12 best seeedstudio arduino starter kits

• 【All in One Kit】The Grove Beginner Kit for Arduino is powered by one Arduino UNO compatible Board (ATmega320p based Seeeduino Lotus) together with 10 additional Grove Arduino sensors all in one piece of the board, including LED, Buzzer, OLED Display, Button, Rotary Potentiometer, Light Sensor, Sound Sensor, Temperature & Humidity Sensor, Air Pressure Sensor, 3-Axis Accelerator. It will bring you the simplest way to get started with Arduino.
• 【All Modules are Pre-Wired】All modules are pre-wired to the Seeeduino(Microcontroller) through the PCB stamp holes, no breadboard and jumper cables required. This is perfect for educational fields where frustrating wiring and soldering is no longer needed. Of course, you can also take the modules out and use Grove cables to connect the modules.
• 【12 Step by Step Tutorials】We've done all the hard work with example code and software libraries to help you running 12 different demos in just a few lines of code. Just contact us to get all the free resources and tutorials!
• 【Super Friendly to Beginner and STEAM Education】We have provided 12 step by step project tutorials and 74 pages PDF wiki, no matter you are a student, teacher, artist, hardware enthusiast, and so on, with the help of the Grove Beginner Kit for Arduino, you will get to know Arduino and start the Arduino project quickly. Just contact us to get all the free resources and tutorials!
• 【Compatible with 300+ Grove Modules】The Grove Beginner Kit for Arduino also compatible with over 300 grove sensors and modules. Grove makes it easier to connect, experiment, and simplify the prototyping process. No jumpers or soldering required. We have developed more than 300 Grove modules, covering a wide range of applications that can fulfil a variety of needs.

User questions & answers

Question:	Where is a link to the software
Answer:	George,I bought the MSI X99A SLI PLUS with the Intel Core i7-5820k which is the same socket as your board/cpu. Not only is it compatible, but it is keeping my cpu cooler than my friend's with a custom liquid cpu cooler. I highly recommend the Noctua NH-D15! If you have any further questions, don't hesitate to ask.~John
Question:	What is the difference between the two packages offered in this kit
Answer:	It should fit perfectly.This cooler height is 165mm and the case CPU cooler clearance is 180mm.
Question:	Which boards is the base shield compatible with
Answer:	using r5 with a ram that is not "compatible" (too tall) all you have to do is move the front fan a bit higher and it works like a charm. R5 has enough width to cover both regular fan layout and extended layout
Question:	You say "if you installed the portable arduino ide from usb drive, you can find all the module demos in the files -> sketch book" but there's nothing
Answer:	Yes it does, NT-H1 high-grade thermal compound.

Product features

Subvert the traditional Arduino kit

Unlike most Arduino kits, the Grove Beginner Kit for Arduino is an all-in-one kit, no breadboard, no soldering, even no wiring is needed. We cut all those muss and fuss, aiming to give you the best experience, you only need to focus on coding and Arduino Learning.

All the modules have been connected to the Seeeduino(Microcontroller) through the PCB stamp holes so no Grove cables are needed to connect. This is perfect for educational fields where frustrating wiring and soldering is no longer needed.

Of course, you can also take the modules out and use Grove cables to connect the modules. You can build any Arduino project you like with this Grove Beginner Kit For Arduino.

Plug and Play Unboxing Demo

The Grove Beginner Kit has a plug and plays unboxing demo, where you first plug in the power to the board, you get the chance to experience all the sensors in one go! Use the button and rotary potentiometer to experience each sensor demo!

• Scroll -> Rotating Rotary Potentiometer
• Select -> Short Press Button
• Exit Current Demo -> Long Press Button

Buzzer and LED module are used for key prompt.

Hardware Overview

Note: Dimensions - 17.69 * 11.64 * 1.88cm

1. Grove - LED: Simple LED module
2. Grove - Buzzer: Piezo Buzzer
3. Grove - OLED Display 0.96": 128×64 dot resolution High brightness,self-emission and high contrast ratio Big screen on a compact design Low power consumption.
4. Grove - Button: Momentary Push Button
5. Grove - Rotary Potentiometer: Adjustable Potentiometer
6. Grove - Light: Detects surrounding light intensity
7. Grove - Sound: Detects surrounding sound intensity
8. Grove - Temperature & Humidity Sensor: Detects surrounding temperature and humidity values
9. Grove - Air Pressure Sensor: Detects surrounding atmospheric pressure
10. Grove - 3-Axis Accelerator: Detects object acceleration
11. Seeeduino Lotus: Arduino Compatible Board with Grove Ports

Note: By default, Grove modules are connected to Seeeduino via PCB stamp holes. This means you don't need to use Grove cables to connect if not broken out.

Product description

Grove is a modular electronic platform for quick prototyping. Every module has one function, such as touch sensing, creating audio effect and so on. Just plug the modules you need to the base shield, then you are ready to test your ideas. This Grove Starter Kit Plus is a great way for beginners and students to get started with Arduino. The Grove Base Shield drops onto your existing Arduino and lets you connect up to 16 Grove modules without any fuss. The Arduino headers are still broken out on the top of the shield making it very easy to connect other breakout boards and sensors to your Arduino. You also get a guide book with basic projects to get you started and help you to understand how to create more complicated projected with your Arduino.

• For all Grove users (especially beginners), there are guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
• Documents
• Please visit the wiki page for more info about this product. It will be appreciated if you can help to improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum
• ]

Product description

Grove is a modular electronic platform for quick IOT prototyping. Every module has one function, such as touch sensing, creating audio effects, etc.. Just plug the modules in. No soldering required.   This Grove - Starter Kit for Arduino is upgraded version of our Grove Starter Kit plus. We included more frequently encountered modules in this kit to support your concept buildup.

• Comes with a great selection of Different Grove Devices
• No Soldering!
• Includes Grove Shield for Arduino (works with Arduino Mega2560 too!)
• Includes Grove Cables
• Prototype your IOT devices quickly

User questions & answers

Question:	Is this a good kit for beginners
Answer:	My best response is to carefully follow the setup instructions from the link. Its a slow process and easy to make mistakes. Also use the recommended Arduino IDE version then if you have issues find the simplest sketch in the examples to load that does not have ‘includes’, I think the version of one of those gives compiler errors.
Question:	How can this be connected to the internet
Answer:	Link to the seller is on the Amazon page for the item. I think it reads something similar to; this item sold by “ ????”. Select the seller name there should be a link. Secondly there is a lot of YouTube links for weather station set up using an esp8266/nodeMCU.
Question:	Is the based shield the same to base shield v
Answer:	Inside the plastic box there is a label with a URL to download from.
Question:	Is the based shield compatible with Intel Edison / Arduino kit
Answer:	After you buy it. Please send us a message on Amazon, we will reply you the guidance document URL link

Product description

Holding both an Arduino/Genuino 101

and a nice idea but don’t know where to start? This kit can help you on that.

It introduces the simplicity of Grove System

to your Arduino project.

The Grove Base Shield works perfectly on the Arduino/Genuino 101 or any development board that applies the Arduino Uno form factor.

With a bunch of well-chosen and plug-and-play Grove modules, you can set up a project and turn your idea into real thing easily and quickly.

Now check out the part list below to see what we’ve prepared for you!





Notice:

This kit DOES NOT

include the Arduino/Genuino 101.



KEY FEATURES



· Plug-N-play Grove system

· Easy-to-use base shield for Arduino/Genuino 101

· Various well-chosen Grove sensors and actuators for rapid prototyping





PART LIST



Sensors:

· 1 x Grove- Button

· 1 x Grove – Sound Sensor v1.2

· 1 x Grove – Touch Sensor

· 1 x Grove – Light Sensor v1.2

· 1 x Grove – Temperature Sensor v1.1

· 1 x Grove – Rotary Angle Sensor(P)

· 1 x Grove – Piezo Vibration Sensor



Actuators:

· 1 x Grove – LCD RGB Backlight

· 1 x Grove – Buzzer

· 1 x Grove – LED v1.3

· 1 x Gear Stepper Motor with Driver



Others:

· 1 x Grove Base Shield v2

· 10 x Grove Universal 4 Pin Cable

· 3 x Red LEDs

· 3 x Green LEDs

· 3 x Blue LEDs

• Plug-N-play Grove system
• Easy-to-use base shield for Arduino/Genuino 101
• Various well-chosen Grove sensors and actuators for rapid prototyping
• Grove port interfaced to save time and reduce difficulties for a novice
• All functional modules are fundamental and essential for learning.

Product description

Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and running with the Raspberry Pi quickly. Just slip the GrovePi+ board over your Raspberry Pi and connect sensors to the board, you’re ready to start hardware playing and prototyping with the powerful platform.



About The GrovePi+, It is stacked on top of the Raspberry Pi without the need for any other connections. Communication between the two occurs over the I2C interface. All Grove modules connect to the universal Grove connectors on the GrovePi+ shield via the universal 4 pin connector cable.



About Grove modules, which work on analog and digital signals, connect directly to the ATMEGA328 microcontroller on the Grove Pi+. The microcontroller acts as an interpreter between the Raspberry Pi and the Grove sensors. It sends, receives, and executes commands sent by the RaspberryPi.





The GrovePi+ is compatible with Raspberry Pi A+,B,B+/2.



Please be notice: The Raspberry Pi board is not included.



What is included:



1 x Grove pi+

1 x Grove - Temperature and Humidity

1 x Grove - Relay

1 x Grove - Ultrasonic Ranger

1 x Grove - LCD RGB backlight

1 x Grove - Buzzer

1 x GrovePi+ Guidebook

10 x Cables

1 x Grove - Sound sensor

1 x Grove - Light sensor

1 x Grove - Button

1 x Grove - Rotary Angle Sensor

1 x Grove - Red LED

1 x Grove - Blue LED

1 x Grove - Green LED



NOTE: The Raspberry Pi board is not included.

• Internet of Things Learning Kit.
• Includes the Grove Sensor Starter Kit with a variety of sensors.
• compatible with Raspberry Pi 3
• Grove is a modulated, ready-to-use tool set of sensors.
• GrovePi brings these sensors to the Raspberry Pi.

User questions & answers

Question:	What’s the “grove” come from? A Microsoft thing
Answer:	Do a google search on the part number for the sensor. An example is "KY-002" for Vibration sensor. You'll find pretty good examples both for Raspberry Pi and Arduino (which also works on ESP32 -my favorite microcontroller). Amazon discourages links as a security risk.
Question:	Does it come with connectors
Answer:	Search the web for the part number: "KY-0xx" and you'll find great reference materials for the parts.
Question:	Is this the same kit offered by Dexter Industries
Answer:	No manuals, just searched the web for examples based on the "KY-0xx" part number.

Product description

Established in 2011, ELEGOO is a thriving technology company dedicated to open-source hardware research & development, production and marketing. Our own Quality Management Team will secure the premium quality of our products and we would like to receive your valuable suggestions for our products and make your idea come true component listing: 1pcs Mega 2560 Controller Board 1pcs USB Cable 1pcs Breadboard 1pcs 65 Jumper Wire 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Tilt Switch 1pcs Photo resistor 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs Button (small) 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 5pcs Female-to-male DuPont Wire.

• The MEGA2560 complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
• Free pdf tutorial in the cd (more than 35 lessons)
• Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
• Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
• We have always cared about the customer experience and improve the product function details

User questions & answers

Question:	would this kit be appropriate for adult or would it be to easy
Answer:	Hi there! We're always working to test new devices, but right now the app is only compatible with Android and iOS devices. For a full list, visit LEGO.build/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can this kit be programmed with the arduino software (ide) available on arduino's page
Answer:	Hi there! This LEGO® set includes 9 characters, 3 vehicles, and building instructions. It also has a movie stage with a swiveling camera stand, a double-sided backdrop, and arms to move the ships and characters. The app is free to download through Google Play or the Apple App Store. For a list of requirements and compatible devices, take a peek at LEGO.com/DeviceCheck. Kind regards, Emily LEGO® Customer Service
Question:	Can children younger than 15 use this or is it too complicated
Answer:	Hi there! The app is currently only available for Android and iOS smartphones, though our developers are always looking to try it on new devices, and a tablet version may be available in the future. A tablet won't fit in the holder included in the set, though with some creativity and extra parts, you may be able to modify it a bit. Kind regards, Emily LEGO® Customer Service
Question:	The instruction cd i got along with this kit is blank. i'm unable to access any of pdf, code or libraries. how can i download this
Answer:	This is not a mini lego set. This arrives in a big box. Buy from Amazon seller Acebeach for same day shipping and handling.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo MEGA 2560 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo MEGA 2560 starter kit. The most essential parts in this kit are MEGA 2560 controller board and expansion board, which is a perfect clone with excellent product finish Compatible with Arduino projects. Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using a Mega2560 board and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it!

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

Product description

Component listing: 1pcs UNO R3 Controller Board 1pcs LCD1602 Module ( with pin header) 1pcs Breadboard Expansion Board 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs Joystick Module 1pcs IR Receiver 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Ultrasonic Sensor 1pcs DHT11 Temperature and Humidity Module 1pcs 9V Battery with DC 1pcs 65 Jumper Wire 1pcs USB Cable 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Potentiometer 1pcs 5V Relay 1pcs Breadboard 1pcs Remote 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 2pcs Photo resistor 1pcs Thermistor 2pcs Diode Rectifier (1N4007) 2pcs NPN Transistor (PN2222) 1pcs IC 74HC595 120pcs Resistor 10pcs Female-to-male DuPont Wire.

• Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
• The most economical kit based on Arduino platform to starting programming for those beginners who are interested.
• Lcd1602 module with pin header (not need to be soldered by yourself)
• This is the upgraded starter kits with power supply module, 9V battery with dc
• High quality kite with UNO R3. 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO.

User questions & answers

Question:	which charger i need
Answer:	This kit is easy to learn Arduino and very complete.
Question:	The CD the came with my kit was blank. Can anyone recommend a good tutorial for a complete novice
Answer:	Yes I program mine with A raspberry pi the zero-w to the pi 4 ,8 gig will work !!
Question:	What's the catch? It seems to good to be true
Answer:	It's definitely not too complicated as long as there's the interest, patience, and persistence.
Question:	Is the elegoo uno the same as an arduino uno or is it modified in any way
Answer:	Here is the link to download the latest version: https://www.elegoo.com/tutorial/Elegoo%20The%20Most%20Complete%20Starter%20Kit%20for%20MEGA%20V1.0.2017.10.31.zip

Product features

Compatibility with Official Arduino IDE, Software, Sendsors and Codes

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.

For the reason of open source, the manufacture of Arduino boards and software distribution by anyone is permitted. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.

Elegoo is one of the manufacturer on the market, whose clone products are compatible with the official Arduinomicrocontroller boards, they can use the official Arduino software, sensors and codes.

Learn Electronics and Programming with ELEGOO

The UNO boards can be used as the brains behind almost any electronics project. UNO can interact with buttons, LEDs, motors, speakers, GPS units, cameras, the internet, and even your smart-phone or your TV! By connecting the UNO board with a personal computer via a USB cable and uploading programs to the board, users can create digital devices and interactive objects that can sense and control objects in the physical and digital world like robots or even honest fortune-telling machines.

For this Elegoo Super Starter Kit, we provide a 24-lesson tutorial, introducing the basic setting of the software IDE, the working principles of the sensors and the simple program to enable the UNO board to control the sensors.

This Kit is suitable for 10-year-old and up. Younger kids should be under supervision and guidance of adults.

74HC595 and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

4 digit 7 segment display

7 segment displays consist of 7 LEDs, called segments, arranged in the shape of an “8”. Most 7-segment displays actually have 8 segments, with a dot on the right side of the digit that serves as a decimal point. When using 4-digit 7-segment display, the common anode or common cathode pin is used to control which digit is displayed. Even though there is only one digit working, the principle of Persistence of Vision enables you to see all numbers displayed because each the scanning speed is so fast that you hardly notice the intervals. By building the circuit and editing the program, users can make a simple display showing certain numbers, or more complexly, a count-up timer or a elecrical rolling dice.

Stepper Motor

Stepper motors are DC motors that move in discrete steps. They have multiple coils that are organized in groups called "phases". By energizing each phase in sequence, the motor will rotate, one step at a time.

With a computer controlled stepping you can achieve very precise positioning and/or speed control. For this reason, stepper motors are the motor of choice for many precision motion control applications.

the simplest way of interfacing a unipolar stepper motor to UNO board is to use a breakout

for ULN2003A transistor array chip, applying voltage to each of the coils in a specific sequence.

Product description

Microcontroller Microchip ATmega328P

Operating Voltage 5V

USB Standard Type B

Digital I/O Pins 14

PWM Digital I/O Pins 6

Analog Input Pins 6

Flash Memory 32 KB

SRAM 2 KB

EEPROM 1 KB

Clock Speed 16 MHz

• This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs
• Arduino Uno is the most used and documented board in the world
• "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0, now evolved to newer releases
• It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button
• Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users

User questions & answers

Question:	Does it come with a usb cable
Answer:	Made in Italy. Correct LED color and screen printing on mine. Don't know why the other reviewers had issues, but as of June 2013 the Arduino is authentic.
Question:	Are the boards sold by Mp3Car Store genuine? Order is fulfilled by Amazon but some sellers are selling fake boards
Answer:	Your best bet is probably gonna be contacting the manufacturer. Unless you can find lengths of key stock shaped the same, and cut down to what is needed... but that is just a guess. Good luck.
Question:	Do these come with the arduino.org label and not arduio.cc? There was a falling out and to support original founders they need to be arduino.cc
Answer:	The box says 16 3/4".
Question:	Is this an original Italy made Arduino?? or china product
Answer:	It comes with a set of 2 Jack stands.

Product description

The Arduino Engineering Kit Rev 2 provides extensive learning outcomes, giving students a strong understanding of basic engineering concepts through fun projects that create a collaborative learning environment. Students are able to connect what they learn with real-world industries, are encouraged to think critically, and improve their depth of knowledge by learning through experimentation. Ideal for advanced high school and college students. The Arduino Engineering Kit Rev 2 is a versatile, hands-on learning tool that demonstrates key control systems concepts, core aspects of mechatronics, and MATLAB and Simulink programming. The projects cover the basics of model-based design, control systems, image processing, robotics, signal processing, and more - plus they’re fun to do! The kit includes all the physical components you need, including learning materials and software, to build the three projects: a self-balancing motorcycle, a webcam controlled rover, and a drawing robot. There’s online step-by-step guidance, so it’s ideal for students working in small groups or for facilitating remote learning.

• The Arduino Engineering Kit Rev 2 is a versatile, project-based learning tool that demonstrates key control systems concepts, core aspects of mechatronics, and MATLAB and Simulink programming. The projects cover the basics of model-based design, control systems, image processing, robotics, and signal processing.
• This kit is designed for students aged 18+ who want a practical engineering mechatronics class. The content can be freely adapted to your own needs and curriculum: thanks to detailed content tutorials, it’s ideal for individual remote learning and extra curricular activities as well as classroom use.
• The kit contains six chapters. Three focus on Arduino, MATLAB, Simulink, and the fundamental concepts of mechatronics, and there are three step-by-step projects: Drawing Robot, Webcam controlled rover, and Self-Balancing Motorcycle. Each project has a detailed video with assembly instructions.
• Hardware components include: one Arduino Nano 33 IoT that features WiFi connectivity, one Nano Motor Carrier that allows easy control for servos, DC motors, and stepper motors. You also get 1 DC Motor (12V) with Encoders, 1 Standard Micro Servo, 1 Micro Geared DC Motor (12V) with Encoders, 1 USB webcam, several mechanical parts including shafts and pulleys, wheels, nuts & bolts, and 1 LI-ION 18650 Battery with a holder.
• Includes 1 free trial license for MATLAB, Simulink, and other add-on software, valid for 12 months.

Product description

This is the most complete kit for starters to learn programming for Arduino projects. It is very fun and easy to use. Kit is 100% compatible with all Arduino modules. The 63 parts are packaged in an attractive, convenient container. Component listing: 5pcs White LED 5pcs Yellow LED 5pcs Blue LED 5pcs Green LED 5pcs Red LED 1pcs RGB LED 5pcs 22pf Ceramic Capacitor 5pcs 104 Ceramic Capacitor 2pcs Photo resistor 1pcs Thermistor 5pcs Diode Rectifier (1N4007) 2pcs Electrolytic Capacitor (10UF 50V) 2pcs Electrolytic Capacitor (100UF 50V) 5pcs NPN Transistor (PN2222) 5pcs NPN Transistor (S8050) 1pcs Tilt Switch 5pcs Button (small) 1pcs 1 digit 7-segment Display 1pcs 4 digit 7-segment Display 1pcs Sound Sensor Module 1pcs LCD1602 Module ( with pin header) 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs UNO R3 Controller Board 1pcs Breadboard 1pcs Servo Motor (SG90) 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V 1pcs HC-SR501 PIR Motion Sensor 1pcs Ultrasonic Sensor 1pcs GY-521 Module 1pcs 3V Servo Motor 1pcs MAX7219 Module 1pcs Remote 1pcs 9V 1A Power Supply 1pcs 65 Jumper Wire 1pcs Water Lever Sensor 1pcs USB Cable 1pcs 9V Battery with DC 1pcs RC522 RFID Module 10pcs Resistor (10R) 10pcs Resistor (100R) 30pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male DuPont Wire.

• More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components.
• Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD.
• All the modules come soldered so they are easy to wire up.
• Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit.
• Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc.

User questions & answers

Question:	What type of LED lights are in this kit
Answer:	Used to design small circuits and small games. Not intended for lamps. Theese small diodes are not bright enough for lamps
Question:	My 15 yr old is into sound, motors and magnets and wants to take over the world. Is this the best kit out there
Answer:	The arduino has serial communication abilities that can be used to “connect” the devices and/ or let them exchange information. It may also be possible to use Bluetooth modules to let them communicate. Not exactly sure what this question is asking.
Question:	Is soldering required
Answer:	For this kit, the appropriate parameters for the adapter is：output 9V/1A DC Plug 5.5*2.1mm.
Question:	Is the elego uno the same as arduino uno? Is there any difference in the chips and the system
Answer:	Yes, our power supply module output is 5V, the access power is 9V/1A.

Product features

Starter kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo UNO R3 Starter Kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists compatible with Arduino projects, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics1 to take their first steps on electronics journey.

The most complete starter Kit with high quality components and sensors

Quantity and quality are both important here in Elegoo UNO R3 starter kit. The most essential parts in this kit are UNO R3 controller board and expansion board, which is a perfect clone with excellent product finish compatible with Arduino projects.

Besides, we offer other over 60 kinds of components and sensors from small parts like LED diodes, resistors and potentiometer to big parts like LCD1602, RFID module and 830 tie-points breadboard, which meet your demands for your different projects either it is simple or complex.

Sturdy quality is definitely the most important thing to Elegoo even with so many components provided we never compromised on the quality. Instead we keep improving our product quality in our own factory and we produce the products by ourselves under high standards and strict quality control. Pins and wires on some of the parts like LCD16502 and motors have been pre-soldered which is very convenient and saves your time.

74HC595 Shift Register and LEDs

74HC595 is a Serial to Parallel Converter which has eight outputs (perfect) and three inputs that you use to feed data into it a bit at a time.

This chip makes it a little slower to drive the LEDs (you can only change the LEDs about 500,000 times a second instead of 8,000,000 a second) but it's still really fast, way faster than humans can detect, so it's worth it.

74HC595 shift register is a type of chip that holds what can be thought of as eight memory locations, each of which can either be a 1 or a 0. To set each of these values on or off, we feed in the data using the 'Data' and 'Clock' pins of the chip.

LCD1602 Display module

LCD1602 module is a display that has an LED backlight and can display two rows with up to 16 characters on each row. You can see the rectangles for each character on the display and the pixels that make up each character. The display is just white on blue and is intended for showing text.

Lining up the display with the top of the breadboard helps to identify its pins without too much counting, especially if the breadboard has its rows numbered with row 1 as the top row of the board. Do not forget, the long yellow lead that links the slider of the pot to pin 3 of the display. The 'pot' is used to control the contrast of the display.

DC Motors and L293D Transistor

In this project you will learn how to control a small DC motor using an UNO R3 and a L293D transistor, which is a very useful chip. It can actually control two motors independently. We are just using half the chip in this lesson, most of the pins on the right hand side of the chip are for controlling a second motor.

L293D is quadruple high-current half-H drivers and designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is also designed to provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V and drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

Product description

ELEGOO Upgraded 37 sensor modules kit is the most useful and highest cost performance sensor kit in market. It is 100% suitable for beginners. And it is also 100% compatible with Raspberry PI and STM32. But if you want to use it with Raspberry PI and STM32, you may find the tutorial by yourself. We only offer the tutorial in our CD. The kit has only sensor modules, if you want to use it, you will need the wires and controller boards. Warning Tip: The input voltage of Elegoo Power Supply Module is 6. 5v - 9v (DC) via 5. 5mm x 2. 1mm plug . Please DO NOT over charge it otherwise it will burn your board and chips. Component listing: 1 x Joystick Module 1 x Relay Module 1 x Rotary Encoder Module 1 x DS-1307 RTC Module 1 x Ultrasonic Sensor Module 1 x HC-SR501 PIR sensor Module 1 x Flame Sensor Module 1 x Linear Hall Module 1 x Metal Touch Module 1 x Digital Temperature Module 1 x Big Sound Module 1 x Small Sound Module 1 x RGB LED Module 1 x SMD RGB Module 1 x Two-tone Color Module 1 x 7 Color Flash Module 1 x Laser Emit Module 1 x Shake Module 1 x IR Receiver Module 1 x IR Emission Module 1 x Tilt Switch Module 1 x Button Module 1 x Active Buzzer Module 1 x Passive Buzzer Module 1 x 18B20 temp Module 1 x Photo-resistor Module 1 x Temperature and Humidity Module 1 x GY-521 Module 1 x Photo-interrupter Module 1 x Tap Module 1 x Membrane Switch Module 1 x Avoidance Module 1 x Tracking Module 1 x Magnetic Spring Module 1 x Water Lever Sensor 1 x Power Supply Module 1 x LCD1602 Module (with pin header)

• Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit.
• Removed useless modules like light cup and mercury module, heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS1307 real time clock module etc.
• Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, listing paper, resistors pack only from Elegoo Team. There are tutorials in the CD that comes with. If you prefer download the tutorials online from the official website
• 100% compatible with Arduino official IDE, Raspberry Pi and STM32.
• Note: To use Elegoo starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

User questions & answers

Question:	Is there an available pdf version of the cd-rom
Answer:	This fingerprint scanner needs a micro controller with a firmware that can operate the fingerprints that are scanned and stored in the device. It works with a 3.3 to 6V DC power supply and the digital interface to the micro controller requires 3.3V to 5V. If you run it off a 9V battery, you will need a voltage regulator to power this fingerprint scanner as well as the micro controller.
Question:	ok for 8yr old
Answer:	Yes it is. However, you must buy the cable TTL Serial, this is crucial for establishing the connection with your arduino.
Question:	Are the data/specification sheets for the sensors provided
Answer:	The device works with power from 3.3V to 6V. It should work fine with 3.3V Raspberry Pi signals. Make sure you power the fingerprint module with the same 3.3V DC
Question:	Lesson 26: the tutorial does not give the meanings of the signal pins clk, dt, and sw. also, can anyone make sense of the "principle" text
Answer:	Yes you should be able to use it with rasp pi. Youll need the code which is python based. Here's a link to it. https://github.com/QuickGroup/pyGT511C3

Product features

Sensor kit that everyone can use to learn electronics and programming

Electronics is not as complicated as you imagine especially with Elegoo 37-in-1 sensor kit. For advanced users like professional lab engineers, electronic major students and experienced hobbyists for starters, they can use this kit to do various kinds of tests and experiments with so many sensors available at hand.

What about novice users who don't have any electronics knowledge? Fear not amigo. Just follow our tutorial enclosed and step by step you will come to realize that learning electronics is more fun than you ever expected with this amazing sensor kit.

It’s a good choice and perfect gift for your friends, family or kids who are obsessed with electronics, programming or robotics to take their first steps on electronics journey!

Detailed and easy-to-follow tutorial helps you learn electronics without problems

An enjoyable and educational experience is definitely the priority option to learn electronics. Our detailed tutorial with 31 lessons ranges from simple projects like how to monitor temperature and humidity with DHT11 sensor to complex projects like how to achieve the goal of timing control switch using a 1 channel relay module. Easy to understand and easy to follow.

Schematics and wiring diagrams are also presented in out tutorial, which helps you better understand why those sensors are connected in that way. Besides that we also have the IDE for programming codes ready in the CD and our website. If you are a professional and prefer a little DIY you can also edit the codes as you wished and make it more personalized.

DHT11 Temperature and Humidity sensor

DHT11 digital temperature and humidity sensor is a composite sensor which contains a calibrated digital signal output of the temperature and humidity. The dedicated digital modules collection technology and the temperature and humidity sensing technology are applied to ensure that the product has high reliability and excellent long-term stability. The sensor includes a resistive sense of wet components and a NTC temperature measurement devices, and connects with a high-performance 8-bit microcontroller.

HC-SR501 PIR Motion Sensor

PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. PIRs are basically made of a pyroelectric sensor, which can detect levels of infrared radiation. Everything emits some low level radiation, and the hotter something is, the more radiation is emitted.

GY-521 Triaxial acceleration triaxial gyroscope sensor

GY-521 six-axis sensor usually consists of two which are accelerometer and gyroscope. The GY-521 is a 6 DOF (Degrees of Freedom) or a six axis IMU sensor, which means that it gives six values as output. Three values from the accelerometer and three from the gyroscope. It is also a sensor based on MEMS (Micro Electro Mechanical Systems) technology. Both the accelerometer and the gyroscope is embedded inside a single chip. This chip uses I2C (Inter Integrated Circuit) protocol for communication.

Product description

Tutorials and Code:

This kit contains basic (Tutorial.pdf) and advanced (Processing.pdf) projects tutorials.

You can download the tutorials and code before purchasing:



https://git.io/JJJX6



Contents of Tutorial.pdf:

Preface

Chapter 1 LED Blink

 Project 1.1 Control LED by Manual Button

 Project 1.2 Control LED by Control Board

Chapter 2 Two LEDs Blink

 Project 2.1 Two LEDs Blink

  ...

(Download tutorial for details)

  ...

Chapter 24 Ultrasonic Ranging

 Project 24.1 Ultrasonic Ranging

Chapter 25 Solder Circuit Board

 Project 25.1 Solder a Buzzer

 Project 25.2 Solder a Flowing Water Light

Other Components

What's next?

Appendix



Contents of Processing.pdf:

Preface

 Processing Software

 First Use

Chapter 1 Voltmeter

 Project 1.1 Voltmeter

 Project 1.2 Voltmeter Dual Channel

Chapter 2 Oscilloscope

 Project 2.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

Chapter 4 Snake Game

 Project 4.1 Snake Game

 Project 4.2 Snake Game 3D

Chapter 5 Pong Game

 Project 5.1 Pong Game

 Project 5.2 Pong Game 3D

What's next?

• 273-page detailed tutorials (including basic electronics and programming knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 217 common items -> All parts needed to complete the projects in the tutorial. No soldering required.
• 51 interesting projects -> Each project has circuit diagram and tested code with detailed explanation.
• Extra advanced projects -> Make virtual instruments (voltmeter, oscilloscope) and game consoles.
• Get support -> Our technical service team is always ready to answer your questions.

User questions & answers

Question:	Can i have the listed specs gor the control board? (i.e. allowable input voltage, ram, flash, clock, etc
Answer:	Yes the male to female wires work for working with the raspberry pi’s GPIO pins to a breadboard. While the male to male work well for work on the breadboard itself. We’ve used these with our Raspberry Pi