14 best dac for raspberry pi
A DAC (Digital-to-Analog Converter) for a Raspberry Pi is an electronic component or module used to convert digital audio signals into analog signals that can be played through speakers or headphones.Here's what you should know about DACs for Raspberry Pi in the context of Single Board Computers, Computer Components, Computers Accessories, and Electronics:
Purpose: The Raspberry Pi, by default, outputs audio through its HDMI and 3.5mm audio jack as digital audio signals. However, to achieve higher audio quality or connect to high-end audio equipment, you may want to use a DAC. A DAC ensures better sound quality by converting the digital audio into a high-quality analog signal.
Compatibility: DACs for Raspberry Pi are designed to be compatible with the Raspberry Pi's GPIO (General Purpose Input/Output) pins. They can be attached directly to the Raspberry Pi's header, making them easy to install.
Audio Quality: The quality of the DAC greatly influences the audio output. Higher-end DACs can provide audiophile-grade sound quality, with improved clarity, dynamic range, and reduced noise compared to the built-in audio output.
I2S Interface: Many Raspberry Pi DACs use the I2S (Inter-IC Sound) interface, a standard protocol for transferring digital audio data between chips. This interface allows for a direct and high-quality digital audio signal transfer.
Software Support: To use a DAC with a Raspberry Pi, you may need to install specific software drivers or configure the Raspberry Pi's settings to recognize and utilize the DAC. Popular DACs often have community-supported drivers and software.
Audio Formats: DACs can support various audio formats and sample rates, ensuring compatibility with different types of audio content. This includes standard formats like MP3, FLAC, and WAV.
Output Options: DACs may provide various output options, such as RCA connectors, 3.5mm headphone jacks, or optical outputs, allowing you to connect them to different audio systems.
Power Requirements: Some DACs draw power from the Raspberry Pi itself, while others require an external power source. Ensure that your power supply meets the requirements of both the Raspberry Pi and the DAC.
Use Cases: DACs for Raspberry Pi are popular among audiophiles and hobbyists who want to build high-quality audio systems, including music players, streaming devices, or home theater setups using their Raspberry Pi.
Cost: The cost of DACs for Raspberry Pi can vary widely depending on their features and audio quality. Entry-level DACs are affordable, while high-end models can be more expensive.
When selecting a DAC for your Raspberry Pi, consider your audio quality requirements, compatibility with your audio equipment, and any specific features you may need. Additionally, ensure that you follow the manufacturer's instructions for installation and configuration to achieve the best audio performance.
Below you can find our editor's choice of the best dac for raspberry pi on the market
innomaker Acrylic Case DAC Hat HiFi Audio Module Works with Raspberry Pi 4 3B+ 3B 3
Product description
Acrylic Case for Raspberry Pi HiFi DAC HAT
Packing List: 1 x Acrylic Case; 5 Group Screws.
- Packing List: 1 x Acrylic Case; 5 Group Screws.
- Acrylic Case for Raspberry Pi HiFi DAC HAT
- The HiFi DAC Hat compatible with Raspberry Pi 4/3B+/3B/3 with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
- InnoMaker DAC Hat support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
- HiFi DAC Hat on-board Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
User questions & answers
| Question: | I understand this is for raspberry pi 4 3b+ 3b 3. any recco for a case that works with innomaker raspberry pi hifi dac hat and raspberry pi zero |
| Answer: | I use it with a Pi3B and the DAC - works great! |
Audio DAC HAT Sound Card (Audio+) for Raspberry Pi Zero/A+ / B+ / Pi 3 : Pi 4 / Better Quality Than USB
Product description
Perfect if you want to have better audio quality and listen to music on your hi-fi system ! Use the jack or RCA to plug it to your stereo or amplified speakers. It can be used for high quality audio for home entrainement systems, using Raspian, Volumio or for art installation. The quality is far superior than the existing jack of the rspberry pi 4 or 3, and less ressource consuming than USD sound card, meaning less latency and CPU overhead. No cables or soldering required
- DAC I2s 24-bit audio with studio sampling quality
- Line out stereo 3.5mm jack for stereo input
- software volume control
- DAC I2s 24-bit audio with studio sampling quality with Line out stereo 3.5mm jack
- Compatible with Raspberry Pi Zero / Pi 2 / Pi 3 Pi4
User questions & answers
| Question: | Is this just the Audio+? Is the Mic+ still available |
| Answer: | We are currently out of stock in the USA of MIC+, I will send some more stock ealy next week, so it should be baack in stock around the 23rd of June. |
| Question: | Are you able to get this working running Retropie |
| Answer: | With great difficulty I got it working in combo with a LCD and battery shield giving me a portable retropie |
| Question: | How do I attach the 2 jacks |
| Answer: | The audio 3.5mm jack is aleady connected, the RCA connector needs to be inserted then soldered in position. |
| Question: | Is this only audio output or is it also stereo analog input |
| Answer: | Output only, I think. There is very little information on this thing. Mine didn't come with the RCA connectors, but tracing the leads on my board that go to the RCA connectors, they connect to 3.5 stereo connector. I used this board on a Zero, and my Zero setup didn't really like alsa audio, and it really wants HiFiBerry. The application wanted Alsa, so, I'm using the Phat DAC on the Zero, and I got a VAlinks 6 Channel External Sound Card $12.79 (USB to Input and output) The output has stereo, 5.1, and fiber in and out. The input has both Mic and Consumer Line levels. Small box works on both Pi3 and Zero. |
Raspberry Pi 4B/3B+/3B Full-HD DAC I2S Class-D TI PCM5122 Amplifier, X400 V3.0 Audio Expansion Board Sound Card | Music Player for Raspberry Pi 4 Model B/Raspberry Pi 3 Model B+ / 3 Model A+
- Matching Metal Case for X400 V3.0 and PI 4B refer to ASIN: B07ZRNNB29
- Wide range voltage 6V-26V input, it provides up to 60W power. Matching power supply refer to ASIN: B07NLR49L1
- With manual volume adjustment switch; User manual, please refer to raspberrypiwiki (X400_V3.0).
- Built in High quality Class-D stereo audio amplifier (TI TPA3118D2) & audio headphone amplifier (TI TPA6133A);
- Onboard RCA connectors, 3.5mm stereo headphone jack, speaker & power screw terminals, and gold-plated high-current DC power jack;
User questions & answers
| Question: | The description claims this is i2s amplifier. where is i2s input? not shown on any of the connectors |
| Answer: | Hi friend, It is via the 40-pin GPIO header. Regards, Geekworm Team |
| Question: | Does it improve the on board sound thru the hdmi on the pi |
| Answer: | No. The DAC/HAT is more like a sound card that you install in a computer, except it is connected on top of a Raspberry Pi board. It allows you to use various kinds speakers but it doesn't improve it through the hdmi. |
| Question: | Does it require power supply |
| Answer: | Power Conversion is: AC 100-240v to DC 12V 3A Power Supply Adapter Size of connector is: DC 5.5*2.1mm UL Listed FCC |
| Question: | What type of socket is the 4 pin power output socket that is next to power input barrel socket |
| Answer: | Hello dear friend, We have consulted for help, the type of 4 pin power output socket is JST XH2.5. For more information, please refer to: http://www.raspberrypiwiki.com/index.php/Supstronics_X400_Expansion_Board_for_Raspberry_Pi_2_Model_B_/_Raspberry_Pi_B%2B_(SKU:396299) |
High-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC
Product description
Overview
There's no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won't be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi.
Features
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate
- Onboard DAC8532, 2ch 16bit high-precision DAC
- Onboard input interface via pinheaders, for connecting analog signal
- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules
- Onboard input/output interface via screw terminals, for connecting analog/digital signal
- Features AD/DA detect circuit, easy for signal demonstration
Development Resources
https://www.waveshare.com/wiki/High-Precision_AD/DA_Board
Package Content
High-Precision AD/DA Board x 1
RPi screws pack (2pcs) x 1
- There's no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won't be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate Onboard DAC8532, 2ch 16bit high-precision DAC
- Onboard input interface via pinheaders, for connecting analog signal- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules
- Onboard input/output interface via screw terminals, for connecting analog/digital signal Features AD/DA detect circuit, easy for signal demonstration
User questions & answers
| Question: | What's the maximum voltage range for the ADC |
| Answer: | Hi，That depends on, it can work in some situations. It should depend on the module you used pinout,IC address(should change by hardware) |
| Question: | Are the i2c pins still available for use after plugging in this board |
| Answer: | Hi，That depends on, it can work in some situations. It should depend on the module you used pinout,IC address(should change by hardware) |
| Question: | Is this product compatible with the raspberry pi 4B |
| Answer: | Hi, yes, this High-Precision AD/DA Expansion Board can be compatible with the raspberry pi 4B. |
SainSmart HiFi DAC Audio Sound Card Module I2S Interface for Raspberry pi B+ 2
Product description
Features
- This is a special HIFI DAC expansion board designed for the Raspberry pi B+ ,using TI's DAC chip (PCM5122), using an I2S interface;
- The user can use this expansion board with audio playback systems (eg: volumio, xbmc system etc.) to build its own network HIFI player;
- The expansion board provides two kinds of output interfaces to facilitate external amplifiers and other equipment.
- It provides LED indicates working status. Red LED for the DAC power indicator (Power normal light), the green LED for the DAC working condition (when working decode light, stop, or does not work when off), a better understanding of the work of the DAC provide infrared receiver interface (occupied GPIO26)
Specifications
- Sampling Frequency:384KHz
- Resolution (Bits) :16-32
- Digital Audio Interface :I2S
- SNR :120dB
- THD:-93dB
- Dynamic range :112dB
- Supports Raspberry Pi B+, Raspberry Pi 2 Model B
Manual
- https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-242/Volumio1.4_HiFiDAC_IR.7z
- https://s3-ap-northeast-1.amazonaws.com/sain-amzn/20/20-011-243/HIFI+BOARD.rar
Package Include
1 x HIFI DAC Audio Sound Card Module I2S interface for Raspberry pi B+,Raspberry Pi 2 Model B
Note: The raspberry pi B+ board is not included in this package.
- Sampling Frequency:384KHz
- Digital Audio Interface :I2S
- SNR:120dB; THD:-93dB; Dynamic range :112dB
- Resolution (Bits) :16-32
- Supports Raspberry Pi B+, Raspberry Pi 2 Model B
User questions & answers
| Question: | Does the support Asus Tinker Board |
| Answer: | YES |
| Question: | Does this support the Raspberry Pi |
| Answer: | Yes. I am currently using it with Rune audio as well. You will have to do some searching to find out exactly how to set it up, though. |
| Question: | Does this work with the raspberry Pi 3b |
| Answer: | Yes it does |
| Question: | How does this compare to the iqaudio pi-dac |
| Answer: | Short answer is they both use the same DAC IC (PCM5122.) Iqaudio has a few extra features but as far as sound goes they are the same. |
Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero W
Product description
The InnMmaker HiFi DAC Hat is the best optimized partner for RPI audio output. Used on-board PCM5122 as the IIS clock master, instead of the clocks from RPI which comes with too much jitter. Added dual low jitter oscillators(45.158M and 49.152M) to support more exact sample rate clocks. No soldering, no additional cables. Just plug it in and do some simple configuration, you will get a same high-class music player, but only pay 1/10 to 1/100 of the market price.
Features
Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality.
Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack.
With 138mw headphone Amplifier can directly drive headphone.
Work status indicators facilitate the understanding of the system working status.
HAT size.
DAC SNR is 112Db.
DAC THD+N @ -1 dBFS -78dB.
Full Scale Output of DAC is 2.1Vrms.
Dynamic Range of DAC is 112dB.
Sampling Frequency ranges from 8kHz to 384kHz.
Ultra-low noise voltage regulators for optimal audio performance.
Integrated EEPROM for automatic configuration(Option).
Automatically switching frequencies according to the input I2S signals.
Dual low jitter crystal oscillators for Master Clock generation.
Infrared remote control connector (using GPIO26).
DAC output coupled with Film capacitor.
- The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
- support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
- Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
- On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
- Comes with software, document and friendly technology support. For more information, please refer to our wiki（view the link on color page comes with the goods).
User questions & answers
| Question: | Will this hat allow me to stack a second hat to it? i'm specifically looking to stack the picade x hat onto this. is it possible |
| Answer: | There should be no problem as long as you don’t use any of the io pins, including all, the hifi hat is using. |
| Question: | Which gpio pins does this use |
| Answer: | See details in the hat user manual |
RASPIAUDIO Audio DAC HAT Sound Card (Audio+Speaker+MIC) for Raspberry Pi Zero/A+ / B+ / Pi 3 : Pi 4 Model B/Better Quality Than USB
Product description
Amazing if you need a loud amplification to connect external speakers ! The 2 built-in speaker sound supringly loud for their size, perfect for projects where you don't want any extra cable and have space constaints. We added a high sensitivity microphone. It can be used for all voice project such as Google voice assistant, Alexa and Open source alternatives. This is the loudest onboard speakers on the market with an impressive 5W stereo that could also be connected to external speakers (not included) thanks to the terminal screws.
- Onboard Microphone, can be detached for better performance (cable included)
- 2x5w Stereo Amplification 2 onboard speaker included
- Extention screw terminal for external speakers (2 to 8 ohm)
- DAC I2s 24-bit audio with studio sampling quality with Line out stereo 3.5mm jack
- NO soldering required ! Pre-Soldered Long female header 2x20
User questions & answers
| Question: | Is this stackable with Pi Sense Hat |
| Answer: | Never tried but should work as long as nothing is touching between the 2 boards |
| Question: | I purchased a mic+, and have it somewhat working, but the audio is pretty low. Is there any documentation (other than the website) available |
| Answer: | yes support and documentation is on the raspiaudio website, google it |
| Question: | On the unit i received the speakers are soldered on crookedly, preventing plugging pi400 ribbon cable into mic+ male pin header. how can i fix this |
| Answer: | Sorry if the unit was damaged during shippement, please feel free to ask for a replacement your amazon accout indication that the unit was damage during shipping. thanks |
| Question: | What are the power requirements for the mic+ version? i see that it uses the 5v and 3v3 connections, but no mention of the amperage required |
| Answer: | I'm not sure I ever saw an amperage rating from it, but it with a Pi Zero W for over two hours on a 2500 mAh battery. |
Argon x NanoSound ONE - Hi-Fi Raspberry Pi Audio Player | Built-in DAC (Digital to Analog Converter) | Rpi4 Not Included
- The Nanosound One is a Hi-Fi Audio Player that comes with its own Raspberry Pi DAC Hat while fully supporting Volumio and ROON
- HI-RES AUDIO AND WARM SOUND | The Texas Instruments PCM5122 chipset helps the Audio Player provide audio at 192kHz Sampling Rate and 24bit Resolution with 112-db SNR
- LOW JITTER | The I²S bus in this Raspberry Pi Audio Player offers low jitter for a smooth, comfortable listening experience.
- FULL CONTROL | Includes an Infrared Receiver and Remote Control to fully control your Raspberry Pi Player.
- COOLING AND PROTECTION | The Hi-Fi Audio Player also acts as a heatsink for the Raspberry pi for safety and cooling.
User questions & answers
| Question: | Does this work with the m.2 ssd bottom plate |
| Answer: | Yes, you can expand the storage of the Argon Nanosound using the Argon M.2 Expansion Board. |
Product features
Argon40 x NanoSound ONE - Raspberry Pi DAC Case | Digital to Analog Converter | Hi-Fi Player (Raspberry Pi4 Not Included)
NANOSOUND ONE Audio System Setup
HI-RES AUDIO AND WARM SOUND | Using the Texas Instruments PCM5122 chipset, Hi-Fi audio at 192kHz / 24bit Resolution with 112-db SNR
COOLING AND PROTECTION | Not only does this Raspberry Pi DAC case, but also acts as a heatsink for the Raspberry pi for safety and cooling.
HiLetgo PCM5102 I2S IIS Lossless Digital Audio DAC Decoder Module Stereo DAC Digital-to-Analog Converter Voice Module for Arduino Raspberry Pi
HiLetgo
Product description
Descriptions:
The DAC Module provides a super affordable high-quality DAC for the Raspberry Pi.
Since it's digital audio, it sounds really good, much better than the onboard analog audio.
The stereo jack comes soldered onto the board already.
Features:
Line out stereo jack.
pHAT format board
Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface
Specifications:
Type:I2S DAC Decoder
Model: PCM5102
Interface: 3PIN
Power supply: 5V
Board size: 30 × 24 × 1.6mm
Weight: 25.00g
Applications:
A / V Receiver
DVD, BD player
HDTV receiver
Applications Require 2VRMS audio output
Package Included:
1pcs HiLetgo PCM5102 Stereo DAC Digital-to-Analog Converter Module
- 1.The DAC Module provides a super affordable high-quality DAC for the Raspberry Pi.
- 2.Since it's digital audio, it sounds really good, much better than the onboard analog audio.
- 3.The stereo jack comes soldered onto the board already.
- 4.Uses the PCM5102A DAC to work with the Raspberry Pi I2S interface
- 5.Since it's digital audio, it sounds really good, much better than the onboard analog audio. The stereo jack comes soldered onto the board already.
anidees Aluminum Extra High Pi case for Raspberry Pi 4 Model B, HiFiBerry DAC+(RCA Version) – Black (AI-PI4-BB-HIFI)
Product description
Material Aluminum (1.5~4mm) , Smoky Acrylic (5mm) ,Rubber
Dimension (W / H / D) L*W*H=92.05 x 67.25 x 47.5mm / 3.62 x 2.65 x 1.87in
Net Weight 180g / 0.41lbs Gross Weight 280g / 0.62lbs
Mother Board Type Raspberry Pi 4 Model B, HiFiBerry DAC+(RCA version)
- Aluminum casing with cutouts for HiFiBerry DAC+ (RCA version) / GPIO / Camera / DSI display cable.
- Not just an Aluminum Case, it's the craft, Harmonious, refined and striking design with easy access to all inputs and outputs.
- More Possibility inside: 29.5mm space between PI4 and top cover. Aluminum has much better Heat dissipation compare with Plastic or ABS material.
- Air flow: 2mm cutout on both sides, extra 3mm spacer can be installed for more thermal efficiency.
- 5mm thickness top cover to show off the system, Noise-Absorbing Feet, 2 Wood screws for wall mounting
Vbestlife I2S Interface HiFi DIGI DAC & HiFi DIGI Digital Audio Sound Card Module for Raspberry PI 3 Model B / 2B / B
Product description
Description:
This item is clude Pifi DAC + PCM5122 DAC, I2S interface, analogue output signal, Compatible with for Raspberry Pi B + a + 2B Raspberry Pi 3B (64-bit).
Specification:
Condiiton: 100% Brand New
Sampling Frequency:384KHz
- Resolution (Bits) :16-32
- Digital Audio Interface :I2S
- SNR :120dB
- THD:-93dB
- Dynamic range :112dB
- Supports for Raspberry Pi B+, Raspberry Pi 2 Model B,Raspberry Pi 3B (64-bit)
Package Included:
1 x Digital Audio Card for Raspberry PI
1 x HIFI DAC for Raspberry PI
Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.Please understand that colors may exist chromatic aberration as the different placement of pictures.
- Upgrade DAC chip, using PCM5122 chip of high end, using I2S interface, and can via the i2c interface adjust audio volume parameter adjustment; supports 16 32 bit audio data format; Distortion and dynamic is very ideal, support the tall sampling rate of 3
- PCM5122 also integrated negative charge pump, the output without DC blocking capacitor; 2.1 Vrms ground center output; ability to suppress very good band noise. Due to the load support low to 1K, PCM510xA can drive a multitude of parallel products.
- Output ports with gold plated HS dual terminal and gold-plated 3.5mm Headset seat.
- The insulated power supply design, make the raspberry pie nutrition and DAC part of the independent power supply isolation, and by the bead completely without mutual interference, get rid of the current sound.
- Perfect compatibility raspberry pie official PI HAT size, gold plating process of tall based on circuit board, arc wire (high-end HIFI DAC adopts arc wire), better guarantee the impedance of the signal continuity, reduce the signal reflection and refract
RASPIAUDIO Audio DAC HAT Sound Card (Ultra+) for Raspberry Pi Zero/A+ / B+ / Pi 3 : Pi 4 / Better Quality Than USB
Product description
Mic ULTRA ++ Astouding if you want to record an audio source with a microphone or line IN. This is our newest model it takes the same onboard speakers of the MIC+ and add stereo onboard microphones, microphone input, line input. Mote that the onboard amplification is not as loud as the MIC+ (2x1.3W versur 2x5W for the MIC+) No cables or soldering required. Plug it and enjoy the included onboard speaker and onboard stereo microphones. Use it with external stereo microphone and line-in, output are heaphones or amplified speakers 1.3W.
- 2 Onboard microphones
- Stereo 3.5mm LINE jack input
- Stereo onbard speakers
- 24 Bit I2S Dac 2x1.3W Stereo Amplifier for external speakers
- Headphone output (24bits)
User questions & answers
| Question: | Does this have the input output jack for a mic/speaker device with a trrs plug |
| Answer: | no there is one jack for stereo microphone input, one jack for stereo headphout output. AND an additional jack for line input. |
Gaetooely PCM5122 for Raspberry Pi HiFi DAC HAT HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero W
Product description
Gaetooely is a brand that has already been registered. Only the authorized sellers are allowed to sell products under Gaetooely.Gaetooely will provide you with high-quality products and best after-sale service. Demo Board Type:for Raspberry pi 2 b
Model Number:for Raspberry Pi HiFi DAC HAT
Compatible: Raspberry Pi
Audio output interface: 2x R C A(LEFT &Right) & 3.5mm head phone Jack.
The headphones can be driven directly using a differential headphone driver (138mw).
The power indicator and the working status indicator are convenient for understanding the working status of the system.
Digital and analog power supplies are separately powered.
The size RPI HAT is fully compatible.
DAC SNR 112 dB.
DAC THD+N @ -1 dBFS -78dB. The DAC output amplitude is 2.1Vrms.
The DAC dynamic range is 112 dB.
Sample rate support range: 8khz ~ 384khz.
Reserve the ID EEPROM location.
The clock frequency is automatically switched according to the audio file sampling rate.
The clock unit uses two crystal oscillators with low jitter, high accuracy and low phase noise.
The DAC post-stage output is coupled using a film capacitor.
Reserve infrared remote position (using GPIO26, users can solder by themselves).
colour:green
Material:plastic
Package Contents:
1 x expansion board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
- On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to your music through Raspberry Pi to another terminals.
- Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film capacitor.
- The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin . Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
- support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) mode.
- Adopt 384KHZ/32bit DAC PCM5122.
HiFiBerry DAC+ Pro XLR - Raspberry Pi Shield
Product description
The HiFiBerry DAC+ Pro is the high-end version of our well-known HiFiBerry DAC+. It is a high-quality digital-to-analog converter for the Raspberry Pi (newer models with 40 pin GPIO connector) that is enhanced with features that not only further improve sound quality, but gives makers the chance to modify the board to their needs. The XLR version is specially designed for users who want to use the DAC+ Pro with professional studio equipment with symmetrical inputs. Please note: It is strongly recommended to mount this board into a solid metal case. Otherwise mechanical stress while plugging/unplugging XLR connectors might damage the XLR connectors. Dimensions without package 8,0 x 7,0 x 4,0 cm Usage recommendations music playback devices using studio cables home automation and multi-room audio systems interface to external high-end I2S DACs to the Raspberry Pi
- Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality
- Professional XLR connectors. Connects directly to the Raspberry Pi, no additional cables needed
- Hardware volume control. You can control the output volume using “alsamixer” or any application that supports ALSA mixer controls.
- Compatible with Raspberry Pi model A+,B+, 2B and 3B. The board does not fit standard HiFiBerry cases, however, It is strongly recommended to mount this board into a solid metal case. Otherwise mechanical stress while plugging/unplugging XLR connectors might damage the XLR connectors.
- Directly powered from the Raspberry Pi, no additional power supply. Comes with all components required to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi. No soldering – Comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi, it is conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
User questions & answers
| Question: | will this operate on a Pi |
| Answer: | So far, so good :) |
| Question: | Will this work on a rp 3b+ running libreelec |
| Answer: | Yes, works the same built in driver as the Hifiberry Dac with RCA output. |
| Question: | Would this be recommended for using with active speakers? I'm thinking of just routing straight in my prosonus speakers |
| Answer: | If your speakers are self powered, and they have an XLR input, I don't see why not. |
| Question: | Is the xlr output balanced |
| Answer: | from the web site but in short YES HIFIBERRY DAC+ PRO XLR COMPATIBLE WITH: RASPBERRY PI A+/B+/2B/3B/3B+/4B+/ZERO This is our HiFiBerry DAC+ Pro with a pair of XLR jacks. The output is fully balanced. |
Latest Reviews
View all
Farberware Fathers
- Updated: 14.02.2023
- Read reviews
Reebok Lightweight Running Shoes
- Updated: 26.01.2023
- Read reviews
Pants For Tall Boys
- Updated: 03.02.2023
- Read reviews
Slim Trash Can For Office
- Updated: 27.06.2023
- Read reviews
Vpn Services Canada
- Updated: 07.06.2023
- Read reviews