10 best night vision camera for raspberry pi

Product description

Our IR-CUT Night Vision Camera plugs directly into the CSI connector on the Raspberry-Pi,

and features two high intensity Infrared LED spotlights for night time recording.

See what is happening even in the dark. Video Tutorial: https://www.youtube.com/watch?v=iJdJ8NEg9I4



Features:

Camera:

Built-in IR-CUT automatic switching filter, manual settings are not required.Compatible with all version of Raspberry-Pi

Pixels: 5 Megapixels

Photosensitive Chip: OV5647

Focal Length: 3.6 mm

Aperture (F) : 1.8

FOV (Diagonal): 75 degree

Sensor optimum resolution: 1080p

Size: 1.42 inches x 1.04 inches x 0.94 inches

Infrared Light: can fill flash

Photoresistor: to detect ambient light intensity

Adjustable Resistance: adjust the ambient light intensity threshold of the infrared light automatically. Dimming it, then the temperature of Pi Board will go down

4 Screw Holes: used for fixing and provides 3.3V power output



Package Including:

1 * 75 Degree 5MP OV5647 Camera board

2 * LED Lights

1 * 15cm FFC cable for RPI 4 3b+ 2b+

1 * 15cm FFC Cable for RPi Zero and Zero W

4 * Screws and Nuts

1 * Acrylic Holder

• Night Vision Camera - Link to see what is happening even in the dark. Video Tutorial: Please get the link from the product description below
• Built-in IR-CUT Automatic Switching Filter - In day or night, the dual filter automatically switches the filter for optimal imaging. Manual settings are not required, plug in then it can be used. The advantage is that during the day, the photographs taken will not be reddish
• HD Video Infrared Camera - Enjoy sharp 1080p video. It features two high intensity Infrared LED spotlights for night time recording and surveillance; 5MP OV5647 Camera - Support 1080P resolution, 3.6mm focal length, FOV (Diagonal) is 75 degree
• Comes with Hight Quality Acrylic Holder - Customized designed for this IR-CUT camera board and IR LEDs, make the camera stand or be mounted somewhere you like
• Comes with Two Adapter Cables - Compatible with Raspberry Pi Model 4B / 3B+ / 3B / 2B+ / 2B / B / Raspberry Pi Zero and Raspberry Pi Zero W

User questions & answers

Question:	Is there a case for this camera
Answer:	Right now, the Amazon listing has two sizes ("1-pint" and "single") but they have the same image so I'm not sure whether they're actually different. I bought it back when there was only one size. The base diameter is 8 inches, and the diameter of the open top is slightly over 11 inches.
Question:	Will this work with the model 1 B
Answer:	Without lip inner dimensions are about 7" at base and 8 1/2" at top.
Question:	is this compatible with the raspberry pi zero w
Answer:	Although I only put about 3 1/2 cups at a time I would say this bowl will hold 8-10 cups when filled completely.
Question:	Is this a plug and play camera? How to configure pi 3 to enable this. Thanks
Answer:	I measured it while it was sitting flat on the kitchen counter. It's 1 and 11/16 inches high.

Product description

Raspberry Pi Zero W Camera Night Vision Webcam 2 Infrared IR LED Light for Raspberry Pi Zero W



Description:

This is a night vision webcam camera for Raspberry pi zero W.



Features:

Raspberry Pi Zero/W Camera

5 megapixel OV5647 sensor



Camera specifications:

COMS size: 1/4inch

Sensor best resolution: 1080p

4 screw holes

Used for attachment

Focal Length: 2.1

Diagonal angle: 60 degree

Provides 3.3V power output

Dimension: 75mm x 25mm x 25mm



Note:

There is no raspberry pi zero board and FPC cable inside the package



Package Including

1 * Infrared Night Vision Webcam Camera Board

2 * Infrared IR LED Light

1 * cable for Raspberry Pi Zero/W

• Please note: The LED fill lights on both sides will warm up(generally in 40 to 50℃) when they working, but it is normal, please don't worry, they can keep working 20 hours, it will not damage the camera normally. You can adjust the micro adjustable resistor(beside the lights) to turned down the lights to Lower temperatures.
• SUPPORT TYPE:Raspberry Pi Zero /W，SUPPORT FOR PIXELS: The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p 30 fps, 720 p 60 fps and 640 x480 p 60/90 video recording
• SENSOR: 5 megapixel OV5647 sensor ,Supports up to 2 infrared LED and/or fill flash
• SUPPORT VERSIONS: Raspberry Pi Night Vision Camera, supports all revisions of the raspberry pi(raspberry pi 2/3 need change ffc cable); Note:There is no raspberry pi zero board and FPC cable inside the package.
• When using this camera, please note: Normal problems: 1.The computer doesn't recognize the camera; The LED lights doesn't work (including one on and one off); The camera doesn't work after a period of use. Solution: Tighten the bolts of the LED and camera, then restart it. 2.The LED lights always turn on no matter if the camera is turned on or not. Solution: Connect the power supply to GPIO, then the LED light will be on only when the camera is turned on.

User questions & answers

Question:	What is the recommended board for the IMX219? (link please
Answer:	This bowl is made in India
Question:	Does it fit the official pi zero case? Looks like additional holes needed for the led
Answer:	The bowl I received is 7.5 inches inside the rim, & 8.3125 (8 & 5/16) inches outside the rim.
Question:	Do i understand correctly that the cable shown in all your display pictures is not included with the camera
Answer:	Thank you for your interest. Our bowls contain no radiation.
Question:	Does it support outputting a H.264 encoded video stream
Answer:	I wash it by hand most of the time, it doesn't say ANYTHING on the bottom of the bowl, I THINK that I have put it in the dishwasher before, but truly can't remember. SORRY!!
Question:	Does this come with the ribbon cable to attach to the Rpi
Answer:	I gave them to someone as a gift so I don't remember for sure, but I think 1 1/4 to 1 1/2 inches.
Question:	is the ir device compatible with the pi 2 aswell
Answer:	I have a couple of times and it did not spark, however I don't know how it would with stand if frequently use in the microwave.
Question:	Does this come with the IR LEDs as shown in the picture
Answer:	The smallest fish bowl holds about one and a half cups of cat food
Question:	Can the IR LEDs be turned on and off through software
Answer:	Yes they are stackable. But, they are very light. My cat pushes it around sometimes.

Product description

Features:

5 million pixels, supports up to 2592 * 1944 size image output

The sensor itself has a native resolution of 5 megapixel, and has a fixed lens on board.

The board itself is tiny, at around 2.5*2.4*1.7cm

The camera module is supported for Raspberry pi B 3/2, the preferred operating system for Raspberry Pi 15 cm flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector.

Specifications:

Pixels: 5 Million Pixels

Compatible: for Raspberry pi B 3/2

Chip: OV5647

Highest resolution: 2592*1944

Viewing Angle:130 °

Size: 2.5*2.4*1.7cm / 0.98*0.94*0.67in

Weight: 7g

Package includes:

1 x Camera Module

• 5 million pixels, supports up to 2592 * 1944 size image output
• 15 cm flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector.
• The sensor itself has a native resolution of 5 megapixel, and has a fixed lens on board.
• The board itself is tiny, at around 2.5*2.4*1.7cm
• The camera module is supported for Raspberry pi B 3/2, the preferred operating system for Raspberry Pi

Product description

Raspberry Pi 4 Camera IR-CUT Night Vision Camera Module for RPI 4 Model B Raspberry Pi 3 Better Image in Both Day and Night

What is the Raspberry Pi IR-CUT Camera?

The Raspberry Pi IR-CUT Camera is the day and night camera.

You can get the best imaging whatever it is in the daytime or at night.

It's a built-in IR-CUT camera, can be used during the day and night, When the camera at the daytime will switch to day mode, the camera image is a normal color image, When the camera at night will switch to night mode, the camera can normally identify the infrared fill light Of the light, which can be set through the software switch, to solve the other night vision version camera during the day to take pictures of the image color is not normal.

Features:

Raspberry Pi Camera, supports Raspberry Pi 4 Model B,Raspberry Pi 3 Model B/B+

Embedded removable IR-CUT filter, eliminating color distortion in the daylight

Comes with infrared LED, supports night vision

5 megapixel OV5647 sensor

Camera specifications:

CCD size : 1/4inch

Aperture (F) : 1.8

Focal Length : 3.6mm adjustable

Field of View : 75.7 degree

Sensor best resolution : 1080p

4 screw holes

Used for attachment

Provides 3.3V power output

Supports connecting infrared LED and/or fill flash LED

Dimension: 31mm × 32mm

Packing List:

Raspberry Pi IR-CUT night vision camera × 1 pcs

LED Flashlight × 2pcs

FCC cable × 1 pcs

Note: Raspberry Pi board is not included.

• Raspberry Pi 4 IR-CUT night vision camera
• Support Raspberry Pi 4 Model B, Raspberry Pi 3 Model B/B+
• This IR camera module can catch better image in both day and night
• It comes with 5MP OV5647 sensor, 3.6mm adjustable Focal Length and 2pcs LED Flashlight
• We provide returning service. Just feel free to buy. If you have any problem, We will accept returning immediately.

User questions & answers

Question:	Do the LEDs turn off during daytime
Answer:	Sorry the standard packing inside is without the storage solution and buffer solution. Meter has been already calibrated and you can use directly. You can use tap water for storage liquid (can not use distilled water), buffer solution to replace, just make sensor not dry.
Question:	Will all features of this work with a pi zero wh
Answer:	All you need in addition is a cup of distilled water for rinsing the probe
Question:	What video format does the came the video in? Does it support H
Answer:	It Is for testing water. The portable PH detector has high product accuracy and stable work. It can measure the PH value of the solution and display the temperature of the measured liquid, which is widely used in the fields of industry, electricity, agriculture, medicine, food, scientific research and environmental protection. Water quality testing, sewage treatment, food acid-base measurement, agricultural use measurement, cosmetics measurement, aquaculture water pH measurement
Question:	How close are the 2 images' time apart? Is this good for capturing 2 image at exactly the same time
Answer:	The other one has a little holes for calibrating would you insert a small bladed screwdriver in the big dials are used for temperature calibration

Product description

Camera Module Specifications



CCD size: 1/4 inch

Focal Length: 2.1

Field of View: 160 degrees

Sensor Best Resolution: 1080p

Dimension: L 0.98inch x W 0.94inch x H 0.63inch

Support 3.3V power output

4 screw holes whiche are used for a fixed position

Supports connecting infrared LED or flash LED





Package Content



1 X 5MP Camera Module

1 X 15cm FFC cable

• Raspberry Pi Camera Module with 160 degrees fisheye wide angle for Modle A/B/B+,Pi 2B Pi 3B/B+ and Pi 4B
• The Camera Module Specifications is 2592 x 1944 Pixel Static Images, 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 Video Recording,5 Megapixel sensor OV5647
• It has CSI Interface carries pixel data from the camera back to the processor, BY THE WAY with pi zero ribbon cable can be used on zero board
• Exterior size is L 25mm x W 24mm x H 16mm（L 0.98inch x W 0.94inch x H 0.63inch )
• You will get 1pcs Camera Module,1pcs 15cm（5.9inch) FFC Cable, Happy shopping ^_^

User questions & answers

Question:	This module has autofocus
Answer:	They have done well. I put them in the dishwasher most of the time but they also hand wash well. These are good bowls, but with that being said PetSmart has the next size up for 6.99 that hold up the same. It just depends if you want the convenience of amazon or if you're already having to go to PetSmart for dog food.
Question:	On camera(06) what is the minimum focus distance
Answer:	Thank you for your interest! These bowls are made in India.
Question:	can you use the acrylic mount for this module
Answer:	no
Question:	I need an infrared camera to give me temp readings of people and objects . can I use this for thermal imaging
Answer:	Not exactly the easiest to measure, but a tape measure says the inside diameter at the bottom is 6.25 inches. Hope this helps.

Product description

Kingjinglo was founded in 1999. We are committed to providing consumers with quality products and services.

Descriptions:

100% brand new and high quality

Specifications:

Size:25 x 23 mm / 0.98 x 0.91 inch

Color:Green / Black



Packages Included:

1 Piece Camera

1 Piece Flex Cable



Note:

Please allow 1-2cm errors due to manual measurement.

Because of the different display of each computer, the pictures may not reflect the actual color of the item.

• Support infrared night vision function, can switch day and night mode, night vision picture clearer.
• With high-definition camera quality, bring pure and exquisite picture quality experience, the image is clearer.
• The day&night vision camera perfectly compatible with Raspberry Pi series 4B/3B+/3B/2B Model.
• The product is made of high quality materials, quality is guaranteed, is a durable electronic products
• The product includes 1 piece night vision camera,1 piece flex cable.

Product description

Kit A contains

Camera 3D printing shell set + infrared night vision camera

Kit B contains

Camera 3D printing shell set + infrared night vision camera + Raspberry Pi Zero W+16GmicroSD card + heat sink + 5V / 3A with switching power supply

Note:

1. This kit uses infrared night vision camera, which will have a certain reddishness during daytime shooting, which is normal.

2, if you buy a kit with a raspberry pie motherboard, the default pin is not welded

3, the shell has been equipped with screws and screwdrivers, no need to separately purchase mounting screws and tools.

Camera parameter description:

Viewing angle: 60 degrees

Pixel: 5 million

Aperture (F): 1.8

Photosensitive chip: OV5647

Sensor pixel: 1080P

Fill light infrared band 850NM

Effective distance for night vision: 1-2 meters or less

Focal Length: 3.6MM adjustable focal length

• Kit A contains Camera 3D printing shell set + infrared night vision camera
• Kit B contains Camera 3D printing shell set + infrared night vision camera + Raspberry Pi Zero W+16GmicroSD card + heat sink + 5V / 3A with switching power supply
• This kit uses infrared night vision camera, which will have a certain reddishness during daytime shooting, which is normal.

• Day/Night Camera - IR Cut filter switched in and out automatically. A NoIR camera that keeps videos and images from washed out or looking pink yet still offers a decent night vision
• Raspberry Pi Compatible - Work on Raspicam commands and Python scripts. Support Raspberry Pi Zero, Pi 4, 3 b+, Pi 3, Pi B/2B/B/B+/A
• Better Low Light Performance - IR corrected lens to reduce focus shift at night, and IR LED illuminator to improve the lighting condition
• Typical Usage Scenarios - Home security and surveillance, motion detection, time-lapse photography and other Raspberry Pi camera projects
• Accessories - 2 heat sinks for IR LED boards and 1 ribbon cable for Pi Zero included. Contact Arducam for more lens options, technical support and customer services

User questions & answers

Question:	You say you can "screw the lens out a little from the thread to manually focus it." I see the threading but am unable to turn the lens. How
Answer:	Yes, this camera module fully compatible with Jetson Nano/Xavier NX with a camera connector and offers a mechanical IR cut-off filter switched automatically based on light condition.
Question:	Does this camera work with motioneyeos for both day and night camera work, with the ir lights on during the low light conditions
Answer:	Hi, this camera module can't work with Raspberry Pi, please contact Arducam via [email protected] to get the version for Raspberry Pi.
Question:	Well this work on a pi zero
Answer:	Thanks for your questions.It need an LED for night vision and it also need to switch to night vision mode. Thanks!
Question:	The pictured camera has 3 photo resistors. Does this camera have them? I need a camera that auto-switches from day/night without using a script
Answer:	The seller seems to have misunderstood your question:Yes the shutter is mechanical which allows you to take photos with or without the IR-cut filter.When the side pieces are connected it works off of photocells on the LED boards. If you want to manually control it you can do so by connecting it to GPIO see the (sparse) docs for a small bit of more detail http://www.waveshare.com/wiki/RPi_IR-CUT_Camera

Product description

Specification:

Condition: 100% Brand New

Item Type: Night Vision Camera

Material: PCB

Color: As Pictures Shown

Pixel: 5MP

Chip: Photosensitive Chip OV5647

Camera Parameters:

CCD Size: Approx. 1/4in

Aperture (F): 2.35

Focal Length: Adjustable

Field of View (Diagonal): 130°

The Best Pixel of the Sensor: 1080P

Application: For Raspberry Pi 4B/3B+/3B/2B

Package List:

1 x Camera

• There are 4 screw holes, which can be used to fix the position, very convenient for you to use.
• Support 3.3V external power supply, and access to fill light, so it can shoot clear night view.
• Adjustable focal fish eye lens gives you a wide respect of view, up to 130 degrees, you can adjust it in your will.
• The camera is so small in size, light weight amd easy to take with and will not take up much f your space.
• The camera module is very popular in home security applications, and in wildlife camera traps.

Product description

Description:

This product is Raspberry Pi Camera Module, Supports Night Vision;

This camera can Adjustable-Focus. Supports Raspberry Pi 3B/3B+ and Pi 2B B+；

5 megapixel OV5647 sensor;



Specifications:

COMS size: 1/4 inch

Aperture (F): 1.8

Focal Length: 3.6MM (adjustable)

Diagonal: 75.7 degree

Sensor best resolution : 1080p

4 screw holes

Used for attachment

Provides 3.3V power output

Supports connecting infrared LED and/or fill flash LED

Dimension: 25mm * 24mm



Package Including

1 * RPi Camera

2 * Fill light

1 * 15-pin FFC

1 * Camera Case

• 5 Megapixel Ov5647 sensor, supports up to 2 infrared LED and/or fill Flash
• Supports connecting infrared LED and/or fill flash LED. This camera support to Raspberry Pi 3B/3B+ and Pi 2B B+
• Provides 3.3V power output. Diagonal : 75.7 degree; Sensor best resolution : 1080p.
• The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 P @ 30 FPS, 720 P @ 60 FPS and 640 x480 P 60/90 video Recording

User questions & answers

Question:	Does it work with a raspberry pi zero w
Answer:	The bowls are removable.
Question:	Is there a way to increase or decrease the IR sensitivity
Answer:	Comes with stand and 2 stainless steel bowls
Question:	Does it work with raspberry pi 4b
Answer:	as the 4 quart came with 2 4 quart bowls - i would assume 2 1 qt bowls --
Question:	Will the IR lights automatically turn off based on the lighting
Answer:	Sorry, I have not used them, they were bought for some new out side runs, I will not use them for a month.