Product description

3-Way Electronic Crossover Hi-Pass Crossover: 32Hz-800Hz For Front & Rear Channels X10 Frequency Multiplier For Front Channel Low-Pass Crossover: 50Hz-160Hz For Subwoofer Channel 18dB Per Octave Crossover Slope Variable Bass Frequency: 40Hz-120kHz Boost Level: 0-12dB Parallel Input Switch, Mixed In/Out Switch Remote Subwoofer Level Control Power On LED Indicator Dimensions: 7.5H x 7W x 1.4D

• AUDIO CROSSOVER: Lanzar Vibe 3 way electronic crossover network features hi-pass and low-pass crossover. Hi-pass crossover has 32Hz - 800 kHz frequency response for front and rear channels. Low-pass crossover has 50Hz - 160 kHz for subwoofer channel
• POWER LED INDICATOR: This indicator will light up when switching power supply is activated, and the unit is operational. Also, pack with remote subwoofer level control and parallel input switch, mixed in/out switch
• SUBWOOFER FREQUENCY CONTROL: The Vibe X6 crossover network series gives you complete control of your sound with the stereo or mono switch. The subwoofer channel between 50 hz and 160 hz is for the selection of the low-pass crossover frequency
• 12dB OCTAVE SLOPE: Your amplifier needs to be in order to make your speakers work their best. Lanzar Vibe X6 series has an exceptional 12dB per octave crossover slope to complete the package
• SIZE: Lanzar upgraded audio crossover that measures 7.5''H x 7''W x 1.4''D. The X10 frequency multiplier for front channel, 40Hz - 120 kHz variable bass frequency provides full range and control of the speakers’ performance

Product description

Ride around town accompanied by your favorite high-quality tunes. Bump up your current audio system with this Lanzar Vibe 3-Way Electronic Crossover Network, complete with remote subwoofer control. Your audio system will thank you once you've connected this 3-way crossover unit. Designed to optimize frequencies, this device features hi-pass crossover for front and rear channels, plus low-pass crossover for subwoofer channel control. The high-performance crossover network provides loud sound perfect for jamming out to your favorite artists. Once installed, you'll know when the unit is active thanks to the bright LED power on light. Measuring only 1.4 inches deep, 7 inches wide, and 7.5 inches tall, this compact unit is easy to install. Achieve complete control of your sound with the stereo or mono switch and control your subwoofer with the included remote control. If you're in the market to enhance your audio system, look no further than the Lanzar 3-Way Crossover Network.

• CROSSOVER NETWORK: Optimizes frequencies by dividing audio signal to multiple speaker drivers
• HI AND LOW PASS: Features hi-pass crossover for front and rear channels, plus low-pass crossover for subwoofer
• COMPLETE CONTROL: Offers complete control of sound audio with stereo or mono switch
• POWER ON LIGHT: Power on LED light indicator illuminates when the unit has been activated
• SUBWOOFER REMOTE CONTROL: Subwoofer levels are easy to control with remote, plus parallel input switch and mixed in/out switch

Product description

Ride around town accompanied by your favorite high-quality tunes. Bump up your current audio system with this Lanzar Vibe 3-Way Electronic Crossover Network, complete with remote subwoofer control. Your audio system will thank you once you've connected this 3-way crossover unit. Designed to optimize frequencies, this device features hi-pass crossover for front and rear channels, plus low-pass crossover for subwoofer channel control. The high-performance crossover network provides loud sound perfect for jamming out to your favorite artists. Once installed, you'll know when the unit is active thanks to the bright LED power on light. Measuring only 1.4 inches deep, 7 inches wide, and 7.5 inches tall, this compact unit is easy to install. Achieve complete control of your sound with the stereo or mono switch and control your subwoofer with the included remote control. If you're in the market to enhance your audio system, look no further than the Lanzar 3-Way Crossover Network.

• CROSSOVER NETWORK: Optimizes frequencies by dividing audio signal to multiple speaker drivers
• HI AND LOW PASS: Features hi-pass crossover for front and rear channels, plus low-pass crossover for subwoofer
• COMPLETE CONTROL: Offers complete control of sound audio with stereo or mono switch
• POWER ON LIGHT: Power on LED light indicator illuminates when the unit has been activated
• SUBWOOFER REMOTE CONTROL: Subwoofer levels are easy to control with remote, plus parallel input switch and mixed in/out switch

Product description

2, 4 or 6 Channel Input via Gold Plated RCA Jacks 10 Channel Output: Front High and Mid/Rear High and Mid/Subwoofer Remote Subwoofer Level Control Subwoofer Boost with Frequency and Gain Control Individual Gain Control per Stereo Channel Phase Shift for Subwoofer and High Pass Channels Line Output for System Expansion Options Trunk Mount with Discrete Wire Connections Blue Light Illuminated Aluminum Panels Isolated DC-to-DC Power Supply Frequency Response: 10Hz-30kHz Dimensions: 1.50-InchH x 9.65-InchW x 10.63-InchD

• 2, 4 or 6 Channel Input via Gold Plated RCA Jacks
• 10 Channel Output - Front High and Mid/Rear High and Mid/Subwoofer
• Remote Subwoofer Level Control
• Subwoofer Boost with Frequency and Gain Control
• Individual Gain Control per Stereo Channel

Product description

The VIBE730P is a half-DIN 7-band parametric equalizer from Lanzar. Its equipped with 2 channel RCA input, plus an auxiliary input. Outputs over six channels, stereo for front, back, and subwoofer. Each control is a smooth rotary fader with illumination. Adjust the sound to your exact specifications and get the most out of your audio system. Mounting hardware included - it easily installs in your vehicles dashboard for convenient access.

• 7-Band Graphic Equalizer - Frequency Gain Control - Illuminated Rotary Controls
• 6-Channel 7 Volt RCA Outputs (Front/Rear/Subwoofer) - Fully Adjustable crossover - Half Din Dash Mount
• 2-Channel RCA Source & AUX Input - Built in 6 channel 7 Volt Line Driver - Mounting Hardware Included
• Output Volume Control - Selectable Source & AUX Input Selector - DC 12 Volt
• Input Gain Adjustments - Full System Fader Adjustment - Dimensions: 7''W x 4.52''D x 1.10''H

Product description

VINTAGE 1992 - 1998 - ANALOG ELECTRONIC CROSSOVER - RARE 3 WAY OPTICALLY ISOLATED ELECTRONIC CROSSOVER CONTINUOUSLY ADJUSTABLE IN 3 FREQUENCY RANGES: 50HZ - 800HZ 50HZ - 8000HZ 500HZ - 8000HZ SWITCHABLE STEREO/MONO BASS MADE IN USA

• MADE IN THE USA
• 3 Way Variable Crossover
• FREQUENCY RANGES:50HZ - 800HZ, 50HZ - 8000HZ, 500HZ - 8000HZ
• SWITCHABLE STEREO/MONO BASS

Product description

VINTAGE 1992 - 1998 - ANALOG ELECTRONIC CROSSOVER - RARE 2 WAY OPTICALLY ISOLATED ELECTRONIC CROSSOVER CONTINUOUSLY ADJUSTABLE IN 3 FREQUENCY RANGES: 50HZ - 800HZ SWITCHABLE MADE IN USA

• MADE IN THE USA
• 2 Way Variable Crossover
• FREQUENCY RANGES:50HZ - 800HZ
• Independent Level Controls

Product description

Lanzar Model : VCT2610

6000 Watt 2 Channel High Power MOSFET Amplifier

3000W x 2 Output at 4 Ohms

6000W x 1 Bridged Output at 2 Ohms2 Ohm Stable

MOSFET Power Supply

Variable Hi-Pass : 40 Hz-250 Hz

Variable Low-Pass : 40 Hz-250 Hz

Variable Input Level (Gain) Control : 6V-200mV

Variable Bass Boost : 0-18dB

Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave

Sub Sonic Switch

Thermal / Overload / Short Circuit Protection

Soft Turn On/Off

Power & Protection LED Indicator

Low Level RCA Input : 10K Ohms

Line Level RCA Output

Frequency Response : 15 Hz-30K Hz

Signal to Noise Ratio: >95dB

THD:0.1 %

2x60 Amp Maxi Type Fuse

Slim Size Amplifier Design For Easy Installation

Dimensions: 10.63''W x1.78''H x 21.97''L

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63''W x1.78''H x 21.97''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	What wattage do these actually do
Answer:	4 ga is the biggest to fit, the amp has the crummy tab plates and is NOT 1 ohm stable. 4 15's will kill this amp
Question:	Will this amp run 2 1200 watt (10”) audiobahn downfire subs
Answer:	This amp over heats to much. Get yourself a class D amp
Question:	What wire gauge for this amp i pushin
Answer:	Hi, you may use a 6.5 sub or speaker as long as it is a below the wattage of this amp ( 3000 watts) at 2 to 8 ohms.
Question:	Can this amp power 2 12-inch Power Acoustik 2500W subwoofers
Answer:	I wouldn't recommend it because the app doesn't like to put out its peak power or even when measured it gave about 3000 Watts peak and when that's converted into RMS it's approximately 1767w rms add two speakers I have a peak of 1200 watts and RMS of about 1696.8w you'll be pushing max power transfer. Which is good unless your subs are rated more then that. What ever peek is x .707 gives you RMS so take that and work it in

Product features

2-Channel High Power MOSFET Amplifier

The Lanzar 6000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service.

• 3000W x 2 Output at 4 Ohms, 6000W x 1 Bridged Output at 2 Ohms 2 Ohm Stable
• MOSFET Power Supply, Variable Hi-Pass : 40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz, Variable Input Level (Gain) Control : 6V-200mV
• Variable Bass Boost : 0-18dB, Variable Subsonic Filter : 10Hz~100Hz, 24dB/Octave
• Sub Sonic Switch, Thermal / Overload / Short Circuit Protection, Power & Protection LED Indicator, Low Level RCA Input : 10K Ohms
• Line Level RCA Output, Frequency Response : 15 Hz-30K Hz
• Signal to Noise Ratio: >95dB, THD:0.1 %
• 2x60 Amp Maxi Type Fuse, Slim Size Amplifier Design For Easy Installation

Product description

Lanzar Model : VCT2210 2000 Watt 2 Channel High Power MOSFET Amplifier 1000W x 2 Output @ 2 Ohms 2000W x 1 Bridged Output @ 4 Ohms 2 Ohm Stable MOSFET Power Supply High/Low/Full Crossover Switch Variable Hi-Pass : 40 Hz-250 Hz Variable Low-Pass:40 Hz-250 Hz Variable Input Level (Gain) Control : 6V-200mV Bass Boost Selector : 0/+18dB Thermal / Overload / Short Circuit Protection Soft Turn On/Off Power & Protection LED Indicator Low Level RCA Input : 10K Ohms Line Level RCA Output Frequency Response : 15 Hz-30K Hz Signal to Noise Ratio: >95dB THD:0.1 % 2x40 Amp Maxi Type Fuse Slim Size Amplifier Design For Easy Installation Dimensions: 10.63''W x1.75''H x 12''L The Lanzar 2000 WATTS 2 Channel MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 1000W x 2 output at 2 ohms or 2000W x 1 bridged output at 4 ohms for a high quality audio.
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss.
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output.
• SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
• SLIM SIZE DESIGN: Measuring only 10.63''W x1.75''H x 12''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation.

User questions & answers

Question:	I'm hooking up a second amp does this amp have RCA out so i can run the rca into the the other amp
Answer:	This bag was designed for men, but we invite anybody to enjoy its style.
Question:	How would this be on a power acoustik 12, dual 2 ohm 3500 watt peak 1750 rms
Answer:	The Buckner Top Zip Workbag weighs around 1.26 kg.
Question:	Hi,will this push my 15in skar zvx in a custom 32 htz box
Answer:	I'm not sure. The material seems water resistant but I can t say for sure. I feel confident that if you spill a liquid it wont go thru but cant say what will happen if you leave it out in the rain.
Question:	Is this really a 2 channel amp the photo shows it as a 4 channel
Answer:	My laptop is 16 3/8" x 11" x 1 1/4" and doesn't leave much room to spare. Not 100% sure with that extra 3/4" you have that the bag will close properly...but it will be close.

Product description

Lanzar Model : HTG157

3000 Watt 2 Ohm Stable Mono Block Mosfet Amplifier

1 x 650W RMS @ 4 OHMS

1 x 1250W Peak @ 4OHMS

1 x 1500W RMS @ 2 OHMS

1 x 3000W Max @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

2 Ohm Stable

Nickel RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Freq. Response:10Hz~45KHz

LPF Freq. Response: 50Hz-250Hz

HPF Freq Response:80HZ

Fuse: 40A x1

Dimensions:12.99''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp
• GREAT DEAL: Often a monoblock amp comes with a high price tag Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels

User questions & answers

Question:	Can I use this for my
Answer:	Yes, 2 fuse
Question:	Will this push 2 12" kicker comp r at 2 ohm
Answer:	Bought it a year ago and it sat in my closet. Never opened and went to install it. It didnt work. This is crap
Question:	do it have any fuse
Answer:	Yes
Question:	i have no sound.how do you get it to work
Answer:	….if the amp actually worked, yes. Sadly mine did not, nor did the replacement.

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio

• 1 x 650W RMS @ 4 OHMS
• 1 x 1250W Peak @ 4OHMS
• 1 x 1500W RMS @ 2 OHMS
• 1 x 3000W Max @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• 2 Ohm Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls

• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: <0.01%.
• S/N Ratio: >90dB
• Freq. Response:10Hz~45KHz
• LPF Freq. Response: 50Hz-250Hz
• HPF Freq Response:80HZ
• Fuse: 40A x1

Product description

Lanzar Model : HTG237

1000 Watt 2 Channel Mosfet Amplifier

2 x 125W RMS @ 4 OHMS

2 x 500W Max @ 4 OHMS

1 x 1000W Max @ 4 OHMS Bridged

2 x 225W RMS @ 2 OHMS

Electronic Crossover Network

Bass Boost Circuit

Bridgeable at 4 Ohms

2 Ohm Stereo Stable

Nickle RCA Inputs

Line Outs for Left and Right Channel

Low Pass Filter Controls

High Pass Filter Controls

Power and Protection LED Indicators

Soft Turn-on/Turn-off

THD: <0.01%.

S/N Ratio: >90dB

Channel Separation: >65dB

Freq. Response: 10Hz~45KHz

HPF Freq. Response: 80KHz

LPF Freq. Response: 50Hz-250Hz

Subwoofer Level Control

Fuse: 25A x 1

Dimensions: 9.84''(L) x 2.24''(H) x 8.81''(W)

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.

User questions & answers

Question:	Would this particular amp b ideal for 2 6.5s and 2 4x6s
Answer:	I highly doubt youll get 400w out of this amp let alone what it clams. I recommend an apcl15001d if you want real power for cheap. This isnt worth it
Question:	will this be good for 2 12 mtx termenior 400 rms
Answer:	Seperate your amps for better sound comtrol the four channel will run your coaxial speaker and run your tweeters then run a mono block single sub amp
Question:	Is this amp enough for 2 12 kicker cvr
Answer:	Yes, a direct replacement.
Question:	hi, i am looking an amplifier to conect 2 coaxials speakers, two tweeters and a subwoofer ¿how many channels should the amp have
Answer:	Most all of the USA Gibson Les Paul lineup.

Product description

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• Electronic Crossover Network
• Bass Boost Circuitry
• 2 Ohm Stereo Stable
• RCA InputsLine Output (L/R) Channels
• Low + High Pass Filter Controls
• Power + Protection LED Indicators
• Soft Turn ON/OFF
• 1 x 650 Watt RMS @ 4 Ohm
• 1 x 1250 Watt Peak @ 4 Ohm
• 1 x 1500 Watt RMS @ 2 Ohm
• 1 x 2000 Watt Max @ 2 Ohm
• T.H.D.: <0.01%
• S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz
• HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz
• Fuse: 40A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''
• Sold as : 1

• AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

User questions & answers

Question:	I have two infinity refrence subwoofer's. peaks at 2400 watts and 2.4 ohms for each speaker. so 4.8 ohms. think this amp will push it
Answer:	It'll push them but it'll over heat... I have two 15s that peak at 2000, with a nice size capacitor but it still had a hard time performing and kept shutting off... I bought another one, put one on each sub and BOOM BOOM BOOM is all my neighborhood hears when I drive down the street... Plus I changed my alternator to a higher amperage alternator and added a secondary dry cell battery...
Question:	My sub is a kicker cvr 12 4 ohm, 50-400 watts rms (200 watts per coil), can this work
Answer:	Yes, I was running 2 kicker 12s, then went to the 3000 wat version.
Question:	My subs are 4ohm will this work
Answer:	No
Question:	Will it do well without over heating with a 1400 watt pioneer sub
Answer:	I think it depends on the box you go with

Product features

Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm

• Electronic Crossover Network, Bass Boost Circuitry
• 2 Ohm Stable, RCA Inputs
• Line Output (L/R) Channels, Low + High Pass Filter Controls
• Power + Protection LED Indicators, Soft Turn ON/OFF
• 1 x 350 Watt RMS 4 Ohm, 1 x 1250 Watt Peak 4 Ohm
• 1 x 900 Watt RMS 2 Ohm, 1 x 2000 Watt Max 2 Ohm
• T.H.D.: <0.01%, S/N Ratio: >90dB
• Freq. Response: 10Hz - 45kHz, HPF Freq. Resp.: 80Hz
• LPF Freq. Resp.: 50Hz - 250Hz, Fuse: 30A x 1
• Dimensions (L x H x W): 13.0'' x 2.4'' x 8.8''

Product description

Lanzar Model : VCT4110

 

2000 Watt 4 Channel High Power MOSFET Amplifier

• 500W x 4 Output at 4 Ohms
• 1000W x 2 Bridged Output at 2 Ohms
• 2 Ohm Stable
• MOSFET Power Supply
• Variable Hi-Pass:40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz
• Variable Input Level (Gain) Control : 6V-200mV
• Bass Boost Switch:0-18dB
• Thermal / Overload / Short Circuit Protection
• Soft Turn On/Off
• Power & Protection LED Indicator
• Low Level RCA Input : 10K Ohms
• Line Level RCA Output
• Frequency Response : 15 Hz-30K Hz
• Signal to Noise Ratio: >95dB
• THD:0.1 %
• 2x30 Amp Maxi Type Fuse
• Slim Size Amplifier Design For Easy Installation
• Dimensions: 10.63''W x1.78''H x 14.02''L

 

The 2000 Watt 4 Channel High Power MOSFET Amplifier by Lanzar is a quality product designed and engineered to give you many years of uncompromised musical service. VECTOR series amplifiers are designed with the latest technology available, which provides headroom for even the most demanding peaks and dynamic ranges found on modern CDs and recordings.

• 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged output at 2 ohms for a high quality audio
• FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to guarantee high conductivity and minimum signal loss
• MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
• SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
• SLIM SIZE DESIGN: Measuring only 10.63'' W, 1.78'' H, and 14.02'' L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation

User questions & answers

Question:	will this amplifier push my 1000 watt Kenwood
Answer:	This backpack measures 10"L x 2.5"W x 13.25"H and can accommodate a 13" laptop.
Question:	Will this amplifier power   2) kicker 10c124 12" 600w 4omh
Answer:	The dimensions are 14 "L x 10" W x 2.25 "H.
Question:	What's the rms watts per chanel at 2 ohms
Answer:	Fossil Leathers have a 1-year warranty from the date of purchase from an authorized retailer for manufacturing defects. A POP is required to honor the warranty for leathers/jewelry.
Question:	What this class amplifier (AB, B, C, D
Answer:	Fossil leather goods have a limited one year warranty that covers against defects in material or workmanship. To honor the warranty, your product should be sent to our service center for evaluation with a dated proof of purchase.

Product features

4-Channel High Power MOSFET Amplifier

• 500W x 4 Output at 4 Ohms
• 1000W x 2 Bridged Output at 2 Ohms
• 2 Ohm Stable
• MOSFET Power Supply
• Variable Hi-Pass:40 Hz-250 Hz
• Variable Low-Pass : 40 Hz-250 Hz
• Variable Input Level (Gain) Control : 6V-200mV
• Bass Boost Switch:0-18dB
• Thermal / Overload / Short Circuit Protection
• Soft Turn On/Off

Product description

The CXR-7 is designed for sound quality audiophiles seeking to custom tailor their crossover functions and frequencies to multi-amp systems. The self powered unit features a fully isolated DC-to-DC power supply, which boasts a 7 volt line driver signal. The CXR-7 comes complete with a 14ft cable and dashboard bass remote control.

• Fully Adjustable Frequencies
• Multi-Link two CXR-7's for Additional 6 Channels of Output.Frequency Response  10Hz – 30 kHz  (-3dB)
• Adjustable Parametric Bass Equalizer with a Selectable Bass Boost
• Phase Shift-Control
• Audio Stereo/Mono Selector

User questions & answers

Question:	Is the sub input totaly independant
Answer:	Yes, it has rca thru which means it will send a full signal out regardless of the amp filter settings.
Question:	Does this crossover comes with A bass knob
Answer:	This amp would not work it's only around 160 rms a channel take a look at an Alpine or a kicker they will do rated power, the lanzars don't, 500 warts of true power will run you around $80 take a look at the Rockford fosgate prime amps if your on a small budget great power for a great price, or any alpine line will give you good clean power
Question:	It comes with the bass knob do I have to use it since I have one for my amp
Answer:	Hi, that will depend on the wattage of your speaker. This amp can handle up to 2000 watts and you may also use the bridge feature of the unit. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box VCT2210 for more details. Thank you.
Question:	So if it comes with a bass now will this work with a bass restoration processor
Answer:	If u order a 2 channel u should get one that could just be the pix