13 best car subwoofers

Product description

800 Watt Max Dual 12" Terminator Series Loaded Subwoofer Bass Enclosure

• 5/8" MDF Construction
• Frequency response: 10Hz - 150Hz. Aviation Grade Carpet
• Embroidered Terminator Logo; Impedance: 2Ω
• Combines the sleek looks and power of a Terminator mono block amplifier with either a sealed enclosure
• Houses two 12-Inch Terminator subwoofers, TNP212D2, or a vented enclosure
• Frequency response: 10Hz - 150Hz. Ideal solutions for anyone looking to add bass to their vehicle
• Ruggedly constructed using 5/8" MDF and aviation grade black carpet

User questions & answers

Question:	Could I pus these on a monoblock amp? Or would I have to bridge them myself
Answer:	Yes they can be put on mono block, that's what I have set up. Just don't bridge it, it's only 2ohm stable not 1.
Question:	Does anyone have the BOSS 1100 watt riot amp with these? If so how do you like? Does it hit hard
Answer:	I've used it temporarily on the sealed enclosure version of these. BOSS amps are cheap for a reason though. Poor sound quality and it doesn't push anywhere near the 1000 watts these can handle. If you want a cheap amp that actually sounds good I'd recommend the Power Acoustik rzr1-2500d it's not 1000 watts RMS but it'll do 700+ on good electrical & sounds Way better than the boss amp
Question:	anybody had these subs for awhile do they last
Answer:	I have had these subs in the box 4 going on 6 years with a 3000 watt competition massive amp pushing 800 watts RMS bridged making it 200% overpowered I paid $122 for them six years ago and they are still thumping to this day
Question:	Is this just the enclosure or is it the two 12" subwoofers and the enclosure in one deal
Answer:	Everything you see, you get...no speaker wires though...

Product features

MTX TNE212D Dual 12-Inch Sealed Enclosure 2 Ohm

TNE212D Highlights

Product description

If you're looking to beat out your friends, then the MTX 12 inch subwoofer kit is for you. This MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp. With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality. All you need to complete this subwoofer package is an amp wiring kit. Install your car audio right at home with all the right pieces at your fingertips with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA. The 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal. Get more performance with your car audio and get it done yourself with the Soundstorm 8 Gauge Complete Amplifier Wiring Kit with RCA.

• ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
• HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
• MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
• AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
• SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches

User questions & answers

Question:	Will this fit a 2011 dodge avanger
Answer:	Yes
Question:	Will this work in my 2006 chevy equinox
Answer:	Yes if you have aftermarket radio or the adapter to hook the amp up to factory radio
Question:	What are the dimensions of the subwoofer box
Answer:	The dimensions given in the description are for the amp. When I contacted the seller the informed me to contact the manufacturer, who has gotten back to me yet. So if anyone has the actual dimensions for the speaker enclosure that would be very helpful.
Question:	So does this come with the wire or not
Answer:	Just got it today. Mine didn't come with the wiring. Very disappointed

• Features of RG212CA v2: Rockville RG212CA v2 Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket
• High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs
• Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level
• 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote

User questions & answers

Question:	Dose this come with everything
Answer:	No it doesn't you need to get power wire. Ground wire. REMOTE wire. Rca wire. And a fuse holder
Question:	Will it ruin the speakers and/or sub if I connect the remote to the amp while using the high level input connection
Answer:	Yes, twice in the wiring guide it states WARNING: Do not use Remote Turn-on (REM) when using High Level inputs. The guide also says use either High Level inputs or RCA inputs. NEVER USE BOTH!
Question:	Would this system drain to much power from my 2020 civic sedan
Answer:	No its only a 40w fuse pulls about 250w I have it in my chevy s10 pickup and I have a 90w alternator and RUNS fantastic
Question:	Can they be laid on the back to go under a bench seat
Answer:	I guess you could lay it on it’s back but note that the amp heat sink is on the back and would be covered up if laid down. The amp does get warm to the touch with good airflow around it.

Product features

Rockville RG212CA Dual 12" Slim Vented Powered Car Subwoofer Enclosure 2000 Watt

• This ultra-thin subwoofer is designed to be placed at the bottom of the car seat, bringing you a more wonderful journey experience.
• Tuned by a senior sound engineer, it has strong and elastic low frequency, which makes every note vibrate in your ear.
• The two-in-one configuration of the power amplifier and the loudspeaker makes the installation in one step and saves the space inside the car. It has an ultra-thin thickness of 2.7 inches and can be installed under most car seats.
• We provide you with high-quality super-long cables and control wires, so you don't need to buy other accessories.
• Our products have been tested strictly and have reliable quality.

User questions & answers

Question:	Does this need to be wired directly to the car battery or can you use 12v inside car
Answer:	This definitely needs to have the main power wired directly to the positive battery terminal using heavy (at least 10 AWG) wire, with a fuse of around 30-40 amps as close to the battery as possible (within 12 inches) to protect the power wire in case of accidental contact with ground. The negative also needs to be heavy gauge wire with but can go to the nearest good chassis ground (I used a seat bolt with the paint sanded down to bare metal. Mine came with a suitable length of positive and ground cable, an AGU style fuse holder with a fuse for under the hood, and all necessary wire terminals.
Question:	Can you use two of these together
Answer:	I'm sure you could if you can split the bass signal from head unit. Would also have to run dual power lines or upgrade to larger gage then use a distribution block.
Question:	Is amp d class, how many watts RMS
Answer:	10in sub that's powered by a class D for 99 bucks. you'd probably demand the rms to be CEA-rated&compliant, too! I LIKE YOUR STYLE.
Question:	Does this come with the connector for the high level inputs? I don’t see it in any of the picture, just curious. Thank you
Answer:	hi ,you can see it in the last picture.

• All in one 8"(210mm) subwoofer with small unit design to fit under most vehicle seats
• Built-in Class-AB amplifier, "All-In-One Bass Addition Package "no need for external amplifier
• Die-cast aluminum heatsink.High quality material design and craftsmanship.Supports RCA (low level) OR speaker(high level) signal input from audio source
• Adjustable GAIN control to match original vehicle system, so all speakers complement each other
• Easy-to-use control adjustments conveniently located on side of unit. Remote bass volume control knob

User questions & answers

Question:	Can you get any sound out of this thing that does not involve car battery
Answer:	I don’t believe so. The speaker is powered by the built in amp.
Question:	How does one power it? Will it work directly connected to head unit
Answer:	Has built in amplifier. Must be powered from the battery. 8 AWG cable long enough to go to the battery is included with a fuse holder at the battery.
Question:	Can you place it in the spare tire compartments
Answer:	We don't recommend it. Because all the accessories are prepared for under the seat
Question:	Does it directly attach to head unit w/o extra amp or car battery involved
Answer:	Need the car battery to give it power. No extra amp needed I give this product 5 stars sounds great 👍

Product features

Recoil SL1708 400 Watt 8" Under-Seat Slim Amplified Car Subwoofer+Wire Kit

The SL1708 is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space.With a height of just 3 inch, it's a perfect solution when space is an issue as it can easily fit under the seat of most vehicles.The SL1708 has 400 watts of peak power and 120 watts RMS.Systems with a built-in amplifier do not require the addition of an external amp.

High Level Inputs: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SL1708 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

Low Level Inputs: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit.

Product Control Function/Description

• Green Light: Unit is powered "ON" & operational
• Red Light: Unit is in protection mode (See Troubleshooting)
• Phase selection switch 0°(Normal phase)180°(Reverse phase)
• Automatic turn-on mode selection switch（OFF: Unit will turn on when remote wire is triggered with 12-volt signal ON: Unit will turn on when audio is sensed on RCA input）
• Low pass frequency crossover adjustment
• Bass boost adjustment from(0dB)to (+12dB)
• Gain matching control adjustment (This is NOT a volume knob)

Included Items Inside The Package

• 8" Subwoofer Unit
• Owner's Manual
• Installation Wiring Kit
• Velcro Mounting Tape(Male and Female)
• Mounting Bracket with Hardware(Screws)
• Bass Volume Remote Control with Cable

Product description

Keep the bass bumping in your ride with the Kicker 10-Inch Thin Profile Subwoofer Enclosure. Its thin design allows it to fit perfectly behind or under your seat. This quality enclosure is built with heavy MDF construction and thick black carpet for durability. The 10-inch enclosure works best with 600 watts of power, and recommended for use with rap or music with rumble bass. It features 4-ohm impedance and 93.8 dB of sensitivity. Get more out of your music and ride in style with the Kicker subwoofer enclosure.

• Kicker 10-Inch 600 watt vented thin profile subwoofer enclosure
• RMS power: 300 watts
• Max power: 600 watts
• Impedance: 4 ohm
• Thin profile fits perfectly under or behind a seat

User questions & answers

Question:	Anyone run a different sub in this box? Blew mine just woundering if you could and what’s the max depth you ran
Answer:	Yes
Question:	What is the difference between the kicker comp and the comp
Answer:	The comp two has dual voice coils for a flexible design and a higher quality sound. They both sound Awsome the company 2 you can hear the highs a little more.
Question:	Will this fit in a 2015 Silverado double cab
Answer:	This speaker fits easily under the back seat of any truck
Question:	Box dimensions
Answer:	The box is 21 5/8" wide, 7 5/8" at the deepest point, and 15" high. The tapered end depth is 4 1/8"

Product description

Skar Audio created this custom loaded enclosure package to deliver powerful, deep, and tight bass in an all-in-one competition-grade system. This package features two, 12-inch, dual 4-ohm, Skar Audio SDR Series subwoofers, which are pre-loaded and wired up inside of a custom dual 12" ported enclosure. Next, we pair the loaded enclosure of this package with the Skar Audio RP-1200.1D Class D mono-block amplifier, the perfect amplifier to power your new system and matched for perfect compatibility and power handling with the included subwoofers. Finally, we include a premium Skar Audio 4 Gauge OFC premium amplifier wiring kit to install your new system, making installation hassle free. The Skar Audio SDR series of subwoofers were designed to deliver hard hitting, low spectrum sound. Featuring a high flux ferrite motor, these versatile 12-inch woofers are conservatively rated at 1,200 watts max power each. When looking for a system that delivers low end frequencies with authority, look no further. This is the perfect solution for a daily driver that can handle whatever is thrown at it, offering unmatched reliability and sound quality. The enclosure housing the subwoofers features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box. This package was put together by our installation experts to ensure compatibility and allow for an easy installation. We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride.

• All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
• Peak Power: 2,400 Watts, RMS Power: 1,200 Watts
• Includes x1 Skar Audio SDR-2X12D4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure
• Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
• Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit

User questions & answers

Question:	Will this fit in a 2017 ford GT
Answer:	That one I'm not to sure on. But ford GT, nice... You could stop by and we can check it out...lol. Good luck.
Question:	Will this fit in a 2020 hyundai sonata trunk
Answer:	It will if your trunk is 40”wide by 20”deep and 16” tall
Question:	will it fit in a 2006 altima
Answer:	Yes
Question:	Will it fit in a 2005 double cab Tacoma
Answer:	I would say yes. But will not leave much room at all.

• Package Includes: Rockville RWS12CA Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure, Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
• Features of RG212CA: Rockville RG212CA Dual 12" Slim Vented Powered Car Subwoofer Enclosure, Complete all in one system includes built in amplifier, top quality enclosure, and dual 12” subs, Vinyl finished enclosure with side vents tuned to 40Hz, Enclosure is built with ¾” MDF and is ribbed and braced, 2000 Watts Peak power output, 500 Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket
• High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs
• Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class AB amplifier, Extruded aluminum heatsink stays cool even at high volumes, 150mV – 5V Variable Input Level, 12dB Low Pass Crossover Frequency 50Hz-250Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote
• Features of RWK81: Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, 17’ High Grade Twisted Pair of 100% Copper RCA Cable, 17’ 8 Gauge Translucent Blue Super Flex Power Cables, 17’ 18 Gauge Blue Remote Cable, 17’ 16 Gauge Clear Speaker Wire, 3’ 8 Gauge Super Flex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 60 Amp AGU Gold Plated Fuse, 7’ Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

User questions & answers

Question:	Does it fit a 2000 Honda Civic
Answer:	In the trunk all day long
Question:	Will this enclosure fit under the back seat of a 07 tundra double cab
Answer:	It should fit. I'm ordering one for my 07 tundra
Question:	Will this fir under the back seat of a 2001 F150 supercrew
Answer:	Measure how much room you have under the seat. Dimensions of the speaker are on the listing. It’s pretty slim
Question:	Will it find under the backseat of my avalanche
Answer:	IF it does It WILL quit working as mine did and Rockville knows they have a defective remote system in these units from CHI(NA

Product features

Rockville RWS12CA Slim 1200 Watt 12" Powered Car Subwoofer Enclosure + Wire Kit

Description of RWS12CA:

Rockville has developed and perfected a smart, integrated solution for adding bass to any vehicle’s audio system. The Rockville slim powered subwoofer combine subwoofers with matching enclosures and amplifiers for optimal bass performance.

Utilizing a slim but heavy-duty subwoofer, durable enclosure and mono block amplifier designed and engineered to work as a complete system resulting in intense bass response. Featuring a quick-connect Molex high level input with Smart Turn-On Circuitry, the unit easily integrates in to any OEM system with minimal of wiring. Power, signal and remote turn-on are achieved via molded angled terminals for easy access allowing for simple set-up or removal.

The Rockville unit comes standard with a remote bass control, adjustable low-pass crossover, variable +12dB bass boost, and 150mv to 5 Volt gain control. It also features high- and low-level inputs for integration with nearly any factory or aftermarket head unit.

Slim-profile, these loaded enclosures are perfect for car trunks and for behind or under pickup-truck seats that hug the back of the cab. Available in three subwoofer sizes these units will fit in any tight area. The units are the smallest sub boxes designed by Rockville, but don’t let their small size fool you, they are ready to explode with high power - super intense bass and extraordinary SPL levels. Rockville has produced a true high-performance completely integrate active/amplified woofer system – in a compact footprint.

By taking all the ground-breaking technology from the Rockville shallow-mount T3 subwoofers producing real, head-pounding bass, combined with a tough Rockville carpeted MDF box enclosure and Rockville class leading mono block amplifier these diminutive enclosure are perfect for placement anywhere in any vehicle. So save space in your trunk or hatch with the Rockville all-in-one drop-in bass solution and still have plenty of hauling space.

Product description

Skar Audio introduces the SDR-2X10D4 Dual 10-inch loaded Vented subwoofer enclosure to cater to the audiophile who wants a competition grade system in their Vehicle without all of the headache involved with designing it from the ground up. This loaded enclosure features two of our extremely popular SDR-10 D4 1, 200 Watt Max power subwoofers which combined come in at 2, 400 watts Max power for the pair. The woofers come pre-loaded and wired up inside of this custom dual 10" Ported enclosure, which features a unique kerf middle port and split chamber woofer design, allowing for extreme levels of bass output. Furthermore, the enclosure is finished in premium grade black carpet for a sleek appearance and features the Skar Audio logo in white on the top surface of the box.



this enclosure was engineered by Skar Audio specifically for the woofers that are loaded in it, ensuring perfect sound and compatibility. Every subwoofer is different, and it is so critical when buying woofers to ensure that the woofers and enclosure are an ideal match, or you will lose sound quality and output. With this loaded Subwoofer Enclosure model, All of those concerns are eliminated, making it easier than ever to add powerful aftermarket bass to your vehicle.

• Sdr series dual 10-inch Dual 4-ohm loaded Subwoofer Enclosure
• Peak Power: 2, 400 Watts, RMS power: 1, 200 Watts
• Pre-wired Internally for a 1 Ohm Final Impedance Load at the terminals for an easy installation
• Premium Vented Enclosure Made of 5/8" Mdf and finished in black Carpeting
• Double front baffle (1.25") with countersunk subwoofer design for Flush and attractive appearance

User questions & answers

Question:	Will this fit a 2004 Ford Mustang
Answer:	Yes it should they are pretty compact for being such powerful subs
Question:	Will the Rockville db25 push the subs
Answer:	Pushing is a bully tactic and will not be tolerated
Question:	Will these fit in a 2003 Mitsubishi eclipse
Answer:	yes
Question:	Will it fit behind third row seat in my 2006 Ford Expedition xlt
Answer:	Yes.

Product features

Product Specifications

• Includes Subwoofer Pre-Loaded Into Subwoofer Enclosure
• Skar Audio SDR-10 D4 - 10" Dual 4 Ohm Subwoofer
• Peak Power: 2,400 Watts (pair) | 1,200 Watts (each)
• RMS Power: 1,200 Watts (pair) | 600 Watts (each)
• Frequency Response: 30 - 300 Hz
• 2.5" High Temperature Copper Voice Coil

Product description

The SS8P is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 2.8" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is clean and simple. This is a true all in one subwoofer solution with the subwoofer built into the enclosure along with a top of the line amplifier built in as well.



We focused on making installation a breeze so we designed this unit with you the customer in mind. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.



The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Something else we did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitor’s models are more challenging to install.



The SS8P has 400 watts of peak power and 100 watts RMS. This has great controls so you can adjust the sound to your liking. It has a level control for the volume and subsonic filter to filter out the really low frequencies which the human ear cannot hear. This also has a low pass crossover filter, phase control, input sensitivity, and bass boost.



Included is a remote bass knob, and mounting hardware but the best thing about our model is the sound. It is slim but it sounds like a full sized subwoofer If you are not happy with it we will offer you a 90-day money back guarantee. If you don’t like the sound, we will send you a pre-paid label and refund you in full!

• Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub.
• Enclosure is made out of cast aluminum which stays cool at all times.
• Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet.
• PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
• Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit.
• Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
• Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD: < 0.4%.

User questions & answers

Question:	Is it normal for the wired remote control to get smoking hot
Answer:	The remote on my unit hasn’t gotten that hot and I've been on 6hr trips with the unit running without any issues
Question:	It will fit in a vw golf mk7 spare tire
Answer:	Dimensions: 14.17” diameter x 5.7” height. These are the dimensions of the subwoofer, check the measurements of your car.
Question:	How would you hook up two
Answer:	With a RCA splitter
Question:	What all do i need to make it work
Answer:	Amp install kit is really all you need

Product features

Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub

The SS8P is an all in one solution to give you great sounding bass in your vehicle without taking up a lot of space. This sub enclosure is only 2.8" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is clean and simple. This is a true all in one subwoofer solution with the subwoofer built into the enclosure along with a top of the line amplifier built in as well.

We focused on making installation a breeze so we designed this unit with you the customer in mind. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.

The smart turn-on circuit will sense that an audio signal is present and turn on the amplifier. When you turn off your music signal the amplifier built into this subwoofer system will automatically turn itself off. Something else we did to make installation quick and easy is we put all the inputs and outputs on one side. This makes wiring neater and easier. Our competitor’s models are more challenging to install.

The SS8P has 400 watts of peak power and 100 watts RMS. This has great controls so you can adjust the sound to your liking. It has a level control for the volume and subsonic filter to filter out the really low frequencies which the human ear cannot hear. This also has a low pass crossover filter, phase control, input sensitivity, and bass boost.

Included is a remote bass knob, and mounting hardware but the best thing about our model is the sound. It is slim but it sounds like a full sized subwoofer If you are not happy with it we will offer you a 90-day money back guarantee. If you don’t like the sound, we will send you a pre-paid label and refund you in full!

Features:

Product description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

• High-flow, low-noise port design.
• Constructed with 5/8-Inch MDF
• 11 AWG input terminals
• Dimensions: (inches)13.5" x 27.375" x 5.25" (bottom) x 3.25" (top)

User questions & answers

Question:	Will it fit behind the seat of a 2014 f
Answer:	I would think it would. We had it behind the seat of an 87 gmc truck.
Question:	Does anyone know if this will fit behind a reg cab 2nd gen tacoma
Answer:	No. I have a 2nd gen Tacoma and a full size GMC. It will fit in the GMC but not in the Tacoma.
Question:	What's the ohm rating
Answer:	Its a 4 ohm dvc wired inside to give you a 2 ohm load. Hope this helps, if not I will be glad to answer more questions if needed.
Question:	What wiring kit should I buy for this
Answer:	We went with a 4 Gauge wire kit like this: http://www.amazon.com/Rockford-Fosgate-RFK4X-Complete-Amplifier/dp/B0012BYOSK/ref=sr_1_5?ie=UTF8&qid=1390091839&sr=8-5&keywords=Complete+4+Gauge+Amplifier+Installation+Kit . We also added a 1.0 Farad Capacitor which is probably considered old school by today's installation practices, but it works and the punch from the Sub does not cause dimming of the lights and doesn't get hot. It was a great match up and now for over 6 months has performed very well. We also used a 600 Watt Sony Mono Amplifier as it match the spec's for the sub. Mind you, we don't push the sub hard like others may do... This sub and enclosure combo isn't made to do that, but it does give a pretty decent punch when demanded by the music being played. If you want a lot of punch then consider a different sub enclosure

Product features

Rockford Fosgate R2S-1X12 R2 Shallow Prime Single 12-Inch Subwoofer Enclosure

Description:

When you have no space for bass, our PRIME R2S 12" shallow loaded enclosure is sure to be a perfect fit for your ride and your budget. These shallow loaded enclosures can fit in tight spaces due to the slim-line depth of 3.25" on the top and 5.25" on the bottom. The wedge design is optimized for single-cab trucks with limited seat travel.

• Constructed with 5/8" MDF
• Covered with high density carpet
• High current binding posts

Product description

Give your vehicle's audio system an upgrade with the SSL LOPRO10 Class a/b 10"" Low profile amplified subwoofer. This powerful amplified subwoofer Features 1200 watts Max power with a MOSFET power supply to take your music to the next level. With high and low level inputs It can be hooked up to just about any In-Dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the variable low Pass Crossover, bass boost, subsonic filter, phase control and remote subwoofer control. Gear up and get your music thumping with the sound storm LOPRO10. For further product details, please scroll down.

• Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
• VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• Low level inputs: line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it
• Dimensions: 15” x 9. 75” x 3”. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
• : sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality

User questions & answers

Question:	Is this subbwoofer water resistant, for use on a boat
Answer:	Not waterproof. You would have to put it in a waterproof enclosure.
Question:	Would this do a good job in a mini van? Not looking to entertain the neighboring car, but would like to enjoy the bass and keep it out of sight
Answer:	I think it would work very well in a mini van. I put this behind the backseat of my 2004 Frontier Crew Cab and because the cabin is relatively small and I can barely turn it on without being overwhelmed. I think it would work perfectly well in a much larger vehicle. Honestly, I'm blown away by how well this simple sub performs and how small/thin it is. Never would have believed it if I hadn't bought it.
Question:	What hardware or tools I need for the installation of the Sound Storm Laboratories LOPRO10 LoPro Series Low Profile Amplified 10-Inch Subwoofer
Answer:	You will need an inexpensive amp wiring kit, I used the 4 guage kit available here and wire strippers or a razor knife would work and a cable end crimper or even some pliers would work just fine for crimping wire ends on. the amp itself comes with everything to mount it two different ways, the easiest way especially if you are mounting it to carpet is the adhesive backed Velcro tape, that's how I mounted mine, I have two of them installed in the rear hatch floor of a fiat 500, the Velcro is very effective or you can use the metal screws that are also included.
Question:	Can someone say what are the actual measured dimensions of the product and fuse amperage please
Answer:	Actual dimensions of the unit are 15x12x3. The box it comes in is 18x14x5.

Product features

Deep Bass Low Profile

Enjoy the rich sound of Bass in just about any vehicle with the SSL LoPro10 Class A/B 10 inch Low Profile Amplified Subwoofer. With 1200 Watts Max Power and MOSFET power supply and High and Low Level Inputs, this Amplified Subwoofer can be hooked up to just about any in-dash stereo. With a height of just 3 inch, it's a perfect solution when space is an issue as it can easily fit under the seat of most vehicles. Customize the sound with the Variable Low Pass Crossover, Subsonic Filter, Phase Control and Remote Subwoofer Control.

Break Your Subwoofer In

This process involves subjecting the subwoofer to no more than low-to-medium volume levels for a number of hours in the enclosure. 3-4 hours is generally sufficient for the subwoofer’s suspension to loosen enough to prevent the voice coil(s) from overheating and causing failure. The break-in period is also effective in extending subwoofer life.

Built-In Amp and High and Low Level Inputs

Systems with a built-in amplifier do not require the addition of an external amp. They already have the power to play louder.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Variable Low Pass Filter and Subsonic Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Subsonic filter restricts low-frequencies below the specified setting for better subwoofer protection and performance.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Phase Control

Phase control lets you switch the speaker phase with the amp if your speakers or subwoofer are hooked up 'out of phase'.

Low Profile

Low-profile subwoofers are a great choice for space-constrained areas without compromising on power and performance.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

• Single 8-Inch Vented Loaded Subwoofer Enclosure Bass Tube (Passive)
• Peak Power: 400 Watts, RMS Power: 200 Watts
• Dual 2-ohm Voice Coil Subwoofer wired internally to a 1-ohm Final Impedance Load
• Highly Efficient and Powerful Subwoofer, Frequency Response Range: 35Hz - 250Hz
• Vented Enclosure Tube Design Delivers Powerful and Responsive Bass Output

User questions & answers

Question:	Can this be used in a marine application? It would be on a pontoon in the helm protected from water
Answer:	Yes and no. I do have mine installed under the leaning post seat of my center console fishing boat. But it is made of MDF. Medium Density Fiberboard.. Google "Wet MDF". But if you keep it dry and remove it when washing your boat you may be just fine. For the cost, fit and performance. I could almost justify buying a new one every year. The speaker itself will hold up fine. The box would be the concern.
Question:	Will this work with a 2 Ohm amp? Also can you pop in a new woofer if this one blows
Answer:	It should if rewired as a 4ohm load. But won't be as loud as a 1ohm amp. Most 2 ohm amps are stable at 4ohms but have less outpuf. You certainly could replace it with a woofer to match your amp.
Question:	Which Skar Audio Amp does the manufacturer recommend for this
Answer:	SK-M5001D

Product features

Product Specifications

• Includes 8" Subwoofer Pre-Loaded Into Subwoofer Enclosure
• Peak Power: 400 Watts
• RMS Power: 200 Watts
• Voice Coil Type: 1.5" Dual 2 Ohm
• Final Ohm Load At Terminal: 1 Ohm