11 best uxcell desktop computer cases
UXcell desktop computer cases are products designed to house and protect the internal components of a desktop computer. These cases are essential for building a custom PC, upgrading an existing one, or replacing a worn-out or damaged case. Here are some key points about UXcell desktop computer cases:
Form Factors: UXcell offers computer cases in various form factors, including ATX, micro ATX, and mini-ITX. The choice of form factor depends on the size of the motherboard and other components you plan to install.
Materials: These cases are typically constructed from materials like steel and plastic. The choice of material can impact the case's durability, weight, and appearance.
Cooling: Many UXcell computer cases come with built-in cooling solutions, such as fans and airflow designs. Proper cooling is crucial to maintaining optimal operating temperatures for the computer's components.
Drive Bays: These cases include drive bays for installing hard drives, solid-state drives, optical drives, and other storage devices. The number and type of drive bays may vary between different models.
Expansion Slots: Expansion slots are provided to accommodate graphics cards, sound cards, and other expansion cards. Ensure the case has enough slots for your intended setup.
Front Panel Ports: UXcell cases typically have front panel ports, including USB ports, audio jacks, and sometimes even USB Type-C ports for convenient connectivity.
Cable Management: Effective cable management features, such as routing holes and tie-down points, can help keep the interior of the case tidy and improve airflow.
Aesthetics: UXcell offers a range of case designs, from minimalistic to gamer-oriented styles.Choose a case that matches your aesthetic preferences.
Build Quality: The build quality of UXcell computer cases can vary. It's a good idea to read reviews and consider the case's construction quality when making a purchase.
Compatibility: Ensure that the case is compatible with your chosen motherboard size and other components, such as the power supply unit (PSU) and graphics card length.
Tool-Free Installation: Some cases feature tool-free design elements, making it easier to install and replace components without the need for additional tools.
Dust Filters: Dust filters can help keep the interior of your computer clean and protect components from dust and debris.
When selecting a UXcell desktop computer case, consider your specific needs, the size of your components, and any future upgrade plans. Additionally, read product reviews and check compatibility to ensure the case is suitable for your intended PC build.
Below you can find our editor's choice of the best uxcell desktop computer cases on the marketProduct description
Metal Fan Grill finger Guard Protector 200mm for PC Computer, or other mateched air vent fan.
- Product Name : Fan Metal Finger Guard;Material : Metal
- Fit for Fan Size : 180mm/ 7";Mount Hole Distance : 160x 160mm / 6.3" x 6.3"
- Total Size : 170 x 170mm / 6.7" x 6.7"(L*W);Color : Silver Tone
- Net Weight : 85g
- Package Conetnt : 1x Fan Metal Finger Guard
Product description
Features:Flat head surface,no step,straight knurled.
These quality crafted thumb screws provide quick installation for securing cases and can easily be tightened by hand without much force.
- Product Name: Computer Case Thumb Screws; Material: Stainless Steel,Ni-Coated
- Weight: 146g; Package Content: 50(+/-2%)pcs x Computer Case Thumb Screws
- Overall Size: 12 x 8.5mm/0.47" x 0.33"(L*Max.D); Main Color: Silver Tone
- Thread Size: 3 x 6mm/1.2" x 2.4"(D*L); Phillips Size: 4mm/0.16"
- Pitch: 0.5mm; Head Size: 8.5x 6mm/0.33" x 0.23"(D*T)
Product description
Desktop PC motherboard ATX power reset switch cable, momentary switch button, fits most desktop computer host cases with front panel button.
- Product Name: PC ATX Power Reset Switch Cable; Material: Plastic
- Size: 8 x 8 x 14mm/0.3" x 0.3" x 0.55"(L*W*H)
- Color: White, Purple
- Net Weight: 18g
- Package Content: 5 x PC ATX Power Reset Switch Cable
Product description
1. M3.5x6mm computer case thumb screws, 15mm total length.
2. The screws can either be taken off and put on by hand or use the appropriate screwdriver.
3. These quality crafted thumb screws provide quick installation for securing cases and can easily be tightened by hand without much force.
4. These thumb screws are a suitable replacement for the outer case screws.
5. Easy installation and convenient use.
Specification:
Product Name: Computer Case Thumb Screws
Main Color: Silver Tone
Material: Metal
Weight: 92g
Overall Size: 15 x 9mm / 0.6-inch x 0.36-inchL*Max.D)
Thread Size: 3.5 x 6mm / 1.4-inch x 2.4-inch(D*L)
Phillips Size: 4mm / 0.16-inch
Package Content: 30pcs x Computer Case Thumb Screws
- M3.5x6mm computer case thumb screws, 15mm total length.
- The screws can either be taken off and put on by hand or use the appropriate screwdriver.
- These quality crafted thumb screws provide quick installation for securing cases and can easily be tightened by hand without much force.
- These thumb screws are a suitable replacement for the outer case screws.
- Easy installation and convenient use.
Product description
These quality crafted thumb screws provide quick installation for securing cases and can easily be tightened by hand without much force.
- Product Name: Computer Case Thumb Screws; Material: Stainless Steel, Nickel Coated; Weight: 150g
- Package Content: 50(+/-2%)pcs x Computer Case Thumb Screws; Overall Size: 15 x 9mm/0.6" x 0.35"(L*Max.D)
- Main Color: Silver Tone; Thread Size: 3.5 x 6mm/1.4" x 2.4"(D*L)
- Phillips Size: 4mm/0.16"; Pitch: 0.8mm
- Head Size: 9 x 6mm/0.35" x 0.24"(D*T); Step Size: 6 x 3mm/0.24" x 0.12"(D*T)
Product description
Desktop PC motherboard atx power reset switch, momentary switch button, fits most desktop computer host cases with front panel button..
- Product Name : Desktop Power Button Switch;Design : H.D.D LED, Power LED+, Power LED-, Reset SW, Switch SW
- Cable Length : 1.7m / 67"
- Material (External) : Plastic, Metal
- Weight : 110g
- Package Content : 1 Setx Desktop Power Button Switch
User questions & answers
Question: | Will it work for dell optiplex 7010 desktop? if so, how? cannot locate accurate pinouts |
Answer: | It connects in on the motherboard. To install it you first remove the case wires for the start button, reset button, and hard drive activities light. This is usually found in the lower right corner of your motherboard. Just follow the pin locations found in your motherboard manual. If you do not have a motherboard manual don't worry just unplug a case wire and put a wire from the Uxcell with the same markings into the same place you just took the other from. You may run into the case wire has wires for positive and negative that are separate and the Uxcell has two wires in one plug. They will be marked + and -. Just make sure you get this right or your computer will not start. Do this with all of them one at a time and you will be ok. It should take less than 5 minutes. |
Question: | Does the cable disconnect where it is connected to the expansion slot? Like to make it easier to move the computer |
Answer: | This should work with any motherboard. If it doesn't work with a specific motherboard, then you're likely to have many other compatibility problems with that board. |
Question: | Greetings i would like to know if this product works with all motherboards or i should i check points or compatibility? thanks i hope your help |
Answer: | yes, if you plug a splinter between this and the pc power button cables |
Question: | Can you have this and the pc case power button working together |
Answer: | No that is a Gromit for one PCI slot cover. I was able to pass 2 wires into the slot replacement unit. |
Question: | Will this wire disconnect in the middle? It looks like it does but I don’t know |
Answer: | around 2 3/4" |
Question: | What is the diameter of the button shell |
Answer: | Mine does not have audio/mic connections. Just power button, power LED and reset. |
Question: | Does it support audio/mic |
Answer: | Yes this s/w replaces a switch that would usually be located on the front panel of your desktop. It has a power s/w and a reset s/w below the power s/w. |
Question: | Will this button hard reset your system? hold down button cpu turns off |
Answer: | Probably not. Even if it did fit airflow will be an issue since half the cooler will be blocked by the PSU. I have a Dark Rock 4 in mine and that's the biggest cooler I'd recommend for it |
Product description
Specifications:
Description:
Fan Grills /Guards are ideal for improving the appearance and safety of your blowhole modifications or other system fans.
They are also a perfect replacement for stock case grills as they are very restrictive and these grills will let air flow freely.
- Product Name : Case Fan Finger Guard;Material : Metal
- Fit for Fan Size : 40 x 40mm/1.6" x 1.6"(L*W);Total Size : 40 x 40mm/1.6" x 1.6"(L*W)
- Hole Distance : 32 x 32mm/1.25" x 1.25"(L*W);Metal Finger Guard Diameter : 30mm/1.2"
- Color : Silver Tone;Weight : 9g
- Package Conetnt : 2 x Fan Metal Finger Guard
Product description
Protects fan and wiring from damage.Requires 4 mounting screws (not included).Ideal protection against electronic parts injuries caused by fan blades' rotating.Please check the size of you PC fan before ordering.
- Product Name : Fan Guard;Fit for : 120mm Fan
- Material : Metal;Color : Silver Tone
- Size (Approx.) : 120 x 120mm / 4.7'' x 4.7" (L*W)
- Net Weight : 60g
- Package Content : 2 x Fan Guard
Product description
For use with 60mm computer case fans.
Provides added safety.
Protects fan blades and wiring from damage.
Requires 4 mounting screws (not included).
Ideal protection against electronic parts injuries caused by fan blades rotating.
Please check the size of you PC fan before ordering.
- Product Name : CPU Fan Grill Guard;Fit for : 50mm Fan
- Material : Metal;Color : Silver Tone
- Size (Approx.) : 60 x 60mm / 2.36'' x 2.36"(L*W)
- Net Weight : 20g
- Package Content : 2 x CPU Fan Grill Guard
Product description
Durable plastic construction, black color, easy to clean, convenient to install.
Holes design allows more airflow to pass through.
A wonderful accessory for your PC case fan.
- [Material] - The computer finger guard is made of pvc
- [Size] - Fit for fan size: 90mm x 90mm; Overall Size: 84mm x 84mm(L*W); Mounting Hole Size: 70mm x 70mm(L*W)
- [Dustproof ] - Hollow mesh filter design can prevent wires from entering the fan without dust entering
- [Applications] - This cooling fan grill can be used in computers, power supplies, 3D printers, projectors and other equipment to ventilate heat, and avoid fingers and cables from being twisted into the fan
- [Stable and Durable] - 4 screw mounting holes, easy to install (Not included screws)
User questions & answers
Question: | Can the filter be removed and cleaned without removing the fans? Thanks |
Answer: | Yes. There are built in vent holes in the case. |
Question: | does it restrict airflow to the case |
Answer: | It will fit any dell 13” |
Question: | What replacement filter pads do I use with these covers / fans |
Answer: | The case fits good on this laptop... I am very satisfied with it. I purchased both April 2019. |
Question: | How do you mount these |
Answer: | Absolutely NOT, we do not make a case for your model laptop |
Latest Reviews
View all
Half Round Bolster Pillow
- Updated: 05.01.2023
- Read reviews

New Recipe Cookbooks
- Updated: 13.02.2023
- Read reviews

Tree Stretchers
- Updated: 28.06.2023
- Read reviews

Casio Altimeter Watches
- Updated: 23.06.2023
- Read reviews

Portable Vacuum For Pets
- Updated: 23.02.2023
- Read reviews