11 best raspberry pi starter kit

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjgTR



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

  ...

(Download tutorial for details)

  ...

Chapter 26 WebIOPi & IOT

 Project 26.1 Remote LED

Chapter 27 Solder Circuit Board

 Project 27.1 Solder a Buzzer

 Project 27.2 Solder a Flowing Water Light

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 18 Infrared Motion Sensor

 Project 18.1 Sense LED

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 434-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 223 items for 57 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	are there any tutorials for how to connect everything?? Not looking for coding tutorials yet
Answer:	Dear customer, Thank you for your question. You can download tutorial first via link below: https://github.com/Freenove/Freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master.zip If you have any concerns, please feel free to contact us via Freenove support email. Best Regards, Freenove Support Team
Question:	Issues with the i2c module:the instructions you give in the tutorial are outdated and not applicable to the rpi3 and python3 - any suggestions
Answer:	Dear customer, We have update our tutorial(i2c configure) and code(Python) for customers. Now all Python code can run on Python 2 and Python 3. Please download again. Thanks for your question. Kind Regards, Freenove
Question:	Does it work with raspberry pi
Answer:	Dear customer, Yes, we have tested all projects in our tutorial . This kit works well with Raspberry Pi 4. And if you have any concerns, we offer technical support. Sincerely, Freenove Support Team
Question:	Are three 74HC595's used in one project? I broke one since the pins were ripped by me pulling it out of the breadboard too hard
Answer:	Dear customer, Thank you for choosing Freenove. I am sorry for the inconvenience. No, there is no project using three this chips. There just is a project using two this chips. If you broke more chips, you can contact us at [email protected] We will send you a new one for free. So don't worry. Sincerely, Freenove Support Team

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fjVYW



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 25 WebIOPi & IOT

 Project 25.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 17 Matrix Keypad

 Project 17.1 Calculator

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 423-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 204 items for 53 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	Is the rfid reader in this kit compatible with the mifare classic 1k rfid chipset
Answer:	Made in China.
Question:	Does this come with a case
Answer:	Pin 3.5.6.9.10.11 of UNO can use PWM. The general Arduino PWM frequency is about 490Hz, Pins 5.6 of Uno and the similar board can up to 980Hz, Pin 3.11 of Leonardo can reach 980Hz.
Question:	Does the protection plan cover components that don't work
Answer:	Thanks for your support and purchasing Elegoo products. The discount will be removed when the product is out of stock. But you don't need to worried beacause the product will be in stock in next few days and the price will be still $18.Best regards,Elegoo Support Team
Question:	Will this kit work with Raspberry Pi
Answer:	It is basically a kit to make various electronic projects with the uno controller cpu board. I have made various controller projects with mine. It contains-lots of varying parts that I put together to try on the proto board then after working out the bugs move it into a fixed project. Lots of fun and has a practical side as in the proto parts can be reused until a finished function is done.

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6Ag



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 16 WebIOPi & IOT

 Project 16.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 13 I2C-LCD1602

 Project 13.1 LCD

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 285-page detailed tutorials (including basic elec285-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 164 items for 38 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	Do u need a raspberry pi board for this kit? I wanna get into learning about coding, ect.? Thanks
Answer:	Yes. It works the same as a genuine arduino.

• Includes Made in UK Raspberry Pi 3 B+ (B Plus) with 1.4 GHz 64-bit Quad-Core Processor, 1 GB RAM
• Dual Band 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac Wireless LAN, Enhanced Ethernet Performance
• 32 GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit 2.5A USB Power Supply with Micro USB Cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ (UL Listed)
• Premium Raspberry Pi 3 B+ Case, High Quality HDMI Cable, 2 x Heat Sinks, GPIO Quick Reference Card, CanaKit Full Color Quick-Start Guide

User questions & answers

Question:	Could I hook a touch screen up to this and install Android on it with torque pro and google maps working
Answer:	NOOBS stands for New Out Of the Box Softwear. It is a piece of softwear put together by the people who design and build the Debian (Named for Debbie and Ian, hence Debian) software which is designed Especially for the Raspberry Pi. You will find it is the best choice and fit for the Machine itself. With the Canakit you get EVERYTHING you need to get started. By following their excellent instructions, you will soon be up and running. I believe they have just about thought of everything. Correct power supply, Power on/off switch, adapter for both power and Mini HDMI connectors and a fan powered case. With the NOOBS on the Micro SD HD card you can choose the OS you prefer from about 5-6 choices. I recommend Raspbian Buster, and the Elec one that supplies the Kodi installation of the OS. The HD card you are supplied is big enough to hold both systems. That way, you can dual boot to either one and live like a king. Enjoy the Raspberry Pi 4 You have one of the best single board computers ever built. Should give you years of "building" or "Makers" fun.
Question:	Where do the heat sinks go? The kit never covers it- just says not install them before putting the Pi in the case
Answer:	The heat sinks aren’t officially a requirement but since they are in the kit it makes perfect sense to put the on especially if you plan to run your pi with passive cooling. Mine also came with the fan.
Question:	Can you install windows
Answer:	A small fan is included, but it is not really required unless you are going to run the board hard with 24/7 computing projects. For distributed computing projects where the CPU is run at 100%, the fan will hold temps down by about 10 deg C with the heatsinks.
Question:	Is this compatable with an iPhone
Answer:	If he is into programming then yes, this is perfect for him and completely age appropriate. We got our son his first raspberry pi when he was 10 and he blows us away with his knowledge! It’s a great way to grow his curiosity and programming skills.

Product features

CanaKit Raspberry Pi 3 B+ Starter Kit

An exclusive Starter Kit from CanaKit that includes the fastest model of the Raspberry Pi family: The Raspberry Pi 3 Model B+ (B plus) and everything you need to get up and running within minutes in the exciting world of Raspberry Pi! The Raspberry Pi 3 Model B+ features a 64-bit quad core processor running @ 1.4 Ghz.

The CanaKit Raspberry Pi 3 B+ Starter Kit includes a premium Raspberry Pi case as well as a Samsung 32 GB EVO+ Class 10 MicroSD pre-loaded with NOOBS. Just Plug & Play!

What's in the box?

• Raspberry Pi 3 Model B+ (B Plus) with 1.4GHz 64-bit quad-core ARMv8 CPU (BCM2837B0) with 1 GB LPDDR2 SDRAM
• On-board WiFi and Bluetooth Connectivity
• 32 GB Samsung EVO+ Micro SD Card (Class 10) pre-loaded with NOOBS
• USB MicroSD Card Reader
• CanaKit PiSwitch (On/Off Power Switch for Raspberry Pi)
• CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 3 B+ (5-foot cable)
• Premium Raspberry Pi 3 B+ Case
• High Quality HDMI Cable with CEC support (6-foot cable)
• Set of 2 Aluminum Heat Sinks
• CanaKit Full Color Quick-Start Guide and GPIO Quick Reference Card

CanaKit Black Case

Premium quality ABS 3-piece plastic case specially designed for the Raspberry Pi 3 B+ with GPIO access.

CanaKit PiSwitch

Convenient On/Off Power Switch with LED indicator for the Raspberry Pi.

CanaKit 2.5A Power Supply

CanaKit 2.5A Micro USB power supply (UL Listed) is specially designed and tested for the Raspberry Pi 3 B+. This power supply incorporates a noise filter to provide the highest stability.

Samsung 32 GB EVO+

High performance EVO+ Class 10 MicroSD card pre-loaded with NOOBS.

Product description

Kit Includes



- Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)

- CanaKit Premium Clear Raspberry Pi 4 Case

- CanaKit Fan

- Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

- CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)

- CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

- Set of Heat Sinks

- CanaKit Quick-Start Guide

- CanaKit GPIO Reference Card

• Includes Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core CPU (4GB RAM)
• CanaKit Premium Clear Raspberry Pi 4 Case, CanaKit Fan, Set of Heat Sinks
• Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)
• CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

User questions & answers

Question:	Do i need a power suppy converter from 240 v to 110 v if i take this to europe ? or i just need to buy the power plug converter
Answer:	I bought this kit after I bought the Raspberry Pi 3B+ in the Spring of 2018. The Sunfounder site had downloads for both C and Python 2 code for it. It was apparent the code there was maybe a couple years old. When I started using the Thonny graphical interface for Python I discovered it required Python 3. I then I had to convert all the included Python 2 code to Python3. This turned out to be relatively easy. Since then Sunfounder has moved their downloads to GitHub where they are kept up-to-date. That means the download from GitHub includes C and Python 3 code. The download there also includes an updated user manual.
Question:	years old boy likes coding. Has laptop and school Chromebook. Is this still good Christmas gift or not really needed
Answer:	Yes
Question:	Does this have a rtc (real time clock
Answer:	The Raspberry Pi 3 has the same 40-pin GPIO set-up as the 2, so it is compatible.
Question:	Is this particular 4GB kit shipping with the v1.2 board revision c03112 yet? (per the output of `cat /proc/cpuinfo`
Answer:	The power supply module is for powering the breadboard when you are running motors or something else requiring more current than the RPi can handle. The RPi is only capable of 16 mA per GPIO. You power the power supply module with a 9V battery and the included adapter cable. The USB port on the module is an output, not an input.

• Includes Pi Zero W -Featuring :802.11 b/g/n wireless LAN-Bluetooth 4.1-Bluetooth Low Energy (BLE)
• 2.5A Power Supply Designed for Raspberry Pi-HDMI-Mini HDMI Adapter-Micro USB OTG
• Premium Black Case with 3 Covers-1 Closed Cover-1 with GPIO Access Cover-1 with Camera Mount Cover
• 40 Pin Header---Heatsink for Raspberry PI Zero--Camera Module Adapter
• All Parts Covered Under the Vilros 1 Year Warranty

User questions & answers

Question:	Where does the heat sink go? Is it just stuck to the top of the processor or does it go somewhere else on the board
Answer:	Python is included in the Raspian operating system along with the Thonny IDE that you'll use as your workspace to do your coding. The SD micro card you'll use to plug into the pi will have all that stuff on it and will set everything up for you the first time you boot it up. Watch those UTube videos and tutorials, they're priceless!
Question:	What game systems can this emulate smoothly
Answer:	No.
Question:	Is there a light that lights up when it gets power
Answer:	No case is included but yes you will need to pop it in a case or just put it on a non-conductive surface. The computer itself is complete other than the SDcard which will need have an image on it and put into the slot.
Question:	What is the minimum and maximum SD card this little guy can take
Answer:	I don't know the answer to the question you're asking but I want to expand on what you're asking. The original revision of the board has issues on the USB-C port had issues not working with LOTS of chargers as it was out of spec and caused thing's to be be identified as an audio device.

Product description

Important Notes:

This kit DOES NOT contain Raspberry Pi.



Supported Models:

Recommended:

 Raspberry Pi 400 / 4B / 3B+ / 3B



Also compatible:

 Raspberry Pi 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero



Tutorials and Code:

Come with 2 detailed tutorials (download needed, no paper tutorial).

One (Tutorial.pdf) uses C and Python, the other (Processing.pdf) uses Java.

You can download them before purchasing:



https://git.io/fj6AV



Contents of Tutorial.pdf:

Preface

Raspberry Pi

Install the System

Chapter 0 Preparation

 Component List

 Optional Components

 Raspbian System

 Remote desktop & VNC

Chapter 1 LED

 Project 1.1 Blink

Chapter 2 Button & LED

 Project 2.1 Button & LED

 Project 2.2 MINI table lamp

  ...

(Download tutorial for details)

  ...

Chapter 22 WebIOPi & IOT

 Project 22.1 Remote LED

What's next?



Contents of Processing.pdf:

Preface

 Install Processing Software

 First Use

Chapter 1 LED

 Project 1.1 Blink

 Project 1.2 MouseLED

Chapter 2 LEDBar Graph

 Project 2.1 FollowLight

  ...

(Download tutorial for details)

  ...

Chapter 16 Stepping Motor

 Project 16.1 Stepping Motor

App 1 Oscilloscope

 App 1.1 Oscilloscope

  ...

(Download tutorial for details)

  ...

App 5 Tetris Game

 App 5.1 Tetris Game

What's next?

• 3 programing languages -> C, Python (compatible with 2&3) and Java.
• 358-page detailed tutorials (including basic electronics knowledge) -> The download link can be found on the product box. (No paper tutorial.)
• 171 items for 47 interesting projects -> Each project has a circuit diagram and tested code with detailed explanation.
• Compatible models -> Raspberry Pi 400 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT contained in this kit)
• Get support -> Our technical support team is always ready to answer your questions.

User questions & answers

Question:	how do i get the tutorials
Answer:	This thing actually has nothing to do with the Raspberry Pi. It's an electronics kit, but there is no computer within the kit. Just various electronic components.
Question:	What DC power supply is needed for the breadboard
Answer:	84 x 55 x 8 mm
Question:	Is the compatible with the boolean box raspberry pi model 3 ? looking for something to expanded students learning
Answer:	i found it on their website, ive been looking all day, heres the link, click on the product and the zip file has all of the datasheetshttp://www.elegoo.com/download/

Product description

An exclusive Complete Desktop Starter Kit from CanaKit that includes the 4GB RAM version of the latest generation model of the Raspberry Pi family: The Raspberry Pi 4 4GB and everything you need to get up and running within minutes in the exciting world of Raspberry Pi! The CanaKit Raspberry Pi 4 Complete Desktop Starter Kit includes the Official Raspberry Pi Keyboard and Mouse. The Official Keyboard and Mouse feature an ergonomic design for comfortable use. The keyboard incorporates a built-in hub in effect adding three additional USB 2.0 ports to your Raspberry Pi. The kit includes the popular CanaKit Raspberry Pi 4 case to provide optimal ventilation and comes in a sleek white high-gloss finish, as well as a set of heat sinks. The included CanaKit low-noise fan helps keep the Pi 4 running cool and at optimal performance. The Raspberry Pi 4 features a 64-bit quad core processor running @ 1.5 Ghz. The CanaKit Raspberry Pi 4 Complete Desktop Starter Kit includes a high performance Samsung 32 GB EVO+ Class 10 MicroSD pre-loaded with NOOBS. Just plug in a monitor and play!



Kit Includes:



Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core ARMv8 CPU (4GB RAM)

Official Raspberry Pi Keyboard

Official Raspberry Pi Mouse

32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS

CanaKit Premium High-Gloss White Raspberry Pi 4 Case with Integrated Fan Mount

CanaKit Low Noise Bearing System Fan

Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter - Specially designed for the Raspberry Pi 4 (UL Listed)

CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4)

Set of Heat Sinks

USB MicroSD Card Reader

CanaKit Quick-Start Guide and CanaKit GPIO Reference Card

• Includes Raspberry Pi 4 4GB Model B with 1.5GHz 64-bit quad-core ARMv8 CPU (4GB RAM)
• Official Raspberry Pi Keyboard and Mouse
• CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan
• 32GB Samsung EVO+ Micro SD Card (Class 10) Pre-loaded with NOOBS, USB MicroSD Card Reader
• CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, CanaKit USB-C PiSwitch, Set of Heat Sinks, Micro HDMI to HDMI Cable - 6 foot (Supports up to 4K 60p)

User questions & answers

Question:	Can you connect an external USB hard drive for file storage
Answer:	This is very small gauge hook up wire and is not designed for voltages above 90 or 100 volts. They are fine for 12 to 48 volt systems with low current. Do not use them for 120 volt AC ! The insulation could break down and cause a fire or worse. The intended use is for 3.3 to 12 volt computer connections carrying signals that are low current.
Question:	can i connect to my pc and use its keyboard and use my pc's screen as a monitor so i can take it out like make it portable
Answer:	Yes, if you cut off the connectors the wires are 7 inches long. They are 9 strand wire and strip cleanly. These are actually 40 conductor ribbon cable with individual connectors on each end. The individual conductors separate easily. There are ten different wire colors.
Question:	Will the heat sinks and internal fan prevent the raspberry pi from overheating if I overclock it
Answer:	Yes it does. I don't have access to the unit at this time. You can use headers if you want to put on another board.
Question:	What noobs version is preinstalled
Answer:	This hat definitely works with Raspberry Pi 3 (Jessie) without giving up the Bluetooth. I went through the Adafruit tutorials too and got mine to work. I also Google searched "raspberry pi 3 serial port enable" and found the post "Configuring The GPIO Serial Port On Raspbian Jessie Including Pi 3 ..." quite helpful. You have to keep in mind that the Adafruit tutorials seem to be written for a Pi 2 (no bluetooth, one serial port) and so the serial port device of the GPIO Tx/Rx pins on a Pi 3 is /dev/serial1 (not /dev/serial0 as described in the tutorial).

• PROGRAMING LANGUAGES SUPPORT: C Code, Python Code(compatible with 2&3) are provided to learn raspberry pi for beginners
• 26 MODULES: There are 26 commonly used input and output components and modules and some basic electronic devices which can provide powerful assistance in programming learning.
• 40 PROJECTS PROVIDED: This Kit provides you with 40 lessons for reference and learning, including 36 basic I/o lessons and 4 simple practical examples.
• 331 PAGES DETAILED MANUAL (include basic electronics knowledge) and complete code. More details, please check the CD or visit the link on the CD to download.
• COMPATIBLE MODELS: Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (NOT included in this kit),

User questions & answers

Question:	One review says all projects now include Python code as well. Is this true? Link on Sunfounder's site still only has C code
Answer:	Yes, a servo motor is included. Thanks!
Question:	Is the 40-pin gpio extension board pre-assembled
Answer:	Yes, you can buy directly, it will take 7~14 days to the USA, and then we will send the lessons and code(Python & C) to you. Thanks!
Question:	Is this product compatible with raspberry pi 3? i saw that according to the description the gpio bread board is only compatible with raspberry pi
Answer:	The two pins are associated with the Uno R3. Since most pins have multiple functions, I am listing all that show up. They are physical pins 27 & 28, Port pins PC4 & PC5, Analog pins ADC4 & ADC5, Interrupt pins PCINT12 & PCINT13, Serial pins SDA & SCL.
Question:	What can i use to power the power supply module included in this kit? it doesn't seem to come with an adapter or usb cable
Answer:	The shield should work on the Uno R2. You need to be careful to properly orient the shield pins on the Uno R2 as there are four extra pins on the shield that have no mating connector on the Uno R2.

Product features

Reversing Alarm

In this project, LCD, buzzer and ultrasonic sensors are used to make a reverse assist system. You can put it on the remote control vehicle to simulate the actual process of reversing the car into the garage.

Password lock

The keypad and the LCD can be used to make a combination lock. The LCD will display a corresponding prompt for you to type your password on the Keypad. If the password is input correctly, “Correct” will be displayed.

Welcome

PIR can sense the movement of pedestrians. Used with servos, LED, buzzer,it can simulate the work of the sensor door of the convenience store. When the pedestrian appears within the sensing range of the PIR, the indicator light will be on, the door will be opened, and the buzzer will play the opening bell.

40 Projects for beginners

Lesson 1 Blinking LED

Lesson 2 RGB LED

Lesson 3 LED Bar Graph

Lesson 4 7-segment Display

Lesson 5 4-Digit 7-Segment Display

Lesson 6 LED Dot Matrix

Lesson 7 I2C LCD1602

Lesson 8 Active Buzzer

Lesson 9 Passive Buzzer

Lesson 10 Motor

Lesson 11 Servo

Lesson 12 Stepper Motor

Lesson 13 Button

Lesson 14 Slide Switch

Lesson 15 Relay

Lesson 16 Potentiometer

Lesson 17 Keypad

Lesson 18 Joystick

• 🍓【As Powerful As A PC】 8GB RAM Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. It is more than enough for real multitasking and productivity.
• 🍓【8GB RAM Starter Kit Offers Faster Performance】 8GB RAM cooperated with quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz gives full play to the CPU performance and RAM advantage. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K. Faster Gigabit Ethernet & Power-over-Ethernet support.
• 🍓【64GB Super LABISTS Micro SD Card】 Preloaded with Raspberry Pi OS (Raspbian), very easy to use for even beginners. LABISTS Raspberry Pi 4 Model B 8GB RAM Starter Kit also comes with a micro SD card reader which is compatible with USB-A & USB-C.
• 🍓【Offer Your Raspberry Pi 4 Better Heat Dissipation】Comes with a large metal heat sink and double fans for impeccable heat dissipation, easily control the temperature below 50 degrees. Holes on the top and bottom of the case ensure better heat dissipation.
• 🍓【Premium Raspberry Pi 4 Case with GPIO Access】Offers your Raspberry pi 4 good protection, easy access to GPIO port, HDMI port, USB port, SD Card slot of Raspberry Pi board. The aside gpio port of the case is convenient to connect GPIO devices and cables for easy operation.

User questions & answers

Question:	Hello! how long are the two microhdmi to hdmi cables? thanks for your response
Answer:	Simply put, no standard Raspberry Pi has a RTC. The new "Pi 4 Compute module" *will* have a RTC. ASSUMING you run the Pi on a network, the "NTP" service addresses accurate clock needs, by checking with NTP hosts and updating your clock to correct for periodic drift. If you run your Pi WITHOUT A NETWORK then it is more challenging to maintain time -- but you can either purchase a RTC module, OR a GPS module. Both of these will provide accurate time references to the Pi.
Question:	Does it come with mirco hdmi cables
Answer:	Mine responded with Hardware : BCM2835 Revision : c03112 Serial : xxxxxx Model : Raspberry Pi 4 Model B Rev 1.2 so the answer is yes
Question:	What are the two cords shown in the kit? They look like microHDMI-to-HDMI, but I don’t see anything about the cords in the kit description. Thanks
Answer:	Basically the same. There is no GUI, you have to image the SD yourself but this includes a very helpful guide for beginners. I chose this because of the controllers.
Question:	how do i run a lower temp its runnig hot
Answer:	No glue or special tools required. The heat sink had double stick tape on them and all you need is a small screw driver which it comes with.

Product features

LABISTS Raspberry Pi 4 Model B 8GB RAM Complete Starter Kit with 64GB Micro SD Card Preloaded Raspberry Pi OS (Raspbian)

Raspberry Pi 4 Model B 8GB RAM cooperated with quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz gives full play to the CPU performance and RAM advantage.

Impeccable Heat Dissipation Effect

Comes with a large metal heat sink and double fans for impeccable heat dissipation, easily control the temperature below 50 degrees. Holes on the top and bottom of the case ensure better heat dissipation.

5.1V/3A USB-C Power Supply

1.5M/5 Feet USB-C Power Supply with Noise Filter & On/Off Switch - Specially designed for the Raspberry Pi 4 (UL Listed); Features: 5.1V 3A, 15.3 Watts; Thick & durable, designed for low-loss power transfer.

Raspberry Pi 4 Case with GPIO Access

Offers your Raspberry pi 4 good protection, easy access to GPIO port, HDMI port, USB port, SD Card slot of Raspberry Pi board. The aside gpio port of the case is convenient to connect GPIO devices and cables for easy operation

• This complete kit comes with variety and quality of modules and components that you need compatible with raspberry pi.
• 2 programing languages -> C, Python (compatible with 2&3) are provided.
• Free Detailed Manual (basic electronics knowledge included) and complete code could be found on the CD. You can also download the tutorials form the official website or contact us by Email to get documents.
• This complete kit compatible with Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (Models are NOT included in this kit)
• Our technical service team is always ready to answer your questions.

User questions & answers

Question:	Will this kit work with the new Raspberry
Answer:	Unfortunately it does not support your parts as this motherboard is intended for Intel 8th or 9th Generations of CPUs and DDR4 Memory.
Question:	Does this work with Scratch on Raspbian
Answer:	Unscrew the screw at the end of the thermal guard, take the guard off. Install the NVME drive. Peel the plastic from the guard to reveal the thermal solution, then reinstall the guard and screw it in. I recommend using a magnetic screwdriver as it is a small screw.
Question:	what value are the 2 potentiometers
Answer:	Yes, but that is a pretty weak graphics card being paired with a powerful CPU.
Question:	does this come with the raspberry pi itself
Answer:	Yes it supports the 9900k,9700k,and 9600k. As well as 8th gen. Excellent vrm for real 5ghz overclock as well.

Product features

About REXQualis Complete Kit Base on Raspberry Pi

• REXQualis Complete Kit Compatible with Raspberry Pi including various components and modules that can create various interesting phenomena which you can get via some operation with the guidance of experiment instructions.
• In the light of the kit, you can learn some basic knowledge Compatible with Raspberry Pi, including the installation method, knowledge of Bash shell and GPIO. Having understood these knowledge, you can start programming.
• This Complete Kit Compatible with Raspberry Pi 4 Model B, 3 Model A+, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+, 1 Model A+, zero W and zero.
• Using the components and chips of the Kit, you can create different scenes and phenomena and explore more application by yourself.

FREE DETAILED TUTORIALS

31 Projects for Raspberry Pi beginners:

• 2 programing languages -> C, Python (compatible with 2&3) are provided.
• Free Detailed Manual (basic electronics knowledge included) and complete code could be found on the CD. You can also download the tutorials form the official website.

----- We are constantly updating the tutorials and projects, and will update the tutorials on our official website, you can download and use at any time.

Component listing: