10 best cpu temperature

Product description

Designed to fit a front panel 5.25" bay in your rig, it features fan speed knobs for controlling 4 individual channels. With a large LCD display, it shows the fan speed and temperature. With alarm function, it is convenient to monitor the fan in normal operation in order to avoid the damage to the equipment. Take control of your fans with this 4 channel fan controller.



Specifications:

Brand: Sunshine-tipway

Model: STW-6041

Compatibility: 5.25" drive bay

Output voltage: DC 12V

Voltage range: 5-12V

Fan channel quantity: 4 channels

Fan connector: compatible with 3-pin 4-pin connector

Power connector: 4-pin male and 4-pin female connector

Max output current: 2.8A

Screen: LCD 

power: 36W

Item weight: 200g / 7.05oz

Item size: 14.7 * 7.8 * 4cm / 5.78 * 3.07 * 1.57in (L * W * H)

Package weight: 306g / 10.79oz

Package size: 19.5 * 17 * 6.5cm / 7.67 * 6.69 * 2.56in (L * W * H)



Package List:

1 * Fan controller

1 * User manual (English, Chinese)

4 * Screws

• 4 channels stepless fan speed control, specially designed for PC enthusiasts.
• Equip with 4 sets of temperature probe, test detection range 0-99 degrees.
• Reduce noise and maintain proper heat levels to keep all the parts of your computer running with high performance.
• Large LCD screen shows the actual speed of each group of fan and the temperature.
• When the temperature is over 70℃， it will send an alert to promptly adjust the fan speed; When the fans stop or in exception condition, it will check the working status of the fan.

Product description

The MPG CORELIQUID K360 is a liquid cooler made to perform and look stunning at the same time. MSI's exclusive TORX FAN 4.0 generates supreme airflow to the radiator for rapid cooling. Additionally, a 60mm TORX FAN 3.0 is placed within the water blockhead, providing concentrated cooling to power solutions. The MPG CORELIQUID K360's water blockhead also has a 2.4" LCD, capable of displaying crucial information and customizable graphics such as hardware system performance information, photos and a system clock.

• TIMELESS RELIABILITY - The motor ceramic bearing has been designed to stand up to 100,000 hours of life expectancy.
• TOTAL RGB FAN CONTROL The included RGB fans support custom speed with PWM fan and customizable lighting through software.
• OLED CAP - 60mm fan on pump with OLED screen

Product features

2.4” CUSTOMIZABLE LCD DISPLAY

The MPG CORELIQUID K Series comes equipped with a 2.4" LCD capable of displaying a wide range of hardware system information and customizable graphics.

CONTROL IN YOUR HANDS

Everything ranging from MPG CORELIQUID K Series' fan speed to the ARGB lighting to the LCD display can be adjusted through the MSI Center.

CONCENTRATED COOLING PERFORMANCE

A 60mm TORX FAN 3.0 is placed within the water block to help dissipate heat for the power solutions.

EVAPORATION PROOF TUBING

MPG CORELIQUID K Series’ tubing is constructed with three layers of netted plastic with a reinforced mesh exterior.

THE MOST COMPLETE USER EXPERIENCE

The G.I. (Gaming Intelligence) Mode intelligently detects the temperature of the system. The radiator fans, water block fan, and pump can all have their speed adjusted according to different usage situations.

TORX FAN 4.0

Inspired by teamwork, MSI’s exclusive TORX FAN 4.0 has two fan blades working as one with an outer ring design.

Product description

This is a high quality, one component, high-temperature silione adhesive so called "liquid gasket". The product cures under the influence of moisture contained in air. It is impossible to use it in rooms completely closed.IDEAL FOR:Motorization: sealing elements of electic and combustion engines (oil bowls,head blocks, drive bridges, gear boxes etc). Replaces gaskets made of paper, cardboard, rubber, teflon.Building technical devices: sealing joints where high resistance to hightemperature is required, sealing pumps, filters, heating devices (boilers, stoves; heaters, cookers).HOW TO USE:Dry and clean the surfaces designed for bonding from dust, grease and dirt Remove old loose seal. Stick masking tape on both sides of the surface tobe bonded to ensure equal edges. Apply small amount of the silicone Remove an excees of the adhesive usinng an oiled spatula. Remove the masking tape after 8 min. Remove the cured silicone with a knife or razor blade.

• HIGH QUALITY BLACK SEALANT 300ºC HEAT RESISTANT HERMETIC
• Creates 100% rubber which leaves flexible at temperatures - 60ºC up to up to + 300ºC
• Perfectly bonds to all smooth metal surfaces, alloys and casts glass, ceramics, plastic, wood,
• mineral products, marble, stone,concrete etc. Replaces different kind of gaskets resistant to
• UV radiation, changing weather conditions, oils, cooling liquids, petrol, and water.

User questions & answers

Question:	I need to make a seal around some ptfe wires. will this bond to ptfe? can it withstand gas pressure
Answer:	Not sure of all but fits my GE model number GDSCOKCXERWW.
Question:	Do you use a gasoline tank
Answer:	I looked up your drawer and the part number your looking for should be this: WR32X10463 vegetable drawer/crisper.
Question:	Could this be used in bonding wood together that may be exposed to high temperatures
Answer:	Hi, I believe the correct mother board for this unit is WR55X10942p. You can put your model number in Google and go to the many repair part web site I.E. https://www.appliancepartspros.com/ge-board-with-core-wr55x10942p-ap6048447.html. I would suggest that you try several sites to verify the correct part number. Also,check several of them for the best deals and some will pay YOU if you send back the old board. Also, some sites will show videos and give hints. If you need additional help I will be glad to help.

• Vibrant and Dazzling RGB LED Pump Head: The AQUA Series’ Water Block packs together all the reliability and performance you expect from a high-end CPU cooler with a vibrant and dazzling RGB LED pump head to lights up your remarkable gaming builds.
• More than 100 RGB Effects with Driver-Free Remote Controller
• Motherboard Synchronization: Aqua is also compatible motherboards’ 5V connection with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync for helping you to fulfill system-wide lighting synchronization.
• Performance First: Incredible Fans: The included Vortex Omega fans with turbine blade and patented frame design are the best guarantee of excellent airflow, air pressure and extremely silent performance.
• CPU Socket: Intel Socket LGA 775 / 1155 / 1156 / 1151 / 1366 2011(Core i3 / i5 / i7 CPU) / 2066 AMD AM4/FM2 / FM1 / AM3+ / AM3 / AM2+AM2 CPU

User questions & answers

Question:	is the 360 mm option have three fans
Answer:	The sata power is supplied from the PSU. If my memory is correct it has a "T" so that you can power it and another device with the sata at the same time.
Question:	How to get the light to work? I hooked the wire to the motherboard location to 5v and still doesnt work
Answer:	Yes.
Question:	The only problem i found was the sata power plug doesn't allow me to plug it into the motherboard. is there a way to with a sata to pwn adapter
Answer:	It’s prefilled , set it and forget it .

Product features

Vibrant and Dazzling RGB LED Pump Head

The AQUA Series’ Water Block packs together all the reliability and performance you expect from a high-end CPU cooler with a vibrant and dazzling RGB LED pump head to lights up your remarkable gaming builds.

More than 100 RGB Effects with Driver-Free Remote Controller

Motherboard Synchronization

Aqua is also compatible motherboards’ 5V connection with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome Sync for helping you to fulfill system-wide lighting synchronization.

Performance First: Incredible Fans

Specifications

Bearing Type: Hydro-Dynamic Bearing

Cable Length Fan power: 600 mm

Connector & Control: 4 Pin PWM

Product description

High quality material made by EK Water Blocks. The product will meet the expectations of the players but also the enthusiasts of computer researchers First of all a quality product with the Ventirad EK Water Blocks ek-velocity d-rgb - Nickel + Acetal

• EKWB high-performance flagship CPU waterblock for modern Intel CPUs featuring digital RGB
• Top: CNC Machined POM Acetal
• Base: Mirror Finish Nickel-plated Copper
• G1/4" Threads
• Intel Socket Compatibility: Intel LGA-1150/1151/1155/1156, LGA 1200, LGA-2011(-3), LGA-2066

User questions & answers

Question:	What is the manufacturer warranty period on these
Answer:	It fits the crisper bins for the GE model I have. You will find that it is a standard size bin designed to fit many brands of refrigerators all actually are made by the same manufacturer. hope this help's, you will not find a better price, this was for a rental.

Product description

Thermaltake water 3. 0 360 ARGB sync Edition comes with three 120 mm fan with a large surface radiator, high Performance water block and pump for ultimate CPU cooling. The built-in pure ARGB fan features compression blades, hydraulic bearing, and 16. 8 million colors LEDs that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. Users can easily switch RGB lighting effects using the ARGB Controller that is included in the packet, or by ASUS aura Sync, gigabyte RGB FUSION, MSI Mystic Light Sync and as rock polychrome software. Water 3. 0 a RGB sync Edition series allows users to enjoy better cooling performance and greater CPU protection!

P/N: CL-W234-PL12SW-A

WEIGHT: 2250 g

PUMP: Motor Speed: 3600 RPM

Rated Voltage: 12 V & 5V

Power Input: 12V – 3.9 W , 5V – 1.06 W

WATER BLOCK: Material: Copper

FAN:

Dimension: 120 x 120 x 25 mm

Speed: PWM 500~1500 R.P.M (2510-4PIN)

Noise Level: 25.8 dB-A

Power Input: 12V- 1.44 W, 5V – 1.6W (one fan)

Rated Voltage: 12 V & 5V

Max. Air Flow: 56.45 CFM

Max. Pressure: 1.59 mm-H2O

LED Control: ARGB controller or 5V addressable RGB header on motherboard

TUBE:

Length: 400 mm

Material: Rubber

RADIATOR:

Dimension: 394 x 120 x 27 mm

COMPATIBILITY:

Intel:

LGA 2066/20113/2011/1366/1200/1156/1155/1151/1150

AMD:

TR4/AM4/FM2/FM1/AM3+/AM3/AM2+/AM2

*AIO Cooler bracket adapter comes in the AMD Threadripper CPU box.

• DIGITAL/ANALOG : Customize pump and fan lighting with Asus Aura, Gigabyte RGB Fusion, MSI Mystic Light Sync, AsRock Polychrome or through the included ARGB Controller offering 7 Light Modes and 8 Full Light preset colors
• READY TO SYNC : Equipped with an ARGB LED Ring on the pump and ARGB radiator fans, lighting effects can be synchronized with select ASUS, GIGABYTE, MSI, and AsRock 5V RGB header motherboards and controlled via motherboard RGB software
• FIND YOUR COLOR : Select from 16.8 million colors, bringing the right atmosphere to any system theme
• HIGH EFFICIENCY RADIATOR : Large surface radiator increases cooling and provides exceptional heat dissipation
• PERFORMANCE WATER BLOCK : Copper base plate accelerates the heat conductivity for water block and pump
• NO REFILL REQUIRED : Reinforced sleeved low evaporation tubing delivers the best durability and effectively decreases the loss of coolant
• TUBE LENGTH : (360)400 mm, (240)326 mm, (120)326 mm

User questions & answers

Question:	What is ideal placement of radiator in a push/pull configuration? case: enthoo evolv atx by phanteks
Answer:	youre paying a premium for rgb. it has one of the best pump RGB effects out there. and if you get the white version the fans have inner and outer leds
Question:	What do you guys recommend for a pump and reservoir for this system
Answer:	We do not release the O/D nor I/D for the hoses, this system is not meant to be opened to add to a custom loop.
Question:	would this work with an i core
Answer:	You Can you try routing the cable through the slot near the heat spreader at the top for the cord. Outside of that that's the only option. I also had to do this on my motherboard for the cord to make it look alright. It doesn't hurt the cord in any way.
Question:	Does this come with thermal paste
Answer:	Yes! Corsair uses Shinetsu paste on their coolers. Its really good tbh.

Product features

Hassle-free Installation

Thermaltake Water 3.0 ARGB Sync Edition Series is compatible with major INTEL/AMD sockets and is designed with a tool-free pump installation system.

Product description

A copper base CPU water block with 0.15mm internal fin construction, anti-corrosive nickel plating and a built-in temperature sensor for monitoring temperature and high standard cooling performance. Supported by TT RGB Plus Software delivering 16.8 million colors of illumination.



P/N: CL-W279-CU00SW-A

DIMENSIONS: 93.4 L x 93.4 W x 22 H mm

WEIGHT: 670 g

POWER INPUT: 2.4 W

COMPATIBILITY

Intel：LGA 2066/20113/2011/1366/1200/1156/1155/1151/1150/775

AMD：AM4/FM2/FM1AM3+/AM3/AM2+/AM2

CONNECTOR: 4-Pin Molex

RATED VOLTAGE: 5 V

THREADS: G ¼”

• Transparent Water Block: Showcase your coolant through a unique upper cover and captivate with 12 customizable RGB LEDs.
• Built-in Temperature Sensor: Monitor real time water temperature and customize LED lighting all within TT RGB Plus Software.
• Premium Copper Base: Specially machined and nickel plated for exceptional heat transfer and anti-corrosion protection.
• RGB PLUS Ecosystem: The Digital Controller offers four additional ports allowing you to plug in and sync other TT RGB PLUS products.
• Universal Compatibility: Intel LGA 1200, 2066, 2011v3, 2011,115X, 1366, 775 | AMD AM4, AM3+, AM3, AM2+, AM2, FM2, FM1

User questions & answers

Question:	What connecter does it use
Answer:	Normal 1/4G anything of your likings for the most part. I have a few f 1/4 G Fittings and they all work just fine. I use these: http://www.amazon.com/Enzotech-Compression-Fitting-Black-4-pack/dp/B00VUB62L4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_search_detailpage
Question:	Is this version of the d5 pump pwm compatible and can it be connected to the motherboard for speed control
Answer:	No, you can't do this. This pump has manual speed control.
Question:	Can the get removed
Answer:	No, the get is permanent.
Question:	whats the difference between type A,B,C,D
Answer:	Thanks for your inquiry. Here's the difference between all the pump/reservoir combo. 1. Type A (CL-W187-PL00SW-A): our latest model with LED on cap. It is one of our PLUS family, which means the lighting effect can be controlled by either our Riing Plus software or dedicated motherboards by connecting with our TT Sync Controller (CL-O014-PL00SW-A). It also can sync with all other PLUS products, like Riing Plus fan, Floe AIO cooler, W4 Plus water Block, and Lumi Plus LED strip. 2. Type B (CL-W083-PL00BL-A): the same pump/reservoir combo as Type A but with non-LED silent kit cap which reduce noise by 10%. 3. Type C (CL-W082-PL00BL-A): the same pump/reservoir combo as the top 2 models with regular cap. 4. Type D (CL-W080-PL00BL-A): the same as Type C but with smaller capacity (200ml)

Product description

The MasterAir Maker 8 has landed. It's designed for gamers and over clockers who demand ultra low temperatures, aggressive LED lighting, and total control over their hardware. A seriously size able unit bursting at the seams with our newly patented 3D Vapor Chamber technology, your system will look amazing and stay rock solid even during intense gaming and overclocking. And yes, you can customize the outlook with two bundled top cover designs, as well as adjust the fan size, model or position for memory or graphics card clearance.

• 3D Vapor Chamber offers the latest breakthrough in cooling technology; For superior cooling solution that better protects your advanced components; Air flow: 66 CFM; Noise level: 24.0 decibels
• A total of 8 heat pipes (4 seamlessly merged with the base) offers 250W TDP, while an ultra large heatsink helps further cool
• High quality silence FP fans with Cooler Master exclusive silent driver IC technology; Making it 1 of the quietest CHOICES in high pressure cooling
• Customize with interchangeable top covers, opting for a translucent plate showcasing the LED lights, or an aluminum plate for a clean and stylish finish
• Want to 3D print A creative design or image on the top cover, Go for it; 3D print to your heart's content and make the masterair Maker 8 truly yours
• Supports both 140mm and 120mm fans; Fans can quickly and easily be adjusted, removed and replaced thanks to a special fan bracket design

User questions & answers

Question:	Does this support motherboards socket of lga1151 or better yet a msi z370 gaming pro carbon
Answer:	No this one will not fit your model gss25sgre ss
Question:	Is there a way to control the addressable rgb leds in the ma410m through software, either aura or coolermaster’s
Answer:	No, WR32X10156 does not fit GZS22DSJKFSS.
Question:	Would this fit with 4x4 hyper x ddr4 ram
Answer:	No, only the refrigerator. The freezer shelf (at least in my refrigerator model) is much smaller than the refrigerator shelf.
Question:	Can it run crysis
Answer:	Hello! Unfortunately DA97-08693B and WR32X10340 do not cross reference to one another as they are different manufacturers. I do apologize for the inconvenience.

Product features

MasterAir Maker 8

Bursting at the seams with our newly patented 3D Vapor Chamber technology, your system will look amazing and stay rock solid during intense gaming and overclocking. You can customize the look of the MasterAir Maker 8 with two bundled top cover designs, as well as adjust the fan size, model or position for memory or graphics card clearance.

Product description

The Master Air MA620P TUF edition is built for extreme cooling performance in collaboration with ASUS TUF series motherboards. Based on the legendary Hyper 212 heatsink but with the dual tower design, the heat dissipation power and performance double. With six heat pipes and Continuous Direct Contact Technology 2. 0 (CDC 2. 0), this is an engineering masterpiece.  Two Master Fan MF120R RGB make it silent and effective in heat transfer. It is perfect for multi graphic platforms and overclocking. If you are looking for an exceptional air cooler that delivers great performance, silence, and fun RGB lighting.

• Dual-tower design - based on the highly regarded Hyper 212 heatsink design with double the heat dissipation power. Air flow - 53.4 CFM. Noise level - 31.0 decibels
• Exceptional performance - 6 heat pipes and continuous Direct Contact Technology 2. 0 (CDC 2. 0), the Contact surface area base is increased by 45% to improves cooling capability
• Custom Colors - With two Master Fan MF120R RGB fans, the Master Air MA620P is ready for more than 16. 7 million color options and tons of fun effects
• Wired RGB Controller C10L – Even without an RGB capable motherboard, the included controller allows customizable colors, brightness and effects for the fans without the need for software
• Silent cooling – make no compromise between silence and performance with exclusive noise reduction design and technology

User questions & answers

Question:	cable length
Answer:	try a shelf protector. Mine are cloth or a thin plastic cutting board might work.
Question:	Cannot find a compatibility list...will a ma620p tuf edition work on a z97 a? the ram is sort of close to socket. thanks
Answer:	I don't think this is the correct part for your model. If you Google your model number, you will find a GE parts listing that has diagrams with part numbers. According to the refrigerator door diagram, I believe you need #127 - which is Part No. PS2323438. Good luck!
Question:	whats the hight of this cooler
Answer:	According to amazon he product number you have listed is incorrect. If you type in the serial number and product number they will direct to it, if they carry it. You can always go to the GE website and type in your make and model, they will show you a owners manual, with a picture of your refrigerator and you can click on the exact part you need and enter that number on amazon. Then you'll know, it will work.
Question:	Does this have a 4 pin or 3 pin RGB connector
Answer:	This part is 16.75 x 13. Cierra, AppliancePartsPros Team

Product features

MasterAir MA620P TUF Gaming Edition

The MA620P, a dual-tower, dual-fan cooler with Cooler Master’s CDC 2.0 technology, is engineered to maximized heat transfer from any CPU. Customize the lighting through the Asus Aura Sync software or with the remote included.

TUF Gaming Alliance

TUF Gaming Alliance is the marque of collaboration between Asus and major PC-component manufacturers. A growing range of compliant parts assures both compatibility and aesthetic harmony.

Dual-Tower Design

Based on the design of the Hyper 212, the MA620P packs double the heat dissipation power.

Continuous Direct Contact 2.0

45% more surface area contact, made possible by the compressed heat pipe design of CDC 2.0.

Wired C10L RGB Controller Included

Choose between 5 brightness levels, 6 lighting modes, and 7 colors – no software required.

Product description

Includes LCD display and temperature sensor wire

Model: 5060175589927

• Display Temperatures up to 70c
• Display Temperatures down to -40c
• Sensor can be mounted up to 500mm away from LCD
• SATA Power (5V)
• Display Dimensions: 50mm x 30mm x 15mm

User questions & answers

Question:	will this do both C and f
Answer:	No this only shows Celsius