14 best tweeter for home speaker
A tweeter is a critical component of a speaker system, whether it's for home audio, car audio, or other applications. It is designed to reproduce high-frequency sounds, such as treble and upper midrange frequencies, to enhance the overall audio quality. Here's what you need to know about tweeters:
Purpose: Tweeters are responsible for producing the high-frequency audio range in a speaker system.They handle sounds like cymbals, high-pitched vocals, and certain instruments that contribute to the overall clarity and detail of the audio.
Types of Tweeters: There are several types of tweeters available, including:
Dome Tweeters: These are among the most common and are characterized by a soft or hard dome-shaped diaphragm. Soft dome tweeters are known for their smoother sound, while hard dome tweeters are more durable and capable of handling higher power.
Piezoelectric Tweeters: These tweeters use a piezoelectric crystal to produce sound and are often found in car audio systems due to their compact size and efficiency.
Ribbon Tweeters: Ribbon tweeters use a thin, lightweight metal ribbon to reproduce high frequencies, offering excellent accuracy and clarity.
Crossover: In multi-driver speaker systems, tweeters are paired with woofers and midrange drivers. A crossover network is used to ensure that each driver reproduces the appropriate range of frequencies. Tweeters handle high frequencies, while woofers handle the lower frequencies.
Materials: Tweeter diaphragms are made from various materials, including silk, fabric, metal, or ceramics. The choice of material can impact the tweeter's sound characteristics.
Mounting and Placement: Tweeters can be flush-mounted or surface-mounted, depending on the speaker design and application. Proper placement and angle are crucial for optimal sound dispersion and imaging.
Power Handling: Tweeters have a specified power handling capacity, which indicates the maximum amount of power they can safely handle. It's important to match the tweeter's power handling capabilities with the amplifier's output for balanced sound and to prevent damage.
Impedance: Tweeters typically have an impedance rating (usually 4 or 8 ohms), which should match the overall speaker system's impedance for proper connectivity and performance.
Sound Quality: High-quality tweeters contribute to better sound quality by reproducing high-frequency details and improving the overall listening experience.
Crossover Frequency: The crossover frequency determines at which point the tweeter takes over from the midrange driver. It's an important parameter to consider when designing or selecting a speaker system.
Upgrades: Many enthusiasts and audiophiles choose to upgrade their tweeters to enhance their speaker systems' sound quality. This can involve replacing factory-installed tweeters with higher-quality aftermarket options.
In summary, tweeters are essential components of speaker systems, whether for home audio or car audio applications. They are responsible for reproducing high-frequency sounds and play a crucial role in achieving clear and detailed audio output. Tweeters come in various types, materials, and designs, allowing users to choose the one that best suits their audio preferences and needs.
Below you can find our editor's choice of the best tweeter for home speaker on the market
NEUMI CS5 Center Channel Speaker, Dual 5-Inch Woofers, 1-Inch Tweeter, Dark Wood, Single
NEUMITECH
Product description
The CS5 is a center channel speaker from NEUMITECH, designed for the budget-conscious music and movie lover who wants a simple, affordable, yet great sounding center channel speaker as part of a home theater system. Due to its passive design, the CS5 requires a separate amplifier or receiver in order to play audio from a TV, game console, or DVD/BD player. With classic styling cues, the CS5 is attractive yet unassuming, making it a great fit for a wide variety of home decor. Tuned for a neutral sound signature, you will love its balanced sound with excellent midrange dynamics and superior bass extension.
Dual 5-Inch Fiberglass Woofers With Rubber Surround: Made with a combination of rigid lightweight fiberglass cone and supple rubber surround, the CS5’s dual woofers have been tuned to offer a great balance of bass and midrange output, doing so with exceptionally low distortion at normal listening levels.
1-Inch Silk Dome Tweeter with Waveguide: The outcome of countless hours of design refinement, the CS5’s tweeter produces a smooth, extended, and predictable treble response with the help of its integrated waveguide. The result is music and movie dialogue full of accurate detail and precise imaging.
Rear Ported Enclosure: The CS5’s enclosure is designed to minimize driver spacing, reducing the effects of off-axis lobing. Its rear-ported design allow for a more compact design. The magnetic grill system eliminates unsightly mounting holes.
Woofers: 5" fiberglass cone with rubber surround
Tweeter: 1” silk dome with waveguide
Crossover: 12dB/Octave tweeter and woofer
Enclosure Type: Dual rear ported
Frequency Response: 65Hz-20kHz (Typical In-Room)
Nominal Impedance: 6 Ohms
Sensitivity: 88dB 1W/1M
Power Handling: 15-100 Watts/Channel
Dimensions (each): 5.7” (H) x 14.7” (W) x 8.5” (D)
Weight (each): 10 lb
- Designed for the budget-conscious music and movie lover who wants a simple, affordable, yet great sounding center channel speaker as part of a home theater sound system
- Due to its passive design, the CS5 requires a separate amplifier or receiver in order to play audio from a TV, game console, or DVD/BD player.
- Dual 5-Inch Fiberglass Woofers With Rubber Surround: Made with a combination of rigid lightweight fiberglass cone and supple rubber surround, the CS5’s dual woofers have been tuned to offer a great balance of bass and midrange output, doing so with exceptionally low distortion at normal listening levels.
- 1-Inch Silk Dome Tweeter with Waveguide: The outcome of countless hours of design refinement, the CS5’s tweeter produces a smooth, extended, and predictable treble response with the help of its integrated waveguide. The result is music and movie dialogue full of accurate detail and precise imaging.
- The CS5’s enclosure is designed to minimize driver spacing, reducing the effects of off-axis lobing. Its rear-ported design allow for a more compact design. The magnetic grill system eliminates unsightly mounting holes.
User questions & answers
| Question: | Does it have a crossover |
| Answer: | Only real Apple batteries can you expect 1,000 cycles out of them. Is real simple, buy this for 500 expected cycles, pay 2x to add another 500. Depends how long u expect to keep the laptop. |
Pioneer pro Series TS-B400PRO 4" 500W Bullet Tweeter
PIONEER
Product description
Pioneer pro Series TS-B400PRO 4" 500W Bullet Tweeter
- Titanium Diaphragm and Aluminum Die-Cast Chassis
- Designed for High Sensitivity and High Power Handling
- Package Contains 1 Unit
User questions & answers
| Question: | Do they 8ohm tweeter 4inch |
| Answer: | On the listing page, below the buy now button, you can find "sold by puredick and fulfillment by amazon", click puredick and ask a question, you can contact the service team.We will try our best to help you if you meet any problem. |
| Question: | What amp what I want to wire up to 2 of these |
| Answer: | No there is not. But it does come with the proper tools needed to unscrew and remove all the parts for the install. I used a YouTube video to walk me through it. Very easy. Make sure you find the correct YouTube video for the correct model of laptop that you have. |
| Question: | can they be install in the door of my car |
| Answer: | yes,it is normal, it depends on how you use it,you can charge it longer if you turn off those unnecessary software. |
| Question: | Are these ones , the ones showed in the picture of pioneer.com, because on that picture the middle of the component is red, and on this one it is gray |
| Answer: | I cannot answer this question but I can tell you the battery was faulty and did not work. It never held a charge. I got a new one and it still did not. Save your money |
Pyle-Pro PAHT4 4 Way DJ Tweeter System
Pyle
Product description
The Pyle Pro PAHT4 can help you fix the problem of soft, muddy, and flat sounding PA systems. Add this speaker cabinet to your existing system and give it the treble boost you've been looking for. If you're in the market for a compact, functional, and powerful tweeter system - look no further. The Pyle PAHT4 features four 3" Piezo Tweeters, creating a Frequency Response range of 4kHz~27kHz. Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear.
- 150 Watts RMS - 300 Watts Peak Power Handling - Carpeted MDF Enclosure
- 4x 3" Piezo Horn Tweeters
- Frequency Response: 4kHz~27kHz - 8 ohms
- Quick Connect Spring Lever Speaker Terminals
- Sensitivity(1w/1m): 97dB
User questions & answers
| Question: | Is there a passive crossover or capacitor internally to block the low end |
| Answer: | I returned product back to vendor. |
| Question: | What kind of wires do I need to hook this up to my iPad |
| Answer: | They are not or worth it. Spend more for better sound |
| Question: | Do I have to purchase wires separately to hook it up to a car |
| Answer: | I honestly would recommend you upgrade to a better speaker |
| Question: | Whats the best way to hook this up to my car? I can only assume that I would connect it to the left and right speaker wires on the rear speakers |
| Answer: | Hi, our sincere apologies but we don't have accurate information here about your car. The Product Dimension: 4.02'' x 4.02'' x 2.09'' inches and the mounting depth is1.81'' inches. Thank you. |
300 Watt Marine Tweeter Speaker - 3.75” Aluminum Bullet Horn w/ 1” Titanium Dome Tweeter, 2k-25kHz Frequency Response, 4 Ohm Impedance, Heavy Duty 20 Oz. Magnet Structure - Pyramid TW28 (Pair)
Pyramid
Product description
Pyramid TW28 3.75 Inch Aluminum Bullet Horn In Enclosure with Swivel Housing
- 2k 25kHz FREQUENCY RESPONSE: Pyramid’s 3.75” aluminum bullet horn with 1” titanium dome tweeter speaker has enhanced Ferrofluid and 2k 25kHz frequency response that will complete a sound system of a boat or any marine vehicle or woofer enclosure
- 300 WATT POWER: This bullet horn super tweeter speaker provides up to 300 watts peak power because it is equipped with 20 oz magnet structure. It's all housed in heavy duty aluminum with swivel housing
- 4 OHM IMPEDANCE: This marine speaker has 4 ohm impedance rating that compensates the undersized wire found in many of today’s marine vehicles. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- STANDARD SIZE: Pyramid follows the standard size for most marine stereo systems and created this set with a 1” audio tweeter plus an aluminum frame. The heavy duty housing and structure provides a strong foundation
- COMES IN PAIR: This set of tweeters come in a pair in a gift box with all necessary hardware which is very easy to install with compensation capacitors. Additional feature includes 1”high temperature voice coil
User questions & answers
| Question: | Are they aluminum ? Th |
| Answer: | Yes |
| Question: | Do they come in pairs |
| Answer: | Positive is bigger wire or if it's a clear wire , when u strip it , gold is always hot |
| Question: | Home use. Other sites list TW28 as 4ohms. Back of TW28 says 4-8ohms. OK to run speaker wires directly from 8ohm speaker terminals to TW28 terminals |
| Answer: | Honesty it’s 50 Watts a channel but I have 100 going to each speakers and have never had a problem. Great sounding speakers that are underrated |
| Question: | What's the recommended type of cable connector for these speakers |
| Answer: | No |
Pyle Pair 8” Bluetooth Flush Mount In-wall In-ceiling 2-Way Universal Home Speaker System Spring Loaded Quick Connections Polypropylene Cone Polymer Tweeter Stereo Sound 250 Watts (PDICBT852RD)
Pyle
Product description
The Pyle Home Bluetooth Speaker System provides in-wall / in-ceiling mounting convenience. Deliver effortless stereo sound to any room in your home or office with wireless music streaming ability. Activate Bluetooth audio via the integrated function switch and enjoy the ability to stream your sound from all of today’s latest Bluetooth devices (like smartphones, tablets, laptops and computers). System includes one active speaker, one passive speaker, speaker connection cable, built-in digital sound amplifiers, along with an external power supply adapter. Mount the speakers in a convenient location on flat wall or ceiling panels for a flush, clean look. Achieve wide-range sound performance and add audio to any room with the Pyle In-Wall / In-Ceiling Bluetooth Speaker Kit.
Features:
- Includes Speakers (Active + Passive)
- Bluetooth Wireless Music Streaming Ability
- 2-Way Full Range Stereo Sound
- Built-in Digital Sound Amplifier
- Mounts Flush to Walls or Ceilings
- Screw Terminal Block Speaker Connectors
- Ability to Daisy-Chain Speakers for Stereo System Sound
- Perfect for Custom Installations & Applications
Bluetooth Connectivity:
- Includes Bluetooth Control Receiver
- Stream Wireless Audio from Your Connected Device
- (Smartphone, Tablet, Laptop, Computer, etc.)
- Bluetooth Network Name: ‘Pyle USA’
- Bluetooth Network Password: ‘0000’ (4 Zeroes)
- Bluetooth Version: 3.0
- Wireless Range: Up to 40’+ ft.
What’s in the Box:
- 6.5’’ Active Speaker
- 6.5’’ Passive Speaker
- 12V Power Adapter
- Speaker Connection Cable, 16’ ft.
Technical Specs:
- MAX Power Output: 300 Watt
- Sound System: 6.5’’ Speaker + 1’’ Tweeter
- Impedance: 8 Ohm
- Efficiency: 88dB
- Frequency Response: 70Hz-20kHz
- Power: 100/240V, 12V Power Adapter
- Total Speaker Size: 9.4’’ Diameter, 3.9’’ Depth
- Cut-Out Size: 7.9’’ Diameter, 3.7’’ Depth
- Single Speaker Weight: 4.85 lbs.
- Sold as: Pair
- Weight: 8.48 lbs.
—— SATISFACTION GUARANTEED ——
Your satisfaction is our #1 priority. If this item fails to meet your expectations we will accept it back a full refund within the first 30 days. We also stand behind this product with a limited 1-Year manufacturer warranty. Contact us if the item should show any defect within the first year we will help exchange it for a new one.
- BLUETOOTH Built in Bluetooth no hassle wireless music streaming from all your favorite Bluetooth enabled devices Perfect for incredible stereo sound in any room in your home from speakers you can barely see without using any floor or shelf space
- SPEAKER GRILL Includes built in round stain resistant speaker grills Match existing flush mounted designs in your home or workplace for a clean look & achieve wide range sound performance without compromise
- SEAMLESS INTEGRATION Perfect sound wherever you need it Great for existing home theater systems and custom applications this Pyle 2 way in ceiling or in wall speaker system will deliver on demand crisp audio sound clarity all the time
- FLUSH MOUNT DESIGN Compact flush mount design for simple easy installation in wall / in ceiling , or pre cut speaker openings, for in home use, office, professional, or custom audio applications on any flat surface
- EASY TO INSTALL Includes a cut out size template & quick connect spring loaded speaker terminals with spring loaded fixing clips for simple, easy, no hassle installation with included speaker connection wire, bluetooth Controller & power supply
- In Wall / In Ceiling System Built in Bluetooth for Wireless Music Streaming Quick Connect Spring Loaded Speaker Terminals 1/2’’ High Compliance Polymer Tweeter Polypropylene Cone with Rubber Edge Cut Out Size Template for Easy Installation Environmentally Friendly ABS Construction Sensitivity: 89 dB
User questions & answers
| Question: | What mounting bracket can I use for these speakers |
| Answer: | Hi, you don't need to use a bracket to this unit. All you have to do is to cut a hole that fits the speaker then use a bolt screw to secure the unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PDICBT852RD for more details. Thank you. |
| Question: | Since the recommended wire has mixed reviews, can I use either a red/black 14-16 awg or copper wire |
| Answer: | I'm not sure what type of wire the guys used that installed mine however it was not what came with the speakers. They said great speakers need better wire so we bought different. Speakers are awesome!! |
| Question: | como como funcionan |
| Answer: | Thank you for bringing this to our attention. It works using Bluetooth. |
| Question: | What if i want one set in one room and one set in another, but i want them to play at the same time? can both sets use the same bluetooth source |
| Answer: | Not with your smartphone, only with laptop if you have IOS, something about 1 Bluetooth chip per device. Laptops have more capability. You can link both speakers together with MacBook but you need to do it each time and they both have to be in range |
Sony SSCS5 3-Way 3-Driver Bookshelf Speaker System (Pair) - Black
Sony
Product description
Introducing a speaker series versatile enough to deliver an unprecedented and real audio experience, and with a soundstage so expansive you can feel the energy and passion of the original performance, all while staying in harmony with your existing living spaces-no special listening room or setup required.
- 3-way, 3-speaker bass-reflex system, 5-1/4 inches Foamed-Mica Cellular Reinforced Woofer, 1 inch Polyester Main Tweeter
- 3/4 inches Sony Super Tweeter for immersive sound staging, Sound Reproduction to 50kHz (for High Resolution Audio), 6 ohm Speaker Impedance
- Optimized Crossover componentry for a clear audio path, 100 W Maximum Input Power.Front Speaker Input terminal:Screw type
- Front Speaker Rated Impedance: 6 ohms
User questions & answers
| Question: | What is the frequency response |
| Answer: | 53–50,000 Hz frequency response that is the specs from the Sony product page |
| Question: | How is the bass to use without subwoofer |
| Answer: | The SSCS5 has respectable bass response for a bookshelf, down to 50 Hz or so, but I would highly recommend you pair with a decent subwoofer for best results. I use the SSCS5 in a 2.1 setup in our master bedroom and they absolutely slay for movies and music! The imaging and soundstage is spectacular. Really no need for a full surround setup if space is limited or you don’t want to monkey around with wiring rear speakers. However, pairing these with a good subwoofer makes a world of difference in the impact you will experience for movies. If you listen to a lot of electronic music, a good sub is a must. |
| Question: | What are the size(diameter) of tweeters / midranges / subwoofers ? And do these have passive crossovers inside |
| Answer: | Dear Kim,There is a passive crossover in the speaker. 3/4" Super tweeter, 1" Tweeter, and 5 1/4" Woofer.Eric C |
| Question: | This price is for a pair or are sold individually |
| Answer: | Is this a pair of speakers or just one? |
Product features
3-way 3-driver Bookshelf Speaker System
Introducing a speaker series versatile enough to deliver an unprecedented and real audio experience, and with a soundstage so expansive you can feel the energy and passion of the original performance, all while staying in harmony with your existing living spaces-no special listening room or setup required.
Pyle Pro PAHT6 4 Driver Tweeter System
Pyle
Product description
The Pyle Pro PAHT6 can help you fix the problem of soft, muddy, and flat sounding PA systems. Add this speaker cabinet to your existing system and give it the treble boost you've been looking for. If you're in the market for a compact, functional, and powerful tweeter system - look no further. The Pyle PAHT6 features six 2.5" Piezo Tweeters, creating a Frequency Response range of 4kHz~27kHz. Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear.
- 150 Watts RMS - 300 Watts Peak Power Handling - Carpeted MDF Enclosure
- 6x 2.5" Piezo Horn Tweeters
- Frequency Response: 4kHz~27kHz - 8 ohms
- Quick Connect Spring Lever Speaker Terminals
- Sensitivity(1w/1m): 97dB
User questions & answers
| Question: | Does it come with the tweeters |
| Answer: | They r tweeters |
| Question: | Does this have air ports |
| Answer: | No,It Is Sealed, They Are Tweeters... There Is No Cone Movement, Therefore There Is No Need For 'Bass Reflex' vs Ported. |
| Question: | Can I use these with my television to hear high frequency sounds better |
| Answer: | yes, you will hear the high frequencies better, but don't turn these up too much, because it will produce too many high notes causing it to be unbalanced. |
| Question: | Can I put my own 4 inch speakers in |
| Answer: | It should work but it will not fit in the hole you will have to make the hole much bigger. If yours still works that’s great but mine in less than a month the speakers went bad. I replaced them they also went bad. I tried to use my 4 inches it work just for a little then everything stopped working so I put it away |
Dayton Audio T652-AIR Dual 6-1/2" 2-Way Tower Speaker Pair with AMT Tweeter
Dayton Audio
Product description
Enjoy the light and airy high frequencies from the Dayton Audio T652-AIR tower speakers. Featuring the same design DNA as the B652-AIR speaker from Dayton Audio, the T652-AIR model incorporates dual woofers into a compact bass-reflex tower cabinet, for unobtrusive yet modern aesthetics and incredibly deep bass, and features an AMT tweeter for an extended frequency range. Like the B652-AIR, the T652-AIR is all about giving you the most performance for your money while offering a little something extra from the fantastic AMT tweeter.
- Dual 6-1/2" woofers provide superb bass response and punch
- 1" AMT tweeter for smooth, accurate reproduction
- Slim-profile tower cabinet won't overwhelm your room
- Ported bass-reflex design delivers extended, deep bass to 45 Hz
- Clarity and detail that is exceptional in this price class
User questions & answers
| Question: | How tall is the speaker |
| Answer: | Thanks for your inquiry. Yes, there is a crossover inside. Besides, this speaker is in transit to the Amazon warehouse and will be available in January 2021. Kind regards |
| Question: | I don’t see dimensions of the box, can you please let me know and have them added to Amazon site? Thank you |
| Answer: | Dear buyer, Yes,All Puredick Laptop batteries have 12-months warranty. Any qusestions, Please contact us via email.The Link:https://www.amazon.com/hz/help/contact/A3GFH44P8N0YZH .We will try our best to help you solve the problem |
| Question: | Whats the ohm rating |
| Answer: | Please Know that A1370 Macbook Air has two kinds of battery.MacBook Air A1370 Late-2010 use A1375 Battery(this battery.). MacBook Air A1370 Mid-2011 use A1406 Battery. |
| Question: | Buenos dias ,este es el precio por el par de woofer |
| Answer: | Yes,this battery is A1375 Battery.Suit for A1375 and macbook air A1370 2010 Version.Can not used for 2011 version. |
Monoprice 3-Way Carbon Fiber in-Wall Column Speaker - 6.5 Inch (Each) with Ribbon Tweeter - Amber Series, White (115700)
Monoprice
Product description
In-wall speakers are the ideal combination of sound quality and styling. Rather than cluttering the room with large box speakers trailing speaker wires, The speakers are virtually invisible, while filling the room with high fidelity audio. Featuring a removable and paintable grille, This 3-Way speaker uses a carbon fiber woofer cone with rubber surround for deep, impactful bass, A carbon fiber mid-range driver for tight, articulate midst, and a ribbon tweeter for sweeter and smoother high frequencies. ribbon tweeter: a ribbon tweeter is composed of a very thin metal diaphragm suspended in a powerful magnetic field. It is capable of very high acceleration, which means that it is very responsive to musical nuances. Ribbon tweeters have a wide horizontal dispersion and a very tight vertical dispersion, thereby increasing the size of the audio "sweet spot". carbon fiber drivers: Carbon fiber is a very lightweight and rigid material, making it ideal for speaker drivers. The lightweight ensures that the driver can respond quickly to musical nuances, while the additional rigidity results in improved accuracy and a flatter frequency response. The result is a is deep, impactful bass, and tight, articulate midst, without a hint of distortion. high frequency attenuator: the high-frequency attenuator can reduce high frequencies by 0, -3, or -6 db. This allows you to fine tune the speaker's high-end response to compensate for a particularly "bright" Listening environment. magnetic grille: The removable grille attaches to the speaker using powerful magnets, to ensure that the powerful bass does not cause Rattle. The grille is paintable and features a slim bezel, allowing it to more easily blend into your home's decor. higher Sensitivity, deeper bass, and higher power handling: Carbon fiber is a lighter and stiffer material than what is normally used in speaker drivers. This means that the drivers can respond quickly to musical nuances, are more accurate, and have a flatter frequency response. The result is deep, impactful bass and tight, articulate midst, without a hint of distortion. • 4. 5" X 3" Ribbon tweeter bull; 100 watts RMS, 200 watts maximum power handling capacity bull; 6. 5" Carbon Fiber bass and mid-range drivers bull; 56 Hz to 20 kHz frequency response• 8-ohms nominal impedance• removable and paintable grille• 89dB sensitivity• magnetic grille
- Sound QUALITY: life is too short for speakers that don't sound great! We believe that the whole point of listening to music is to hear it as the artist intended. Our engineers and Audio experts have spent countless hours listening to and comparing various speakers until we were satisfied we had found models that fit Our demanding standards.
- Style: while Monoprice believes in function over form, there is nothing wrong with having speakers that look good, too. These reduce clutter by getting your speakers off the floor or bookshelves, and the removable grille can be painted to match your walls, so it virtually disappears from view.
- Simplicity: installation is as easy as it can get. Use the included cutout template to mark your wall, make the cut, then using only a screwdriver, secure the speaker to the wall with the easy install mounting tabs.
- Carbon fiber woofers are lighter and stiffer than conventional materials used in speaker manufacturing. The speaker cone is more sensitive to power, which means that you get more volume using less power. Additionally, the stiffer material means deeper bass and higher power handling, with significantly less distortion.
- 150 watts RMS/300 watts peak power handling capacity. 10in Carbon fiber woofer with rubber surround. 33 230 Hz frequency response. Removable and paintable grille
- Connectivity technology: Auxilliary
User questions & answers
| Question: | is this pair |
| Answer: | Ok |
| Question: | would this work as ceiling speaker ?? No matter any opinion, just asking about performance |
| Answer: | these tweeters are 4 ohms; the nominal power is 200W (constructor; measured with white noise meaning less with fixed frequency) . If you connect 2 in series (total of 4 for stereo) you should also connect the 2 caps in series. The max power for amplifier is then 400W @ 8 ohm. in series you have a safety for power transients (poks!!!) I recommend to do this wiring. Another possibility is connect them in // then you have a power of 400 W @ 2 ohm. In this case each should have its own cap in series. For cars this can be better as voltage at output can be lower and more power for amp at 2 ohm. If the amplifier is not designed (and cooled) for 2 ohm you will destroy the amplifier or have overheating) then connect them in series |
| Question: | What is the total Height and Width |
| Answer: | What kind of car you I have toyota lasso I install 3" in my door. |
| Question: | Are they Bluetooth |
| Answer: | The ones I received had the red middle |
Product features
Amber In-Wall Speaker 6.5-inch 3-way Carbon Fiber Column with Ribbon Tweeter
Rather than cluttering the room with large box speakers trailing speaker wires, the speakers are virtually invisible, while filling the room with high fidelity audio. Featuring a removable and paintable grille, this 3-way speaker uses a carbon fiber woofer cone with rubber surround for deep, impactful bass, a carbon fiber mid-range driver for tight, articulate mids, and a ribbon tweeter for sweeter and smoother high frequencies.
Ribbon Tweeter
Ribbon Tweeter: A ribbon tweeter is composed of a very thin metal diaphragm suspended in a powerful magnetic field. It is capable of very high acceleration, which means that it is very responsive to musical nuances. Ribbon tweeters have a wide horizontal dispersion and a very tight vertical dispersion, thereby increasing the size of the audio 'sweet spot'.
Carbon Fiber Drivers
Carbon Fiber Drivers: Carbon fiber is a very lightweight and rigid material, making it ideal for speaker drivers. The lightweight ensures that the driver can respond quickly to musical nuances, while the additional rigidity results in improved accuracy and a flatter frequency response.
High Frequency Attenuator
High Frequency Attenuator: The high-frequency attenuator can reduce high frequencies by 0, -3, or -6 dB. This allows you to fine tune the speaker's high-end response to compensate for a particularly 'bright' listening.
Magnetic Grille
Magnetic Grille: The removable grille attaches to the speaker using powerful magnets, to ensure that the powerful bass does not cause rattle. The grille is paintable and features a slim bezel, allowing it to more easily blend into your home's decor.
Polk Audio MC60 2-Way in-Ceiling 6.5" Speaker (Single) | Dynamic Built-in Audio | Perfect for Humid Indoor/Enclosed Areas | Bathrooms, Kitchens, Patios White
Polk Audio
Product description
Experience rich, engaging sound from speakers that disappear into your room. Polk's MC60 speaker installs flush in your ceiling for a sleek, attractive look. The 3/4" tweeter lets you aim the high frequencies for the clearest sound in your room. The 6-1/2" woofer provides smooth bass and mid-bass. Specially tuned for excellent ambient performance, with superb detail and natural musicality, even at low volume. Polk’s proprietary, patented Dynamic Balance® technology allows our engineers to design out distortion-causing driver and system resonances, so you only hear the good sounds. And this speaker's moisture-resistant design means you can enjoy it in your kitchen, bathroom, or even outdoors, installed under the eaves.
- EXPERIENCE DYNAMIC BUILT-IN SOUND with the in-ceiling MC60 speaker, perfect for multi-zone audio systems. Precision tuned to create excellent AMBIENT ACOUSTIC PERFORMANCES WITH EXTRAORDINARY DETAIL AND NATURAL MUSICALITY, EVEN AT LOW VOLUME
- Equipped with Dynamic Balance technology & superior components - a 6.5" midrange and 0.75" aim-ready swivel tweeter provide SMOOTH, WIDE-RANGE RESPONSE AND CLEAR, DETAILED HIGHS, ENSURING A UNIFORM SOUND COVERAGE IN LARGER ROOMS TOO
- LISTEN TO YOUR FAVORITE MUSIC IN ANY INDOOR OR ENCLOSED SPACE including a bathroom, kitchen, sunroom, or a covered porch with the speaker's MOISTURE-RESISTANT DESIGN featuring rustproof stainless-steel hardware and durable butyl rubber surrounds
- SIMPLE SETUP - Easy one-cut, drop-in installation with Perfect Fit templates, a precision flange, pre-construction brackets (sold separately), and rotating cams to secure the speaker and ensure vibration-free efficiency without any extra assembly
- Polk’s UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP has made it one of the most trusted names in home audio. Bring out the best in surround sound systems and acoustic excellence, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART!
User questions & answers
| Question: | Are these passive, constant resistance speakers |
| Answer: | Hello, Yes, they are passive speakers. Like the majority of moving coil type speakers with crossover networks the speaker's impedance is a function of the frequency it is reproducing. |
| Question: | This was one speaker (with a tweeter and a mid range in one unit) this is not two in wall speakers |
| Answer: | No this is one speaker in total... |
| Question: | Any recommendation for a receiver that can go well with these speakers |
| Answer: | I'm using a Niles SI-1230 for my whole house audio with these and they sound excellent. |
| Question: | Its A Pair or just one speaker |
| Answer: | It is a pair of speakers |
3 Inch Tweeter Speaker 20 Watt Audio Stereo Speakers 8 ohm High-pitched Bookshelf Loudspeaker Design DIY Home Theater for Audiophiles 74MM (8Ω)
Facmogu
Product description
Specifications:
Diameter: 2.9 inch/ 74 mm
Impedance: 8 ohm
Rated Power: 20W
Sensitivity: 91dB
Speaker's Height: 1.18"/ 30 mm
Acoustic Membrane Category: High-quality silk fiber membrane
Frequency Range: 1KHZ-25KHZ
Hole Size: through-hole 1.6"/ 43mm, outer diameter 2.9"/ 74mm, sink hole 2.95"/ 75mm, counter bore depth 0.15"/ 4mm
Voice Coil Wire: ACCAW wire strong penetration
Applications: Audiophile speakers, bookshelf stereo, Hi-Fi 5.1 speakers
Features: strong penetration, gentle, pure, delicate, sweet, mellow nature
Package Includes:
1 * 8Ω Tweeter Speaker
- 1KHZ-30KHZ frequency response 20W high rated power, 8 ohm impedance, 25 pin strong maganetic high-pitched sound, sensitivity is 91dB.
- Featured ACCAW wires and high-quality paper coating cone with sealed back design surround that provides a strong foundation for a penetrating sound.
- 2.9"/ 74mm in overall diameter, 1.6"/ 43mm in through-hole, 0.15"/ 4mm hole depth. Drill a round hole then place it perfectly, easy to setup.
- Applications: audiophile speakers, bookshelf audio stereo, Hi-Fi 5.1 speakers ect.
- Please note that just 1 pc speaker will be included if you order one.
User questions & answers
| Question: | Does these tweeters include the capacitor |
| Answer: | No. Single Tweeter |
| Question: | What terminal is the positive pole |
| Answer: | I wanna say no. |
| Question: | What capacitor is needed for this tweeter |
| Answer: | 4ohms |
Polk Audio RC85i 2-way Premium In-Wall 8"-Speakers (Pair) | Perfect-for Damp-and Humid Indoor/Outdoor Placement (White, Paintable-Grille)
Polk Audio
Product description
Build a completely stealth, in-wall home theater with the RC85i as left, right or center channels and add a pair or more of RC65i as surrounds, or complete a more traditional speaker system with additional multi-zone sound. Built-in audio within reach with easy installation in 3 steps - cut a hole, feed the wires through, and simply drop the speaker in. The rotating cams secure the speakers safely and ensure vibration-free efficiency with no extra assembly or mess. Paintable grilles allow the RC85i to blend in perfectly with the decor, virtually making them disappear. Dynamic Balance drivers and aimable swivel tweeters provide realistic imaging and deliver full, clear sound for movies, music, sports and video games, in any listening position. Timbre-matched with other Polk Audio speakers for seamless blending and exceptional audio clarity when used in a home theater setup.
The Polk RC85i utilizes an eight-inch dynamic-balance, mineral filled polymer-composite cone with a rubber surround that outlasts cheaper foam surrounds, as well as a one-inch dynamic-balance, metalized soft dome tweeter with a swivel mount. The swivel-mounted tweeter is aimable for direct high frequency control that ensures spacious imaging with amazing clarity, and well-balanced sound in any listening position, even off-axis listening positions, rather than in just a small sweet spot.
Constructed of durable, moisture resistant materials, the RC85i is safe for use in bathrooms, kitchens, saunas, or even under outdoor eaves, and features a wide-dispersion design for even sound-coverage throughout even large rooms. The RC85i also features infinite baffle tuning which uses the virtual enclosure of in-wall space for superior bass response, and is timbre-matched to the Polk Audio Monitor Series for seamless, enveloping imaging when used in a home theater system.
What's in the Box
RC85i speakers (pair), 2 grilles, cardboard template, owner's manual, and registration card.
- HEAR SEAMLESS AUDIO QUALITY AND POLK'S EXCELLENT SOUND REPRODUCTION with these timbre-matched discrete recessed speakers that elevate the sound quality, DELIVERING DEPTH OF MUSIC AND CLEAR, CRISP DIALOGUE
- Pair with our RTI Series speakers for seamless imaging or ADD TO YOUR EXISTING HOME THEATER SYSTEM or build your own Polk collection, and enjoy the SAME GREAT POLK SURROUND SOUND EVERYWHERE
- EXPERIENCE MORE BALANCED & LIFELIKE SOUND – Features an 8” dynamic-balance woofer & a 1” tweeter for adding more depth & detail to your music. Mineral-filled polymer cone & strong composite driver baskets create wider dispersion for EVEN-SOUND COVERAGE
- THE RUBBER SEAL DRIVES better response and PREVENTS MOISTURE ACCESS, a key feature for USE IN A BATHROOM, KITCHEN, SAUNA AND COVERED PORCH
- OUT OF THE BOX & RECESSED INTO THE WALL - no mess, no extra assembly - in 3 simple steps QUICKLY & EASILY INSTALL these speakers. Leave the paintable aluminum grilles as is or spray paint to MATCH YOUR EXISTING INTERIOR and virtually make them disappear
- Polk's UNWAVERING COMMITMENT, RELIABILITY, AND CRAFTSMANSHIP, has made it one of the most trusted names in home audio speakers and entertainment systems. They bring out the BEST IN TECHNOLOGY, so you can SIT BACK, RELAX AND LISTEN WITH YOUR HEART!
User questions & answers
| Question: | can I paint it with my wall color |
| Answer: | This is a good question to ask Polk direct. When you receive this system out of the box, It's already program from the factory to react within it'self. In the instruction that comes with the system it does mention these codes can be change. Be safe and ask the pro's who design the system. |
| Question: | I need them for a concrete wall. is their any problem ? what's the depth of the hole I need to make |
| Answer: | I would think so, go to the Polk website and contact them. |
| Question: | Do you need a subwoofer for these speakers? Or do they sound ok without it |
| Answer: | After struggling and struggling with this same feature (I live in a college town. The college kids were using the unsecured hotspot created by the magnifi to make wifi telephone calls, thus blocking my phone and using up all my router bandwidth ) I found a solution. I unplugged the magnifi, put it in a box, and threw it in the town dump. I then went out and bought a new sound bar that cost 1/2 as much as the Polk that could only be updated when I specifically wanted to update it. I found this to be the perfect solution to a problem the polk WILL NOT fix, WILL NOT assist the customer when asked for help either thru their customer support or their technical support. Now I go around telling anyone who will listen the absolute truth about the lack of support I got from polk. You can do this also. |
| Question: | what is the depth needed in the wall |
| Answer: | Can I hook a sound bar directly to my tv |
Product features
Low Profile Performance
Paintable grilles let you build them in, and then forget all about them; RCi Series speakers practically disappear into any room.
Virtual Enclosure
With infinite baffle tuning, RCi speakers utilize the “virtual enclosure” of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
Timbre-Matching
RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
Streamlined Design
Klippel motor optimization uses laser measurement technology to ensure a smooth excursion path at either end of the volume spectrum for uniform performance at both low and high volumes.
Superior Components
Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms, transitional spaces or even under eaves or in the ceiling of an enclosed porch. (RCi series are not suitable for exposed outdoor use. For outdoor speaker fun, use our Atrium Series.)
Simple Setup
Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets; achieve secure, vibration-free efficiency with a simple turn of the patented Rotating Cam system.
Micca M-8C 2-Way in Ceiling in Wall Speaker, 8 Inch Woofer, 1-Inch Pivoting Silk Dome Tweeter, 9.4-Inch Cutout Diameter, Each, White
Micca
Product description
Note: This listing is for one speaker, buy as many as needed Micca M-Series of in-wall and in-ceiling speakers have been designed for optimal performance in a wide variety of home Entertainment applications, from providing relaxed background music, to a high impact channel home theater system. Built with high quality components and rigorously tested design, M-Series speakers deliver exceptional value and are well reviewed by owners and critics. Dynamic and balanced The M-8C is a 2-way in-ceiling/wall speaker with a high excursion 8" Poly woofer and a 1" Soft dome tweeter in co-axial arrangement. This combination provides great flexibility in terms of application and suitability to different music tastes. In addition to smooth and natural vocals, the 8" Woofer is capable of robust bass output. This allow the M-8C to be used without the need for a subwoofer in many installations, or seamless integration if a subwoofer is used. Imaging and clarity The 1" Soft dome tweeter provides abundant detail and clarity, generating solid and focused imaging for all sound sources in a spacious sound stage. Designed for a broadened listening sweet spot, The tweeter employs a diffuser to assist off-axis response as well as a pivoting mechanism to achieve proper aiming. Perfect integration between the tweeter and woofer is achieved through a 6dB crossover network. Once installed and setup, The M-8C projects a realistic sound stage with excellent resolution. Specifications- woofer: 8" Mica-polypropylene cone, butyl rubber surround- tweeter: 1" Pivoting silk dome, Ferro fluid cooled- crossover: 6dB/Octave- frequency response: 40Hz-20kHz- impedance: 8 ohms- Sensitivity: 90dB 1W/1M- power handling: 100 watts (each)- outer diameter: 10.75"- cutout diameter: 9.375"- mounting depth: 3.6".
- 2-way in-ceiling speaker, 9.4-inch cutout diameter, with a high excursion 8-inch poly woofer and a 1-inch soft dome tweeter
- Perfect integration between the tweeter and woofer is achieved through a 6dB crossover network
- Smooth and natural sound signature with robust bass output for impactful listening experience
- Designed for optimal performance in a wide variety of home entertainment applications
- Easy to install and can be painted to blend into any decor
User questions & answers
| Question: | Micca doesn't make towers with 8 inch drivers. I was thinking of buying these and building wooden towers using mdf or something. Bad idea |
| Answer: | If you are wanting a two way system with a single 8" and tweeter, it should work fine. I'd stay away from any kind of venting unless you have reliable Thiel-Small parameters, but I would definitely recommend stuffing the box with AcoustiStuff or similar. I don't recall if Micca published T-S numbers for the woofer, but since it's made to go in a wall, I presume it's designed for a fairly forgiving infinite baffle alignment. Good luck! |
| Question: | \Which makes a better frontspeaker set up. 3 or these or 1 MTM with a 6.5 or 8 for left and right? How about these for rear speakers too. I like the idea of 5 identical speakers, but not if this isn't a suitable main (with a sub of course |
| Answer: | I went with 8" for front right and two rears and the dual 5.25 for center. If I were to do it again I would have done two 8s for the center. The duals sound good but need a little more of the lower frequencies |
| Question: | Has anyone used them in a home theater, preferably in an Dolby Atmos setup |
| Answer: | I'm using 4 of the 8" as Atmos speakers in a 7.1.4 configuration. I'm very happy with them as Atmos speakers. |
| Question: | Do you need a speaker box in the ceiling to mount these or do you just cut a hole in the drywall and install them |
| Answer: | Its been a while since I installed mine but I do recall the instructions telling you to allow a moderate amount of space around the speaker; something like 1 foot by 1 foot. You do not specifically need a speaker box but your ceiling construction will affect the acoustics so if you find you have no bass, you may need some type of enclosure or baffle behind the speaker. I have four of these speakers installed in a 8 foot flat ceiling which has my attic space open to it and they sound great; one speaker mounting hole is secured to a 2x4 attic beam and the remaining mounting holes are secured to just the drywall. I left the fiberglass insulation in the attic so that it rested on the back of the speaker and again, the speakers sound really good. I also have a 10 inch subwoofer in the living area to handle the real low-end sound but these speakers provide a solid thump which sounds great. |
Product features
Micca M-8C 2-Way In-Ceiling Speaker
The M-8C is a 2-way in-wall speaker with a high excursion 8 inch poly woofer and a 1 inch soft dome tweeter. This combination provides the utmost flexibility in terms of configuration and suitability to different types of audio tastes. From providing relaxed background music to a high impact multi-channel home theater system, the M-8C is built with carefully selected components and rigorous design to deliver exceptional value and performance.
Simple to install and paintable to match existing wall color, the M-8C is an ideal way to add high quality sound to a room without taking up any additional space.
Poly-Mica Woofer
In addition to smooth and natural vocals, the 8 inch woofer is capable of robust bass output, allowing the M-8C to be used without the need for a subwoofer in many applications.
Pivoting Silk Dome Tweeter
The 1-inch silk dome tweeter generates abundant detail and clarity, projecting a solid and focused image for all sources. Pivoting design means the tweeter can be aimed for a spacious sound stage.
Advanced Crossover Design
Perfect integration between the tweeter and woofer is achieved through a 6dB crossover network that ensures coherent transition in the critical upper midrange region.
Easy Installation
Use the included template to mark and cut the mounting hole with a drywall knife. Built-in mounting tabs make installation a breeze. Requiring only a screw driver, the mounting tabs securely grab onto surrounding drywall.
4x10 Inch Horn Tweeter Speaker - Heavy Duty 200 Watt High Power Horn Audio Tweeter System w/ 25mm Voice Coil, 20 Oz Magnet Structure, 102 dB, 8 Ohm Impedance - Pyle PH391
Pyle
Product description
The Pyle-PH391 Tweeters are at the top of their class. Ranking at the top of consumer list's for both affordability and durability, these 4"x10" compression horn tweeters pack quite a punch.
- 200 WATT POWER: This high powered audio projection horn tweeter system has a maximum power output of 200-watt peak power so you can play your favorite tracks as loud as you want and with style
- 1kHz - 15 kHz FREQUENCY RESPONSE: This car horn tweeter speaker has a frequency response of 1kHz - 15 kHz that will complete your current car woofer enclosure system for full-range stereo sound reproduction
- 8 OHM IMPEDANCE: This car tweeter has 102dB/w/m sensitivity and 8-ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- 25mm VOICE COIL: Pyle Pro follows the standard size for most car stereo systems and created this 4” x 10” horn car audio tweeter speaker with 25mm voice coil size
- 20 OZ MAGNET: This tweeter has a 20 oz magnet structure w/ heavy-duty housing that provides a strong foundation. It is super easy to install in your vehicle’s sound system. Total dimension measures 4.3” H x 10.6” W x 8.25” D
User questions & answers
| Question: | Can you use these for a house stereo |
| Answer: | No since bmw have their speakers and tweeters glued to the plastic frame and not the metal. You would have to buy and adaptor kit or get it installed customized by someone. |
| Question: | Can I put this under the hood of my car |
| Answer: | Yea the external part does come off. |
| Question: | Is it loud |
| Answer: | Yes, 2 tweeters and 2 crossovers. |
| Question: | Is this sold as a pair, or is it each |
| Answer: | Yes they do but I would recommend a 4 channel amplifier. They don't sound amazing on stereo but they do on an amplifier |
Product features
4'' x 10'' Horn Tweeter
- Max Power Rating: 200 Watts
- 20 oz Magnet
- Sensitivity: 102dB @ 1W/1M
- Frequency Response: 1kHz - 15kHz
Latest Reviews
View all
Infrared Heat Pads
- Updated: 13.02.2023
- Read reviews
Huffy Mountain Bike Frames
- Updated: 26.07.2023
- Read reviews
Heat Protector For Hairs
- Updated: 16.05.2023
- Read reviews
Art Portfolio Book
- Updated: 24.07.2023
- Read reviews
Nickelodeon Teenage Mutant Ninja Turtles Teenage Mutant Ninja Turtles Kid Watches
- Updated: 21.07.2023
- Read reviews