14 best the raspberry pi

• Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE)
• 2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG
• Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover
• 40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter
• All Parts Covered Under the Vilros 1 Year Warranty

User questions & answers

Question:	Where does the heat sink go? Is it just stuck to the top of the processor or does it go somewhere else on the board
Answer:	Python is included in the Raspian operating system along with the Thonny IDE that you'll use as your workspace to do your coding. The SD micro card you'll use to plug into the pi will have all that stuff on it and will set everything up for you the first time you boot it up. Watch those UTube videos and tutorials, they're priceless!
Question:	What game systems can this emulate smoothly
Answer:	No.
Question:	Is there a light that lights up when it gets power
Answer:	No case is included but yes you will need to pop it in a case or just put it on a non-conductive surface. The computer itself is complete other than the SDcard which will need have an image on it and put into the slot.
Question:	What is the minimum and maximum SD card this little guy can take
Answer:	I don't know the answer to the question you're asking but I want to expand on what you're asking. The original revision of the board has issues on the USB-C port had issues not working with LOTS of chargers as it was out of spec and caused thing's to be be identified as an audio device.

Product description

IMPORTANT NOTE: If you see a rainbow splash screen with a lightning bolt symbol, this indicates you are NOT using B+ compatible software. NOOBS 2.7.0 or later is required for operation of the B+.



An exclusive kit from CanaKit that includes the fastest model of the Raspberry Pi family - the Raspberry Pi 3 Model B+ (B Plus)!



The Raspberry Pi 3 Model B+ is the latest production Raspberry Pi 3 featuring a 64-bit quad core processor running at 1.4 Ghz. It incorporates built-in WiFi and Bluetooth connectivity with enhanced dual-band 2.4 GHz and 5 GHz WiFi, Bluetooth 4.2/BLE and faster Ethernet.



To take full advantage of the improved power management on the Raspberry Pi 3 B+ and provide even support for even more powerful devices on the USB ports, a 2.5A adapter is recommended.



The power supply included in this kit incorporates a noise filter to provide the highest stability and comes with a 5-foot cable. This power supply can power the Raspberry Pi 3 B+ and other USB accessories (such as most portable hard drives) without requiring an external powered USB hub.



The kit also includes a premium quality case specially designed for the Raspberry Pi 3 B+.



Kit Includes:

Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) 1 GB LPDDR2 SDRAM

CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 B+ (5-foot cable)

Set of 2 Aluminum Heat Sinks

Premium Clear Case

CanaKit Quick-Start Guide

• Includes Raspberry Pi 3 B+ (B plus) with 1.4 GHz 64-bit Quad-Core Processor and 1 GB RAM
• CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ (UL Listed)
• Dual band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Enhanced Ethernet Capability
• Premium Clear Case, Set of 2 Aluminum Heat Sinks
• CanaKit Quick-Start Guide

User questions & answers

Question:	Does the power cable have a switch
Answer:	Yes, this is one of the distinguishing features of this kit. It has a cable that connects between the power supply and the Pi. The on/off switch toggles and a small red LED lights to show that power is on.
Question:	Does the "premium clear case" for pi 3 model b+ in canakit "b07bc7bmhy" contain slots for the camera ribbon cable
Answer:	Yes, there are two rectangular holes, one for GPIO cable next to the connector on the pi and one smaller on the short side opposite to USB and Ethernet connection. I think it can be used for display or camera
Question:	Title says rpi 3b+ but description says that it's rpi 2 . which one is it
Answer:	I just got mine. It’s indeed 3B+. It’s revision is a020d3.
Question:	How is the heatsink applied
Answer:	Adhesive on the back of each heat sink. Apply one to each designated spot.

• Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, Set of Heat Sinks, Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

User questions & answers

Question:	What is noobs
Answer:	NOOBS stands for New Out Of the Box Softwear. It is a piece of softwear put together by the people who design and build the Debian (Named for Debbie and Ian, hence Debian) software which is designed Especially for the Raspberry Pi. You will find it is the best choice and fit for the Machine itself. With the Canakit you get EVERYTHING you need to get started. By following their excellent instructions, you will soon be up and running. I believe they have just about thought of everything. Correct power supply, Power on/off switch, adapter for both power and Mini HDMI connectors and a fan powered case. With the NOOBS on the Micro SD HD card you can choose the OS you prefer from about 5-6 choices. I recommend Raspbian Buster, and the Elec one that supplies the Kodi installation of the OS. The HD card you are supplied is big enough to hold both systems. That way, you can dual boot to either one and live like a king. Enjoy the Raspberry Pi 4 You have one of the best single board computers ever built. Should give you years of "building" or "Makers" fun.
Question:	How do you attach the heat sink? This is my 1st Pi
Answer:	The heat sinks aren’t officially a requirement but since they are in the kit it makes perfect sense to put the on especially if you plan to run your pi with passive cooling. Mine also came with the fan.
Question:	This kit does not include a fan, right
Answer:	A small fan is included, but it is not really required unless you are going to run the board hard with 24/7 computing projects. For distributed computing projects where the CPU is run at 100%, the fan will hold temps down by about 10 deg C with the heatsinks.
Question:	My son is asking for this and he is 11. Appropriate
Answer:	If your 11 year old protege is wise enough to ask for one of these, he deserves both this and a 7in touchscreen Raspberry Pi monitor to support his future endeavors. Brilliant kid- sending virtual kudos.

Product features

CanaKit Raspberry Pi 4 8GB Starter Kit

An exclusive Starter Kit from CanaKit that includes the 8GB RAM version of the latest generation model of the Raspberry Pi family: The Raspberry Pi 4 8GB and everything you need to get up and running within minutes in the exciting world of Raspberry Pi!

The Raspberry Pi 4 features a 64-bit quad core processor running @ 1.5 Ghz. The CanaKit Raspberry Pi 4 8GB Starter Kit includes a premium Raspberry Pi case as well as a Samsung 32 GB EVO+ Class 10 MicroSD pre-loaded with NOOBS. Just Plug & Play!

What's in the box?

• Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount
• CanaKit Low Noise Bearing System Fan
• Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)
• Set of Heat Sinks
• USB MicroSD Card Reader
• CanaKit Quick-Start Guide and CanaKit GPIO Reference Card

CanaKit Black Case

Premium quality ABS 3-piece plastic case specially designed for the Raspberry Pi 4 with GPIO access.

CanaKit Low Noise Fan

CanaKit Exclusive Low Noise Bearing System Fan

CanaKit PiSwitch

Convenient On/Off Power Switch with LED indicator for the Raspberry Pi.

Samsung 32 GB EVO+

High performance EVO+ Class 10 MicroSD card pre-loaded with NOOBS.

CanaKit 3.5A USB-C Power Supply

CanaKit 3.5A USB-C power supply (UL Listed) is specially designed and tested for the Raspberry Pi 4. This power supply incorporates a noise filter to provide the highest stability.

CanaKit Micro HDMI Cable

CanaKit Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

USB MicroSD Card Reader

Set of Heat Sinks

Product features

From the Preface

Launched in 2011, the Raspberry Pi has found a role both as a very low-cost Linux-based computer and as a platform for embedded computing. It has proven popular with educators and hobbyists alike.

As of this writing, more than 20 million Raspberry Pis have been sold. The Raspberry Pi 4 with an option of 4 GB of performance makes the Raspberry Pi more than powerful enough to use as a replacement for a desktop computer. The availability of open source software for internet browsing, email, office suites, and photo editing is set to make the Raspberry Pi even more popular.

Even the latest Raspberry Pi 4 still includes the general-purpose input/output (GPIO) pins that allow the hobbyist to add their own electronic contraptions to the Raspberry Pi.

This edition has been thoroughly updated to encompass the new models of Raspberry Pi, as well as the many changes and improvements to its Raspbian operating system. There are also new chapters on sound and home automation.

This book is designed so that you can read it linearly, as you would a regular book, or access recipes at random. You can search the table of contents or index for a specific recipe & jump directly to it. If the recipe requires you to know about other things, it will refer you to other recipes, rather like a cookbook might refer you to base sauces before showing you how to cook something fancier.

The world of Raspberry Pi moves quickly. With a large, active community, new interface boards and software libraries are being developed all the time. In addition to examples that use specific interface boards or software, the book also covers basic principles so that you can have a better understanding of how to use new technologies that come along as the Raspberry Pi ecosystem develops.

Product description

The Pico is a low cost, high performance microcontroller board built around the Raspberry Pi RP2040 chip. The Pico features flexible digital interfaces and can be easily programmed over USB using C/C++ or MicroPython, thanks to a comprehensive SDK with software examples and full documentation.



Raspberry Pi designed RP2040 chipset

Dual core ARM Cortex M0+ processor at up to 133MHz with variable core frequency

264kB SRAM & 2MB onboard flash memory

26 Multifunction GPIO pins (23x digital only, 3x ADC capable)

2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC and 16x controllable PWM channels

The Pico can be surface mounted as a module

Accurate clock and timer on chip

Temperature sensor

Accelerated floating point libraries

Micro USB port for power & data

3-pin ARM Serial Wire Debug (SWD) port

• The Pico is a low cost, high performance microcontroller board built around the Raspberry Pi RP2040 chip
• Dual core ARM Cortex M0+ processor at up to 133MHz with variable core frequency
• 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC and 16x controllable PWM channels

Product description

Processor: Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz.

Memory: 1GB LPDDR2 SDRAM.

Connectivity: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE;

Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps);4 × USB 2.0 ports.

Access: Extended 40-pin GPIO header.

Video & sound: 1 × full size HDMI；MIPI DSI display port；MIPI CSI camera port；4 pole stereo output and composite video port.

Multimedia: H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics.

SD card support: Micro SD format for loading operating system and data storage.

Input power: 5V/2.5A DC via micro USB connector；5V DC via GPIO header；Power over Ethernet (PoE)–enabled (requires separate PoE HAT).

Environment: Operating temperature, 0–50°C.

• 1.4GHz 64-bit quad-core processor, dual-band 2.4GHz and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT).
• Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports and Extended 40-pin GPIO header.
• 1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port.
• 1GB LPDDR2 SDRAM；Micro SD format for loading operating system and data storage. (Micro SD is Not included.)

User questions & answers

Question:	Does this have USB
Answer:	Yes, the Raspberry Pi 3 Model B+ has four (4) USB 2 ports. The complete port list follows: BCM43438 wireless LAN and Bluetooth Low Energy (BLE) on board One (1) 100 Base Ethernet Port (RJ45) One (1) 40-pin extended GPIO Four (4) USB 2 ports One (1) 4 Pole stereo output and composite video port One (1) Full size HDMI port One (1) CSI camera port for connecting a Raspberry Pi camera One (1) DSI display port for connecting a Raspberry Pi touchscreen display One (1) Micro SD port (Used to load the operating system and storing data)
Question:	What does it need to work, just a sd card and power cord
Answer:	Yes a 5v power
Question:	does it come with a micro as card,if so,how much space does it have
Answer:	It does not come with an SD card or any other accessories. Just the board in a anti-static bag and a small printed quick start guide.
Question:	Was this supposed to come in an anti static bag? i’m disturbed it was just in the box. haven’t tried it yet as i’m waiting for more parts
Answer:	I just got 3 of these and none of them had anti-static bags.

Product description

NOTE: The SanDisk 16 GB MicroSD card may appear as 1 GB when inserted into a PC as it is pre-partitioned. The remaining space can be expanded as desired.



This exclusive kit from CanaKit includes the ultra-small and ultra-slim Raspberry Pi Zero W (Wireless) and all essential accessories. The Raspberry Pi Zero W (Wireless) is the smallest form factor Raspberry Pi on the market and now incorporates WiFi and Bluetooth connectivity on board. It is 40% faster than the original Raspberry Pi but measures only 65mm long by 30mm wide and 5mm deep. The Raspberry Pi Zero W supports mini connectors to save on space and the 40 pin GPIO is unpopulated provding the flexibility to use only the connections your project requires.





Kit Includes

- Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth

- Official Raspberry Pi Zero Case - 3 Interchangeable Official Lids

- SanDisk 16 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS

- CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable)

- USB OTG Cable

- Mini HDMI Adapter

- Heat Sink

• Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth
• Official Raspberry Pi Zero Case with 3 Interchangeable Lids
• SanDisk 16 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS
• CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable)
• USB OTG Cable, Mini HDMI Adapter and Heat Sink

User questions & answers

Question:	This is everything to get me started correct? I don’t own pi device yet! Thanks
Answer:	Yes.
Question:	Does this 2.5a adapter have the power to power a pi zero and a (non-powered) usb hub with data usb drives? (vs a 1a adapter
Answer:	You don’t need to buy any other products will be able to use our suit, use the USB cable to connect Arduino board and computer and then can start using.
Question:	This or newer pi 4 for pihole? Or does newer hardware specs not matter for pihole use
Answer:	I M not really sure. I think you would need a few shields for that, but you can go on Arduino's website and search that in the project search bar.
Question:	Does the kit contain the 40mm raspberry pi zero / pi zero w compatible camera cable as show in the lower right corner
Answer:	We have a list of projects:Lesson1-LED blinkLesson2-LED trailing effectsLesson3-Traffic lightLesson4-Analog InputLesson5-ButtonLesson6-FadingLesson7-Responder experimentLesson8-Active buzzerLesson9-Passive buzzerLesson10-RGB LEDLesson11-Making SoundsLesson12-Analog temperatureLesson13-Tilt switchLesson14-Eight LEDs and a Shift RegisterLesson15-1 digit LED Segment DisplaysLesson16-4 digit LED Segment DisplaysLesson17-SweepLesson18-KnobLesson19-One step at a timeLesson20-Stepper Speed ControlLesson21-Ultrasonic rangingLesson22-Infrared remote control experimentLesson23-DHT11 ExperimentLesson24-LCD1602Lesson25-Temperature and humidity monitoring experimentLesson26-Water level monitoring experimentLesson27-Joystick test experiment

Product description

Raspberry Pi 4 Model B-8GB is the latest product in the popular Raspberry Pi range of computers.

It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption.



For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2. 4/5. 0 GHz wireless LAN, Bluetooth 5. 0, Gigabit Ethernet, USB 3. 0, and PoE capability (via a separate PoE HAT add-on).



The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market. Operating temperature: 0 – 50 degrees C ambient.

• 2. 4 GHz and 5. 0 GHz IEEE 802. 11B/g/n/ac Wireless LAN, Bluetooth 5. 0, double-true Gigabit Ethernet
• Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz---8GB LPDDR4-2400 SDRAM

User questions & answers

Question:	Does it come with the hdmi cables
Answer:	It's just the core. Needs all the accessories and sd card/USB drive

Product description

The Argon ONE M.2 Case ups the ante by providing two full-sized HDMI ports, Power Management Modes that allows for automatic booting, Built-in IR support with streamlined options for configuration and Integrated M.2 SATA SSD support through the USB 3 Ports of the Raspberry Pi 4. Argon ONE M.2 Case extended support for M.2 SATA SSDs allows you to maximize the true potential speeds of your Raspberry Pi 4. You will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD Card. Argon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive. It is compatible with any M.2 SATA SSD with B-Key and B+M Key.

• M.2 SATA SSD Compatibility | The SSD Case accepts any size of M.2 SATA SSD with B-Key or B+M Key
• UASP Supported for Raspberry Pi 4 | The Raspberry Pi 4 SSD Board is designed to maximize the high speed data transfers for Raspberry Pi 4
• Two Full-Sized HDMI | The Argon Case has been redesigned with two full-sized HDMI ports for better dual screen support, repositioning the ports in the back to maintain the sleek and moder design
• Power Management Modes | This Pi 4 Case offers 2 power management options with normal booting or automatic booting, and also offers IR support that works best with the Argon ONE Remote
• Efficient Cooling | The Argon ONE Raspberry Pi 4 case with fan cools your Argon ONE Software while the case acts as a heatsink connected to the CPU

User questions & answers

Question:	Does anyone know what voltage the fan is? Looking to replace the stock one when it arrives
Answer:	No need to replace the fan. Once you install the ArgonOne script to the PI you can set the percentage that the fan runs at three temps. Besides the fan is wisper quiet.
Question:	Are original msata cards supported
Answer:	mSATA SSD's are not compatible. Case only accepts any size of M.2 SATA SSD with Key-B or Key-B&M.
Question:	Amz listing for top package (of the 3) is confusing! is this the argon one m.2 and ssd base as one set? no pi, psu nor ssd included right
Answer:	3 Versions: 1- No M.2 is only moving position of micro HDMI(no conversion to HDMI) and Audio to same side as USB. Has opening for SD slot in correct position. Fan included. Ordered by me. Needed next version. 2- M.2 bottom part(no conversion to HDMI, no remote sensor) uses part already ordered above only adds M.2 with USB 3 connection with donggle provided. No access to the SD card slot I found out after I ordered so kinda regretted as boot is required with SD for most things so if you want to go to different Operating systems kinda an issue and I haven't changed to M.2 sata SSD card yet as still trying to play with operating systems. Want Windows but not a fully updatable version yet and arm 64 version available just recently but buggy. (M.2 sata SSD card 2280 separate has to be this type of SSD) I ordered SSD tried to use with Twister but not fully working yet as haven't switched to SSD storage yet. I had to make a hole for the SD card change out for booting different operating systems. For this reason should have bought the next version and HDMI conversion. 3-M.2 bundle (haven't ordered yet as my build has run me tight on money should have just bought this one to begin with just for the HDMI conversion) I had to buy micro SD conversion cords for previous version if bought this version wouldn't have had to. Still have to buy separate M.2 sata SSD card I bought one on sale which was a great price plus I had a first time order credit so really good deal. If only I bought this version. I am not sure if this version has slot for SD card as same bottom as the second version I believe comes with this version. I am guessing not. I would suggest if you order argon m.2 buy the whole bundle not separately. This version even if you have an SD card slot issue like me at least until I put everything to M.2 sata SSD card. Just some OS require booting through SD card I believe. Still new to Rasberry pi 4B 8GB wifi version as well as Linux. The command in Linux is included in your instruction manuals for fan but the fan wouldn't work through Windows the times I tried and command wouldn't work through command prompt so need to figure out as it got real hot with Windows the last try and slow too.
Question:	Does this support nvme cards like the samsung 970 evo m.2 nvme
Answer:	They used the m.2 sata III Card. Speed limitation is the usb 3. So sata is the right speed. Nvme is bottlenecked @ usb or its speed is useless and expensive by it self. Sata is plenty fast.

Product description

IMPORTANT NOTE: Raspberry Pi 4 8GB compatible operating system is required for operation (NOOBS 3.4 or later).





IMPORTANT NOTE: Micro HDMI cable required for operation.





An exclusive kit from CanaKit that includes the fastest model of the Raspberry Pi family - the Raspberry Pi 4!



The Raspberry Pi 4 offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation boards, while retaining backwards compatibility and similar power consumption. The Raspberry Pi 4 provides desktop performance comparable to entry-level x86 PC systems.



Due to the higher power requirements, the Raspberry Pi 4 requires a 3.0A USB-C power supply. The CanaKit USB-C power supply (UL Listed) that is included in this kit is specially designed and tested for the Raspberry Pi 4. This power supply incorporates a noise filter to provide the highest stability.



In addition to the CanaKit USB-C power supply, this kit includes a set of 3 Aluminum Heat Sinks to keep the Raspberry Pi 4 cool as well as the Cana Kit Quick Start Guide.





Kit Includes:



- Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU

- 8GB RAM

- CanaKit USB-C Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 4 (5-foot cable)

- CanaKit 3.5A USB-C PiSwitch (On/Off Power Switch)

- Set of 3 Aluminum Heat Sinks for the Raspberry Pi 4

• Includes Raspberry Pi 4 8GB Model B with 1.5GHz 64-bit quad-core CPU (8GB RAM)
• CanaKit 3.5A USB-C Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 4 (5-foot cable)
• CanaKit USB-C PiSwitch (On/Off Power Switch)
• Set of 3 Aluminum Heat Sinks for the Raspberry Pi 4

User questions & answers

Question:	Ok i’m totally new to all this tech stuff. i’m branching out learning something new. do i need to by python for coding or is it on here or at least ea
Answer:	Python is included in the Raspian operating system along with the Thonny IDE that you'll use as your workspace to do your coding. The SD micro card you'll use to plug into the pi will have all that stuff on it and will set everything up for you the first time you boot it up. Watch those UTube videos and tutorials, they're priceless!
Question:	Is an SD card included in this kit
Answer:	No.
Question:	Is the raspberry pi itself all prebuilt? Would i just need to pop it into the case
Answer:	No case is included but yes you will need to pop it in a case or just put it on a non-conductive surface. The computer itself is complete other than the SDcard which will need have an image on it and put into the slot.
Question:	Are the ones you are shipping now the revised version 1.2 boards with the fixed usb-c port
Answer:	I don't know the answer to the question you're asking but I want to expand on what you're asking. The original revision of the board has issues on the USB-C port had issues not working with LOTS of chargers as it was out of spec and caused thing's to be be identified as an audio device.

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjgTR



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

  ...

(Download tutorial for details)

  ...

Chapter 26 WebIOPi & IOT

 Project 26.1 Remote LED

Chapter 27 Solder Circuit Board

 Project 27.1 Solder a Buzzer

 Project 27.2 Solder a Flowing Water Light

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 18 Infrared Motion Sensor

 Project 18.1 Sense LED

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	are there any tutorials for how to connect everything?? Not looking for coding tutorials yet
Answer:	Dear customer, Thank you for your question. You can download tutorial first via link below: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master.zip If you have any concerns, please feel free to contact us via Freenove support email. Best Regards, Freenove Support Team
Question:	Issues with the i2c module:the instructions you give in the tutorial are outdated and not applicable to the rpi3 and python3 - any suggestions
Answer:	Dear customer, We have update our tutorial(i2c configure) and code(Python) for customers. Now all Python code can run on Python 2 and Python 3. Please download again. Thanks for your question. Kind Regards, Freenove
Question:	Does it work with raspberry pi
Answer:	Dear customer, Yes, we have tested all projects in our tutorial . This kit works well with Raspberry Pi 4. And if you have any concerns, we offer technical support. Sincerely, Freenove Support Team
Question:	Are three 74HC595's used in one project? I broke one since the pins were ripped by me pulling it out of the breadboard too hard
Answer:	Dear customer, Thank you for choosing Freenove. I am sorry for the inconvenience. No, there is no project using three this chips. There just is a project using two this chips. If you broke more chips, you can contact us at [email protected] We will send you a new one for free. So don't worry. Sincerely, Freenove Support Team

Product description

Unbelievably the super-small and super-affordable VERSION 1.3 WITH CAMERA ADAPTER! Raspberry Pi just got even smaller and even cheaper! Pi Zero is the heart of a Raspberry Pi on a tiny 65mm x 30mm board. With mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO it has great connectivity. Pi Zero Features: BCM 2835 SOC @ 1GHz 1GHz 512MB of RAM micro-SD mini-HDMI micro-B USB for data micro-B USB for power Unpopulated 40-pin GPIO connector Compatible with existing HAT addons Dimensions: 65mm x 30mm x 5mm

• Pi Zero is the heart of a Raspberry Pi on a tiny 65mm x 30mm board.
• With mini-HDMI, micro-B OTG USB, and the same 40-pin GPIO it has great connectivity.
• Pi Zero Features: BCM 2835 SOC @ 1GHz 1GHz 512MB of RAM micro-SD mini-HDMI micro-B USB for data micro-B USB for power Unpopulated 40-pin GPIO connector
• Compatible with existing HAT addons Dimensions: 65mm x 30mm x 5mm
• Suitable for any applications

User questions & answers

Question:	Is this a package of 9? How many come in the package
Answer:	Only one comes in package with no cables.
Question:	What is included? pizero, hub and camera
Answer:	Only the Pi Zero is included.
Question:	Does it have wifi
Answer:	Does not have wifi built in. You would need to use a usb hub and mini usb wifi adapter. Works great with the usb wireless adapter.
Question:	Isn't this suppose to be $5? Doesn't charging $40 defeat the purpose
Answer:	you can goto canakit dot com and order 1 (they only allow 1) for $5. They charge $9.95 for shipping though - so you'll probably want to get the power supply and maybe camera, sd card, or something else to make the shipping worthwhile.

Product description

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2. 4/5. 0 GHz wireless LAN, Bluetooth 5. 0, Gigabit Ethernet, USB 3. 0, and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market. Operating temperature: 0 – 50 degrees C ambient.

• Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz---4GB LPDDR4-2400 SDRAM
• 2. 4 GHz and 5. 0 GHz IEEE 802. 11B/g/n/ac Wireless LAN, Bluetooth 5. 0, double-true Gigabit Ethernet
• 2 × USB 3. 0 ports, 2 x USB 2. 0 Ports---2 × micro HDMI ports supporting up to 4Kp60 video resolution
• 2-lane MIPI DSI/CSI ports for camera and display--4-pole stereo audio and composite video port--Micro SD card slot for loading operating system and data storage
• Requires 5. 1V, 3a power via USB Type C or gpio-poep (power over Ethernet) enabled (requires PoE hat-not included)

User questions & answers

Question:	Can i connect a sata hdd to rbpi
Answer:	Yes
Question:	Does this fit a case for the model 3b+, by chance
Answer:	Hello, In 'PI400 KIT +13.3INCH LCD' color option, the 13.3'' display is included.
Question:	Does it come with a power cable (i am guessing it needs a usb-c cable
Answer:	Hello, A 16GB micro SD card is included, and pre-programmed with raspbian.
Question:	Does this raspberry pi 4 model b have the fixed usb-c port
Answer:	You will need a micro usb to DVI-D connection which is on your monitor. Or a female HDMI TO DVI-d adapter. I hook up mine to a spare HDMI port on my large TV.

Product features

Raspberry SC15184 Pi 4

• Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz
• 2. 4 GHz and 5. 0 GHz IEEE 802. 11b/g/n/ac wireless LAN, Bluetooth 5. 0, BLE
• 2 × USB 3. 0 ports, 2 x USB 2. 0 Ports
• Your tiny, dual-display, desktop computer and robot brains, smart home hub, media centre, networked AI core, factory controller, and much more with Raspberry Pi 4.

Completely upgraded, re-engineered Faster, more powerful

You'll recognise the basic shape and size, so you can simply drop your new Raspberry Pi into your old projects for an upgrade; and as always, we've kept all our software backwards-compatible, so what you create on a Raspberry Pi 4 will work on any older models you own too.

• Raspberry pi 3 model b adds wireless LAN and Bluetooth connectivity making it the ideal solution for powerful connected designs.
• Raspberry pi 3 use Processor chipest Boardcom BCM 2837 64 bIT ARMv7 Quad Core processor powered Singel Board Computer running at 1200MHz
• Raspberry pi 3 model b RAM : 1GB SDRAM@400MHz

User questions & answers

Question:	Are you selling web cam or raspberry Pi??? Why it is showing some camera photos on your listing
Answer:	Youtube search for: installing a 7” raspberry pie touch screen. Also I believe there was a website link on the box or somewhere on packaging
Question:	Can this record audio? Does it have a microphone
Answer:	Running Webmin on mine, it shows 3.81 GiB total
Question:	Does it come with a power source
Answer:	Running Webmin on mine, it shows 3.81 GiB total
Question:	Does the Ethernet port work and have a led light to show you its working
Answer:	I really don't know, but 212 F is pretty hot and I would doubt that it would work.

Product features

Raspberry pi 3 Model B Description

Raspberry Pi 3 Model B SBC

The Raspberry Pi 3 Model B looks identical to the Pi 2 B at first glance. It is the same size and has much of the same components on board. So what is the difference? The new Pi 3 brings more processing power and on-board connectivity, saving you time with the development of your applications. Perfect for your Internet of Things (IoT) designs.



Difference of Element 14 version pi 3 and UK version pi 3

The Element 14 version pi 3 is made in p.r.c,but with the same appearance and function with UK version.

They are the same thing but two versions of Raspberry pi 3 Model B



Pi 3 compare to Pi 2



More processor speed. The CPU on the Pi 3 is one and a half times faster at 1.2 GHz. Your Pi board performs better.



On-board connectivity. The Pi 3 features 802.11 b/g/n Wireless LAN and Bluetooth Classic & Low Energy (BLE). You can get connected much quicker without the need for any external device.



2.5 A power supply. With more processor speed and on-board connectivity, you'll need more power. Power supplies for previous Pi boards will not be sufficient. You will need the Official Raspberry Pi 3 Power Supply (9098126 — white) or (9098135 — black).



New components. The Pi 3 features a chip antenna where status LEDs were located previously. The status LEDs are still on the board, right next to the microSD card slot.



New to Raspberry Pi

The Raspberry Pi is a single computer board — developed to encourage and aid the teaching of programming and computing. It is also a fantastic starting point for the development of the Internet of Things (IoT) projects. The low cost and 'plug and play' nature of Pi makes for a board that is accessible to all and has numerous connectivity options. Pi is the perfect experimental tool, whether you want to use it as a desktop computer, media centre, server or monitoring/security device within your home. No limits. Linux-based operating systems run on the Pi with plenty of access to free software and downloads. What is more, there is a great Pi community out there — look at DesignSpark, the design engineer community at internet.



FAQ

1.Raspberry pi 3 operation system ?



Linux，Raspberry pi 3 support Raspbian,Linux and windows IOT.We recommend Raspbian（Designed for Raspberry pi-Debian）



2.Is there official language？

library supports python hardware support library, C / C + + hardware support library and bash hardware support library; the same can write their own language-driven library



3.How to connect keyboard and mouse?

USB connector.Recommend wireless keyboard.



4.Can raspberry pi 3 use touch screen?

Yes,it support 3.5 inch ,5 inch and 7 inch touch screen,Support 1080px output.All display needs install drivers