12 best bluetooth adapter for tvs

Product description

TX mode:

In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.

RX mode:

In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone, and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone.

NOTE：

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)

What is In the Box:

1 x TaoTronics Bluetooth 5.0 2-in-1 Adapter (Model: TT-BA07)

1 x 3.5mm Audio Cable

1 x 3.5mm Female to 2 RCA Male Cable

1 x USB Charging Cable

1 x User Guide

• LOW DELAY: Low Latency for High-fidelity Stereo Sound, lag-free content streaming in transmitter mode. Low Latency supported Bluetooth headphones/speakers are required.
• MAKE IT TWO: Upgraded 2-in-1 Bluetooth V5.0 transmitter can be paired with two Bluetooth receivers (like headphones + speakers) simultaneously. Note: Low Latency does NOT support Dual Link mode.
• ALWAYS ON: TaoTronics Bluetooth 2-in-1 Adapter continuously streams even while charging. Built-in battery for up to 10 hours use - enjoy your favorite wireless content all the time.
• BLUETOOTH EVERYWHERE: In Transmitter mode, turn a non-Bluetooth TV, PC, CD player, iPod, MP3 / MP4 into Bluetooth transmitter. Receiver mode: Ideal for home or vehicle music streaming sound system.
• PURE SOUND: high definition codec for a richer and deeper sound experience. Listen to CD-like audio quality at no compromise. Plus, 12 + 18 month extended warranty and 24/7 friendly customer service

Product features

TaoTronics Bluetooth 5.0 Transmitter & Receiver

Unlock the full potential of your devices with TaoTronics Bluetooth 5.0 transmitter, adopting Low Latency technology to deliver high-fidelity stereo sound with no delay. Confidently & seamlessly stream music from your phone/tablet to wired headphone/speaker.

Bluetooth 5.0

Ensures stable transmission to Bluetooth devices from up to 10m/33ft.

Play While Charging

Safely charge the transmitter & stream music for long periods.

One Button Control

Easily switchbetween transmitter (TX) & receiver (RX) mode.

Product description

As a Bluetooth transmitter, works by turning any non-Bluetooth audio source (TV, PC )into Bluetooth-enabled devices so that you can enjoy wireless audio with Bluetooth headphone.

1.Plug the device into the USB port for power supply (charger/TV/computer), the device will automatically turn on, and the screen will display "TX-Searching".

2.Plug the 3.5mm audio cable into the device, and plug the other end of it into the device's audio output interface.

3.Set your Bluetooth audio device to the pairing state, this product will automatically search it and display it on the screen.

4.Short press the left and right function keys to find the device you want to connect, select the connection.



As a Bluetooth receiver, works by turning your non-Bluetooth audio devices into Bluetooth-enabled devices so that you can play music through your smartphone via Bluetooth.

1.Plug the device into the USB port for power supply (charger/TV/computer), then the screen will display "RX-Searching".

2.Plug the 3.5mm audio cable into the device, and plug the other end into the playback device.

3.Turn on the Bluetooth function of the phone on computer, find the device named and pair it. After the pairing succeed



Function:

✰Wireless audio receiving and transmitting in one;

✰Built-in noise reduction HIFI sound quality;

✰Transmission signal distance: 10m;

✰Fully compatible with automatic matching; ✰Input interface: 3.5mm;

✰Input voltage: DC/5V;

✰Support hands-free calling

✰LCD screen display

✰No need to drive, plug and play;

✰No internal battery, external power supply;



Package includes:

1x wireless audio receiver transmitter

1x 3.5mm audio cable

1x charging cable

1x manual

• ✅【2-IN-1Bluetooth 5.0 Transmitter & Receiver Mode】Portable USB Bluetooth 5.0 Audio Transmitter Receiver can transmit stereo Audio from your non-Bluetooth Audio sources such as TV, MP3, CD player, PC or book Reader to your Bluetooth-enabled headphones, speaker or other receiver, and also can make your non-Bluetooth devices such as headphones, speaker receive the audio from Bluetooth Audio sources, such as mobile phone etc.
• ✅【Visual Screen】Adopt unique visual screen design,will show whether the product is in TX mode or RX mode,it is convenient to choose the Bluetooth devices to connect.In the transmission mode,it can search and display 8 nearby wireless devices for you to choose to connect,the operation is more intuitive and convenience to connect devices.
• ✅【Plug & Play】Bluetooth transmitter and receiver without installing any external driver.When used as a transmitter, please adjust your Bluetooth headset or speaker to adjust the volume, when used as a receiver, hold long press UP button or Down button to volume control.(Requires USB plugged in power to power the device)
• ✅【High Sound Quality】A2DP support voice prompts, Bluetooth aux equipped with Bluetooth technology 5.0 and delivers high quality audio and offers you 30 feet operation range with good performance, gives you a good experience when watching late-night shows.
• ✅【Extensive Compatibility】The receiver transmitter can be directly used for PC via USB. Using the included 3.5mm cable, this transmitter adapter can be widely used in TV, car stereo, home stereo, headphones, etc. (requires USB plugged in power to power the device)

User questions & answers

Question:	can it play two phones at a time
Answer:	Yes, in theory. I initially (7/17) had mine connected to a an AUX port on my bedroom Vizio, set to transmit. I connected it to two Chinese BT headphones and it went over 5mo without the battery dying since day 1. Keep in mind, it only charged while the tv was on. However, I am now using it in receiver mode and I am having trouble with charging. I don’t know if one mode uses more/less power than the other (battery only power). Also, idk the power rate required to charge (not in use) and the minimum rate(s) to transmit or receive. In my experience, using my Tv has enough or more than enough to keep a full charge in transmit mode. So I would highly recommend this usage if you have the same brand.
Question:	Will it work with Bose q35 headphones
Answer:	It's one SPDIF or the other SPDIF on but not both on at the same time.(No Pass through). 1. RX mode - Bluetooth source signal sent from phone to this device and OUT analog(3.5) or SPDIF Port.(The SPDIF IN port is off). 2. TX mode - Source is sent through SPDIF or Analog(3.5) IN to this device and out via Bluetooth to Speakers/Headsets.(The SPDIF OUT port is off). Depending on your setup/components you can definitely use a powered splitter inline ahead of this device. I use this device in TX mode only to send a wireless signal to our headphones. It works great! In my setup I have the SPDIF source signal coming from the TV down to a powered splitter that sends a signal to both my Stereo Receiver and this unit. I can mute then the Receiver and listen to the Headphones without issue. https://www.amazon.com/J-Tech-Digital-Premium-Quality-Splitter/dp/B00HQ2R314?ref_=bl_dp_s_web_2529702011
Question:	Can i use this to connect my desktop to my smart tv
Answer:	I had a different experience. I own taotronics tt-ba09, trond bt-duo x and avantree audition pro headphones, all of which claim to support aptx low lantency. Here is my testing result: a) When I paired either of the two transmitters with avantree headphones, the latency was minimum, and the white light on headset indicated aptx LL active. Obviously both taotronics and trond support aptx low LL in the TX mode;b) I paired taotronics in TX mode with trond in RX mode – NO LAG either;c) Then I made the switch and paired trond in TX with taotronics in RX. The lag suddenly became very noticeable.  The conclusion seems quite obvious that taotronics tt-ba09 doesn't support aptx LL in RX.
Question:	Can I use this to hook my old blu-ray player to my wireless bluetooth headsets
Answer:	It does not have that capability, works well on one Bluetooth item at a time.

Product description

Do you like to watch TV program at late night ? carpuride Bluetooth Transmitter can letting you freely enjoy the late night TV program without disturbing your family members. The upgrade version bluetooth transmitter can pair with two bluetooth headphones/speakers simultaneously to allow two person enjoy nice sound together.





Important notes:

1. Bluetooth transmitter can not pair with your mobile phone, iphone or ipad, as they are with different Bluetooth protocols. It can only be paired with audio stream device, bluetooth headset or speaker (ps: The smart phone or iPad is not speaker and this is a transmitter not receiver).

2. If you use the product on TV, please confirm which RCA interface is the audio output port. The device needs to connect the audio output port instead of audio input port.

3.Tx9 transmitter does not work on samsung smart TV.



Pairing:

1. Plug this product into your PC/TV or laptop's USB port or power bank to provide power for it

2. Connect the product to the TV with audio cable ( Note: 3.5MM audio output port or RCA audio ouput port )

3. Turn on your Bluetooth headset or speaker and make sure it enter the pairing mode ( Note: Pls turn off your phone's Bluetooth function first )

4. Press the pairing key for about 3 seconds, the light flashes quickly, and it will automatically search nearby bluetooth receiver to pair

5. Wait a minute after the completion of the pairing, play the music or video on computer. Sound will be transmitted to your Bluetooth headset or speakers ( if the pairing is unsuccessful, you can try it again )



Specifications:

Bluetooth Version:V4.0

Range:10M

Input:3.5mm audio port

Powered By USB port



Package List:

1 x Bluetooth transmitter

1 x USB Cable

1 x 3.5mm Male to RCA Male Cable

1 x 3.5mm Audio Cable

• BLUETOOTH TRANSMITTER - Connect to audio output devices such as TV, iPod, CD player, PC, MP3/MP4, and transmit audio to your Bluetooth stereo, headphones and speakers.(Before you purchase, please check whether your TV has a 3.5MM headphone output or RCA audio port, if not, it is not suitable for your TV )
• TV TRANSMITTER - Connect the Bluetooth transmitter to your TV with 3.5mm audio jack or RCA and transmit the sound to the Bluetooth headset, just enjoy the shows at late night (For aptx low delay, please note the bluetooth headphone also need support this function)
• NO BUILT-IN BATTERY BUT FOREVER POWER: This bluetooth transmitter requires USB power, use your TV's USB port and it powers up automatically when you turn on TV. Or use any phone charger, PC USB or other 5V USB outlet. Never worry about charging
• DUAL LINK - Simultaneously stream audio to 1 and 2 headphones while watching TV, movies or gaming
• COMPUTER USB Audio Support: Ideal for PC use since it supports digital USB audio output. NO need any additional AUX cables

User questions & answers

Question:	Es compatible con alexa
Answer:	No sirve no se conecta con la TV solo con una PC o Lapto
Question:	will this pair Soundcore Q 20 head phones
Answer:	I don't know for sure, but I think it should, if the headphones are BT compatible. I use 3 different headphones with mine, and they all paired well. Hope this helps. Old Joe
Question:	So i can plug this into my tv and watch YouTube on my tv
Answer:	No, this is a bluetooth transmitter. To watch YouTube on your TV you need a Roku, an Amazon fire stick or a smart tv.
Question:	Why do i hear a buzzing sound in the beginning? it fades away where there is audio though. also is it okay to leave it on the whole time
Answer:	Mine doesn't have any buzzing, and yes, you can leave it in the USB port all the time. But if you want to remove it, probably any time you insert it again, you will have to pair it and select "Sound Settings" in Windows in order to change the "Output" so the OS send the sound to your Carpuride.

Product features

More Wire Connections

Compatible with most TVs with RCA/AUX audio output and even computer digital USB audio without the need for additional cables.

Important note - It does not support OPTICAL audio output like samsung samrt tv.

Mini Body, Big Heart

Transmitter is measured at 2.36 x 0.98 x 0.39 inch with the weight of 0.38 oz. It's only about the size of a narrow matchbox. Meanwhile, it features the most premium CSR8670 Bluetooth chipset, which makes it a very handy device for those who want to get away from wires. You will be amazed at what this little device can accomplish if you could give it a try!

High Quality Accessories

Package List:

1 x Bluetooth transmitter

1 x USB Cable

1 x 3.5mm Male to RCA Male Cable

1 x 3.5mm Audio Cable

1 x User Manual

• 【ENTER WIRELESS AGE w/ minimal COST】Upgrade non-smart/non-Bluetooth TV to pair headphones for enhancing your hearing or get an undisturbed personal space.Connected TV to Bluetooth Home Stereo, no need to replace your old TV, our Bluetooth audio transmitter for TV-RANGER help you upgrade the old one and CUT OFF the budget for a new.
• 【MINDLESS OPERATION】No need to be a tech junkie，Simply press the power button to start, and the Bluetooth adapter will automatically connect.Compatible with 99% of TVs, headphones or speakers on the market,supports Optical/ AUX / RCA Audio output.
• 【SHARE TV,DOUBLE HAPPINESS】Press 2 Bluetooth buttons to connect 2 headphones or speakers at the same time, sharing TV with family/friend/lover with this TV Bluetooth audio transmitter.You are NO LONGER AN ISLAND at this moment.
• 【LONGER RANGE,NO DELAY】 Dual antenna design amplifies the TV signal so you can hear the TV from anywhere in the house.Atpx technology eliminates the lip-sync delay..**Please ensure your headphone or speaker also with Atpx Low Latency technology.
• 【WE ARE NOT CHEAP】Life will eventually reward wise consumers who have a higher pursuit of quality life. Reasonable prices include quality assurance of products and services. We 1Mii technical engineers use the best materials and ergonomic design to make your use simple. We 1Mii after-sales team will accompany you to solve any problems during use. Choosing 1Mii, choosing an efficient and quality lifestyle.

Product features

Long Range, Strong Connection

Class 1 Bluetooth chip plus unique dual antennas, 1Mii long range Bluetooth extender with proven range up to 197ft(60m) LINE OF SIGHT IN OPEN AIR and up to 50-70ft (20-30m) indoors without interference.

Tips: Operation range can be affected by physical obstructions (walls, metal barriers, etc.), wireless interference (Wi-Fi router, Wireless TV adapter etc.) .

No Lip-sync Delay

AptX Low Latency technology of 1Mii long range Bluetooth transmitter eliminate Bluetooth audio delay, so you can watch TV / Movie / Video / Gaming in perfect synchronization.

Tips: It's better to pair with headphones also featuring aptX low latency for best results, this technology can eliminate the lag.

Flexible Audio Connections

1Mii B06TX long range Bluetooth transmitter Supports digital OPTICAL / COAXIAL / AUX 3.5mm/ RCA audio output standards making it compatible with 99% of the TVs, Receivers, Projectors on the market.

Tips: OPTICAL, AUX 3.5mm, RCA audio cables are comes in the box.

Make sure do not plug aux 3.5mm audio cable to the coxial jacks of the TV and B06TX.

Volume Controls

1Mii B06TX features Volume Control + / - ，specifically designed while wearing airpods or other earphones without volume control function.

Notice: Volume + / - doesn't work if your device does not support Audio / Video Remote Control Profile

Dual Link Control individually

1Mii B06TX Bluetooth transmitter with 2 Bluetooth buttons, lead you to pair with two Bluetooth speakers or Bluetooth headphones one by one easily.

Share Show simultaneously

Connect 2 headphones or speakers at the same time, sharing TV with family/friend/lover with this TV Bluetooth audio transmitter. You are NO LONGER AN ISLAND at this moment.

Plug

Connect 1Mii long range Bluetooth transmitter to a power source with 5V power cable, Plug the Bluetooth adapter with 3.5mm AUX,RCA or OPT cable to your TVs, Projectors, Receivers or other devices with audio output.

Tips：Take a power adapter to supply power if you get the ground loop noise.

The power adapter comes in the box.

Pair

Press the Bluetooth button of 1Mii Bluetooth adapter to pair with your Bluetooth headphones or speakers one by one, this Bluetooth audio adapter already in pairing mode for the first use once power on.

Notice: 1Mii B06TX is not a Bluetooth receiver, does NOT support being paired with any phone, tablet.

TV Settings

Make sure to set audio format to PCM or Stereo When connect a TV with Optical or Coaxial output. Dolby / DTS is not supported. Or, you may get no sound.

• Low Delay:low latency for high-fidelity stereo sound, content transmission without delays in transmitter mode. A low latency Bluetooth receiver is required
• Multifunction:The portable adapter that can be used as a transmitter or receiver at the same time,and with hands-free function
• Bluetooth is everywhere: In transmitter mode, convert a TV, PC, CD player, iPod, MP3 / MP4 other than Bluetooth into a Bluetooth transmitter. Receiver mode: ideal for sound systems transmitting music at home or in the vehicle
• Portable:The compact bluetooth adapter is small, lightweight and easy to carry
• Enjoy the Silence: Benefit from bluetooth audio when exercising, watching Late night TV shows, or simply when you want to keep the entertainment for yourself only

User questions & answers

Question:	When i use this with wireless headphones to listen to tv can my wife still hear the tv speakers too
Answer:	This is the wonder of theZIIDOO Bluetooth 5.0 Transmitter and Receiver. You can enjoy the wonderful TV program quietly without disturbing your wife and children.
Question:	How to connect with out 3.5 mm port of TV
Answer:	If your TV has a 3.5MM interface, you can directly insert the connection. If your TV does not have a 3.5MM interface, you may need to convert the cable.
Question:	Just received it, I plugged it in to my older sony bravia after pairing to my bluetooth hearing device but nothing. Is there something am doing wrong
Answer:	Hello, please follow the steps below first: How To Use: Receiver Mode 1.Use the micro USB cable to charge before use; 2.Connect the BT6 to your audio device using the AUX cable; 3.Change the switch button to position RX; 4.Turn on the device(Long press in the multifunction button) then the blue light will flash quickl y,indicating that is ready for pairing; 5.Find ZIIDOO BT6 in the bluetooth search of your phone and chose to pair. Transmitter Mode 1.Use the micro USB cable to charge before use; 2.Connect the BT6 to your TV/ Computer using the AUX cable; 3.Change the switch button to position TX; 4.Turn on the device(Long press in the multifunction button) then the blue light will flash quickl y,indicating that is ready for pairing; 5.Turn on the device you want to connect and the BT6 will automatically connect.When the connection is successful the bluetooth indicator will illuminate blue. If you still cannot connect, please tell us in time, we can refund you or replace it with a new one, thank you.
Question:	Can you use it when it’s charging
Answer:	There's a microphone inside the transmitter. That's what caused a lot of noise... Remove it. I don't understand the function of that microphone there... Sounds suspicious to me.

Product features

One click control

Easily switch between transmitter (TX) and receiver (RX) modes.

The music starts a new day

Unlock the full potential of your devices with ZIIDOO Bluetooth 5.0 transmitter, adopting aptX Low Latency technology to deliver high-fidelity stereo sound with no delay. Confidently & seamlessly stream music from your phone/tablet to wired headphone/speaker.

Bluetooth 5.0

Ensure a more stable connection with other devices, a stronger signal transmission.

Enjoy convenient life

With theZIIDOO Bluetooth transmitter, you can relax on the couch and watch TV with headphones without disturbing the lover in the room

ZIIDOO Bluetooth 5.0 Transmitter and Receiver-Extensive use cases

What happens if I want to listen to a TV, computer, laptop or MP3 player through a Bluetooth headset without disturbing others, but do not have Bluetooth capabilities? What happens if I want to pair my smartphone with a home speaker to stream audio and create a sound system, but the speaker doesn't have Bluetooth? Our ZIIDOO Bluetooth adapter helps you solve this problem.

Fast response

ZIIDOO Bluetooth 5.0 transmitter and receiver

Unleash the full potential of your device with theZIIDOO Bluetooth 5.0 transmitter. Stream music easily and smoothly from your phone / tablet to wired headphones / speakers.

Product description

✅This extremely portable and lightweight mini wireless bluetooth adapter is a wireless audio solution ideal for a wide range of situations and uses. Our BT-01 Bluetooth adapter is only 44mm (1.73 ”) in diameter and weighs only 18g, but has powerful wireless audio streaming capabilities.



✅INSTRUCTIONS

🔵Receiver mode(RX): Blue light, upgrade from non-Bluetooth devices to Bluetooth devices. The non-Bluetooth device connects to the Bluetooth adapter via an audio cable (the non-Bluetooth headset connects directly), then the adapter is connected via a Bluetooth tablet or cellphone, the final transformation has been successful.

🔴Transmitter mode(TX): Red light, connect the audio cable to the output connector of a non-Bluetooth device, then connect the Bluetooth adapter to the Bluetooth device so that the Bluetooth device can hear music. Wirelessly stream audio from a Bluetooth-enabled TV, home stereo, or CD player to headphones or Bluetooth speakers.



✅SPECIFICATIONS

Bluetooth: 5.0

Bluetooth pairing name: BT-01

Operation Range: Up to 20m (without any blocking objects)

Charging Time: 2 hours

Continuous Use Time: 10 hours (Receiver Mode) / 8 hours (Transmitter Mode)

Dimensions: 44 × 44 × 12mm

Weight: 18g



✅PACKAGE CONTENT

1x Bluetooth 5.0 Audio Transmitter/Receiver Adapter

1x Micro USB Power Cable

1x RCA Cable

1x 3.5mm Aux Cable

1x Multilingual Manual



✅REMARKS

☛If the battery is weak, the connection will be broken.

☛If a connection has failed or can not be connected for a long time, Please turn off and pair again.*Note: Please operate according to the manual, thank you for your support!!!

• 🎶【5.0 Bluetooth Adapter】The Bluetooth transmitter receiver USES 5.0 technology to provide more stable, faster transmission, lower power consumption, while demonstrating exceptional audio performance. With audio adapter bluetooth 5.0, data transmission rate is twice the bluetooth 4.2, and can keep for up to 20 meters long distance connection (disabled).
• 🎶【bluetooth transmitters and receivers】Launcher support shuangliu model of receiver (RX) and the transmitter (TX), for your cable equipment to add a wireless connection and wireless transmission of music. Receiver mode (RX mode, the blue light) : from the bluetooth phone and computer to stereo, speakers or headphones wireless audio. Emitter model (TX mode, the red light) : the audio from the bluetooth TV, home stereo or CD player wireless transmission to the bluetooth headset (not applicable).
• 🎶【using the attached wide compatibility】3.5 mm and 3.5 mm to 2 rca cable, the receiver transmitter adapter can be widely used in your computer (does not apply to Linux systems), laptop computers, home stereo system, headphones, smart phones, Mp3 players, CD players, etc.*Note: Please operate according to the manual, thank you for your support!
• 🎶【HD bluetooth receiver HD Acoustics】By adopting the technology of 5.0 low latency, eliminates the bluetooth audio delay, provides excellent audio quality, and have powerful wireless audio stream. The transmitters and receivers in the backpack or laptop bag, carry easily.
• 🎶【2020 New Version】The Bluetooth adapter is a major upgrade over the previous version, featuring greater compatibility, faster transmission speed, and better sound quality. It can be used continuously for more than 10 hours. We also provide friendly customer service 24 hours a day if you have any question, please feel free to contact us, we will help you to solve the problem.

User questions & answers

Question:	I want to use this to play an old stereo through bluetooth speakers. Does it plug into the headphone jack or aux (red/white)? 6.5 cm adapter needed
Answer:	You can use either with that stereo.
Question:	Can you use 3.5 and rca output simultaneously to a stereo syslem and a powered sub at the same time
Answer:	no. there's only audio left and right NO signal for Subwoofer.
Question:	Wired earpods
Answer:	You should be able to pair the unit with your phone in RX mode and plug your headphones into the unit to listen. Is that what you're asking?
Question:	I hooked to TV w red/white cables and paired to earbuds - issue is sound delay - can this delay be fixed
Answer:	I have the same issue, was told that there is often a setting on the tv to change the delay but there isn't one on my tv

• Bluetooth Adapter with Visual LED Display Screen: Clear visible LED screen allows you to see when device is in pairing mode, when it’s connected and what type of modes is in use. Independent buttons for handling 2 device connections allows for easy and intuitive control. On board volume adjust function can be used for many devices which do not have their own volume controls.
• Bluetooth Receiver for Car/Headphones: Simply connect it with your wired headphones, speaker or car stereo via 3.5mm cable, and pair it with Bluetooth-enabled audio sources such as your smartphone, tablet to enjoy pure Hi-Fi music wirelessly. Works with device which have USB port and 3.5mm port.
• Bluetooth Transmitter for TV/PC: It can help transmitting stereo audio wirelessly from your non-Bluetooth audio sources such as TV, iPod, MP3/MP4, PC, eBook reader to your Bluetooth-enabled headphones, speaker or receiver.Benefit from bluetooth audio when exercising, watching Late night TV shows, or simply when you want to keep the entertainment for yourself only.
• Easy to use and carry, Plug & Play: Bluetooth transmitter and receiver without installing any external driver.When used as a transmitter, please adjust your Bluetooth headset or speaker to adjust the volume, when used as a receiver, hold long press UP button or Down button to volume control.
• Extensive compatibility: The receiver transmitter can be directly used for PC, etc. via USB. Using the included 3.5mm cable, this receiver transmitter adapter can be widely used in TV, car stereo, home stereo, headphones, etc. (requires USB plugged in power to power the device)

User questions & answers

Question:	Is this as simple as it seems? just plug in to my non bluetooth tv and listen through my bluetooth earbuds
Answer:	Yes they do. I use my Bose q35 with it and it connects smoothly and the sound is good.
Question:	Is it always ready to receive a device
Answer:	This device is for audio only. But if you wanted to send audio from your laptop to your TV and your TV is Bluetooth capable, then yes.
Question:	is this a2dp compatible my speakers require it. will it work
Answer:	Probably so. This unit comes with RCA connectors to adapt to non-USB products.
Question:	Is usb plug for power only? is sound connected to trans/rec by the 3.5mm cable
Answer:	These are not high power devices - check the user manual (on mfgr web site. What kind of speakers do you have? If speakers are unpowered 8 ohm and just run from your amp, then no. If they are powered and can either have optical input or 3.5mm audio input, then probably will work.

Product description

Connect to TV via digital optical Audio out



1. Find the digital optical Audio out jack on your TV.



2. Connect the transmitter tt-ba09 to your TV via the digital optical Audio out jack using the digital optical cable.



3. Pair the transmitter tt-ba09 with your Bluetooth headphones/speakers. Connect to TV via aux/ RCA audio out once the transmitter is connected to Bluetooth stereos, the blue LED indicator will remain on. If there’s no sound coming out from your stereos, please kindly have a check see if you have plugged the unit into the audio output jack on your TV.



Pair with two Bluetooth headphones/speakers simultaneously



1. Turn on your speaker/headphones and the transmitter, place them into pairing mode (tap the power button twice to set the transmitter into pairing mode, LED flashes Blue and red). Making sure they pair with each other successfully.



2. Turn off the Bluetooth of the speaker/headphones and turn on speaker/headphones B. Then tap the power button twice of the transmitter to pair and connect to your speaker/headphones B. Also make sure they pair with each other successfully.



3. Turn on the Bluetooth of speaker/headphones a. In approximately 30 seconds, it will automatically connect in. And now the audio will be transmitted to both speakers/headphones.



Note



1. If the transmitter could not pair with the headphones/speakers successfully, please kindly reset both the transmitter and the headphones/speaker.



2. The transmitter is supported to Low Latency codec, Low Latency supported headphones/speakers are also required for the audio to be encoded via this codec.



What is in the box



1 x TaoTronics Bluetooth 5.0 2-in-1 adapter (Model: TT-BA09)



1 x 3ft digital optical slink cable/ 50cm audio cable



1 x 3.5mm 1. 64ft/ 50cm audio cable



1 x 3.5mm female to 2 RCA male Cable



1 x USB charging Cable 1 x user guide

• Transmitter + receiver: One portable adapter to use as either transmitter or receiver, powered by the latest Bluetooth 5.0, can pair with two headphones/speakers at once.
• Optical + 3.5mm: You get maximum flexibility with support for both 3.5mm (aux and RCA) and optical (to slink) digital, both input and output are supported.
• Low delay: Low Latency technology eliminate Bluetooth audio delay, so you can watch TV/movie/video and listen to high-clarity sound in perfect synchronization. NOTE: Low Latency only supports TX mode and works when receiver also supports this codec.
• Constant streaming and automatic re-pairing: Internal battery provides up to 15 hours of using, support charging and streaming at the same time, and automatically re-pairs with existing paired devices.
• Cable-free roaming: Keep your old stereo or wired headphones alive with new Bluetooth wireless connection, pair with smart phone or tablet from up to 30 feet away, and enjoy great music cable-free.

User questions & answers

Question:	My tv & speakers both doesnt have bluetooth.so i need to get 2 of these,one connected tv as transmitter and other connected to speakers as receiver
Answer:	There is a loud buzzing when trying to use during charging. This is from electrical interference from the plug. It could be possible to resolve this with a ground loop isolator but I haven't tried this myself. Those run $10-15 so could try it. It lasts a couple sessions of music listening for me and then I charge overnight.
Question:	Can it just be plugged in to the wall so that it's always charged/charging and won't need to be re-paired each time, or will that damage the battery
Answer:	No
Question:	can this device pass through optical signal..? It has a in and out port...? I just connected it in pass thru mode - no signal on the optical out
Answer:	Very compact 1.75- 2 inc by 2.25 -3 inc
Question:	Does the apx low latency support dual mode on these
Answer:	There is no rechargable battery.

Product features

Accurate Sound

Low-latency significantly reduce Bluetooth delay and allows synchronized audio and video for gaming and TV.

Stay On

Connect the adapter to a charger and leave it on. It will automatically resume connection with Bluetooth devices. (Transmitter Mode Only).

Bluetooth 5.0

Powered by the latest Bluetooth 5.0, and backwards compatible with Bluetooth v4.2, v4.1, v4.0, v3.0, and v2.1.

Product description

Upgraded Optronics Portable Bluetooth Transmitter Want to enjoy wireless audio reproduction but your TV PC iPod or older non-Bluetooth audio devices won’t support it? Simply add it!



The Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack.



NOTE：

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar, keyboard, electronic drums etc.)



What is In the Box

1 x Optronics Wireless Bluetooth Transmitter

1 x USB Charging Cable

1 x 3 5mm Female to 2 RCA Male Cable

1 x User Guide

• Low Latency Bluetooth Transmitter Add Bluetooth functionality to non-Bluetooth Audio Sources such as TVs PCs iPods MP3 players Allows you to stream audio to Bluetooth headphones/speakers wirelessly
• Fast setup for immediate usage intuitive installation enables your Audio devices to communicate with your Bluetooth headphones and speakers sound bar or echo up to 33ft/10m
• Immersive entertainment without disturbing others benefit from Bluetooth Audio when exercising watching Late night TV shows or simply when you want to keep the entertainment for yourself only
• Broad Compatibility Impeccable Sound Quality Relies on A2DP Bluetooth profiles for a smooth operation and perfectly synced high-fidelity audio reproduction
• Small size with great battery life Compact yet durable wireless transmitter provides up to 8 hours of continuous audio playback or 140 hours on standby
• Included components: Quick Start Guide

User questions & answers

Question:	does this transmitter have to be plugged into a power source or is it portable, can it be used while jogging
Answer:	The transmitter is USB chargeable. The unit has limited range. I have mine plugged into a TV, and it transmits to a portable Sound Bar located in the house, or very close to the house.
Question:	can i connect the 305 mm plug into a sony mini disc player and then connect to my cars bluetooth
Answer:	I don't know where you got the 305 mm dimension from, but the transmitter's connector should fit the disc player's headphone jack. Your car's Bluetooth should be able to pair with the transmitter. You'll need to think about charging or powering the transmitter. You can use a 12V/5V car charger continuously to eliminate the hassle and interruption of re-charging. I don't know how the mini disc player is powered, but if it uses a car charger and you only have one accessory outlet available, I think you can find a splitter for this purpose.
Question:	What the heck is a mfb? is it the bluetooth headphones
Answer:	Make sure it is compatible with your headphones.
Question:	How much of a difference in terms of longevity does it make to charge it through the TV versus an outlet while in use
Answer:	It didn’t work in our car stereo so I sent it back

• Visual screen: unique screen design, ZIIDOO Bluetooth transmitter can freely choose the Bluetooth headset or speaker to connect
• Transmitter Receiver 2-In-1:Universal Bluetooth audio adapter makes your TVs and other devices Bluetooth enabled to stream audio to your Bluetooth headphones, or makes your home stereo Bluetooth enabled to receive the wireless music streaming from your phone and tablet. Works with device which have USB port and 3.5mm port(Notes: 1. only for audio, not for ps4,mouse, keyboards or game controllers,printer, projector. 2.Only suitable for audio transmission, does not support the microphone call func
• Easy to use and carry, Plug & Play: Bluetooth transmitter and receiver without installing any external driver.When used as a transmitter, please adjust your Bluetooth headset or speaker to adjust the volume, when used as a receiver, hold long press UP button or Down button to volume control(When using for a TV, please use a 3.5mm audio cable to connect to the TV’s audio output port, and use the USB port to charge the device)
• Application:You can enjoy TV/PC show with your Bluetooth headphones avoid disturbing others and have a quiet and wonderful night
• Extensive compatibility: The receiver transmitter can be directly used for PC, etc. via USB. Using the included 3.5mm cable, this receiver transmitter adapter can be widely used in TV, car stereo, home stereo, headphones, etc. (requires USB plugged in power to power the device)

User questions & answers

Question:	Will this work on a harley Davidson
Answer:	yes, it does work with Galaxy Note 10
Question:	Can it pair two Bluetooth headphones while connected to a tv
Answer:	this will work with a PC laptop, an ipad, or an iphone or any Android device really well.
Question:	Will this device pair with Sonos Move using Bluetooth
Answer:	yes, it has volume control.
Question:	will this connect to airpods. Mine goes into search mode and will not connect. Is thier an app. that needs to be downloaded
Answer:	To be honest, we don't confirm if it could work with Android Mini, because we never test it with Android Mini. We will ask our person to make a test after holiday! Thanks Melanie Mitchell!

Product features

ZIIDOO LCD 2-in-1 Bluetooth Adapter

• Visual screen: unique screen design, ZIIDOO Bluetooth transmitter can freely choose the Bluetooth headset or speaker to connect
• Transmitter Receiver 2-In-1:Universal Bluetooth audio adapter makes your TVs and other devices Bluetooth enabled to stream audio to your Bluetooth headphones, or makes your home stereo Bluetooth enabled to receive the wireless music streaming from your phone and tablet. Works with device which have USB port and 3.5mm port
• Easy to use and carry, Plug & Play: Bluetooth transmitter and receiver without installing any external driver
• Application:You can enjoy TV/PC show with your Bluetooth headphones avoid disturbing others and have a quiet and wonderful night
• Extensive compatibility: The receiver transmitter can be directly used for PC, etc. via USB. Using the included 3.5mm cable, this receiver transmitter adapter can be widely used in TV, car stereo, home stereo, headphones, etc. (requires USB plugged in power to power the device)

Transmitter Receiver 2-In-1

Transmitter Receiver 2-In-1:Universal Bluetooth audio adapter makes your TVs and other devices

Bluetooth enabled to stream audio to your Bluetooth headphones, or makes your home stereo

Bluetooth enabled to receive the wireless music streaming from your phone and tablet.

Via USB, you can use ZIIDOO Bluetooth transmitter directly on PC;

When you need to use on TV (ZIIDOO Bluetooth adapter as transmitter), headphones, car stereo, home stereo (ZIIDOO Bluetooth adapter as receiver), please use the included 3.5mm cable, requires USB plugged in power to power the device

Long distance transmission

10 meters barrier-free transmission

Music on the go

BlueTooth 5.0

BlueTooth 5.0 chip faster and more

stable

Lightweight and easy to carry

Compact and lightweigh，the convenierce of Bluetooth at any time

Drive-free wired and wireless Switch in one second

Plug and play，Bluetooth fast matching connection more convenient to use

Product description

TX mode:

In the TX mode, the Bluetooth transmitter can be used to stream audio from non-Bluetooth audio sources such as non-Bluetooth TVs or CD players to Bluetooth headphones/speakers. This transmitter is supported to RCA connectors and AUX connectors, therefore, please kindly have a check see whether your audio sources have one of these kinds of jacks. Please note that the adapter should be plugged into the “L&R AUDIO OUT” jack or the “AUX OUT” jack on the audio source but not the “Component IN” jack. 



RX mode:

In the RX mode, the Bluetooth adapter could be used as a Bluetooth receiver to non-Bluetooth stereos such as wired headsets or wired speakers. Pair the Bluetooth receiver with your cell phone and plug your headsets into the jack on this unit, then you will be able to hear the music from your phone. 



NOTE： 

If the TV does not have the “AUX OUT” jack or the “L&R AUDIO OUT” jack, a headphone jack should also work.

If the TV only have a “DIGITAL AUDIO OUTPUT (OPTICAL)” jack, a convertor is needed or you could choose another model of TaoTronics Bluetooth Transmitters, TT-BA09, which is supported to both aux audio output and optical audio output.

Not recommend for streaming live music (while playing guitar keyboard electronic drums etc ).



What’s in the box

1 x TaoTronics Bluetooth 5.0 2-in-1 adapter (Model TT-BA08) 

1 x 3.5mm audio cable 

1 x 3.5mm female to 2 RCA male cable 

1 x USB Charging cable 

1 x User guide

• Bluetooth transmitter and receiver: Transmitter function transforms 3.5mm audio-out media devices into a Bluetooth device capable of streaming Bluetooth audio; Receiver lets non-Bluetooth devices like car or home Stereos receive high quality audio.
• Instant sound: Enjoy a latency lower than 95% of other devices with Low Latency technology; end-to-end lag time is now 40 milliseconds so high-definition video is transmitted without problems in Transmitter mode.
• A 2 for 1 connection: Two Bluetooth headphones or speakers can pair at once so children can watch in silence and give parents a needed break. NOTE: Low Latency does not support dual pair mode.
• Full control: During receiver mode you have full control of the music including play/pausing track selection and volume control with buttons on the adapter controls. The adapter can connect to traditional device like wired headphones or speakers so they can receive Bluetooth music direct from phones and tablets. NOTE: Only RX mode allows for audio control with the volume +/- button.
• Always ready: With 20 hours of continuous audio, battery protection, charging during operation and pairing memory functionality you're always ready for fun.
• NOTE: In TX mode the unit should be plugged into the “L and R Audio out” jack or “aux out” jack or the headphone jack on the audio source device.

Product features

Easy To Set Up

Simply connect the transmitter to the audio output port of your TV, iPod, or other device via the 3.5mm audio cable or the RCA cable to receive sound.

Work While Charging

You’ll never need to turn off the adapter as you can use it while charging. Even better is that it will automatically re-pair every time you use it.

More Battery Life For More Fun

An extra-long battery life of 20 hours means you can enjoy music for almost the entire day before the next recharge.

No More Wires With Bluetooth

You can say goodbye to tangled wires with the Bluetooth 5.0 standard that gives a stable and reliable streaming connection.

• ♥【2-IN-1 Transmitter & Receiver Mode】With Upgrade Bluetooth 5.0 technology, transmits data twice as fast as Bluetooth 4.2, more stable connection NEVER cutting in and out.◆In TX mode connect Bluetooth transmitter to Audio output devices, make your TV, computer, iPod stream audio to your Bluetooth speaker, Headphones ◆In RX mode stream audio from your phone to non-Bluetooth device(home stereo system, speakers). Make your old-fashioned home stereo become a smart speaker in seconds.
• ♥【Pair One with Two + NO LIP-SYNC DELAY】Can connect 2 Bluetooth headsets / speakers simultaneously to your TV in transmitter mode, or pair 2 devices to your home stereo system to stream music in receiver mode at the same time. Automatically connect to your previously paired devices at power-up. Supports HD low latency to virtually eliminate bluetooth audio lag. Note: ①In Low Latency mode, Bluetooth headphones / speakers are also required Low Latency.
• ♥【Built-in Microphone】Built-in microphone, this is a special point different from the other adapters on the market, you can enjoy hands-free calling,pick up or hang up a phone call by click the play/pause button,easily switch between music and call mode. The wireless distance is up to 20 meters (no obstacles).
• ♥【LED Indicator Status & 24H Long Battery Life】 The indicator light design allows you to clearly identify the contents and connections way, make it easier for you to use. With built-in 600mAh battery, it can provide up to 24 hours working time after about 2.5 hours charging.
• ♥【Easy to use】What you get:1 x ELEGIANT BTI-066 Bluetooth adapter,1 x Micro USB Charging Cable,1 x 3.5mm Audio Cable,1 x 3.5mm Jack to 2 RCA Plug Cables,1 x Digital Optical Toslink Audio Cable,1 x User Manual, compatible with 99% of the TVs, car stereo and other devices.

Product features

Transmitter Mode

1. Transmitter Mode

In TX transmitter mode, the Bluetooth Adapter can be plugged into the audio output jack on TVs, PC, computers, iPods, AV receiver and other non-Bluetooth audio sources, and paired to Bluetooth headphones / speakers,e.g. Bose, Beats, Sony, Plantronics, Apple AirPods headphones.

2. Receiver Mode

In RX Bluetooth receiver mode, the Bluetooth Adapter can be paired to cellphones, iPads, or other Bluetooth audio sources, and plugged into wired speakers headphones to stream audio from cellphones to the wired stereos.

Receiver Mode

Specification:

Bluetooth Version: Bluetooth 5.0

CODEC (RX): HD, LL, SBC, AAC

CODES (TX): HD, LL, SBC

Bluetooth range: 20M

Working time: 24 hours

Charging time: 2.5 hours

Batteries: 600mAh

Delivery content:

1 x ELEGIANT BTI-066 Bluetooth adapter

1 x Micro USB charging cable

1 x 3.5mm audio cable

1 x 3.5mm jack to 2 RCA plug cables

1 x Digital Optical Toslink Audio Cable

1 x user manual

1. Enter "Sound Settings"

2. Select "Expert Settings"

3. Set "Digital Output Audio Format" to "PCM"

Built-in Microphone

Our wireless audio adapter has built-in microphone, this is a special point different from the other adapters on the market. With built-in microphone, you can enjoy hands-free calling, pick up or hang up a phone call by click the play/pause button, easily switch between music and call mode.

Smart LED Light

Indicator light design allows you to be more clear about the product connection content and way, which is more convenient for you to adjust when using. Multiple modes are available for you to choose, making it easier to use.

Up to 24-hours Playing Time

With built-in 600mAh battery, this adapter can provide up to 24 hours playing time, and take about 2.5 hours for full charging.

More Audio Connection Option

ELEGIANT Bluetooth adapters equipped with the digital optical and AUX interface, Optical Fibres TOSLINK, 3.5mm AUX and RCA audio cable, provide you more options.