays full
Answer:	Yes
Question:	How noisy is this unit? Could it be used at night in bedroom without disturbing your sleep
Answer:	It’s not silent. On low it runs at 68 dB. I would not use it for this purpose but some people like the steady hum of a fan at night.
Question:	Can you add ice to make it colder
Answer:	I don’t think so

Product features

OEMTOOLS Evaporative Cooler

The OEMTOOLS Evaporative Cooler is compact in size, but it out-performs coolers that are much larger. It is energy-efficient, quiet, and throws cool air farther. Three XeL50 media panels (instead of a single panel found on most mobile coolers) provide more air-intake area and reduce pre-rotation of the air to the propeller, which translates into lower static pressure and more efficient air delivery to the propeller. The 3 high-density media panels provide 80% more evaporation surface than regular density media, ensuring higher evaporation efficiency and longer life plus maximum cooling for up to 1,600 square feet. Evaporative coolers are not air conditioners, thus they use much less energy – and you save more on electricity costs!

Product description

This multifunctional product is used most often to create a cooler and cleaner air flow in work stations allowing equipment to not only work faster but more efficiently while also helping to extend its life. Technicians have used these units as a cooling mechanism for shop equipment such as recycling machines and vacuum pumps because of their high volumes of air output. Furthermore, these units have been used in such applications as drying floors, carpets and paint.

SPECIFICATIONS:

• 120 Volts, 60 Hz

• Rated Power: 2.0 Amp

• Moves air up to: 1200 CFM

• For indoor or outdoor use

• Variable Speed Switch Controls Motor Speed: 950-1650 RPM

• Built-in Overload Protection

• (2 pcs) 11 Amp Built-In Grounded Receptacles

• Housing Material: Impact Resistant ABS

• 8.5 ft. Cord Length, SJTW 14AWG

• 4-position adjustment feet

• POWERFUL VARIABLE SPEED SWITCH controls motor speed from 950 to 1650 RPM
• IMPACT RESISTANT ABS provides extra durability
• BUILT-IN GROUNDED RECEPTACLES have the ability to run other equipment
• VERSATILE DESIGN allows for use in a variety of applications both indoor and outdoor
• CREATE A COOLER AND CLEANER AIR FLOW in work stations allowing equipment to work faster and more efficiently

User questions & answers

Question:	Change to 220v ? Possible
Answer:	SHOULD BE 240 WATTS
Question:	How many watts does it use. I would use this attached to a portable generator
Answer:	Please contact Mastercool Technical Service at 973-252-9119, so we can give you the exact measurements you need. Thank you, Mastercool.
Question:	What is the size of the fan/blower (not the unit
Answer:	Hello, These fans are not designed to be stacked and we do not recommend anything that may cause the unit to malfunction. If you would like to speak with one of our Mastercool Technicians about this, you can contact Mastercool at 973-252-9119. Thank you.
Question:	Are these stackable
Answer:	Hello! You can purchase replacement parts for your cooler directly from us. Our contact information is located on the cooler and in the owner's manual. -Thanks! Melissa, Mastercool

Product features

Mastercool 1200 CFM Blower Fan

This multifunctional product is used most often to create a cooler and cleaner air flow in work stations allowing equipment to not only work faster but more efficiently while also helping to extend its life.

Technicians have used these units as a cooling mechanism for shop equipment such as recycling machines and vacuum pumps because of their high volumes of air output. Furthermore, these units have been used in such applications as drying floors, carpets and paint.

1200 CFM BLOWER FAN

The powerful variable speed switch controls the motor speed (950-1650 RPM) for quick cooling and drying. The high volume of air output makes this unit useful for a variety of applications.

Mastercool's 1200 CFM blower fan comes with built-in overload protection and 11 AMP built-in grounded receptacles to run other equipment.

Durable and Portable

Mastercool's 1200 CFM blower fan is made with impact resistant ABS to provide extra durability. This material also makes it convenient to use in both inside and outside applications.

The four position adjustment feet make it easy to set up on any surface while the large handle and lightweight design makes it easy to transport.

Product description

This MasterCool exterior grille cover is engineered with durable polyester, which protects your evaporative cooler from anything Mother Nature can manage to send its way. The washable fabric is easy to maintain and prevents pollen & other debris from entering into your home. For best results, pair it with the MasterCool interior grille cover. MasterCool is a registered trademark of Champion Cooler Corporation. WARNING: This product can expose you to chemicals including benzene which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Elastic edge for secure fit
• Creates a weather resistant barrier to prevent cold air, dust & dirt from entering your home when cooler is not in use
• Washable fabric for convenience
• Measurements: 44 in. x 33 in. x 11 in
• Compatible with: MCP44, MCP44E, WPL44, WPL44NP & MCP59 evaporative coolers

User questions & answers

Question:	How 2 tighten the cover around the back @ the bottom? MANUFACTURED screw holes holding the cooler to the wall don't allow cover to be cinched in back
Answer:	It's nylon type material and is water resistant but I don't know if it is water proof. You could probably spray it with a waterproofing spray. We have not had any measurable rain yet to give you a more accurate response.
Question:	Is it waterproof? Description says air, dirt and dust.... I would assume it's waterproof, but I've learned better about assuming things on Amazon
Answer:	Hello! No, this cover is not insulated. It is made of heavy duty canvas material. Thanks! -Melissa, AIRCARE
Question:	Is this cover insulated
Answer:	No it is not insulated.
Question:	Is this cover insulated
Answer:	No

Product features

MasterCool Exterior Cooler Cover

This exterior cooler cover is manufactured using a durable polyester which is designed to protect your evaporative cooler from the elements. This fabric is washable to ensure easy maintenance. It also prevents pollen and other debris from entering your home.

For best results, use with the MasterCool interior grille cover.

Product description

' Ducted Evaporative Cooler, Drive Without, Air Flow 5400 to 7000 cfm, Cooling Capacity Up to 2200 sq. ft., Speed 1 or 2, Motor HP 1/2, 3/4 or 1, Voltage 115, Discharge Down, Width 42 In., Depth 48 In., Height 34-5/8 In., Duct Opening Length 19-3/4 In., Duct Opening Width 19-3/4 In., Media Rigid, Pad Thickness 8 In., Pump Voltage 115, Power Cord Length 8 ft., Water Capacity 8 gal., Fill Type Manual Fill, Operating Weight 263 lb., Color Cool Sand '

• Price For: Each Media: Rigid Power Cord Length: 8 ft. Voltage: 115 Drive: Without Item: Ducted Evaporative Cooler Pump Voltage: 115 Discharge: Down Color: Cool Sand Speed: 1 or 2 Fill Type: Manual Fill Width: 42" Pad Thickness: 8" Air Flow: 5400 to 7000 cfm Motor HP: 1/2, 3/4 or 1 Height: 34-5/8" Depth: 48" Operating Weight: 263 lb.
• Duct Opening Width: 19-3/4" Duct Opening Length: 19-3/4" Water Capacity: 8 gal. Cooling Capacity: Up to 2200 sq. ft. Country of Origin (subject to change): United States